Bass Tool & Supply, Inc. www.basstool.com Houston (713) 682-1889

< Previous Page

FAX (713) 681-4931

Next Page >

Toll Free 800-442-0042

DREMEL

#395 MOTO TOOL

Variable Speed

Two-Speed Moto-Tool Kits
Turns your Dremel tool Has English and Metric
into a versatile work station. depth marking.

KIT # 3962

Allows movement up and Includes storage for tools Base has English and Met-
down and will tilt up to 90. and accessories. ric marking.
Moto-Tool (5,000-30,000 RPM) allows user to select right speed for every job. Ball bearing motor reduces friction. Tapered housing for comfort and finger tip control. New thrust bearing for drilling. New keyless chuck for 1/8" shank bits. Deluxe storage/carrying case. Guide Book

MODEL 395

DESCRIPTION
395 MOTO-TOOL ONLY PLUS 5 ACCESSORIES

MODEL 3962

PART# 1-DML
3962 MOTO-TOOL KIT 72 ACCESSORIES INCLUDED

116.55

16" 2-SPEED SCROLL SAW
DREMEL Model in. Two Speed Scroll Saw featuring the Quick change Blade System. Ideal for cutting metals, plastics, hard woods, and soft woods up to 2 in. thick. The 1672 Features: Two holders for placement of the optional lamp. Convenient dust port for vacuum hose attachment. 12 in. round, cast aluminum table. Direct drive induction motor with two speeds. Low speed: 890 strokes per minute. High speed: 1790 strokes per minute. 3/4 in. blade stroke. Adjustable 45 tilt table locks in position (0-45) for accurate bevel cuts. Cuts 2 in. thick material at 0 and 1 in. thick material at 45. Sawdust blower keeps cutting area free of sawdust for more accurate cutting. Accepts both pin and plain end blades. Overall dimensions 27.5L x 14.5/8W x 14.3/4H.
225 Flex-Shaft Attachment
Attaches to Moto-Tool Nos. 275, 285 and 395 only. Versatile 36" long cable with comfortable 1/2" diameter slip-grip handpiece allows finger-tip control to carve, sand, polish, clean, engrave, cut and more.

1-DML-220-01

NOTE: Tool and bits not included.

# 427 Polishing Wheel

PART# PRICE 1-DML

1/4 dia. X 7/8 long

P/N 1-DML-427 Shown Above With # 424 Screw Mandrel. Used For Polishing Of Flat Or Curved Metal Surfaces.

Weight 45 lbs.

Model 1672 Scroll Saw Includes: A quick change blade adapter and t-wrench. Two plain-end blade adapters. A selection of 13 blades Two allen wrenches

MANDRELS 1/8" SHANK

DESCRIP- PART# PRICE TION 1-DML

SAW # 1672 1672

221.00
Screw Mandrel Is Used With Polishing Accessories Mandrel To Be Used With All Cutting Wheels, Sanding Discs And Polishing Wheels Screw Mandrel To Be Used With No. 427 Polishing Wheel

2.35 2.44 2.44

NOTE: Variable Speed, 18" Capacity Saw, Model 1830-01 Available. Please inquire.
BRUSH ACCESSORIES (1/8" Shank)
Don't exceed 15,000 RPM 3/4" dia. 530

3/4 1/2 1/8

Cut-Off Wheels
For slicing and cutting metal, wood and plastic. Cut-off wheels make it easy to cut or slot bolts, screws,

1/2" dia. 531

1/8" dia. 532
Cut-off wheel cuts only along its edge. Use with #402 Mandrel.
sheet metal, thin wood and plastic.
Hard abrasive disc with a dia of 15/16" and a thickness of 0.025" (pkg of 36). Hard abrasive disc with a dia. of 15/16" and a thickness of 0.040" (pkg of 20). Fiberglass reinforced disc with a dia. of 1.1/4" and a thickness of 0.045" (pkg of 5).

4.93 5.32 7.11

NYLON BISTLE
PART# 1-DMLCARBON STEEL STAINLESS STEEL

531 532

198 199
1/4 5/16 5/16 1/4 1/4 1/8 1/4 5/16 1/4 1/4 5/16 5/16 3/32 1/8 3/16 5/64 1/8 7/32 9/32 3/8

SANDING ACCESSORIES

413 DISCS

Sold in package qty.

407 DRUM

High-Speed Cutters

High speed cutters

PART# PKG. 1-DML QTY.

