For further information on Dyson visit www.barbourproductsearch.info

TECHNICAL SPECIFICATION

Electrical Input voltage: 230-240V AC, single phase 50 Hz Rated power: 1600 W Motor type: Dyson digital motor. Switched reluctance brushless Motor speed: 88,000 rpm Heater type: None Standby power consumption: 1 W Energy consumption per dry: 0.0044 kWh Construction Polycarbonate-ABS casing with homogenous antimicrobial additive in all external surfaces Colour finish: Metallic steel finish PC-ABS Anti-microbially impregnated external plastics and seals Galvanised steel back plate / mounting bracket Tamper-proof T30 type exterior screws Water ingress protection to IPX5 Filtration Lifetime anti-microbial HEPA H12 filter Particulate removal tested to 99.5% at 0.15 MPPS according to EN1822 Bacteria removal 99.9% Operation Touch-free infra-red activation Hand dry time: 10 seconds (measured to method defined by National Sanitation Foundation protocol P.335) Operation lock-out period: 30 seconds Airspeed at nozzle: 400 mph Operating airflow: 37 l/s Rated operating noise power: 85 dB(A) Logistics Serial number prefix: A03 Single unit order code: 14977-01 Unit weight: 10 kg Packaged weight: 13 kg Packaged dimensions: 310 mm 5 Pallet count: 13 Pallet type: UK (1200 x 1000 mm) Unit barcode: 5025155007853

Rear Elevation

Mounting Bracket (including 2 fixings)

Cable entry point

45 307

Fixing locations (4)

See table for recommended mounting heights

Floor Side Elevation

164 102
Standard warranty 5 year (or 350,000 uses) parts, 1 year labour Product Certification BEAB approved to IEC/EN60335-1 and IEC/EN60335-2-23 Compliant to EMC directive according to EN55014-1, EN55014-2, 79 EN61000-3-2, EN61000-3-3 Recommended installation Male Female heights measured from floor x To top of machine y To mounting bracket screw z To bottom of machine

291 663

Child or Disabled 875 mm 815 mm 212 mm
All dimensions shown in mm
Manufactured materials Plastic: ABS, PC/ABS, PC, PP (+ PPGF and PPTF), PET-TS Thermoset (BMC/DMC), PEEK Rubber: EPDM, SBR, NR (Nitrile Rubber) Metal: Stainless steel, galvanized steel, zinc diecast alloy brass Z 35 45

47 307

1050 mm 990 mm 387 mm

975 mm 915 mm 312 mm

For further information please contact Dyson on 7788 (UK) 01-401-8300 (IE) or email any questions to airbladeQ&A@dyson.com

JN. 22207 03.02.09