Reviews & Opinions
Independent and trusted. Read before buy Electrolux ESF63020!

Electrolux ESF63020

Manual

Download (Russian)
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Electrolux ESF63020About Electrolux ESF63020
Here you can find all about Electrolux ESF63020 like manual and other informations. For example: review.

Electrolux ESF63020 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Electrolux ESF63020 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Electrolux ESF63020 photo ]

Video review

Electrolux ESF 63020 X mosogat g p M rkabolt

 

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

user manual

Dishwasher ESF 63020

We were thinking of you when we made this product

electrolux 3

Welcome to the world of Electrolux
Youve chosen a first class product from Electrolux, which hopefully will provide you with lots of pleasure in the future. Electrolux ambition is to offer a wide variety of quality products that would make your life even more comfortable. You can look at some examples on the cover in this manual. But now its time to study this manual and start using and enjoying the benefits from your new machine. We promise that itll make your life a little easier. Good luck!

156993830-00-11092007

The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. General information and tips Environmental information
4 electrolux Contents Safety information 5 Product description 6 Control panel 7 First use 9 Set the water softener 10 Filling with dishwasher salt 12 Use of rinse aid 13 Adjusting the dosage of rinse aid 14 Daily use 14 Loading cutlery and dishes 15 Use of detergent 18 Select and start a washing programme Unloading the dishwasher Washing programmes Care and cleaning Something not working Technical data Consumption values Hints for test institutes Installation Environment concerns 31 34
safety information electrolux 5

Safety information

Do not take any dishes out of the dishwasher before the end of the dishwashing cycle. After use, isolate the appliance from the power supply and turn off the water supply. This product should be serviced only by an authorised service engineer, and only genuine spare parts should be used. Under no circumstances should you attempt to repair the machine yourself. Repairs carried out by inexperienced persons will cause injury or serious malfunctioning. Contact your local Service Force Centre. Always insist on genuine spare parts.
In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety.

Correct use

This dishwasher is only intended for washing household utensils suitable for machine washing. Do not put any solvents in the dishwasher. This could cause an explosion. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Only use products (detergent, salt and rinse aid) suitable for dishwashers. Avoid opening the door whilst the appliance is in operation, hot steam may escape.

General safety

Dishwasher detergents can cause chemical burns to eyes, mouth and throat. Could endanger life! Comply with the safety instructions of the dishwasher detergent manufacturer. The water in your dishwasher is not for drinking. Detergent residues may still be present in your machine. Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves. Do not sit or stand on the open door.
6 electrolux product description

Child safety

This appliance is designed to be operated by adults. Dont allow children to use the dishwasher unsupervised. Keep all packaging well away from children. There is risk of suffocation. Keep all detergents in a safe place out of childrens reach. Keep children well away from the dishwasher when the door is open.

Installation

Check your dishwasher for any transport damage. Never connect a damaged machine. If your dishwasher is damaged contact your supplier. All packaging must be removed before use. Any electrical and plumbing work required to install this appliance must be
carried out by a qualified and competent person. For safety reasons it is dangerous to alter the specifications or attempt to modify this product in any way. Never use the dishwasher if the electrical supply cable and water hoses are damaged; or if the control panel, work top or plinth area are damaged such that the inside of the appliance is freely accessible. Contact your local Service Force centre, in order to avoid hazard. All sides of the dishwasher must never be drilled to prevent damage to hydraulic and electric components.

For electrical and water connection carefully follow the instructions given in specific paragraphs.
control panel electrolux 7

Product description

Upper basket Water hardness dial Salt container Detergent dispenser Rinse aid dispenser
Rating plate Filters Lower spray arm Upper spray arm Worktop
8 electrolux control panel

Control panel

7 Programme guide Programme knob Start/cancel button Delay start button Indicator lights On/Off indicator light Programme marker Indicator lights Wash Dry End of programme
Illuminates when the washing and rinsing phases are running. Illuminates when the drying phase is running. Illuminates when the washing programme has ended. It also has added functions of visual signalling as: the setting of the water softener, intervention of an alarm due to the malfunction of the machine. Illuminates when special salt needs to be filled.