DRUM SANDER 1/2" dia. , 1/8" shank DRUM SANDER BAND 1/2" dia. coarse (60) grit. DRUM SANDER BAND 1/2" dia. fine (120) grit. SANDING DISC 3/4" dia. coarse (180) grit (use w/Mandrel No. 402) SANDING DISC 3/4" dia. medium (220) grit (use w/Mandrel No. 402). SANDING DISC 3/4" dia. fine (240) grit (use w/Mandrel No. 402).
can be used for shaping, hollowing, grooving, slotting and making tapered holes in soft metals, plastics and woods. Made from high-speed steel. 1/8" Shank

- 1433 -

Reversible Paddle switch 150 RPM Free Speed 50 lbs torque 3 SCFM @ 90 PSI 1/4" NPT air inlet For 3/8" ID hose Net weight: 2.1/2 lbs.
CAPACITY PART# 1-829 PART# 1-829

29.82 39.25

3/8 1/2

102 103

22,000 RPM Free Speed 1/4" Inlet 3/8 geared chuck Rear exhaust 3-SCFM @ 90PSI Paddle handle Wrench
3/8" & 1/2" REVERSIBLE DRILLS

7 PC. AIR HAMMER KIT

CUT-OFF TOOL
Chuck Size Speed RPM Spindle Thd. Air Cons. CFM Length Weight PRICE

1-829- 1-829301 303

3/3/8-24 5.2.1/4 42.09 1/3/8-6.3/85.75
For muffler work 4 Air Chisels: 1-bushing splitter, 1 - tapered punch, 1 - ripping chisel, 1 - welding buster 4500 blows per min. 5/8" Stroke 4-SCFM @ 90 PSI 1/4" NPT air inlet For 3/8" ID hose Net weight (hammer only): 2.1/2 lbs.
FLORIDA PNEUMATIC AIR RIVETER MODEL FP-891
External regulator Clear plastic shield Finger guard 18,000 RPM Free Speed 4-SCFM @ 90 PSI For 3/8" ID Hose Net weight: 2.1/2 lbs.

PART# PRICE 1-829

FP-891 309.75 Tool features 2000 lbs of pull. Comes equipped with three sets of hardened steel jaws, for 1/8", 5/32", and 3/16" dia. aluminum rivets. 3.1/2 lb., 11.3/4" long, 1/4" air inlet, 3/8" ID hose size, 90 PSI rec. air pressure. Avg. consumption per stroke 1.5 CFM

5PC AIR BLOW GUN SET

Set Includes: 1-Blow gun with rubber tip 3- Safety extension tubes 1- Male tip

AIR BLOW GUN

PART# 123600-0170

- 1415

QUALITY AIR TOOLS & ACCESSORIES
1/4" Air Die Grinder Kit

Kit Includes:

Precision Air Pencil Grinder
For 1/8" Shank Tools
Die Grinder, 1/8 & 1/4" collet, 10 pc Mounting stones Variable speed throttle for positive speed control Rear exhaust Speed (RPM). 22,000 Collet chuck. 1/4 & 1/8" Air inlet (NPT). 1/4" Hose size (ID). 3/8" Air-pressure (PSI). 90 Air consumption (CFM). 3 Length. 6.5/8"
Speed 54,000 RPM Air Pressure: 85 PSI PART# PRICE Diameter: 5/8" 2-222-222 26.55 Hose Length: 5' Body Length: 5.1/4" Weight: 3/4 lb

PART# 7-600

Recommendations: Keep the adequate lubrication to the air line motor through an inline lubricator (for 1/4": 1-816-40014, for 3/8": 1-816-40038) Keep the air pressure below 85 lb/in. by using air regulators (for 1/4": 1-816-88002, for 3/8": 1-816-88003).
18 pc Air Tools Service Kit
18 dirrerent versatile accessories made

7-600-0100

1/4" Mini Air Die Grinder
Lightweight construction Ball bearing construction Variable speed throttle

to improve the efficiency of air tools

KIT INCLUDES

Speed (RPM). 22,000 Collet chuck. 1/4" Length. 4"
Quick coupler Female connector Male connector Universal adapter Valve repair tool Safety nozzle Air gauge Blow gun Large bore
Valve core Needle chuck Screwon chuck Tapered rubber tip High pressure nozzle Taper chuck Chuck adapter Dual Tire chuck Power wire brush

Mini Air Belt Sanders

Lightweight and highly effi Swing position grip rotates Muffled rear exhaust directs air
cient sanders reduce arm fatigue. 360.
Piston Type Air Blow Guns
1/4" Quick - Coupler Set
Air requirements: 90psi - 3/8"
away from work surface 80 to 82 dB. ID hose
BELT cfm LENGTH PART# PRICE SIZE Folded Max. 5003/8 x 1/2 x 3/4 x 20.65 12.4 9.84 11.42 202-2419 77.08 16.93 202-2420 83.51 13.58 202-2421 97.65
1/4" NPT air inlet 16,000 rpm Include two belts, hex wrench

LENGTH PART# PRICE 7-600

4" 13" 0179 0180

3.52 5.04

7-600-0171

and hose nipple.

