CLASS 1 LASER PRODUCT

Laser product symbol: located on the rear panel of the unit, indicate this player is a class laser product, only use weak laser and no hazardous radiation outside of the unit. 1. Read through this instruction manual before installation and use. 2. Do not touch the power plug with wet hand. 3. Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc from the unit/ tray first. 4. Do not open the cover or touch any of the components exposed out of the unit, only for qualified technicians. 5. Do not expose the unit under direct sunlight or nearby objects that radiate heat to avoid damage the unit. 6. Do not place the unit in moist and humid conditions, which effect the pick-up of the unit lead to out of work. 7. Place the unit on a flat surface and ventilative condition. Please ensure the ventilation holes are not covered to avoid overheating and malfunction. 8. Clear the panel and case with soft dry cloth only, do not apply any kind of thinner, alcohol or sprays. 9. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus 10. unplug the apparatus when not using for a long time oriented to disconnect from the Mains power Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other intellectual property rights owned by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. DOLBY PROLOGIC: Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories.

Page 23

Contents
1. Precautions. 23 2. Front Panel and Rear Panel Illustration. 24 3. Remote Control. 25 4. Connections. 26 5. Function Operation. 28 6. MP3/WMA/DivX Playing. 31 7. Kodak Picture CD Playback. 32 8. USB/Card Reader Operation. 32 9. System Setup. 33 10. Troubleshooting. 38 11. Technical Specification. 39 12. Recycling. 39

1. PRECAUTIONS

Before using this unit, be sure to read the applicable items of the operating instructions and these safety suggestions carefully. Afterwards keep them handy for future reference. Take special care to follow the warnings indicated on the unit itself as well as in the operating instructions. Safety Power Source-The unit should be connected to power supply only of the type described in the operating instructions or as marked on the unit. Environment 1. Water and moisture do not use this unit near water. For example, near a bathtub, wash bowl, swimming pool, or the like, Damp basements should also be avoided. 2. Condensation-moisture may form on the lens in the following conditions. Immediately after a heater has been turned on. In a steamy or very humid room. When the unit is suddenly moved from a cold environment to a warm one, if moisture forms inside this unit, it may not operate properly, to correct this problem wait about one hour for the moisture to evaporate. 3. Heat never use or place this unit near a heat source. Do not leave it in an automobile exposed to direct sun light for a long time with the doors and windows closed as this may deform the cabinet.

Page 24

2. FRONT PANEL AND REAR PANEL ILLUSTRATION

Front panel

1. Power 2. LED Screen 3. Disc Tray
4. Open/Close 5. Play 6. Pause
7. STOP 8. USB Card Reader 9. 4 in 1 Card Reader

Rear panel

1. Downmix Left 2. Downmix Right 3. HDMI Output
4. Coaxial Output 5. Component Video Output 6. Composite Video Output
7. S-video Output 8. 5.1 Channel Audio Output 9. Scart Output

LED Illustration

1. DVD/VCD/MP3 disc indication 2. PBC indication 3. Chapter-Time indication
4. Dolby indication 5. Play indication 6. Pause indication
7. Disc reading indication 8. Repeat indication 9. DTS indication

Page 25

3. REMOTE CONTROL
1. STANDBY 2. USB/CARD 3. AUDIO 4. Numeric button 5. CLEAR 6. SETUP 7. UP button 8. LEFT button 9. DOWN button 10. REV 11. FWD 12. STEP 13. STOP 14. VOLUME +/15. L/R 16. N/P 17. SLOW 18. V-MODE 19. HD/Res. (HD-Mode) 20. PROGRAM 21. OPEN/CLOSE 22. SEARCH 23. SUBTITLE 24. MENU 25. TITLE 26. DISPLAY 27. RIGHT button 28. ENTER button 29. NEXT 30. PREV 31. PLAY/PAUSE 32. A-B 33. REPEAT 34. MUTE 35. ANGLE 36. PBC 37. RETURN 38. ZOOM
Using the Remote Control Unless stated other wise, the remote control can operate all the features of the DVD Player, Always point the remote control directly at the remote sensor on the front of the DVD Player, not the TV. Battery Installation Remove the battery compartment lid on the rear of the remote control by sliding the lid down, then off. Place two AAA batteries inside the battery compartment with their + and ends aligned as indicated. Do not mix old and new batteries or different types of batteries Replace the battery compartment lid. Slide the lid until you hear it click into place.

