Reviews & Opinions
Independent and trusted. Read before buy Doro Dect 4055!

Doro Dect 4055

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Doro Dect 4055, size: 380 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

About Doro Dect 4055
Here you can find all about Doro Dect 4055 like manual and other informations. For example: review.

Doro Dect 4055 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Doro Dect 4055 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Doro Dect 4055 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 4. Page 1 of 1. Average Rating:
Kurbatov57 6:56pm on Friday, July 16th, 2010 
Does what it needs to Got this for my father, who was looking for a phone to replace his mobile. He had initially ordered this one from a catalogue. Doro PhoneEasy This phone is easy to use and has a very clear and detailed user manual.
PvdK 10:00am on Friday, July 16th, 2010 
My brother was bought this for his birthday he suffers from cerebal palsy and impaired vision having seen a number of adverts explaining the phone was... Much simpler to see and use, compared to other small keyboard and tiny letters/digits (e.g., Motorola) and still has all the basic needs (FM.
Dziulis 5:37pm on Thursday, April 8th, 2010 
You can get this cell phone from Consumer Cel...  Large well lit numbers. Easy to read screen Greese can get on the screen from your face.
dannavarapuprasad 6:01pm on Tuesday, March 16th, 2010 
Much simpler to see and use, compared to other small keyboard and tiny letters/digits (e.g., Motorola) and still has all the basic needs (FM.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

DECT 4055
Caller display compatible digital cordless phone
This equipment is not designed for making emergency telephone calls when the power fails. Alternative arrangements should be made for access to the emergency services.

User guide

DORO DECT 4055

CONTENTS

Location of Controls. Handset. Base unit. Unpacking.
Installation. 4 Location the base unit. 4 Getting connected. 4 Handset battery care. 5 Handset battery indicator. 5 On/Off button. 5 Belt clip. 6 Range warning. 6 In-use time. 6 Headset socket. 6 Handset display. 7.. Use. 8 Standby mode. 8 Answering incoming calls. 8 Do not disturb.8 Making an external call. 8 Call timer. 9 Last number redial. 9 Mute. 9 Page/Find handset. 9 Keypad lock. 9 Earpiece volume control. 10 Memory numbers. 10 Additional network service. 10.. Caller display. 11 Viewing caller display numbers 12-13 Deleting a number from the list 14 Deleting all numbers. 14 Direct dialling from the call list 14. Menu settings. 15..
Handsets menu. 16 Handset ringer volume level 16 Handset ringer melody. 16 Display information. 17 Handset keypad sound. 17 Auto answer. 18 Baby call.18-19. Select base unit. 19 Handset PIN code. 20 Register. 20 Reset. 21 Base units setting. 22 Ringer volume level. 22 Ringer melody. 22 Priority ringing. 23 Ring count. 23 PABX usage. 24 Emergency number. 25 Call barring. 25-26 Least cost routing. 27 PIN code. 28 Deregister. 28 Reset. 28
Extending. Additional base units. Additional handsets. Internal call. Transferring calls. Paging all handsets. Miscellaneous. Show IPEI number. Interference. Fault finding. Approved use. Technical data.

32 32-34

LOCATION OF CONTROLS

HANDSET

Headset socket (on the side) Earpiece Display Talk button Scroll button UP Keypad button 0-9, *, # Recall button Redial button Memory button
Charging contacts Microphone On/Off-button Mute/Cancel button Programming button Scroll button DOWN End call button Intercom call button

BASE UNIT

18 Power supply socket 19 Line cord socket 20 Charging contacts
In use indicator Charge indicator Paging button

UNPACKING

In the box you should find the following items: n Handset n Power supply n Base unit n Line cord n 2 NiMh batteries (re-chargeable types) n User guide n Belt clip

INSTALLATION

LOCATING THE BASE UNIT
It is essential to the overall range and performance that the base unit and handset can receive and transmit good radio signals. Place the base unit close to: n a telephone network socket n a 13 Amp mains socket The best location is in an upstairs room and central to the area to be covered. If you experience poor range, try re-siting the base unit. n Do not locate in: direct sunlight, damp or high humidity locations. n Do not locate close to: electrical equipment such as TV's, computers, fridges, etc., or close to radiators, metal pipes or window frames.

