Dream Multimedia DM500S
Here you can find all about Dream Multimedia DM500S like manual and other informations. For example: review.
Dream Multimedia DM500S manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Dream Multimedia DM500S please write about it to help other people. [ Report abuse or wrong photo | Share your Dream Multimedia DM500S photo ]
Dream Multimedia DM500S, size: 2.8 MB
Dream Multimedia DM500S
First Look: DM500s Gemini 4.70 GSF Mod
User reviews and opinions
|wildthing423||10:34am on Tuesday, August 24th, 2010|
|Dreambox 500s (used) not working! Dreambox 500s will not program and even with extra info will not work.The box may be a clone? Happy customer Yes, I was very happy with the courteous and speedy service from this company - I would certainly buy from here again. Thank you!|
|joesny||1:35pm on Tuesday, May 11th, 2010|
|The Dreambox is the best FTA Box ever made The Dreambox is the best FTA Box ever made. The Dreambox runs using Linux.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Dreambox DM 500-S/C/T
Digitaler Satellitenempfnger zum Empfang von freien und verschlsselten DVB-Programmen. Kommunikations-Schnittstelle Smartcard Leser Linux OS
Digital satellite receiver for free and encrypted Digital Video Broadcasting (DVB). Communication-Port Smartcard Reader Linux OS
Bedienungsanleitung Dreambox DM 7025
User Manual Dreambox DM 500
Table of contents
1. Table of contents.... - 2 2. Views.... - 4 3. Explanation front panel.... - 5 4. Explanation rear panel..... - 5 5. Safety instructions.... - 7 6. Shut down..... - 8 7. Additional safety instructions... - 8 8. Disposal instructions.... - 9 9. Packaging contents.... - 10 10. Installation.... - 10 11. Remote control..... - 11 12. Important notes about operation.... - 12 13. Remote control buttons.... - 13 14. Turning your Dreambox on and off.... - 15 15. Sleeptimer.... - 16 16. Main OSD Menu..... - 16 17. Infobar..... - 18 17.1 Infobar EPG..... - 19 17.2 Infobar Sub Services.... - 21 17.3 Infobar Audio tracks.... - 22 17.4 Infobar Plugins.... - 22 18. Setting OSD language.... - 23 19. Setting the time zone.... - 24 19.1 Manual time correction.... - 26 20. Signal strength (Adjusting your antenna, DM 500-T)... - 27 20.1 Disable 5V (DM 500-T).... - 28 20.2 Automatic transponder scan (DM 500-T).... - 29 20.3 Manual transponder scan (DM 500-T).... - 31 21. Automatic transponder scan (DM 500-C)... - 32 21.1 Manual transponder scan (DM 500-C)... - 34 22. Satfinder (Adjusting your dish, DM 500-S)... - 35 23. Satellite configuration.... - 36 23.1 one single satellite direct connection... - 37 23.satellites via Toneburst.... - 38 23.satellites via 22kHz (Highband only)... - 39 23.satellites via DiSEqC A/B... - 40 23.satellites via DiSEqC OPT A/B... - 41 23.6 Many satellites via DiSEqC Rotor... - 42 24. Motor setup..... - 45 25. Example table for the DiSEqC 1.2 Rotor (SG21000)... - 46 26. Automatic transponder scan (DM 500-S)... - 47 27. Automatic multisat scan (DM 500-S).... - 50 28. Manual transponder scan (DM 500-S)... - 54 29. Edit a transponder (DM 500-S).... - 55 30. Service organizing Adding a new Bouquet... - 58 30.1 Service organizing Adding services to an existing Bouquet... - 60 30.2 Service organizing Editing a Bouquet... - 62 31. Parental lock and Setup lock.... - 64 31.1 Activating the parental lock... - 65 31.2 Deactivating the parental lock.... - 67 31.3 Activating the setup lock... - 68 31.4 Deactivating the setup lock... - 70 32. Locking a service.... - 71 33. Unlocking a service..... - 72 34. Audio/Video settings.... - 73 35. Keyboard.... - 75 -
36. OSD settings..... - 76 36.1 Skin Setup..... - 78 36.2 Available Skins.... - 79 36.3 Setting the teletext (TuxText) position.... - 80 37. Teletext (TuxText).... - 82 38. Expert setup.... - 84 38.1 Communications setup (Setting up LAN, NFS shares)... - 86 38.2 Ngrab Streaming setup.... - 89 38.3 Manual software update... - 90 38.4 Remote control setup.... - 91 38.5 Reset to factory defaults... - 92 39. Timer..... - 93 40. Information Streaminformation... - 94 41. Information About..... - 95 42. Technical data.... - 96 43. Contact & support information.... - 98 44. Warranty card.... - 99 45. Copyright notes.... - 100 46. GNU General Public License.... - 101 -
The Dreambox DM 500 carries the CE-sign and fulfills all requirements form the EU. Version: November 2005. Software: Release 1.09 Subject to change without prior notification.
Standby LED RC LED
Standby On / off
Rear panel DM 500-C/T
Antenna output Serial interface Audio output (digital) Network interface
Antenna input Video output
Audio output (analog)
Power supply connector
Rear panel DM 500-S
LNB output Serial interface Audio output (digital) Network interface
Bedien anleitung D
LNB input Video output Audio output (analog) TV Scart Power supply connector
mbox DM 50
Explanation front panel Smartcard Reader
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into the Smartcard reader. Dreamcrypt is a registered trademark of Dream-Multimedia.
The Standby LED lights up red if the Dreambox is in standby mode. It lights up green if the Dreambox is powered on.
Remote Control (RC) Led
The remote control LED lights up every time the Dreambox receives a signal from the remote control.
The Standby on/off button toggles between standby mode and powered on mode.
Explanation rear panel Antenna input (DM 500-C/T)
Connect your antenna cable here.
Antenna output (DM 500-C/T)
You can optionally connect your TV or VCR here.
LNB input (DM 500-S)
Connect the coaxial cable from your LNB here.
LNB output (DM 500-S)
You can connect an analogue/digital receiver here. Remember to shutdown your Dreambox completely in order for the receiver to work.
Video output (FBAS)
You can optionally connect your Dreambox to a TV using a RCA/Chinch cable. (Composite)
Audio output - analog (Cinch)
Connect your Dreambox with a RCA/Cinch cable to your HiFi-Amplifier (e.g. AUX In or Tape In ports).
Serial interface (RS232C, Sub-D, 9-pin)
The Serial Port is used to update the operating system. Please connect a serial null modem cable here.
Connect your TV or beamer to your Dreambox using a Scart cable.
