Pub. 988-0152-141 www.eaglesonar.com

Mapping GPS Receiver

Installation and Operation Instructions
Copyright 2005 LEI-Eagle. All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Eagle and IntelliMap are registered trademarks of LEI. MapCreate, FreedomMapsand NauticPath are trademarks of LEI. Fishing Hot Spots is a registered trademark of Fishing Hot Spots Inc. Navionics is a registered trademark of Navionics, Inc.
eXitSource Database, copyright 2001-2005 Zenrin Co. Ltd. Exit Authority and eXitSource are trademarks of Zenrin Co. Ltd.
Eagle Electronics may find it necessary to change or end our policies, regulations and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice. All screens in this manual are simulated. For free owner's manuals and the most current information on this product, its operation and accessories, visit our web site:

www.eaglegps.com

Eagle Electronics P.O. Box 669 Catoosa, OK USA 74015 Printed in USA.

Table of Contents

Section 1: Read Me First!... 1 Capabilities and Specifications: IntelliMap 502C iGPS. 2 How GPS Works... 4 Introduction to GPS and WAAS.. 6 How to use this manual: typographical conventions. 8 Section 2: Installation & Accessories.. 11 Preparations... 11 Power Connections... 11 NMEA Cable Connections... 14 Mounting the Unit: Bracket or Portable... 14 MMC or SD Card Memory Card Installation.. 17 Other Accessories.... 18 Section 3: Basic GPS Operations.. 21 Keyboard... 21 Power/lights on and off... 22 Main Menu... 22 Pages.... 24 Satellite Status Page... 24 Navigation Page... 26 Map Page.... 28 Background map vs. MapCreate map content.. 30 Resize Window command... 32 Basic GPS Quick Reference... 34 Find Your Current Position... 35 Moving Around the Map: Zoom & Cursor Arrow Keys. 35 Selecting Any Map Item with the Cursor.. 36 Searching... 36 Set a Waypoint.... 39 To create and save a Waypoint:.. 39 Navigate To a Waypoint.. 41 Set Man Overboard (MOB) Waypoint.. 42 Navigate Back to MOB Waypoint.. 42 Navigate to Cursor Position on Map.. 43 Navigate to a Point of Interest.. 45 Creating and Saving a Trail... 45 Displaying a Saved Trail... 47 Navigating Trails... 47 Visual Trailing... 48 Navigate a Trail (forward).. 48 Navigate a Back Trail (backtrack, or reverse).. 50 Transfer Custom Maps and GPS Data Files.. 51 i
Custom Maps:... 51 GPS Data files:... 51 Cancel Navigation... 53 Section 4: Advanced GPS Operations.. 55 Find Distance From Current Position To Another Location. 55 Find Distance From Point to Point.. 55 Icons... 56 Create Icon on Map... 56 Create Icon at Current Position... 56 Delete an Icon... 57 Navigate to an Icon... 57 Routes... 57 Create and Save a Route.. 58 Delete a Route... 61 Edit a Route Name.. 61 Edit Route Waypoints.. 61 Navigate a Route... 62 Navigate a Route in Reverse... 63 Trails.... 64 Delete a Trail... 64 Edit a Trail Name... 65 Edit a Trail Color... 65 Edit a Trail Pattern... 65 Utilities... 66 Alarm Clock... 66 Sun/Moon Rise & Set Calculator.. 66 Trip Calculator... 66 Trip Down Timer... 66 Trip Up Timer... 66 Waypoints.... 66 Delete a Waypoint... 66 Edit a Waypoint... 67 Selecting a Waypoint... 67 Set a Waypoint by Average Position.. 68 Set a Waypoint by Projecting a Position.. 68 Section 5: System & GPS Setup Options.. 69 Alarms.... 69 Check MMC Files and Storage Space... 70 Communications Port Configuration.. 70 Configure NMEA... 71 Coordinate System Selection... 72 To setup Loran TD:... 73 Customize Page Displays... 74 ii