GETTING CONNECTED

Remove the battery cover from the bottom of the handset by applying gentle pressure to the bottom of the cover and pushing away from the unit. Insert the battery (supplied), observing correct polarity. Replace the battery cover. Connect the power adaptor plug to the rear of the base unit and to a 13 Amp mains socket. Connect the telephone line to the rear of the base unit and to a telephone network socket
Place the handset onto the base unit (face up or down). Switch mains power on and leave for 8 hours. 3

HANDSET BATTERY CARE

After initial charging the power adaptor must remain connected to the mains & base unit and mains power switched on. It is recommended that the handset is left on charge overnight to ensure maximum in-use time. The batteries should hold their charge for 110 hours, depending on use. If the phone is not to be used for a substantial period of time, i.e. holidays, disconnect the mains power adaptor, when power is reconnected it will be necessary to recharge the handset for 8 hours. The batteries will need replacing if there are signs of leakage, the batteries will not hold a charge for more than two hours.
The rechargeable batteries (NiMH) are cadmium-free and should be disposed of in a responsible and environmentally friendly manner.
IMPORTANT! From new, the batteries (supplied) must be charged for 8 hours without interruption. You can obtain your replacement batteries from: Consumer support department, Doro Audioline Ltd, 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE. Price available on request: Telephone The guarantee will be invalid if any problems arise as a result of the use of an incorrectly specified battery.

HANDSET BATTERY INDICATOR
When the battery is empty, calls cannot be made or received. When the battery is nearly empty the indicator will begin to flash and a warning tone will be heard.
Fully charged High charge Half charge Low battery Empty battery. A warning beep will be heard. 4

ON/OFF BUTTON

The On/Off button is used to switch the handset on or off. When the handset is switched off, battery power is conserved and calls cannot be made or received. To switch off, press & hold the To switch on, press & hold the button until the handset beeps, then release. button until the handset beeps, then release.

BELT CLIP

A belt clip is provided with the product. This item can be connected easily to the rear of the handset by fitting it to the small rectangular holes on the sides. RANGE WARNING If you are on a call and accidentally walk out of range of the base unit, the sound quality in the earpiece will de-grade and warning beeps will be heard.

IN-USE TIME

When the battery is fully charged will the in-use time be 11 hour standby or 13 hours talk time. The times are approximately and it assume normally temperature, the battery is correct and fully charged

HEADSET SOCKET

A headset can be attached to the headset socket on the left hand side. When a headset is connected, sound will not be audible through the handset microphone. Compatible headsets can be ordered via the Consumer Support department on 01527 583800.

HANDSET DISPLAY

Numeric/alpha display
Battery status Range Programming External call
Barred Mute New number Internal call
Indicator Battery status Range
Function - indicates the battery power status. - is on when the handset is switched on and within range. - flashes when the handset is out-of-range of the base unit. - is on when programming. - is on when an external call is in progress. - flashes when an external call is received. - is on when an internal call is in progress. - flashes when an internal call is received. - is on when there is new number in the caller display memory. - is on when the mute function is activated. - is on when calls are barred/baby call is implemented.
Programming External call

Internal call

New number Mute Barrier

USING THE PHONE

STANDBY MODE
When the handset is not in-use (standby mode) the LCD display will show the handset identity number and the battery status.

ANSWERING INCOMING CALLS

When an external call is received, the base unit will ring first and the in-use LED will flash. # To take the call, press and release the button when the handset rings. When a phone call is received the handset symbol will appear on the display. The ringer sound can be changed to personal preferences (see page 16). To finish the call either replace the handset on the base unit or press the button. The handset can also be programmed to connect with a call automatically when lifted off the base unit, if required (see page 18).

DO NOT DISTURB

If you receive an incoming call, but do not want to be disturbed - press and release the button. The handset ringer will be switched off. The ringer will be re-instated automatically when a new call is received. Note: The base ringer will continue to ring.

MAKING AN EXTERNAL CALL

Two methods are available: Method A n Dial the telephone number that you wish to call (the number will be visible on the display). If you dial an incorrect digit, use the C button to erase it.
(the number will be dialled automatically).
To terminate the call, press
Method B n Press the Talk

button.

Dial the phone number (the number will be visible on the display). To terminate the call, press the button.

CALL TIMER

The length of outgoing and incoming calls will be shown on the display approximately 10 seconds after a call is connected.

LAST NUMBER REDIAL

The last four numbers dialled are stored automatically in the memory. One or all of the numbers can be re-dialled as required.