Audio output - digital (Toslink)
You can connect your Dreambox with an optical (Toslink) cable to your HiFi-Amplifier or DSP. The AC3 signal is also available at this port in case the selected channel transmits Dolby Digital signals.
Plug the power cable of the power supply that came with your Dreambox into power outlet. Connect your power supply to your Dreambox. You must not connect the power plug of the power supply to anything other than a socket that supplies 230V/50Hz.
Network interface (Ethernet 10/100Mbit, RJ45)
The Communication Port is an Ethernet port. It is used to communicate with your Dreambox via HTTP, FTP, NFS, Telnet and Samba. This port is also used to update the operating system of your Dreambox. Please use a regular patch cable to connect your Dreambox to your LAN.
Please read the safety instructions completely and carefully, before using the Dreambox. The Manufacturer takes no responsibility for incorrect handling of the Dreambox. - Allow enough space around the Dreambox for sufficient ventilation. - Do not cover the Dreamboxs ventilation openings with items such as newspapers, tablecloths, curtains etc. - Do not expose the Dreambox to dripping or splashing liquids. - Do not place open flame sources, such as lit candles, on the Dreambox. - Do not place any containers with liquid, such as vases, on the Dreambox. - Do not connect or modify cables while the Dreambox is connected to the power. - Do not remove the cover. Risk of electric shock!
- Do not put any metal things into the slots or ventilation openings. - Please note that the only way to isolate the Dreambox completely from the main power supply is to unplug the main power cable!
WARNING! Modifications and changes to the Dreambox lead to loss of warranty. We recommend the installation of a hard disk by your local dealer. Unskilled installation of a hard disk leads to loss of warranty.
In case your Dreambox is in use for a longer period of time disconnect the power plug from the power outlet. During thunder storm the unit should also be physically disconnected from the power outlet.
Additional safety instructions
(Dis-)Connecting to a LNB: Turn the Dreambox off before you connect or disconnect a cable coming from a LNB. Connecting to a TV: Before connecting or disconnecting your Dreambox to a TV please turn it off. In case you notice any damage to the power cord or power plug immediately disconnect the unit from the power outlet. In case the unit was exposed to humidity immediately disconnect the unit from the power outlet. In case you notice any serious damage to the outer shell of the unit immediately disconnect the unit from the power outlet. Do not expose the Dreambox to direct sunlight, lightning or rain. Grounding: The LNB cable must be grounded. The grounding system must match SABS 061. Cleaning: Disconnect the mains power cord before cleaning the cover. Use a slightly damp cloth without cleaning agents Connect the Dreambox only to suitable sockets. Do not allow overloads to occur.
The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
All Menus and Service lists are closed with the EXITButton.
During Menu and Channellist navigation the following buttons are used to navigate: Channel-up = up Channel-down = down Volume down = left Volume up = right
If you want to enter a Menu press the OK-Button.
Remote Control Buttons MENU-Button
If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu. The OSD main menu has the following options: - (1) TV Mode - (2) Radio Mode - (3) File Mode - (4) Information - (5) Shutdown - (6) Setup - (7) Games - (8) Timer
You can switch to the needed option by pressing the Navigation-Buttons left or right. Also see: Important notes about operation. The numbers in front of each option can be used to directly access the needed function by pressing the according number on the Numeric Keypad of your Remote control. If you are in the service list, pressing the MENU-Button brings up the service menu. The shown options may vary depending on the service list you selected.
The Standby-Button switches your Dreambox on and off. Also see: Turning your Dreambox on / off.
Enter a service number to directly access the option by using the Numeric Keypad. The service numbers are on the left side of the service list. The Numeric Keypad can also be used to enter the page number in teletext mode, if you have pressed the TEXT-Button and activated the teletext decoder. The TV station has to submit teletext information; otherwise this feature cannot be used.
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pressing it again or pressing one of the Volume-up or down-Buttons brings back the audio.
These Buttons enable to jump back or forwards through the Playlist. The Playlist contains the last chosen services, which have been selected. Once having opened the service list, you are able to jump at the Beginning or the End of the Servicelist or to the next Marker.
Teletext / Plugins
Is highlighted yellow as soon as a show is broadcasted encrypted.
Is highlighted yellow as soon as a show is broadcasted in 16:9 aspect ratio. Is highlighted yellow as soon as a show is broadcasted in Dolby Digital.
Infobar - EPG (Electronic Program Guide)
The red dot in the Infobar appears if the selected station transmits EPG information.
If no OSD menu is visible on your screen and you are in TV mode press the TV-Button to access the service list. Press the Info-Button to get to the selection of the EPG style. Or you can press the red Options-Button to directly access the EPG of the station without having to go through the service list.
Select Channel EPG and press the OK-Button to activate it.
Use the Navigation-Buttons to navigate to the desired event and press the OK-Button to view additional information. Pressing the EXIT-Button will quit the EPG. The Options-Buttons are mapped differently in this view, press the Help-Button to see an explanation.
Pressing the green Options-Button will show the Timer Edit menu. Use the Navigation-Buttons to reach the desired option and use the OK-Button to open up the drop down menus. Change the setting to fit your needs.
The drop down menu Switch offers the same options that you can directly access from the EPG using the colored Options-Buttons. Switch will switch to the desired service. NGrab will record via LAN. Press the green Options-Button to save your settings.
After saving you timer event you will be taken back to the EPG. The set timers will be symbolized with a red clock symbol for NGrab Timers and a yellow clock symbol for Switch Timers.
If you selected Multi-EPG when you were asked for the EPG style you will see this view. Use the Navigation-Buttons to navigate to the desired event. The current selection is highlighted gray. Pressing the Info-Button once will show additional information. Pressing the Info-Button again will return you to the Multi-EPG screen. Pressing the OK-Button in Multi-EPG mode will directly switch to the selected service.
Disable 5V (DM 500-T)
Navigate to the option Disable 5V. Press the OK-Button to set a check behind this option if you use a passive antenna. If you connected an active antenna and want to use it without its power supply, press the OK-Button to remove the check behind this option.
Automatic transponder scan (DM 500-T)
Navigate to the option Automatic Transponder Scan and press the OK-Button.
Select the region you live in the drop down menu and press the OK-Button.
You now should see that a valid transponder has been found and the checkboxes in front of LOCK and SYNC should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) only Free: If you check the checkbox in front of the only Free option, your Dreambox will search on for FTA (nonencrypted) services. Press the green Options-Button to start searching. After you started searching you will see the progress bar and the estimated remaining time. Please wait until your Dreambox finished searching for services. You can always abort the searching by pressing the Exit-Button several times.