Case size:.. 5.4" H x 6.9" W x 3.4" D (13.8 x 17.6 x 8.6 cm); sealed and waterproof; suitable for saltwater use. MMC slots:.. One with waterproof door (SD card compatible). Recording:. MMC & SD cards for recording GPS trip details and displaying charts or custom maps. Back-up memory:.. Built-in memory stores GPS data for decades. User settings are stored when unit is turned off. Languages:.. 10; menu languages selectable by user. GPS Receiver/antenna:. Internal; Built-in 12 parallel channel GPS/WAAS. Background map:.. Built-in custom, detailed Eagle map. Contains: enhanced detail of continental U.S. and Hawaii. Includes more than 60,000 nav aids and 10,000 wrecks/obstructions in coastal and Great Lakes waters. Metro areas, selected major streets/highways and interstate exit services details included. Custom mapping:.. MapCreate 6 software optional; optional plug and play LEI FreedomMaps offer the same high-detail without the computer work of MapCreate. Other plug and play mapping options include Fishing Hot Spots, LakeMaster Pro Maps, LEI NauticPath charts and Navionics charts. Mapping memory:. Up to 2 gigabytes on one MMC (or SD) card. Position updates:.. Every second. Position points:. 1,000 waypoints; 1,000 event marker icons. Audible alarms:. Arrival/off-course/anchor. Graphic symbols for waypoints or event marker icons:.. 42. Routes:.. 100, up to 100 waypoints per route. Plot Trails:.. 10 savable; up to 10,000 points per trail. 3
Zoom range:.. 40 ranges; 0.02 to 4,000 miles. NOTE: The above memory capacities refer only to the IntelliMap 502C's onboard memory. The amount of GPS data you can record and save for recall later is limited only by the number and size of MMC cards you have. NOTICE! The storage temperature range for your IntelliMap 502C is from -4 degrees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celsius). Extended storage in temperatures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is not covered by the warranty. For more information, contact the factory's Customer Service Department; phone numbers are listed on the last page of this manual.

How GPS Works

You'll navigate faster and easier if you understand how the IntelliMap 502C scans the sky to tell you where you are on the earth and, where you're going. (But if you already have a working understanding of GPS receivers and the GPS navigation system, skip on ahead to Section 2, Installation & Accessories on page 11. If you're new to GPS, read on. You can later impress your friends with your new-found knowledge.) First, think of your unit as a small but powerful computer. (But don't worry we made it easy to use, so you don't need to be a computer expert to find your way!) The IntelliMap 502C includes a keypad and a screen with menus so you can tell it what to do. The screen also lets the unit show your location on a moving map, as well as point the way to your destination. This gimbal-mounted IntelliMap 502C uses an internal antenna/receiver module, which makes the whole system work something like your car radio. But instead of your favorite dance tunes, this receiver tunes in to a couple of dozen GPS satellites circling the earth. (It will also listen in to the WAAS satellites in orbit, but more about that in the upcoming segment introducing you to GPS and WAAS.) Your unit listens to signals from as many satellites as it can "see" above the horizon, eliminates the weakest signals, then computes its location in relation to those satellites. Once the IntelliMap 502C figures its latitude and longitude, it plots that position on the moving map shown on the screen. The whole process takes place several times a second! The performance doesn't stop there. Stored in the permanent memory of each unit is a basic background map of the entire world. We lock it in here at the factory you can't change or erase this map. 4

To unit Optional power off switch for saltwater installations
Black wire 12 volt battery

Red wire with 3 amp fuse

Power connections for the IntelliMap 502C GPS unit.
WARNING: This product must be independently fused with the enclosed 3-amp fuse (or equivalent), even if you connect to a fused accessory or power buss. If a malfunction happens inside the unit, extensive damage can occur if the enclosed fuse is not used. As with all electrical devices, this unit could be damaged to a point that it is not repairable and could even cause harm to the user when not properly fused. 12
CAUTION: Failure to use the enclosed 3-amp fuse will void your warranty! For a replacement, use a type 3AG 3-amp fuse. This unit has reverse polarity protection. No damage will occur if the power wires are reversed. However, the unit will not work until the wires are attached correctly.

Rear view of unit

Power Connector
NMEA 0183 Com Port Power cable

3-amp fuse

Com port data wires (three)

12-volt battery

Cable connections.

