iZ SUPPORT TECHNICAL MEMO
RADAR 24 MOTHERBOARD CMOS SETUP ____________________________________
MSI 945P NEO5 MOTHERBOARD CMOS SETUP ___________
Immediately after the memory test, press to enter CMOS SETUP. (This must be done on a PC keyboard connected on the back of the RADAR or on KC24). Select LOAD FAIL-SAFE DEFAULTS, press on OK to load the defaults.
a) Select STANDARD CMOS FEATURES, press
iZ Technology Corporation
b) Make the following changes: DATE (MM:DD:YY) to current date. TIME (HH:MM:SS) to current time.

c) Press

to exit.
a) Select ADVANCED BIOS FEATURES, press
b) Make the following changes: FULL SCREEN LOGO DISPLAY to DISABLED. Select BOOT SEQUENCE, press.
c) Change boot sequence to: 1ST BOOT DEVICE to HDD-0. 2ND BOOT DEVICE to CD/DVD. 3RD BOOT DEVICE to 1ST FLOPPY DRIVE.

d) Press

again to exit.
a) Select INTEGRATED PERIPHERALS, press
b) Change HD AUDIO CONTROLLER to DISABLED
a) Select POWER MANAGEMENT, press
b) Make the following changes: POWER BUTTON FUNCTION to SUSPEND. RESTORE ON POWER LOSS to LAST STATE.
to exit. , , to save and boot RADAR.
Select SAVE & EXIT SETUP, press
End of CMOS setup for MSI 945P Neo5 Motherboard.
CMOS SETUP FOR DFI CA64-TC MOTHERBOARD __________
Immediately after the memory test, press to enter CMOS SETUP. (This must be done on a PC keyboard connected on the back of the RADAR or on KC24). Choose LOAD OPTIMIZED DEFAULTS, press , , to load the defaults.
b) Make the following changes: DATE (MM:DD:YY) to current date. TIME (HH:MM:SS) to current time. HALT ON to NO ERRORS.
b) Make the following changes: FIRST BOOT DEVICE to HDD-0. SECOND BOOT DEVICE to FLOPPY. THIRD BOOT DEVICE to DISABLED. BOOT OTHER DEVICE to DISABLED. BOOT UP FLOPPY SEEK to DISABLED.
a) Select ADVANCED CHIPSET FEATURES, press
b) Make the following changes: DRAM CLOCK to HOST CLK. USB KEYBOARD SUPPORT to ENABLED.
b) Change ONBOARD LEGACY AUDIO to DISABLED.
a) Select PNP/PCI CONFIGURATIONS, press
b) Make the following changes: RESOURCES CONTROLLED BY to MANUAL. Select IRQ RESOURCES and press.
c) Change IRQ-5 ASSIGNED TO, LEGACY ISA.

to save and boot RADAR.

END of CMOS setup for DFI CA64-TC motherboard.
CMOS SETUP FOR EPOX EP-3VWB MOTHERBOARD ________
Immediately after the memory test, press to enter CMOS SETUP. (This must be done on a PC on KC24). keyboard connected on the back of the RADAR or Select LOAD OPTIMIZED DEFAULTS, press , , to load the defaults.
b) Make the following changes: FIRST BOOT DEVICE to HDD-0. SECOND BOOT DEVICE to FLOPPY. THIRD BOOT DEVICE to DISABLED. BOOT OTHER DEVICE to DISABLED.
b) Make the following changes: VIDEO RAM CACHEABLE to DISABLED. USB KEYBOARD SUPPORT to ENABLED.
b) Make the following changes: SOUND BLASTER to ENABLED. SB IRQ Select to IRQ 10.
c) Change IRQ-5 ASSIGNED TO, LEGACY ISA, press
END of CMOS setup for Epox EP-3VWB+ motherboard.
CMOS SETUP FOR GIGABYTE MOTHERBOARD ______________
Immediately after the memory test, press to enter CMOS SETUP. (This must be done on a PC keyboard connected on the back of the RADAR or on KC24). Select LOAD PERFORMANCE DEFAULTS, press , , to load the defaults.
a) Select BIOS FEATURES SETUP, press
b) Change BOOT SEQUENCE to C, A, SCSI.
a) Select PNP/PCI CONFIGURATION, press
b) Make the following changes: RESOURCES CONTROLLED BY to MANUAL. IRQ-5 ASSIGNED TO, LEGACY ISA.
END of CMOS setup for Gigabyte GA-6VA7+ motherboard.