Digitech Vocalist II
Deepen Your Connection with the Audience with Vocalist Live 3! An innovative tool to add to your vocals for live performance, DigiTech Brings you the Live 3 Harmony and Pitch Correction Pedal. Stomp on a switch and fill the room with natural, full-sounding vocal harmonies that adapt to the notes being played. The Live 3 keeps the lead vocals right on target with pitch correction and more pre-effects like warmth, compression, a noise gate and a 2-band EQ. Add in reverb, delay, and a built-in tune... Read more
Part Numbers: LIVE 3, LIVE3, VL3, VOCALIST LIVE 3, VOCALIST-LIVE-3, VOCALISTLIVE3, Vocalist Live 3, vl3
UPC: 0691991201936, 691991201936
[ Report abuse or wrong photo | Share your Digitech Vocalist II photo ]
Digitech Vocalist II, size: 5.8 MB
Digitech Vocalist II
Test of Digitech Vocalist II
User reviews and opinions
|funkyman888||4:34am on Tuesday, October 26th, 2010|
|A good purchase - can't go wrong with Buffalo Technologies Fast, Quiet, Great looking product, High Quality None It arrive early, and with the software it's worth the price. Easy to install and setup.|
|vinitmodi||8:38pm on Saturday, September 18th, 2010|
|Overall great drive. After researching many different brands, the Buffalo was definitely a wise choice!|
|bencs||2:24am on Tuesday, September 14th, 2010|
|Device broke after 3 months, too late to return to NewEgg. Support useless beyond the forums and manual. I purchased a Buffalo Hard Drive back in 2002 and I have never had any issues with that HD. This is what prompted me to purchase this one. Considering its price, it is a very appealing NAS for the beginner, as I was a year ago with NAS technology (not computers.|
|$marvel_46||8:47am on Friday, August 13th, 2010|
|Use as TV hard disk recorder Bought this to use with my Panasonic TX-L42D25BA LCD/LED TV to give basic PVR facilities.|
|lloydgsargent||7:36am on Friday, August 6th, 2010|
|Wanted a simple but defective network storage... Works smoothly, very simple & effective SLOOWWWWW user interface, data transfer could be faster|
|danbob||6:52am on Thursday, July 22nd, 2010|
|Not the largest space but enough for my needs Compact, easy to use, plug in and go! None so far.|
|Parsolamew||5:34pm on Saturday, June 26th, 2010|
|My saga: I purchased a Buffalo LinkStation Pr... Tech support is good about shipping you replace disk drives in 12 months, with 3 different drives..|
|Payevhizmoney||7:18am on Friday, June 25th, 2010|
|Chipset cause kernel panic in OSX 64 bit Just be aware that this drive has a chipset that cause kernel panic in OSX 64bit mode when connected using fi...|
|GuitarPlaya2000||5:56am on Saturday, June 12th, 2010|
|Upgraded to latest Firmware after months of abandonment due to crashes when transferring anything over 500mb...problem still there... Upgraded to latest Firmware after months of abandonment due to crashes when transferring anything over 500mb...problem still there...|
|waterhead37||5:24am on Thursday, June 10th, 2010|
|Handles the fast output of a NAS during backup Attractive Design","Easy To Setup","Easy to use","High Capacity","Quiet No Power Switch|
|aust_txv||2:54pm on Wednesday, May 26th, 2010|
|A good solid drive - not fancy. Sent this back with in a week I was so excited when I bought this product. Sadly it was sent back for a refund within a week as it died.|
|hreftra21||12:38am on Monday, March 15th, 2010|
|Good HDD This works fine for me - stores all my films and music, is quick and near silent. All in all at £85 its a bargain.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Vocal Harmony and Effects Processor
WARNING FOR YOUR PROTECTION PLEASE READ THE FOLLOWING:
KEEP THESE INSTRUCTIONS HEED ALL WARNINGS FOLLOW ALL INSTRUCTIONS the apparatus shall not be exposed to dripping or splashing liquid and no object filled with liquid, such as vases, shall be placed on the apparatus. CLEAN ONLY WITH A DRY CLOTH. DO NOT BLOCK ANY OF THE VENTILATION OPENINGS. INSTALL IN ACCORDANCE WITH THE MANUFACTURERS INSTRUCTIONS. DO NOT INSTALL NEAR ANY HEAT SOURCES SUCH AS RADIATORS, HEAT REGISTERS, STOVES, OR OTHER APPARATUS (INCLUDING AMPLIFIERS) THAT PRODUCE HEAT. ONLY USE ATTACHMENTS/ACCESSORIES SPECIFIED BY THE MANUFACTURER. UNPLUG THIS APPARATUS DURING LIGHTNING STORMS OR WHEN UNUSED FOR LONG PERIODS OF TIME. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong are provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Use only with the cart stand, tripod bracket, or table specified by the manufacture, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
Refer all servicing to to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. POWER ON/OFF SWITCH: The Power switch used in this piece of equipment DOES NOT break the connection from the mains. MAINS DISCONNECT: The plug shall remain readily operable. For rack-mount or installation where plug is not accessible, an all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated into the electrical installation of the rack or building.