NMEA Cable Connections

NMEA is a standard communications format for marine electronic equipment. For example, an autopilot can connect to the NMEA interface on the IntelliMap 502C and receive positioning information. The IntelliMap 502C can exchange information with any device that transmits or receives NMEA 0183 data, however, a communications cable is not available for the unit at press time. If you need to create a NMEA 0183 connection, consult customer service. Service contact information is located in the back of this manual. See the diagram on the preceding page for general wiring connections. Read your other products owners manual for more wiring information. NMEA Wiring To exchange NMEA data, the IntelliMap 502C has one NMEA 0183 version 2.0 communication port. Com port one (Com-1) can be used to receive NMEA format GPS data. The com port can also transmit NMEA format GPS data to another device. A data cable should contain three wires. Com-1 uses the yellow wire to transmit, the orange wire to receive and the shield wire for signal ground.
Orange (Receive) Com-1 to IntelliMap 502C Shield (Ground) NMEA Transmit Ground To Other GPS Receiver
Com-1 wiring to receive NMEA position information from some other GPS receiver. Yellow (Transmit) Com-1 to IntelliMap 502C Shield (Ground) NMEA Receive Ground To Other Device
Com-1 wiring to transmit NMEA position information to another NMEA-compatible device.
Mounting the Unit: Bracket or Portable
You can install the IntelliMap 502C on the top of a dash with the supplied gimbal bracket. It can also be mounted on a portable power supply. If you use the supplied bracket, you may be interested in an optional R-A-M bracket mounting system. This converts the unit's gimbal bracket to a swivel mount, which can be used on the dash. R-A-M offers permanent mounts and temporary mounts suitable for many vehicle types. See your Eagle dealer or visit the LEI web site (www.lei-extras.com) for the latest 14

MapCreate 6 CD-ROM, left; MMC card reader for USB ports, right.
Now that you have your IntelliMap 502C installed, move on to Section 3, Basic GPS Operations. There, we'll present a series of step-by-step tutorials to teach you the basics of GPS navigation.
Section 3: Basic GPS Operations
This section addresses the unit's most basic GPS operations. The tutorials presented in Sec. 3 follow a chronological order. Sec. 4, Advanced GPS Operations, will discuss other more advanced functions and utilities. Material in Sec. 4 is arranged in alphabetical order. Before you turn on the unit and find where you are, it's a good idea to learn about the different keys, the three Page screens and how they all work together. BUT, if you just can't wait to get outside, turn to the one-page Quick Reference on page 34.

Keyboard

MMC slot access door IntelliMap 502C GPS unit, front view, showing Map Page, keyboard and access door for the MMC slot.
1. PWR/LIGHT (Power & Light) The PWR key turns the unit on and off and activates the backlight. 2. PAGES Pressing this and the arrow keys (4) switches the unit between the three different page screens. (Satellite Status Page, Navigation Page and Map Page.) Each page represents one of the unit's major operation modes.
3. MENU Press this key to show the menus and submenus, which allow you to select a command or adjust a feature. This also accesses search functions for streets, intersections, addresses and highway exits. 4. ARROW KEYS These keys are used to navigate through the menus, make menu selections and move the map cursor. 5. ENT/ICONS (Enter & Icons) This key allows you to save data, accept values or execute menu commands. It is also used to create event marker icons. 6. EXIT The Exit key lets you return to the previous screen, clear data or erase a menu. 7. WPT (Waypoint) The Waypoint key is used to save and recall waypoints, search for waypoints and access the waypoint list. It also launches the Point-of-Interest (POI) search menus and is involved in some navigation functions. 8. ZOUT (Zoom Out) This key lets you zoom the screen out. This lets you see a larger geographic area on the map. Less detail is seen as you zoom out. 9. ZIN (Zoom In) This key lets you zoom the screen in. Zooming in lets you see greater detail in a smaller geographic area on the map.

Power/lights on and off

To turn on the unit, press PWR. As the unit powers up, the Map Page is displayed first. (To switch to another page, press PAGES| or to Page Name|EXIT.) To turn on the backlight, press PWR again. The unit has three backlight levels to select from. Repeatedly pressing PWR will cycle through the backlight settings and turn off the backlight. Turn off the unit by pressing and holding the PWR key for 3 seconds.

Main Menu

Set a Waypoint

A waypoint is simply an electronic "address," based on the latitude and longitude of a position on the earth. A waypoint represents a location, spot, or destination that can be stored in memory, then be recalled and used later on for navigation purposes. You can create a waypoint at the cursor position on the map, or at your current position while you are navigating. You can create a waypoint at any location by manually entering the position's latitude and longitude. You can copy waypoints from your unit to your personal computer with MapCreate software. When you want to repeat a trip, these archived waypoints can be reloaded into your GPS unit. To create and save a Waypoint: These first two techniques use the Quick Save method, the fastest and easiest way to create a waypoint.
Create Waypoint at Current Position While you are traveling, press WPT|WPT. The waypoint is saved and
automatically given a name with a sequential number, such as "waypoint 003." The waypoint symbol and number appear on the map. NOTE: The Quick Save method uses the default waypoint symbol until you edit an existing waypoint and change its symbol. (Edit Waypoint Symbol is described in Sec. 4.) After you have changed a waypoint symbol, the unit will remember the one you chose and use it the next time you "quick save" a waypoint. To revert back to the default symbol, edit a waypoint, choose the original symbol or use the Reset Options command see Sec. 5.

