Reviews & Opinions
Independent and trusted. Read before buy Dream Multimedia Dreambox 7000-S!

Dream Multimedia Dreambox 7000-S Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Dream Multimedia Dreambox 7000-S, size: 1.0 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Dream Multimedia Dreambox 7000-SAbout Dream Multimedia Dreambox 7000-S
Here you can find all about Dream Multimedia Dreambox 7000-S like manual and other informations. For example: review.

Dream Multimedia Dreambox 7000-S manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Dream Multimedia Dreambox 7000-S please write about it to help other people.
[ Report abuse or wrong photo | Share your Dream Multimedia Dreambox 7000-S photo ]

User reviews and opinions

No opinions have been provided. Be the first and add a new opinion/review.




Dreambox DM7000S

Users Manual
Digital satellite receiver for free and encrypted DVB-TV Programs with optional digital hard disk recording. Communication-Port PCMCIA-Slot for CI-CA-Modules Internal hard disk Compact Flash Slot LC-Display 2 Smartcard Readers Linux OS


1. 2. 3. 3.1. 3.2. 3.3. 3.4. 3.5. 3.6. 3.7. 4. 4.1. 4.2. 4.3. 4.4. 4.5. 4.6. 4.7. 4.8. 4.9. 4.10. 4.11. 4.12. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 14.1. 14.2. 14.3. 14.4. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. 27. 28. 29. 29.1. 29.2. Contents....- 2 Views......- 4 Description Frontview....- 5 CI-Slot.....- 5 Compact Flash Slot....- 5 Smartcard Reader....- 5 Remote receiver....- 5 Channel up/down.....- 5 LC-Display.....- 5 Power-Button.....- 5 Description Rear view.....- 6 Mainspower 230V / 50Hz.....- 6 TV Scart....- 6 VCR Scart.....- 6 HiFi-Amplifier.....- 6 Analogue Audio (Cinch)....- 6 Digital Audio (Toslink).....- 6 Communication Port (Ethernet 10/100MBit, RJ45)...- 6 Mini DIN Socket....- 6 USB Socket....- 6 Serial Socket (RS232C, Sub-D, 9-pin)...- 6 LNB In.....- 6 LNB Out....- 6 Safety instructions....- 7 Delivering.....- 8 Installation.....- 8 Remote Control Overview....- 9 Important Notes about Condition....- 10 Remote Control Describtion....- 11 Dreambox switching on / off....- 13 Sleeptimer....- 13 OSD-Main menu....- 14 Infobar.....- 15 Infobar - EPG (Electronic Program Guide)...- 16 Infobar - Subservices....- 16 Infobar - Audio Track.....- 17 Infobar - Plugins.....- 17 Setup - OSD Language....- 18 Setup - Time Zone....- 18 Setup - Time Correction.....- 18 Satellite Configuration....- 19 Satfind.....- 19 Motor Setup.....- 20 Automatic Transponder Scan....- 21 Automatic Multisat Scan.....- 22 Manual Transponder Scan....- 22 Transponder Edit....- 23 Service Organising - Create new Bouquet...- 24 Service Organising - Add services to Bouquet...- 25 Service Organsing - Edit Bouquets....- 26 Common Interface....- 26 Parental Lock....- 27 Parental lock enable / disable....- 27 Setup lock enable / disable.....- 27 -
30. 31. 32. 32.1. 32.2. 32.3. 33. 34. 35. 35.1. 35.2. 35.3. 35.4. 35.5. 35.6. 36. 37. 38. 38.1. 39. 40. 41. 42. 43. 43.1. 43.2. 43.3. 43.4. 43.5. 43.6. 44. 45. 46. 47. 47.1. 48.
Services locking / unlocking....- 28 A/V Settings.....- 29 OSD Settings....- 30 Skin Setup....- 30 Available Skins....- 31 TuxText position.....- 32 Teletext - Software Decoder (TuxText) activating...- 32 LCD Settings.....- 34 Expert Setup.....- 34 Communication (Network, LAN Setup)...- 35 Communication (Network, WAN (DSL) Setup)...- 36 NGrab Streaming Setup.....- 36 Software Update over Internet...- 37 Software Update manual....- 37 Remote Control.....- 37 Hard Disk - Assembly Instructions...- 38 Hard Disk Setup.....- 47 Recording a movie (spontaneous recording)....- 47 Viewing/deleting/renameing recorded movies...- 48 Recording a movie (Timer recording)...- 49 Timeshift.....- 50 Timer.....- 50 Information - Streaminfo / About....- 51 DreamUp - Software upgrade....- 52 DreamUp - Preparing DreamUp....- 53 DreamUp - Establish a Connection....- 54 DreamUp - Backup Software....- 56 DreamUp - Erasing Software....- 58 DreamUp - Flashing Software....- 60 Dreambox resetting to factory defaults (flash erase)...- 63 Dreambox Hardware reset....- 63 Technical Data....- 64 Contact & Support Information...- 66 Setup-TV-Mode.....- 67 Program sequence....- 67 TV - Codelist.....- 68 -


