ENMAB-8CM

7.1 Channel USB Audio Box Introduction:
The 7.1 channel USB audio box with digital output offers an array of features for the best surround sound experience! It supports 48/44.1 KHz sampling rate for both playback and recording, dual microphone support. The ENMAB-8CM 7.1 channel USB audio box comes with a variety of connectors for easy hook up!

Specification:

Interface Sample Rate Input Surround Audio Output Additional Audio Output USB 2.0, backward compatible with USB 1.x 48 / 44.1 KHz for recording and playback Microphone x2 , Line-in x1 , S/PDIF-in (digital) x1 7.1 / 5.1 / 2.1 channel Headphone x1 , Line-out x1 , S/PDIF-out (digital) x1

Features:

USB specification 2.0 compliant USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant Full-duplex recording and play-back 7.1 channel connector S/PDIF optical digital input and output 3.5mm jack connectors Support 48/44.1 KHz sampling rate for both playback and recording Dolby digital audio streaming via S/PDIF out Dual microphone support

Requirement:

One available USB port Minimum Intel Pentium II 350 MHz or equivalent PC with 128MB RAM Amplified computer speakers or headphone Operating System: Windows 7 / XP / 2000 / Server 2003; Windows Vista DirectX 8.1 or above CD-ROM drive

ENMAB-8CM

7.1 Channel USB Audio Box

User Manual

Features
USB specification 2.0 compliant USB audio device class spec. 1.0 and USB HID class spec. 1.1 compliant Full-duplex recording and play-back 7.1 channel connector S/PDIF optical digital input and output 3.5mm jack connectors Support 48/44.1 KHz sampling rate for both playback and recording Dolby digital audio streaming via S/PDIF out Dual microphone support

System Requirements

One available USB port Minimum Intel Pentium II 350 MHz or equivalent PC with 128MB RAM Amplified computer speakers or headphones Operating Systems: Windows 7 / XP / 2000 / Server 2003; Windows Vista DirectX 8.1 or above CD-ROM drive

Package Contents

ENMAB-8CM USB Audio Box Type A to Type B USB Cable Software Driver CD User Manual

Hardware Description

Figure 1. Buttons & Indicators
Volume Mute: Press button to mute, press again to unmute audio outputs. Microphone Mute: Press button to mute, press again to unmute microphone. Volume Down: Decreases volume. Page3
Volume Up: Increases volume. Microphone Mute LED: LED is on when microphone is unmute. Power/Activity LED: The light will be on when the ENMAB-8CM is on. The light will blink when activity is detected.
Figure 2. Connectors (Front View)
Headphones: Connects to the headphones. Line In: Connects to the TAPE/CD/DVD player or other audio sources for output mixing and/or recording. Front Speakers: Connects to the front speakers.
Surround Speakers: Connects to the surround speakers while in 4/6/8 channel modes. Center/Bass Speakers: Connects to the Center/Bass speakers while in 6/8 channel modes. Back Speakers: Connects to back speakers while in 8 channel mode.
Figure 3. Connectors (Rear View)
S/PDIF IN: Connects to the digital output of an external audio device using an optical S/PDIF cable. S/PDIF OUT: Connects to the digital input of an external audio device using an optical S/PDIF cable. USB Connector: Connects to the computers USB port. Page5
Figure 4. Connectors (Side View)
MIC (1) IN: Connects to a microphone (Mono left channel) MIC (2) IN: Connects to a microphone (Mono right channel)

Driver Installation

1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear. 2. Click the Software Driver button.
3. Click Next to begin driver installation.
4. Select Yes, I want to restart my computer now., and then click Finish to restart your computer.
Launch the Application Software
1. Double click the USB Multi-Channel Audio Device icon on the bottom right of the desktop to open the software.
2. Main Setting tab Output Device: click the correct output device for your set up. Audio System Status: display the currently audio frequency. DSP Mode: enable/disable the virtual speaker function.
3. Mixer tab Click button to choose the playback and recording devices/sources. Adjust the volume for a specific playback/recording device.
4. Effect tab In this table, you can setup the following sound effect: Environment Environment Size Equalizer Click the button again to cancel the effect.
5. Karaoke/Magic Voice table Click the ON button to enable the Karaoke function. And then check box to setup the Microphone Playback feature. Microphone Echo: to get the effect and adjust the volume of each sound to optimize it. Magic Voice: click button to choose the voice effect. Key-Shifting: Make music suitable for your pitch. The range is -4b to +4#. Vocal Cancellation: Attempts to detect and cancel vocal as much as possible.

Technical Support

For Technical Support or Installation Hotline contacts please visit our web site at http://www.encore-usa.com

MN4029400000

Page10