Step 1.

Step 2.

Step 3.

Step 4.
Sequence for setting a waypoint. Step 1: while traveling, quickly press WPT twice to call up Find Waypoint screen (seen in Step 2) and set a point. Step 3: message says the waypoint has been saved. Step 4: vehicle continues on its way; number waypoint symbol is visible on map. Create Waypoint on Map
1. Use the arrow keys to move the cursor to the place where you want to make a waypoint. 2. Press WPT|WPT. The waypoint is saved and automatically given a name with a sequential number, such as "waypoint 001." The waypoint symbol and number appear on the map.

Create Waypoint by Entering a Position 1. Press WPT| to MY WAYPOINTS| to NEW|ENT.
2. Press to ENTERED POSITION|ENT| to CREATE|ENT.
3. Press to LATITUDE|ENT. Enter the latitude by pressing or to change the first character, then press to the next character and repeat until the latitude is correct. Press ENT. 4. Press to LONGITUDE|ENT. Enter the longitude by pressing or to change the first character, then press to the next character and repeat until the longitude is correct. Press ENT, then EXIT|EXIT to return to the previous page display. The waypoint is saved and automatically given a name with a sequential number, such as "waypoint 001." The waypoint symbol and number appear on the map and in the waypoint list.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor, then use the Navigate to Cursor command (we'll describe how later in this section.) However, you can avoid scrolling the map to pick your waypoint if you use the Find Waypoint commands: 1. Press WPT| to MY WAYPOINTS|ENT. To look up the nearest waypoint, press ENT; or, to look by name (and scroll through the entire waypoint list), press to NAME|ENT. For this example, look by name. 2. If your waypoint list is a long one, you can spell out the waypoint name in the FIND BY NAME box to search for it. (Press or to change the first character, then press to move the cursor to the next character and repeat until the name is correct, then press ENT to jump to the list below.) 3. If the list is short, you can jump directly to the FIND IN LIST box by pressing ENT. Use or to select the waypoint name, press ENT and the waypoint information screen appears with the GO TO command selected. 4. To begin navigating to the waypoint, press ENT.
Waypoint Course line (red) Trail line (magenta)
Off course range, set at 0.15 mile

Destination name

Navigation Page, navigating toward waypoint 001 and leaving a trail.
Set Man Overboard (MOB) Waypoint
One of boating's most terrifying events is having a friend or family member fall overboard. This situation can be deadly on any body of water fresh or salt. It's particularly dangerous at night or if you're out of sight of land. Of course, the first thing to do is remain calm and then use all standard safety procedures to rescue the person. This unit has a man overboard feature that shows navigation data to the location where the feature was activated. To activate it, press the ZOUT and ZIN keys at the same time. Your position at the time these keys are pressed is used as the man overboard position. Caution: Saving a new "Man Overboard" waypoint will overwrite and erase the previous "Man Overboard" waypoint.