Press the Press the

button until the number you want to call is visible on the display. button (the number will be dialled automatically).
If during a telephone conversation, you which to talk privately to a third party without the caller overhearing, press the button (the mute symbol will appear on the display). To resume the conversation, press the button again.

PAGE/FIND HANDSET

To page or locate a missing handset, press the button on the base unit. The handset will ring for 30 seconds approximately. To terminate this action, press the button or the button on the handset.

KEYPAD LOCK

The keypad can be locked to prevent accidental operation when the handset is being carried. 1. Press- and hold - button # for about 1 second. The display shows:
2. Press and hold down the # button for about 1 second to terminate the keypad lock. If you receive an incoming call in this mode, press the talk button to answer. When the call is terminated, the keypad will revert to the locked position.

EARPIECE VOLUME CONTROL

When on a call, the volume level in the earpiece can be increased or decreased on three levels using the and buttons.

Press and hold the * button until the display shows the number of new calls and the total number of calls, then release.
1 new phone number on the call list
A total of 4 phone numbers on the call list
button to show new, unread number(s). and.
Scroll between the number with button Button Button
scrolls "down" to the oldest number. Scrolls "up" to latest number. button.
To terminate the review procedure, press the
The display will also provide the following information:
The list has been reviewed to the oldest number.
The list has been reviewed to the latest number.
Call information is not available. It could be an international call.
The caller has withheld their number or the number cannot be transmitted.
There is a message waiting. this information is available only with compatible telephone network service.
DELETING A NUMBER FROM THE LIST n Ensure the number you want to erase is on the display.
Press the C.button twice. The display will show "ErASE" and the phone number will be erased.
DELETING ALL NUMBERS FROM THE LIST n Ensure a call list number is on the display
Press and hold the C button, until the display shows "ErASE ALL" then release. Press the C button again, all phone numbers will be erased.
IF THE LIST IS FULL Up to 39 incoming numbers can be stored in the call list (including "Ou t oF
arEa " and "SecrEt" information). When the list is full, the oldest number will be

deleted automatically.

DIRECT DIALLING FROM THE CALL LIST
It is possible to dial any of the numbers stored in the call list quickly and easily.
Ensure the number you want to dial is present on the display.

MENU SETTINGS

The DECT 4055 has a simple menu system which is controlled by five buttons: The The The and buttons are used to scroll through the menus.
button is used to enter the menu system and confirm a setting. button can be used to revert back to standby mode without saving.
The C button is used to erase.
THE MENU CONSISTS OF TWO MAIN GROUPS: Handset menu Used to set the handset to personal preferences. To enter: Press followed by either of the scroll buttons.
Base unit menu Used to set the base unit to personal preferences. To enter: Press followed by #.

HANDSET MENU

To enter the handsets menu, press

and then either

HANDSET RINGER VOLUME LEVEL (BELL LOUD)
You can change the ringer volume level in four levels: off, low, normal and high.

n n n n n

followed by
Scroll to "bELL Lou d". Press
The display shows the current setting (oFF = off, 3 =highest level). Scroll to desired setting with Press to store your setting. and buttons.
In order to hear the correct setting while programming , the key beep must be activated.
HANDSET RINGER MELODY (BELL TYPE)
You can choose from six different melodies for the telephone ringer.
Scroll to "bELL tYPE". Press
The display shows the current setting (1 = Type 1, 2 = Type 2 etc). Scroll to desired setting with Press to store your setting. and buttons.
DISPLAY INFORMATION (BS/HS-DISP)
When the unit is in standby mode it can display the handset (hS-diSP) and base (bSdiSP) identity numbers. This information can be switched on or off.

Base unit number

Handset number
Scroll until the display shows "bS dISP".or "hS dISP". Press The display shows the current setting (on or oFF). Scroll to desired setting with Press to store the setting. or buttons.
HANDSET KEYPAD SOUND (BEEP)
From new, the handset keypad is programmed to emit a confirmation beep every time a key is pressed. This beep can be turned off as desired.
Scroll until the display shows "bEEP". Press
The display shows the current setting (on or oFF). Scroll to desired setting with Press to store the setting. or buttons.
AUTO ANSWER (AUTO ACCEPT)
If the handset is on the base unit, this feature allows the handset to connect with a call automatically when lifted off the base unit, without the need to press the Talk button.
Scroll until the display shows "Au to AccEPt". Press The display shows the current setting (on or oFF). Scroll to desired setting with Press to store the setting. or.
BABY CALL (DIRECT NR/SET)
This feature enables the handset to be pre-programmed with an emergency number which can be dialled automatically by pressing any button (except the programming button). It is possible to answer calls even if this feature is implemented.