DECLARATION OF CONFORMITY
Manufacturers Name: Manufacturers Address: declares that the product: Product name: Product option: Vocalist Live 2 all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.) DigiTech 8760 S. Sandy Parkway Sandy, Utah 84070, U.S.A.
1. 2. 3. 4. 5. 6.
For your protection, please read the following: Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturers instructions. 7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 8. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. No user serviceable parts inside. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 12. Refer to labels on the unit, including bottom cover, or other markings and pertinent information.
conforms to the following Product Specifications: Safety EMC Supplementary Information: The product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC and the EMC Directive 89/336/EEC as amended by Directive 93/68/EEC. Vice-President of Engineering - MI 8760 S. Sandy Parkway Sandy, Utah 84070, U.S.A. Date: February 1, 2007 European Contact: Your local DigiTech Sales and Service Office or Harman Music Group 8760 South Sandy Parkway Sandy, Utah, 84070 U.S.A. Ph: (801) 566-8800 Fax: (801) 568-7583 EN 60065 EN 55103-1 EN 55103-2
We at DigiTech are very proud of our products and back up each one we sell with the following warranty: 1. The warranty registration card must be mailed within ten days after purchase date to validate this warranty. 2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in materials and workmanship under normal use and service. 3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHORIZATION, where all parts and labor will be covered up to a period of one year. A Return Authorization number may be obtained from DigiTech by telephone. The company shall not be liable for any consequential damage as a result of the products use in any circuit or assembly. 4. Proof-of-purchase is considered to be the burden of the consumer. 5. DigiTech reserves the right to make changes in design, or make additions to, or improvements upon this product without incurring any obligation to install the same on products previously manufactured. 6. The consumer forfeits the benefits of this warranty if the products main assembly is opened and tampered with by anyone other than a certified DigiTech technician or, if the product is used with AC voltages outside of the range suggested by the manufacturer. 7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes nor authorizes any person to assume any obligation or liability in connection with the sale of this product. In no event shall DigiTech or its dealers be liable for special or consequential damages or from any delay in the performance of this warranty due to causes beyond their control. NOTE: The information contained in this manual is subject to change at any time without notification. Some information contained in this manual may also be inaccurate due to undocumented changes in the product or operating system since this version of the manual was completed. The information contained in this version of the owners manual supersedes all previous versions.
