Eagle Strataview 128 Portable
Eagle Strataview 128 Portable - Operation Instruction, size: 470 KB
Here you can find all about Eagle Strataview 128 Portable like manual and other informations. For example: review.
Eagle Strataview 128 Portable manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Eagle Strataview 128 Portable please write about it to help other people.
[ Report abuse or wrong photo | Share your Eagle Strataview 128 Portable photo ]
User reviews and opinions
|skbjull||8:57am on Thursday, September 23rd, 2010|
|Apple MacBook Pro Core 2 Duo 2.5 GHz - 17" TFT with spesification : sophisticated and offer the power of technology none My whole life I was a PC user. I never had many complaints. Then a few months ago I had to start using the MacBook Pro for work. I love it.|
|bscook||8:48am on Monday, September 20th, 2010|
|Buying my first computer was real exciting for me I was on the web searching for the best one I could find. We purchased a MacBook Pro laptop computer, Time Capsule, Snow Leopard and a Magic Mouse from Vanns in Helena.|
|izzo||8:24pm on Saturday, August 7th, 2010|
|This is our 3rd Mac Notebook, and by far the most refined. This machine in conjunction with Leopard runs and functions amazing. I upgraded to the MacBook Pro (MBP) from a PowerBook G4. The MBP offers a few new features, like the built-in iSight and the multi-touch trackpad.|
|david.west2||7:17pm on Monday, June 21st, 2010|
|This laptop is very well made. It has a battery life of about 7 hours under normal use. Fantastic battery life - easily hits 7 hours under normal usage.|
|ganesh4u||10:07pm on Thursday, June 10th, 2010|
|Overall this is one of the better laptops I h... The screen brightness, lit keyboard, trackpad. There is no comparison with the PC/Windows and a MacPro they are different in many respects, and perhaps similar with some. The Mac is fast. There is no comparison with the PC/Windows and a MacPro they are different in many respects, and perhaps similar with some. The Mac is fast.|
|QuizMasta||4:53pm on Saturday, May 29th, 2010|
|Notebook - Display Size: 13.3 in - CPU: Core 2 Duo - Processor Speed: 1.8 GHz - HD: 64 GB - RAM:2 GB Everithing Nothing In January 2009 listing, targeting high-end commercial graphic design, fashion design.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
Strata 128 Strata 128 Plus Strata 128 Por table Portable StrataView StrataView
INSTALLA ALLATION OPERATION INSTALLATION AND OPERATION INSTRUCTIONS INSTRUCTIONS
TABLE OF CONTENTS
INTRODUCTION.... 3 SPECIFICATIONS... 3 INSTALLATION -Transducer... 5 POWER CONNECTIONS... 13 BRACKET INSTALLATION... 14 PORTABLE ASSEMBLY... 15 SPEED/TEMP SENSORS... 16 KEYBOARD BASICS... 20 DISPLAY.... 20 OPERATION.... 21 MENUS.... 21 AUTOMATIC.... 21 RANGE.... 21 ZOOM.... 22 SENSITIVITY... 24 GRAYLINE.... 24 FISH ID.... 25 FISH TRACK.... 26 TARGET TRACK.... 26 CHART SPEED.... 27 DISPLAY MODE... 28 ALARMS.... 32 BACK LIGHT.... 33 FEET/METER.... 33 DISPLAY CONTRAST... 33 ASP (Advanced Signal Processing)... 34 SIMULATOR.... 34 TROUBLESHOOTING... 35 WARRANTY.... 38
Copyright 1998, Eagle Electronics All features and specifications in this manual are subject to change without notice. All screens in this manual are simulated. Eagle Electronics PO Box 669 Catoosa, OK 74015
INTRODUCTION Thank you for purchasing an Eagle sonar. Your sonar unit is a high quality sonar designed for both professional and novice fishermen. All of our sonars have an automatic feature that finds and displays the bottom, fish, structure, and more! All you have to do is press the on key. However, if you wish to fine tune the unit, all you have to do is press the menu key. The Strata series has powerful features available through easy-to-use menus. To get started with your Eagle unit, first read the installation section. This is where it all begins. Improper installation can cause problems down the road. After youve read the instructions, install the unit, then read the rest of the manual. The more you know about your unit, the better it will perform for you. Take this manual for reference when you head for the water.
SPECIFICATIONS Dimensions.. Input Voltage.. Current Drain.. Transmitter Frequency.. Output Power. Display...
5.9" W x 5.35" H x 3.4" D 10 - 15 vDC 350 ma (lights off) 500 ma (lights on) 192 kHz 275 watts (peak-to-peak) (typical) 34.4 watts (RMS) 128 pixels (H) x 65 pixels (W) Supertwist Liquid Crystal Display
NOTICE! The storage temperature for your unit is from -4 degrees to +167 degrees Fahrenheit (-20 degrees to +75 degrees Celcius). Extended storage in temperatures higher or lower than specified will damage the liquid crystal display in your unit. This type of damage is not covered by the warranty. For more information, contact the factory customer service department or your local service center.