Once your Dreambox is done searching you will see this menu on the right. A brief summary of the search is shown. Press the OK-Button to close this menu.
Manual Transponder scan (DM 500-T)
Navigate to the option Manual Transponder Scan and press the OK-Button.
Enter the desired frequency with the Numeric Keypad on your remote control. Use the Navigation-Buttons to reach the individual options. Press the green Options-Button to start the scan.
Automatic transponder scan (DM 500-C)
Select your cable provider in the drop down menu and press the OK-Button.
You now should see that a valid transponder has been found and the checkboxes in front of LOCK and SYNC should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) Only free: If you check the checkbox in front of the Only free option, your Dreambox will search on for FTA (nonencrypted) services. Press the green Options-Button to start searching. After you started searching you will see the progress bar and the estimated remaining time. Please wait until your Dreambox finished searching for services. You can always abort the searching by pressing the Exit-Button several times.
Choose the drop down menu Motor Setup and press the OK-Button.
Refer to the Rotors Manual for correct values degrees/second. Visit the Website http://www.heavens-above.com to figure out your geographical location. Enter the values for Longitude and Latitude and press the green Option-Button to save you settings.
Remove the check from the checkbox in front of Use gotoXX function to use a DiSEqC 1.2 Rotor like the SG2100 Rotor without USALS support. As you can see on the left, a new menu with new options will appear.
Take the list of preset satellite positions of your rotor, which can usually be found in the rotors manual and add each satellite that you want to receive in the list in the left. i.e.: Number 1 in the rotor is Hotbird 13 Ost You will have to enter a 1 in the Number in rotor field and a 130 in the Orbital position field.
For a better understanding please take a look at the Example table for the DiSEqC 1.2 Rotor (SG2100). It is borrowed fomr the original manual.
Press the yellow Options-Button to add the satellite to your list.
An example table of 4 satellites is depicted on the left. Attention: You can later on only scan for services on satellites that you have entered in this list. Press the green Options-Button to save your settings. The menu Transponder scan will show up. See sections Automatic transponder scan or Automatic multisat transponder scan for details.
Example table for the DiSEqC 1.2 Rotor (SG2100)
O = East, W = West (this table is not up to date, it is only for explanation)
Automatic transponder scan (DM 500-S)
Navigate to the option Automatic Transponder Scan and press the OK-Button. This option is primarily used for only scanning a single satellite in your list. Please select the option Automatic Multisat Scan if you want to scan for services on all set satellites at once. See section Automatic Multisat Scan for details.
Select one of the two satellites in the drop down menu and press the OK-Button.
You now should see that a valid transponder has been found and the checkboxes in front of LOCK and SYNC should be checked. SNR: Signal to Noise Ratio AGC: Automatic Gain Control BER: Bit Error Rate (should be equals 0 if possible) only Free: If you check the checkbox in front of the only Free option, your Dreambox will search on for FTA (nonencrypted) services.
Follow the instructions in this menu. Press the Navigation-Buttons to reach the desired option and use the OK-Button to change them.
. Network search: The NIT holds the Information about the Satellites and the TV/Radio- Programs. (NIT = Network Information Table) Extended network search: Set a check to scan the NIT from other Transponders. Use BAT: Bouquet Tables of the Provider will be used, if available. (BAT = Bouquet Association Table) Press the green Options-Button to save your settings. You are taken back to the Transponder menu.
Navigate to the option add and press the OKButton.
Through this menu you can a transponder to a satellite. Using the Numeric Keypad of your remote control enter the transponder frequency and symbol rate. Press the green Options-Button to save your settings.
After you have made your changes to the transponder and satellite list, press the Exit-Button to leave the menu. You will be prompted if you want to save your changes. Press the green Options-Button to save your changes. Press the red Options-Button to discard your changes. You are taken back to the Transponder scan menu. Start the transponder scan to find services on newly added satellites or transponders.
Service organizing Adding a new Bouquet
Navigate to the option Service Organizing and press the OK-Button.
Navigate to the option Create new bouquet and press the OK-Button.
You are asked for the type of Bouquet you want to add. In our example we add a TV Bouquet. Press the OK-Button.
Using the Numeric Keypad on your remote control and pressing the numbers several times will let you choose the desired letters and numbers. Pressing the yellow Options-Button will toggle between capital and small letters. Pressing the blue Options-Button toggles between numeric and regular mode. Pressing the green Options-Button adds a space. Pressing the red Options-Button will act as a backspace. Pressing the OK-Button will take you back to the Service organizing screen.
Service organizing Adding services to an existing Bouquet
Please read the section Service organizing Adding a new Bouquet to learn how to get into this menu.
Navigate to the option Add services to bouquet and press the OK-Button.
You are asked in which Bouquet to place the service. We will use our freshly created my new bouquet in this example. Press the OK-Button.
You can now choose whether to take a service from the providerlist or servicelist or the new services list.
Note: All services that were not found in your services list when you did an automatic transponder scan will be saved in the new services list. We will use the providerlist in our example. Press the OK-Button.
The providerlist will show up. In our example we will choose the provider ARD. Press the OK-Button.
You now see the services that are provided by ARD. In our example we mark the service Phoenix by pressing the OK-Button. You can choose more than one service by selecting them and pressing the OK-Button. They will be highlighted in red text if selected. Pressing the Exit-Button will quit your selection. You are taken back to the Service organizing menu.
Service organizing Editing a Bouquet
Navigate to the option Edit bouquets and press the OK-Button.
In our example we will edit a TV Bouquet. Press the OK-Button to edit the TV Bouquets.
In our example we will edit our freshly created my own bouquet Bouquet. Select it and press the OK-Button.
Pressing the red Options-Button will delete the service from the Bouquet. Attention: This will happen without question if you really want to do it! Pressing the green Options-Button will pick up the selected service and enable you to move its position in the Bouquet. Pressing the green Options-Button again will release the service. Pressing the yellow Options-Buttons will let you rename the selected service. See section Service organizing Adding a new Bouquet for details. Pressing the blue Options-Button will add a marker than you can name whatever you want it to be named. See section Service organizing Adding a new Bouquet for details. This allows you to divide your Bouquet list into several sections. The above describes procedures also apply for Radio and File Bouquets.
Parental lock and Setup lock
Navigate to the option Parental lock and press the OK-Button.
You can activate the parental and setup lock in this menu. It prevents anyone else from having unauthorized access to certain services, videos and MP3s. It also offers the possibility to only make certain services available to your kids. These protection mechanisms are controlled by a four digit PIN that only is know to you. Attention: If you loose your PIN you will have to reset your Dreambox to the factory defaults in order to deactivate any locks.
