Date: PSB #: Reference: Product(s): Subject:

Product Support Bulletin

Originator: 09/25/2002 MS Authorization: PSB.2002.09.004 Total Pages: N/A EPSON Stylus Pro 9000, 9500, 9600, 7000, 7500, 7600, 10000, 10600, 5000, 5500 and Stylus Color 3000 Printers
PostScript Printing Support for Mac OS X Native Mode
This bulletin provides instructions for installing and configuring a Mac OS X Client with your existing EPSON hardware or software RIP. If your EPSON Professional Wide Format printer was bundled with one of the RIP packages listed below, or if you had purchased the RIP as an option, then you can configure a Mac OS X Client with OS Version 10.2 and above for PostScript printing by simply installing the appropriate RIP PPD. EFI RS 5000 LX Series Stylus Pro 5000 printer EFI RS 5100 X2 Series - Stylus Pro 9000, 7000, 9500 and 7500 printers Fiery Spark Designer Stylus Pro 5500 printer Fiery Spark Professional 1.0 Stylus Pro 5500 and Stylus Pro 10000ARC/DYE printers Fiery Spark Professional 2.0 Stylus Pro 9600UCM/7600UCM printers EPSON StylusRIP - Stylus Color 3000 and Stylus Pro 5000 printers
Installation Instructions:
Setup your existing RIP Server as per the instructions provided in the Users Guide that came with your RIP. To setup a Mac OS X Version 10.2 Client follow the instructions below. There are two ways you can add a PPD and configure your printer in OS X, AppleTalk or IP Printing.

AppleTalk Installation:

1. Open the Print Center, which can be found on your hard disk driver under Applications - Utilities
2. Click on the Add button. Then select AppleTalk from the top sub-menu and your AppleTalk zone if applicable.
3. The Print Center should scan the network and find all your devices. Select your printer from the list and click on the Printer Model sub-menu. Select Other to continue.
4. Navigate to the location of your PPD file. After selecting the PPD file it should reflect the name of the printer under the Printer Model section. Click on the Add button.
5. Repeat the process to add your additional queues. Your Mac OS X Client should now be ready to print.
IP Printing Installation:
1. Open the Print Center, which can be found on your HDD under Applications Utilities
2. Click on the Add button and select IP Printing from the sub-menu.
3. Enter the IP Address of the Postscript Server under Printers Address. Uncheck the Use default queue on server and type in the queue you wish to add. Click on the Printer Model sub-menu and select Other.
5. The Print Center should now show the Queue that you typed along with the IP address.
6. Repeat the process to add your additional queues. Your Mac OS X Client should now be ready to print. Note: The StylusRIP does not have a separate folder on the CD to select the printers PPD. In order to select the PPD it must be copied from another clients Printer Description folder as shown below (HDD - System folder - Extensions folder - Printer Description folder).

PRODUCT SUPPORT BULLETIN

8/8/02 Originator: RR PSB.2002.01.001A Authorization: PSB.2002.01.001 Total Pages: 12 EPSON Stylus Color 3000, Stylus Pro 5000, 5500, 7000 Series, 7600 Series, 9000 Series, 9600 Series and 10000 Series Maximum Printable Area Limits for the EPSON Professional Graphic Printer line.
This bulletin was created to inform you of the maximum custom page sizes allowable for EPSON Professional Graphic products. The tables below show the maximum page sizes allowable for the EPSON Professional Graphics printer line (Desktop and Large Format). Although this document is meant as a guideline for the maximum page size allowable for each printer, it does not include printable area (margin) information. Please refer to your user guide for additional information regarding the printable area (margins) for your particular printer. There are 3 aspects that effect how long of a page your printer can output. Those 3 items are: 1. Operating System. 2. Driver Specification. 3. Software application(s) being used.
Maximum custom page size allowable per operating system (for Epson standard driver):
Stylus Color 3000 Stylus Pro in. 44 in. 44 in. Stylus Pro in. 44 in. 44 in. Stylus Pro 7000 90.5 in. 90.5 in. 590.5 in. Stylus Pro 7500 90.5 in. 90.5 in. 590.5 in. Stylus Pro 7600 90.5 in. 90.5 in. 590.5 in. Stylus Pro 9000 90.5 in. 90.5 in. 90.5 in. Stylus Pro 9500 90.5 in. 90.5 in. 590.5 in. Stylus Pro 9600 90.5 in. 90.5 in. 590.5 in. Stylus Pro 10000 Series 90.5 in. 90.5 in. 590.5 in.

Macintosh OS Win 9x/Me Win NT 4.0/2000/XP

44 in. 44 in. 44 in.

