Dual Xdmr7710 Manual
Dual Xdmr7710, size: 1.1 MB
In-dash unit, Full-DIN, 55 Watts x 4, Stereo
1.0 DIN chassis; Electronic motorized detachable face; Electronic volume, bass, treble, balance, fader; 55x4 peak power; Source audio memory; Rotary encoder control; Programmable turn-on volume; Multi-button power on; Keyless CD eject; iPlug interface cable; Black/white dot matrix type display; Selectable confirmation beep; Infrared remote control; 5 Selectable EQ curves - pop, jazz, classic, beat, rock; CD-R/CD-RW compatible; MP3/WMA encoded C-R/RW playback; High-speed audible track search; Ant... Read more [ Report abuse or wrong photo | Share your Dual Xdmr7710 photo ]
User reviews and opinions
|ondemor||9:36pm on Tuesday, October 26th, 2010|
|its ok not really pleased i ve had this unit about 3wks now and had problems getting the cd to eject the unit gets stuck and would not do anything|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
XM Ready Multimedia Receiver with Detach Face
An optional XM Satellite Radio Receiver may be connected to the XDMR7710. XM subscription is required for reception. For more information, visit XMs website at www.xmradio.com or call 1-877-XM-RADIO. Not available in Alaska or Hawaii.
Please read entire manual before installation. Before You Start Disconnect negative battery terminal. Consult a qualified technician for instructions. Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started Remove trim ring from unit, Remove 2 transit screws located on top of the unit. Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. Install mounting sleeve into opening, bending tabs to secure. Connect wiring harness and antenna. Consult a qualified technician if you are unsure. Certain vehicles may require an installation kit and/or wiring harness adapter (sold separately). Test for correct operation and slide into mounting sleeve to secure. Snap trim ring into place. Mount the iplug adapter to any smooth clean surface using the supplied double-sided tape or #2 x 3/8 Phillips head screws.
TYPICAL FRONT-LOAD DIN MOUNTING METHOD
When replacing the fuse, make sure new fuse is the correct type and amperage. Using an incorrect fuse could damage the radio. The XDMR7710 uses one 10 amp ATM fuse located beside the wiring connector.
Control Locations - Receiver
EQ Mode/Search Display Preset #2/Random Preset #1/Repeat Open Volume Eject Preset #6/Menu *Key/Preset #7/Return Tune/Track Down Folder Up AS/PS/Enter/Function Tune/Track Up
Folder Down *Key/Preset #8/Tuner Scan *Key/Preset #9 *Key #0/Preset #10 Band/Play/Pause/Scroll Infrared Sensor Power Preset #5 Preset #4 Preset #3/Intro Reset Audio/Setup Record
*Function keys 7, 8, 9 and 0 apply to XM Radio and MP3/WMA operation only.
Control Locations - Remote
Power Volume Up AS/PS/Enter/Function Audio/Setup Tune/Track Up *Key #0/Preset #10 Volume Down Preset #3/Intro Preset #2/Random Preset #6/Menu
*Key/Preset #9 *Key/Preset #8/Tuner Scan *Key/Preset #7/Return Preset #5 Preset #4 Preset #1/Repeat Mode/Search Tune/Track Down Band/Play/Pause/Scroll
Front Panel Note: The front panel is semi-permanently attached during assembly. Please refer to the separate yellow instructions (before installation) to make the front panel removable. With the unit off, press OPEN to allow the front panel to slide down. Gently squeeze the release tab located on the bottom center underside and pull front panel down and away from unit to remove. To install, insert left side first, then push right side to secure. Press POWER or any other button (except EJECT or OPEN) to turn the unit on. Inserting a disc will turn the unit on automatically. Press POWER to turn the unit off. Press MODE to select between AM/FM, *XM Radio, CD player and auxiliary input. Modes of operation are indicated in the display. *Optional XM Satellite Radio Receiver and subscription required for XM Radio operation. Adjust volume using rotary encoder (00-46). Press and hold POWER for 3 seconds to program currently selected volume level. "P-VOL" and the current volume level will momentarily appear in the display. Press EQ to select between POP, JAZZ, CLASSIC, BEAT, ROCK and OFF (default) equalization curves. Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected). When in AM/FM, CD or AUX mode: Press DISP to select between clock and radio frequency (tuner mode), clock and CD elapsed time/track (CD mode), or clock and AUX (AUX mode). When in XM Radio mode: Press DISP to select between channel name, artist name, song title or clock. Set the Clock With the unit on, press and hold DISP until the clock begins to flash, then release. Press TUNE to adjust the hours and TUNE to adjust the minutes. Press DISP momentarily to save the selected time.
