Anleitung BT-MG 135_SPK1:_

23.08.2007

11:03 Uhr

Seite 1

Bedienungsanleitung Schleif- und Gravur-Set Operating Instructions for Grinding and Engraving Set Mode demploi du kit de ponage et de gravure universel Istruzioni per luso per il set di levigatura e incisione Betjeningsvejledning Slibe- og graveringsst Hasznlati utasts Csiszol - s gravur - szet Upute za uporabu kompleta za bruenje i graviranje Uputstva za upotrebu kompleta za bruenje i graviranje Nvod k pouit Brusn a ryc sada Nvod na obsluhu Brsna a gravrovacia sprava

Art.-Nr.: 44.191.75

I.-Nr.: 01017

Seite 2

WARNUNG - Zur Verringerung des Verletzungsrisikos Bedienungsanleitung lesen Caution - Read the operating instructions to reduce the risk of inquiry Avertissement Lisez ce mode demploi pour diminuer le risque de blessures Avvertimento Per ridurre il rischio di lesioni leggete le istruzioni per luso
Advarsel Ls betjeningsvejledningen for at reducere risikoen for personskade Figyelmeztets Srls veszlynek a lecskkentshez olvassa el a hasznlati utastst Bf Upozorenje proitajte upute za uporabu kako bi se smanjio rizik ozljeivanja 4 j W Upozorenje Proitajte uputstva za upotrebu kako bi se smanjio rizik od povreda Varovn Ke snen rizika zrann si pest nvod k obsluze Upozornenie - Aby ste znili riziko poranenia, pretajte si nvod na obsluhu

Seite 3

Seite 4

b a a 3

Seite 5

Seite 10

Important!
When using the equipment, a few safety precautions must be observed to avoid injuries and damage. Please read the complete operating instructions and safety regulations with due care. Keep this manual in a safe place, so that the information is available at all times. If you give the equipment to any other person, hand over these operating instructions and safety regulations as well. We cannot accept any liability for damage or accidents which arise due to a failure to follow these instructions and the safety instructions.

3. Layout (Fig. 3)

1 ON/OFF switch 2 Speed controller 3 Collet chuck nut 4 Locking knob for collet chuck 5 Cover

4. Proper use

The Grinding and Engraving Set is designed to perform drilling, grinding, deburring, polishing, engraving, cutting, milling and cleaning jobs on wood, metal and plastic in model-making, workshop and household applications. Use the tool and accessories only for those applications described. The machine is to be used only for its prescribed purpose. Any other use is deemed to be a case of misuse. The user / operator and not the manufacturer will be liable for any damage or injuries of any kind caused as a result of this. Please note that our equipment has not been designed for use in commercial, trade or industrial applications. Our warranty will be voided if the machine is used in commercial, trade or industrial businesses or for equivalent purposes.

1. Safety regulations

The corresponding safety information can be found in the enclosed booklet.
CAUTION! Read all safety regulations and instructions. Any errors made in following the safety regulations and instructions may result in an electric shock, fire and/or serious injury. Keep all safety regulations and instructions in a safe place for future use.
2. Items supplied (Fig. 1 / 2)
Case Grinding wheels Grinding belts Flap wheel / diamond cutting wheel / grinding heads / clamping spindles 5 Cutters / diamond-tipped cutters / sleeves 6 Felt polishers / grinding wheels / arbors 7 Bristle brushes / wire brushes / bits / collet chuck key / whetstone 8 Drive unit 9 Grinding pins 10 Polishing wheels / polishing paste / grinding wheels 11 Diamond-tipped cutters 12 Cutting-off wheels 13 Flexible shaft 14 Table clamp 15 Telescopic stand rod

5. Technical data

Operating voltage of the drive unit: 230V ~ 50 Hz Power input: 135 W Idle speed n0: 10,000 - 35,000 min-1 Clamping range: Weight of tool (without packing): Sound pressure level LpA: Sound power level LWA: Vibration ahv: Totally insulated 3.2 mm 0.61 kg 70.1 dB 83.1 dB < 2,5 m/s2 II /
6. Before starting the equipment
6.1. Taking out the accessories (Fig. 4) Before you take out the accessories, you must remove the two transportation braces. To do so, pull each transportation brace (a) out of the guide. Then tilt the accessory holder (b) forwards.

Seite 11

6.2. Inserting the various tools (Fig. 3)
Before inserting a tool (and before each tool
change) switch of the drive unit and pull the power plug. 1. Press the locking knob (4) and turn the collet chuck until the bolt locks into place. 2. Undo the collet chuck nut (3). 3. Insert the required tool into the sleeve and tighten the collet chuck nut (3). 6.3. Installing the flexible shaft (Figs. 3 / 5) Unscrew the cover (5) from the front of the equipment. Undo the collet chuck nut (3). Insert the internal schaft (a) of the flexible shaft into the collet chuck (3). Tighten the collet chuck nut (3). Now tighten the ring (b) on the multi-tool. 6.4 Using the stand (Fig. 6) Fit the stand to a workbench The stand is adjustable in height and can be adjusted as shown in Fig. 6. The multi-tool can now be attached to the stand.
7.4 Tips Exert only moderate pressure on the workpiece and allow it to be processed at uniform speed. You will not finish your work sooner by exerting heavy pressure. On the contrary, heavy pressure will cause the drive unit to slow down or stop and will overload the motor. For your own safety, use a vise or screw clamp to secure small workpieces.

8. Accessories

8.1. Accessories (Fig. 7 / Fig. 1; Item 2-3) 1 Grinding wheel 2 Grinding belt (small) 3 Grinding belt (large) 8.2. Accessories (Fig. 8 / Fig. 1; Item 12) 1 Cutting wheel (large) 2 Cutting wheel (small) 8.3. Accessories (Fig. 9 / Fig. 1; Item 11) 1 Diamond-tipped cutter (cylindrical, large) 2 Diamond-tipped cutter (cylindrical, small) 3 Diamond-tipped cutter (pointed) 4 Diamond-tipped cutter (ball-shaped) 8.4. Accessories (Fig. 10 / Fig. 1; Item 10) 1 Grinding wheel 2 Felt polishing wheel 3 Emery wheel 4 Fabric polishing wheel 5 Polishing paste 8.5. Accessories (Fig. 11 / Fig. 1; Item 9) 1-5 Grinding pins 8.6. Accessories (Fig. 12 / Fig. 1; Item 4) 1 Diamond cutting wheel 2 Clamping spindle for diamond cutting wheel 3 Grinding head for grinding belts (small) 4 Grinding head for grinding belts (large) 5 Flap wheel 8.7. Accessories (Fig. 13 / Fig. 1; Item 5) 1 Sleeve 2 Cutter 3 Diamond-tipped cutter (ball-shaped) 8.8. Accessories (Fig. 14 / Fig. 1; Item 6) 1 Arbor for felt wheels 2 Arbor for grinding wheels 3 Felt polishing wheel 4 Felt polishing wheel 5 Grinding wheel 11