Table of Contents
Introduction... 1 The Vocalist Live 2 Features... 1 About musIQTM Technology.. 1. Included Items.... 2. A Guided Tour of the VocalistTM Live 2... 3. Overview.... 3 Quick Start.... 3. Front Panel.... 4 Indicator LEDs (Guitar Signal, Phantom Power,Vocal Signal). 5 Guitar Tuner LEDs... 5. Knobs... 5 Select Buttons... 6 Rear Panel... 7. Phantom Power... 7 Guitar Ground Lift... 7. Guitar In... 7 Guitar Thru.... 8. Mic/Line Input Level.... 8. Mic In... 8 Line In.... 8 Line Out L/R... 8. Mono Out... 8 Power Input.... 8
Getting Started... 9 Connect the Microphone, Guitar, and P.A. or Mixer.. 9. Set the Vocalist Live 2 Controls... 10. Set up the Mixer for Stereo Operation (If Using Two Channels of a Mixer)... 11. Common Setups.... 12. Guitar and Microphone In/Guitar Amp and P.A. Out (Mono). 12 Guitar and Microphone In/P.A. Out (Mono or Stereo). 13. Guitar and Microphone In/P.A. and Powered Monitor Out.. 14 Guitar and Mixer or Preamp in/P.A. Out.. 15. The Vocalist Live 2 Controls... 16. Harmony Mix Knob... 16. Harmony Select Buttons... 16 Compressor Knob... 17. Enhance Knob and Buttons... 17 Reverb Knob and Buttons... 18 Effects Footswitch.... 18. Harmony Footswitch... 19 Guitar Tuner.... 19 Some Usage Notes.... 20. Setting Levels on the Vocalist Live 2... 21 Troubleshooting.... 22. Specifications.... 24.
Congratulations on your purchase of the Vocalist Live 2. The Vocalist Live 2 is the worlds first processor that automatically generates live multi-part vocal harmony by analyzing guitar chord progressions. Armed with patent pending musIQ Harmony Technology (which includes both musIQ note detection and musIQ harmony generation), the VL-2 gives you accurate vocal harmonies even with complicated songs because only Vocalist Live tracks guitar chords, along with your voice.
The Vocalist Live 2 Features
musIQ harmony technology. One or two voices of automatic harmony with selectable voicings (Unison 1, Unison 2, High, Higher, Low, Lower), generated based on incoming music from your guitar. Selection of lead voice effects (Reverb, Compressor, and Enhance effects). Built-in guitar tuner. Built-in microphone preamp. Next-generation vocal pitch detection, pitch shifting, and humanization processing. +48V phantom power. 24-bit/44.1kHz audio quality.
About musIQTM Technology
musIQ is a revolutionary technology that eliminates the need to enter key and scale information into the product as it listens to the notes/chords played on a guitar and makes sure that the harmony voices fit with the music. Real-time processing discerns the individual notes and key signatures that are played to automatically generate appropriate vocal harmonies that complement the lead vocal. With musIQ, you can focus on your live singing and playing performance, and discard song programming once and for all.
The Vocalist Live 2 PS0913B Power Supply This owners manual Warranty Card
Before you get started, please make sure that the following items have been included:
The utmost care was taken while your Vocalist Live 2 was being manufactured. Everything should be included and in perfect working order. If anything is missing, contact the factory at once. Please help us become acquainted with you and your needs by completing your warranty card or registering online at www.digitech.com. It is your safeguard should a problem arise with your Vocalist Live 2. Important safety tip: Always turn on amplifiers AFTER all other connections are made to the Vocalist Live 2 and AFTER the Vocalist Live 2 is powered up.
A Guided Tour of the Vocalist Live 2
The Vocalist Live 2 is a revolutionary voice processor that creates musically correct harmonies for your singing voice that automatically change to fit with the current guitar chord and key of the music you have been playing.
Its a good idea to read this brief manual completely, but if you want to start using the Vocalist Live 2 right away, go to the Getting Started section on page 9. For more information on what the knobs and buttons do, refer to The Vocalist Live 2 Controls section on page 16. To find out about using the tuner, see the Guitar Tuner section on page 19. To locate and identify the various controls, inputs, and outputs, see the Front Panel and Rear Panel sections on pages 4 and 7.
Indicator LEDs (Guitar Signal, Phantom Power, Vocal Signal)
The indicator LEDs show the status of Phantom power (off or on) and the incoming signal levels for the guitar and microphone. The Guitar Signal and Vocal Signal LEDs light green when a signal is present, amber when the incoming signal is approaching clip (overload), and red when the incoming signal clips. For more information, see Setting Levels on the Vocalist Live 2 on page 21.