MapCreate is the easiest method for preparing a route, simply because your PC's larger screen, keyboard and mouse are easier to manipulate than the unit. To load a MapCreate route into the unit, follow instructions in MapCreate's manual for creating a route and saving it as part of a GPS Data File (file format *.usr). Copy the GPS Data File to an MMC and insert the MMC in the unit. (See Sec. 2 for instructions on installing MMCs. To load the GPS Data File into the unit's memory, see the entry on Transfer Custom Maps & GPS Data Files in Sec. 3, Basic GPS Operations.)
Routes Created in the Unit
You can create a route by selecting existing waypoints from the waypoint list or you can set a series of route waypoints on the map with cursor arrows and the Enter key. In this example, we'll create a route from the map. 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE, press MENU|MENU| to ROUTE PLANNING|ENT.
Route Planning command on Main Menu, left, will open the Route List screen, right.
2. If necessary, press to select NEW ROUTE, then press ENT. (To add to an existing route, press or to route name|ENT.) 3. Press to (ROUTE END)|ENT| to ADD FROM MAP|ENT. The Map Page appears with the cursor showing.
Edit Route menu, left. Edit Route Waypoints menu, right, with Add From Map command selected.
4. Use the Zoom keys and arrow keys to move the map and cursor until the cursor is centered on the spot where you want your route to begin. (If you are starting at your current position or the current cursor position, you are already at the starting spot.) 5. Set the first route waypoint: press ENT. In this example, we moved to the entrance of the cove where our boat was docked to start out route a promising fishing spot next to an oil platform. (Creating this example route is illustrated in the following figures.) 59
Route creation sequence, from left: Fig. 1. Set route waypoint (1) at the cove entrance. Fig. 2. Move cursor northeast to set point (2) at channel entrance. Fig. 3. With point (2) set, move cursor southeast to mark channel exit with waypoint (3). In figures 2 and 3, notice the rubber band line extending from the previously set waypoint to the cursor. This line will become the course for the route. 4. 5. 6.
Route creation sequence, continued: Fig. 4. Point (3) set at channel mouth. Fig. 5. Waypoint (4) set further south along the beach, at a recognizable landmark (Bob Hall Pier). Waypoint PLFM Q W ends the route at an oil platform some distance from the shore. Fig. 6. Press EXIT to save the route and you return to this screen.
6. Move the cursor to the next point in the route, a spot where you need to turn or change direction, and press ENT to set the next waypoint. 7. Repeat step six until the route reaches your destination. 60

8. To save your route, press EXIT. The unit reverts to the Edit Route screen, with the route automatically named "Route 1" and stored in the unit's internal memory. You can edit the route and run other commands, but if you are finished with the route for now, return to the last page displayed by pressing EXIT|EXIT|EXIT. NOTE: When adding waypoints to an existing route, the inserted waypoints will appear in the route in front of the waypoint you have selected in the Edit Route menu. To insert waypoints at the end of the route, make sure to select (ROUTE END) before adding them. Delete a Route 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. 2. Press to route name|ENT. 3. Press to DELETE ROUTE|ENT| to YES|ENT.
You can also delete all routes at once: 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. 2. Press to DELETE ALL|ENT| to YES|ENT. Edit a Route Name You can edit the route name if you wish. 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. 2. Press to route name|ENT| to EDIT ROUTE NAME|ENT. 3. Press or to change the first character, then press to move the cursor to the next character and repeat until the name is correct, then press ENT. Return to the previous page by pressing EXIT|EXIT|EXIT|EXIT. Edit Route Waypoints You can edit the route by adding and removing waypoints. 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE press MENU|MENU| to ROUTE PLANNING|ENT. 2. Press to route name|ENT| to Route Waypoints List. Use and to select a waypoint, then press ENT. 61
Edit Route Waypoints menu.
3. Use and to select a command from the Edit Route Waypoints menu and press ENT. Add From Map lets you insert a waypoint in the route by clicking on a map location with the cursor. Add Waypoint calls up the Waypoint List so you can insert a waypoint from the list. Remove Waypoint will delete the waypoint from the route. View Waypoint will show you where the selected waypoint is on the map. NOTE: When adding waypoints to a route, the inserted waypoints will appear in the route in front of the waypoint you have selected. To insert waypoints at the end of the route, make sure to select (ROUTE END) before adding them. Navigate a Route 1. From the NAVIGATION PAGE, press MENU|ENT or from the MAP PAGE, press MENU|MENU| to ROUTE PLANNING|ENT.

Edit Trail Menu (left) with Pattern option selected. Edited trail with dotted line pattern is shown at right.

Utilities

Utilities are useful tools for traveling or for outdoor activities. Alarm Clock To get to the alarm clock menu: press MENU|MENU| to TIMERS|ENT| to ALARM CLOCK|ENT. Sun/Moon Rise & Set Calculator To get to the Sun/Moon menu: press MENU|MENU| to SUN/MOON CALCULATIONS|ENT. Trip Calculator To get to the Calculator menu: press MENU|MENU| to TRIP CALCULATOR|ENT. Trip Down Timer To get to the Down Timer menu: press MENU|MENU| to TIMERS|ENT| to DOWN TIMER|ENT. Trip Up Timer To get to the Up Timer menu: press MENU|MENU| to TIMERS|ENT|ENT.