7. Using the tool for the first time
Make sure that the drive unit is switched off. Check that the mains voltage specified on the rating plate of the power supply unit is the same as your mains supply. Only then should you insert the plug of the power supply unit into a socket-outlet.
7.1. ON/OFF switch (Fig. 3) Switch on the drive unit with the power switch (1). 7.2. Speed selector (Fig. 3) The required speed can be set with the speed control (2). The correct speed depends on the tool used and the type of material being processed. 7.3 Directions for use With small milling cutters / grinding pins: Use a high speed. With large milling cutters / grinding pins: Use a low speed. Precision work / engraving: Hold the drive unit like a pen. Rough work: Hold the drive unit like a hammer.

Seite 12

8.9. Accessories (Fig. 15 / Fig. 1; Item 7) 1 Wire brush 2 Wire brush 3 Bristle brush 4 Wire brush 5 Whetstone 6 Collet chuck 7 HSS bits 8 Bristle brush 8.10. Description of the accessories: Cutting disks: For cutting metal and plastic. Insert the cutting wheel onto the clamping spindle. Grinding pins: In various grinding head shapes. For grinding and deburring metal and plastic. HSS bits: For drilling work on non-ferrous metals, wood, plastic and printed circuit-boards. Grinding wheels: For cleaning and sharpening blades and tools. Insert the grinding wheel onto the clamping spindle. Grinding paper: For grinding and deburring wood and plastic. Polishing wheels / polishing pins / emery wheels: For polishing brass, tin, copper, etc. Also for use with polishing pastes. Whetstone: For sharpening tools. Wire brushes: For cleaning stone, metal, aluminium, etc. Grinding belts: For grinding word and plastic. Diamond-tipped cutters: For cutting and engraving ceramic, glass and other hard materials. Diamond cutting wheel: For cutting, separating, grinding and deburring materials, such as concrete, stone, china, ceramic, etc. Flap wheel: For grinding metal, word and plastic. For straight surfaces and contoured surfaces. 12 Collet chuck key For mounting accessory tools Sleeves: Various sizes for mounting different accessory tools. Cutters: For cutting plastic, wood and soft metal Bristle brushes For cleaning and polishing metal surfaces (i.e. cutlery, jewelry, etc.) Also for use with polishing pastes.
9. Cleaning, maintenance and ordering of spare parts
Always pull out the mains power plug before starting any cleaning work. 9.1 Cleaning Keep all safety devices, air vents and the motor housing free of dirt and dust as far as possible. Wipe the equipment with a clean cloth or blow it with compressed air at low pressure. We recommend that you clean the device immediately each time you have finished using it. Clean the equipment regularly with a moist cloth and some soft soap. Do not use cleaning agents or solvents; these could attack the plastic parts of the equipment. Ensure that no water can seep into the device. 9.2 Carbon brushes In case of excessive sparking, have the carbon brushes checked only by a qualified electrician. Important! The carbon brushes should not be rep laced by anyone but a qualified electrician. 9.3 Maintenance There are no parts inside the equipment which require additional maintenance. 9.4 Ordering replacement parts: Please quote the following data when ordering replacement parts: Type of machine Article number of the machine Identification number of the machine Replacement part number of the part required For our latest prices and information please go to www.isc-gmbh.info

Seite 13

10. Disposal and recycling
The unit is supplied in packaging to prevent its being damaged in transit. This packaging is raw material and can therefore be reused or can be returned to the raw material system. The unit and its accessories are made of various types of material, such as metal and plastic. Defective components must be disposed of as special waste. Ask your dealer or your local council.

11:04 Uhr

Seite 46

Konformittserklrung

k t p m O U q T B Q Z z erklrt folgende Konformitt gem EU-Richtlinie und Normen fr Artikel declares conformity with the EU Directive and standards marked below for the article dclare la conformit suivante selon la directive CE et les normes concernant larticle verklaart de volgende conformiteit in overeenstemming met de EU-richtlijn en normen voor het artikel declara la siguiente conformidad a tenor de la directiva y normas de la UE para el artculo declara a seguinte conformidade de acordo com a directiva CE e normas para o artigo frklarar fljande verensstmmelse enl. EUdirektiv och standarder fr artikeln ilmoittaa seuraavaa Euroopan unionin direktiivien ja normien mukaista yhdenmukaisuutta tuotteelle erklrer herved flgende samsvar med EUdirektiv og standarder for artikkel EC izjavljuje sljedeu uskladjenost s odredbama i normama EU za artikl. declar urmtoarea conformitate cu linia directoare CE i normele valabile pentru articolul. rn ile ilgili olarak AB Ynetmelikleri ve Normlar gereince aadaki uygunluk akla masn sunar. C l j A X W e 1. G 4 H E
ISC-GmbH Eschenstrae 6 D-94405 Landau/Isar
dichiara la seguente conformit secondo la direttiva UE e le norme per larticolo attesterer flgende overensstemmelse i henhold til EU-direktiv og standarder for produkt prohlauje nsledujc shodu podle smrnice EU a norem pro vrobek. a kvetkez konformitst jelenti ki a termkekre vonatkoz EU-irnyvonalak s normk szerint pojasnjuje sledeo skladnost po smernici EU in normah za artikel. deklaruje zgodno wymienionego poniej artykuu z nastpujcymi normami na podstawie dyrektywy WE. vydva nasledujce prehlsenie o zhode poda smernice E a noriem pre vrobok. pp p p p. , deklareerib vastavuse jrgnevatele EL direktiivi dele ja normidele deklaruoja atitikti pagal ES direktyvas ir normas straipsniui izjavljuje sledei konformitet u skladu s odred bom EZ i normama za artikl Atbilstbas sertifikts apliecina zemk minto preu atbilstbu ES direktvm un standartiem Samrmisyfirlsing stafestir eftirfarandi samrmi samkvmt reglum Evfrpubandalagsins og stlum fyrir vrur

Technische nderungen vorbehalten Technical changes subject to change Sous rserve de modifications Con riserva di apportare modifiche tecniche
Der tages forbehold fr tekniske ndringer Technikai vltozsok jogt fenntartva
Bf Zadravamo pravo na tehnine izmjene. 4 j W Zadravamo pravo na tehnike promen Technick zmny vyhrazeny Technick zmny vyhraden