Salt refilling

first use electrolux 9 Indicator lights Rinse aid
Illuminates when rinse aid needs to be filled.
1) The salt and rinse aid indicator lights are never illuminated while a washing programme is running even if filling with salt and rinse aid is necessary.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
wise, until the programme marker, placed on the knob, corresponds with the desired washing programme indicated on the control panel. The On/Off indicator light illuminates (position ON) To switch off the appliance turn the programme knob until the programme marker corresponds with the On/Off indicator light. The On/Off indicator light turns off (position OFF).
Programme knob and On/Off indicator light
The selection of a washing programme occurs by turning the programme knob clockwise or anticlock-
With the programme knob it is also possible to set the level of the water softener.

First use

Before using your dishwasher for the first time: Ensure that the electrical and water connections comply with the installation instructions Remove all packaging from inside the appliance Set the water softener Pour 1 litre of water inside the salt container and then fill with dishwasher salt Fill the rinse aid dispenser
10 electrolux set the water softener
If you want to use combi detergent tablets ("3 in 1", "4 in 1", "5 in 1" etc. ) follow the instructions given in "Use of detergent".

Set the water softener

The dishwasher is equipped with a water softener designed to remove minerals and salts from the water supply, which would have a detrimental or adverse effect on the operation of the appliance. The higher the content of these minerals and salts, the harder your water is. Water hardness is measured in equivalent scales, German degrees (dH), French degrees (TH) and mmol/l (millimol per litre - international unit for the hardness of water). Water hardness dH 51 - - - - - - - - - 10 TH 91 - - - - - - - - - 18 mmol/l 9,1 - 12,5 7,6 - 8,9 6,51 - 7,5 5,1 - 6,4 4,0 - 5,0 3,3 - 3,9 2,61 - 3,2 1,9 - 2,5 0,71 - 1,8 The softener should be adjusted according to the hardness of the water in your area. Your local Water Authority can advise you on the hardness of the water in your area.

4. Replace the cap making sure that there is no trace of salt on the screw thread or on the gasket. 5. Replace the cap tightly turning it clockwise until it stops with a click.
Do not worry if water overflows from the unit when filling with salt, this is quite normal.
use of rinse aid electrolux 13 replenished, assuming the dishwasher remains switched on. If you are using salts that take longer to dissolve then this can take longer. The function of the machine is not affected.
The salt indicator light on the control panel can remain illuminated for 2-6 hours after the salt has been

Use of rinse aid

Only use branded rinse aid for dishwashers. Never fill the rinse aid dispenser with any other substances (e.g. dishwasher cleaning agent, liquid detergent). This would damage the appliance.
Rinse aid ensures thorough rinsing, and spot and streak free drying. Rinse aid is automatically added during the last rinse. 1. Open the container by pressing the release button (A).
2. Add the rinse aid in the container. The maximum level for filling is indicated by "max".
14 electrolux adjusting the dosage of rinse aid The dispenser holds about 110 ml of rinse aid, which is sufficient for between 16 and 40 dishwashing cycles, depending upon the dosage setting. 3. Ensure that the lid is closed after every refill.
Clean up any rinse aid spilt during filling with an absorbent cloth to avoid excess foaming during the next wash.
Adjusting the dosage of rinse aid
According to the finish and drying results obtained, adjust the dose of rinse aid by means of the 6 position selector (position 1 minimum dosage, position 6 maximum dosage). The dose is factory set in position 4. Increase the dose if there are drops of water or lime spots on the dishes after washing. Reduce it if there are sticky whitish streaks on the dishes or a bluish film on glassware or knife blades.

Daily use

Check if its necessary to refill with dishwasher salt or rinse aid. Load cutlery and dishes into the dishwasher. Fill with dishwasher detergent. Select a wash programme suitable for the cutlery and dishes. Start the wash programme.
loading cutlery and dishes electrolux 15
Loading cutlery and dishes
Sponges, household cloths and any object that can absorb water may not be washed in the dishwasher. Before loading the dishes, you should: Remove all left over food and debris. Soften remnants of burnt food in pans When loading the dishes and cutlery, please note: Dishes and cutlery must not impede the rotation of the spray arms. Load hollow items such as cups, glasses, pans, etc. with the opening downwards so that water cannot collect in the container or a deep base. Dishes and items of cutlery must not lie inside one another, or cover each other. To avoid damage to glasses, they must not touch. Lay small objects in the cutlery basket. Plastic items and pans with non stick coatings have a tendency to retain water drops; these items will not dry as well as porcelain and steel items. Light items (plastic bowls etc.) must be loaded in the upper basket and arranged so they do not move.