STORE THE BABY CALL NUMBER n Press followed by.
Scroll until the display shows "dirEct nr". Press Enter the handsets PIN-code (0000 from new). The baby call number will be shown in the display.
Enter the number (max 20 digits). If you enter an incorrect digit, press the C button to erase it. Press to store the setting.
Baby call is now activated. The display will show the keypad locked symbol.
ACTIVATE/DEACTIVATE BABY CALL n Press followed by.
Scroll until the display shows "dirEct SEt ". Press Enter the handsets PIN-code (0000 from new). The display shows the current setting (on or oFF). Scroll to desired setting with Press to store the setting. or.
SELECT A BASE UNIT (SELECT BS)
If the handset is registered to more than one base unit, you can select one base unit as a special base unit irrespective of how many base units are registered.
Scroll until the display shows "SELEct bS". Press The display shows the current setting. Enter desired setting/base unit using the keypad digits.
Setting "0" means that the handset automatically select a base unit in the range.

to store the setting.

HANDSET PIN-CODE(HS-PIN)
A four digit PIN code is provided to ensure that some of programmable setting can not changed by unauthorised users. From new the code is set to 0000.
Scroll until the display shows "HS-Pin". Press Enter the handsets PIN-code (0000 from new). Enter the new code twice. Press to store the new PIN-code.
REGISTER HANDSET/BASE UNIT (REGISTER)
If an additional handset is added to the system, it must be registered to the base unit. P Press and hold the on the base unit until you hear a series of beeps, then release (approximately 4 seconds). You now have 30 seconds to completed the registration.
Scroll until the display shows "rEgiStEr". Press
Select the base units number by pressing on the keypad 1 - 4. Enter the base units PIN-code (0000 from new). After a few seconds, the display will show all the free handset identity numbers. Use the keypad digits to select the appropriate number. The handset will enter standby mode after a few seconds.

RESET THE HANDSET

The handset can be reset to the factory settings or the redial memory can be erased, if required.

RESET THE LAST NUMBER REDIAL (ERASE REDIAL) n Press followed by.
Scroll until the display shows "EraSE rEdiAL". Press Enter the handsets PIN-code (0000 from new). Press to confirm.
RESET ALL SETTINGS (DEFAULT SET) If this operation is performed all factory settings will be restored:

! ! ! !

Handsets PIN-code restored to 0000 Ring signal level restored to high Ring signal type restored to type 2 Auto answer off Press followed by.
! Keypad beep on ! Volume restored to step 1 ! The display shows only the handsets number
Scroll until the display shows "dEFa u Lt SEt". Press Enter the handsets PIN-code (0000 from new). Press.

BASE UNIT MENU

To enter the base units settings, proceed as followed:

followed by #.

Scroll to the desired setting with the scroll buttons and follow the instructions for respective setting. For some of the settings you must enter a PIN-code (0000 from new)
BASE UNIT RINGER VOLUME (BELL LOUD)
There are four setting available (off, low, normal and high) for the base unit ringer.
Scroll until the display shows "bELL Lou d". Press
The display shows the current setting (oFF = off, 3 = highest level). Scroll to desired setting with Press to store the setting. or.
BASE UNIT RINGER MELODY (BELL TYPE)
There are six choice for the setting of the base unit melody.
Scroll until the display shows "bELL tYPE". Press
The display shows the current setting (1 = Type 1, 2 = Type 2 etc). Scroll to the desired setting with Press to store the setting. or.
PRIORITY RINGING (PRIORITY HS)
If an additional handset(s) is added to one base unit, can you select the ring priority of incoming calls. From new, all handsets will ring.
Scroll until the display shows "PrioritY hS". Press The display shows the priority handsets number.
Enter desired handset identity number by pressing on the keypad digit, If you choose 0 all handsets will ring.

RING COUNT (RING COUNT)

When a handset has been prioritised, it is possible to select how many times it will ring before the other handsets ring.
Scroll until the display shows "ring cou nt". Press The display shows the current setting (1-9). Enter the desired setting with the scroll buttons. Press to store the setting.