Front Panel Removal
Volume Programmable Turn-On Volume Preset EQ Curves
General Operation - Setup Menu
12/24-hour Clock The clock will display 12-hour AM/PM time in USA frequency spacing mode (PM 10:00). In European frequency spacing mode, the clock will display 24-hour time (22:00). Press and hold SETUP for more than 3 seconds to access the setup menu. Press SETUP momentarily to select between the menu functions and rotate the rotary encoder left/right to adjust or activate the desired function. Action Disables the loudness function. Enables the loudness function. Activating this feature will enhance the bass and treble frequencies when listening to music at low volumes. Radio frequency (tuner mode), XM information (XM mode), CD elapsed time/track or MP3/WMA file information (CD mode) or AUX (AUX mode) will be displayed by default. Clock is accessed by pressing DISP momentarily. Clock will be displayed by default. Radio frequency (tuner mode), XM information (XM mode), CD elapsed time/track or MP3/WMA file information (CD mode) is accessed by pressing DISP momentarily. Programs the unit to USA tuner spacing. (200kHz for FM and 10kHz for AM) Programs the unit to European tuner spacing. (50kHz for FM and 9kHz for AM) Programs the unit to not display the clock when the power is off. Programs the unit to display the clock when the power is off. Enables access to auxiliary mode. Disables access to auxiliary mode. Disables the confirmation beep. Enables the confirmation beep. Activates Distance tuning. Activates Local tuning for strong station reception only.
Menu Function Loudness Curve
Options LOUD OFF LOUD ON
Clock Display Priority
Tuner Frequency FREQ USA Spacing FREQ EUR Clock Display CLK OFF CLK ON Auxiliary Mode Beep Confirmation Local/Distance Tuning AUX ON AUX OFF BEEP OFF BEEP ON LOC OFF LOC ON
Audio Press AUDIO momentarily to select between Volume (default), Bass, Treble, Balance, & Fader.
VOLUME BASS TREBLE BALANCE FADER
Bass Treble Balance
Press AUDIO until BAS appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Press AUDIO until TRE appears then rotate encoder left/right to adjust ( -6 minimum / +6 maximum). Press AUDIO until BAL appears then rotate encoder left/right to adjust (BAL L 12-BAL 00-BAL R 12). BAL 00 represents equal balance Press AUDIO until FAD appears then rotate encoder left/right to adjust (FAD F 12-FAD 00-FAD R 12). FAD 00 represents equal fader Individual Bass and Treble settings are retained in memory for AM, FM, CD, XM, and AUX modes. This allows you to save the Bass and Treble settings separately for each mode. Note: Any adjustment to the Bass or Treble settings automatically cancels the current EQ curve (if one is selected).
Source Audio Memory
Press RESET upon initial installation or if abnormal operation occurs. Refer to page 4 for the reset button location. This feature is available when used with the EAUSB20 Media Link Adapter (sold separately). This feature is available when used with the EAUSB20 Media Link Adapter (sold separately). This feature is available when used with the EAUSB20 Media Link Adapter (sold separately).
Record Menu Return
Seek Tuning Manual Tuning
AM/FM Tuner Operation Press TUNE nn or TUNE ll momentarily to seek the next strong station.
Press TUNE or TUNE for more than 2 seconds, then release. "MANUAL" will momentarily appear in the display. Press TUNE or TUNE momentarily to move radio frequency up or down one step at a time. Press and hold to advance quickly. If tuning is not adjusted for 5 seconds, the unit will return to seek tuning mode (default). "AUTO" will momentarily appear in the display.
Scan Tuning Band Storing and Recalling Station Presets
Press SCN to preview strong stations on the current band, pausing for 5 seconds at each. Press SCN again to cancel. Press BAND to select between FM1, FM2, FM3, AM1 and AM2 bands. Up to 18 FM stations and 12 AM stations can be stored. To store a station, select the desired band and station. Press and hold the desired preset button (1-6) for more than 2 seconds. When stored, the preset number will appear in the display. The station can be recalled anytime by pressing the corresponding preset button. Note: Function keys 7, 8, 9 and 0 apply to XM Radio and MP3/WMA operation only.
Automatically Store Stations Preset Scan
Press AS/PS for more than 2 seconds to automatically store the six strongest stations in the current band. Automatic Local tuning is activated during the initial band scan. Press AS/PS for less than 2 seconds to scan presets 1-6 on the current band, pausing for 5 seconds at each. Press AS/PS again to cancel.