Page 26

4.CONNECTIONS
Turn off the power before connection. Turn on the power after finishing connection. Wires must be firmly connected; especially the plug shall be fully inserted. DVD+TV Notes: There are the following ways of connecting the player AV output to the TV set: S-video cable and left/right audio cable (set the video type to component) Composite video cable and left/right audio cable Component video cable and left/right audio cable (set the video type to component, if you connecting a progressive scan TV set, please set the video type to P-Scan) Scart cable (press V-MODE button to switch the video mode to and set the video type to RGB) HDMI cable(press V-MODE button to switch the video mode and set the video type to HD)

Page 27

DVD+AV Amplifier Notes: There are the following ways of connecting the player with amplifier: Left/right audio output 5.1 channel audio output Coaxial audio output

Page 28

Warning: Do not connect any amplifier with coaxial connector that does not contain Dolby digital AC 3 or DTS decoder. Any attempt to do so and play of DVD disc will result in damaging your speakers and causing possible hearing injury. Other than DVD disc, VCD and CD can be operated normally without conforming to the above restriction. Setting of TV system If you find the image like non-fully zoomed picture, brim picture covered or black & white picture etc, please select PAL or NTSC by systems setting or press N/P button to switch the TV system on the remote control. This DVD disc is capable of supporting different scales picture, as a result, non-full zoomed picture could appear or picture be partially covered on users TV set.

5. FUNCTION OPERATION

5.1 Function Buttons On the Front Panel These buttons function is the same as the corresponding buttons on the remote control. For the detail information, please see the following texts. 5.2 Function Buttons On the Remote Control STANDBY Press the button once and the player will go into standby state. Press the button again and the player will resume Operating as before. USB/CARD Press the button to choice USB disk or Card memory source input. Note: The button is available while the player is in stop or no disc state. OPEN/CLOSE To open the disc tray, press OPEN/CLOSE; To close the disc tray, press OPEN/CLOSE again. AUDIO Press the button to choose different dubbing languages. (Requires disc support) SUBTITLE Press the button to display different captions (Requires support from disc) SEARCH For DVD discs, press the button to choose the desired title and chapter and search the desired title time and chapter time. For Super VCD, VCD, CD discs, press this button to search the desired disc time and track time and choose the desired track 0-9 keys These keys are used to input the time, as well as title, chapter and track numbers. When a numeric item is displayed on the screen, press the 0-9 keys to select the desired entry, and press ENTER to confirm. When a CD or VCD is playing (with PBC off), press the 0-9 keys to select a track directly, then press ENTER to confirm. CLEAR Press CLEAR to delete numbers you have entered. Press once to delete one digit, press and hold to delete all digits. MENU During DVD playback, press MENU to display the disc menu of the current title. Note: This function is subject to the disc SETUP Press the button to enter the system setting menu. press the button again to exit the menu. DISPLAY Press the button to show the information of the current playing disc.

Page 29

TITLE Press the button to enter the appointed title. (Requires disc support) Direction key(UP/DOWN/RIGHT/LEFT) Press the keys to move the highlighted bar or cursor on any menu to your selection. ENTER Press the button to confirm your choice on screen. REV During DVD, CD or VCD playback, press REV to scan in reverse. The player will review the disc at different times speed. Press PLAY to resume normal playback. FWD During DVD, CD or VCD playback, press FWD to scan forward. The player will cue the disc at different speed. Press PLAY to resume normal playback. PREV During DVD, CD or VCD playback, press PREV to play the previous chapter, title or track. NEXT During DVD, CD or VCD playback, press NEXT to play the next chapter, title or track. STEP Press the key, You can play the disc step by step, in this way, you can catch any picture on the disc (not for mp3, CD). Press Play button to play normally. STOP Press the button once and the player will be in memory stop state. Continuously press this button twice and the player will be in complete stop state. PLAY/PAUSE In play state, press the button for the first time and the player will be in pause state. To resume normal playback press the button again, In pause state or stop state, press the button, the player will be in playing state. VOLUME +/Press + to increase volume and press to decrease volume. REPEAT Each press of the REPEAT button will change the repeat mode. During VCD,CD playback, there are three modes: repeat Single, repeat All and Off. During DVD, playback, there are three modes: Repeat Chapter, Repeat Title and Off. Note: During VCD playback, the PCB mode must be set to Off A-B During playback, press A-B to select point A, press it again to select point B. The player will repeat the section from A to B automatically. Press A-B a third time to cancel A-B repeat and clear points A and B. Note: During CD/VCD/SVCD playback, points A and B must be within the same track. During DVD playback, points A and B can be selected from different chapters. ANGLE Press the button to view scenes shot from ANGLE difference angles. (Disc support is required) MUTE Press MUTE to turn off the audio, press MUTE again to resume normal sound.