Seite 49

k Nur fr EU-Lnder Werfen Sie Elektrowerkzeuge nicht in den Hausmll! Gem europischer Richtlinie 2002/96/EG ber Elektro- und Elektronik-Altgerte und Umsetzung in nationales Recht mssen verbrauchte Elektrowerkzeuge getrennt gesammelt werden und einer umweltgerechten Wiederverwertung zugefhrt werden. Recycling-Alternative zur Rcksendeaufforderung: Der Eigentmer des Elektrogertes ist alternativ anstelle Rcksendung zur Mitwirkung bei der sachgerechten Verwertung im Falle der Eigentumsaufgabe verpflichtet. Das Altgert kann hierfr auch einer Rcknahmestelle berlassen werden, die eine Beseitigung im Sinne der nationalen Kreislaufwirtschaftsund Abfallgesetze durchfhrt. Nicht betroffen sind den Altgerten beigefgte Zubehrteile und Hilfsmittel ohne Elektrobestandteile. t For EU countries only Never place any electric tools in your household refuse. To comply with European Directive 2002/96/EC concerning old electric and electronic equipment and its implementation in national laws, old electric tools have to be separated from other waste and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot. Recycling alternative to the demand to return electrical devices: As an alternative to returning the electrical device, the owner is obliged to cooperate in ensuring that the device is properly recycled if ownership is relinquished. This can also be done by handing over the used device to a returns center, which will dispose of it in accordance with national commercial and industrial waste management legislation. This does not apply to the accessories and auxiliary equipment without any electrical components which are included with the used device. p Uniquement pour les pays de l'Union Europenne Ne jetez pas les outils lectriques dans les ordures mnagres. Selon la norme europenne 2002/96/CE relative aux appareils lectriques et systmes lectroniques uss et selon son application dans le droit national, les outils lectriques uss doivent tre rcolts part et apports un recyclage respectueux de l'environnement. Possibilit de recyclage en alternative la demande de renvoi : Le propritaire de lappareil lectrique est oblig, en guise dalternative un envoi en retour, contribuer un recyclage effectu dans les rgles de lart en cas de cessation de la proprit. Lancien appareil peut tre remis un point de collecte dans ce but. Cet organisme devra lliminer dans le sens de la Loi sur le cycle des matires et les dchets. Ne sont pas concerns les accessoires et ressources fournies sans composants lectroniques.

Seite 54

t GUARANTEE CERTIFICATE
Dear Customer, All of our products undergo strict quality checks to ensure that they reach you in perfect condition. In the unlikely event that your device develops a fault, please contact our service department at the address shown on this guarantee card. Of course, if you would prefer to call us then we are also happy to offer our assistance under the service number printed below. Please note the following terms under which guarantee claims can be made: 1. These guarantee terms cover additional guarantee rights and do not affect your statutory warranty rights. We do not charge you for this guarantee. 2. Our guarantee only covers problems caused by material or manufacturing defects, and it is restricted to the rectification of these defects or replacement of the device. Please note that our devices have not been designed for use in commercial, trade or industrial applications. Consequently, the guarantee is invalidated if the equipment is used in commercial, trade or industrial applications or for other equivalent activities. The following are also excluded from our guarantee: compensation for transport damage, damage caused by failure to comply with the installation/assembly instructions or damage caused by unprofessional installation, failure to comply with the operating instructions (e.g. connection to the wrong mains voltage or current type), misuse or inappropriate use (such as overloading of the device or use of non-approved tools or accessories), failure to comply with the maintenance and safety regulations, ingress of foreign bodies into the device (e.g. sand, stones or dust), effects of force or external influences (e.g. damage caused by the device being dropped) and normal wear resulting from proper operation of the device. The guarantee is rendered null and void if any attempt is made to tamper with the device. 3. The guarantee is valid for a period of 2 years starting from the purchase date of the device. Guarantee claims should be submitted before the end of the guarantee period within two weeks of the defect being noticed. No guarantee claims will be accepted after the end of the guarantee period. The original guarantee period remains applicable to the device even if repairs are carried out or parts are replaced. In such cases, the work performed or parts fitted will not result in an extension of the guarantee period, and no new guarantee will become active for the work performed or parts fitted. This also applies when an on-site service is used. 4. In order to assert your guarantee claim, please send your defective device postage-free to the address shown below. Please enclose either the original or a copy of your sales receipt or another dated proof of purchase. Please keep your sales receipt in a safe place, as it is your proof of purchase. It would help us if you could describe the nature of the problem in as much detail as possible. If the defect is covered by our guarantee then your device will either be repaired immediately and returned to you, or we will send you a new device. Of course, we are also happy offer a chargeable repair service for any defects which are not covered by the scope of this guarantee or for units which are no longer covered. To take advantage of this service, please send the device to our service address.

Einhell Blue 2009

Einhell UK is pleased to celebrate its 45th anniversary with the release of its new range - Einhell Blue. This new range incorporates power tools and garden equipment under one main brand and benefits from having complete new tooling; premium quality soft touch finish as standard; brand new packaging designs and marketing material including new Tool Bars; a new and improved customer service system and a fully updated and expansive spares department service. Once again all products will carry the 2 year guarantee, trusted after sales service and assistance with spare parts if and when required. The Einhell Blue range boasts a solid collection of products which include the latest power tool innovation including the BT-MG 180 Multifunctional Tool to the BT-RH 1500 Rotary Hammer Drill - and in the garden range Einhell continues to lead the way with petrol powered garden equipment including the new Einhell Blue BG-PC 3735 Petrol Chainsaw Kit with the environmentally friendly Low Co2 Emission Certification. This 2009 edition of the catalogue also introduces the new Einhell Red range which is coming soon - this range is the highest spec range ever to be developed by Einhell and features total innovation and design. This range will be available in the UK soon.
Power Tools Cordless Drills.. 5-6 Corded Drills... 6-7 Multifunction Tools... 7 Table Saw... 7 Jigsaws.. 9 Sanders.. 9 - 11 Biscuit Jointer... 11 Planers... 11 Circular Saw.. 12 Reciprocating Saw... 12 Router.. 12 Angle Grinders/ Bench Grinder.. 13 Compressors/ Air Tools.. 13 - 15 Sliding Mitre Saw.. 15 Tile Cutter... 15 Log Splitter... 15 - 16 Industrial Vacuums... 16 Hand Truck... 16 Garden - Electric Dirty Water Pump... Electric Hedge Trimmer.. Electric Lawntrimmer.. Electric Blower Vac.. Electric Lawnmower.. Electric Garden Shredder..
Garden - Petrol Petrol Brushcutter Kit... Petrol Trimmer.. Petrol Chainsaw Kit.. Petrol Lawnmower... Petrol Hedge Trimmer.. Garden Cart..
Cordless Drills... 22 Corded Drills... 22 - 23 Angle Grinder.. 23 - 25 Jigsaw.. 25 Circular Saw.. 25 Planer... 25 Router.. 26 Sander... 26 Table Saw... 27 Tile Cutter.. 27 Sliding Mitre Saw.. 27
4.8v Cordless Screwdriver
Art No: 45.107.02 | BT-SD 4.8F