XM Radio Activation
Activating Your XM Receiver (when connected) 1. Press MODE to select XM Radio. 2. Verify channel 1 (XM Preview Channel) is playing. 3. Select Channel 0. The XM receivers eight character Radio ID number will appear on the XDMR7710 display. The Radio ID number is also located on the XM receiver unit (sold separately). 4. Record the number here for future reference:
5. Activate your XM Satellite Radio service. To subscribe, log onto http://www.xmradio.com/activation or call 1-800-967-2346. Note: You will need to keep your XDMR7710 turned on for at least one hour after requesting activation to receive the full channel line-up.
XM Radio Operation
Tuning Modes Basic Channel Selection Direct Channel Selection Press BAND to select between XM DIRECT, XM1 and XM2 bands. Press TUNE or TUNE momentarily to select the next available channel. Press and hold to advance quickly. Press BAND to select XM DIRECT channel entry band. DIRECT will momentarily appear in the display. Enter the desired channel using buttons 1-0, then press FUNC for 3 seconds to confirm the selected channel. If the channel is not available, the current channel will be retained. Press FUNC once to display the category of the currently selected channel for 10 seconds. The CATEGORY icon will appear on the display.
Channel Search by Category Press FUNC once, the CATEGORY icon will appear on the display. Press or to choose a different category, then press TUNE or TUNE to choose a channel within that category. Press FUNC for 3 seconds to select the desired channel. If you do not select a channel, the channel search will time out after several seconds and the current channel will be retained.
Channel Search by Name
Press FUNC twice, the SEARCH icon will appear on the display. Use the rotary encoder to select the desired alphanumeric channel name. Press to enter each character or to clear the entry. Press FUNC for more than 3 seconds to begin the channel name search. Press TUNE or TUNE to review the channel search results. Press FUNC for 3 seconds to select the desired channel. If you do not select a channel, the channel search will time out after several seconds and the current channel will be retained. If the search results are not valid, NOTFOUND will momentarily appear on the display and current channel will be retained.
Storing and Recalling Preset Channels
Up to 20 XM channels can be stored. To store a channel, select XM1 or XM2 band and the desired channel. Press and hold the desired preset button (1-0) for more than 2 seconds. When stored, the preset number will momentarily appear in the display. The channel can be recalled anytime by pressing the corresponding preset button. Note: Presets 7, 8, 9 and 0 apply to XM Radio operation only.
Press DISP to select between the following display options:
The selected display option will be retained in memory (when changing channels for instance). Text Scrolling Press BAND for more than 3 seconds to activate continuous text scrolling. The current channel name, artist name or song title will scroll continuously (if more than 8 characters). Press BAND for more than 3 seconds again to cancel continuous text scrolling. 11
CD Player Operation
Insert CD Eject CD With the label facing up, insert a standard size CD into the CD slot. The CD will automatically begin playback. Press EJECT to eject the CD. The unit will change to previous mode of operation (AM, FM, XM, or auxiliary input). If the disc is not removed within 10 seconds, the unit will reload the disc. The unit does not have to be turned on to eject CD. Press TRACK to skip to the beginning of the next track. Press TRACK to return to the beginning of the current track. Pressing TRACK again skips to the beginning of the previous track.
Fast Forward and Reverse Pause Scan Repeat Random
Press and hold TRACK or reverse a track. Press Press
ll or TRACK nn to fast forward
l// II to temporarily stop CD playback. l II again to resume playback.
Press INT to play the first 10 seconds of each track. Press INT again to cancel. Press RPT to continuously repeat selected track. Press RPT again to cancel. Press RDM to play all tracks in random order. Press RDM again to cancel. Random mode is retained in memory when selecting between AM/FM tuner, XM Radio, CD player and auxiliary input modes and when the unit is turned on/off. Some CD-Rs and CD-RWs may be incompatible with this unit, depending on media type and recording method. In addition, the following CDs may be incompatible with this unit: CDs exposed to extreme temperatures or direct sunlight for extended periods of time, CDs recorded in which a recording session failed or a re-recording was attempted and, or encrypted or copy-protected CDs which do not conform to the audio CD-DA red book recording standard.