The transducer included with your sonar is a transom mount transducer The kick-up mounting bracket helps prevent damage if the transducer strikes an object while the boat is moving. If the transducer does kickup, the bracket can easily be pushed back in place without tools. Read this manual carefully before attempting the installation. Determine which of the mounting positions is right for your boat. Use extreme care if mounting the transducer inside the hull, since once it is epoxied into position, the transducer usually cannot be removed. Remember, the transducer location is the most critical part of a sonar installation.
Location - General
1. The transducer must be placed in a location that has a smooth flow of water at all times. If the transducer is to be mounted inside the hull, then the chosen location must be in the water at all times. If the transducer is not placed in a smooth flow of water, interference will show on the sonars display in the form of random lines or dots whenever the boat is moving. 2. The transducer should be installed with its face pointing straight down, if possible. 3. If the transducer is mounted on the transom, make certain it doesnt interfere with the trailer or hauling of the boat. Also, dont mount it closer than approximately one foot from the engines lower unit. This will prevent cavitation interference with the propeller. Typically, the transducer should be mounted as deep in the water as possible. This increases the chance that it will be in the water in high speed and reduces the possiblity of air bubble interference. 4. If possible, route the transducer cable away from other wiring on the boat. Electrical noise from engine wiring, bilge pumps, and areators can be displayed on the sonars screen. Use caution when routing the transducer cable around these wires.
Shoot-thru-hull v.s. Transom Mounting
(Strata 128 and Strata 128 Plus Only) Typically, shoot-thru-hull installations give excellent high speed operation and good to excellent depth capability. There is no possibility of damage from floating objects. It can't be knocked off when docking or loading on the trailer. However, the shoot-thru-hull installation does have its drawbacks. One, some loss of sensitivity does occur, even on the best hulls. This varies from hull to hull, even from different installations on the same hull. This is caused by differences in hull layup and construction. Two, the angle of the transducer cannot be adjusted for the best fish arches. This can be a problem on some hulls that sit with the bow high when at rest or at slow trolling speeds. Follow the procedure listed in the shoot-thru-hull installation section in this manual to determine if you can satisfactorily shoot through the hull.
Transducer Assembly and Mounting - All Units The best way to install this transducer is to loosely assemble all of the parts first, place the transducers bracket against the transom and see if you can move the transducer so that its parallel with the ground. 1. Press the two small plastic ratchets into the sides of the metal bracket as shown below. Notice there are letters molded into each ratchet. Place each ratchet into the bracket with the letter A aligned with the dot stamped into the metal bracket. This position sets the transducers coarse angle adjustment for a fourteen (14) degree transom. Most outboard and stern-drive transoms have a fourteen degree angle.
2. Slide the transducer between the two ratchets. Temporally slide the bolt though the transducer assembly and hold it against the transom. Looking at the transducer from the side, check to see if it will adjust so that its face is parallel to the ground. If it does, then the A position is correct for your hull. If the transducers face isnt parallel with the ground, remove the transducer and ratchets from the bracket. Place the ratchets into the holes in the bracket with the letter B aligned with the dot stamped in the bracket. Reassemble the transducer and bracket and place them against the transom. Again, check to see if you can move the transducer so its parallel with the ground. If you can, then go to step 3. If it doesnt, repeat step 2, but use a different letter until you can place the transducer on the transom correctly.
3. Once you determine the correct position for the ratchets, assemble the transducer as shown at left. Don't tighten the lock nut at this time.
NUT METAL WASHER
RUBBER WASHERS BOLT
CAUTION! CLAMP THE TRANSDUCER CABLE TO TRANSOM NEAR THE TRANSDUCER. THIS WILL HELP PREVENT THE TRANSDUCER FROM ENTERING THE BOAT IF IT IS KNOCKED OFF AT HIGH SPEED.
4. Hold the transducer and bracket assembly against the transom. The transducer should be roughly parallel to the ground. The bottom of the transducer bracket should be in line with the bottom of the hull. Don't let the bracket extend below the hull! Mark the center of the slots for the mounting holes. Drill two 5/32" holes in the marked locations for the #10 screws supplied with the transducer.
5. Remove the transducer from the bracket and re-assemble it with the cable passing through the bracket over the bolt as shown above. Attach the transducer to the transom. Slide the transducer up or down until its aligned properly on the transom as shown above. Tighten the brackets mounting screws. Adjust the transducer so that its parallel to the ground and tighten the lock nut until it touches the flat washer, then add 1/4 turn. Dont over tighten the lock nut! If you do, the transducer wont kick-up if it strikes an object in the water. 6. Route the transducer cable to the sonar unit. Make certain to leave some slack inthe cable at the transducer as shown above. If possible, route the transducer cable away from other wiring on the boat. Electrical noise from the engines wiring, bilge pumps, VHF radio wires and cables, and aerators can be picked up by the sonar. Use caution when routing the transducer cable around these wires. IMPORTANT! Clamp the transducer cable to the transom close to the transducer. This can prevent the transducer from entering the boat if it is knocked off at high speed. 7. Make a test run to determine the results. If the bottom is lost at high speed, or if noise appears on the display, try sliding the transducer bracket down. This puts the transducer deeper into the water, hopefully below the turbulence causing the noise. Don't allow the transducer bracket to go below the bottom of the hull!