For washing in the dishwasher the following cutlery and dishes are not suitable: are of limited suitability: Cutlery with wooden, horn, china or Only wash stoneware in the mother-of-pearls handles. dishwasher if it is specially marked as being dishwasher-safe by the Plastic items that are not heat resistmanufacturer. ant. Glazed patterns may fade if machine Older cutlery with glued parts that are washed frequently. not temperature resistant. Silver and aluminium parts have a Bonded cutlery items or dishes. tendency to discolour during wash Pewter or copper items. ing: Residues, e.g. egg white, egg Lead crystal glass. yolk and mustard often cause disco Steel items prone to rusting. louring and staining on silver. There Wooden platters. fore always clean left-overs from silver immediately, if it is not to be washed Items made from synthetics fibres. straight after use.
16 electrolux loading cutlery and dishes

The lower basket

The lower basket is designed to take saucepan, lids, plates, salad bowls, cutlery ect. Service dishes and large lids should be arranged around the edge of the basket, ensuring that the spray arms can turn freely.
unloading sharp items such as knives. Forks and spoons should be placed in the removable cutlery basket with the handles facing downwards and the knives with their handles facing upwards.

The cutlery basket

If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. Mix spoons with other cutlery to prevent them from sticking together. For best results we recommend you to use the cutlery grid. If the size and dimensions of the cutlery do not allow the use of the grid, they can be easily removed.
Long bladed knives stored in an upright position are a potential hazard. Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket. Take care when loading or
loading cutlery and dishes electrolux 17 Glasses with long stems can be placed upside down in the cup racks. For taller items, the cup racks can be folded upwards.

The upper basket

The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 24 cm in diameter), salad bowls, cups and glasses Arrange items on and underneath the cup racks so that water can reach all surfaces.
Before closing the door, ensured that the spray arms can rotate freely.
Adjusting the height of the upper basket
If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position.
Maximum height of the dishes in: the upper basket With upper basket raised 20 cm With upper basket lowered 24 cm the lower basket 31 cm 27 cm 1. Move the front runner stops (A) of the upper basket outwards and slide the basket out.

To move to the higher position proceed as follows:
18 electrolux use of detergent 2. Refit the basket in the higher position and replace the stops (A) in their original position.
When the upper basket is raised you will not be able to use the cup racks.
After loading your machine always close the door, as an open door can be a hazard.

Use of detergent

Only use detergents specifically designed for use in dishwashers. Please observe the manufacturers dosing and storage recommendations as stated on the detergent packaging.
Using no more than the correct amount of detergent contributes to reducing pollution.

Fill with detergent

1. Open the lid.
2. Fill the detergent dispenser (1) with detergent. The marking indicates the dosing levels: 20 = approximately 20 g of detergent 30 = approximately 30 g of detergent.
use of detergent electrolux 19 Detergent tablets from different manufactures dissolve at different rates. For this reason, some detergent tablets do not attain their full cleaning power during short washing programmes. Therefore, please use long washing programmes when using detergent tablets, to ensure the complete removal of detergent residuals.
Use of combi detergent tablets
3. All programmes with prewash need an additional detergent dose (5/10 g) that must be placed in the prewash detergent chamber (2). This detergent will take effect during the prewash phase. When using detergent tablets; place the tablet in compartment (1) These products are detergents with a combined cleaning, rinsing and salt functions. They can also contain other different agents depending on which kind of tablets you choose (3 in 1, 4 in 1, 5 in 1 etc.). 1. Check whether these detergents are suitable for your water hardness. See the manufacturers instructions. 2. Select the lowest setting for water hardness and rinse aid dosage. 3. Before the start of the washing programme put the combi detergent tablet in the detergent dispenser.
4. Close the lid and press until it locks in place.

The refilling of the salt container and the rinse aid dispenser are no longer necessary. In this case the rinse aid indicator light will always remain illuminated when the machine is switched on (not all dishwasher models are foreseen with rinse aid indicator light).