The Dreambox DM7000S is CE certified and fulfills all requirements of the EU-Standards. Issued: March 2004 Rev.1.0 Software: Release 1.07.4 Alterations are subject to change without notice. E. & O. E. Dream-Multimedia-Tv and Dreambox DM7000S are registered trademarks of Dream-Multimedia-Tv GmbH, Pierbusch 24 D-44536 Lnen Germany


Rear view:

3. 3.1.

Description Frontview CI-Slot Plug in here any CI- or CA-Module of your choice.
Compact Flash Slot The Compact Flash Slot is mentioned to hold a Compact Flash Module. If you want to use a CFModule, shut down your Dreambox using the Deep-Standby-Mode. Plug in carefully your CF-Module into the Compact Flash Slot. The CF-Module is recognised by the System as a hard disk, we recommend to disable the internal hard disk for proper usage. Power back on the Dreambox. To access the Compact Flash Module, choose the File-Mode in the OSD-Main menu. Sometimes it is nessesary to format your CF-Module via the OSD-Menu. See passage Hard Disk Setup.

WARNING! Modifications and changes to the Dreambox leads to loss of warranty. We recommend the installation of a hard disk by your local dealer. Unskilled installtion of a hard disk leads to loss of warranty.
Delivering The box of your DM7000S should contain the following items: 1 receiver Dreambox 7000S 1 powercord 1 remote control 1 users manual (newest release @ ) 2 batteries (1,5V Mignon / AA / LR6) 2 hard disk mounting racks (are premounted) 1 IDE cable 1 molex powercord for the hard disk optional parts: 1 wireless keyboard
Installation Insert 2 AA (1,5V) batteries, taking care to observe the + and - markings indicated inside, into the Remote Control. Before using the Dreambox, please read the safety instructions. Connect the LNB with an appropiate coaxial cable to LNB In at your Dreambox. Connect the Dreambox with an appropiate scart cable to your television screen. Plug in the mains powercord into the mains power socket 230V/50Hz. If you are useing a switchable power socket please shutdown your Dreambox into deep standby before switching off the power socket. If you turn on your Dreambox for the first time, you will see the setup wizzard. The setup wizzard will guide you through the first time installation. You will be asked for your tv norm, the regional settings and your language. Please choose and follow the instructions on the screen. Please notice that the videoformat is set by default to CVBS (FBAS). See passage A/V Settings.

Remote Control Overview

SHIFT-Setup-Button TV-Mode-Button
POWER-Button DREAM-Mode-Button


Arrow-Left-Button Volume-Mute-Button Volume +/- Button INFO-Button Navigation-Buttons AUDIO-Button Option-Buttons (PVR-Mode) TV-Button (PVR-Mode) RADIO-Button (PVR-Mode)
Arrow-Right-Button LAME-Button Bouquet +/- Button DREAM-Button OK-Button VIDEO-Button


Important Notes about Condition All Functions of the Dreambox will be controlled via an OSD-Menu (On-Screen-Display). This makes the Condition of the Dreambox very easy for you. Possible Options are assigned by four coloured dots or beams (red, green, yellow, blue) in the OSD-Menu and are activateable with the Option-Buttons on the Remote Control. Depending on the chosen Menu, the Options do change and are explained via the Help-Button on the Remote Control. The Option-Buttons are assigned with more than one Function. As you can see, under the OptionButtons, TV-Button and RADIO-Button, are Symbols. These Symbols are for the Condition in the PVR-Mode (Private Video Recording). To activate or deactivate the PVR-Mode press the VIDEOButton. You will notice, that the Infobar changes its appearience. You will find more Information about recording at passage Recording a movie (spontaneous recording)

All Menus and Servicelists are closed with the LAME-Button. The Condition of the OSDMenus will be performed with the Navigation-Buttons on your Remote Control.
The LAME-Button is similar to the EXIT function. If you want to enter a Menu press the OK-Button.


