Pub. 988-0152-161 www.eaglegps.com

IntelliMap 642c iGPS

Mapping GPS Receiver
Installation and Operation Instructions
Copyright 2005 LEI-Eagle All rights reserved. No part of this manual may be copied, reproduced, republished, transmitted or distributed for any purpose, without prior written consent of Eagle Electronics. Any unauthorized commercial distribution of this manual is strictly prohibited. Eagle is a registered trademark of LEI. MapCreate, FreedomMaps and NauticPath are trademarks of LEI. Fishing Hot Spots is a registered trademark of Fishing Hot Spots Inc. LakeMaster and ProMaps are trademarks or registered trademarks of Waypoint Technologies, Inc. Navionics is a registered trademark of Navionics, Inc.
eXitSource Database, copyright 2001-2005 Zenrin Co. Ltd. Exit Authority and eXitSource are trademarks of Zenrin Co. Ltd.
Eagle Electronics may find it necessary to change or end our policies, regulations and special offers at any time. We reserve the right to do so without notice. All features and specifications subject to change without notice. All screens in this manual are simulated.
For free owner's manuals and the most current information on this product, its operation and accessories, visit our web site:

www.eaglegps.com

Eagle Electronics P.O. Box 669 Catoosa, OK USA 74015 Printed in USA.

Table of Contents

Section 1: Read Me First!... 1 Capabilities and Specifications:.. 2 How GPS Works... 4 Introduction to GPS and WAAS.. 6 How to use this manual: typographical conventions. 8 Arrow Keys... 8 Keyboard... 8 Menu Commands... 8 Instructions = Menu Sequences... 8 Section 2: Installation & Accessories.. 11 Preparations... 11 Power Connections... 11 NMEA Cable Connections... 14 NMEA Wiring... 14 Mounting the Unit: Bracket or Portable... 14 MMC or SD Card Memory Card Installation.. 17 Other Accessories.... 18 Section 3: Basic GPS Operations.. 21 Keyboard... 21 Power/lights on and off... 22 Main Menu... 22 Pages.... 24 Satellite Status Page... 24 Navigation Page... 26 Map Page.... 28 Background map vs. MapCreate map content.. 30 Resize Window command... 32 Basic GPS Quick Reference.. 34 Moving Around the Map: Zoom & Cursor Arrow Keys. 35 Selecting Any Map Item With the Cursor.. 36 Searching... 36 Set a Waypoint.... 38 Navigate To a Waypoint.. 41 Set Man Overboard (MOB) Waypoint.. 42 Navigate Back to MOB Waypoint.. 42 Navigate to Cursor Position on Map.. 43 Navigate to a Point of Interest.. 44 Creating and Saving a Trail... 44 Displaying a Saved Trail... 46 Navigating Trails... 46 Visual Trailing... 47 i
Navigate a Trail... 47 Navigate a Back Trail.. 49 Transfer Custom Maps and GPS Data Files.. 50 Cancel Navigation... 52 Section 4: Advanced GPS Operations.. 53 Find Distance Current Position to Another Location. 53 Find Distance From Point to Point.. 53 Icons... 54 Create Icon on Map... 54 Create Icon at Current Position... 54 Delete an Icon... 54 Navigate to an Icon... 55 Routes... 55 Create and Save a Route.. 56 Delete a Route... 58 Edit a Route Name.. 59 Edit Route Waypoints.. 59 Navigate a Route... 59 Navigate a Route in Reverse... 61 Trails.... 62 Delete a Trail... 62 Edit a Trail Name... 62 Edit a Trail Color... 62 Edit a Trail Pattern... 63 Utilities... 63 Alarm Clock... 63 Sun/Moon Rise & Set Calculator.. 63 Trip Calculator... 63 Trip Down Timer... 63 Trip Up Timer... 63 Waypoints.... 64 Delete a Waypoint... 64 Edit a Waypoint... 64 Selecting a Waypoint... 65 Set a Waypoint by Average Position.. 65 Set a Waypoint by Projecting a Position.. 65 Section 5: System & GPS Setup Options.. 67 Alarms.... 67 Check MMC Files and Storage Space... 68 Communications Port Configuration.. 68 Configure NMEA... 69 Coordinate System Selection... 70 Customize Page Displays... 71 ii
GPS Simulator.... 72 Initialize GPS... 74 Map Auto Zoom... 74 Map Data... 74 Earth Map Detail... 75 Pop-up Map Information.. 75 Draw Map Boundaries... 75 Fill Water With White... 75 Map Overlays (Range Rings; Lat/Long Grid).. 75 Map Datum Selection... 76 Map Detail Category Drawn.. 77 Map Fix... 77 Map Orientation... 79 NauticPath USA Marine Charts... 80 Nautical Chart Notes... 80 Port Information... 81 Tidal Current Information.. 82 Tide Information... 84 Navionics Charts.... 85 Overlay Data... 86 Pop-up Help... 88 Reset Options... 89 Require WAAS.... 89 Screen Contrast and Brightness.. 90 Set Language... 91 Set Local Time.... 91 Show WAAS Alarm... 91 Software Version Information... 92 Sounds Menu... 92 Track Smoothing... 93 Trail Options... 93 Delete All Trails... 94 Update Trail Option... 94 Update Trail Criteria... 94 Trail Update Rate... 94 Delete Trail... 95 New Trail.... 95 Trail Visibility and Other Trail Options.. 95 Transparency... 96 Units of Measure... 97 Section 6: Searching... 99 Find Addresses... 100 Find Any Item Selected by Map Cursor.. 103 iii