PABX USAGE

If you are connected to a PABX, the DORO DECT 4055 can be programmed to accept an access code and to insert a timed pause before the number is dialled. Up to 3 different primary access codes (4 digits each maximum) can be stored. If you are connected to two PABXs and it takes one more access code and two pauses to obtain an external line, a secondary access code can be also programmed. STORE ACCESS CODE (ACCESS CODE) The primary access code is identified as P-CODE0, P-CODE1, P-CODE2.The secondary access code is identified as S-CODE0, S-CODE1, S-CODE2.

n n n n n n

Scroll until the display shows "AccESS codES". Press The display will show on of the six setting. Scroll to desired setting with or.
Enter the access code. You can also use R, * and #. Press to store the setting.
If you enter an incorrect digit, use the C button to erase it. PAUSE LENGTH (DIAL PAUSE) This feature allows you to select the time of a pause often used in dialling sequences on a PABX. From new, the setting is 3 seconds.
Scroll until the display shows "diAL PAu SE". Press The display shows the topically setting. Scroll to desired setting with Press to store the setting. or.
EMERGENCY NUMBER (SOS SET)
Three emergency numbers can be programmed. This function is for making a call even if the call barring function is implemented. 999 and 112 are programmed from new.
Scroll until the display shows "SoS SEt". Press Enter the base units PIN-code (0000 from new).
The display shows one of the programmed emergency number. Scroll to desired position(0-2) using the scroll buttons. Enter the phone number with the keypad digits (max 12 digit). If you enter an incorrect digit, press the C button to erase. Press to store the setting.

CALL BARRING (CALL BLOC)

Call barring can be employed to restrict use of the handset and stop users making expensive calls to international numbers or to premium rate numbers. The base unit can bar up to 3 numbers (of 8 digits each) on each handset. When call barring is enabled the keypad locked symbol will appear on the display. Setting No barring Block according to call barring Block all outgoing calls Display message
bLoc oFF bLoc nr bLoc ou tGoinG

n n n n n n n

Scroll until the display shows "cALL bLoc". Press Enter the base units PIN-code (0000 from new). Enter the identity number of the appropriate handset. The display shows the current setting. Scroll to desired setting with the scroll buttons. Press to store the setting.
SET BLOCK NUMBER (SET BLOC NO) The base unit can bar up to 3 numbers of the 8 digits restrict outgoing calls.
Scroll until the display shows "SEt bLoc no ". Press Enter the base units PIN-code (0000 from new). The display shows one of the barred numbers. Scroll to desired position (0-2) with the scroll buttons.

Enter the number that you which to bar (max 8 digits). If you enter an incorrect digit, press the C button to erase. Press to store the setting.
LEAST COST ROUTING (LCR SET)
Nowadays, a growing number of telephone operators offer discounted charges on certain types of telephone calls. To take advantage of the cheaper charges you must be registered with an alternative operator and often use a special access code before you dial a telephone number. The DECT 4055 can be programmed to recognise a certain dialling code or type of call and automatically dial an access code. Up to two access codes can be stored under either position L-codeor L-code1.
PROGRAMMING LEAST COST ROUTING
Scroll until the display shows "Lcr SEt". Press Enter the base units PIN-code (0000 from new).
The display shows one of the number. Scroll to desired position (00-1) with the scroll buttons. Enter the number that you which to recognise (max 5 digits). If you enter an incorrect digit, press the C button. Press.
Enter the digits the LCR number (max 10 digits). Press Select On or Off with the scroll buttons. Press Store next position or press.
to return to standby mode.
BASE UNIT PIN-CODE (BS-PIN)
From new the base unit PIN-code is 0000. It is recommended that this is changed to a number of your choice.
Scroll until the display shows "bS-Pin". Press Enter the base units PIN-code (0000 form new). Enter the new PIN-code twice. Press to store the new PIN-code.

DEREGISTER (DE-REG)

A handset can be deregistered from a base unit as follows: Note: It is recommended that you do not deregister the master handset (handset no.1).
Scroll until the display shows "dE-rEg". Press Enter the base units PIN-code (0000 form new).
Press the corresponding keypad digit of the handset you which to deregister. Press to confirm the deregister.
If there is a another registered base unit within range, it will be connected to the handset and the new handset identity number will appear on the display.
RESET THE BASE UNIT (DEFAULT SET)
The base unit can be reset if required. If this operation is performed all factory settings will be restored.
Scroll until the display shows "dEFa u Lt SEt". Press Enter the base units PIN-code (0000 from new). Press to confirm.