- 10 -
Remote Control Describtion SHIFT-Setup-Button This Button is used to program the Remote Control for a TV Device. See Passage Setup-TV-Mode POWER-Button This Button switches your Dreambox on or off. See passage Dreambox switching on / off. TV-Mode-Button This Button turns the Remote Control into TV-Mode. The TV-Mode-Button flashes shortly, if you press this or any other Button in this Mode. The Remote Control controls now your TV. DREAM-Mode-Button This Button turns the Remote Control into Dream-Mode. The Dream-Mode-Button flashes shortly, if you press this or any other Button in this Mode. The Remote Control now controls the Dreambox. Numeric-Keyboard Enter a Service number direktly over the Numeric-Keyboard. The Service numbers are on the left Side of the Servicelist. In the OSD-Mainmenu are numbers shown in front of the Option or Function, in this case you can enter the desired number to access the Option or Function directly without moving the Cursorbeam to it. Arrow-Left-Button Arrow-Right-Button
These Buttons enable to jump back- or forwards through the Playlist. The Playlist contains the last chosen Services and Movies, that have been selected. Once having opened the Servicelist, you are able to jump at the Beginning or the End of the Servicelist or to the next Marker. Volume-Mute-Button This Button mutes the Volume. A crossed Speaker Symbol will appear on the TV Screen. Pressing it again or the Volume +/- Buttons, brings the Audio back. LAME-Button This Button exits all Menus and aborts Operations. Its the same as EXIT. Volume +/- Button These Buttons increase (+) or decrease (-) the volume. Bouquet +/- Button These Buttons switch through the Bouquets forwards (+) and backwards (-). INFO-Button This Button shows the EPG Informations. Pressing this Button twice, shows the StreaminformationMenu.

- 11 -

Navigation-Buttons These Buttons control the Cursor beam inside the Menus to reach the desired Option or Function. OK-Button This Button shows the Infobar if no OSD-Menu is shown. This button enters a chosen OSD-Menu Option or Function. DREAM-Button This Button shows the OSD-Mainmenu. If a Servicelist is opened, press this Button to enter the Service-Menu. AUDIO-Button The AUDIO-Button shows the available Audio-Tracks of the selected Service. VIDEO-Button This Button activates or deactivates the PVR-Mode. By pressing this Button a couple of times, if a Servicelist is opened, it changes the View of the Servicelist. Option-Buttons These Buttons activate the shown Options. They also control the PVR functions in PVR-Mode. TV-Button This Button activates the TV-Mode. It also keeps the Stop-Funktion in PVR-Mode. HELP-Button This Button brings up the Help menu. RADIO-Button This Button activates the RADIO-Mode. It also keeps the Record-Function in PVR-Mode. TEXT-Button This Button activates the Teletext - Sofware Decoder. If a Servicelist is opened, this Button jumps directly to the File-Mode.

- 22 -

Transponder Edit Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (2) Service Searching -> (4) Transponder Edit. This Menu keeps all known satellites the Dreambox scans for. If you recognize a missing satellite, add or edit the satellite. Pressing the OK-Button on the sat-button, enters the Satellite Edit Menu. Pressing the OK-Button on the add-button, adds a new frequency to the selected satellite. Pressing the OK-Button on the edit-button, edits the Transponder Values for the selected satellite. Pressing the OK-Button on the remove-button, removes a transponder frequency from the selected satellite. Pressing the green Option-Button adds a new satellite. Pressing the red Option-Button deletes a satellite. Follow the Instructions on the Statusbar. Network search: The NIT holds the Information about the Satellites and the TV/Radio- Programs. (NIT = Network Information Table) Extended network search: Set a check to scan Transponders the NIT from other
Skip known Networks: Unchecking this, decreases the satscan. The NIT will not be used.

Use BAT:

Bouquet Tables of the Provider will be used, if available. (BAT = Bouquet Association Table) Press the green Option-Button to save.

- 23 -

Service Organising - Create new Bouquet The Bouquets are used to save your favorite services from the Main Servicelist into one simple bouquet. You can ether add a TV, Radio or a File Bouquet. In this example we only describe creating a TV Bouquet, because its always the same procedure. Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (1) Service Organising -> (1) Create new Bouquet. This Menu shows the Bouquet Dreambox allows you to add. Select TV and press the OK-Button. Types, the
Enter a name of your choice with the NumericKeyboard on your Remote-Control. Press the yellow Option-Button for lower or uppercase letters. Press the blue Option-Button for numerics or letters to come first. Press the Volume + Button to insert a letter or space. Press the Volume - Button to remove a letter or space. Press the OK-Button to save. The System will guide you back to the Menu Service Organising. To verify your created Bouquet, choose (3) Edit Bouquets from the Menu Service Organising and press the OK-Button. Choose from the next Menu Bouquets, Bouquets (TV) and press the OK-Button. The Bouquet has been created. Press the LAME-Button to exit. The System will guide you back to the Menu Service Organising.