Guitar Tuner LEDs
When the guitar tuner is active, the letter and # LEDs indicate what note is being played. If the # LED lights up in addition to a letter LED, that means the note is a sharp note (like A#). The bar of eleven LEDs shows whether the note being played is slightly sharp (right of triangle), slightly flat (left of triangle), or in tune (directly below triangle).
Compressor Adding the right amount of compression smooths out incoming vocal dynamics and creates a more even vocal performance. Turn this knob clockwise to increase compression, or counter-clockwise to decrease compression. See page 17 for more information about compression. Reverb Sets the amount of reverb that is applied to the incoming microphone signal. Turn this knob clockwise to increase reverb, or counter-clockwise to decrease reverb. Select the type of reverb with the Reverb buttons, described on page 18. Enhance Enhance effects apply equalization and sweetening effects to the lead microphone signal that improve intelligibility and presence. Turn this knob clockwise to increase Enhance effects, or counter-clockwise to decrease Enhance effects. Select the type of Enhance effect with the Enhance buttons, described on page 17.
Harmony Mix Adjusts the level of the harmony vocals relative to the incoming lead vocal (your voice). Turn this knob clockwise to increase harmony levels and decrease the lead vocal, or counterclockwise to decrease harmony levels and increase the lead vocal.
These enable and disable reverbs, effects, and harmonies. See the following pages for more information: Reverb - Page 18. Enhance - Page 17. Harmony - Page 16.
Press this footswitch to enable or disable the vocal harmonies.
Press this footswitch to enable or disable any selected effects (reverb, compressor, etc.). Press and hold this footswitch to enable the guitar tuner. Press the Effects/Tuner Footswith again to disable the guitar tuner. See page 19 for more information about the guitar tuner. Note: It is important that your guitar is properly tuned in order to get the best sounding harmonies. Alternate tunings such as DADGAD are fine, as long as the tuning system used specifies a frequency of 440 Hz for A (A440), and it is based on the chromatic scale (12 notes per octave). Micro-tonal scales are not supported.
Mic In Mic/Line Input Level
Guitar In Guitar Thru Guitar Ground Lift
musIQ is a trademark of 3dB Research
Enables 48 volt phantom power on the XLR mic input. Note: Phantom power is normally only needed with condenser microphones and should never be used with ribbon microphones. To avoid damaging the microphone, please consult your microphone documentation to ensure phantom power is applied only when appropriate.
Guitar Ground Lift Guitar In
Eliminates most hum problems. If you hear a humming sound or buzz coming from your amp or P.A., try pressing this button. Connect a guitar directly to this high-impedance input. Note that there is no loss of quality between the Guitar in and Guitar Thru jacks.
Connect a guitar amplifier or powered speaker directly to this output.
Mic/Line Input Level
This knob adjusts the gain of the Mic and Line inputs. Turn clockwise to increase gain, or counter-clockwise to decrease gain. If the Vocal Signal LED is turning red while you sing, you need to decrease the Mic gain.
6. 7. 8.
Connect a dynamic or condenser microphone to this XLR input. This input is the lead voice for the Vocalist Live 2.
Connect a line input source (mixer, mic preamp, etc.) to this input. When connected to a source, this input is the lead voice for the Vocalist Live 2, and disables the Mic In XLR input.
Line Out L/R
Connect these balanced/unbalanced outputs to a mixer, powered speakers or P.A. system if a stereo mix is desired. Only vocal, harmonies, and vocal effects are heard from the Line Outputs. Harmonies sent through these outputs are panned slightly to the left (Line Out L) and right (Line Out R).
Connect this XLR balanced output to a powered speaker or mixer if a mono mix is desired. Only vocal, harmonies, and vocal effects are heard from this output. Connect only the DigiTech PS0913B power supply to this jack.
10. Power Input
Before connecting the Vocalist Live 2, make sure that the power to your amplifier is off and that the Vocalist Live 2 is plugged into the wall and powered on. There is no power switch on the Vocalist Live 2. To turn the Vocalist Live 2 on or off, connect or disconnect the included PS0913B power supply from the Power Input jack.
