12-inch, 300 Watt, Two-Way Compact Speaker System

KeyFeatures:

Ring-Mode Decoupling (RMDTM) for increased intelligibility Lightweight, durable polymer enclosure with intregal handles and stand mount EV DL12-BFH 12-inch woofer and DH2010A compression driver for great sound and reliable performance Constant-directivity 65 x 65 high-frequency horn Molded-in attatchment points for secure suspension Dual Neutrik Speakon high-current connectors Available in White (Sx300WE)

General Description:

The Electro-Voice Sx300 is a 300-watt, 12-inch two-way, high-efficiency, constant-directivity compact speaker system with Ring-Mode Decoupling (RMDTM). Through the extensive use of computer-aided design and modeling, Electro-Voice engineers have developed a state-of-the-art professional loudspeaker system. The high-frequency section of the Sx300 utilizes a molded-in, 65 x 65 constant-directivity horn. This unique pattern contributes to high intelligibility, vocals sound natural yet cut through in reverberant, noisy rooms. In addition, the coverage pattern is unusually uniform over its range of operation. Sound quality off axis is very well maintained, even at 45 off axis (a 90 total coverage angle), beyond the rated coverage angle. The horns unique, VaripathTM throat geometry helps direct driver output to the corners of the room, this helps cover areas of the audience that typically do not recieve good coverage. High-impact polypropylene structural foam provides a stiff and extremely durable lightweight enclosure. Molded into the cabinet are an integral carrying handle and a stand socket for mounting on 1-3/8-inch stands such as the ElectroVoice 100BK. Rubber feet that are attatched to the bottom of the cabinet and mating sockets that are molded into the top provide a means of stacking systems. The trapezoidal-shaped cabinet, in combination with the uniform, 65 x 65 directivity characteristics, make the Sx300 ideal for use alone or in arrays.
Technical Specifications:
Freq. Range1 (-3 dB): 60 Hz - 20 kHz Freq. Range1 (-10 dB): 50 Hz - 20 kHz Horizontal Coverage: 65 Nominal Ver tical Coverage: 65 Nominal Power Handling: 300 Watts Cont., 1200 Watts Peak Sensitivity (SPL 1W/1m): 99 dB Crossover Frequency: 1,500 Hz Nominal Impedance: 8 ohms (5 ohms minimum) LF Transducer : 12" DL12-BFH HF Transducer : 1" Exit DH2010A Connectors: (2) Neutrik Speakon NL4MP Enclosure Material: Polypropylene Structural Foam Grille: Powder Coated Steel Dim (H x W x D): 23.1" x 16.9" x 12.3" (586mm x 429mm x 312mm) Net Weight: 32 lbs (14.5 kg) Shipping Weight: 36 lbs (16.3 kg)

Half Space Measurement

Suspending the Sx300 with Mb100 and Mb200:
Frequency Response & Impedance:

Beamwidth:

Mb100 Mb200

Dimension Drawings:

Directivity:

PerformanceMatch:

Sb121 Bass Module 100BK Mounting Stand F200 Monitor Feet Attatchments Mb100 Forged Eyebolt Attatchment Kit Mb200 Wall/Ceiling Mounting Bracket Mb300 Horizontal Array Kit P1200 Amplifier Q44 Amplifier Q66 Amplifier Sx300E -- 11053031 Neutrik Speakon, Black Sx300WE -- 11053029 Neutrik Speakon, White

Sx300 Part Numbers:

12000 Portland Avenue South, Burnsville, MN 55337 Phone:952/884-4051, Fax:952/884-0043

www.electrovoice.com

Telex Communications, Inc. 4/2003 Part Number 534694 Rev D
U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at: + 49 9421-Fax: + 49 9421-Other International locations. For customer orders, contact Customer Service at: + 884-4051 Fax: + 736-4212 For warranty repair or service information, contact the Service Repair department at: 800/685-2606 For technical assistance, contact Technical Support at: 866/78AUDIO Specifications subject to change without notice.

Sx300 Ad 5/15

5/16/00 10:28 AM

Page 1

The EV Sx300 has the guts to outperform the competition.

Clean, powerful sound

RMD Technology (Ring-Mode Decoupling), the same concert technology found in EVs awardwinning X-Array Series, creates precise speaker intelligibility and clean, powerful performance across all volume levels. RMD removes mechanical and acoustic resonances in the enclosure and components so only pure audio remains.

Bright, crisp highs

VariPath Throat Geometry, another EV innovation, provides smooth, extended response and detailed, accurate highs from our exclusive constant-directivity HF horns.

Chest-pounding bass

Sx-Series Woofers have cast-frames and incredibly heavy-duty magnet structures.The result is unrivaled bass response that lets your audience feel the performance.

Protect your investment

The EV PRO Circuit protects the compression driver from damage if a dangerous condition occurs. Plus, the entire speaker is built within a durable, easy-to-carry case that stands up to the toughest road conditions.
Before you buy sound-reinforcement speakers, find out what's inside 'em
Only EV, the pioneer of professional speakers, packs such a huge level of technology into a portable and rugged 39-pound case.You can pay less for sound reinforcement speakers, but less is exactly what youll get. So go ahead and compare the others. we have a gut feeling youll make the clear choice.
The PSX1000 system combines two Sx300 speakers with a "matched component" PSX1000 powered mixer, ensuring top input-to-output performance from the individual components. EV, the world leader in sound reinforcement, offers matched systems for all speakers in the Sx Series.

Call today!

1-800-667-3968
Telex Communications, Inc.

www.electrovoice.com