- 24 -

Service Organising - Add services to Bouquet Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (1) Service Organising -> (2) Add services to Bouquet. This Menu shows the Bouquet Types, Dreambox allows you to add services to. Select TV and press the OK-Button. the

29.1. Parental lock enable / disable Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (5) Parental Lock. To enable Parental lock, set a check in front of Parental lock. The Button change PIN appears. Navigate to this Button and press the OK-Button to enter a PIN your choice. Reenter the PIN. If you dont want to see locked services inside the Servicelist, set a check in front of Hide locked services. To disable Parental lock, uncheck the checkbox from Parental lock and enter the PIN to verify. Press the OK-Button to save.
29.2. Setup lock enable / disable Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (5) Parental Lock. To enable Setup lock, set a check in front of Setup lock. The Button change PIN appears. Navigate to this Button and press the OK-Button to enter a PIN of your choice. Re-enter the PIN. To disable Parental lock, uncheck the checkbox from Setup lock and enter the PIN to verify. Press the OK-Button to save.

- 27 -

Services locking / unlocking Press the TV-Button to bring up the Servicelist. Choose the Service you want to lock / unlock and press the DREAM-Button. You can lock / unlock services in any Servicelist. Press the desired Option-Button to enter either All Services, Satellites, Providers or Bouquets.
After pressing the DREAM-Button the Service Menu appears. Navigate to the option lock / unlock and press the OK-Button to lock / unlock the selected service.
Beside the selected service appears the Symbol for a locked service. If you want to view / unlock this service next time you select it, you will be asked for the PIN. Enter the PIN to view / unlock this service. After unlocking the Service, the Symbol for a locked service will disappear.

- 28 -

A/V Settings Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (3) Sytem Settings -> (2) A/V Settings. Use ether the Navigation-Buttons left and right or the OK-Button to change or set the Values. Color Format: CVBS(FBAS), RGB (Red, Green, Blue seperated), SVideo (Color- and Brightnes signal seperated) and YPbPr (Component signal e.g. for Projectors). Aspect Ratio: 4:3 letterbox (standard), (16:9 programs will be displayed on 4:3 TVs with black beams at top and bottom) 4:3 panscan (16:9 programs will be zoomed to full high on 4:3 TVs, parts of the picture on the left and right side will cut off) 16:9 (programs transmitted in 16:9 will be displayed automatically in 16:9, on 4:3 TVs the picture will be reduced in height) always 16:9 (for 16:9 TVs, on 4:3 TVs the picture will be reduced in height) TV System: PAL, PAL+PAL60, Multinorm and NTSC Select the Norm your TV supports. We suggest to choose Multinorm. Auto VCR switching: Activating this function (standard) switches the Videosignal from the VCR socket to the TV. Depending on the used VCR, switching takes affect by turning on the VCR or starting playback. disable WSS on 4:3: Set a check into the Checkbox to disable zooming on some 16:9 TVs during 4:3 transmissions. AC3 default output: If a program is transmitted with an AC3 Audio-Track (e.g. Dolby Digital), the Dreambox switches automatically to this Audio-Track. The AC3 Signal will only be available at the optical socket. The Dreambox has no built-in Dolby Digital Decoder, AC3 signals are not available on the analogue socket, therefore you need an external Dolby Digital Amplifier to adjust the Volume. Press the green Option-Button to save.

- 29 -

OSD Settings Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (3) System Settings -> (4) OSD Settings. Use the Navigation-Buttons left or right to decrease or increase the selected slider. Alpha: Setup how much the tv picture should be visable through the OSD. Brightness: Setup the Brightness of the OSD. Contrast: Setup the Contrast of the OSD. Show Mainmenu like Listbox: Set a check into Checkbox to enable listboxview of the OSD-Mainmenu. Change skin: Setup a new skin. See passage Change Skin. TuxText position: Setup the TuxText position. See passage TuxText position. Press the green Option-Button to save.
32.1. Skin Setup Press the DREAM-Button to enter the OSD-Main menu. Go to (6) Setup -> (3) Sytem Settings -> (4) OSD Settings, press the blue Option-Button (change skin). A skin changes the appeareance of the OSD. The defaultskin is Screwed Stone. Please take a look at passage Available Skins to make yourself a picture of this. Navigate to a Skin of your choice and press the OKButton to activate. The Dreambox will ask you to restart Operationsystem to apply the new skin. the

- 30 -

32.2. Available Skins

Bluenigma BIG


Screwed Stone

Silver Metal
Simple and Stylish 16:9 has the same look like Simple and Stylish, but is optimized for 16:9 TVs.