Waypoints

Delete a Waypoint To delete a waypoint from the waypoint list: press WPT| to MY WAYPOINTS|ENT|ENT|ENT| to waypoint name|ENT| to DELETE WAYPOINT|ENT| to YES|ENT. To return to the previous page, press EXIT|EXIT. To delete a waypoint from the map: 1. Use the arrow keys to select the waypoint with the cursor. 66
2. Press WPT| to DELETE WAYPOINT|ENT| to YES|ENT. To return to the previous page and clear the cursor, press EXIT. To delete all waypoints at one time: press MENU|MENU| to SYSTEM SETUP|ENT| to DELETE ALL MY WAYPOINTS|ENT| to YES|ENT. To return to the previous page, press EXIT|EXIT. Edit a Waypoint

Waypoint Name

To edit waypoint name: 1. Press WPT| to MY WAYPOINTS|ENT|ENT|ENT| to waypoint name|ENT| to EDIT WAYPOINT|ENT|ENT. 2. Press or to change the first character, then press to the next character and repeat until the name is correct. Press ENT then EXIT|EXIT|EXIT|EXIT to return to the previous page display.

Waypoint Symbol

To edit waypoint symbol: 1. Press WPT| to MY WAYPOINTS|ENT|ENT|ENT| to waypoint name|ENT| to EDIT WAYPOINT|ENT| to ALTITUDE| to CHOOSE SYMBOL|ENT. 2. Use arrow keys to select desired symbol and press ENT. To return to the previous page, press EXIT|EXIT|EXIT|EXIT.

Waypoint Position

To edit waypoint position: 1. Press WPT| to MY WAYPOINTS|ENT|ENT|ENT| to waypoint name|ENT| to EDIT WAYPOINT|ENT. 2. Latitude: press to LATITUDE|ENT. Press or to change the first character, then press to the next character and repeat until the latitude is correct. Press EXIT. 3. Longitude: press to LONGITUDE|ENT. Press or to change the first character, then press to the next character and repeat until the longitude is correct. Press EXIT. 4. When latitude and longitude are correct, return to the previous page: press EXIT|EXIT|EXIT|EXIT. Selecting a Waypoint To select a waypoint on the map (for navigating to, for editing, etc.,) use the arrow keys and center the cursor over the waypoint. A highlighted halo will appear around the waypoint.

Map Auto Zoom

This receiver has an auto zoom feature that eliminates much of the button pushing that other brands of GPS receivers force you to make. It works in conjunction with the navigation features. First, start navigation to a waypoint. (See the waypoint section for more information on navigating to a waypoint.) Then, with the auto zoom mode on, the unit zooms out until the entire course shows, from the present position to the destination waypoint. As you travel toward the destination, the unit automatically begins zooming in one zoom range at a time always keeping the destination on the screen. To turn this feature on, from the MAP PAGE, press MENU| to AUTO ZOOM|ENT|EXIT. Repeat these steps to turn it off.

Map Data

This menu lets you turn the map off, if desired (which turns the map screen into a GPS plotter); turn off or on the pop-up map info boxes; draw the map boundaries or boxes around the areas of high detail; or fill land areas with gray. You can also turn on or off Map Overlays, which display latitude and longitude grid lines or range rings on the map. This menu lets you select Navionics Maps; for instructions, see the Navionics Charts entry in this section. To get to Map Data: From the Map Page, press MENU| to MAP DATA|ENT.

Map Data Menu

Show Map Data From the Map Page, press MENU| to MAP DATA|ENT. Press ENT to enter the EARTH MAP DETAIL selection list, and choose how much detail you want, from Off (so the unit operates like a GPS plotter) to High. After the option is set, press EXIT repeatedly to return to the page display. 77
Pop-up Map Information From the Map Page, press MENU| to MAP DATA|ENT. Press to POPUP MAP INFORMATION. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT|EXIT to return to the page display. Map Boundaries From the Map Page, press MENU| to MAP DATA|ENT. Press to DRAW MAP BOUNDARIES. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT|EXIT to return to the page display. Fill Water With White From the Map Page, press MENU| to MAP DATA|ENT. Press to FILL WATER WITH WHITE. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT|EXIT to return to the page display. Map Overlays (Range Rings; Lat/Long Grid) The map screen can be customized with four range rings and/or grids that divide the plotter into equal segments of latitude and longitude. Range rings are handy for visually estimating distances on the map. The ring diameters are based on the current zoom range. For example: at the 100 mile zoom, the screen will show two rings with your current position in the center. The large ring touching the left and right sides of the screen is 100 miles in diameter (same as the zoom range). The second smaller ring is 50 miles in diameter (always 1/2 the zoom range). The distance from your current position to the smaller ring (the ring's radius) is 25 miles (always 1/4 the zoom range). With the arrow keys and map cursor, you can scroll the map to see the third and fourth rings. In this example, the distance to the third ring is 75 miles and distance to the fourth ring is 100 miles from your current position. To set range rings: From the Map Page, press MENU| to MAP DATA|ENT. Press to RANGE RINGS. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT|EXIT to return to the page display. To set Lat/Long Grid: From the Map Page, press MENU| to MAP DATA|ENT. Press to LAT/LON GRID LINES. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.) After the option is set, press EXIT|EXIT to return to the page display.