Page 30

L/R During VCD/SVCD playback, press L/R repeatedly to select the channel of audio-output: Left/Right/Mix/Stereo. N/P Press the button on the remote control and choose or Auto NTSC PAL for the TV system. PBC During VCD/SVCD playback, Press PBC to select the mode of PBC On or PBC Off. SLOW During DVD, VCD or SVCD playback, press SLOW for slow motion playback. Once you press SLOW, the disc will play at different speed. Press PLAY to resume normal playback. V-MODE Press V-MODE key, you can select different video output mode (YUV, RGB, etc.). If you get no picture when using the SCART connector, repeatedly press V-MOE until you get a picture. RETURN When SVCD/VCD disc playing, press RETURN button to the main menu (PBC ON only). HD/Res.(HD-Mode) Press the button to switch HD video output resolution Note: Under HD mode, this button is used to select the output resolution. Your DVD player can generate some resolutions that may not be supported by your TV set. If this happen ,your TV screen will probably turn black. To solve the problem, please repeatedly press HD/Res. button until you select a resolution that can be well supported by your TV set.

PROGRAM

In complete stop state (press STOP button twice), press PROGRAM button enter the Play Mode menu Mode Normal: Shuffle mode is cancelled Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track, playback jumps to a random chapter/track. As the end of each chapter/track is reached, another random chapter/track will be played until all tracks/chapters have been played or the Shuffle mode is cancelled by toggling to a different "Mode" option. PROGRAM: To enable programmed playback mode

Page 31

Repeat Off: Repeat mode disabled. Single: Repeat current chapter/track. (When playback reaches the end of the current chapter/track, playback jumps back to the beginning of the chapter/track.) All: Repeat entire title. Play Select to start program playback Clear Program Clear Program playback Move the highlighted bar to the Mode position, press ENTER to select Program mode Press Direction key (LEFT or RIGHT) move the cursor to the numeric input column, press 0-9 key to input the title and chapter or track to select Press Direction key (UP or DOWN) move the cursor to PLAY column, press ENTER to start program playing program playing,. If you want to exit the program playing, select Clear program and press ENTER to exit ,press PLAY to resume normal playing. Note: This function is valid in complete stop status. ZOOM As you press the button you view the different ZOOM magnifications of the picture. Note: This function may differ for different types of discs

6. MP3/WMA/DivX PLAYING

Page 32
The MP3/WMA/DivX disc has such a directory structure as shown in the right picture. Press Direction key to choose the root directory and then press ENTER button to enter into the sub directory. Press Direction key keys to choose the desired track and then press ENTER or PLAY to enjoy the music or movie. If you want to return to the upper menu, press Direction key to choose Go Up. the icon and press ENTER button. Filter: Allows selecting the categories of files displayed in the browser list. This selection is done among the 3 categories: Audio, Photo and Video. Repeat: To switch different repeat playing mode Mode: Select different playing mode Normal: Shuffle mode is cancelled Shuffle: Shuffle mode enabled. When playback reaches the end of the current chapter/track, playback jumps to a random chapter/track. As the end of each chapter/track is reached, another random chapter/track will be played until all tracks/chapters have been played or the Shuffle mode is cancelled by toggling to a different "Mode" option. Intro: In this mode, the media will play 10 seconds then skip to next media Edit Mode: To enable programmed playback mode. When you select the mode, press LEFT Direction key to directory and press ENTER to choose the desired track and press Add to program to start program playback. Program view: Display program track Brower view: Display track directory Add to program: Choice the track press Add to program to add the track of the program play directory Clear program: Choice the track press Clear program to delete the track of the program play directory
7. KODAK PICTURE CD PLAYBACK
The KODAK PICTURE CD disc has such a directory structure as shown in the right picture.
Press Direction key to choose the root directory and then press ENTER button to enter into the sub directory. Press Direction key keys to choose the desired picture and then press ENTER or PLAY to enjoy the picture. If you want to return to the upper menu, press Direction key to choose Go Up. the icon and press ENTER button. Image rotation In picture play state, press Direction key to rotation the picture, press ANGLE button to change the picture scan mode.