Simple and Stylish

- 31 -
32.3. TuxText position Press the DREAM-Button to enter the OSD-Mainmenu. Go to (6) Setup -> (3) Sytem Settings -> (4) OSD Settings, press the yellow Option-Button (TuxText position). What is TuxText? TuxText is a Plugin (additional Software), which allows the Dreambox to decode the digital Teletext. TuxText is more faster and easier to use. This Menu is used to adjust the Position of the TuxText. Maybe the Clock does not appear or the Textpages are not shown in the middle of the screen. Press the HELP-Button for more information. The red Option-Button enables the Top left Point of the rectangle. The green Option-Button enables the Bottom right Point of the rectangle. Use the Navigation-Buttons down/right for the Top left rectangle and up/left for the Bottom right rectangle to adjust. Press the OK-Button to exit Attention: If you dont see any rectangle, then they are out of range. Please adjust the rectangle into the middle of the screen. 33. Teletext - Software Decoder (TuxText) activating What is TuxText? TuxText is a Plugin (additional Software), which allows the Dreambox to decode the digital Teletext. TuxText is more faster and easier to use. Press the OK-Button to bring up the Infobar to be sure the PVR-Mode is not activated. The blue Option-Button activates in this mode the Plugins menu.

The PVR-Mode is activated if the Infobar shows the PVR control symbols. The blue Option-Button controls the fast forward function in this mode. Press the VIDEO-Button to deactivate the PVRMode. Please remember, not every service provides Teletext Information! Press the blue Option-Button, the Plugins menu appears. Press the OK-Button to activate the Teletext - Software Decoder (TuxText). TuxText interactive Navigation: Press the OK-Button to enter the interactive mode. Use the Navigation-Buttons to select a textpage and press the OK-Button to call this site. You dont need to type in a Textpagenumber in this mode. Press the LAME-Button to exit.

- 32 -

TuxText viewing options: Press the Volume-Mute-Button a couple of times to switch to alpha-mode, invisible-mode and fullmode. The alpha-mode shows the picture from the running program through the Textpages. The invisible-mode shows the complete picture from the running program without exiting the TuxText. The full-mode brings back the Textpage. Press the Volume + Button to toggle between double high from the upper half, double high from the lower half and full view Textpage. Press the Volume - Button to activate or deactivate the PIG-Mode (Picture in Graphics). Same view from Textpage and Program picture. (best results are show on 16:9 TVs during 4:3 transmission). TuxTxt Konfigurationsmenu: Press the DREAM-Button to enter the TuxText Konfigurationsmenu. We are sorry, at the moment, this menu is only available in german. Teletext Auswahl: Use the Navigation-Button left or right to choose another Teletext provider from the current Transponder and press the OK-Button to view. Bildschirmformat (Aspect Ratio): 16:9 im Standard-Modus = ein/aus (16:9 during Standard-Mode = enable/disable) Enabling this, shows the TuxText in 16:9 Aspect Ratio. Press the OK-Button to enable or disable. Default is disabled. 16:9 im TextBild-Modus = ein/aus (16:9 during TextPicture-Mode = enable/disable) Enabling this, switches the TV to 16:9 Aspect Ratio if the PIG-Mode is activated with the Volume Button. Press the OK-Button to enable or disable. Default is disabled Attention: On some older 4:3 TVs these Modes may not work. If enabled, it could happen, that your TV switches away from the VCR or A/V socket. The reason is a technicial problem. The Switchsignal on the Scartconnector is at PIN 8 using 12 Volts. Using a 16:9 Aspect Ratio switches the PIN 8 to 6 Volts, which some older 4:3 TVs can not handle. If you are using a 4:3 TV, we suggest not to enable these Modes. Helligkeit (Brightness): Anzeige 1/3 reduzieren = ein/aus (Display 1/3 reducing) Enabling this, reduces the Brightness by 1/3. It makes the Display of the TuxText more smoother. If you are watching Teletext Subtitles its recommened to disable. Press the OK-Button to disable or enable. Default is enabled. nationaler Zeichensatz (national Codepage): automatische Erkennung = ein/aus (automatic detection = enable/disable) The national Codepage detection is used to display the Teletextpages with the right letters for your location. Press the OK-Button to disable or enable. Default is enabled. If disabled, use the NavigationButtons left or right, to choose your Codepage.