Other Accessories

Other accessories include MMC cards, MMC card readers and MapCreate 6 custom mapping software for your computer. MMC card readers are available in USB and parallel port versions. If these accessories are not available from your dealer, see the accessory ordering information on the inside back cover of this manual.
MapCreate 6 CD-ROM (left) MMC card reader for USB ports (right).
Now that you have your IntelliMap 642c installed, move on to Section 3, Basic GPS Operations. There, we'll present a series of step-by-step tutorials to teach you the basics of GPS navigation.
Section 3: Basic GPS Operations
This section addresses the unit's most basic GPS operations. The tutorials presented in Sec. 3 follow a chronological order. Sec. 4, Advanced GPS Operations, will discuss other more advanced functions and utilities. Material in Sec. 4 is arranged in alphabetical order. Before you turn on the unit and find where you are, it's a good idea to learn about the different keys, the three Page screens and how they all work together. BUT, if you just can't wait to get outside, turn to the one-page Quick Reference on page 34.

Keyboard

MMC slot access door IntelliMap 642c GPS unit view showing the Map Page.
1. PWR/LIGHT The PWR key turns the unit on and off and activates the backlight. 2. PAGES Pressing the Pages key and the arrow keys switches the unit between the four different page screens: Satellite Status Page, Navigation Page and Map Page. 3. MENU Press the Menu key to show menus and submenus. This also accesses search functions for streets, intersections, addresses and highway exits.
4. ARROW KEYS These keys are used to navigate through menus, make menu selections and move around the map. 5. ENT/ICONS The Enter key allows you to save data, accept values and execute menu commands. It is also used to create event marker icons. 6. EXIT The Exit key lets you return to the previous screen, clear data or close a menu. 7. WPT The Waypoint key is used to save and recall waypoints, search for waypoints and access the waypoint list. It also launches Point-of-Interest (POI) search menus and is involved in some navigation functions. 8. ZOUT The Zoom Out key lets you zoom out the screen. On the Map Page, it lets you see a larger geographic area with less detail. 9. ZIN The Zoom In key lets you zoom in the screen. On the Map Page, it lets you see greater detail in a smaller geographic area.

Power/lights on and off

To turn on the unit, press PWR. As the unit powers up, the Map Page is displayed first. To switch to another page, press PAGES| to Page Name|EXIT. To turn on the backlight, press PWR again. The unit has three backlight levels. Repeatedly pressing PWR will cycle through the backlight settings and turn off the backlight. Turn off the unit by pressing and holding the PWR key for 3 seconds.