8. USB/CARD READER OPERATION
Power on your DVD player. Insert your USB disk or card memory, press USB/CARD button to choice the USB disk or Card memory source device input, Press Direction key to move ,Press ENTER button to confirm your choice. When you choice the file from the USB disk or Card memory device ,the DVD player will automatically play the media file. Note: The button is valid in complete stop or NO DISC status.

Page 33

9. SYTSTEM SETUP
DVD menu setup Press the SETUP button on the remote control, the SETUP MENU (main) will be displayed. After accessing the setup menu, press the direction buttons for up and down movement to select an item desired, then press the ENTER button to confirm.Press LEFT direction button return to the menu of upper level. To exit the setup, press the SETUP button again. In the SETUP MENU, you may choose any of the following options as you like. 9.1 LANGUAGE SETUP Select Language in the setup menu, and display the Language submenu:
9.1.1 OSD Language Use this item to select the language of the setup menu and screen display. 9.1.2 Subtitle This option provides the preset subtitle language. Follow the operating instructions stated in "DVD MENU SETUP" in combination with the desired option. 9.1.3 DivX Subtitle DivX Subtitle setting is used for choosing the language domain, (only for DivX). After select one language domain (alphabet), when playback a DivX with external subtitle, the subtitle display will use this language alphabet. if you find the displaying subtitle words arent correctly, please ensure the external subtitle language and select the correct language. 9.1.4 Audio Follow the operating instructions stated in "DVD MENU SETUP" in combination with the desired option. This option provides the built-in disc dubbing language options. 9.1.5 DVD Menu This option provides the film's menu language options. Follow the operating instructions stated in "DVD MENU SETUP" in combination with the desired option.

Page 34

9.2 VIDEO SETUP Select Video in the setup menu, and display the Video submenu:
9.2.1 Aspect Ratio 4:3: Choosing this setting if your DVD player is connected to a normal ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts of the picture (the left and right edges) wont be seen. 16:9: Choose this setting if your DVD player is connected to a wide screen TV. If you choose this setting and you dont have a wide screen TV, the images on the screen may appear distorted due to vertical compression. Notes: The image display ratio is related to the recorded disc format. Some disc can not display images in the aspect ratio you choose. If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on the left and right side of the screen. You must adjust the screen setting depending on the type of the television you have. 9.2.2 View Mode With this option you can select the different video vision mode on the screen. 9.2.3 TV System This product supports output of various system, including AUTO, NTSC, PAL. If your TV set has only NTSC or PAL system, the screen will blink and become colorless when a wrong system is selected. In this case, press the N/P button on the Remote Control to switch the TV TYPE. Note: For more information of output format, refer to the instructions or your TV set. 9.2.4 Video Output Selecting the Video Output setting to switch between different video outputs Component: Set the video output to interlacing component output. RGB: Set the video output to SCART output. If you select SCART connection, you should set up the play mode as RGB state, then it will output normally. P-Scan: Set the video output to progressive component output HD: Set the video output to high definition output Note1: When the player is connected to a TV set of progressive scanning though YPbPr, select P-SCAN. When it is connected to a common TV set, select Component. If TV screen has no output after selecting P-SCAN, you can press V-MODE button to switch the state, it will output normally. If you select SCART connection, you should set up the play mode as RGB state, then it will output normally. If you select HDMI connection, you should set up the play mode as HD state, then it will output normally. Note2: Set video output type to Component, RGB or P-Scan. HD resolution menu should be disabled. HDMI should stop working HD JPEG mode menu should be disabled. Note3:Set video output type to HD. HD resolution menu should be enabled and set to Auto responding to this action. HD/Res. key is valid to switch HD resolution only at this case. HDMI module can work only at this case. No CVBS at HD resolution No OSD and sub-picture at HD-JPEG mode

Page 35

9.2.5 Brightness Press the LEFT and the RIGHT direction button to adjust the player video output brightness. 9.2.6 Sharpness Press the LEFT and the RIGHT direction button to adjust the player video output sharpness. 9.2.7 Smart Picture To select different image brightness output mode 9.2.8 HD Resolution Used to set the resolution of HDMI image output. In this option, you can select different HDMI image resolution. Note: If TV screen has no output after selecting HD Resolution, you can press SETUP once then press V-MODE button or restart the player and press V-MODE button to switch the state, it will output normally. 9.2.9 HD Jpeg Mode Select ON or OFF to to switch HD JPEG play mode Note 1: HDMI is plugged out when HD-JPEG is being played. System should change into 480p/576p and return to browser menu if HD resolution is Auto System should return to browser menu if HD resolution is not Auto Note2: HDMI is plugged out when DVD is being played. System should change into 480p/576p and continue playing if HD resolution is Auto System should continue playing if HD resolution is not Auto. 9.3 Audio setup Select Audio in the setup menu, and display the Audio submenu.
9.3.1 Bass Management To enable or disable the Bass Management during operation of the player. On = Enable the Bass Management. Off = Disable the Bass Management. 9.3.2 Front Speaker To adjust the front speakers output to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player. When Bass Management is On, the following options are available: Large: Support signal frequency lower than 200Hz Small: Support signal frequency higher than 200Hz If the connected speaker supports signal lower than 200Hz, it is best to select Large: If not, you shall select Small.

