Edimax BR-6204WG Manual
Edimax BR-6204WG, size: 2.9 MB
Here you can find all about Edimax BR-6204WG like manual and other informations. For example: repeater, driver, ip, reset, default password, setup, review, firmware.
Edimax BR-6204WG manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Edimax BR-6204WG please write about it to help other people. [ Report abuse or wrong photo | Share your Edimax BR-6204WG photo ]
Edimax BR 6204wg Point to Point
User reviews and opinions
|moby_||12:44pm on Sunday, July 18th, 2010|
|Quick start guide made basic set up straight forward. Supports WPA encryption for Wireless, firewall, port forwarding etc Nothing springs to mind Quick start guide made basic set up straight forward. Supports WPA encryption for Wireless, firewall, port forwarding etc Nothing springs to mind|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
How to apply WISP mode in the AP-router?
Author: Longcent (2006-6-16)
This FAQ is applied to the below Edimax model and operation systems:
BR-6204Wg / BR-6304Wg. Windows 2000/XP.
This FAQ is for guiding you to configure the Edimax AP-Router to connect with the outdoor AP deployed by the WISP for sharing wireless Internet broadband to multiple wired or wireless PCs, as shown in the below figure.
1. Set your wire network card to obtain IP automatically.
1. 1 Click Start in the task bar and
select Control Paned.
Copyright 2007 EDIMAX Technology Co., Ltd. All Rights Reserved
1. 2 Click Switch to Classic View
on the left top.
1.3 Double-click the Network Connection icon.
1.4 Rick-click the Local Area Connection and select Properties.
1.5 Select Internet Protocol and click Properties.
1.6 Ensure the option Obtain an IP automatically and Obtain DNS address automatically is checked and click OK.
2. Edimax Router configuration:
2.1 Enter the default IP of the router.
2.2 Enter the default user name admin and password 1234 to log on.
2.3 Click WAN Type, Wireless ISP, and Apply button.
2.4 Click Continue button.
2.5 Click Site Survey button.
2.6 Once the Site survey button is clicked, the pop-up window will show you all the nearbe APs. Please click the name of the AP deployed by your WISP. In this example, we choose ISP-2 and click Done button.
2.7 Click Dynamic IP, and Apply button.
2.8 Click Apply button for rebooting the router.
2.9 Check whether the IP addresses assigned by the WISP is logged in the below table by click Status Info and Intenet Connection.
If these is an IP address shown in the step 2.9 table, it indicates that the router is connected to your ISP, and you are able to access the Internet.
MIMO / Wireless LAN / Fast Ethernet
Broadband Router Series
BR-6218Mg / BR-6215SMg / BR-6215SRg BR-6304Wg / BR-6204Wg / BR-6104KP / BR-6104K
Quick Installation Guide
Version 2.0 / October 2006
Multi-Languages QIG on the CD
esk: eskho prvodce rychlou instalac naleznete na piloenm CD s ovladai Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD Espaol: Incluido en el CD el G.R.I. en Espaol.
dans le CD
Franais: Veuillez trouver lfranais G.I.R ci-joint
Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar teleptsi tmutat megtallhat a mellkelt CD-n Nederlands: De nederlandse Q.I.G. treft u aan op de bijgesloten CD Polski: Skrcona instrukcja instalacji w jzyku polskim znajduje si na zaczonej pycie CD Portugus: Includo no CD o G.I.R. em Portugues : Q.I.G. po CD Trke: rn ile beraber gelen CD iinde Trke Hzl Kurulum Klavuzu'nu bulabilirsiniz
Copyright by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this company This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Any software described in this manual is sold or licensed "as is". Should the programs prove defective following their purchase, the buyer (and not this company, its distributor, or its dealer) assumes the entire cost of all necessary servicing, repair, and any incidental or consequential damages resulting from any defect in the software. Further, this company reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation to notify any person of such revision or changes. All brand and product names mentioned in this manual are trademarks and/or registered trademarks of their respective holders.
Linux Open Source Code
Certain Edimax products include software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). Please see the GNU (www.gnu.org) and LPGL (www.gnu.org) Web sites to view the terms of each license. The GPL Code and LGPL Code used in Edimax products are distributed without any warranty and are subject to the copyrights of their authors. For details, see the GPL Code and LGPL Code licenses. You can download the firmware-files at http://www.edimax.com.tw under "Download" page.
Instructions for using the router to share the Internet with multiple PCs. (Power on the Modem and the Router.)
1. Connect the Ethernet cable from the routers WAN port to the LAN port of the modem.
2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket on the PC.