TROLLING MOTOR BRACKET INSTALLATION (StrataView Only) 1. Attach the TMB-S bracket to the transducer as shown below using the hardware supplied with the transducer. (Note: The internal tooth washer is supplied with the TMB-S.)
INTERNAL TOOTH WASHER BOLT NUT
2. Slide the adjustable strap supplied with the TMB-S through the slot in the transducer bracket and wrap it around the trolling motor. Position the transducer to aim straight down when the motor is in the water. Tighten the strap securely. Route the transducer cable alongside the trolling motor shaft. Use plastic ties (not included) to attach the transducer cable to the trolling motor shaft. Make certain there is enough slack in the cable for the motor to turn freely. Route the cable to the sonar unit and the transducer is ready for use.
(Strata 128 and Strata 128 Plus Only) The transducer installation inside a fiberglass hull must be in an area that does not have air bubbles in the resin or separated fiberglass layers. The sonar signal must pass through solid fiberglass. A successful transducer installation can be made on hulls with flotation materials (such as plywood, balsa wood, or foam) between layers of fiberglass if the material is removed from the chosen area. For example, some manufacturers use a layer of fiberglass, then a core of balsa wood, finishing with an outer layer of fiberglass. Removing the inner layer of fiberglass and the balsa wood core exposes the outer layer of fiberglass. The transducer can then be epoxied directly to the outer layer of fiberglass. After the epoxy cures, the hull is watertight and structurally sound. Remember, the sonar signal must pass through solid fiberglass. Any air bubbles in the fiberglass or the epoxy will reduce or eliminate the sonar signals. To choose the proper location for thru-hull mounting, anchor the boat in 60 feet of water. Add a little water to the sump of the boat. Plug the
FILL WITH EPOXY INNER HULL
EPOXY TO HULL FIRST
transducer into the sonar unit, turn it on, then hold the transducer over the side of the boat. Adjust the sensitivity and range controls until a second bottom echo is seen on the display. (you will need to turn both automatic and ASP off.) Dont touch the controls once theyve been set. Next, take the transducer out of the water and place it in the water in the sump of the boat. Observe the sonar signal to see if there is a noticeable decrease in sensitivity. The second bottom signal may disappear and the bottom signal may decrease in intensity. Move the transducer around to find the best location. If the sensitivity control has to be increased greatly to compensate, then the transducer should be mounted on the outside of the hull. If not, then mark the location that shot through the hull the best and follow the instructions on the next pages for a shoot-thru-hull mounting.
TRANSDUCER LOCATION (HIGH SPEED)
TRANSDUCER LOCATION (TROLLING SPEED)
(Strata 128 and Strata 128 Plus Only) 1. Make certain the area is clean, dry, and free of oil or grease, then sand both the inside surface of the hull and the face of the transducer with 100 grit sandpaper. The surface of the hull must be flat so the entire transducer face is in contact with the hull prior to bonding.
SPREAD EPOXY HERE
SAND THIS SURFACE
2. Follow the instructions on the epoxy package and mix it thoroughly. Do not mix it too fast, as it will cause bubbles to form in the epoxy. (NOTE! Use only the epoxies specified on the inside front cover of this manual! Failure to use one of these epoxies may result in poor sonar performance!) Apply a small amount on the face of the transducer as shown above, then spread a small amount onto the sanded area on the
hull. Place the transducer into the epoxy, twisting and turning it to force any air bubbles out from under the transducer face. The face of the transducer should be parallel with the hull, with a minimum amount of epoxy between the hull and transducer. After the epoxy dries, route the cable to the sonar unit.
SONAR UNIT GIMBAL BRACKET RUBBER WASHER PLASTIC WASHER (PORTABLE UNITS ONLY)
Attach the unit to the gimbal bracket using the supplied gimbal knobs and washers as shown above.
STRATA 128 PORTABLE ASSEMBLY INSTALLING THE BATTERIES Release the latch on the front of the battery case. Open the compartment and install four "D" cell batteries into the adapter. For the longest life, we recommend you use alkaline batteries. This battery case will also hold one rechargable battery instead of the "D" cells. See the enclosed coupon for more information on the rechargable battery.