EXTENDING

The DECT 4055 can form the basis of a multi-handset DECT telephone system which will allow you to: Register up to 6 handset to the same base unit. n Register up to 4 handset to same handset. n Make an internal call and transfer calls from one handset to another handset which is connected to same base unit. n Increase the range of handset by automatic connection to the nearest base unit. n Register other GAP (Generic Access Profile) compatible handset to the base unit.

ADDITIONAL BASE UNITS By connecting several base units to one system, the range of each handset can be extended, but it is critical that all base units are within range of each other. Otherwise it may be that dead spots occur where reception is not possible. It is recommended that when a new base unit is located, a handset is used to make a call and test the range. It is also possible to locate one base unit at home and one base unit at work, and use one handset at both locations.
The picture on your right illustrates a system with four base units, A-D. The dotted lines shows the range of each base unit.
ADDITIONAL HANDSETS Adding additional handset to the system allows all users to make full use of the call transfer and intercom facilities. A maximum of one external call and one internal call can proceed at the same time. If an additional handset is added to the system, the batteries must be charged for 8 hours without interruption. The registration procedure (see page 20) must be performed prior to use. The registration gives each handset a specific identity number, 1 to 6. This number is used for internal calls only. From new, the handset is already registered to the base unit and has been allocated number 1.

INTERCOM CALL

When two or more handsets are registered to the same base unit it is possible to call handset to handset. This call is not charged for by your Network operator.
TO MAKE A INTERCOM CALL n Press the INT button.
Enter the handset number of the handset you wish to call 1 - 6. Press the button on the called handset to take the call. button.
To terminate the call, press the
"INT" will appear on the display of the called handset. The ringer sound is also different from an external call. If a external call is received while a internal call is in progress, a reminder tone will be heard and the in-use indicator on the base unit will flash. To answer the incoming call, either: a) Press the R. The internal call will be terminated. or b) Press the INT button to place the internal call on hold and answer the incoming call. You can switch between an external call and an internal call by pressing the INT button. TRANSFERRING CALLS A external call can be transferred from one handset to another (both handset must be registered to the same base unit). n When an external call is connected, press the INT button.
Enter the handset identity number of the handset to which the call is to be transferred. The called handset user presses the talk button to take the call.
The calling handset user presses the button to transfer the call. If the call is not answered, press the R button on the calling handset to retrieve the call.

PAGING ALL HANDSETS

To call all handsets in a system, press INT button and then the * button. All handsets will ring until the call is answered. 30

MISCELLANEOUS

SHOW IPEI-NUMBER (SHOW IPEI)
The handset have a unique identity number.
P Press and hold down the R button until the IPEI number will be displayed.
button to return to the standby mode.

INTERFERENCE

All cordless telephones are radio transmitters and receivers and such are subject to interference from a wide range of sources. Re-siting the base unit can improve reception substantially. An upstairs room is usually the best location. Electronic equipment like TV's, computers, etc. emit strong electronic magnetic fields which can affect the radio signals. Try not to locate your DECT 4055 next to this type of equipment and ensure that the power line cords are separated from other electrical units.

FAULT FINDING

THE IN-USE LINE INDICATOR ON THE BASE UNIT IS FLASHING n There is new phone number in the caller display memory. AN INCOMING NUMBERS IS NOT VISIBLE ON THE DISPLAY n Have you subscribed to the caller display service? P If "Out of area" or "Withheld Secret" are displayed, it either means that no information of the number is available or that the caller has withheld their number. n Is the phone connected to a PABX? Caller display is not available when connected to a PABX. THE TELEPHONE DOES NOT WORK n Is the power adaptor connected correctly? n Is the line cord connected correctly? n Are the batteries in the handset charged? n Connect a different telephone to the same wall socket. If the other telephone does not work, contact your Network operator. 31
NO DIALLING TONE n Have the batteries been charged? n Is the base connected to a mains power socket and mains power switched on? n Is the telephone line cord plugged into a telephone Network wall socket? WHEN ON CALL, A WARNING TONE IS HEARD n The batteries' power may be low (recharge the handset) n The handset may be out of range - move closer to the base unit. THE BASE UNIT DOES NOT RING P Check that the ringer is programmed on. P Does the total of REN numbers exceed 4? If it does, disconnect other equipment until 4 is achieved. P Is it connected to a mains power socket and mains power switched on? THE DISPLAY ON THE HANDSET IS BLANK P Is the handset switched off? P Is mains power switched on? THE BASE UNIT RINGS BEFORE THE HANDSET P This is normal for all cordless telephones. THE HANDSET DOES NOT RING P Is the ringer programmed Off? MEMORY DIALLING DOES NOT WORK P Store a new number and try again. Technical Support: If you cannot resolve the fault using the fault finder section, please call the Technical Helpline on: between 9AM - 5PM Monday-Friday. Please note that this is a Premium Line number and all calls are charged at 50 pence per minute. Price correct at the time of going to press. Alternatively, you can write to: Technical Support Group, Doro-Audioline Ltd., 22 Walkers Road, North Moons Moat, Redditch, Worcestershire, B98 9HE.