INDUSTRIAL AIR TOOLS
1/4" Straight-Handle Die Grinder FP-3751 Utility Cut-Off Tool FP-3801A
5" Hi-Speed Sander FP-2000
MADE IN USA 1 YEAR WARRANTY
This straight-handle design is ideal for work in hard-to-reach spaces. FP-5908 1/4" to 1/8" collet insert reducer available. (PART# 1-FLO-FP-5908)
Heavy-duty shear and grinder in one versatile, lightweight tool. cuts through muffler clamps and hangers with ease. Slices sheet metal, radiator hose clamps, rusted bumper bolts, even 3/4" thick steel rods. Great for autobody work - grinds burrs and rough edges fast. Comes with 2 abrasive discs. Replacement discs part no. 122060 (set of 6). RPM. 20,000 Wt. 1.3/4 lbs Length. 7" Air. 90 PSI, 4 CFM Inlet. 1/4 Hose ID. 3/8
Great for use on any surface, this powerful sander has a four-vane motor with minimal vibration for touch-up, feather-edging and production sanding. Features an impact-resistant nylon handles and spring-mounted trigger. Includes 3", 4.1/2" and 5.1/2" dia. backing discs for added support and versatility. RPM. 20,000 Spindle. 7/16"-20 Wt. 1.3/4 lbs. Length. 7.3/4" Height. 5" Inlet. 1/4" Hose ID. 3/8" Air. 90 PSI, 4 CFM
RPM. 20,000 Collet. 1/4" Wt. 1.1/2 lbs Length. 5.1/2" Air. 90 PSI, 4 CFM Inlet. 1/4 Hose ID. 3/8

PART# 1-FLO

FP-3751

FP-3801A

FP-2000
Hi-Speed Straight-Handle Air Drills FP-3251 - 1/4" FP-3501 - 3/8"
S trai ght-hand l e desig n f or t h os e hard-to-reach areas. Direct-drive cant be damaged by overloading. Drill, hone, brush and deburr without shock hazard. Available with 1/4" (FP-3251) or 3/8" (FP-3501) Jacobs chuck.

FP-772 3/4" Impact Wrench
Specifications: 5000 RPM free speed, 3/4" square drive, 1" bolt capacity, 700 ft/lbs. maximum torque at 90 PSI, weighs 11.1/2 lbs., 10" in length, 1/4" air inlet, 3/8" ID recommended hose size, 90 PSI air pressure, 7.1/2 CFM air consumption.

FP-734

188.25

FP-720A

196.50
FP-1020 Regular Duty Pistol Grip Air Hammer
This is the Florida Pneumatic Blitz Gu n s h o w n w i t h t h e pa tented FP-5130 safety chuck attached. Hammer features durable, lightweight nylon handle. Especially designed for muffler removal and exhaust system work. Specifications: Weighs 2.5/8 lbs., 6.1/4" length. 3700 blows per minute,.401 shank opening, 1/4" air inlet. 3/8" ID recommended hose size, 90 PSI air pressure, 4 CFM air consumption.

FP-772

684.34
FP-1051 Straight Handle Needle Scaler
Specifications: 4.5/8 lbs., 16.1/2" in length. 3700 BPM, 1/4" air inlet, 3/8" ID hose size, 60 PSI air pressure, 4 CFM average air consumption.
FP-714 4" Angle Grinder
Specifications: 12,000 RPM free speed, weighs 4 lbs. 8.3/4" in length. 4" height, 1/4" air inlet. 90 PSI air pressure, 12 CFM air consumption.

FP-1051

190.80

FP-1020

FP-714

427.50

FP-716 7" Heavy Duty Angle Sander
This tool features a heavy duty motor for maximum speed when sanding or polishing. It has a built-in regulator for speed control and a fingertip throttle for ease of handling. Ball bearing construction throughout. Side handle is standard equipment and fits either left or right side. Includes a 7" sanding plate, locknut and wrench. Specifications: 4500 RPM free speed, 5/8"-11 spindle size. 4.3/4 lbs. 12.3/4" in length, 4" in height. 1/4" air inlet, 3/8" ID recommended hose size. 90 PSI air pressure, 16 CFM average air consumption.
FP-889 6" Dual Action Sander
Specifications: 10,000 RPM free speed, 5/16"-24 spindle size, 3/16" orbital stroke, 4.1/2 lbs., 10" length, 5.1/8" height, 1/4" air inlet, 3/8" ID hose size, 60 PSI air pressure, 4 CFM average air consumption, 6" PART#1-FLO PRICE paper size, 6" FP-889 96.00 pad/plate size.
FP-707 7" Angle Grinder

FP-707

665.44

0.9 HP motor for extra stall resistance Safety lock-off throttle Governor controlled to maintain speed unreduced vibration Best for: Heavy grinding and MRO applications der load 1.3 HP motor for added stall resistance Safety lock-off throttle One piece housing reduces maintenance costs Heavy duty air cooled spiral gears and double bearings for added durability Ergonomic composite grip for comfort and reduced vibration Exhaust silencing for added noise control Left or right hand assist handle positions Best for: Continuous use heavy duty surface preparation and material removal

UTAngle Grinder

1.7 HP Motor for added stall resistance Safety lock-off throttle One piece housing reduces maintenance costs Heavy duty air cooled spiral gears and double bearings for added durability Ergonomic composite grip for comfort and reduced vibration Dual exhaust silencing for added noise control Left or right hand assist handle positions Best for: Continuous use heavy duty surface preparation and material removal
2.5 HP motor for added stall resistance Safety lock-off throttle One piece housing reduces maintenance Heavy duty air cooled spiral gears and dou Ergonomic composite grip for comfort and Dual exhaust silencing for added noise con Left or right hand assist handle positions
Best for: Continuous use extra heavy duty surface preparation and material removal trol reduced vibration ble bearings for added durability costs
Heavy duty spiral gears for reliability Ergonomic composite grip for comfort and