CD Player Operation - MP3/WMA Files
Playing an MP3/WMA Disc When an MP3/WMA encoded disc is first inserted, READING will appear in the display. Depending on the number of files and folders, this may take several seconds. The icon will illuminate anytime a valid MP3 encoded disc is inserted and flash in MP3 search/navigate modes. The icon will illuminate anytime a valid WMA encoded disc is inserted and flash in WMA search/navigate modes. The icon will illuminate anytime a folder is selected in the file/folder search modes. Press DISP to select between track number/elapsed time (default), clock, track name, directory name, title, artist, album, year and comment. NO ID3 TAG will be displayed if the MP3 file contains no ID3 tag information. UNKNOWN will be displayed if the WMA file contains no WMA tag information. ROOT will be displayed if the directory name of a root folder is not labeled. Character Support Maximum character display information Track name 32 character maximum Directory name 32 character maximum *Song title 30 character maximum *Artist name 30 character maximum *Album name 30 character maximum *Year 4 character maximum *Comment 28 character maximum *Song title, Artist Name, Album name, Year and Comment will only be displayed if included with the MP3/WMA file. When referring to MP3/WMA playback, the following terms are synonymous: File name and track name Folder name and directory name 13
MP3 Icon WMA Icon Folder Icon Displaying Information
Refer to the following button function table when selecting, searching or navigating MP3/WMA files and folders:
MP3/WMA Button Function Table
SEARCH Preset #1 Preset #2 Preset #3 Preset #4 Preset #5 Preset #6 Key #7 Key #8 Key #9 Key #0 AUDIO Rotary Encoder
Direct Select, Search and Navigate Modes Enter/Confirm A, B, C, 1 D, E, F, 2 G, H, I, 3 J, K, L, 4 M, N, O, 5 P, Q, R, 6 S, T, U, 7 V, W, X, 8 Y, Z, /, 9 -, _, +, 0 Character Shift Character Select (A, B, C ~ 8, 9, 0)
Direct Select, Search and Navigate Modes
Press SEARCH for more than 3 seconds, to select between the following modes: Direct File Select Alphanumeric File or Folder Search File or Folder Navigate Press SEARCH for more than 3 seconds, then release. MP3 T " or WMA T will flash in the display. Use the buttons in the above table (3 keystroke maximum input), or the rotary encoder to enter the desired file number.
Direct File Select Step 1
Press to confirm the selected file number or wait for the input cycle to time out (approximately 5 seconds). If the file is not available, NO FILE will be displayed momentarily and the current file will continue to play.
Alphanumeric File or Folder Search Step 1 Press SEARCH for more than 3 seconds, then release. Press SEARCH again, an " " will flash in the display. Use the buttons in the table on page 14 (32 character maximum input) or the rotary encoder to enter the desired alphanumeric search characters. Press AUDIO to advance one character to the right.
Step 2 Step 3 Step 4
to initiate the selected alphanumeric search.
Turn the rotary encoder to preview the search results. If the search returns a folder, the icon will illuminate. Press to select the desired file or folder. If a folder is selected, "/ /" will be displayed. Turn the rotary encoder to the right to begin searching files in the folder. Press to select the desired file within the folder.
Note: If the file is not available, NO FILE will be displayed momentarily and the current file will continue to play. File/Folder Navigate Step 1 Press SEARCH for more than 3 seconds, then release. Press SEARCH again two times to navigate files/folders on the disc. The current folder name will scroll one time followed by available files and folders. Turn the rotary encoder to preview files/folders in the current folder. If a folder is selected, the icon will illuminate. Press to select the desired file or folder. If a folder is selected, "/ / " will be displayed. Turn the rotary encoder to the right to begin searching files in the folder. Press to select the desired file within the folder.
Step 4 *Folder Access (Up one level)
When navigating folders (and / / is displayed), press AUDIO to access the previous level (up one level). *Only available on MP3/WMA discs recorded with more than one folder.
Navigating Note After navigating by direct select, alphanumeric search or file/folder navigate modes, the track number and elapsed time will be displayed by default. Press DISP momentarily to select clock, track name, directory name, title, artist, album, year or comment. Press Press to select the previous folder. to select the next folder.
*Folder access is only available on MP3/WMA discs recorded with more than one folder. File Repeat File Repeat (Current Folder Only) Press RPT momentarily to continuously repeat selected file. Press RPT again to cancel. Press RPT for more than 2 seconds to consecutively repeat all files in the current folder only. The icon will appear in the display when in folder repeat mode. Press RPT again to cancel. Press RDM momentarily to play all files on entire disc in random order. Press RDM again to cancel. Press RDM for more than 2 seconds to play all files in current folder only in random order. The icon will appear in the display when in folder random mode. Press RDM again to cancel. Press INT momentarily to play the first 10 seconds of each file on the entire MP3/WMA disc. Press INT again to cancel. Press INT for more than 2 seconds to play the first 10 seconds of each file in the current folder only. The icon will appear in the display when in folder intro mode. Press INT again to cancel. Note: File repeat (current folder only), folder random and folder intro is only available on MP3/WMA discs recorded with more than one folder.