Connect the Microphone, Guitar, and P.A. or Mixer
1. 2. Plug a microphone into the Vocalist Live 2 Mic In jack. If you need phantom power, press the Phantom Power switch on the Vocalist Live 2 back panel. The Phantom Power LED will illuminate. Note: Phantom power is normally only needed with condenser microphones, and should never be used with ribbon microphones. To avoid damaging the microphone, please consult your microphone documentation to ensure phantom power is applied only when appropriate. 3. 4. 5. 6. 7. Plug your guitar into the Vocalist Live 2 Guitar In jack. Make sure your guitar amplifier is turned off and the volume level is turned all the way down. Connect the Vocalist Live 2 Guitar Thru to your amplifiers input or the P.A. system. Make sure your P.A. or mixer is turned off and the volume levels are turned all the way down. Plug the Vocalist Live 2 Left and Right Line Outputs into your P.A. system or mixer. Or, if you are only using a single channel or mono amplification system, plug only the Vocalist Live 2 Mono output into the P.A. system or mixer.
Set the Vocalist Live 2 Controls
1. 2. 3. 4. 5. 1. Turn the Compressor, Reverb, and Enhance knobs all the way down (counter-clockwise). Turn the Harmony Mix knob to the 11 oclock position. Power up the Vocalist Live 2 by connecting the PS0913B power supply. Press the High button so that it is lit. Press the Harmony Footswitch so that the Harmony LED just above it is lit. Observe the Guitar Signal LED while playing your guitar. Adjust the output level of your guitar until the Guitar Signal LED lights green or amber most of the time. (For more information about setting levels, see page 21.) Perform the obligatory Check 1-2 or sing into the mic while gradually turning up the Vocalist Live 2 Mic/Line Input Level knob until the Vocal Signal LED lights amber most of the time. (For more information about setting levels, see page 21.) Press and hold the Effects Footswitch until the Tuning LEDs light up. Tune each string until the center (green LED below the triangle) LED illuminates for each string, indicating its in tune. Note: It is important that your guitar is properly tuned in order to get the best sounding harmonies. Alternate tunings such as DADGAD are fine, as long as the tuning system used specifies a frequency of 440 Hz for A (A440), and it is based on the chromatic scale (12 notes per octave). Micro-tonal scales are not supported.
Adjust Levels and Tune Your Guitar
4. 5. 6.
Turn on your amplifier and gradually turn it up until you reach a comfortable listening level. Turn on your P.A. system and gradually turn it up until you reach a comfortable listening level. While playing a chord on your guitar, sing a note.You should hear your guitar and your voice, plus a harmony voice. If not, repeat the steps above or consult the Troubleshooting section on page 22. Turn the Vocalist Live 2 Mic/Line Input Level knob completely counter-clockwise. Set the mixer channels faders to 0dB. Set the mixers master fader to its minimum position (no output signal). Set the pan controls on the selected mixer channels hard left and hard right. While singing, gradually turn up the Vocalist Live 2s Mic/Line Input Level knob until the Vocal Signal LED lights amber most of the time, and red during the loudest parts only. (For more information about setting levels, see page 21.) Gradually bring the mixers master fader up until you reach your desired level.
Set up the Mixer for Stereo Operation (If Using Two Channels of a Mixer)
1. 2. 3. 4. 5.
There are several ways to set up the VocalistTM Live 2. Some useful setups are shown here.