1-FLO-UT-8780

1-FLO-UT-8785-5

472.50

1-FLO-UT-8766

661.50

1-FLO-UT8766-25

778.50

- 1418 -

One Year Warranty

Specifications: 16,000 RPM free speed, 3/4" x 20.1/2" belt size. Belt speed is 1100m, 44"mn. Weighs 3 lbs., 18.1/2" length x 3" width, 1/4" NPT air inlet. 18.4 cu ft. air consumption. Noise level 80 DB.
UT-8703 Swivel Action 3/4" x 20.1/2" Belt Sander
UT-8702 Swivel Action 3/8" x 13" Belt Sander
Specifications: 16,000 RPM free speed. 3/8" x 13" belt size, belt speed is 1100m, 44"mn. Weighs 1.2/3 lbs. 11" length x 3" width. 1/4" NPT air inlet. 14 cu ft. air consumption, noise level 85 DB.

UT-8862 Hand Air File

Reciprocating air file makes filing in confined spaces easy. Includes flat, round, triangular and bastard files. 1/4" stroke length makes quick work of metal removal. Specifications: Weighs 2.1/4 lbs., 7" in length. 1/4" air inlet. 3/8" ID hose size. 60 PSI recommended air pressure. 4 CFM average air consumption.

when working on titanium and other exotic materials. 3/4 wide x 18 long belts.

20.1/2 Long Belt Model

Model 40326
5/8 or 3/4 wide abrasive belts. (11287 is only arm that accepts 20.1/2 long belts.) All models: Air inlet thread: 1/4 NPT, Hose I.D. size: 3/8, Air pressure: 90 PSIG Specifications (for all models except 40381): Max SFPM=4,550, Weighs 2.5 lbs., 14.1/4 in length, 28 SCFM air consumption, Motor H.P.=.5, Motor RPM= 20,000 Specifications for model 40381: Max SFPM= 1,500, Weighs 2.8 lbs., 15.5 in length, 24 SFCM Air Consumption, Motor H.P.=.4, Motor RPM= 5,000
Includes 11287 Contact Arm (see next page) for
.3hp, 7, Rear Exhaust, Gearless model with 1/4 collet. New muffler design reduces noise level. 25,000 RPM. Specifications: Weighs 1.25 lbs., 8.1/2 in length, 1/4 air inlet, 1/4 hose size, 90 PSI air pressure, 19 SCFM air consumption.

PART #: 1-DYN52205

383.80

PART# 1-DYN

CONTACT ARM

BELT SIZE

1/2" X 24"

486.40

Dynaswivel Air Line Connectors

Dynafile Versatility Kit

TECH TIP
Dynafile II easily converts to a Die Grinder with optional 50010 Collet (1/4) or 50015 Collet (6mm). To convert to a Drill, order 53032 Chuck (1/4).
The Dynaswivel is a universal-joint that connects It improves tool maneuverability, minimizes operator Patented; works great on air tools or paint guns.
MODEL ABRASIVE BELT MAX CONTACT PART# PRICE SIZE SFPM ARM 1-DYNIncludes model 14000 Dynafile , five contact arms and abrasives in carrying case. Specifications: Contact arms included 11213, 11216, 11218, 11219 and 11231. (See following Page) 40320 1/4-3/4 W X 18 L 40326 1/4-3/4 W X 20.1/2 L 40335 1/4-3/4 W X 18 L 40381 1/4-3/4 W X 18 L 11203 11206
476.90 496.85 476.90 614.65
portable air tools to an air line. fatigue and extends hose life.

Double Pivot

Swivels 360 at two pivot points

PART #: 1-DYN14010

609.90
Dynafile II Versatility Kit
allowing the air hose to drop directly to the floor while providing superb tool handling.
Double Pivot, Flow Control

Swivels 360 at two pivot

Model 15003 Mini-Dynafile II
points allowing the air hose to drop directly to the floor while providing superb tool handling. Finger-tip air-flow control dial.
Non-Marring Composite Construction
THREAD FLOW AIR FLOW PART# SIZE CONTROL RANGE SCFM 1-DYN

* With cup wheel & sanding discs.
Foot Pedal Control for 500-15,000 RPM Speed Control

PART #

2-222-224

195.00

MINI BELT SANDERS
Rear exhaust directs air away from work Equipped with exhaust silencer for noise Built in regulator for positive speed control JSM-630 has dead handle for better control 360 head rotation provides versatility for every Belt tracking adjustment is conveniently located Sanding belt included
1/4 X 13 3/8 X 13 1/2 X 24 3/4 X 20.1/2 1.3/16 X 21.1/4
JSM-606 JSM-610 JSM-612 JSM-620 JSM-630
169.48 142.50 152.00 199.50 413.27

