Spray Stations HVLP Paint Sprayers
Earlex Inc, 8261 Hwy 73, Suite F, Stanley, N.C. 28164, USA Tel: 7889 Fax: 7849 Toll Free 888-Email: enquiries@earlex.com Website: www.earlex.com
Earlex Spray Stations are the best way to paint many items both inside or outside.
Ideal for large or detailed jobs. Earlex Spray Stations can spray a wide range of different materials from oil based to water based paints. Earlex Spray Stations have an air jacket on the gun which ensures minimal overspray. This means you will save time in preparation, complete the job faster and get a great finish in the process. Youll also save money as the high paint transfer efficiency will make your paint go further. Faster than a brush or roller. Spray inside or outside. Adjustable fan width - spray detailed jobs or large areas. Clean up the gun in seconds, turbine requires no maintenance. Optional tips/needles available Portable so you can use in many areas.
Project size/ type Paint types
Small to Medium-light duty
Low thickness such as Dyes, Inks, Wash Primers, Solvents, Stains, Lacquers, Polyurethanes, Acrylics, Lubricants,

HV3000

Small to Large-Medium duty
Low Medium thickness such as Dyes, Inks, Wash Primers, Solvents, Stains, Lacquers, Polyurethanes, Acrylics, Lubricants, Enamels, Epoxies, Urethanes, Sealers, Latex (thinned), Primers

HV5000

Small to Large- heavy duty
Fluid Tips included Gun Type & Capacity Fan width Fan Adjustment Hose length Turbine Type Storage Output (gal/hr) CFM PSI
2.0mm (Brass) Medium Duty/ 1 qt 1-6 Unscrew and set 8 Taper Fan - Ametek None 1.1
2.0mm (Brass) Medium Duty/ 1 qt 1-6 Unscrew and set 9 Taper Fan - Ametek Gun, Hose & Power cord all store on board 9.1.5
2.0 (Stainless) Heavy Duty Pro-gun / 1qt with Teflon coated interior 1-12 Push and click 13 Taper Fan - Ametek Gun, Hose & Power cord all store on board 2

HV500/HV1900/HV3000 Accessories
Spare spray gun for HVLP 500/1900/3000
For HVLP 500 and HVLP 3000 Series Includes spray gun with One (1) Quart Paint Pot Includes standard 2.0 mm (0.08 in.) brass needle and fluid tipGood to have a spare if painting a variety of jobs or different colors on the same job
2.5 mm Brass Needle for HVLP 500/1900/3000
Part # HVACC25R Needle Tip Size 2.5 mm (0.10 in.) Ideal for a coarse finish and thin to thick viscosity materials.
1.0 mm Brass Needle for HVLP 500/1900/3000
Part # HVACC10R Needle Tip Size 1.0 mm (0.04 in.) Ideal for an ultra fine finish and thin viscosity materials, especially water based finishes.
Spare Paint Pot for HV500/ HV1900/HV3000 spray gun
For HV500 and HV3000 Spray Gun One (1) quart capacity Ideal spare if painting a variety of jobs Allows storing pre-mixed paint in greater volumes Allows storing different colored paints Allows storing unused paint while spraying another job
1.5 mm Brass Needle for HVLP 500/1900/3000
Part # HVACC15R Needle Tip Size 1.5 mm (0.06 in.) Ideal for a fine finish and thin/medium viscosity materials.
HVLP Spray Gun Cleaning Kit for All HVLPs
For ALL HVLP Series Spray Stations Guns Assures Preventive Maintenance for Longer Life Comes With Five (5) Brushes and Two (2) Nozzle Cleaners for Fast, Efficient Clean-up Assures Perfect Performance Every Time
2.0 mm Brass Needle for HVLP 500/1900/3000
Part # HVACC20R Needle Tip Size 2.0 mm (0.08 in.) Ideal for a quality finish and medium/ thick viscosity materials.
HVLP Viscosity Cup for All HVLPs
For ALL HVLP Series Spray Stations Guns The viscosity cup is used to indicate if a product is thin or thick. Materials should be tested before spraying to see if thinning is required. The correct viscosity is important to ensure the paint atomizes correctly and sprays evenly.
Didn't find what you were looking for Contact us Toll-free: 1-888-783-2612 Email: questions@earlex.com 8:30 a.m.-5:30 p.m. EST Mon. - Fri.