18v Cordless Drill

Art No: 45.133.30 | BT-CD 18
Features Pivot Joint Soft Grip LED Light Reverse Facility Charger Socket Wrench Holder Magnetic Bit Holder 28 Drill Bits Carry Case
Technical Power: 4.8v Speed: 200rpm Charge Time: 3-5 hour
Features Reverse Facility 6 Drill Bits Soft Grip Keyless Chuck Quick Stop Electronic Speed Control Carry Case Bit Holder
Technical Torque Settings: 22 Speed: 550rpm Charge Time: 3-5 hour Spare Parts 40 Piece Drill Bit Set: 42.580.80
18v Cordless Hammer Drill
Art No: 45.131.72 | BT-CD 18i
Cordless Combi and Drill Driver Twin Pack (Promotional Line)
Art No: 45.137.20 | BT-CD 18 TP

See page 6 for details

Features Electronic Speed Control Soft Grip Keyless Chuck Reverse Facility Carry Case Spare Parts 40 Piece Drill Bit Set: 42.580.80
Technical BT-CD 18 Speed: 0 - 550rpm Charge Time: 1 hour Torque: 17 Settings Weight: 5.9kg BT-CD18i Speed: 1st Gear 0-350rpm 2nd Gear 0-900rpm Charge Time: 1 hour Torque: 17 Settings

www.einhell-uk.co.uk

24v Cordless Impact Drill
Art No: 45.132.23 | BT-CD 24i
1500w Rotary Hammer Drill
Art No: 42.584.45 | BT-RH 1500

Multifunction Tool Kit

Art No: 44.191.75 | BT-MG 135
Features Includes 2 Batteries Carry Case 12 Drill Bits Keyless Chuck Soft Grip Electronic Speed Control Hammer Function
Technical Speed: 400rpm (1st Gear) 1150rpm (2nd Gear) Torque Settings: 16 Charge Time: 1 Hour Spare Parts 40 Piece Drill Bit Set: 42.580.80
Features 2 Batteries Soft Grip Reverse Facility Keyless Chuck Electronic Speed Control Battery Charge Indicator LED Lamp Impact Drill Function 6 Bit Inserts Carry Case Magnetic Bit Holder
Technical Power: 24v Speed: 1st Gear 0-350rpm 2nd Gear 0-1100rpm Torque Settings: 22 Charge Time: 1 hour Weight: 6.0kg Spare Parts 40 Piece Drill Bit Set: 42.580.80
Features Soft Grip 3 Mode SDS Hammer Hammer Stop Rotation Stop Vibration Absorbing Handle 3 SDS Drill Bits Pointed Chisel Flat Chisel Dust Cap Carry Case
Technical Power: 1500w Speed: 800rpm BPM: 3900BPM/4 Joules Drilling Depth: 32mm (Concrete) Spare Parts SDS Drill Bit + Chisel Set, 12 Pce in Aluminium 42.580.90
Features Soft Grip 217 Piece Accessory Kit Carry Case Height Adjustable Tripod Flexible Shaft Speed Control Locking Knob
Technical Power: 135w Speed: 10000-35000rpm

650w Impact Drill

Art No: 42.586.58 | BT-ID 650E

1010w Impact Drill

Art No: 42.598.00 | BT-ID 1000E

Multifunction Tool

Features Soft Grip Innovative Dust Extraction Kit for Clean and Simple Operation Scraper for Multiple Surfaces including Concrete and Wood Plunge Cut Saw Blade for Making Clean Cuts into Multiple Material including Wood Sanding Discs Allen Key for Different Head Attachments Attachments can be locked into different positions (from 0-45 in either direction) for effortless operation Bi-Metal Blades Available for Cutting through Metal Piping and Numerous Metal Materials

Art No: 44.650.00 | BT-MG 180

800w Table Saw

Art No: 43.407.60 | BT-TS 800
Features Electronic Speed Control Soft Grip Keyless Chuck Reverse Facility Additional Handle with Depth Gauge
Technical Power: 650w Speed: 2600rpm Drilling Depth: 13mm (Concrete) 10mm (metal) 25mm (wood) Weight: 2kg
Features Soft Grip Reverse Facility Key Chuck Metal Depth Stop Additional Handle Spare Parts 40 Piece Drill Bit Set: 42.580.80
Technical Power: 1010w Speed: 3000rpm BPM: 48000BPM Drilling Depth: 13mm (Concrete) 10mm (Metal) 25mm (Wood) Weight: 2.3kg
Technical Power: 180w Speed: 21000rpm Function: Grinds, cuts and sands through various material Spare Parts 6pce Bi-Metal Blade Set: 44.650.10 5pce Accessory Blade Set: 44.650.11
Features Adjustable Saw Blade from 0-45 to the left Adjustable Parallel Stop with Two Stop Heights Connection for Dust Extractor 36mm Sliding Stick
Technical Power: 800w Speed: 2950rpm Bench Size: 500 x 335mm Max. Cutting Height: 45mm (90) 27mm (45) Weight: 11kg
Spare Parts TCT Blade: 200 x 16mm - 48Teeth: 45.020.32 TCT Blade: 200 x 16mm - 20 Teeth: 45.020.46

400w Jigsaw

Art No: 43.211.00 | BT-JS 400E

800w Pendulum Jigsaw

Art No: 43.211.20 | BT-JS 800E
Features Electronic Speed Control Adjustable Sole Plate (45) Dust Extraction Adaptor Allen Key Soft Grip Spare Parts Saw Blade Set, T-Shaft, 10pce: 43.101.70
Technical Power: 400w Speed: 500-3000rpm Cutting Depth: 55mm (Wood) 10mm (Plastic) 6mm (Metal) Weight: 2kg
Features Electronic Speed Control Adjustable aluminium soleplate (45) Dust Extraction Soft Grip 4 Stroke Pendulum Adjustments LED Light Keyless Blade Change Parallel Guide
Technical Power: 800w Speed: 500-3000rpm Cutting Depth: 80mm (Wood) 25mm (Plastic) 10mm (Metal) Bevel Cuts, Max. (45) Weight: 2.5kg Spare Parts Saw Blade Set, T-Shaft, 10pce: 43.101.70