Disc Random Folder Random
Disc Intro Folder Intro
Media Compatibility The following types of discs/files are compatible: CD-ROM (ISO), CD-R, CD-RW CD-DA MP3 data WMA data The following types of discs/files are not compatible: WMA files that are protected by DRM (Digital Rights Management). WMA lossless format Discs recorded with Track At Once or packet writing MP3 PRO format MP3 playlists WAV format Playback Order MP3/WMA playback sequence is based on recorded order of files and begins in the root folder of the disc. Any empty folders or folders that do not include MP3/WMA files are skipped. This unit may not play files in the order they were recorded in. Refer to your recording softwares users manual for more information. ISO9660 level 1 ISO9660 level 2 Yellow Book MODE 1 Yellow Book MODE 2 FORM 1 Multi session Maximum folders and files - 256 Maximum folder levels - 8 MPEG-1/2/2.5 Audio Layer-3 ISO9660 standards: Maximum nested folder depth is 8 (including the root folder). Valid characters for folder/file names are letters A-Z (all caps), numbers 0-9, and _ (underscore). Some characters may not be displayed correctly, depending on the character type. This device can play back discs in Joliet, Romeo, and other standards that conform to ISO9660. MP3/WMA written in the formats other than the above may not play and/or their file names or folder names may not be displayed properly. 17
Compatible Recording Formats
Additional MP3/WMA Information An internal buffer provides ESP (Electronic Skip Protection) to virtually eliminate skipping. When playing a disc recorded with regular audio files (CD-DA or.WAV) and MP3/WMA files, the unit will play the MP3/WMA files only. Only MP3 files with filename extension (.mp3) can be played. Only WMA files with filename extension (.wma) can be played. Do not attempt to play discs which contain non-MP3/WMA files with the MP3/WMA extension. Sampling Frequency Rates MP3 WMA Transfer Bit rates MP3 WMA
8kHz ~ 48kHz 32kHz ~ 48kHz
8kbps ~ 320kbps constant Variable bit rates 32kbps ~ 192kbps constant Variable bit rates Note: Some files may not play or be displayed correctly, depending on sampling rates and bit rates.
MP3 Tag Display Recommended Settings
ID3 tags Version 1.x This model will not display ID3 Version 2.0 or greater tags. For best results, use the following settings when burning an MP3 disc: 128kbps or higher constant bit rate 44.1kHz or higher sampling frequency For best results, use the following settings when burning a WMA disc: 64kbps or higher constant bit rate 32kHz or higher sampling frequency
Limited One Year Warranty
This warranty gives you specific legal rights. You may also have other rights which vary from state to state. Dual Electronics Corp. warrants this product to the original purchaser to be free from defects in material and workmanship for a period of one year from the date of the original purchase. Dual Electronics Corp. agrees, at our option, during the warranty period, to repair any defect in material or workmanship or to furnish an equal new, renewed or comparable product (whichever is deemed necessary) in exchange without charges, subject to verification of the defect or malfunction and proof of the date of purchase. Subsequent replacement products are warranted for the balance of the original warranty period. Who is covered? This warranty is extended to the original retail purchaser for products purchased and used in the U.S.A. What is covered? This warranty covers all defects in material and workmanship in this product. The following are not covered: installation/removal costs, damage resulting from accident, misuse, abuse, neglect, product modification, improper installation, incorrect line voltage, unauthorized repair or failure to follow instructions supplied with the product, or damage occurring during return shipment of the product. What to do? 1. Before you call for service, check the troubleshooting guide in your owners manual. A slight adjustment of any custom controls may save you a service call. 2. If you require service during the warranty period, you must carefully pack the product (preferably in the original package) and ship it by prepaid transportation with a copy of the original receipt from the retailer to an authorized service center. 3. Please describe your problem in writing and include your name, a return UPS shipping address (P.O. Box not acceptable), and a daytime phone number with your shipment. 4. For more information and for the location of the nearest authorized service center please contact us by one of the following methods: Call us toll-free at 1-866-382-5476 E-mail us at firstname.lastname@example.org Exclusion of Certain Damages: This warranty is exclusive and in lieu of any and all other warranties, expressed or implied, including without limitation the implied warranties of merchantability and fitness for a particular purpose and any obligation, liability, right, claim or remedy in contract or tort, whether or not arising from the companys negligence, actual or imputed. No person or representative is authorized to assume for the company any other liability in connection with the sale of this product. In no event shall the company be liable for indirect, incidental or consequential damages.