Find Your Current Position Finding your current position is as simple as turning on the unit. Under clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less. NOTE: Clear sky conditions means open sky, unobstructed by terrain, dense foliage or structures. Clouds do not restrict GPS reception. If for some reason satellite acquisition takes longer, you may be inside a structure or vehicle or in terrain that is blocking signal reception. To correct this, be sure you are positioned so that the unit has as clear a view of the sky as possible, then turn the unit off and back on again.
Moving Around the Map: Zoom & Cursor Arrow Keys
The map is presented from a bird's eye view perspective. The current zoom range shows in the lower left corner of the screen. 1. Press the ZIN key (zoom in) to move in closer and see greater detail in a smaller geographic area. 2. Press the ZOUT key (zoom out) to move farther away and see less map detail, but a larger geographic area. When you are traveling, the map will automatically move as you move. This keeps your current location roughly centered on the screen. You can manually pan or scroll the map northward, southward, eastward or westward by using the arrow keys, which launch the cross-hair map cursor. This allows you to look at map places other than your current position. To clear the cursor, press EXIT, which jumps the map back to the current position or the last known position.
Use the cursor to determine the distance from your current position (or last known position, when working indoors) to any map object or location. Use the arrow keys to position the cursor over the object or place. The distance, measured in a straight line, appears in the popup data box. Press EXIT to clear the cursor.
Distance measured by cursor
Pop-up name box Selected wreck
The selected wreck (the Empress) to the southeast is 12.81 miles away.
Selecting Any Map Item With the Cursor
1. Use the zoom keys and the arrow keys to move around the map and find the item you wish to select. 2. Use the arrow keys and center the cursor cross-hair on the desired object. On most items, a pop-up box will give the name of the selected item.
This unit has a Cursor Undo feature that lets you instantly return to the previous location without scrolling. Use the cursor to scroll across the map to some far away location or waypoint. Press EXIT to clear the cursor and jump back to your current position on the map. When you want to take another peek at that distant place, just press EXIT again. You can use this trick to toggle between your current position and your destination.

The man overboard position is also stored in the waypoint list for future reference. It can be edited the same as any other waypoint. This prevents the inadvertent loss of the current Man Overboard position. To cancel navigation to MOB, press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. The unit stops showing navigation information.
Navigate to Cursor Position on Map
The GO TO CURSOR command navigates to the current cursor position on the map. It is a quick way to navigate to anything you can see on the map display. 1. Use the cursor with the zoom in and zoom out keys to move around the map until you find a location you want to go to. 2. Center the cursor over the location to select it. See the example in the following figure. Map items like waypoints, Points of Interest and towns among others, can be selected and appear highlighted with a pop-up box. Other features, such as a river or a street intersection will not appear highlighted, but the cursor will take you to those locations just the same.
The cursor crosshairs are centered on Oologah, Oklahoma.
3. Press MENU|ENT and the unit will begin navigating to the cursor location. The Map Page will display a red line from your current position to the cursor position. The Navigation Page displays a compass rose showing navigation information to your destination. See the following examples.
The 60-mile zoom figure (left) shows the red course line connecting the current position to the destination. The Navigation Page (right) will also show navigation information.
To stop navigating to the cursor, use the Cancel Navigation command. Press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. The unit stops showing navigation information.
Navigate to a Point of Interest
You can use the Navigate to Cursor command for POIs in view on the map, just use the cursor to select the POI. The other method involves searching for POIs with the Find Waypoint command, launched with the WPT key. (See the searching example earlier in this section or turn to Sec. 9, Searching, for more instructions.) After you have looked up an item with the Find Waypoint command, use to make sure the GO TO command is highlighted at the bottom of the screen, then press ENT. The unit begins showing navigation information to the item. To cancel navigation, press MENU|MENU| to CANCEL NAVIGATION|ENT| to YES|ENT. The unit stops showing navigation information.
Creating and Saving a Trail
A trail or plot trail, is a string of position points plotted by the unit as you travel. It is a travel history, a record of the path you have taken. Trails are useful for repeating a journey along the same track. They are particularly handy when you are trying to retrace your trip and go back the way you came. On the screen, trails are represented by a solid line extending from the back of the current position arrow. The default color is light magenta.