3. Check to make sure the routers LINK LED is lit; to confirm the cable connections are made correctly.
PC LAN IP Configuration
1. Configure the PC LAN setting to automatically obtain an IP address from the router by following below steps. Click Start in the task bar then select the Control Panel to open it.
Click Switch to Classic View on the left top to see more setting icon
Find an icon Network Connection then Double-Click to open the network connection setting.
You will see an icon Local Area Connection, click the icon then Right-Click the mouse to open the sub-menu and select the Properties for setting the IP.
Select the Internet Protocol (TCP/IP) then click the Properties
Ensure the parameter marked in blue are checked in Obtain an IP address automatically and Obtain DNS server address automatically then press OK to close.
2. Power on sequence for the networking devices and PC. Firstly, power off the modem followed by router and PC. Second, power on the modem. Third power on the router followed by PC for next step.
Router Configuration PPPoE
Note: Please do not run the PPPoE software; otherwise the Internet connection for the router may fail. 1. Enter the routers default IP address: 192.168.2.1 into your PCs web browser and press enter.
2. The login screen below will appear. Enter the User Name and Password and click OK to login. The default User name is admin and the Password is 1234,
Note: Its highly recommended to change and save Router's log-in settings in another location.
3. The main page will appear, click Quick Setup Following example is for PPPoE WAN setting.
4. Select (GMT) Greenwich Mean Time: (your country or city) then Click Next button.
5. Select PPPoE xDSL, the system will move into next step
6. Enter the User Name and Password that ISP provided and leave the others. (The Service Name can be blank) and click OK to save the setting then reboot the router
7. After reboot, your router is now ready for Internet connection. Note: Check the manual on the CD for more Internet connection type and other setting details
Router Configuration - Cable Modem
1. The following example is for U.K. Click on Quick Setup.
2. Select (GMT) Greenwich Mean Time : London. Click Next button.
3. Select Cable Modem, the system will move into next step
4. Enter Host Name and MAC Address. (The Host Name can be blank) The MAC Address is provided by ISP (e.g. NTL) or click Clone Mac Address button if youre using the computers MAC Address. Confirm with your ISP about MAC Address used, Click OK button to save the settings then reboot the router.
5. After reboot, your router is now ready for Internet connection. Note: Check the manual on the CD for more Internet connection type and other setting details
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1. Reorient or relocate the receiving antenna. 2. Increase the separation between the equipment and receiver. 3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio technician for help.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the authority to operate equipment.
Federal Communications Commission (FCC) Radiation Exposure Statement
This equipment complies with FCC radiation exposure set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 2.5cm (1 inch) during normal operation.
Federal Communications Commission (FCC) RF Exposure Requirements SAR compliance has been established in the laptop computer(s) configurations with PCMCIA slot on the side near the center, as tested in the application for Certification, and can be used in laptop computer(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. Use in other devices such a PDAs or lappads is not authorized. This transmitter is restricted for use with the specific antenna(s) tested in the application for Certification. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
R&TTE Compliance Statement
This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE) The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.
This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at all times to ensure the safe use of the equipment.
EU Countries Intended for Use
The ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Countries not intended for use
Doro 915C Sh-1060 AJ3650 12 Models MHC-RXD6AV Driver EW1144F KD-R801 2-23 RE Edition 3 Timex W-1 DSC-W380 Livebox Security DAV-DZ270K TDS302T Asus MEB MX-3500N Navigon 2100 MX 3000 SX-PX224 WA50120 Republic II Mediadisk ZX DVP-PR30 AV220 System DPP-FP60BT Default Password Primera SF-560R-XEF XE-A505 DM 90 300 RC ML-4600 EKC60752X 230V MD1063 WD-1023C Giulietta Mansion Gabbana DCB-B263Z EXT-118 Granite Medallist Studio 11 LG C251 Husky FS3 Ip Ultralight DX1 PT-51HX42F Review Drive UR2-CBL-cv04 DVD-RV32 Tester Signature AT-160 Le40C670m1Q Flashpaper FIE64F 63R VGC-LA50B VGN-NS21m W Flymo L400 Camera TY-WK103pv9 WM3431HW Voip8411B 4170AF AX-500 42LH30 AG925EFY Ketron XD9 104AR XDM6825 EX-A5 Motorola Dext LT 100H HP5233 12 5 Repeater WD-1485RD Firmware Setup DSC-F55E SGH-F490 SGH D980 CCD-TRV12E VR9261 3274-6 KA CDI-300 Kansas DJ51 Fahrenheit BV7985 Revelation Poulan 2350 Pyramid CR66 28 II KLV-32S400A DPF-A710 DXZ868RMP PL207 KX-TCD300CX EMS26405X Z33 WP A7N266C HR-S8600 Reset
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101