"D" CELL BATTERY
After installing the batteries, close the case and plug the power cable on the battery case into the Strata 128 Portable. Turn the sonar unit on. If it doesn't work, make certain the battery terminals are making good contact against the battery contacts. Also check the wiring connections on the Dcell battery adapter. The red wire on the power cable should be attached to the red wire on the D-cell battery adapter and the power cable's black wire should be connected to the black wire on the D-cell battery adapter. If it still doesn't work, check the battery voltage. Most of the complaints we
receive about portable units result from stale batteries. Make certain the ones you buy are fresh. Always remove batteries from the battery compartment before storing the unit as dead batteries can leak and corrode the contacts. In cold weather the efficiency of dry cell batteries drops with the temperature. We find it a good idea to have the sonar unit good and warm along with the batteries before we leave home. If the batteries do lose a charge, you can sometimes restore them by placing them in a warm room or car interior. A better way is to replace them with batteries that have been kept warm. Don't ever heat the batteries over an open flame or direct hot air onto them. A fire or explosion could result.
PORTABLE TRANSDUCER ASSEMBLY Assemble the transducer and bracket as shown below. Attach the transducer to the bracket with the supplied hardware. Make certain there is one washer on each side of the transducer, inside the bracket. Slide the other washer over the end of the bolt and thread the nut onto it. Screw the suction cup onto the bracket using the supplied screw and flat washer. Tie the nylon cord through the hole in the top of the bracket. When using this transducer, tie the other end of the nylon cord to the boat. This will help prevent the loss of the transducer if it comes off the boat.
TIE NYLON CORD HERE SCREW
Clean the chosen area of the hull before attaching the suction cup. Locate the transducer on the hull as shown below. Don't allow the bracket to go below the hull, as water pressure against it can cause the suction cup to come off at speed. Moisten the cup, then press it onto the hull as firmly as possible. Tie the nylon cord to the boat and route the transducer cable to the sonar unit. Plug the transducer connector into the unit and your portable sonar is now ready for use.
SPEED/TEMPERATURE SENSORS The Strata Plus and StrataView can use up to three temperature sensors which can monitor surface water, live well, air, and virtually any other temperature. You do need to be careful when purchasing the temperature sensors, however. Each temperature sensor has its own "address". The sensors are labeled "Water", "T-2" (or Temp-2), and "T-3" (or Temp-3). If you want two (or more) temperature readings, you'll need to use the proper sensors. For example, you can't use two T-3 sensors. The sensors that will fit these units are: TS-1BK TS-2BK TS-3BK TS-12BK ST-TBK One sensor for "Water" temperature display. One sensor for "T-2" temperature display. One sensor for "T-3" temperature display. Two sensors for "Water" and "T-2" temperature displays. One speed sensor and one temperature sensor for "Speed" and "Water" displays. (comes with Strata Plus)
You can combine these sensors in many combinations. See the list on the following page for temperature and speed sensor combinations.
(Note: Do not use these sensors in any other combination.) ST-TBK = 1 speed sensor and 1 temperature display ST-T BK + TS-2BK = 2 temp sensors and one speed sensor ST-TBK + TS-2BK + TS-3BK = 3 temp sensors and one speed sensor TS-1BK = 1 temperature sensor TS-12BK = 2 temperature sensors or TS-1BK + TS-2BK = 2 temperature sensors TS-12BK + TS-3BK = 3 temperature sensors or TS-1BK + TS-2BK +TS-3BK = 3 temperature sensors
Here's some sample wiring diagrams:
Two Temperature Sensors (Water and T-2)
STRATA PLUS'S OR STRATAVIEW'S POWER CABLE 18
(Note: Do not use these sensors in any other combination.)
Three Temperature Sensors (Water, T-2, and T-3)
STRATA PLUS OR STRATAVIEW POWER CABLE ST-TBK
After you select the desired range, press the PWR key to clear the display. If you wait a few seconds, it will automatically clear. This unit has the following ranges: 10, 20, 40, 60, 120, 240, 480, and 900 feet. and 5, 10, 20, 40, 60, 100, 200, and 300 meters.
ZOOM The zoom feature enlarges all echoes on the screen. If the unit is in the automatic mode, it tracks the bottom signal, always keeping it near the bottom of the screen. This lets you see small detail, at the same time enlarging all echoes that appear on the screen. The unit doesnt track the bottom in the manual mode, and the adjustments are slightly different. Zoom - Automatic Operation To zoom the display, first press the MENU key until the RANGE/ZOOM menu appears as shown at right. Now press the down arrow key. This switches the unit into the zoom mode. A new menu immediately appears as shown below. This is the zoom size menu. Zoom size is the distance between the upper limit and the lower limit. The upper limit shows at the top left corner of the screen. The lower limit is in the bottom left corner. For example, if the upper limit is 40 feet and the lower limit is 70 feet, the zoom window size is 30 feet. The word TRACK appears in this menu when you first activate the zoom as shown at right.
