The video shows how to make the set up of the DSP Studio 2 software on Windows. Adjust even the finest details of Amate Audio's ...
Still learning this DSP. From what ive heard. Its epic! does sound really really good. Sound quality is exilent. Has built in limiters ...
USB HID bootloader for mikroMMB for PIC32
1. Establish USB link
2. Connect with MCU
This is a short manual that describes the operation of mikroBootloader application. You will find that five simple steps are all it takes to successfully load your new program into the MCU.
You should know this before you start
USB HID Bootloader v184.108.40.206 application may only be used with the appropriate device USB HID Bootloader firmware version 220.127.116.11, which is free of charge and can be downloaded from mikroElektronika's website. Bootloader uses USB HID class connection, and no additional OS drivers are required for proper operation.
Connect your board to your PC. When device is recognized by your OS the gray USB icon will turn red, indicating that USB link is succesfully established. You have 5s to procede to the next step. If you wait too long the device will disconnect.
Click on the Connect button within 5s. The chip automatically ...