Attention: The Infobar disappears after a couple of seconds. Press the OK-Button to bring up the Infobar. During PVR-Mode the Option-Buttons are assigned as follows:
RADIO-Button: start recording TV-Button: stop red Option-Button: fast rewind green Option-Button: start playback yellow Option-Button: pause blue Option-Button: fast forward

- 47 -

38.1. Viewing/deleting/renaming recorded movies Press the DREAM-Button to enter the OSD-Main menu. Go to (3) File Mode. You can also enter the File-Mode using the Navigation-Buttons up or down without entering the OSDMain menu, to bring up the Servicelist. Press the TEXT-Button to enter the recorded movies list. Watching: Select a movie by pressing the OK-Button. The Playback starts. Remember allways to activate the PVR-Mode before controlling a recording or play of a service by pressing the VIDEO-Button. Press the TV-Button to stop playback. Deleting: Choose a movie to delete using the NavigationButtons up or down. Press the DREAM-Button. The Service Menu appears. Select delete and press the OK-Button. Renaming: Choose a movie to rename using the NavigationButtons up or down. Press the DREAM-Button. The Service Menu appears. Select rename and press the OK-Button. Change the Name of the Movie in the next window.

- 48 -

Recording a movie (Timer recording) Attention: Timer recording works only in Standby-Mode, not in Deep-Standby-Mode. Open a Servicelist using the Navigation-Buttons up or down or pressing the TV-Button. Select a service you want to programm into the Timer. Watch this service for a couple of seconds until the red EPG dot in the Infobar appears. Remember, not every service provides EPG Informations. Press the red Option-Button. Choose an event and press the green Option-Button to add it to the Timer.
The Timer Edit window appears. Repeated Timer: Set a check to enable this Event to record for a couple of days or the whole week. You can change the starting and ending Time for this event by navigating to its desired fields. Type in the new Time with the Numeric-Keyboard. Navigate to the Dropdownlist record DVR to change the record method. Possible methods are: Switch the Timer switches to this event. Record DVR the Timer records this event. Ngrab the Timer records to a Ngrab PC. Press the green Option-Button to apply. The Event will be marked as a Timerevent in the Servicelist.Press the LAME-Button to exit the Servicelist. To verify a Timerevent, press the DREAM-Button to enter the OSD-Mainmenu, go to (9) Timer. The Timer list appears.

- 49 -

Timeshift Activate the PVR-Mode by pressing the VIDEO-Button. Record at least a service for 1 minute. Now you can rewind, pause and forward the movie during record. This is a useful function, maybe the phone is ringing and you dont want to miss the running program.
Timer Press the DREAM-Button to enter the OSD-Main menu. Go to (9) Timer. Attention: The Timer works only in Standby-Mode, not in Deep-Standby-Mode. The Timer list keeps all programmed Timerevents. This could be a Sleeptimer or a Timerevent for recording or switching to a service. A completed Timerevent will be listed with a green check in front. An aborted or missed Timerevent will be listed with a red cross in front. Please add a Timerevent only from the EPG. Press the red Option-Button to remove an entry.

- 50 -

Information - Streaminfo / About Press the DREAM-Button to enter the OSD-Main menu. Go to (4) Information. Press the OK-Button to enter the Streaminfo. Use the Navigation-Button right to open the following windows. Use the Navigation-Button left to go back. Navigate to About and press the OK-Button to enter. Press the LAME-Button to exit.
This window shows detailed Information about the chosen Service.
This window shows Information about supported and used coding systems.
This window shows technicial Information about the chosen Service.
This window shows the Manufacturer Product Type. Processor Type Frontend Type Harddisc Vendor Infos And the currently installed Software Release. Press the green Option-Button to exit.

- 51 -

DreamUp - Software upgrade
!!!! Very important, please read this passage completely, before starting upgrading !!!!
Dreamup and the Images (Software) for the DM7000S are available at our Website
Remove all cables from the Dreambox. Connect only the serial and the Patchcable. The Mainspowercord is disconnected.
You need a Windows PC with a serial port (COM1 or COM2) and an Ethernet card. Connect the Ethernet card with the Dreambox Communication port using a Crossover Patchcable. Connect the serial ports with a serial nullmodem cable.
How to figure out the IP-Address in Windows (W98,W2K,XP) : Click Start -> Run -> type in Command -> press Return. A Dosbox opens. Type at the Dosprompt ipconfig /all and press Return. The IP-Address will be listed. If you have more than one Ethernet adapter listed, then take the first adapter. If you dont see an IP-Address, maybe you have no Ethernet card installed or configured. Refer to Windows Help or consult a Technician for assistance.