Press the OK-Button to open the service list. Navigate to the service you want to unlock and press the Menu-Button. You can unlock any entry of your choice in the service list. (All services, Satellites, Providers and Bouquets)
Navigate to the option Unlock and press the OKButton to unlock a service. You will prompted for your PIN.
Once you have unlocked a service you will he locked symbol next to its name in the service list will disappear.
Navigate to the option System and press the OKButton.
Navigate to the option A/V settings and press the OK-Button.
Use the Navigation-Buttons left and right and the OK-Button to change the values.
Color format: CVBS(FBAS), RGB (Red, Green, Blue separated), SVideo (Color- and Brightness signal separated) and YPbPr (Component signal e.g. for Projectors). Aspect ratio: 4:3 Letterbox (Standard), (16:9 programs will be displayed on 4:3 TVs with black beams at top and bottom) 4:3 Panscan (16:9 programs will be zoomed to full high on 4:3 TVs, parts of the picture on the left and right side will cut off) 16:9 (programs transmitted in 16:9 will be displayed automatically in 16:9, on 4:3 TVs the picture will be reduced in height) Disable WSS on 4:3: Check the checkbox to disable zooming on some 16:9 TVs during 4:3 transmissions. AC3 default output: If a program is transmitted with an AC3 audio track (e.g. Dolby Digital), the Dreambox switches automatically to this audio track. The AC3 signal will only be available at the optical socket. The Dreambox has no built-in Dolby Digital Decoder, AC3 signals are not available on the analog socket, therefor you need an external Dolby Digital Amplifier to adjust the volume. TV System: Choose the standard that your TV supports. PAL; PAL + PAL60; Multinorm and NTSC. Test: Press the blue Options-Button to activate the testscreen mode. Press the number 1-8 on the Numeric Keypad to select a testscreen. Press any other key to quit the testscreen mode. Press the green Options-Button to save your settings. You will be taken back to the System menu.
Navigate to the option Keyboard Setup and press the OK-Button.
Press the OK-Button to open the drop down menu and select your desired keyboard layout. Press the green Options-Button to save your settings.
Navigate to the option OSD settings and press the OK-Button.
Using the Navigation-Buttons left and right you can change the transparency, brightness and contrast settings of the OSD (On Screen Display). Alpha: The Alpha option controls how strong you will see the TV picture through the OSD menu. Brightness: Changes the brightness of the OSD menu. Contrast: Changes the contrast of the OSD menu. Show main menu as list box: Check the checkbox if you want to view the main OSD menu like all other menus, as a list box. Change skin: See section Skin Setup TuxText Position: See section Setting the Teletext position Press the green Options-Button to save your settings. You will be taken back to the System menu.
TuxText configuration menu: If teletext page 100 is shown you can press the MENU-Button to enter the configuration menu of the TuxText. You have the following options: Teletext - Selection: Use the Navigation-Button left or right to choose another teletext provider from the current transponder and press the OK-Button to view. This option is only available if there is more than one station on the current provider that transmit teletext. Aspect ratio: 16:9 im Standard-Modus = ein/aus (16:9 during Standard-Mode = enable/disable) Enabling this shows the TuxText in 16:9 Aspect Ratio. Press the OK-Button to enable or disable this option. The default setting is disabled. 16:9 im TextBild-Modus = ein/aus (16:9 during TextPicture-Mode = enable/disable) Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is activated with the Volumedown-Button. Press the OK-Button to enable or disable this option. The default setting is disabled. Note: On some older 4:3 TVs these Modes may not work. If enabled, it could happen, that your TV switches away from the VCR or A/V socket. The reason is a technical problem. The Switch signal on the Scart connector is at PIN 8 using 12 Volts. Using a 16:9 Aspect Ratio switches the PIN 8 to 6 Volts, which some older 4:3 TVs can not handle. If you are using a 4:3 TV, we suggest not to enable these modes. Brightness: Here you can adjust the brightness of your Teletext. Press the Navigation-Buttons left or right to adjust the brightness. Alpha: Here you can adjust the alpha value of your Teletext. Press the Navigation-Buttons left or right to adjust the alpha value. National codepage: automatische Erkennung = ein/aus (automatic detection = enable/disable) The national codepage detection is used to display the teletextpages with the right letters for your location. Press the OK-Button to enable or disable this option. The default setting is enabled. If disabled, use the Navigation-Buttons left or right, to choose your codepage.
Additional information can be found at www.tuxtxt.net
Navigate to the option Expert Setup and press the OK-Button.
Serviceselector help buttons: Press the OK-Button to turn the colored help buttons off. The default setting is enabled. Show Sat position: Putting a check behind this option by pressing the OK-Button will show the sat position of the current station in the Infobar. Enable Fast zapping: Pressing the OK-Button will remove the check behind this option. Switching stations will be a few nano seconds slower. Skip confirmations: Press the OK-Button to put a check behind this option. No more confirmation windows will be shown. Be careful with this option. The System does not ask anymore, if you would like to see the recorded movie after stopping recording nor if you would like to really delete a movie. The default setting is disabled.
Ethernet: 100 Mbit compatible, bi-directional interface Function Update of Firmware and Preprogramming Input voltage: 12V power converter 110-230V / 50-60Hz AC +/- 15% Physical specification: Ambient Temperature +15C.+35C Humidity < 80% Size (B x T x H): 196 mm x 130 mm x 40 mm Weight: 500g DM 500-C/T specific data: DVB-C/T Tuner: Frequency Range 51. 858 MHz Input Impedance 75 Ohm Symbolrate 1. 6.9 Mbaud/s
DM 500-S specific data: DVB-S-Tuner: Frequency Range 950 - 2150 MHz Signal Level - 65 dBm - 25 dBm Signal-to-Noise Level 12 dB max. DBS-Tuner Input Connector F-Type female Input Impedance 75 Ohm AFC +/- 3 MHz Demodulation Shaped QPSK Symbolrate 2 - 45 Mbaud/s, SCPC / MCPC Inner FEC: Rates:1/2, 2/3, 3/4, 5/6, 7/8 (DVB specification) Demultiplexing according to ISO 13818-1 LNB power supply: LNB Strom 500mA max. ; kurzschlussfest LNB Spannung vertikal < 14V ohne Last, > 11,5V bei 400mA LNB Spannung horizontal < 20V ohne Last, > 17,3V bei 400mA LNB Abschaltung im Standby-Mode Anzahl aktiver Satellitenpositionen: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor-Steuerung
Contact & support information
Headquarter & Distribution: Dream-Multimedia Sales and distribution through Visoduck Discount GmbH Pierbusch 24-Lnen Germany Dealers Hotline: (Dealers only) Tel.: +49 (0)180 - 98 - 000 Fax: +49 (0)180 - 98 - 001
You can reach the dealers hotline from : Mo - Fr. 09:00 am - 12:00 pm and 01:00 pm - 03:00 pm Technical Hotline: Tel.: +49 (0)180 - 99 - 777 Fax: +49 (0)180 - 99 - 778
You can reach the technical hotline from: Mo - Fr. 09:00 am - 12:00 pm and 01:00 pm - 03:00 pm
Dealers & Pricing: E-Mail: email@example.com Technical Support: E-Mail: firstname.lastname@example.org Website: Weblink: http://www.dream-multimedia-tv.de Support Forum: Weblink: http://www.dream-multimedia-tv.de/board Software Support (actual images): Weblink DM500: http://www.dm500.de
Serial. - No.:.... MAC - No.:...