Delta Sander

Art No: 44.642.22 | BT-DS 180

850w Belt Sander

Art No: 44.662.12 | BT-BS 850E
Features Velcro Fastening for Quick Change Connection for Dust Extractor and Adaptor Soft Grip Incl. Sanding Sheet
Technical Power: 180w Speed: 8000rpm Size of Sanding Area: 90 x 90 x 90mm Weight: 1.3kg
Features Integrated Dust Extraction System Electronic Speed Control Additional handle for improved accuracy Soft Grip Dust Bag Sanding Belt Quick Belt Change
Technical Sanding Speed: 280m/min Sanding Area: 76 x 130mm Belt Size: 76 x 457mm Weight: 4.1kg Spare Parts Assorted Belts 43 x 457mm x 8 Blades: 44.662.12

420w Rotating Sander

Art No: 44.621.60 | BT-RS 420 E

150w Orbital Sander

Art No: 44.605.44 | BT-OS 150
Features Velcro Fastening for Quick Disc Change Adjustable additional handle Electronic Speed Control Dust Bag Includes Sanding Discs
Technical Power: 420w Speed: 6000-12000rpm Sanding Area: 125mm Weight: 2.5kg Spare Parts Assorted Sanding Discs x 10: 44.602.67
Features Dust Extraction Adaptor Soft Grip Additional Handle for increased accuracy Includes Sanding Sheets
Technical Power: 150w Speed: 11500rpm Sanding Area: 187 x 90mm Abrasive Paper Size: 240 x 90mm Weight: 1.6kg
Spare Parts Sanding Sheets - 40 Grit x 10: 44.602.00 Sanding Sheets - 60 Grit x 10: 44.602.01 Sanding Sheets - 100 Grit x 10: 44.602.02

860w Biscuit Jointer

Art No: 43.506.11 | BT-BJ 900

750w Planer

Art No: 43.452.61 | BT-PL 750

See page 11 for details

Features Soft Grip 3 Step Quick Adjustment of Cutting Depth Large Base Plate Locking Knob for Changing Cutters Dust Bag Face Spanner for changing Cutters Carry Case Height Adjustable up to 6cm
Technical Power: 860w Speed: 11000rpm Cutting Depth: 14mm 100 x 22 x 3.8/14mm Angle Settings: Innite Adjustable up to 180 Weight: 4.6kg Spare Parts Spare Blade - 43.506.90
Features Planing Material Can Be Ejected Left or Right through a Switch Soft Grip Adjustable Planing Depth TCT Planing Blade Aluminium Planing Plate Rebate Depth Stop Parallel Guide Dust Bag
Technical Power: 750w Speed: 16500rpm Chipping Depth: 0-2mm Rebating Depth: 0-6mm Planing Width: 82mm Weight: 3.2kg Spare Parts Dust Bag: 434526001077

www.einhell-uk.co.uk 11

1200w Circular Saw
Art No: 43.309.30 | BT-CS 1200
1400w Soft Start Circular Saw
Art No: 43.309.40 | BT-CS 1400
850w Angle Grinder (115mm)
Art No: 44.305.92 | BT-AG 850
2000w Soft Start Angle Grinder (230mm)
Art No: 44.306.20 | BT-AG 2000
Features Keyless Cutting Depth Adjustment Soft Grip Riving Knife Parallel Guide Dust Extraction Adaptor TCT Saw Blade
Technical Power: 1200w Speed: 4800rpm Cutting Depth: 55mm (90) 37mm (45) Weight: 4.2kg Spare Parts Spare Blade 160 x 20mm Bore 18 Teeth: 45.020.30
Features Keyless Depth Adjustment Soft Grip TCT Saw Blade Soft Start Parallel Guide Riving Knife Dust Extraction Adaptor

Technical Power: 1400w Speed: 4800rpm Cutting Depth: 66mm (90) 45mm (45) Weight: 4.85kg Spare Parts Spare Blade 190 x 20mm Bore 24 Teeth: 45.020.86
Features Spindle Lock Soft Grip Metal Gear Head Disc Guard Additional Handle Pin Spanner
Technical Power: 850w Speed: 11000rpm Disc Size: 115mm Weight: 2.1kg Spare Parts 3 x Diamond Disc Set: 44.403.37
Features Soft Start Spindle Lock Metal Gear Housing Disc Protection Additional Handle Pin Spanner
Technical Power: 2000w Speed: 6000rpm Disc Size: 230mm Weight: 6kg Spare Parts 2 x Diamond Disc Set : 44.403.33

650w Reciprocating Saw

Art No: 43.261.22 | BT-AP 600E

1200w Router

Art No: 43.504.80 | BT-RO 1200E

150w Bench Grinder

Art No: 44.125.50 | BT-BG 150

2000w Hot Air Gun

Art No: 45.201.67 | BT-HA 2000
Features Keyless Blade Change Keyless Soleplate Adjustment Electronic Speed Control Soft Grip Saw blade for Wood Saw Blade for Metal
Technical Power: 650w Speed: 500 - 3000rpm Cutting Depth: 115mm (Wood) 10mm (Metal) Stroke Height: 20mm Weight: 3.2kg
Features Innitely Adjustable Cutting Depth Electronic Speed Control Spindle Lock 3 Step Quick Adjustment of Cutting Depth Soft Grip Compass Point Parallel Guide Dust Extractor Adaptor Tool for Changing Cutters
Technical Power: 1200w Speed: 11000 - 30000rpm Stroke Height: 55mm Collett Size: 8 & 6mm Weight: 3.5kg
Features Adjustable Safety Shields Adjustable Work Supports Incl. 1 Coarse Grinding/ Sanding Wheel Incl. 1 Fine Grinding/ Sanding Wheel Rubber Feet for Secure Positioning
Technical Power: 150w Speed: 2950rpm Grinding/Sanding Wheel: 150 x 12.7 x 16mm Weight: 7kg Spare Parts Fine Grinding/Sanding Wheel: 44.125.14 Coarse Grinding/Sanding Wheel: 44.125.15
Features 2 Heat Settings Soft Grip Carry Case Heat Nozzle Wide Nozzle Reducer Nozzle 22mm Reector Nozzle Paint Scraper
Technical Power: 1000/2000w Heat Settings: 350C / 550C Air Settings: (Setting 1) - 300l/min (Setting 2) - 500l/min