- 64 -

Output analog: Output Level L/R 0,5 Vss on 600 Ohm THD > 60 dB (1 kHz) Crosstalk < -65 dB Output digital: Output Level 0,5 Vss on 75 Ohm Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz S/PDIF-Output optical (AC3) Video parameter: Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm Teletext filter in conformity with ETS Standard TV-Scart: Output: FBAS,RGB,S-VHS over OSD selectable VCR-Scart: Input: FBAS,RGB,S-VHS Output: FBAS,S-VHS Serial Interface RS 232: Typ RS232 bidirectional Bitrate 115,2 kBit/s max. Plug Connector SUB-D-9 Function Update of Firmware and Preprogramming Ethernet: 100 MBit compatible, bi-directional interface Function Update of Firmware and Preprogramming USB: USB 1.2 connector Mini DIN: I2C for stearing of external devices (Option Rotor) IR funktion Pins: 1 5V 2 SDA (I2C-Kanal 2) 3 SCL 4 3,3V 7 GND 8 IR-Output 9 GND UDMA66 IDE Interface: Intern for connect HDD max. 500mA up to 300 GB capacity till release 1.07.4 Compact Flash - Reader LNB power and polarisation: LNB Current 500mA max. ; short-circuit-proof LNB Voltage vertical < 14V without load, > 11,5V at 400mA LNB Voltage horizontal < 20V without load, > 17,3V at 400mA LNB shut-off at Standby-Mode Count of active satellite position: DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION DiSEqC - Rotor Control

- 65 -

Power consumption: < 20W (in operation, horizontal polarization / 400mA LNB current) < 11W (in operation, without LNB) Input voltage: 110 - 230V / 50,60 Hz alternating acurrent +/- 15% Physical specification: Ambient Temperature +15C.+35C Humidity < 80% Size (W x D x H): 374 mm x 230 mm x 75 mm Weight: 1,8 kg without HDD 46. Contact & Support Information
Headquarter & Distribution: Dream-Multimedia-Tv GmbH Pierbusch Lnen Germany Dealer Hotline: (only Dealer) Tel: 0180 - - 000 Fax: 0180 - - 001 Mo - Fr. 10:00 am - 05:00 pm Technicial Hotline: Tel: 0180 - - 777 Fax: 0180 - - 778 Mo - Fr. 09:00 am - 12:00 pm and 01:00 pm - 04:00 pm
Dealers & Pricing: E-Mail: Technical Support: E-Mail: Website: Weblink: Support Forum: Weblink: Software Support (actual images): Weblink DM7000:
Digital unterschrieben von Daniel Doege CN: CN = Daniel Doege, C = DE, O = Dream-Multimedia-Tv GmbH, OU = Support Ursache: Ich bin der Verfasser dieses Dokuments Speicherort: Lnen Datum: 2004.03.26 01:52:25 +01'00'

- 66 -

Setup-TV-Mode Choose a code from the TV - Codelist for your TV and follow this procedure to programm the Remote Control for your TV.


SHIFT-Setup-Button ! digit ! digit ! digit ! digit
47.1. Programsequence Press the TV-Mode-Button. Press the SHIFT-Setup-Button for at least 2 seconds, the TV-Mode-Button blinks two times. Enter each digit step by step. The TV-Mode-Button blinks after each digit. A valid code will be confirmed by blinking two times the TV-Mode-Button. The Remote Control exits the Program sequence automatically. If you dont enter a digit for at least 10 seconds, the Remote Control exits the Program sequence automatically.