Page 36

9.3.3 Center Speaker Selection of Large or Small is same with that of front speaker. The speaker will have no signal output if set to None. Notes: If the Subwoofer is On, Center is set to None or Small, and bass from the center channel is redirected to the subwoofer. If the content contains a discrete subwoofer channel, it is also sent to the subwoofer. If the Subwoofer is Off, Center is set to None or Small, and bass from the center channel is redirected to the left and right channels. If the content contains a discrete subwoofer channel, it is discarded. 9.3.4 Surround Speaker Selection of Large or Small is same with that of front speaker. The speaker will have no signal output if set to None. Notes: If the Subwoofer is on, Surround is set to None or Small, and bass from the surround channels is redirected to the subwoofer. If the content contains a discrete subwoofer channel, it is also sent to the subwoofer. If the Subwoofer is Off, Surround is set to None or Small, and bass from the surround channels is redirected to the left and right channels. If the content contains a discrete subwoofer channel, it is discarded. 9.3.5 Subwoofer Selecting to enable/disable the subwoofer output when 6 Channel analog output is used. The following options are available: None Subwoofer is off. Bass from center and surround channels is redirected to the left and right channels. If the content contains a discrete subwoofer channel, it is discarded. Present Subwoofer is on. Bass from center and surround channels is redirected to subwoofer. If the content contains a discrete subwoofer channel, it is also sent to the subwoofer. Note: Bass Management is not available for MP3 or WMA bitstream ; therefore, it will be disabled during the playback of those streams. 9.3.6 Test Tone Selecting the Test Tone setting allows the user to test the players audio output on each speaker. When you select channel, a short burst of pink noise will be sent to corresponding channel 9.3.7 Center Delay Selecting the Center Delay setting allows the user to enable/disable the center output delay. 9.3.8 Surr. Delay Selecting the Surr. Delay setting allows the user to enable/disable the center output delay. 9.3.9 Digital output Selecting the Digital Output setting allows the user to adjust the audio output on S/PDIF ports to work in harmony with the audio equipment (e.g. receiver, speakers) connected to the player. Off Digital audio output is disabled. PCM Select this option when you are going to use stereo signals (2 channels). You should combine this option with the option "Lower sampling rate," which we explain further on All If you select this option the player will use the DVD's original audio track. Use this option when you want to use the Dolby Digital AC3 signals through the optical or coaxial audio output. 9.3.10 Night Mode To adjust the linear compression ratio , select to ON when playing a disc in the day so as to get better acoustical effect; while at night, you can select to OFF. 9.3.11 Prologic Off: Pro Logic decoding is off. Two-channel sources are output only on the left and right channels. On: Enable Pro Logic decoding

Page 37

9.4 RATING SETUP Select Rating in the setup menu, and display the Rating submenu: Note: Not all DVDs support ratings.
9.4.1 Parental Control Selecting a Rating allows the user to set the parental control feature of the player Select Parental Control, and press ENTER to change the different mode. Note: Unlock the password before setting Parental Control 9.4.2 Set Password Use the 0-9 keys to input four digits (password), then press ENTER to confirm. Note: If you forget your password, please use the universal password 8888 to unlock. 9.5 MISC SETUP Select MISC in the setup menu, and display the submenu:
* Use Default Settings Reset setup data to factory default and re-load disc