Detergent tablets

20 electrolux select and start a washing programme 1. Fill up the dispensers for salt and rinse aid again. 2. Adjust the water hardness setting to the highest setting and perform washing programme without loading any dishes. 3. Adjust the water hardness setting according to the hardness of the water in your area. 4. Adjust the rinse aid dosage.
If the drying results are not satisfactory we recommend that you: 1. Fill up the rinse aid dispenser with rinse aid. 2. Set the rinse aid dosage to position 2. If you decide to turn back to the use of the standard detergent system we advise that you:
Select and start a washing programme
1. Check that the baskets have been loaded correctly and that the spray arms are free to rotate 2. Check that the water tap is opened 3. Close the dishwashers door. 4. Turn the programme knob until the programme marker corresponds with the desired programme (see "Washing programmes" chart). The On/Off indicator light illuminates. The indicator lights of the phases foreseen for the programme start flashing. 5. Press the start/cancel button, the programme starts automatically and the start/cancel indicator light illuminates. As soon as the programme starts, the phase indicator lights turn off except for the indicator light for the phase in progress which will remain lit with a static light.
During the running of the programme, it is not possible to change the selection made by turning the programme knob in correspondence of another programme or the Off position. If you want to change the running programme you must cancel the selection made (see "Cancel a washing programme in progress").
Setting and starting the programme with "delay start"
Allows the start of the programme to be delayed by 3 hours.
select and start a washing programme electrolux 21 1. After having selected the washing programme, press the delay start button. The corresponding indicator light illuminates. 2. Press the start/cancel button, the countdown of the delay start begins automatically. The phase indicator lights turn off. The opening of the door will not modify or interrupt the countdown. Once the delay start has elapsed the washing programme will start automatically, the delay start indicator light turns off while the indicator light of the phase in progress illuminates. Cancelling the "delay start" Press the start/cancel button for about 5 seconds, the indicator lights of start/cancel and delay start buttons turn off while the indicator lights of the phases start flashing. To start the selected washing programme press the start/cancel button.

Interrupt or cancel a washing programme in progress ONLY if its absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully. Interrupt a washing programme in progress: Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. Cancel a washing programme in progress Press the start/cancel button for about 5 seconds. The start/cancel indicator light turns off and the phase indicator lights are flashing. The running programme has been cancelled and it is now possible to set a new washing programme or switch off the machine. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. End of the washing programme The dishwasher will automatically stop. The end of programme indicator light will illuminate. 1. Switch off the dishwasher by returning the programme knob to the Off position. The On/Off indicator light turns off. 2. Open the dishwashers door, leave it ajar and wait a few minutes before removing the dishes; in this way they
The washing programme or the countdown of the delay start will begin only after having pressed the start/cancel button. Until that moment it is possible to modify the selection made.
22 electrolux unloading the dishwasher will be cooler and the drying will be improved.

Unloading the dishwasher

Hot dishes are sensitive to knocks. The dishes should therefore be allowed to cool down before removing from the appliance. Empty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. Water may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes.
When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off.

Washing programmes

Programme A Intensive 70 Degree of soil Heavy soil Type of load Crockery, cutlery, pots and pans Programme description Prewash Main wash up to 70C 2 intermediate rinses Final rinse Drying Prewash Main wash up to 65C 2 intermediate rinses Final rinse Drying

B Normal 65

Normal soil
Crockery, cutlery, pots and pans
care and cleaning electrolux 23 Programme C Quick

Degree of soil

Type of load

Programme description

Normal or light soil Crockery and cut- Main wash up to lery 60C Final rinse Normal soil Crockery and cut- Prewash lery Main wash up to 50C 1 intermediate rinse Final rinse Drying

D Eco 50

E Rinse and Hold
Any. 1 cold rinse (to Partial load (to be completed later in the avoid food scraps day). from sticking together). This programme does not require the use of detergent.

Internal cleaning

Ensure that the seals around the door, the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend every 3 months to run the wash programme for heavy soiled dishes using detergent but without dishes.
26 electrolux something not working

Something not working

The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the Fault code and malfunction continuous flashing of the start/cancel indicator light 1 flash of the end of programme indicator light The dishwasher does not fill with water indications described in the chart, without calling out an engineer. Switch off the dishwasher, open the door and carry out the following suggested corrective actions. Possible cause and solution The water tap is blocked or furred with limescale Clean the water tap The water tap is turned off Turn the water tap on The filter (where present) in the threaded hose fitting at the water inlet valve is blocked Clean the filter in the threaded hose The water inlet hose has not been correctly laid or it is bent or squashed Check the water drain hose connection The sink spigot is blocked Clean out the sink spigot The water drain hose has not been correctly laid or it is bent or squashed Check the water drain hose connection
continuous flashing of the start/cancel indicator light 2 flashes of the end of programme indicator light The dishwasher will not drain
continuous flashing of the start/can- Anti-flood device is activated Close the water tap and contact your cel indicator light 3 flashes of the end of programme local Service Force Center. indicator light
something not working electrolux 27 Fault code and malfunction The programme does not start Possible cause and solution The dishwashers door has not been properly closed Close the door The main plug is not plugged in Insert the main plug The fuse has blown out in the household fuse box Replace the fuse Delay start has been set If dishes are to be washed immediately, cancel the delay start This information can be found on the rating plate located on the side of the dishwasher door. So that you always have these numbers at hand, we recommend you to make a note of them here: Mod. :. PNC :. S.N. :.
Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted. If the malfunction or fault code reappears contact the Service Force Centre. For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).