This means the unit is tracking the bottom in a zoom window, always keeping it on the display. Press the up arrow key to decrease the zoom size, press the down arrow key to increase the zoom size. When the unit is switched into the zoom mode, the letters ZM appear at the top of the screen. The zoom window size displays in the top right corner of the screen. On the screen shown above, the zoom size has been changed to 20 feet. To turn the zoom feature off, press the menu key until the RANGE/ZOOM menu appears. Now press the up arrow key. This switches the unit into the range mode, which turns the zoom feature off. This unit has the following zoom ranges: 10, 20, 30, 60, 120, 240, and 480 feet and 5, 10, 20, 30, 50, 100, and 150 meters. Zoom - Manual Operation To operate the zoom feature when the unit is in the manual mode, first press the menu key. Then press the down arrow key in the RANGE/ZOOM menu to place the unit in the zoom mode. The zoom size menu automatically appears next. You can change the zoom size by pressing the up or down arrows. After you select the desired zoom size, press the menu key until the MOVE ZOOM menu appears. This menu lets you move the zoom window up or down in one foot increments by pressing the arrow keys. Thus, you can move the zoom window up towards the surface, down to the bottom, or anywhere in between. The window stays where you put it. It doesnt track the bottom signal. To turn the zoom feature off, press the menu key until the RANGE/ZOOM menu appears. Now press the up arrow key. This switches the unit into the range mode, which turns the zoom feature off.
SENSITIVITY The sensitivity menu lets you control the units ability to pick up echoes. A low sensitivity level excludes much of the bottom information, fish signals, and other detail. High sensitivity settings lets you see features, but it can also clutter the screen with noise and other unwanted signals. Typically, the best sensitivity level shows a good, solid bottom signal with grayline. This sonar unit adjusts the sensitivity level to keep a solid bottom signal on the screen. It adds a little extra when its in the automatic mode. This gives it the capability to show fish and other detail. However, situations occur where it becomes necessary to increase or decrease the sensitivity level. Typically, this occurs when you wish to see more detail, so you need to increase the sensitivity. The procedure to adjust it is the same whether the unit is in the automatic or manual mode. To change the sensitivity level, first press the menu key until the sensitivity menu appears. If the unit is in automatic, the menu shows AUTO SENS. Otherwise, the menu shows MAN SENS. Now press the up arrow key to increase the sensitivity, the down arrow to decrease it. The percentage of sensitivity in use shows in this menu. Echoes scrolling onto the screen will also show the effects of the sensitivity change. If you reach the maximum or minimum sensitivity level, a tone sounds alerting you to the limits. After youve adjusted the unit to the desired sensitivity level, press the PWR key to clear the display. If you wait a few seconds, it will automatically clear.
GRAYLINE Grayline lets you distinguish between strong and weak echoes. It paints gray on targets that are stronger than a preset level. This shows the difference between a hard or soft bottom, large fish versus smaller ones, or rocks and brush on the bottom. For example, a soft, muddy, or weedy bottom returns a weaker signal which shows a narrow or no gray line. A hard bottom returns a strong signal that causes a wide gray line. If you have two targets of equal size, one with gray and the other without, the target with gray is the stronger echo. This helps distinguish fish from structure, or the larger fish from a smaller one.
Grayline is adjustable. Since it shows the difference between strong and weak echoes, changing the level may require a different sensitivity setting. To change the Grayline level, first press the MENU key until the Grayline menu appears. Now press the up arrow key to increase the level, the down arrow to decrease it. The percentage of Grayline now in use shows in this menu. Echoes scrolling onto the screen will also show the effects of the Grayline change. If you reach the maximum or minimum level, a tone sounds alerting you to the limits. The level chosen by the unit when its first turned on is usually adequate for most conditions. Experiment with your unit to find the Grayline setting thats best. FISH ID FEATURE The Fish ID feature identifies targets that meet certain conditions as fish. The microcomputer analyses all echoes and eliminates surface clutter, thermoclines, and other undesirable signals. In most instances, remaining targets are fish. The Fish ID feature displays symbols on the screen in place of the actual fish echoes. There are three symbol sizes: small, medium, and large. These show the relative size between targets. In other words, it displays a small fish symbol when it thinks a target is a small fish, a medium fish symbol on a larger target, etc. The microcomputer is sophisticated, but it can be fooled. It can't distinguish between fish and other suspended objects such as turtles, submerged floats, air bubbles, etc. Individual tree limbs extending outwards from a group of limbs are the hardest objects for the Fish ID feature to distinguish from fish. You may see Fish ID symbols on the screen when, in fact, there are no fish. Practice with the unit when the Fish ID feature is on and off to become more familiar with Fish ID. When the unit is first turned on, the Fish ID feature is automatically turned on, also. To turn it off, press the menu key until the Fish ID features menu appears as shown at right, then press the down arrow key. To turn it back on, repeat the above steps, but press the up arrow key instead.