Guitar and Microphone In/Guitar Amp and P.A. Out (Mono)
-1 -2 -3 -4 -0 -1 +2 -2 +3 -3 +4 --1 +2 -2 +3 -3 +4 -4 --1 +2 -2 +3 -3 +4 -4 --1 +2 -2 +3 -3 +4 -4 --1 +2 -2 +3 -3 +4 -4 -0 -1 +2 -2 +3 -3 +4 -4 -5
Aux 1 10
Aux 2 10
0 +1 +2
0 -1 -2 +3 -3
0 +1 +2 +3 +4
+4 -4 -5
+10 +-5 -10
-20 -30 -
Mixer/ P.A. system
Guitar and Microphone In/P.A. Out (Mono or Stereo)
0 -1 -2 -3 -4 -5
+10 +5 0
Mono or Stereo
Guitar and Microphone In/P.A. and Powered Monitor Out
Guitar and Mixer or Preamp in/P.A. Out
-1 -2 -3 -4 -5
The Vocalist Live 2 Controls
Harmony Mix Knob
This adjusts the mix of lead vocal (your voice) and the harmony voices. If you turn this knob all the way to the left, youll only hear your voice. If you turn it all the way to the right, youll only hear the harmonies the Vocalist Live 2 produces when you sing. Typically, youll want to set this knob near the 11 oclock position, making the harmonies slightly quieter than your voice. This is usually the best mix for enhancing a song chorus with vocal harmonies. For quieter ghost harmonies, turn the Harmony knob counter-clockwise. For harmonies that are louder than the lead vocal, turn the Harmony knob clockwise.
Harmony Select Buttons
These select the harmony voices that are added to your voice. A harmony can be either higher, on pitch (Unison), or lower than your voice. The six Harmony Select buttons on the front panel are arranged as two vertical columns of three buttons each. The harmony voices you can choose are: Column 1 High = a third above Unison 1 Low = a third below Column 2 Higher = a fifth above Unison 2 Lower = a fifth below
When Unison 1 is on (and Unison 2 is off), it doesnt track notes in a chromatic scale, so it
produces a tight double sound, even if youre singing slightly out of pitch. When Unison 2 is on (and Unison 1 is off), it tracks chromatic notes. This can help you sing on pitch better. When both Unison voices are selected at the same time, neither tracks a chromatic scale, and they are slightly detuned to provide a thicker unison effect. You can select one or two harmony voices at any time. The harmony voices have pitch and time decoupling, as well as a slight gender effect, to distinguish them from the lead vocal. If two Harmony Select buttons are lit and a third one is pressed, the most recently selected one of the current two is kept. No more than two Harmony Select buttons may be lit at any given time. Note: The terms fifth and third are used somewhat loosely. Harmonies produced are usually centered around musical fifths and thirds, but may vary slightly depending on the chords and chord progressions.
The Compressor knob adjusts the amount of compression applied to the incoming vocal. Compression tends to smooth out the vocal performance, and results in a more even tone for the lead vocal. Turning this control all the way to the left defeats the compressor, turning it all the way to the right provides maximum compression. Warning: Because increasing compression amplifies lower signal levels, turning the Compressor knob too high may result in feedback depending on your P.A. volume levels, speaker placement, and other possible factors that are beyond the scope of this manual.
Enhance Knob and Buttons
Enhance effects apply EQ and filtering to the incoming vocal signal, which adds presence and polish to your voice. There are three kinds of Enhance effects:
Resonance - Enhances deeper voices by adding low and mid-frequency filters. Clarity - Enhances all voices by adding mid-frequency filters. Shine - Adds extra sheen to voices by emphasizing high frequencies. Press an Enhance button to select it. Turn the Enhance knob clockwise to increase the amount of filtering applied to your voice, or turn it counter-clockwise to reduce the amount of filtering.
Reverb Knob and Buttons
Using reverb on an incoming voice gives the listener a sense that the material is being performed in an actual room or hall. It is this similarity to actual acoustic spaces that makes reverberation a useful tool in live music. The Vocalist Live 2 features three reverbs to add depth and warmth to your vocal performance. Studio - simulates a studio plate reverb with fairly short decay and lots of diffusion. Room - simulates a mid-sized room with about one second of decay. Hall - simulates a large performance hall with several seconds of decay and high diffusion. Press a Reverb button to select it. Turn the Reverb knob clockwise to increase the amount of reverb, or turn it counter-clockwise to reduce the amount of reverb.
This footswitch turns the Compressor, Reverb, and Enhance effects on or off. While each of these three effects can be turned on or off and adjusted individually, the Effects footswitch activates or deactivates all of them simultaneously. When the LED above the Effects footswitch is illuminated, the effects are on. When the LED is turned off, the effects are turned off.