28 electrolux something not working The wash results are not satisfactory The dishes are not clean The wrong washing programme has been selected. The dishes are arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arms do not rotate freely due to incorrect arrangement of the load. The filters in the base of the washing compartment are dirty or incorrectly positioned. Too little or no detergent has been used. Where there are limescales deposits on the dishes; the salt container is empty or the incorrect level of the water softener has been set. The drain hose connection is not correct. The salt container cap is not properly closed. Rinse aid was not used. The rinse aid dispenser is empty.
The dishes are wet and dull
There are streaks, milky spots or a blu- Decrease rinse aid dosing. ish coating on glasses and dishes Water drops have dries onto glasses and dishes Increase rinse aid dosing. The detergent may be the cause. Contact the detergent manufacturers consumer care line.
If after all these checks, the problem persists, contact your local Service Force Centre.
technical data electrolux 29

Technical data

Dimensions Electrical connection Voltage - Overall power Fuse Water supply pressure Capacity Max. weight Noise level Width x Height x Depth (cm) 60,0 x 85,0 x 61,0
Information on the electrical connection is given on the rating plate on the inner edge of the dishwashers door. Minimum - Maximum (MPa) place settings kg dB(A) 0,05 - 0,40,5 49

Consumption values

Consumption values Programme Programme duration (in minutes) 85-95 105-Energy consumption (in kWh) 1,8-2,0 1,5-1,7 0,9 1,05 Water (litres)
Intensive Normal Quick 30'

22-25 23-18

ECO (Test pro140 gramme for Test Institutes) Rinse and Hold 12
The consumption values are intended as a guide and depends on the
pressure and the temperature of the water and also by the variations of the power supply and the amount of dishes.
30 electrolux hints for test institutes
Hints for test institutes
Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Consumption values"). Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Consumption values").
Full load: 12 standard place settings Amount of detergent required Rinse aid setting 5 g + 25 g (Type B) position 4 (Type III)
Lower basket Cutlery basket
installation electrolux 31

cup racks: position A

Upper basket
Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Remove all packaging before positioning the machine. If possible, position the machine next to a water tap and a drain.
Fitting under a counter (kitchen worktop or sink)
By removing the machines worktop, you can install it under a close fitting sink unit or a pre-existing top, providing the dimensions of the recess correspond to those shown in the picture.

Proceed as follows:

32 electrolux installation Remove the machines worktop by unscrewing the two rear retaining screws, pull the worktop from the back of the machine and slide out the front slots, lifting the worktop.

Water supply connections

This dishwasher may be fed with either hot (max. 60) or cold water. Nevertheless we advise you a cold water supply. A hot water supply is not always efficient with very soiled crockery as it shortens the washing programmes a lot. For making the connection itself, the coupling nut fitted to the machines supply hose is designed to screw onto a 3/4" gas thread spout or to a purpose made quick-coupling tap such as the Press-block. The water pressure must be within the limits given in the "Technical specifications". Your local Water Authority will advise you on the average mains pressure in your area. The water inlet hose must not be kinked, crushed, or entangled when it is being connected. The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. (Attention! NOT all models of dishwashers have fill and drain hoses provided with locknut. In this case, this kind of facility is not possible). If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. DO NOT use connection hoses which have previously been used for an old appliance.
Insert the machine after adjusting the levelling with the adjustable feet. When inserting the machine, ensure that the water inlet and drain hoses are not kinked or squashed. During all operations that involve accessibility to internal components the dishwasher has to be unplugged. Be sure that once the appliance has been installed, it is easily accessible for the service engineer in the event that a repair is required. If the dishwasher is later used as a freestanding appliance, the original worktop must be re-mounted. The plinth on free-standing appliances is not adjustable.