Page 38

10. Troubleshooting
Please read the user s manual carefully before using the DVD player. If you have any troubles in using this player, try to solve the problems by the suggestions mentioned below. If you can not remove the trouble after using all the suggestions, please contact the company or the technical service center authorized by us. For the sake of your safety, please do not open the cover and repair the player by yourself, if that, it may cause electric shock. Problem No Picture, Indication How to solve Ensure that the power switch is on. Ensure that the wall inlet is ok. Ensure that the power cord is not damaged. Ensure that the power plug is connected to the inlet tightly. Ensure that all audio and video cables are connected according to the instructions in this manual. When connecting the TV set and DVD Player with an HDMI cable, ensure that you set both devices to HD mode and set it to correct resolution. When connecting the TV set and DVD player with AV/ Scart/ S-video/YUV cable, ensure that the TV is set to the correct input, and repeatedly press V-mode button on the remote control of your DVD player to select the right output. Ensure that the player s audio output has a good connection with the TV s audio input. Check whether the audio connector is damaged. Ensure that you have set the right AUDIO setup of the player. Ensure that you have turned your TV to the AV input channel connecting to your player. Ensure that the audio is not under mute. Check whether you have turned down the volume. Ensure that the player s video output has a good connection with TV s video input. Ensure that you have turned your TV to the AV input channel connecting to your player. Check whether the video connector is damaged. Ensure that you have set the right VIDEO settings of the player. Ensure that you have set the right TV SYSTEM (e.g. PAL, NTSC) setting. Check whether the setting of AUDIO is right. Check whether the disc is scratched or stained. Check whether the AV connector and the output terminal is stained. Check whether the disc is stained or scratched badly. Ensure that you have put the disc on the tray. Check whether the disc is put in the reverse side. Check whether the disc is distorted. Check whether the disc is stained or scratched badly. Check whether the disc has had bad quality. Ensure that the disc is not stained or damaged badly. Ensure that the disc format is compatible to the player. Ensure that the disc is not deformed. Check the batteries of remote control and make sure that they are to be powerful and good conductivity. Direct the remote control to the IR sensor of the player. Check whether there are some obstacles between the remote control and IR sensor. Turn off the power, and then turn on again The disc can not be taken out of the tray when the player is reading, so you have to turn off the power and turn on again, and press OPEN/CLOSE key immediately to open the tray.

No Sound But Have Picture
No Picture But Have Sound
Black and White Picture or Screen Rolling Flaws of Picture or Sound

Display No Disc

Display Bad Disc
Remote Control is Insensitive or Does not Work
Abnormal Function Operation Disc is Locked in the Tray

Page 39

11. Technical specifications
Signal system Frequency Response Signal-toNoisy Ratio (Audio) Audio Distortion + Noise Audio Output (Analog audio) Video Output Max Resolution Power Supply Dimensions Supported Disc Accessories PAL/AUTO/NTSC 20HZ-20KHZ ( at 1KHz 0 dB) 90 dB (at 1KHz 0 dB) -60 dB (at 1KHz 0 dB) 2.0+0-1.0Vrms Composite: 1.00.2Vp-p Load impedance: 75, imbalance, negative polarity 720P/1080i ~230V 50Hz 430(mm) x 260(mm) x 38(mm) DVD/SVCD/VCD/CD/MP3/Kodak Picture/Photo CD/ DivX/Nero RCA Audio/Video cables(composite video and L-R audio) Remote Control unit User Manual Guarantee Card
REFERENCE: To protect your DVD player, the interval between two consecutive Power button operations must be above 30 seconds. No using for a period of time, please pull out the plug from the electronic outlet. The player should be operated only on condition that the type of power supply corresponds to the marking label. Otherwise, it doesnt work or even be damaged. The player may not be compatible with some encrypted discs. If the player stops playback by accident, please power it on again. Appearance and function is subject to change without notice.

12. Recycling

This product bears the selective sorting symbol for waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimize its impact on the environment. For further information, please contact your local or regional authorities. Electronic products not included in the selective sorting process are potentially dangerous for the environment and human heath due to the presence of hazardous substances.

Page 40

GUARANTEE AND CUSTOMER SERVICE
Before distribution, our appliances undergo a strict quality control. However despite all the care, should the product suffer damage in the production or transport phase, please contact the Elta customer service in Germany: 01805/355460 (0,12 EUR/Min). Under the lawful user guarantee, the consumer has, after his selection, the following guarantee: for the purchased appliance, we extend a 24-month warranty (accompanying warranty card) beginning on the day of purchase. In this time period, we will remedy all defects, demonstrably of material or manufacturing mistakes, through repair or exchange. Damage resulting from unconventional usage of the appliance and mistakes through repairs made by a third party or assembly with foreign parts, are not covered by this guarantee.

elta Service-Center Breitefeld 15 D-64839 Mnster Hotline: +49 6071/days a year Monday through Sunday
GmbH Carl Zeiss Strae Rdermark Telephone +49 6074/ 0 Fax +49 6074/ 169