Figure 1.

Figure 2.

Figure 3.

Figure 4.
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate Route command highlighted for Trail 2. A trail is always converted to a route when you navigate the trail.
On the Map Page, the trail you are navigating is represented by a magenta line when the visible trail option is on. The course you are following is represented by a red line. The magenta trail line overlays the red course line. To see the red course line, you must turn off the visible trail option. The Navigation Page will show only the red course line, unless you are recording a new trail. The bearing arrow on the compass rose points to the next waypoint on the trail. As you travel, the arrival alarm will go off when you near a trail waypoint and the bearing arrow on the compass rose will swing around toward the next trail waypoint. Press EXIT to clear the alarm. 48
North Present position arrow Magenta trail line Trail point
Navigate trail: Driver is heading southeast straight toward trail point 3 (left). Driver has reached point 3 and has turned southwest to follow the trail (right). Track or compass heading indicator Trail Bearing arrow waypoint symbol Red course line made from trail

Magenta new trail

Cross track error range (off course indicator)

Arrival alarm

Navigate trail, navigation page (compass rose) views: Driver is heading north straight toward trail point 3 (left). Bearing arrow shows the bearing to the trail point is 355 degrees. Driver has reached trail point 3 (right), causing the Arrival alarm to go off. The unit now shows navigation information to point 4, which is 1.42 miles away.
Navigate a Back Trail 1. Press MENU|MENU| to MY TRAILS|ENT. 2. Press to enter the Saved Trail list, then use to select the desired Trail Name|ENT. 3. Press to NAVIGATE|ENT. 4. Press to REVERSE ROUTE|ENT| to NAVIGATE|ENT. The unit shows navigation information along the trail, in reverse. 49
NOTE: If you are already located at or near the end of your trail, the arrival alarm will go off as soon as you hit Enter. Just press EXIT to clear the alarm and proceed. 5. Now, begin moving and let your unit guide you. 6. When you reach your destination, be sure to cancel your navigation. Press MENU|MENU| to CANCEL NAVIGATION|ENT. A confirmation message will appear. Press |ENT.

2. Latitude: press to LATITUDE|ENT. Press to change the first character, then press to the next character and repeat until the latitude is correct. Press EXIT. 3. Longitude: press to LONGITUDE|ENT. Press to change the first character, then press to the next character and repeat until the longitude is correct. Press EXIT. To return to the main page display, press EXIT repeatedly. Selecting a Waypoint To select a waypoint on the map center the cursor crosshairs on the waypoint. A red border will appear around the waypoint. Set a Waypoint by Average Position A waypoint set by average position is created after several position readings have been averaged. This boosts waypoint position accuracy by helping to eliminate errors caused by atmospheric conditions and other factors. 1. Press WPT| to MY WAYPOINTS| to NEW|ENT. 2. Press to AVERAGE POSITION|ENT|press to CREATE|ENT. 3. Wait while the unit takes points to get an average for the position. The greater the number of points, the greater the accuracy. When the desired number of points accumulates, press ENT to create the waypoint. 4. The Edit Waypoint menu appears. Press EXIT repeatedly to get back to the main page display. Set a Waypoint by Projecting a Position This feature creates a waypoint at a location a specific distance and bearing from a reference position. The reference position can be a waypoint, map feature or Point of Interest. 1. Press WPT| to MY WAYPOINTS| to NEW|ENT. 2. Press to PROJECTED POSITION|ENT| to CREATE|ENT. 3. Select CHOOSE REFERENCE|ENT. Use to select a waypoint, map feature or Point of Interest. When a selection has been made press ENT. Press , to choose a subcategory, then press ENT. Highlight NAME|ENT. Spell out the name of the desired reference point in the Find By Name box or press ENT to the find the point in the list below. After you have selected a point, press ENT. That will launch the waypoint information window. Highlight SET REFERENCE and press ENT.
4. Press to DISTANCE|ENT. Press to change the first character, then press to the next character and repeat until the distance is correct. Press ENT. 5. Press to BEARING|ENT. Press to change the first character, then press to the next character and repeat until the bearing is correct. Press ENT. 6. Press to PROJECT|ENT. The Edit Waypoint menu appears. Press EXIT|EXIT to get back to the main page display or press EXIT|ENT to navigate to the new waypoint.