CD Player Frequency response: 10Hz-20kHz Channel separation @ 1kHz: >65dB D/A converter: 1 Bit Tuning range: 87.5MHz-107.9MHz Usable sensitivity: 8.5dBf 50dB quieting sensitivity: 10dBf Stereo separation @ 1kHz: 40dB Frequency response: 30Hz-13kHz Tuning range: 530kHz-1710kHz Usable sensitivity: 22uV Frequency response: 30Hz-2.2kHz Operating voltage: 11-16 VDC, negative ground Speaker output impedance: 4~8 ohms Line output voltage: 2 Volts Dimensions: 7" x 7" x 2" (178 x 178 x 51 mm)
Design and specifications subject to change without notice.
CEA-2006 Power Standard Specifications
(reference: 14.4VDC +/- 0.2V, 20Hz~20kHz)
Power Output: 17 Watts RMS x 4 channels at 4 ohms and < 1% THD+N Signal to Noise Ratio: 80dBA (reference: 1 watt into 4 ohms)
Troubleshooting - General
Unit will not turn on (no power)
Yellow wire not connected or incorrect voltage Check connections for proper voltage (11~16VDC) Red wire not connected or incorrect voltage Black wire not connected Fuse blown Check connection to ground Replace fuse Check connections at speakers Insulate all bare speaker wires from each other and chassis ground Check for pinched wire Check for pinched wire Use fuse with correct rating Check mounting sleeve and backstrap support Press eject or RESET Press eject or RESET Press eject or RESET Press eject or RESET Write disc using WMA files that are not copy-protected Repeat search using valid parameters Write disc using valid audio files with.mp3 or.wma file extensions Press EJECT for 3 seconds to reset CD mechanism position Remove 2 transit screws located on top of the unit
Unit has power (but no sound) Unit blows fuses
Speaker wires not connected One or more speaker wires touching each other or touching chassis ground Yellow or red wire touching chassis ground Speaker wires touching chassis ground Incorrect fuse rating
Unit is not mounted correctly or backstrap is not secure Disc read error Focus error or disc is in upside down FAT error MP3/WMA decode error The WMA file is copy-protected by DRM (Digital Rights Management) Selected file is not available in direct or alphanumeric search modes The file format is incompatible CD mechanism position out of alignment CD transit screws still in place
Physical defect in media (CD, CD-R or CD-RW) Check media for scratches ERROR-01 appears on display ERROR-02 appears on display ERROR-03 appears on display ERROR-04 appears on display PROTECT appears on display NO FILE appears on display INVALID appears on display Unit will not accept a disc
Troubleshooting - XM Radio
You can not receive any XM channels You can not tune into a specific XM channel NO SIGNL appears on display
Your XM Radio receiver is not activated You may not be authorized to receive that channel The XM signal is blocked
Contact XM as described on page 10 Verify your subscription with XM Contact XM as described on page 10 Move vehicle from obstructed area (such as inside a tunnel or a garage)
This message may appear when driving inside Make sure the antenna has a clear view a tunnel or under obstacles of the sky ANTENNA appears on display The XM antenna is not connected The antenna cable is damaged Check XM antenna connection Check for pinched or cut antenna cable Try another channel This condition is normal, there is nothing wrong with your receiver