www.einhell-uk.co.uk 13

24L Oil Free Air Compressor
Art No: 40.205.05 | BT-AC 200/24 OF

50L Air Compressor

Art No: 40.101.60 | RT-AC 270/50/10

Ratchet Wrench Set

Art No: 41.391.70 | DRS200/2

1700w Sliding Mitre Saw

Art No: 43.007.20 BT-SM 2050
Features Oil Free Compressor Suitable for most Compressed Air Applications Transport Handle Drain Cock Intake Filter
Technical 24L Capacity Speed: 176L/min Bar: 8 bar Weight: 15.7kg
Features Suitable for most compressed Air Applications
Technical 50L Capacity Speed: 233L/min Bar:10 bar
Essential Tools and Accessories Air Tool Set:41.327.20 Angle Grinder: 41.388.00 Ratchet Wrench Set: 41.391.70
Essential Tools and Accessories Air Tool Set: 41.327.20 Angle Grinder: 41.388.00 Ratchet Wrench Set: 41.391.70
Features Powerful pneumatic ratchet screwdriver with practical carry case inclusive of 9 parts chisel set. The non-slip, rubberised handle allows for safe and comfortable use
Technical Air Consumption: 113 CFM: 4 Operating Pressure: 6 Bar Air Pressure: 87psi
Features Carbide Metal Saw Blade Locking Positions: 0/15/22.5/30/45 Incl. Dust Bag and Support Bar on both sides Multiple locking angles for precise Cuts Clamping Device for Holding Work piece rmly in position
Technical Power: 1700w Speed: 4800rpm Max. Cutting Width: 205mm Carbide Metal Saw Blade: 210mm x 30mm/24t Max. Saw Width: 90 - 205 x 65mm 45 - 140 x 65mm Weight: 14.6kg
Spare Parts TCT Saw Blade 24Teeth 45.020.48 TCT Saw Blade 48Teeth 45.020.34

5 Piece Air Tool Set

Art No: 41.327.20 | 5 Piece Air Tool Set

Angle Grinder

Art No: 41.388.00 | DWS200

600w Tile Cutter

Art No: 43.011.63 | BT-TC 600

1500w Log Splitter

Art No: 34.320.13 | BT-LS 44
Features Paint Spray Gun Oil Spray Gun Tyre Inator with Pressure Gauge Air Blower Spiral Air Hose with Quick Coupling
Technical All suitable with the Einhell Compressor
Features Powerful 125ml angle grinder. Complete safety guard handle, spanner set and male male snap coupling
Technical Air Consumption: 170 CFM: 6 Operating Pressure: 6 Bar Air Pressure: 87psi No Load: 11000rpm
Features Diamond Cutting Wheel Water Cooled System Parallel Guide Workbench can be angled at 45

Technical Power: 230v - 600w Speed: 3000rpm Cutting Depth: 35mm (90) 12mm (45) Cutting Wheel: 180 x 25.4mm Bench Size: 330 x 360mm Weight: 10.8kg
Spare Parts Diamond Disc 180 x 25.4mm Bore: 43.011.70
Features Two hand Control Transport Handle Overload Release Strong and Sturdy Wheels Stable Foot Rest
Technical Power: 1500w Splitting Pressure: 4t Splitting Stroke: 310mm Trunk Holding Capacity: 50 - 250mm Noise level LPA: 65dB(A) Oil Tank Capacity: 2.4L Max. wood dimension: Diameter: 50 - 250 mm Length max.: 370 mm Weight: 42kg

www.einhell-uk.co.uk 15

2200w Log Splitter
Art No: 34.320.41 BT-LS 610
Features Adjustable Log Holding Plates Height Adjustable Corrugated Steel Work Bench Two Handed Safety Switch Emergency Stop Function Zero Voltage Stop Double Clamp for Material Sturdy Foot Adjustable Splitting Wedge Height Transport Handle Technical Power: 2200w Splitting Pressure: 6t Splitting Stroke: 480mm Trunk Holding Capacity: 100 - 320mm

1250w Wet n Dry Vacuum

Art No: 23.421.60 BT-VC 1250S

350w Dirty Water Pump

Art No: 41.705.69 | BG-DP 3530

750w Dirty Water Pump

Art No: 41.705.93 | BG-DP 7535
Features Complete Accessory Kit Onboard Accessory Storage Blow Connector Handle with Air Regulator Stainless Steel Tank Technical Power: 1250w Container Volume: 20L Weight: 6.8kg Spare Parts Wet and Dry Vacuum Bag x 5: 23.511.52 Features Carry Handle Universal Connector for 1 and 1 Hose with 1 Male Thread 90 Angle 1 x 1 External Thread Float Switch Technical Power: 350w Max. Pumping Rate: 7000 Litres/Hour Max. Submersion Depth: 5m Max. Particle Size: 30mm Extraction Height: 40mm Weight: 4.2kg Features Carry Handle Float Switch Universal Connector for 1 and 1 hoses as well as 1 male thread 90 Angle 1 x 1 External Thread Technical Power: 750w Max. Pumping Rate: 15000 Litre/Hour Max. Submersion Depth: 8m Max. Particle Size: 35mm Weight: 5.2kg
Noise level LPA: 78dB(A) Max. wood dimension: Diameter: 100 - 1040 mm Length max.: 150 - 1040 mm Weight: 99kg
1400w Wet n Dry Vacuum (Promotional Line)
Art No: 23.423.10 BT-VC 1450 SA

Hand Truck

Art No: 22.601.12 BT-HT 90
550w Electric Hedge Trimmer
Art No: 34.035.06 | BG-EH 551
500w Electric Lawn Trimmer

Art No: 34.018.10 | BG-PT 3041
Features Adjustable Carrying Belt Two Part Suction Tube 2 Guide Rollers 3 Function: Shred, Suction and Blow 45L Collection Capacity Suction/ Blow Selector Switch
Technical Power: 2100w Air Speed: 250 km/h Suction Capacity: 12 m/min. No Load Speed: 14000rpm Shredding Ratio: 10:1 Weight: 4kg
Features High impact resistant plastics Specially designed grass protecting wheels Foldable Handle Adjustment 36L Grass Collection Box 3 Adjustable Cutting Height Settings (25/42.5/60mm) Technical Power: 1300w Cutting Width: 36cm Cutting Height Settings: 25/42.5/60mm Weight: 9.5kg
Technical Power: 30cc/1.1hp Motor: 2 Stroke Cutting Width with Twin Line: 41cm Cutting Width with Blade: 23cm Weight: 7.8kg Spare Parts Spare Blades: 34.050.81 Spare Spools: 34.050.86
Spare Parts Spare Blade: 34.056.05
Spare Parts Spare Spool Set: 34.050.91