The Fish ID feature cant be used when the unit is in the manual mode. If you turn the automatic feature off, the Fish ID feature will automatically be turned off, also. FISH TRACK This unit automatically displays the depth of a target when the Fish ID feature places a fish symbol on the screen as shown below. This feature is automatically enabled when the sonar unit is turned on. To turn it off or on again, press the MENU key repeatedly until the Fish Track menu appears as shown below. Now press the down arrow key to turn it off. Remember, Fish ID must be on in order to use the Fish Track feature.
TARGETTRACK (StrataView Only) The StrataView has the unique capability to "see" targets not only straight down, but also to the right and left, thanks to the BroadView transducer. This transducer has three elements: left, right, and down. The StrataView uses all three elements to display targets between the surface and the bottom. Targets are shown as Fish ID symbols. This feature also shows the depth of the target directly above the fish symbol. In the screen shown at right, there is one symbol from the right element at 22 feet, one from the left element at 29 feet, and one from the center element at 16 feet. The TargetTrack feature identifies fish symbols coming from the right element with a "R" in front of the symbol's depth. A "L" identifies symbols from the left element. No letter identifies fish symbols from the center element. The bottom signal and the
digital depth display are read from the center element only. To turn the TargetTrack feature off, simply press the MENU key until its menu appears as shown at right, then press the down arrow key.
CHART SPEED The rate echoes scroll across the screen is called the chart speed. Its adjustable by pressing the menu key until the chart speed menu appears. Chart speed is set to maximum when the unit is first turned on. To decrease it, press the down arrow key. Press the up arrow key to increase the speed again. The percent numbers in the Chart Speed menu box shows the speed. Echoes scrolling onto the screen will also show the effects of the change. If you reach the maximum or minimum level, an warning tone sounds. To stop the chart, first clear any menu from the screen by pressing the PWR key. You cant stop the chart while a menu is displayed. Now press the up arrow key. The chart freezes and the word STOP appears at the top right portion of the screen. To start the chart, press the up arrow key again.
DISPLAY MODE The Strata 128 has three different screen modes. The Strata 128 Plus and Strataview both have eight modes. To change modes, press the MENU key until the DISP MODE (Display Mode) menu appears. Then press the up or down arrow keys until the desired mode number appears. The modes are as follows:
STRATA 128 and STRATA 128 Portable ONLY CHT 1 (Chart #1) This is the default mode used when the unit is first turned on. It has the following features: 1. Automatic On 2. Fish ID Feature On 3. Digital Depth Display On
CHT 2 (Chart #2) This is the High Speed Scroll mode. It shifts the chart speed into high gear, scrolling echoes at a high rate. It has the following features: 1. Automatic Off 2. Fish ID Feature Off 3. Digital Depth Display Off
DIG 1 (Digital #1) This is the digital only screen. It shows the digital depth display at the top of the screen in very large numbers. The shallow and deep alarm settings are displayed beneath the digital depth. No chart shows on this screen.
STRATA 128 PLUS and STRATAVIEW ONLY CHT 1 (Chart #1) This is the default mode used when the unit is first turned on. It has the following features: 1. Automatic On 2. Fish ID Feature On 3. Digital Depth Display On
CHT 2 (Chart #2) Same as Chart-1, but with water temperature added.
CHT 3 (Chart #3) Same as Chart-1, but with speed added.
STRATA 128 PLUS and STRATAVIEW ONLY (cont.) CHT 4 (Chart #4) Same as Chart-1, but with water temperature and speed added.
CHT 5 (Chart #5) This is the High Speed Scroll mode. It shifts the chart speed into high gear, scrolling echoes at a high rate. It has the following features: 1. Automatic Off 2. Fish ID Feature Off 3. Digital Depth Display Off
DIG 1 (Digital #3) This is the digital only screen. It shows the digital depth display at the top of the screen in very large numbers. The shallow and deep alarm settings are displayed beneath the digital depth. No chart shows on this screen.
STRATA 128 PLUS and STRATAVIEW ONLY (cont.) DIG 2 (Digital #2) Digital depth, water temperature, speed, and distance log (odometer) show on this page. To reset the log, turn the unit off and back on again.
DIG 3 (Digital #3) Digital depth, water temperature, T-2 temperature, and T-3 temperature all show on this screen.
Temperature Probe Select You can select the temperature probe's output that shows on Chart 2 and 4, when more than one temperature probe is connected to a Strata 128 Plus or a StrataView. To do this, press a MENU key until the "TEMP PROBE" menu appears as shown at right. Now press the up or down arrow keys until the desired probe appears. Press the PWR key to erase the menu.
ALARMS FISH ALARM The Fish Alarm sounds a tone when a fish symbol appears on the screen. To use the fish alarm, press the menu key until the FISH ALARM menu appears on the screen. Now press the up arrow key to turn the alarm on. Repeat the above steps to turn the fish alarm off.