reduction

MODEL/STOCK NO: REPAIR KIT NO.: REBUILD KIT NO: FREE SPEED (RPM): BELT SIZE (IN.): HORSE POWER (HP): NOISE LEVEL (db): AIR INLET (NPT): AIR HOSE SIZE (ID): AIR PRESSURE (PSI): AIR CONSUMPTION (CFM): LENGTH FOLDED (IN.): MAXIMUM LENGTH (IN.): HEIGHT (IN.): NET WEIGHT (LBS.): SHIP WEIGHT (LBS.)
1-829-JSM-606 1-829-RPK-606 1-829-RBK-606 16,000 1/4 X 13 0.1/4 3/14.2 10.7/16 15.3/4 1.63/64 1.1/2 3
1-829-JSM-610 1-829-RPK-610 1-829-RBK-610 16,000 3/8 X 13 0.1/4 3/14.2 10.7/16 15.3/4 1.63/64 1.1/2 3
1-829-JSM-612 1-829-RPK-612 1-829-RBK-612 16,000 1/2 X 24 0.1/4 3/14.2 23.1/2 34.1/2 1.63/64 1.1/2 3
1-829-JSM-620 1-829-RPK-620 1-829-RBK-620 16,000 3/4 X 20.1/2 0.1/4 3/18.4 11.15/16 18.1/2 2.23/4
1-829-JSM-630 1-829-RPK-630 1-829-RBK-630 12,000 1.3/16 X 21.1/4 0.1/4 3/24 11.5/8 19.19/64 4.9/64 4.1/2 6

- 1428 -

TOP RATED POWER TOOLS

3/8" DRILL

VARIABLE SPEED REVERSIBLE
WHY SETTLE FOR ANYTHING LESS?

3/8" CORDLESS DRILL

REVERSIBLE
3/8" CORDLESS DRILL KIT

MODEL 6408

Capacities: Steel 3/8" Wood 1" No load speed 0-2500 RPM Amps (115V) 4.9 OAL 10.9/32" Net weight 3.1 lbs Shipping weight 4.0 lbs
VARIABLE SPEED REVERSIBLE MODEL 6176DW
Includes: Keyless chuck built-in battery & charger. Capacities: Steel & Wood 3/8 Wood screw #9 x 3/4 No load speed 600 RPM Battery 7.2 VDC Net weight: 2.1 lbs Shipping weight 3.0 lbs

Permits Operation Of 220 Volt 3 Phase Motors On 220 Volt Single Phase Current

H.P. RANGE PART# 8-435

1500 1600
Rotary Phase Converter At An Economy Price. Produces Continuous 3 Phase Power To 220 Volt 3 Phase Motors From 220 Volt Single Phase Current.
126.00 136.50 147.00 168.00 204.75 225.75
1/4 to 1/2 1/2 to to to to 7.1/2 7.1/2 to 10

30A 50A 75A 100A

7.1/2 10
8100-052 582.75 8100-053 677.25 8100-054 924.00 8100-055 1076.25

PART# 8-435

Your selection must be based on the largest motor to be operated. This converter is designed to operate total HP loads up to 2 times the nameplate rating.

ARCO 3-PHASE STATO-PHASE

2 YEAR WARRANTY
Designed to operate one motor of a

ARCO ROTO-PHASE

ROTARY TYPE PHASE CONVERTER ROTO-PHASE I STANDARD DUTY OPEN DRIP PROOF* SPECIFY 230 OR 460 VOLT
* Available also in totally enclosed

5 YEAR WARRANTY

Generates three phase power. Instant reversing cycles efficiently per Multi-speed motors operate equally Motors may be either Wye or Delta con No motor modification is required. Multiple motors operate from one unit. Numerous successful applications Specific models for CNC also available.

formed. well. nected.

medium load. Motor loads of 75-85% can be obtained with the Stato-Phase. Installation is quick and easy. Duty cycle of the motor should be limited. Provides current to all 3 leads of the motor. Also available in 460 volt.
fan cooled. Please inquire.
such as welders, computers, CNC, etc.
S1 S2 S3 S4 S5 S6 S7 S8 S9 S10 S11 S12 S13 S14 S15 S16

1/4 1/2 3/1.1/7.1/40 50

PART# 0-000

265 270

257.00 258.00 262.00 287.00 310.00 313.00 406.00 412.00 526.00 612.00 952.00 1558.00 1915.00 2329.00 2772.00 3462.00
REC. This unit is the recognized leader MODEL LARGEST H.P. PART# PRICE NO. MOTOR CAP. 0-000 and standard of quality, perfor568.00 MF 005 mance, dependability, and economy 716.00 MG 1.1/010 since 1964. All rotary and static 870.00 M 015 phase converters are usually 1152.00 A 020 graded, as a matter of custom, 1660.00 R 7.1/025 1960.00 a g a i ns t the s ta nda rd du ty B 030 2794.00 C 035 Roto-Phase I because of its leader3742.00 G 040 ship and reputation. Roto-Phase I is 4186.00 P 045 a general purpose multi-motor gen4442.00 PKT 050 erating system, operating a number 4969.00 PKO 055 of 3-phase motors having moderate 7383.00 K-2G 060 8303.00 Y-2P 065 starting torques. Where the largest 10176.00 L-2S 070 motor operated equals the HP rating 12454.00 W-3P 075 of the Roto-Phase all additional motors should be of lesser horsepower.