900w Electric Lawnmower

Art No: 34.002.40 | BG-EM 930

2000w Garden Shredder

Art No: 34.303.62 | BG-KS 2040

37cc Petrol Chainsaw Kit

Art No: 45.013.69 | BG-PC 3735 Kit
Features High impact resistant plastics Specially designed grass protecting wheels Foldable handle adjustment 3 level adjustable height settings 28L Grass Collection Box Technical Power 900w Cutting Width: 30cm 3 Cutting Heights: 25/42.5/60mm Weight 7.8kg
Features Motor Safety Switch Double Sided Blades Made of Grounded Steel Tilting Tube with Protective Locking Funnel Tube with Rubber Lamella Preventing Material Being Lost Robust Wheels for Easy Transportation Incl. Garden Waste Bag Incl. Stopper Technical Power: 2000w Max. Branch Size: 40mm Idle Speed: 4500rpm Weight: 12.1kg
Spare Parts Spare Blade: 34.056.00
Spare Parts Spare Blades: 34.059.20
Features Auto Choke, Primer and Electronic Ignition Chain Brake/Finger Guard - Stops the chain within miliseconds in case of Kick-Back Chain Catch - Preventing Chain From Jumping out of Cutter Rail Anti Vibration Cushions Shocks Additional Protective
Helmet and Ear Guards Protective Bag and Casing for the Chainsaw Protective Gloves Automatic Lubrication of Cutter Rail and Chain Passes the pollutants directive 2002/88 EC (emission 2) Ensuring this product is environmentally friendly Additional 2nd Chain included.

Technical Power: 37cc/2hp Cutter Rail Length: 35cm Cutting Speed: 19 metre/sec Weight: 5.7kg Spare Parts Spare Chain: 45.001.70

www.einhell-uk.co.uk 19

40cm Petrol Lawnmower
Art No: 34.010.16 | BG-PM 40 P
46cm Self Propelled Petrol Lawnmower
Art No: 34.007.10 | BG-PM 46 S
Features Ergonomic Foldable Handle 1 Cylinder/ 4 Stroke Engine Hard Wearing 45L Grass Collection Bag 3 Cutting Height Adjustments (32/46/62mm) Spare Parts Spare Blade: 34.055.24
Technical Power: 3.6kw/3.5hp Cutting Width: 40cm 3 Cutting Heights: 32/46/62mm Weight: 24.4kg
Features Ergonomic Foldable Handle Self Propelled Engine Hardwearing 60L Textile Grass Collection Bag Rear Wheel Drive 4 Stroke Engine Central 5-setting Cutting Height Adjustment (32 - 70mm) Powder Coated Sheet Steel Housing Spare Parts Spare Blade: 34.055.25
Technical Power: 2.75kw/ 3.75hp Cutting Width: 46cm Cutting Heights: 32 - 70m Weight: 34.5kg
2300w Soft Start Angle Grinder

44.305.70 | RT-AG 230

22cc Petrol Hedge Trimmer
Art No: 34.038.40 | BG-PH 2250

80L Garden Cart

Art No: 34.153.10 | BG-GC 80

See page 24 for details

Features Low Vibration 2-Stroke Engine Ignition Lock and Throttle Lock Electronic Ignition Counter Rotating Double Bladed Safety Cutters made from Precision Ground Steel Manual Fuel Pump Soft Grip
Technical Power: 22cc Cutting Length: 50cm Cuts Per Minute: 2900rpm Max. Cutting Thickness: 20mm Weight: 7kg
Featu Features Plug Together P System for Easy Assembly Height Adjustable Filler Opening 80L Waste Bag Capacity Spare Parts: Spare Bags: 34.153.15
Technical Filler Opening: 39 x 32cm Height Adjustment: 55 - 82cm Weight: 3.8kg

www.einhell-uk.co.uk 21

3.6v Lithium Screwdriver
Art No: 45.132.80 | RT-SD 3.6 Li
18v Cordless Impact Drill
Art No: 45.132.60 | RT-CD 18i
Features Battery Capacity Indicator Metal gear box LED light for accuracy and precision Magnetic tray for screws Soft grip 4 bits Holster bag
Technical Power: 3.6v Power pack: Li-Ion Capacity: 1.3Ah Charging time: 3-5h No-load speed: 200rpm Torque, specied: 3,5Nm Weight: 0.35kg
Features Two Batteries LCD Display LED light for accuracy and precision Quick stop Auto spindle lock function 10mm single sleeve chuck (keyless) Softgrip Magnetic tray for screws Shock absorber cap 10 bits Carry Case

750w Impact Drill

Technical Power: 18v Charge Time 1 hour 2 Gears No Load Speed: 1250rpm Weight: 6.3kg
Art No: 42.597.40 | RT-ID 75

See page 22 for details

1050w Impact Drill

1250w Rotary Hammer

Art No: 42.584.40 | RT-RH 32

600w Angle Grinder

Art No: 42.597.70 | RT-ID 105
Art No: 44.305.50 | RT-AG 115
Features Patented dust exhaust system Keyless chuck (13mm) Soft grip Front handle with Integrated Bit Storage Cable clip Complete with 3 Drill Bits
Technical Power 750w No-Load speed: 2700rpm 0-43200bpm Gears: 1 Drilling capacity: - Wood: 30mm - Steel: 13mm - Concrete: 16mm - Weight: 2.8kg
Features Front handle with Integrated Bit Storage Keyless Chuck (13mm) Metal gear head Soft grip Cable clip 6 drills
Technical Power: 1050w No Load Speed: (1st Gear) - 1100rpm (2nd Gear) - 3000rpm Cutting Depth: - Wood: 40mm - Concrete: 16mm - Steel: 13mm - Weight: 3.9kg
Features Vibration Absorbing Handle Full magnesium head Cable clip Soft Grip 4 SDS plus drills 2 SDS plus chisels Carry Case
Technical Power: 1250w No-load speed: 800rpm Blow rate: 4300bpm Impact power 3.5 Joule Drilling capacity: - concrete: 32 mm Chuck: SDS-plus Hammer stop facility Rotation stop facility Weight: 10.5kg Cable: 3.0m
Features Keyless Disc Guard Adjustment Wrench storage in front handle Front handle mountable in 3 positions Soft Grip Spindle lock Cable clip
Technical Input power: 600w Disc diameter: 115mm No-load speed: 11000rpm Metal Gear Head Weight (w/o disc): 1.85kg Cable 3.0m

www.einhell-uk.co.uk 23

750w Pendulum Jigsaw
Art No: 43.210.80 | RT-JS 85
Features Metal Gear Head Soft start Keyless Guard Adjustment Front handle mountable in 3 positions Spindle lock Cable clip Soft grip
Technical Input power: 2300w Disc diameter: 230mm No-load speed: 6500rpm Weight (w/o disc): 5.9kg Cable: 3.0m
Features Keyless Blade Change Die Cast Base Plate LED light for accuracy and precision Blade Storage on Machine Cable clip Soft grip 45 bevel cut Parallel guide
Technical Power: 750w Strokes: 800 - 3000rpm Cutting depth wood: 85mm Cutting depth steel: 8mm Bevel cut max: Position Pendulum Action Weight: 2.5kg Cable: 3.0m