OFF AIR appears on The selected channel is not in service display No song title or artist name This information may not be available for is displayed some music channels, news channels, or when there is no song playing
Dual Electronics Corp. Toll Free: 1-866-382-5476
www.dualav.com 2006 Dual Electronics Corp. All rights reserved. Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and or other countries. The XM name and related logos are trademarks of XM Satellite Radio Inc. NSA0506-V01
sub systems re c e i v e r s c o m b o pa c k s
m a r i n e a u d i o c o m b o pa c k s s p e a k e r s
FV12DVC IP35WG MARINE MP3 ADAPTER
1000W H A N D L I N G
MOBILE AUDIO & VIDEO | HOME AUDIO NAVIGATION | MARINE AUDIO
MXCP45 XNBP12D XOBP12D MWR30
WIRED MARINE REMOTE Control MXDM70 - mxdma80 COMPATIBLE
Am/FM/CD COMBO PACK
Am/FM/CASSETTE COMBO PACK
30W PEAK 6" x 9" MARINE SPEAKERS 200W PEAK
800W H A N D L I N G
12" DUAL BANDPASS SUBWOOFER
1100W H A N D L I N G
500W H A N D L I N G
SG1 & SG2
UNIVERSAL MARINE SPLASHGUARD
6.5" MARINE SPEAKERS
400W H A N D L I N G
15" DUAL BANDPASS SUBWOOFER
1200W H A N D L I N G
MAR16B/MAR16W MARINE ANTENNAS
6.5" 2-WAY ROCK SPEAKER
6.5" 2-WAY ROCK SPEAKER WITH AM/FM TUNER
XDVDN8290 MXDMA80 am/fm/cd/mp3/wma receiver 200W P E A K MXDM70 am/fm/cd/mp3/wma/wb receiver 200W P E A K
DVD MULTIMEDIA Receiver with 6.5" TFT/LCD MONITOR
PSW12 12" SUBWOOFER 270W PEAK MXDMA65 Am/FM/CD/MP3/WMA receiver 200W P E A K
PSW10 10" SUBWOOFER 220W PEAK L12SW 12" SUBWOOFER 270W PEAK L10SW 10" SUBWOOFER 270W PEAK
MXCP55 Am/FM/cd/wb COMBO PACK
200W P E A K
L8SW 8" SUBWOOFER MXD55 am/fm/cd/WB receiver
5.25" 2-WAY SPEAKER
LU63PB (black) LU63PW (white)
6.5" 3-WAY SPEAKERS
5.25" 3-WAY SPEAKERS
LU53PB (black) LU53PW (white) DC265CM (white)
Image Not Available
DVD MULTIMEDIA Receiver with 7" TFT/LCD MONITOR
DVD MULTIMEDIA Receiver with 7" TFT/LCD display
6.5" 2-WAY SPEAKER
LU43PB (black) LU43PW (white)
4" 3-WAY SPEAKERS
DC365W (In-Wall) DC365C (In-Ceiling) DC265W (In-Wall) DC265C (In-Ceiling) 180W PEAK
6.5" 2-WAY SPEAKERS
MXDM51 am/fm/cd/mp3/wma receiver
MXCP51 Am/FM/CD/MP3/WMA COMBO PACK 200W P E A K
DVD MULTIMEDIA Receiver with 2.5" TFT/LCD display
CD MULTIMEDIA Receiver with 2.5" TFT/LCD display
PORTABLE DVD PLAYER TWIN 7 TFT LCD MONITORS
Dual Electronics Corporation 250 International Parkway, Suite 230 Heathrow, FL 32746 toll free: 866-626-7864 www.dualav.com A division of Namsung Corporation.
480 X 234 RESOLUTION
navigation m u lt i m e d i a r e c e i v e r s
r e c e i v e r s c o m b o pa c k s amps
amps mo b ile speakers
IP45 BTM60 XD7600 am/fm/cD receiver
220W P EAK
A/V INTERFACE CABLE
BLUETOOTH INTERFACE MODULE
DMC693 IP35 XDMA6700
UNIVERSAL BLUETOOTH SPEAKERPHONE AUDIO INTERFACE CABLE
6" X 9" 3-WAY SPEAKERS
140W HANDLING 5.25" 3-Way speakers 135W HANDLING
PORTABLE GPS NAVIGATION SYSTEM
1GB SD MEMORY CARD
UNIVERSAL MULTIMEDIA CONTROLLER
XDM7510 am/fm/cd/mp3/wma receiver
AM/FM/MP3/WMA RECEIVER WITH iPOD & BLUETOOTH
XDM6400 AM/FM/CD/MP3/wma RECEIVER 200W PEAK XNAV3550 XDMA6855 am/fm/cd/mp3/wma receiver
1GB SD MEMORY C ARD
INSTALLED GPS NAVIGATION SYSTEM
6" X 9" 3-Way speakers
150W HANDLING 6.5" 3-Way speakers 140W HANDLING 5.25" 3-WAY SPEAKERS speakers 135W HANDLING
240W P E A K
20GB HARD DRIVE
XDMR6850 am/fm/cd/XM/mp3/wma receiver 200W PEAK XD622W AM/FM/CD/WB RECEIVER 208W PEAK CP6460W XDMA7715 am/fm/cd/mp3/wma receiver 200W P E A K XDM6830 am/fm/cd/mp3/wma receiver