(Serial and MAC-No. is located at the back of your Dreambox)
Customer Address: Name:... Street:... Country:... Postcode:.. City:..
Reseller Address: Name:... Street:... Country:... Postcode:.. City:..
Date of purchase:..
In case the device was exposed to humidity immediately disconnect the device from the power outlet. In case you notice any serious damage to the outer shell of the device immediately disconnect the device from the power outlet. Do not expose the Dreambox to direct sunlight, lightning or rain.
Grounding: The LNB cable must be grounded. The grounding system must meet SABS 061 requirements. Cleaning: Disconnect the mains power cord before cleaning the cover. Use a slightly damp cloth without cleaning gents. a Connect the Dreambox only to suitable sockets. Do not allow overloads to occur. Please be careful that the batteries of your remote control are not exposed to heat, since they might explode.
The packaging of the Dreambox only consists of reusable materials. Please recycle if possible. This symbol on the product or on its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsi- bility to dispose of your waste equipment by handing it over to a designated coll- ection point for the recycling of waste electrical and electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.
For more information about where you can drop off your waste equipment for recycling, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Please note that empty batteries and electric waste is not to be put into the regular garbage.
1.2 Packaging contents
Please check the completeness of the boxs contents. Included in box:
Dreambox DM500 HD
2 Batteries (1,5V Mignon / AA / LR6)
Quickguide HDMI cable
Standby-Button Remote control sensor
Power switch LNB-In TV-Scart out Modem port
Scart TV LNB IN
Modem DC 12V Digital Audio
Digital audio out HDMI out
Network interface Power connector
1.3.1 Explanation Front Panel
Insert your Dreamcrypt Smartcard with the golden chip facing down and forward into one of the two Smartcard reader slots. Dreamcrypt is a registered trademark of Dream-Multimedia.
One red and one green LED show the standby status of your Dreambox.
Remote control sensor
The remote control sensor receives the infrared signals of the Dream Remote Control.
All Menus and Service lists are closed with the EXIT-Button.
In general the menus are controlled using the Navigation-Buttons on your remote control. To get into a submenu you have to press the OK-Button.
Explanation remote control buttons
SHIFT / SETUP-Button
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV. See chapter 15. TV-Mode setup.
The Power-Button switches your Dreambox on and off. See chapter 4.1 Turning your Dreambox on and off.
The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will shortly light up once your press the button.
The TV-Mode-Button switches your remote control into TV control mode to control your preprogrammed TV. It will shortly light up once your press the button. See chapter 15. TV-Mode setup.
Enter a service number to directly access the option by using the Numeric Keypad. The service numbers are on the left side of the service list. The Numeric Keypad can also be used to enter the teletext page number when you are in TV-Control-Mode and if your TV is teletext capable. The TV station has to submit teletext information; otherwise this feature cannot be used.
The Arrow-Left and Arrow-Right-Button enable you to jump back and forth between the last 20 channels you have watched. If you have selected a sub service (see chapter 4.6) you can use these buttons to switch to the next sub service. Additionally these buttons can be used to delete characters during text input.
Pressing the MUTE-Button mutes the Volume. A crossed speaker symbol will appear on the TV screen. Pressing it again or pressing one of the Volume +/- Buttons brings back the audio. The Mute-Button deletes a character during text input.
You can leave all menus and service lists by pressing the EXIT-Button.
3.1 Video output selection
You will be shown different video output modes for roughly 10 seconds, after you have connected and switched on your Dreambox. Once you see a clear picture on your TV screen press the OK-Button to select it. If you prefer a different output than the selected one you can use the Navigations-Buttons up/down and the OK-Button to select it. You can choose from the following video output options: 1. HDMI using a HDMI cable 2. Scart using a Scart cable Select your desired option with the Navigation-Buttons up and down. Press the OK-Button to activate. You are taken to the next step.
You can now select the video mode. The possible options strongly depend on the video output mode you have selected in the step before. To learn more about the options refer to chapter 10.4 A/V Settings. Select your desired option with the Navigation-Buttons up and down. Press the OK-Button to activate. You are taken to the next step.
Finally you can adjust the screen using some test screens. Select your desired option with the Navigation-Buttons up and down. Press the OK-Button to activate. The video output should now be configured.
3.2 Language selection
Select your desired and language with the Navigation-Buttons up and down. Press the OK-Button to activate.
The start wizard takes you through the basic setup of your Dreambox. Press the OK-Button on your remote control to get to the next step.
You will be asked if you want to set the basic settings for your Dreambox now or if you want to quit the start wizard. Using the Navigation-Buttons up and down select your desired option and press the OK-Button to activate your selection. If you choose User wizard to setup basic features you will be taken to the menu for the tuner configuration.
3.3 Tuner setup
Detailed information about the tuner setup can be found in chapter 11.1 DVB-S2 Tuner configuration.
3.4 Default services list/Service scan
Depending on your tuner configuration in the previous step, you might be offered to install default services lists. Otherwise you will be asked to perform a service scan. Detailed information about the service scan can be found in chapter 11.2 Automatic scan.
3.5 Parental Control
Refer to section 6.7 Parental control for further information about this feature.
Entering the pincode
General overview of the following programming.
General overview of the upcoming programming for_the following days. (Depending on the station up_to_one week).
Press the Menu-Button in the Multi-EPG view. A window will appear where you can enter a time and date. After you have entered the desired time and date press the OKButton to activate you selection.
5.3 Graphical Multi-EPG
You have another option to view the EPG of different services and successive shows. The Graphical MultiEPG displays the EPG overview of the upcoming hours (can be set to 1-5 hours with the Buttons 1-5 on the Numeric-Keypad) for the chosen bouquet. Using the Navigation-Buttons up/down/left/right you can browse the shows. More detailed information about the sleected show is displayed in the bottom part of the EPG. You can directly set a timer for the selected show, by just pressing the green Options-Button. To access the Graphical Multi-EPG either press the blue Options-Button or press the Info-Button for about 2 seconds and select Graphical Multi-EPG.