Configure Loran TD menu.

Customize Page Displays
Every Page display option except Full Map page option has customizable data boxes to provide constant on-screen information. To change the information displayed in a data box: On the page with a digital data box you want to change, press MENU| to CUSTOMIZE|ENT. 1. A data box name flashes, indicating it is selected. Press ENT to change the data in that box or use , to select another box to customize. With the desired data box highlighted and flashing, press ENT to access the Data Viewer menu. 71
The Data Viewer menu has four categories: GPS Data, Navigation, Trip Calculator and Time. Each category has its own data option menu.
Ground Speed flashing on Two Position Map page (left). Data Viewer menu with no open categories (center). GPS data category opened with Ground Speed selected (right).
2. Select a data category. If the desired category is flanked by a "+", a list of data options will appear when you highlight the category and press ENT. After opening a category it will have a "" next to it. To close the category, highlight it and press ENT. 4. Open the desired category and use to select the desired data option and press ENT to turn it on (check) or turn it off (uncheck) and press EXIT. 5. If you want to change the data in another digital data box, use and press ENT when the desired box is highlighted. If you are satisfied with the current display, press EXIT to return to normal operation. A Page display can show a limited number of data boxes. You can not turn them off or add more data boxes.

GPS Simulator

The GPS simulator simulates real world navigation. It is a great way to practice using your unit. You can set the starting location by entering latitude/longitude or from a stored waypoint, map place or POI location. You can steer the position arrow and change speed on the map by using the arrow keys STEER WITH ARROWS command or by setting the track and speed in the dialog boxes provided on the simulator menu screen. To get to the GPS Simulator: 1. Press MENU|MENU| to GPS SETUP|ENT. 2. Press to GPS SIMULATOR|ENT. The GPS Simulator Menu appears.
GPS Setup Menu (left). GPS Simulator menu (center). Map Page showing Steer with Arrows dialog boxes (right). The traveler is following a track of 144 at a speed of 71 miles per hour.
Choose the desired settings, then turn on the simulator by highlighting the GPS SIMULATOR ON box and pressing ENT. Press EXIT repeatedly to get back to the main page display. A message and tone appear periodically to remind you the simulator is on. To turn off the simulator, repeat the steps above or turn off the unit. If you selected the Steer with Arrows command and want to remove the dialog boxes from the screen, press EXIT. That will clear the track and speed boxes without disrupting the simulation and allow you to use the map cursor. Simulating Trail or Route Navigation In Simulator mode, your unit can automatically follow a trail or route without manual steering if you use these steps: 1. From the Map Page, go to the simulator menu. Pick a STARTING POSITION at or near the beginning of your trail/route. Enter an approximate TRACK (shown in compass degrees) that will point you toward the start of the trail/route. 2. Set SPEED to zero. Select STEER WITH ARROWS command and press ENT, which turns on the simulator and returns you to the Map Page. 3. Begin navigating along the trail/route. (If you are close enough to the first waypoint, the arrival alarm will usually go off as soon as navigation begins. Press EXIT to clear the alarm.) When navigation starts, press to increase speed to the desired setting. 4. Press EXIT to turn off the steering and speed boxes. The unit will now automatically steer along the trail or route. When you arrive at your destination, cancel navigation.

GPS Setup Menu (left). Map Datum Menu (right).
Map Detail Category Drawn
This menu determines what mapping features are shown on the screen. This includes, waypoints, trails, icons, cities and highways, etc. You can turn on or off any of these items, customizing the map to your needs.
Map Menu (left). Map Categories Drawn Menu (right).
To get to Map Categories Drawn: 1. From the Map Page, press MENU| to MAP CATEGORIES DRAWN|ENT. 2. Scroll through the list of categories. Press ENT to turn on (check) or turn off (uncheck) a category. When a category is on, press to jump to the subcategory window. Press ENT to turn on or off subcategories. 3. Press EXIT|EXIT to get back to the main page display.