- 1434 -

SHOP TAP MACHINES
Shop-Tap is a machine for all general purpose tapping. It permits you to tap from very small taps up to large taps and virtually eliminates the danger of tap breakage due to worn taps. The Shop-Tap arm with lubricated for life, impregnated bushings at all swivel points, provides weightless operation and permits the operator to bring the tap to the hole with ease. Machines come complete with: Parallel arm with 57 reach Air preparation unit with mist lubricator, water trap, pressure gauge and regulator Air driven motor Quick change tooling adaptor Optional accessories available Model ST400B

MAXIMUM TOOLING TORQUE CAPACITY RANGE STYLE AT 90 PSI MILD ALUMISTEEL NUM
WF2 WF2 WF1 WF1 WF1 WFft. lbs. 7/8 Tap 1 Tap 22.5 ft. lbs. 3/4 Tap 7/8 Tap 14.5 ft. lbs. 5/8 Tap 11/16 Tap 7 ft. lbs. 7/16 Tap 9/16 Tap 5 ft. lbs. 3/8 Tap 7/16 Tap 3.5 ft. lbs. 1/4 Tap 3/8 Tap
UTM* Universal-Tap-Modular Arm UM80 Drive Module 80 RPM UM160 Drive Module 160 RPM UM250 Drive Module 250 RPM UM525 Drive Module 525 RPM UM725 Drive Module 725 RPM UM1000 Drive Module 1000 RPM

FOOT SHEARS

Ideal for precision shearing of Can also be used on alumi Two-way blade
mild steel up to 16 gauge
*When ordering a UTM Universal-Tap Modular, you must also order a Drive Module
num, brass, copper, lead, plastic and zinc configuration provides twice the cutting life bottom blade is 1-way 1 face relief

HYDRAULIC SHOP PRESSES

Upper blade is 2-way; 2 angle cutting edge;
For pressing, bending and straightening operations Easy-to-use, hand-operated with pressure gauge for direct pressure readings Tables raise and lower easily with use of hand crank on the 15, 35 and 60 ton models Side frames are open for inserting long material Fast setup ram extension screw Ram moves laterally for added versatility (15 and 35 ton models)
Standard Equipment Two bed plates and pump handles Straightness testing support uses centers or v-blocks on the 15, 35 and 60 ton models Auxiliary hand press (HP-60) Two speed ram (HP-60)
Part #: JETModel: Capacity (mild steel Ga): Shearing length Capacity (in): Back Gauge Capacity (in): Front Gauge Capacity (in): Overall Dimensions (LxWxH/in):
754652 FS-1652N 25.1/62.1/2 x 21.1/4 x 41.1/2

HAND SLITTING SHEARS

Capable of shearing sheet steel, steel bars and Replaceable high quality stainless steel blades
rods plus many non-metallic materials

331416

Part #: JETModel: Capacity (tons): Ram Diameter (in): Piston Stroke (in): Screw Stroke (in): Work Table (in): Lateral Movement (in): Vert Table Travel (in): Auxiliary Hand Press (lbs): Base Size (in): Height (in): Net Weight (lbs):
331416 HP-15A 15 2.1/2 4.1/2 3.1/8 24.3/4 x 7.1/2 10.3/16 22.3/16 33.7/8 x 29.1/431
331460 HP-5 5.1/44.1/2 x 8 29.1/2 1,000 43.1/2 x 55.1/1,570

115/230 115/230 230/1 3
WHEEL WEIGHT PART# DIA. 662 662E 673E 8250W 8252W
256.00 318.00 359.00 379.00 489.00 788.00 763.00
Grinder buffers supplied with 1 grinding wheel & 1 wire brush.

BUFFERS

1/3 3/4 3/4 1.1/2 1.1/2 1.1/2
Buffers meet OSHA regulations if metal wheel covers, exhaust duct and dust collectors are added to the installation. Price does not include GA20 Pedestal.
115 115/230 115/230 115/230 208-230/460 208-230/460

SHAFT DIA.

1/2 3/4 3/4 7/8 7/8 7/8
PART# 9111 332B 333B 410B 409B 412B
286.00 563.00 563.00 734.00 717.00 717.00
Specify voltage when ordering - supplied with magnetic starter.
CARBIDE GRINDER All units rated 1/2 H.P. - 60 H.Z., 3450 RPM

115 208-230/460

PART# 9-

1126.00 1126.00

110 *510 WHEELS AND ACCESSORIES FACE GRIT TYPE PART# 91.1/SILICON CARBIDE C61 1.1/SILICON CARBIDE C121 1.1/ALUMINUM OXIDE S46 1.1/ALUMINUM OXIDE S61 WHEEL DRESSER WITH DIAMOND NIB GA8 DIAMOND AND NIB FOR GA8 GA7
PRICE 101.00 101.00 100.44 100.44 111.00 67.00
Accomodates cup wheels 6" dia. 1.1/2" face; recessed 4" dia. 1" deep steel-backed 1.1/4" hole. * Supplied with three conductor cord and plug. GA8 Dresser accomodates Diamond Tool NIB. 7/16" Diameter 1" long.
DIAMOND WHEEL TOOL GRINDER
1/2 Horsepower 3450 RPM 60 Hertz