Levelling

Good levelling is essential for correct closure and sealing of the door. When the appliance is correctly levelled, the door will not catch on either side of the cabinet. If the door does not close correctly, loosen or tighten the adjustable feet until the machine is perfectly level.
installation electrolux 33
This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. This appliance complies with the applicable plumbing regulations.
Water outlet hose connection
The end of the drain hose can be connected in the following ways: 1. To the sink outlet spigot, securing it to the underside of the work surface. This will prevent waste water from the sink running into the machine. 2. To a stand pipe provided with venthole, minimum internal diameter 4 cm. The waste connection must be at a height of between 30 cm (minimum) and 100 cm (maximum) from the bottom of the dishwasher. The drain hose can face either to the right or left of the dishwasher. Ensure the hose is not bent or squashed as this could prevent or slow down the discharge of water. The sink plug must not be in place when the machine is draining as this could cause the water to syphon back into the machine. If you use a drain hose extension it must be no longer than 2 metres and its internal diameter must be no smaller than the diameter of the hose provided.
Likewise the internal diameter of the couplings used for connections to the waste outlet must be no smaller than the diameter of the hose provided. When connecting the drain hose to an under sink trap spigot, the entire plastic membrane (A) must be removed. Failure to remove all the membrane will result in food particles building up over time eventually blocking the dishwasher drain hose spigot.
Our appliances are supplied with a security device to protect against the return of dirty water back into the machine. If the spigot of your sink has a "no return valve" incorporated this can prevent the correct draining of your dishwasher. We therefore advise you to remove it.
34 electrolux environment concerns

Electrical connection

Safety standards require the appliance to be earthed. Prior to using the appliance for the first time, ensure that the rated voltage and type of supply on the rating plate match that of the supply where the appliance is to be installed. The fuse rating is also to be found on the rating plate. Always plug the mains plug into a correctly installed shockproof socket. Multi-way plugs, connectors and extension cables must not be used.
This could constitute a fire hazard through overheating. If necessary, have the domestic wiring system socket replaced. In case that the electrical cable has to be replaced, contact your local Service Force centre. The plug must be accessible after the appliance has been installed. Never unplug the appliance by pulling on the cable. Always pull the plug. The manufacturer accepts no liability for failure to observe the above safety precautions.

Environment concerns

Packaging material
The packaging materials are environmentally friendly and can be recycled. The plastic components are identified by markings, e.g. >PE<, >PS<, etc. Please dispose of the packaging materials in the appropriate container at the community waste disposal facilities. Dispose of the door catch. This prevents children from trapping themselves inside and endangering their lives. The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it should be taken to the appropriate collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of
When a unit is no longer being used: Pull the plug out of the socket. Cut off the cable and plug and dispose of them.
environment concerns electrolux 35 this product, please contact your local council, your household waste disposal service or the shop where you purchased the product.

36 electrolux

electrolux 37

38 electrolux

www.electrolux.com
www.electrolux.com.my www.electrolux.com.sg

 

Tags

HBH-PV703 Touch PRO Gigaset S44 Infiniti J30 Space 51 VL6-E FS-1028MFP LD-2131SH L-358 Shure SM58 Socket SET Palm M125 DVA-5205P YHT-185 LG-G510 EH-TW420 GSP100 XG-MB70X TR-505 SH24ZS6ax-XSA TX-P42v10E Alesis Adat TL-01 Coupe Review VGN-NS21m P CDM-120 TX-15AT1 Of GO Avimeca Excel 50 14PT1342 58 FAX-LAB 210 Personal RR-QR270 S230I Irci-5400Z LSU305HV HR-V505 Optio E70L DV352 IC-F25SR M1774 PSR-83-PSR-82 KX-TG7200FX PDC 3070 SDC-K60R C3053 Korg NS5R SGH-T339 DEH-1100MPB HT-X720G AR-153E 157E ELU BM7 FWM185 12 HD7110 CD1401B-06 Player LA-22 ZBF360X Canon I320 SA-HT400 Nuvi 265T - C800 Twintop DCT7585 DI5510 SR-L39nebs 50500W FL908 Legend MZ-R37 DN-D6000 LD-14AT1 Custom Vector 300 WL-014 L227WTP-PF CS-205 200LX KDC-MP819 IC-F3GS Mewam DK7942P LC26GA5E WF-660 Directroute LE32R87 Soccer 2005 1000P DV4100 Plus C KV-1485 VP-D385I Colour EZ800-S Coupe GR-DVL720u-gr-dvl720 TXP42V10E NAD T512 W 101

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101