6. Edit the channellist
What is a bouquet? A bouquet can be thought of something like a folder. Every channel equals a page in this folder and the pages are sorted into categories. This way you can create a bouquet called Kids, for example, under which you file all childrens stations. Another example would be to create a bouquet called Sports where you put all sports channels. This way you can create several topic related bouquets.
Note: You can only delete channels in the favorites view!
You cannot delete the channels in the All view. The use of the All view is to keep an internal list of all available stations. If you start a new channel search the result would be saved to the All view for example. You favorites bouquet will stay untouched. This way you can easily add newly found channels from the All list to your favorites bouquet. To see how it is done refer to section 6.2.
6.1 Adding a bouquet
To be able to add a bouquet you have to set the Allow multiple bouquets option to yes. Refer to section 10.2. Pressing the Up/Down-Buttons on your remote control activates
Press the blue Options-Button to switch to the bouquet view.
By pressing the Menu-Button the Channellist menu will open up. Navigate to the option add bouquet.
Use the Numeric-Keypad on your remote control to enter the name for the new bouquet. The according letters are printed on button. The Mute-Button deletes a character. Press the OK-Button to add the new bouquet to your favorites list. You will be taken back to the "Channellist menu".
6.2 Add a service to favorites
If you want to add a service to your Favorites-view you can choose from services in the All-, Satellites- and Provider-views. You can switch views by pressing the red, green, yellow and blue Options-Buttons. At this point we only describe the process from the All-Bouquet since it is the same for the others. Pressing the Up/Down-Buttons on your remote control activates the service list. Press the red Options-Button to change to the Allview. Use the Navigation-Buttons up/down to select the desired service and press the MENU-Button to open the Channellist menu.
Navigate to the option add service to bouquet. If you are using more than one bouquet this option is named add service to bouquet instead and you will get a list of your bouquets afterwards. You can choose to which bouquet you want to add the currently selected service. If you are using only one bouquet which is the factory default, the service will be added to you favorites list.
6.3 Adding multiple services to a bouquet
You can select multiple services from the All-view to be added to the currently selected bouquet. Pressing the Up/Down-Buttons on your remote control activates the service list. Use the Bouquet +/- Buttons to switch to the desired bouquet. As an alternative you can press the blue Options-Button and select the desired bouquet. After that select a service and switch to it by pressing the OKButton.
By pressing the Menu-Button the Channellist menu will open up. Navigate to the option enable bouquet edit. The Allview will open up.
All services that are in the selected bouquet are highlighted red. Use the Up/Down-Buttons to navigate to a desired service and press the OK-Button to select. The service will be highlighted red. Using this method you can select additional services that you want to add to the bouquet. Once you have selected all services that you want to add, press the Menu-Button. The Channellist menu will open up.
Choose the End bouquet edit option. All highlighted services will now be added to the bouquet that you selected in the beginning. If you are only using one bouquet, which is the default setting, the selected services will be added to you favorites list.
6.4 Remove a service from favorites
Pressing the Up/Down-Buttons on your remote control activates the service list. Use the Navigation-Buttons up/down to select the desired service and press the MENU-Button to open the Channellist menu.
Navigate to the option remove service. The selected service will be deleted from your favorites list.
6.5 Moving a service to favorites
Navigate to the option enable move mode and press the OKButton.
Use the Navigation-Buttons up/down to select the service that you want to move and press the OK-Button. The service will be highlighted red.
If the entered pincode was false you will see this notice. Press the OK-Button to get back into the Change service pin menu and to enter the correct new pincode twice. Now select the Edit services list option and press the OK-Button.
Use the Navigation-Buttons up/down to select the first letter of the channel that you want to lock or allow and press the OK-Button. In this example we decided to lock the service called ProSieben. Accordingly we selected the P as the first letter.
The Parental control services Editor will open up. All services beginning with the letter P are shown. Select ProSieben and press the OK-Button.
A symbolized padlock will appear in front of the channel letting you know that it can only be watched when the right pincode is entered. If you have selected whitelist under the Parental control type then this channel will be the only one that can be viewed without entering the right pincode.
Protecting the parental lock setup
Additionally you have the option to protect the parental control menu using a pincode. Setting the Protect setup option to yes you will only be able to change parental control setting after you have entered the correct pincode. Once you entered the wrong pincode three times in a row you have to wait 15 minutes before you can try again.
Note: You can use two different pincodes to protect the setup and the service list.
7. External eSATA Hard Disk
Note: All options described in this chapter are only available if you have connected an external SATA hard disk to the eSATA connector at the rear of your Dreambox DM500 HD.
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option Setup and press the OK-Button to select.
1. Navigate to the option System and press the OK-Button The System menu will open up. 2. Navigate to the option Harddisk and press the OK-Button 3. Navigate to the Harddisk setup option and press the OK-Button
You now can set the duration of time after which the harddisk will be put into standby-mode. You can select from: No standby 10 or 30 seconds 1, 2, 5, 10, 20 or 30 minutes 1, 2 or 4 hours
Once you have selected the desired time press the OK-Button or the green Options-Button to get back into the harddisk menu.
1. Navigate to the option System and press the OK-Button The System menu will open up. 2. Navigate to the option Harddisk and press the OK-Button 3. Navigate to the Harddisk setup option and press the OK-Button
Navigate to the desired HDD option and press the OK-Button. If you have connected hard disk this option willdiffer from the one depicted! By pressing the red Options-Button you will initialize (format) the hard disk. After you confirm the safety question the initialization process starts.
!!! WARNING !!! All data stored on the HDD will be lost.
7.2 Recording 7.2.1 Instant recording
Press the red Options-Button. You have five available options: - Add recording (indefinitely) - Add recording (stop after current event) - Add recording (enter recording duration) - Add recording (enter recording endtime) - Don't record Use the up/down-Buttons to navigate to you desired selection and press the OK-Button to select. A ongoing recording is indicated by a flashing symbol in the Infobar (see chapter 4.10). During a recording you can watch another service, view a previously recorded movie or add an additional recording. The number of simultaneous recordings depends on the number of services residing on a transponder. To see the sevices on the current transponder open the channel list and go to "Sattelites" --> "Current Transponder" It is possible to make up to four simultaneous recordings. Pressing the Up/Down-Buttons on your remote control activates the service list. The recording continues in the background. Once a recording is started, no matter if manually or by timer (see chapter 7.2.3) it will be signaled by a note on the screen.