DEPTH ALARMS The depth alarms are triggered only by the bottom signal. No other echoes will activate these alarms. The depth alarms consist of a shallow and deep alarm. The shallow alarm sounds an alarm tone when the bottom goes shallower than the alarms setting. The deep alarm sounds a tone when the bottom goes deeper than its setting. Both alarms adjust the same, although through different menus. Shallow Alarm To set the shallow alarm, press the menu key repeatedly until the SHAL ALARM menu appears. Press the down arrow key to increase the shallow alarm's depth setting, the up arrow key decreases it. The number in the shallow alarms menu box shows the current shallow alarm setting. When the number reaches the desired setting, release the arrow key. When the bottom depth goes shallower than the alarms setting an alarm tone sounds. At the same time the alarm sounds, a message box appears on the screen as shown at right. Press the up arrow key to silence the alarm. This will turn the alarm sound off until the shallow alarm is triggered again. To turn the alarm off, press the menu key until the shallow alarm menu appears. Then press the up arrow key until the word OFF appears.
Deep Alarm The deep alarm adjusts the same as the shallow alarm. Use the DEEP ALARM menu to adjust the deep alarm. When the bottom signal goes deeper than the setting, an alarm tone sounds. LIGHTS The display is backlighted for night use. To turn the backlights on or off, press the menu key repeatedly until the BACK LIGHT menu appears. Now press the up arrow to turn the lights on or the down arrow to turn them off.
FEET/METER This unit can show the depth in feet or meters. When it is in the metric mode, all depth readings, ranges, zooms, and alarm settings are in meters. When it's in the feet mode, all of the above settings are in feet. To change from feet to meters or vice-versa, press the menu key until the FEET/METER menu appears. Press the down arrow key to switch to metric, the up arrow to switch to feet. Displays show in feet when the unit is first turned on. The menu will clear automatically after a few seconds or you can press the PWR key to clear the screen.
DISPLAY CONTRAST The units display contrast is adjustable to suit different lighting conditions. This will help you see the screen from different angles, or at various times of the day. To adjust the contrast, press the menu key until the DARK/LIGHT menu appears. To decrease it, press the down arrow key. Press the up arrow key to increase the contrast. The bar graph in the Dark/Light menu box
shows a graph of the contrast. The screen will also show the effects of the change. If you reach the maximum or minimum level, a tone sounds alerting you to the limits. The menu will clear automatically after a few seconds or you can press the PWR key to clear the screen.
ASP (Advanced Signal Processing) ASP is a program embedded in the computer that is specifically designed to eliminate noise. It continually monitors the signals from the receiver, determines which echoes are noise and rejects them. This allows true target echoes to display on the screen with a minimum of clutter. This feature is especially useful since it typically lets you operate the boat at all speeds without adjusting the sensitivity or other controls. When the unit is first turned on, ASP is enabled. To turn ASP off, press the menu key repeatedly until the ASP menu appears. Now press the up arrow to turn it on or the down arrow to turn it off. The menu will clear automatically after a few seconds or you can press the PWR key to clear the screen.
SIMULATOR A simulator is built inside that can show a simulated bottom signal with fish signals. All features of the unit work normally when the simulator is in use. You can change the range, zoom, and use the alarms as desired. To use the simulator, press the menu key repeatedly until the SONAR SIM menu appears. Now press the up arrow to turn it on. Repeat the above steps to turn it off, or turn the unit off and back on again.
TROUBLESHOOTING - IMPORTANT INFORMATION! If your unit is not working, or if you need technical help, please use the following troubleshooting section before contacting the factory customer service department. It may save you the trouble of returning your unit. Unit wont turn on: 1. Check the power cables connection at the unit. Also check the wiring. 2. Make certain the power cable is wired properly. The red wire connects to the positive battery terminal, black to negative or ground. 3. Check the fuse. 4. Measure the battery voltage at the units power connector. It should be at least 11 volts. If it isnt, the wiring to the unit is defective, the battery terminals or wiring on the terminals are corroded, or the battery needs charging. Unit freezes, locks up, or operates erratically: 1. Electrical noise from the boats motor, trolling motor, or an accessory may be interfering with the sonar unit. Rerouting the power and transducer cables away from other electrical wiring on the boat may help. Route the sonar units power cable directly to the battery instead of through a fuse block or ignition switch 2. Inspect the transducer cable for breaks, cuts, or pinched wires. 3. Check the transducer and power connector. Make certain it's securely plugged in to the unit. Weak bottom echo, digital readings erratic, or no fish signals: 1. Make certain transducer is pointing straight down. Clean the face of the transducer. Oil, dirt, and fuel can cause a film to form on the transducer, reducing its effectiveness. If the transducer is mounted inside the hull, be sure it is shooting through only one layer of fiberglass and that it is securely bonded to the hull. Do NOT use RTV silicone rubber adhesive or MarinetexTM. 2. Electrical noise from the boats motor can interfere with the sonar. This causes the sonar to automatically increase its Discrimination or noise rejection feature. This can cause the unit to eliminate weaker signals such as fish or even structure from the display. 3. The water may be deeper than the sonars ability to find the bottom. If the sonar cant find the bottom signal while its in the automatic mode,
How to Obtain Service
(Canadian Customers Only)
We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you need service or repairs, contact the Eagle Factory Customer Service Department at the toll-free number listed below. A technician may be able to solve the problem and save you the inconvenience of returning your unit. You will be asked for your unit's serial number.