Map Fix

Map Fix is used with charts or maps. This system asks for a reference position in latitude/longitude, which you take from a marked location 77
on the map. It then shows the present position as distance on the map from that reference point. For example, if it shows a distance of UP 4.00" and LEFT 0.50", you then measure up four inches and to the left a half-inch from the reference point on the map to find your location. To configure a map fix: To use this format, you need to follow these steps in order. Take a map of the area and determine a reference latitude/longitude. NOTE: In order for this system to work, the latitude/longitude lines must be parallel with the edge of the map. USGS maps are parallel, others may not be. Also, this works better with smaller scale maps, such as 1:24000. The reference position can be anywhere on the map, but the closer it is to your location, the smaller the numbers you will be working with. Once you have decided on a reference position, you can save it as a waypoint. See the waypoint section for information on saving a waypoint. Save the reference position as a waypoint. Exit the waypoint screens. 1. Press MENU|MENU| to GPS SETUP|ENT. 2. Press to COORDINATE SYSTEM|ENT. 3. Press to SETUP MAP FIX|ENT. The screen below appears, and MAP SCALE is highlighted. Press ENT and enter the map's scale. This is generally at the bottom of the paper map. It's shown as a ratio, like 1:24000. Press EXIT and the unit returns to the Configure Map Fix screen.

NauticPath USA Marine Charts
Your unit can display NauticPath electronic charts on MMCs. They work just like a MapCreate custom map on a MMC. Nautical Chart Notes NauticPath charts contain notes or chart information, represented by circle-i Chart Note icons on the map display. An example is shown in the following figure.
NauticPath chart showing Chart Note icon selected by cursor (left).
To view Chart Note information: 1. Use the arrow keys to move the cursor over a Chart Note icon. When it's selected, a pop-up name box appears. 2. Press WPT to display the Note Information screen. 3. To scroll through the Chart Note screen, use arrow keys to read the information. To return to the main page display, press EXIT repeatedly.
Entrance to Aransas Pass on a NauticPath chart with 8-nautical mile zoom (left). Remaining images (left to right): same position at 4nautical mile, 1-nautical mile and 0.3- nautical mile zoom ranges.
Port Information NauticPath charts contain Port Services information, represented by anchor icons on the map display. These icons will appear when you are zoomed in to a 4-nautical mile range. An example is displayed in the following figures. To view Port Services information: 1. Use the arrow keys to move the cursor over a Port Services icon. When it is selected, a pop-up name box appears. 2. Press WPT to display the Port Services Information screen. The Port Services information screen for a NauticPath chart contains all the service information in one window. 3. To scroll through the service information window, use to see the types of services available. To return to the main page display, press EXIT repeatedly.
Port Services icon Pop-up name box
NauticPath chart showing Port Services icon selected by cursor. When first highlighted, the Pop-Up name box appears.
Tidal Current Information NauticPath charts contain Tidal Current information, represented at large zoom ranges by a box icon with the letter "C." These icons will appear when you are zoomed in to a 6-mile range. The icon stands for a Tidal Current Station location. An example is displayed on the right. When you zoom in to a sufficiently small zoom range (0.8 nautical mile), the icon becomes an animated arrow showing tidal current velocity and direction for the selected tidal station at the present time. At larger zoom ranges, you can select the boxed "C" icon and it becomes an animated arrow with a pop-up name box (the name box disappears after a few seconds). Examples are displayed in the following figures. To view Tidal Current information: 1. Use the arrow keys to move the cursor over a Tidal Current Station icon. When it is selected, a pop-up name box appears. 2. Press WPT to display the Tidal Current Information screen.
Tidal Current Station icon in animated mode

Cursor lines

NauticPath chart showing Tidal Current Station icon selected by cursor (left). Icon animates automatically at.08-mile zoom range (right). Current Time Line