If the tuner is busy with one or more recordings and you are trying to access a service not on the curent transponder you will get the "No free tuner" message.
7.2.2 Stop recording
Switch to the service which recording you want to stop. Press the red Options-Button, select the "Stop recording" option and press the OK-Button to select. If you only have one active recording it will be stopped immediately. If more than one recording is active you will given the choice which recording you want to stop.
7.2.3 Recording by timer
With the help of a timer you can record shows. You are offered two different ways to program a timer, the manual way of via the EPG. If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option Timer and press the OK-Button to select. You see the Timer Editor menu. Pressing the red Options-Button will delete a timer. The green Options-Button adds a timer, the yellow Options-Button toggles active on and off (only possible in waiting status) and the blue OptionsButton removes finished timers from the list. To edit an existing time select it and press the OK-Button. The status of a timer is shown on the right side: -
Color format: CVBS (FBAS), RGB (Red, Green, Blue separated), SVideo (Color- and Brightness signal separated). WSS on 4:3: Check the checkbox to disable zooming on some 16:9 TVs during 4:3 transmissions.
1. Navigate to the option System and press the OK-Button. The System menu will open up. 2. Navigate to the option Network and press the OK-Button.
Select Integrated Ethernet and press the OK-Button. Select the Adapter settings option and press the OK-Button. Use the Navigation-Buttons and the Numeric-Keypad to change the settings.
This options toggles the integrated ethernet interface on and off.
Use DHCP: If set to yes your Dreambox will get its IP from a DHCP server. If you are using a router to access the internet you usually have a DHCP server. Disable this option to set a static IP address.
Manually setting an IP address These settings are only needed if you have selected no on the Use DHCP option before.
IP Address: You can assign any IP address to you Dreambox. The only expection is the 192.168.0.1 IP since it usually is reserved for you internet router and should therefor not be used.
Free IP addresses:
192.168.0.2 - 192.168.0.254
Netmask Enter the subnet mask which usually is 255.255.255.0
Netmask Enter the subnet mask which usually is 255.255.255.0 Use a gateway: Set this option to yes and enter the IP address of the PC or router in your network with internet connectivity. Ususally this is: 192.168.0.1
To save the settings and activate the network connection press the OK-Button.
Note: If you have set the Use DHCP option to yes you wont have to enter anything here since this will be done automatically.
Nameserver: Enter the DNS-Servers IP address of your LAN here. DNS is used to translate a Domain name to an IP address. Normally, if the Type is set to LAN, there is no need for a DNS entry. If the Dreambox is connected to the Internet over a router, enter the routers IP address here.
Press the green Options-Button if you want to add a seconds nameserver and the yellow Options-Button to delete a namesever. You can enter a maximum of two nameservers.
The network test will assist you in finding possible sources of error in your network configuration. Press the green Options-Button to start the test or to repeat it. Press the yellow Options-Button to abort the test. Once the test has finished you can get additional information and help to every subitem of the test. Use the Navigation-Buttons up/down to select and item and press the OK-Button.
before the test
after a successful test
For Port A and Port B select the desired satellites just as described in the Single satellite direct connection section. Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again. Press the OK-Button to save your settings.
11.1.3 Two satellites via DiSEqC A/B
Use this type of configuration if you want to receive two satellites from one Twin Universal or Quad Universal LNB. It does not matter if you use one or two dishes to achieve this. In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to the satellite receivers (Dreamboxes) in your household. Please read the section 11.1 DVB-S2 configuration to learn how to get into this menu. The Reception settings menu will open up. Use the up/down-Buttons to navigate to the Mode option and use the left/right-Buttons to select DiSEqC A/B.
For Port A and Port B select the desired satellites just as described in the Single satellite direct connection section. Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again. Press the OK-Button to save your settings. If you have trouble with Tune failed messages please set the Send DiSEqC only on sattelite change and Set voltage and 22KHz to yes.
11.1.4 Four satellites via DiSEqC A/B/C/D
Use this type of configuration if you want to receive four satellites from one Single Universal or Twin Universal LNB for four or eight parties. It does not matter if you use one or two dishes to achieve this. In this case the LNBs are connected to a so-called Multiswitch from which the signal is via coax cabled to the satellite receivers (Dreamboxes) in your household. Please read the section 11.1 DVB-S2 configuration to learn how to get into this menu. Four satellites via DiSEqC A/B/C/D (DVB-S) The Reception settings menu will open up. Use the up/down-Buttons to navigate to the Mode option and use the left/rightButtons to select DiSEqC A/B/C/D.
For Ports A, B, C and D select the desired satellites just as described in the Single satellite direct connection section. Make sure you know which satellite is connected to which input on the Toneburst switch. If you do not find any services in the transponder scan later, exchange the two satellites in this list and try again. Press the OK-Button to save your settings.
11.1.5 Stab Positioner using USALS
Use this type of configuration if you want to receive many satellites with a Stab positioner from a Single Universal LNB. The coax cable is directly connected from you Dreambox to the LNB. Please read the section 11.1 DVB-S2 configuration to learn how to get into this menu. The Reception settings menu will open up. Use the up/down-Buttons to navigate to the Mode option and use the left/right-Buttons to select Positioner. This menu is meant for a Stab positioner. You only have to enter the geographical details of your residence. At http://www.heavens-above.com you can find the coordinates of your residence.
11.3 Manual scan
1. Navigate to the option Service searching and press the OK-Button. The Service searching menu will open up. 2. Navigate to the option Manual scan and press the OK-Button.
The Service scan menu will open up. Use the Navigation-Buttons left/right to select the tuner on which you want to run the manual service scan. All other options can be changed by using the Navigation-Buttons left/right and depend on the type of tuner that you want to run the scan on. Press the OK-Button to start the manual scan.
12. Systeminformation 12.1 Service
If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to the option Information and press the OK-Button to select.
1. Navigate to the option Service and press the OK-Button. The Service menu will open up.
This window shows detailed technical information about the current service. Press one of the four Options-Buttons to get the following information: red = Serviceinfo green = PIDs yellow = Transponder blue = Tuner status Press the OK-Button to close this menu.
12.2 About (Hard- and Software)
1. Navigate to the option About and press the OK-Button. The About menu will open up.
This window shows all relevant information about the Hard- and Software of your Dreambox. Press the OK-Button to close this menu.