APPROVED USE The DECT 4055 is approved for connection to: (a) Public Switched Telephone Networks (PSTN) (b) Extensions via sockets provided for a direct exchange line (c) PABX providing secondary proceed indication. For use with the following facilities: -cordless telephone -caller display -register recall (TBR) -automatic storage of last 10 numbers dialled -MF signalling -microphone mute -memory redial of up to 4 numbers -intercom call This apparatus should not be used as an extension to a payphone. This apparatus should not be connected to a shared service (party line) Any other usage will invalidate the approval of the apparatus if as a result it ceases to conform to the standards against which the approval was granted. In the event of a mains power failure it will not be possible to dial 999 or 112 emergency services numbers. The power supply output and the handset charger contacts are SELV circuits as defined in EN 41003. The equipment has been approved in accordance with Council Decision 98/482/EC for pan-European single terminal connection to the Public Switched Telephone Network (PSTN). However, due to differences between the individual PSTN provided in the s different countries, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance. Compatible countries: UK, Sweden, Switzerland, Norway, Denmark, Finland. The REN number of the DECT 4055 is 1.The REN number (Ringer Equivalence Number) determines how many telephones can be connected to your telephone line. Most normal exchange lines have a REN capacity of 4. If you exceed the REN value one telephone may not ring. If the equipment is BT supplied then, unless otherwise stated, the REN should be assumed to be 1.

TECHNICAL DATA

Standby Talk time Range Indirect memory Caller display memory Battery Weight : : : : : : : : : : About 110 hours About 13 hours >300 metres in ideal conditions. 10 numbers 39 numbers 2 x 1.2V AA NiMH type Handset: 170 gm Base unit: 200 gm Handset: 45 x 155 x 26 mm Base unit: 107 x 148 x 51 mm

Size (B x H x D)

Specifications may be changed without notice

 

Tags

Officejet 590 Sjmr220 HI-605 ME LC5-D20BB SLV-R100 MX-M1100 TD6120 Atlinks 2410 R-310AW Gpsmap 60C Digimatrix N1240U Rino 130 PCG-R600hmpd P2450H BJC-1000 R08 AF Boombox HS-60 CT-939MK2 5464V VR257 P-3030 VGN-FS415E Quick-O RA-840BX2 Moves 2004 WD-1041WFH Cd Mp3 SH18ZA9 PT7031 380EX Ecler NUO4 Smcwps-G Fujifilm Z30 Pagepro 1200 ME-20 FA4022 Sesame Timex W-62 DW9-CBE7 DXZ835MP Portable DSL-500G 160 C Seiko ST01 DZ-MV780E Macro-adapter-M Ar-m205 WT 1030 I2-I3 WHR-G54S IC-281H Fishfinder 90 PSR-185-PSR-77 MR814V3 V223W DAV-IS50 RQ-SX41 KX-TG5566M KEH-P9200RDS CQ-VA7300N HTS5110 Evolution 1100 SCH-8500 Trifinder Kenox D503 Pearl 9100 DVD-5000B Moose Z900 CT810 V-LUX 20 4000AF CP3505 PCL LC-XNB3 DE6850 FS1255S Scph-30004R Review DX3850 RSH1ftbp SA-N11 RAM 784 ZWW12570W XL-280 DVD-A1XVA 250 SX-F NWZ-E436FK Kd-avx11 Toshiba M5 TH-37PV70P IC-DP200 DB 510 280-P Laserjet 3500 SAL-500F80 ZWC10510W MD230X6 Befdsr41W Uniden BCT8 CP-X260

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101