110 110

PART# 9*522 532

1266.00 1266.00

* Supplied with three conductor cord and plug.
GA16 Pedestal GA16 for 6", 7", 8" and 10" grinders. 1/4 H.P. through 1.1/2 H.P. buffers, belt grinders and carbide grinders. Ht. 32.7/8", Base 15.3/4" wide by 14" deep. Wt. 60 lbs.
GA14 Pedestal GA14 for 6", 7", 8" & 10" grinders. Carbide grinders & 1/2 thru 1.1/2 H.P. buffers. Formed Steel Height 34.1/2" Wt. 47 lbs.
GA20 Pedestal GA20 for 8", 10", 12" & 14" Grinders and 1 thru 10 H.P. Buffers. Height 30" Base 20" wide by 17" deep Wt. 125 lbs.
GA9S Lighted Type Eyeshield with On and Off Switch Pair U.L. approved GA9 Lighted Type Eyeshield Pair U.L. and C.S.A. approved. Fits Baldor grinders 6" thru 14" and many grinders of other makes. Accomodates 60 watt bulb. Wt. 6 lbs. GA11 Eyeshield, Pair Plexiglass size 6" x 4". Fits Baldor grinders 7" through 14" and many grinders of other makes. U.L. and C.S.A. approved. GA10 Eyeshield, Pair Plexiglass size 5" x 4". Fits Baldor 6" grinders. U.L. and C.S.A. approved.

PART# 9GA4 Tool Tray for GA20 Pedestal GA16 GA14 GA20 GA9S GA9 GA11 GA10 GA4 GA3 GA24
324.00 244.00 575.64 151.00 136.00 44.00 40.00 59.40 58.32 35.00
GA3 Water Pot For GA20 Pedestal
GA24 Water Pot Fits any grinder that has guard cover. Capacity 1.1/2 pts.

- 1437

Bass Tool & Supply, Inc. www.basstool.com cutting 14" CUT-OFF SAW easycast ironaction in steel and
3800 RPM for fast effi lightweight for easy AC/DC switch vise assembly holds stock
Houston FAX Toll Free (713) 682-1889 (713) 681-4931 800-442-0042 CARBIDE TOOL GRINDER Uses standard 6 x 1 x 1.1/4 plate mounted green silicon

(IMPORT)

powerful 13 AMP hi-tech
cient, clean cutting transporting
powerful 13 AMP hi-tech 2300 RPM for fast, effi-
securely at up to a 45" angle motor for easy cutting action in steel and cast iron cient, and clean cutting up to 9.3/8" greater cutting capacity
16" wheel diameter for solid gripvise holds stock AC/DC switch
carbide wheels; also takes diamond wheels. Adjustable light swings over either wheel. Precision built to do precise grinding - easy to operate. Vibration is virtually eliminated - armature dynamically balanced: wheel mount very close to oversize 04 ball-bearings; extra heavy 3/4" diameter shaft. Single phase grinder powered with capacitor run motor, no auxiliary moving parts - won't burn out even under repeated overloading. Protractor type tool support sets in slot of big 12 x 6.3/4 tool tables. Protractor at each end of grinder indicates angle (up to 45) of tiltable tool tables. Water pot with spout and faucet - can be mounted over either wheel on support provided on both guards; two large water pans. Shipping weight 110 lbs.

115V/1 PHASE

PART# 9-88

5080000

358.20

241.50

6 & 8 BENCH GRINDERS
6", 1/2-H.P. BENCH GRINDER U.L. Approved
110-volts, 60-cycles. 3450-RPM. Single phase. Direct drive motor 1/2HPT, no brushes or belts to adjust or replace. Permanently lubricated motor bearings.

PEDESTAL UTILITY STAND

For grinders, vises, motors. 31" high from the floor to the table. Includes base, column and table.
8", 3/4-H.P. BENCH GRINDER
115-volts. 60-cycles. 3450-RPM. Single phase. Grinding wheels 8 x 1 x 3/4. Base 9 x 6. Width 18". Height 12". Weight 49 lbs.

DUST COLLECTOR

Features
quick-connect collection bags with elastic band for easy installation - no straps required.
PART # Model Blower Wheel Diameter (in) Sound Rating @ 3 ft. 1-Hose Connection Dia. (in) 2-Hose Connection Dia. (in) Bag Diameter (in) Filter Bag/Canister Length (in) Collection Bag Length (in) Collection Bag Capacity (cu. ft.) Air Flow @ 4 (CFM) Particle Size Static Pressure (inch of water) Velocity @ 4 (FPM) Overall Dimensions (LxWxH/in) Motor (TEFC) Net Weight (lbs)
JET-708639 DC-1100A 11 70-80 dB 30 7.36 1,100 30-Micron 11.5 12,x 20 x 79 1.1/2HP, 1 Ph, 115/230V, Prewired 115V 115
INDUSTRIAL BENCH GRINDERS
UL Listed Totally enclosed, pre-lubri Heavy-duty

cated ball bearings

R u b b e r mo u n t s pr e v e n t
guarded toggle switch on 8" and 10" movement
STANDARD EQUIPMENT Cast iron wheel guards and dust vents One-piece quick adjusting spark guards Large eye shields with quick adjustment Adjustable tool rests Fine and coarse vitrified grinding wheels included