Find by Name option (left). Find by Name menu (right).
4. When the POI's Waypoint Information screen is displayed, you can choose to Go To the POI waypoint by pressing ENT or find it on the map by pressing |ENT.
Go To POI option (left). Find on Map POI option (right).
Find Streets or Intersections
Find a Street 1. From the Map Page, press MENU| to FIND STREETS|ENT and the Find Streets Menu appears.
Find Streets command (left). Find Streets menu (right).
2. You must enter a street name in the First Street dialog box. Press ENT to display the Find By Name menu. There are two options: A. You can spell out the street in the top selection box. Press to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct, then press ENT|ENT. B. Or you can jump down to the lower box and pick a street from the selection list. Press ENT, then press to select a street from the list and press ENT.
The Find Streets menu with the Find First Street command highlighted (left). Streets Found list (center). Map Page showing results of a street search (right). The cursor points to the located street.
3. The Find Streets menu reappears with the street you are searching for in the First Street box. To search for that street, press to FIND FIRST STREET|ENT. When the Streets Found list appears, press to select the street you are searching for and press ENT. 4. The Map Page appears, with the cursor pointing to the found street. If you want to navigate to the found street at the cursor location, just press MENU|ENT|EXIT. Find an Intersection You must enter one street in the First Street dialog box and enter the next street in the Second Street dialog box. 1. From the Map Page, press MENU| to FIND STREETS|ENT and the Find Streets Menu appears. 2. You must fill in a street name in the First Street dialog box. Press ENT to display the Find By Name menu. There are two options: A. You can spell out the street in the top selection box. Press to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct and press ENT|ENT. B. Or you can jump down to the lower box and pick a street from the selection list. Press ENT, then use to select a street from the list and press ENT. 3. The Find Streets menu reappears with the street you are searching for in the First Street box. 4. Now fill in the second street. Press to SECOND STREET|ENT and the Find By Name menu appears again. Just like before, there are two options: A. You can spell out the second street in the top selection box. Press to change the first letter, then press to move the cursor to the next letter and repeat until the name is correct, then press ENT|ENT. 108

Find By Name menu (left). Waypoint Information screen (center). The cursor crosshairs are centered on the desired waypoint (right).
A. To navigate to the waypoint, press ENT. The Go To Waypoint command is already highlighted. The unit will show navigation information to the waypoint. B. To find the waypoint, press to FIND ON MAP|ENT. The Map Page appears with the cursor crosshairs centered on the found waypoint.
Section 7: Supplemental Material Datums Used by This Unit
WGS 1984 Default Adindan Mean for Ethiopia, Sudan Adindan Burkina Faso Adindan Cameroon Adindan Ethiopia Adindan Mali Adindan Senegal Adindan Sudan Afgooye Somalia Ain el Abd 1970 Bahrain Ain el Abd 1970 Saudi Arabia Anna 1 Astro 1965 Cocos Islands Antigua Island Astro 1943; Antigua (Leeward Islands) Arc 1950; Mean for Botswana, Lesotho, Malawi, Swaziland, Zaire, Zambia and Zimbabwe Arc 1950 - Botswana Arc 1950 - Burundi Arc 1950 - Lesotho Arc 1950 - Malawi Arc 1950 - Swaziland Arc 1950 - Zaire Arc 1950 - Zambia Arc 1950 - Zimbabwe Arc 1960 - Mean for Kenya, Tanzania Ascension Island 1958 - Ascension Island Astro Beacon E 1945 - Iwo Jima Astro DOS 71/4 - St. Helena Island Astro Tern Island (FRIG) 1961 - Tern Island Astronomical Station 1952 - Marcus Island Australian Geodetic 1966 - Australia & Tasmania Bissau - GuineaBissau Bogota Observatory Colombia Bukit Rimpah - Indonesia (Bangka & Belitung Islands) Camp Area Astro Antarctica (McMurdo Camp Area) Campo Inchauspe Argentina Canton Astro 1966 Phoenix Islands Cape - South Africa Cape Canaveral Bahamas, Florida Carthage - Tunisia Switzerland Chatham Island Astro 1971; New Zealand (Chatham Island) Ayabelle Lighthouse Djibouti Bellevue (IGN) Efate & Erromango Islands Bermuda 1957 Bermuda Australian Geodetic 1984 - Australia & Tasmania
Chua Astro Paraguay Corrego Alegre Brazil Dabola Guinea Djakarta (Batavia) Indonesia (Sumatra) DOS 1968 New Georgia Islands (Gizo Island) Easter Island 1967 Easter Island European 1950 Mean for Austria, Belgium, Denmark, Finland, France, West Germany, Gibraltar, Greece, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland European 1950 Mean for Austria, Denmark, France, West Germany, Netherlands, Switzerland European 1950 Mean for Iraq, Israel, Jordan, Lebanon, Kuwait, Saudi Arabia, Syria European 1950 Cyprus European 1950 Egypt