This footswitch turns the harmonies on or off. While one or two harmonies can be selected with the Harmony Select buttons, the HARMONY footswitch activates or deactivates any selected harmonies simultaneously. When the LED above the HARMONY footswitch is illuminated, the harmonies are on. When the LED is turned off, the harmonies are turned off.
Since the Vocalist Live 2 relies on accurate incoming notes to generate its harmony voicings, it is imperative that your guitar be in tune. The integrated digital tuner of the Vocalist Live 2 makes tuning your guitar fast and easy. To activate the guitar tuner, simply press and hold the Effects footswitch until the Tuner LEDs illuminate. The Effects LED flashes to indicate that the tuner is turned on. To begin tuning, play a note on your guitar. The Display shows the note being played. The Tuner LEDs indicate whether you are sharp or flat. The right five LEDs indicate the note is sharp and should be tuned down. The left five LEDs indicate the note is flat and should be tuned up. The center green LED below the green triangle indicates the note is in tune. The guitar signal output is muted while the tuner is active. Exit the tuner by pressing the Effects footswitch. Tip: The Vocalist Live 2 remembers about 30 seconds of music while you play to determine the proper harmonies. Entering and exiting the tuner clears this memory. This can be useful when youre switching between songs with radically different chord progressions.
Some Usage Notes
The guitar signal is only present in the Guitar Thru jack. It is not present in the Line Out or Mono Out jacks. This enables you to process your guitar using other guitar pedals and effects. Do not hook up any other effects pedals to your guitar prior to plugging it into the Vocalist Live 2, as this could affect vocal harmony generation. The only thing between your guitar and the Vocalist Live 2 should be the guitar cable. Use the Guitar Thru to connect your effects and stomp boxes. Both the Mono Out and stereo L/R Line Outs can be used simultaneously, allowing you to monitor vocals locally using the Mono Out while sending a stereo feed to the main mixer/P.A.
Setting Levels on the Vocalist Live 2
Setting the Vocal Level It is recommended you set your vocal level by adjusting the Mic/Line Input Level knob on the rear panel so that the Vocal Signal LED is amber during loud vocal sections and only briefly turns red on the very loudest vocal sections. The Vocalist Live 2 will normally prevent the vocal harmonies from clipping, even when the LED is red, but for optimum voice quality the LED should turn red only briefly or not at all. Setting the Guitar Level Ideally the Guitar Signal LED should be green or amber while playing. There is no guitar input level control, but most electric guitars send their signal at a level appropriate for the Vocalist Live 2. If you have a volume control on your guitar (for example, an acoustic guitar with a pre-amp built in), you should adjust the volume so that the Guitar Signal LED is green or amber most of the time while playing.
I dont hear any sound coming from the Vocalist Live 2. Make sure the power supply is plugged in to both the Vocalist Live 2 and the power outlet. Make sure the guitar amp, P.A. system, or mixer is plugged in and turned on. Make sure the guitar amp, P.A. system, or mixer volume levels arent turned all the way down. Make sure the guitar volume isnt turned all the way down, and the microphone isnt turned off (if it has an on/off switch). Make sure the Mic/Line Input Level knob isnt turned all the way down. Make sure all the cables are completely plugged into their proper places (see pages 9 through 15 for instructions and diagrams). The harmonies arent tracking properly. Tune the guitar with the Vocalist Live 2 tuner (see page 19). Make sure youre not in Tuner mode while singing. The guitar signal is too quiet. Turn up the volume on your guitar. Make sure the guitar cable is properly connected to the guitar and the Vocalist Live 2. The guitar signal is too loud. Turn down the volume on your guitar. The lead vocal is too quiet. Turn up the Mic/Line Input Level knob. If youre using a P.A. system or mixer, turn up the channel that the Vocalist Live 2 is connected to, or turn up the master level (volume) controls. Try singing closer to the microphone.