PART# JET-

577101

577102

577103

JET-708639

413.25
KALAMAZOO INDUSTRIES, INC.
2" BELT SANDER 1/2 HP
MODEL NUMBER JBG-6A JBG-8A JBG-10A SHAFT DIAMETER (in) 1/2 5/WHEEL DIAMETER 6 X 3/4 8XX 1 (in/dia.x W) WHEEL SPEED (RPM) 1725 WHEEL GRITS 36/60 36/60 24/46 MOTOR 1/2 HP, 1 Ph, 115V 1HP, 1Ph, 115 1.1/2HP, 1Ph, 115V OVERALL DIMENSIONS 18 X 8.1/2 X 10.1/X 10 X 12.1/2 24.1/2 X 13 X 12.1/4 (in/LxWxH) NET WEIGHT (lbs) 110 122.55 PRICE 170.05 341.05
COMBINATION GRINDER/SANDER
Two machines in one - versatile, economical. 7" bench grinder, 1/2 HP, 110 Volt, with a two-way belt sander use in vertical or horizontal position. Has 2" x 48" belt, tilt table, contact wheel, removable platen. 50 lbs.
4" ALL PURPOSE 1/2 HP BELT SANDER

MODEL S4S

4 x 36" Belt Use in vertical or 1/2 HP TEFC motor Easy opening side 50 lbs.

MODEL 2FSM

2 x 48" Belt Direct Drive 1/2 Tilt Table Full Hinged

HP Motor

horizontal position 1 PH
Guard for quick belt change 48 lbs.

door for belt change

PART# 2-002

BENCH SAW-SWIVEL VISE SAW-SWIVEL VISE-STEEL STAND SAW-CHAIN VISE-STEEL STAND SAW-SWIVEL VISE-STEEL STAND WITH TRAY TOP (WET)

170 190

1 PHASE PART# PRICE 2-001
K10B1 K10S1 K10SF1 K10SW1
835.00 984.00 1170.00 2795.00
3 PHASE PART# PRICE 2-001
K10B3 825.00 K10S3 974.00 K10SF3 1160.00 K10SW3 2795.00
354204 JDP-20VS-1 & JDP-20VS-3 Cast Iron Drilling Capacity (in): 1.1/2 Steel Drilling Capacity (in): 1.1/4 Cast Iron Tapping Capy (JDP-20VS-3 only): 3/4 Column Diameter (in): 4 Max. Distance Spindle to Column (in): 10 Spindle Travel (in): 6.1/2 Spindle Distance to Base (in): 39 Spindle Distance to Table (in): 28.1/2 Table Size (in): 22 x 19.1/2 Table Travel (in): 20 T-Slots, Number & Size (in): 2&5/8 T-Slots Centers (in): 8.7/8 Work table Capacity (lbs): 110 Spindle Taper: MT-3 Range of Spindle Speeds (JDP-20VS-1,RPM): 300-2,000 Range of Spindle Speeds (JDP-20VS-3,RPM): 200-2,000 Base Size (in): 26 x 19 Base Work Table (in): 13x15.1/2 Motor (JDP-20VS-1): 1.1/2HP, 1PH, 115/230V, Prewired 230V Motor (JDP-20VS-3): 3HP, 3 Ph, 2-speed 230V or 460V Only Overall Height (in): 69 Net Weight JDP-20VS-1/JDP-20VS-3 (lbs): 720/740
8x13 Wet Cutting Horizontal Band Saw
This saw is built to deliver fast, accurate cutting on all types of material. Heavy duty, rigid steel and cast iron construction of the head, and base provides full blade support and eliminates vibration and deflection. Hydraulic feed system Quick acting vise which allows angle cutting to 45 Oil bath, gear reduction power train & precision blade guides Automatic shut-off when cut is complete Recirculating coolant system Capacity: 8.1/2 round 8.1/2 x 13 rectangular
10x16 Horizontal Band Saw
Exclusive 6 contact point ball
bearing and carbide blade guides Dual guide arms on a precision dovetail for greater strength and accuracy Patented 3 jaw rapid acting vise for miter cuts Exclusive swivel control panel allows operator to run the machine from the front or the back. Variable speed drive system Hydraulic feed control Recirculating coolant system Easy top load blade changes Blade tension indicator Safe ergonomic design

Model 7020/7040

Model 7015
WIL-7015 8x13 Wet Metal-cutting Band Saw, 1.5HP, 1ph, 115/230V motor with hydraulic feed, 618 lbs.
WIL-7020 10x16 1.5HP,115/230V motor, 1PH, 900 lbs WIL-7040 2HP, 220/440V motor, 3PH, 900 lbs.

- 1439

Combination Wood/Metal Vertical Band Saws
Wiltons Combination Vertical Band saw is specially designed to effectively cut a variety of materials including wood, plastic, bakelite, composites, ferrous and non-ferrous metals. Versatile and dependable, this premier saw is capable of contour cutting, straight cutting and resawing. Cast Iron frame Solid, one-piece steel base for extra stability Mitre guage Dust chute 39 to 3300 SFPM (wood/metal model) 90 to 340 SFPM (vari-speed model)