Find by Name option, left, Find by Name menu, right.
4. When the POI's Waypoint Information screen is displayed, you can choose to "Go To" the POI waypoint by pressing ENT or find it on the map by pressing|ENT.
"Go To" POI option, left, "Find on Map" POI option, right.
Find Streets or Intersections
Find a Street 1. From the Map Page, press MENU| to FIND STREETS|ENT and the Find Streets Menu appears.
Find Streets command, left, Find Streets menu, right.
2. You must first fill in a street name in the First Street dialog box. Press ENT to display the Find By Name menu. There are two options: A. You can spell out the street in the top selection box. Press or to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct, then press ENT|ENT. B. Or you can jump down to the lower box and pick a street from the selection list. Press ENT, then press or to select a street from the list and press ENT.
Find Street By Name menu. Spell out name in the top box, or select from the list in the lower box.
3. The Find Streets menu reappears with the street you're searching for in the First Street box. (In this example, it's I-35.) To search for that street, press to FIND FIRST STREET|ENT. A message appears asking you to wait while the unit finds the street. When the Streets Found list appears, press or to select the street you are searching for and press ENT.
The Find Streets menu (left) with the Find First Street command highlighted. At right, Streets Found list.
4. The Map Page appears, with the cursor pointing to the found street.
Map Page showing results of a street search. The cursor points to the located street.
If you want to navigate to the found street at the cursor location, just press MENU|ENT|EXIT. Find an Intersection You must enter one street in the First Street dialog box and enter the next street in the Second Street dialog box. 1. From the Map Page, press MENU| to FIND STREETS|ENT and the Find Streets Menu appears. 2. You must fill in a street name in the First Street dialog box. Press ENT to display the Find By Name menu. There are two options: A. You can spell out the street in the top selection box. Press or to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct, then press ENT|ENT. B. Or you can jump down to the lower box and pick a street from the selection list. Press ENT, then press or to select a street from the list and press ENT. 3. The Find Streets menu reappears with the street you're searching for in the First Street box. (In this example, it's I-35.) 4. Now fill in the second street. Press to SECOND STREET|ENT and the Find By Name menu appears again. Just like before, there are two options: A. You can spell out the second street in the top selection box. Press or to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct, then press ENT|ENT. B. Or you can jump down to the lower box and pick the second street from the selection list. Press ENT, then press or to select a street from the list and press ENT.