- 67 -

TV - Codelist
A.R. Systems Accent Admiral Adyson Agashi Agazi AGB Agef Aiko Aim Akai Black Star Blacktron Blackway Blaupunkt Blue Sky Blue Star Bondstec Boots BPL Brandt Brinkmann Brionvega Britannia Brother Bruns BSR BTC Bush 0590 0247
Akiba Akura Alba Alcyon Allorgan Allstar Amplivision Amstrad Anglo Anitech Ansonic Apollo Arc en Ciel Arcam Aristona Arthur Martin ASA Asberg Asora Asuka Atlantic Atori Auchan Audiosonic Audioton Ausind Autovox Awa Ayomi Baird Barco Basic Line Bastide Baur Bazin Beko Beon Best Bestar Binatone Deitron Denko Desmet Diamant Digiline Dixi Domland Drean DTS
Capsonic Carad Carena Carrefour Cascade Cathay CCE Centurion Century CGE Cimline City Clarivox Clatronic Clayton CMS Hightec Concorde Condor Contec Continental Edison Cosmel Crezar Crosley Crown CS Electronics CTC Cybertron Daewoo Dainichi Dansai Dansette Dantax Datsura Dawa Daytron Decca General Technic Genexxa Germanvox Goldhand Goldline GoldStar Goodmans

- 68 -

Dual Dumont Dux Dynatron Elbe Elcit Elekta Elin Elite Elman Elta Emerson Emperor Erres Etron Euro-Feel Europa Europhon Expert Exquisit Fenner Ferguson Fidelity Filsai Finlandia Finlux Firstline
Fisher Flint FNR Formenti Fortress Fraba Friac Frontech Fujitsu Fujitsu General Funai Galaxi Galaxis GBC GE Geant Casino GEC Geloso General Interfunk Internal Intervision Irradio Isukai ITC ITS ITT ITV Jea JEC JVC Kaisui Kamp
Gorenje GPM Gradiente Graetz Granada Grandin Gronic Grundig Halifax Hampton Hanimex Hanseatic Hantarex Hantor Harwood HCM Hema Hemmermann Hifivox Hikona HiLine Hinari Hisawa Hit Hitachi
Hitsu Hornyphone Hoshai Huanyu Hygashi Hyper Hypersonic Hypson Iberia ICE Ices Imperial Indesit Indiana Ingelen Inno Hit Innovation Interactive Interbuy Matsui

Please fill out this form clearly and completely. Send it back to your dealer/distributor of your country. It is very important that you write in clear letters - this accelerates the procedure and makes it more simple. Without a copy of the original invoice no service will be effected. Please do only return defective parts (no accessories) - please keep the harddisk installed
Customer-no. Name/Company Responsible person: Street: Country/Zip code/Place

Date of return:

Telephone: Fax: E-mail:

Returned article:

(name of type)

Serial-no.: Soft-ver.:

Equipment (e.g. HDD)

Dream - contact data

contacted person: communication by./at.)
Description of mistake / order (please in detailed form and clear letters):
An execution of your order can only be effected with detailed description of the mistake - statement "defect" is not clear enough - in this case we will return box without repairing
reason of return: guarantee repair fee required repair display modification (not free of charge)
desired display-colour: __: blue __: green __: white __: amber
other: power supply modification (free of charge)
__: only clear display window
By my signature I declare that I agree to repairs up to 30,- without any consultation with Dream-Multimedia-TV. This order will not be effected without signature.


Notice: Please pack the unit in a plastic-bag or foil. Please use original packing, if it doesn't exist anymore use a thick padded box - so scratches on display and box are avoided. Thank you very much.



Mhcc50 Review Model 9 TX-32PM11 SCX-4828FN Kenox S630 Multiface MVX300 Powershot A310 SMT-1721P Handle KDC-7090R Photo 20 1 1 Pages EL-501V 6265 Cdma EX 110 AX-M138 D-550 Zoom Coupe 2003 PX-A740 Revenge CDX-SW200 HVL-F42AM Nvgs27EE FC-20 Hunter Game SF-300-48 Digital CX-programmer V9 CD1401B 02 Elexia II NV-G500EM Gpsmap 60C ME5050A Dbtel-J6 Series XV6600 K2500 LSP2 1000 Legend 29PT5506 Continuum YP-T5V D-JIX T820 K2700 D1010 Sa10175 SD4504 M-robe 100 KP-46S4 MD-MT15 CQ-RX400U GR-D815 DVP-1040 GTO402 SRC2496 VDR-D160GC BCR-NWU7 SP-J500 Silver SA-HT900 TM-T90 Firebox GVN52 Flyer LE40A558p3F Deus EX DC912 ST290 Smartdraw E2500 Rc 8 MX2442A Dmc-fx07 IR2016 Urc-3050 Simulator 2000 SF-331P PDP-436HDG Ethernet WM3431HS DVD-V1000 KDL-46Z4500 6408 Plus SW-40HT Xvc 2533 D-copia 18MF CDP-XA5ES Server 1000 RCA MX700 85276 MHC-RG40 4501 MF TX-SR804E BL421RC Lide 60 Series Finepix F100


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101