Tokyo Mean for Japan, Korea, Okinawa Tokyo Japan Tokyo Korea Tokyo Okinawa Tristan Astro 1968 Tristan da Cunha Viti Levu 1916 Fiji (Viti Levu Island) Wake Eniwetok 1960 Marshall Islands Wake Island Astro 1952 Wake Atoll WGS 1972 Global Definition Yacare Uruguay Zanderij Suriname

FCC Compliance

This device complies with Part 15 of the U.S. Federal Communications Commission (FCC) Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the factory customer service department for help.
EAGLE DATABASES LICENSE AGREEMENT
THIS IS a LEGAL AGREEMENT BETWEEN THE END-USER WHO FIRST PURCHASES THIS PRODUCT AS a CONSUMER ITEM FOR PERSONAL, FAMILY, OR HOUSEHOLD USE ("YOU") AND EAGLE ELECTRONICS, a DIVISION OF LEI, THE MANUFACTURER OF THIS PRODUCT ("WE", "OUR", OR "US"). USING THE PRODUCT ACCOMPANIED BY THIS LICENSE AGREEMENT CONSTITUTES ACCEPTANCE OF THESE TERMS AND CONDITIONS. IF YOU DO NOT ACCEPT ALL TERMS AND CONDITIONS, PROMPTLY RETURN THE PRODUCT WITHIN 30 DAYS OF PURCHASE. PLEASE RETURN USING THE ENCLOSED UPS SHIPPING LABEL AND INCLUDE: PROOF OF PURCHASE, NAME, ADDRESS, AND PHONE NUMBER. YOUR PURCHASE PRICE AND ANY APPLICABLE TAXES WILL BE REFUNDED. PLEASE ALLOW 4-6 WEEKS TO PROCESS YOUR REFUND.

EAGLE ELECTRONICS PO BOX 669, CATOOSA, OK 74015 (800) 324-1354

How to Obtain Service

in the USA:
We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you're in the United States and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number:

800-324-1354

8 a.m. to 5 p.m. Central Standard Time, M-F
Eagle Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. We reserve the right to do so without notice.

in Canada:

If you're in Canada and you have technical, return or repair questions, please contact the Factory Customer Service Department. Before any product can be returned, you must call customer service to determine if a return is necessary. Many times, customer service can resolve your problem over the phone without sending your product to the factory. To call us, use the following toll-free number:

800-661-3983

905-629-1614 (not toll-free)
8 a.m. to 5 p.m. Eastern Standard Time, M-F
outside Canada and the USA:
If you have technical, return or repair questions, contact the dealer in the country where you purchased your unit. To locate an Eagle dealer near
you, visit our web site at www.eaglegps.com or consult your telephone directory for listings.
Accessory Ordering Information for all countries
To order Eagle accessories such as power cables or transducers, please contact: 1) Your local marine dealer or consumer electronics store. Most quality dealers that handle marine electronic equipment or other consumer electronics should be able to assist you with these items. To locate an Eagle dealer near you, visit our web site, www.eaglesonar.com and look for the Dealer Locator. Or, you can consult your telephone directory for listings. 2) U.S. customers: LEI Extras Inc., PO Box 129, Catoosa, OK 74015-0129 Call 1-800-324-0045 or visit our web site www.lei-extras.com. 3) Canadian customers can write: Lowrance/Eagle Canada, 919 Matheson Blvd. E. Mississauga, Ontario L4W2R7 or fax 905-629-3118.