1. This License Agreement applies to the one or more databases that your product may contain. We refer to these singly as a "Database" and together as the "Databases." Your product may thus include the "WBS Database" which contains worldwide background surface mapping data, the "SmartMap Database" which contains inland mapping data, or other Databases. 2. The Databases that your product may contain are licensed, not sold. We grant to you the nonexclusive, nonassignable right to use these Databases for supplemental navigation reference purposes, but only as long as you comply with the terms and conditions of this License Agreement. We reserve the right to terminate this license if you violate any aspect of this License Agreement. You are responsible for using official government charts and prudent navigation for safe travel. 3. The Databases housed in your product are protected by the copyright notices appearing on the product or its screen(s). You may NOT modify, adapt, translate, reverse engineer, decompile, disassemble, rent, lease, or resell any Database, and you may NOT create derivative works based upon any Database or its contents. Any unauthorized reproduction, use, or transfer of a Database may be a crime and may subject you to damages and attorney fees. 4. This License Agreement will terminate immediately without prior notice from us if you fail to comply with or violate any of the provisions of this Agreement. Upon termination, you will promptly return all products containing one or more Databases to us. 5. Prices and programs are subject to change without notice. 6. This License Agreement shall be governed by the laws of the State of Oklahoma and comprises the complete and exclusive understanding between you and us concerning the above subject matter. 125
DATABASES LIMITED WARRANTY
"We", "our", or "us" refers to Eagle Electronics, a division of LEI, the manufacturer of this product. "You" or "your" refers to the first person who purchases the product as a consumer item for personal, family, or household use. The Databases Limited Warranty applies to the one or more databases that your product may contain. We refer to each of these as a "Database" or together as the "Databases." Your product may thus include the "WBS Database" which contains worldwide background surface mapping data, the "SmartMap Database" which contains inland mapping data, or other Databases. We warrant to you that we have accurately compiled, processed, and reproduced the portions of the source material on which the Databases are based. However, we are under no obligation to provide updates to the Databases, and the data contained in the Databases may be incomplete when compared to the source material. WE MAKE NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND ABOUT THE ACCURACY OF THE SOURCE MATERIAL ITSELF, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR a PARTICULAR PURPOSE. If there is a defect in any Database, your exclusive remedy shall be, at our option, either a refund of the price you paid for the product containing the defective Database or a replacement of such product. WE WILL NOT UNDER ANY CIRCUMSTANCES BE LIABLE TO ANYONE FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR OTHER INDIRECT DAMAGE OF ANY KIND. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty does NOT apply in the following circumstances: (1) when the product has been serviced or repaired by anyone other than us, (2) when the product has been connected, installed, combined, altered, adjusted, or handled in a manner other than according to the instructions furnished with the product, (3) when any serial number has been effaced, altered, or removed, or (4) when any defect, problem, loss, or damage has resulted from any accident, misuse, negligence, or carelessness, or from any failure to provide reasonable and necessary maintenance in accordance with the instructions of the owners manual for the product. We reserve the right to make changes or improvements in our products from time to time without incurring the obligation to install such improvements or changes on equipment or items previously manufactured. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Your remedies under this warranty will be available so long as you can show in a reasonable manner that the defect occurred within one (1) year from the date of your original purchase, and we must receive your warranty claim no later than 30 days after such 1-year period expires. Your claim must be substantiated by a dated sales receipt or sales slip.

EAGLE ELECTRONICS PO BOX 669, CATOOSA, OK 74015 (800) 324-1354

How to Obtain Service

in the USA:
We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number:

800-324-1354

8 a.m. to 5 p.m. Central Standard Time, M-F
Eagle Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. We reserve the right to do so without notice.

in Canada:

If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number:

800-661-3983

905-629-1614 (not toll-free)
8 a.m. to 5 p.m. Eastern Standard Time, M-F
outside Canada and the USA:
If you have technical, return or repair questions, contact the dealer in the country where you purchased your unit. To locate an Eagle dealer near you, visit our web site at www.eaglegps.com or consult your telephone directory for listings.
Accessory Ordering Information for all countries
To order Eagle accessories such as power cables or MMC cards, please contact: 1) Your local marine dealer or consumer electronics store. Most quality dealers that handle marine electronic equipment or other consumer electronics should be able to assist you with these items. To locate an Eagle dealer near you, visit our web site www.eaglesgps.com or consult your telephone directory for listings. at
2) U.S. customers: LEI Extras Inc., PO Box 129, Catoosa, OK 74015-0129. Call 1-800-324-0045 or visit our web site www.lei-extras.com.
3) Canadian customers can write: Lowrance/Eagle Canada, 919 Matheson Blvd. E. Mississauga, Ontario L4W2R7 or fax 905-629-3118.

Shipping Information

If it becomes necessary to send a product for repair or replacement, you must first receive a return authorization number from Customer Service. Products shipped without a return authorization will not be accepted. When shipping, we recommend you do the following: 1. Please do not ship the knobs or mounting bracket with your unit. 2. If you are sending a check for repair, please place your check in an envelope and tape it to the unit. 3. For proper testing, include a brief note with the product describing the problem. Be sure to include your name, return shipping address and a daytime telephone number. An e-mail address is optional but useful. 4. Pack the unit in a suitable size box with packing material to prevent any damage during shipping. 5. Write the Return Authorization (RA) number on the outside of the box underneath your return address. 6. For your security, you may want to insure the package through your shipping courier. Eagle does not assume responsibility for goods lost or damaged in transit.