300W Oscillating Sander

44.605.50 | RT-OS 30
Art No: 43.309.10 | RT-CS 165

850w Electric Planer

Art No: 43.452.70 | RT-PL 82

See page 26 for details

Features Die Cast Base Plate Additional Handle Cable clip Keyless Cutting Depth Adjustment Softgrip Parallel guides
Technical Power: 1200w No Load Speed: 5200rpm Cutting Depth: 54mm Saw Blade: 165mm x 16mm x 24 Teeth Weight: 5.0kg
Features Variable dust extraction (left and right) Automatic blade protection Storage box in unit for Blade and Key Cable clip Softgrip Parallel guide Dust bag
Technical Power: 850w Planing width: 82mm Chipping depth: 3mm Rebate depth: 18mm Speed: 15000rpm Weight: 4.0kg

www.einhell-uk.co.uk 25

Art No: 43.504.90 | RT-RO 55

44.662.30 | RT-BS 75

900w Table Saw
Art No: 43.407.32 | RT-TS 920

1700w Table Saw

Art No: 43.406.47 RT-TS 1725 U
Technical Power: 1700w No Load Speed: 4800rpm Cutting Height: 90 - 73mm 45 - 53mm Saw Blade Rotation Range: 0- 45 Table Size: 626 x 445mm Height of Under-frame: 330mm Working Height with Under-frame: 900mm Weight: 33.5kg Features Laser for Precise Cuts and Guide Saw Blade Angle Adjustment with Scale Saw Blade Height Adjustment Additional Handles for Transport
Features Safety Guard Collet Size 6 and 8mm Soft grip Cable clip Parallel guide Guide Bush
Technical Power: 1200w Plunge depth: 55mm No-load speed: 11000 - 30000rpm Collet size/tool holder: 6/8mm Weight: 4kg Cable: 3m
Features Adjustable handle Variable Belt Speed Cable clip Soft grip Dust bag Adaptor for dust extraction
Technical Power: 850w Sanding belt size: 533 x 75mm Sanding surface: 140 x 75mm No-load speed: 300 400rpm Weight 3.25kg Cable 3.0m
Features TCT Blade (20 Teeth) Pivotable Saw Blade at 0 - 45 angle Saw Blade Height Adjustment 0-45mm Adjustable Parallel Stop with 2 Stopping Heights Cross Fence with Angle Scale Saw Blade Protection with Dust Extraction Adaptor Cable Holder
Technical Power: 900w No Load Speed: 4500rpm No of Teeth on Blade: 20 Table Size: 513 x 400mm Blade Size: 205 x 16 x 2.5mm Max Cutting Depth: 90 - 45mm / 45 - 41mm Weight: 13.5kg
Easy to build underframe Powder Coated Table Extension Anodised Table Surface for Anti Friction Saw Blade Protection with Dust Exhaust TCT Blade (24 Teeth)

300w Oscillating Sander

280w Multi Sander

800w Tile Cutter w/Laser

Art No: 43.012.80 | RT-TC 560 U
Art No: 44.191.30 | RT-XS 28
1800w Sliding Mitre Saw with Base Frame
Art No: 43.007.00 RT-SM 305 L
Features Cable clip Softgrip Variable Speed Adjustment Dust collector incl. 1 wood velcro paper
Technical Power: 300w Sanding surface: 227 x 115mm Abrasive paper size: 280 x 115mm Velcro attachment Speed: 7000 - 11000rpm Weight: 2.7kg
Features Velcro Sander and Clamping System Adjustable second handle Dust Collector Cable clip Soft grip Additional sanding paper
Technical Power: 280w No-load oscillations max.: 10000 rpm Orbital sander 4-corner: 140 x 115 mm Eccentric Sander: 125 mm Weight: 2.8kg Cable: 3.0m
Technical Power: 800w Speed: 2950rpm Cutting Depth: 90 - 30mm 45 - 25mm Cutting Length: 520mm Max. Wheel Dimensions: 200 x 25.4mm Weight: 28kg
Features Laser for precise cuts. Pivot Mounted Motor Guard Water collection tank with Coolant Pump. Stand for convenient operation.
Features Soft Start Highgrade Rotating Table made of Aluminium For Precise Cuts Ranging from -52 to +45 Motor Head Continuously Tiltable to the Left from 0 to + 45 Laser for Precise Cuts and Guidance Clamping Device Storage for Additional Blade Includes Dust Box and Castor with End Stop. Spindle Lock
Technical Power: 1800w No Load Speed: 4800rpm Carbide Tipped Saw Blade: 210 x 30 x 2.8mm No. of Teeth on Carbide Blade: 24 Max Cutting width 90 x 90: 310 x 65mm Weight: 27.6kg

www.einhell-uk.co.uk 27

Spares and After Sales
If you have any problems or queries about your Einhell product why not contact our experienced and knowledgeable Customer Service Team who will be more than willing to try and resolve your problem. Additionally if you are looking to purchase a spare part for your Einhell manufactured Petrol Gardenproduct orPower Toolyou can contact our Spare Parts Department here at Einhell. We have an experienced spares parts team who can assist in supplying the right part for your Einhell product.
Email: sales@einhell.co.uk technical@einhell.co.uk Tel: 1500
Opening Hours: Monday toThursday: 8.45am - 5.00pm Friday: 8.45 - 3.15pm Saturday & Sunday: Closed If you are unable to contact us in our opening hours we have an automated system on our website www.einhell-uk.co.uk where you can request information and we will resolve your query as soon as possible.

Einhell UK Unit 5 Morpeth Wharf Twelve Quays Birkenhead Wirral CH41 1LF Tel: 1500 Fax: 1501 www.einhell-uk.co.uk