Canada Only. Monday through Friday 8:00 A.M. - 8:00 P.M. Central Time.
(International Customers Only)
If you need service or repairs, contact the dealer in the country you purchased your unit. WARRANTY REPAIR WILL BE HONORED ONLY IN THE COUNTRY UNIT WAS PURCHASED. Please follow the shipping instructions shown below on this page if you have to mail your unit to the dealer. For proper testing, repair, and service, send a brief note with the product describing the problem. Be sure to include your name, return shipping address, and a daytime telephone number.
When sending a product for repair, we recommend you do the following: 1. Always use the original shipping container and filler material the product was packed in when shipping your product. 2 Always insure the parcel against damage or loss during shipment. Eagle does not assume responsiblity for goods lost or damaged in transit. 3. For proper testing, repair, and service, send a brief note with the product describing the problem. Be sure to include your name, return shipping address, and a daytime telephone number.
Accessory Ordering Information
To order accessories such as power cables or transducers, please contact: 1. Your local marine dealer. Most quality dealers that handle marine electronic equipment should be able to assist you with these items. Consult your local telephone directory for listings. 2. Canadian customers only can write: Lowrance/Eagle Canada, 919 Matheson Blvd., E. Mississauga, Ontario L4W2R7 or fax 416-629-3118
We back your investment in quality products with quick, expert service and genuine Eagle replacement parts. If you're in the United States and you have questions, please contact the Factory Customer Service Department using our toll-free number listed below. You must send the unit to the factory for warranty service or repair. Please call the factory before sending the unit. You will be asked for your unit's serial number. Use the following tollfree number:
U.S.A.only. Monday through Friday 8:00 A.M. - 8:00 P.M. Central time, except holidays.
Your unit is covered by a full one-year warranty. (See inside for complete warranty details.) If your unit fails and the failure is not covered by the original warranty, Eagle has a flat-rate repair policy that covers your unit and accessories packed with the unit at the factory. There is a 180-day warranty on all non-warranty repairs from the factory, which is similar to the original warranty, but is for 180 days rather than one year. For further details, please call us at the above number.
Eagle Electronics may find it necessary to change or end our shipping policies, regulations, and special offers at any time. We reserve the right to do so without notice.
To order accessories such as power cables or transducers, please contact:
1) Your local marine dealer. Most quality dealers that handle marine electronic equipment should be able to assist you with these items. Consult your local telephone directory for listings. 2) LEI Extras, Inc. P.O. Box 129 Catoosa, OK 74015-0129 or call 800-324-0045 (USA orders only.)
Remember, non-warranty repairs are subject to Eagle's published flat-rate charges and 180-day warranty.
EAGLE ELECTRONICS PO BOX 669 CATOOSA OK 74015
LITHO IN U.S.A.
VSX-D511 AQV12awan Kd-s13 TL773C VL-NZ100U GC3340 EOS 5D Heroes L1980Q SS-S3 Yaourtiere VR620 REX TT9E VL-E78E 26PF5321D SR-70 MW302X Olympus E-30 IDP-3551 Piano MZ-E33 Thinkpad A21E EWL20S5 CGA5722-00 Century 1994 K750I SE-50 EHC641X ES-6000HS LMS-525C DF PS50C7000YW GB 102 RC-50 L100 RED Samsung R530 UR17E Optra M410 Adapter Discovery I LE32B460b2W Yamaha FS1R MP-25 DV8700C SS-SR101 MF-FM37s4K IV-040 21PT134B SX200 IS UN26C4000PD 2243EW DSC-T100 Nakamichi CR7A Z250I ASF66025 Samba TX-36PL35F HR-J768 Conectiv Olympus Clean CDX-CA900 Webcam 5500 KCT300 Zoom G2 CQ-C5301U FLS462C TL-WN811N Coffee DRX5 Urc-6800 Sport Bonneville T100 D-EJ001 Vectis 3000 SC-25 WF-T7014PP HT-Q100 XL 335 Lafinion 82W VP-DC565WI Review MDR-IF130K TAX-exchange DVD-S530 CDM-9801 Powerlite 51C D-tracker 125 DV-RW65 NV-MX2000 LA40C650l1M Metadec2 FD630U AN110B-JD I915GMM-hfs0501A Atlanta CD85 RM329P Abit IB9 Ec 2040 VP-MX25E Seiko 7D48 ES 50 CMT-LX20I
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101