200W P E AK
AM/FM/CD/WB COMBO PACK
6" X 9" 4-WAY speakers
6.5" 4-WAY speakers
5.25" 4-Way speakers
AM/FM/CD COMBO PACK
XD6320 AM/FM/CD RECEIVER 200W PEAK
6.5" 3-Way speakers
5" x 7" / 6" x 8" 3-Way speakers
XDMR7710 am/fm/cd/XM/mp3/wma receiver 220W P E A K
XDM6825 am/fm/cd/mp3/wma receiver 200W P E AK
XIA5600 XD5220 AM/FM/CD RECEIVER 120W PEAK
2/1 Channel amplifier with die-cast aluminum heatsink 1000W
2/1 Channel amplifier with die-cast aluminum heatsink 800W
2/1 Channel amplifier with die-cast aluminum heatsink 580W
5.25" 2-WAY speakers
4" 2-WAY SPEAKERS
6" X 9" 2-WAY SPEAKERS
XDMR7700 am/fm/cd/XM/mp3/wma receiver 220W P E A K
XDMA690 am/fm/cd/mp3/wma receiver 200W P E AK
XD5120 AM/FM/CD RECEIVER 100W PEAK XIA1000
XDM7610 am/fm/cd/mp3/wma receiver
220W P E A K
XDMP680 Am/FM/CD/MP3/WMA receiver 200W P E AK
XC4100 AM/FM/CASSETTE RECEIVER 30W PEAK
CLASS D DIGITAL MONO AMPLIFIER WITH DIE-CAST ALUMINUM 1000W HEATSINK
1 CHANNEL AMPLIFIER MOSFET POWER 600W SUPPLY
4/3/2 CHANNEL AMPLIFIER MOSFET POWER 600W SUPPLY
2/1 channel amplifier MOSFET power supply
6.5" 2-WAY speakers
1.0 DIN chassis; Electronic motorized detachable face; Electronic volume, bass, treble, balance, fader; 55x4 peak power; Source audio memory; Rotary encoder control; Programmable turn-on volume; Multi-button power on; Keyless CD eject; iPlug interface cable; Black/white dot matrix type display; Selectable confirmation beep; Infrared remote control; 5 Selectable EQ curves - pop, jazz, classic, beat, rock; CD-R/CD-RW compatible; MP3/WMA encoded C-R/RW playback; High-speed audible track search; Anti-shock mechanism; 3-Beam laser pickup; Displays ID3v1 tags; 30 Station presets (18 FM / 12 AM); Auto station store; Auto stereo/mono.
|Product Type||Radio / CD / MP3 player|
|Form Factor||Full-DIN - in-dash unit|
|Sound Output Mode||Stereo|
|Controls||Mute, volume, treble, bass, fader, balance, loudness|
|Max Output Power / Channel Qty||55 Watts x 4|
|Output Power / Total||220 Watt|
|Type||Radio tuner - AM/FM|
|Preset Station Qty||30 preset stations|
|AM Preset Station Qty||12 preset stations|
|FM Preset Station Qty||18|
|Type||CD / MP3 player|
|Form Factor||In-dash unit|
|Media Load Type||Slot-load|
|Supported Digital Audio Standards||WMA, MP3|
|Universal Product Identifiers|
|GTIN||00827204101612, 00689076450737, 00027204101616|
DVB-S2 S900 DPF-D82 20PT1553-00 RM4270L SCD-XA5400ES Starlet XRS R8 KNA-G520 UA-25EX RX-V520RDS WF-42P1 SDM-G96D Pathfinder-2005 Disto D3 Wire Harness XE4500 SL620 Rotak 37 I815E Detector - 2004 DSC-L1 GL350 TF-TV505 Wiring Diagram 31340-8 Fifa 2001 Aconda 9272 TA-DA7000ES X1260 WD-1255RD Servers Wiring Harness Stories RV-B55 VL420 All-IN-ONE 931MP MD 9570 XR-P770F 250 XC-F Tntsat Series 8 ASD-51W Laserjet 4550 Harness EOS 20DA Blazer12 PC-1500 REX RJ10 BV8965B I30CW Barracuda The Deep TF-DVD7500 Subwoofer KXR 100 HD321KJ-jp1 D7 2CX Wiring Wixxl126 Pavilion 9700 T6550 TLU-42643B 250-2002 Aspire 1690 Ellipse 3OO MS7090S AR-407 UE-37C5100QW PSC 1110 26LG30-UA Eyebox NC8430 MFC-420CN CCD-TR718E SC-HT730 Reviews TX-29PM1P SPA2600 VP211B Dmix-600 SCX-4220 Car Audio SLV-D900E Edius Linn LK2 RHT398H SR-S2028DVW CS-E9CKP SEB 324 HD 755 CU-VD40 BCD-210WN MXD-D40 Ferrari-3400 Cyrus 6 At EX Z-6100 SO1542A KV-21FX20B 32PF9967D-10 Superplexus PG-M20X XV-5080 WK-1600 KH 5510
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101