The lead vocal is too loud. Turn down the Mic/Line Input Level knob. If youre using a P.A. system or mixer, turn down the channel that the Vocalist Live 2 is connected to, or turn down the master level (volume) controls. I dont hear any harmonies. Make sure the Harmony footswitch is pressed so that the LED just above it is lit. Make sure the Harmony Mix knob is set somewhere between the 11 oclock position and the 5 oclock position. The harmonies are too loud. Turn the Harmony Mix knob counter-clockwise to lower the harmony level and increase the lead vocal level. The harmonies are too quiet. Turn the Harmony Mix knob clockwise to increase the harmony level and decrease the lead vocal level.
A/D/A Converter: Sampling Frequency: Simultaneous Harmonies: Dimensions: Unit Weight: Analog Input Connections Guitar Input: Guitar Input Impedance: Line In: Mic Input Impedance Analog Output Connections Left/Right Outputs: Mono Output: Left/Right Output Impedance: Mono Output Impedance: Maximum Output: Power Requirements US and Canada: Japan: Europe: UK: 24-bit high performance audio 44.1 kHz 2 8.25 Length x 9.375 Width x 2.125 Height 2.3 lbs. 1/4 Unbalanced (TS) 3 Megohms 1/4 Line Unbalanced (TS) 1000 Ohms 1/4 Balanced/Unbalanced XLR 500 Ohms per side 1000 Ohms per side +14dBu Unbalanced, +20dBu Balanced 120 VAC, 60 Hz Adapter: PS0913B-VAC, 50/60 Hz Adapter: PS0913B -VAC, 50 Hz Adapter: PS0913B -VAC, 50 Hz Adapter: PS0913B -240
DigiTech 8760 South Sandy Parkway Sandy, Utah 84070 PH (801) 566-8800 FAX (801) 566-7005 www.digitech.com Made in China Printed 2/2007 DigiTech Vocalist Live 2 Owners Manual 18-0476-A 2006 Harman International Industries, Incorporated, all rights reserved.
DigiTech and Vocalist are trademarks of Harman International Industries, Inc. musIQTM is a trademark of 3dB Research Ltd.
Deepen Your Connection with the Audience with Vocalist Live 3! An innovative tool to add to your vocals for live performance, DigiTech Brings you the Live 3 Harmony and Pitch Correction Pedal. Stomp on a switch and fill the room with natural, full-sounding vocal harmonies that adapt to the notes being played. The Live 3 keeps the lead vocals right on target with pitch correction and more pre-effects like warmth, compression, a noise gate and a 2-band EQ. Add in reverb, delay, and a built-in tuner, and you have an indispensable tool that will have you turning heads and inspiring applause like never before.
TC300 Grader ZKI1105 A-407R Makita 6821 SAT M3 KW-NT1 LE22B350f2W ENT-8000 TL-SF1024 PDX-1 1000 KDC-MP535U Mercedes-benz Vito CQC1425N RX-DP20vbk-rx-dp20 500EK SCX-3205W Rocket Fostex X-15 PV-D209 FS-C5030N Samsung F309 PDP-427XA CDX-CA850X Premia CMT-CP2WA D-E888 FT-60R PT-AE100E Deskjet F300 FAX-LAB 250 W760I SW-45C1S P200D Base-V20 DV-L5 SCX-4521FR II ASC DB458RMC SB-WA50 L14710VIT Plantronics CS70 310000 Pilotime DV2000 DPS-V55M Yamaha M-35 A300D WIM 2210 Review LE37R86BD CPS318 TPH11 BN315 JD-V32CL URC 801 CLP-550N CDX-M850MP Eton S350 TX-21V2 SE232 Fdrv-90E Socket Server IC-W2E LH-T250X Kdc-w237 DRA-397 T3010 Handheld S5200 SC-D103 FE-4020 SR2100 Psm44 ZEN-SP FS728TS KDL32S4000 Hedgehog 6890 N Sdvic Center 420 Clp-154 R1043 NAD T751 939dual-vsta Control AS12fbcn STR-D1015 3 3X B3236 D KDL-32EX710 TN500 Boss Legend HD6103 Cqrx300N Cintiq 17SX DSC-S2100 SMX-C200 VGN-FS285H
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101