13. Installing new software
How do I install new software on my Dreambox DM500 HD? Prerequisites: PC with Windows operating system DreamUP software (current version under http://www.dream-multimedia-tv.de) 1 Mini-USB cable 1 network cable (optional) 1. Disconnect you Dreambox from the power. 2. Connect the Mini-USB plug of you Mini-USB to USB cable to the service port of your Dreambox and the USB plug to your PC. 3. The PC will recognize your Dreambox as new hardware and ask for a driver. You will find the driver in the download section on our hompage. (www.dreammultimedia-tv.de) Please install the driver now. 4. Open the Windows device manager. In Windows XP this is done by clicking Start, Settings, System control, System, Hardware, Device manager. 5. Select Ports (COM & LPT) and look for CP210x USB to UART Bridge Controller. Keep the COM Port that is written in brackets behind this entry in mind. In this example it is: (COM4). 6. Start the "DreamUp" software. 7. Set the Port option to the COM-Port you noted in step 5. It is COM4 in our example. 8. Check the box in front of Use network if you have connected your Dreambox and PC using a network cable. The software update can be done without network support, but it takes at least 30 minutes. 9. Enter your PCs IP under Local-IP (PC) your Dreamboxs IP under Foreign-IP (Box). 10. Click on the Connect button and reconnect your Dreambox to main power.
DVB/S2-Tuner: Frequency range 950. 2150 MHz Demodulation DVB-S (QPSK); DVB-S2 (8PSK,QPSK) Symbolrate DVB-S: 2. 45 Mbaud/s, SCPC/ MCPC DVB-S2: Mbaud/s (8PSK) , Mbaud/s (QPSK)
Video decoder: Video Compression MPEG-2 and MPEG-1 compliant, H.264 Picture format 4:3, 16:9 Letterbox for 4:3 TV sets Audio decoder: Audio compression MPEG-1 & MPEG-2 Layer I and II Audio Mode Dual (main/sub), Stereo Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz Analog out: Outputlevel L/R 0,5 Vss at 600 Ohm THD > 60 dB (1kHz) Cross-talk < -65 dB
Digital out: Outputlevel 0,5 Vss at 75 Ohm Frequency 32 kHz, 44.1 kHz, 48kHz S/P-DIF-output optical Video out: Outputlevel FBAS 1 Vss +/- 0.3 dB at 75 Ohm Video parameters: Inputlevel FBAS 1 Vss +/- 0.3 dB at 75 Ohm Teletext according to ETS standards TV-Scart: Output: FBAS, RGB, S-Video over OSD selectable Mini-USB service port: Function: Software update Ethernet: 10/100 Mbit compliant network port Function: Software update Analog modem: Analog modem for internet access SATA Connectors: External eSATA connector LNB power and polarization per tuner: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite positions: DiSEqCTM 1.0/1.1/1.2 and USALS Input voltage: External power supply: Input: 110-240V AC / 50-60Hz / 0,6A Output: 12V = / 3A Power consumption: < 12W at 12V < 1W Standby General: Ambient Temperature +15C.+35C Humidity < 80% Dimensions (W x D x H): 195 mm x 130 mm x 40 mm Weight: 0.7 kg
17. Contact & support information
Headquarter & Distribution: Dream-Multimedia GmbH Pierbusch 24-Lnen Deutschland Dealers Hotline: (Dealers only) Tel.: +49 (0)180 - 992 Fax: +49 (0)180 - 993 0,09 /min from german landline, mobile prices may vary You can reach the dealers hotline from : Mo - Fr. 09:00 am - 15:00 pm Enduser Hotline: Tel.: +49 (0)180 - 990 Fax: +49 (0)180 - 991 0,09 /min from german landline, mobile prices may vary You can reach the enduser hotline from: Mo - Fr. 09:00 am - 15:00 pm Sales: Tel.: +49 (0)180 - 994 Fax: +49 (0)180 - 995 0,09 /min from german landline, mobile prices may vary You can reach the sales hotline from: Mo - Fr. 09:00 am - 15:00 pm Dealers & Pricing: E-Mail: email@example.com Technical Support: E-Mail: firstname.lastname@example.org Website: Weblink: http://www.dream-multimedia-tv.de Support Forum: Weblink: http://www.dream-multimedia-tv.de/board Software Support (available software updates): Weblink DM500 HD: http://www.dm500hd.de
18. Copyright notes
Dream-Multimedia 2010. All rights reserved. This document is copyrighted with all rights reserved. Under copyright laws the documentation may not be copied, photocopied, reproduced, translated, or reduced to electronic medium or machine readable form, in whole or in part without prior written consent of Dream-Multimedia GmbH. Failure to comply with this condition may result in prosecution. If this document is provided by Dream-Multimedia, Dream-Multimedia permits the printing and copying of this document and parts of it for private use but not for the purpose of redistribution in any way. DreamMultimedia is not liable for damages caused by documents changed without written consent of Dream-Multimedia. This product contains files that are distributed under different licenses, especially a Open Source License, the GNU General Public License. You can find details about this License on the next three pages. Additional notes about the source code and patches under The GPL license can be found on the internet under this link: http://www.dream-multimedia-tv.de/deutsch/downloads.php
the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for non commercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS
Kawai CA5 Sunbeam 5895 1198 S XT45079 WA-90 Coupe TX-32PM1 IC-FR3100 Omen 2 Xv-n652 VT580 E1311 Vivicam 50 Review MIL DOT Kindle SX-KN2400 DVP620VR-17B Garmin 205W DMC-FX10 DX 450 DSC-W300 SMX-C10LP VGN-N31s-W 42LC2DB 250 WX FL1001 Maison D-395 Dvdr70-051 Nissan GT-R QG3020 Optio T20 HTS3400-37B WD-85290NP VP-700 CDE-9846R 20212 Fb775BE-ultra Power864 KDL-26EX302 Designjet 330 E1280 DVR-330-S HT-CN300H 5086MS Mini 4 Harmonyman DMR-EZ47V 26LD6600 Notebook WD-1248RD Warrior BX 280 3043 YE UT10580 PM-48 S RX-D201sj-rx-d201 DH9300 CL28W35TAN Strategy CQ-C1121U 32PF5331 12 SRM7500 10 Joyride 150 WLI-PCM-l11GP DXG-568 WD-10480 EL-27 22HFL3330D E360D Mouse HE161HJ DVD-3800BD GA-K8NE ASI64010K CCD-TR401E ED-X3450 EH2511 Muvo2 FM Camera HDC-HS250 Controller XM-2002GTR P2410 Powercam 933HD Plus CUV4XME Dock 3 Mark III Tornado TC-26LX70 I475D Griso 850 PS42A410c1 RS261mdpn SH-B083L DVD-CM350 Catalogue 2007 SMC7908vowbra SX303 Isdn
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101