Print jobs being sent through the Epson standard print driver should be in the RGB format in order for color management to be utilized properly.
Maximum custom page size allowable for EPSON PostScript options (PPD):
Stylus Color in. N/A N/A N/A Stylus Pro in. 44 in. N/A N/A Stylus Pro 5500 N/A N/A 44 in. 44 in. Stylus Pro 7000 N/A See NOTE 1 N/A N/A Stylus Pro 7500 N/A See NOTE 1 N/A N/A Stylus Pro 7600 N/A N/A N/A See NOTE1 Stylus Pro 9000 N/A See NOTE 1 N/A N/A Stylus Pro 9500 N/A See NOTE 1 N/A N/A Stylus Pro 9600 N/A N/A N/A See NOTE1 Stylus Pro 10000 Series N/A N/A N/A See NOTE 1
EPSON Stylus RIP EPSON Fiery RIP Station EPSON Fiery Spark Designer (Mac) EPSON Fiery Spark Professional
Print jobs being sent through the Epson PostScript driver can be either RGB or CMYK format. Settings in the RIP will determine how color management is used.
Maximum page size allowable from software applications:
Stylus Color 3000 Stylus Pro 5000 See NOTE in. 48 in. 1,800 in. Stylus Pro 5500 See NOTE in. 48 in. 1,800 in. Stylus Pro 7000 See NOTE in. 48 in. 1,800 in. Stylus Pro 7500 See NOTE in. 48 in. 1,800 in. Stylus Pro 7600 See NOTE in. 48 in. 1,800 in. Stylus Pro 9000 See NOTE in. 48 in. 1,800 in. Stylus Pro 9500 See NOTE in. 48 in. 1,800 in. Stylus Pro 9600 See NOTE in. 48 in. 1,800 in. Stylus Pro 10000 Series See NOTE in. 48 in. 1,800 in.
Adobe Photoshop 5.x/6.x *Adobe Illustrator 8.x/9.x QuarkXPress 4.x *CorelDRAW 8.x/9.x
See NOTE in. 48 in. 1,800 in.
* - These applications allow for tiling of print pages, therefore allowing you to print beyond the printers maximum page length limit and print to the applications limits. The printer driver must be set for Roll Paper (Banner) mode so that page breaks at the printers maximum page length do not occur (in essence gives you a 0 margin for the bottom of the page). The Stylus Pro 5000/5500 however will give a slight page break at the 44 inch limit as these printers do not support banner mode. Also, printing certain elements from these applications may not utilize color management correctly/properly and may produce output color that is not expected.

NOTE 1:

a. Under Win 9x/Me, the PPD limit is 129 inches. b. Under Windows NT, 2000 and XP, the PPD limit is 1771.6 inches (SP7000/9000 Series) and 1800 inches (SP7600/9600/10000 Series). c. Under Mac OS 8.x/9.x, the PPD limit is 273.06 inches.

NOTE 2:

Adobe Photoshop has a pixel limitation of 30,000 pixels, which means that a document created @ 300ppi can only reach a maximum page size of 100 inches (H and V). When sending jobs to the printer via the standard nonPostScript print driver, Photoshop looks at the input resolution of the printer driver and adjusts the page size accordingly. All Epson large format printers use 360dpi as the input resolution (this is the resolution data is rasterized at), therefore when printing from Photoshop, the maximum page length you will be able to output to any Epson large format printer using the standard Epson print driver would be 83.33 inches (30,000 pixels / 360dpi). As for the Epson desktop products, they rasterize data at 720dpi, therefore the maximum page length obtainable with the standard print driver would be 41.67 inches (30,000 pixels / 720dpi). Also, under Photoshop 5.x/6.x for the Macintosh and Photoshop 6.x for the PC, the job will end up clipped if it is over the 83.3inch printer page limit. If you are using Photoshop 5.x for the PC, the print job will actually be truncated to fit within the printable area of the printer. Be advised that you may not get a page size error. It may be useful to enable the print preview function of your printer driver (if available) so that you do not waste unnecessary media. The only options for printing beyond the limitations is to save the file and print via an application that does not have the 30,000 pixel limit (may lose color management functions) or print the file through a PostScript RIP (which will allow for longer pages). The following examples show how to setup banner printing from Adobe Illustrator 8.01 and CorelDRAW 9 from the PC platform. The Macintosh versions of these applications should be very similar in function. Please refer to your software documentation for additional assistance.

Adobe Illustrator 8.01:

In this example, we are creating a banner, which is 227 inches (Illustrators max. page setup). 1. Launch Illustrator and open or place your file in the page layout. 2. Click on File, then Document Setup. The following screen appears.
3. Uncheck Use Print Setup, enable Tile Full Pages and create the page size (in our example we used 44x227 inches). 4. Click, Print Setup. This will bring up the print driver.

5. Click on the Paper Tab. The following appears.
6. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
7. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media.
8. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document setup. The page should now show the following.
9. At this point you can and resize the image to fit within the printable area and print.

CorelDRAW 9:

In this example, a banner is created at 227 inches. 1. Launch CorelDRAW and open or place an image in your page layout. 2. Adjust the page size and image for the document as shown in the following image.
3. Click on File and Print Setup.
4. Click on the Paper Tab. The following appears.
5. Set the Paper Source to Roll Paper (Banner) and also enable Save Roll Paper.
6. When creating the custom page size, divide the banner size by a value that will make it less than the printer maximum custom page size (not necessary for OS/Drivers that support 590.5 inches, unless the document is beyond that size). In this example we take (227/3 = 75.7), therefore the custom page size created would be 44x75.7 inches. The reason for this is to save media.
7. After setting the custom page size and other driver settings (media type, resolution, etc.), click OK. This will bring you back to the document.
8. At this point, click File then Print. CorelDRAW will then run a pre-flight check and will show the following window.
9. Click on the Layout Tab and enable Print Tiled Pages and set any additional parameters as you see fit.
10. At this point you could check other tab settings (if necessary) and click Print Preview (recommended) if you want to see how the file will be printed or Print to output the file to your printer. For all other applications, please refer to your software documentation for information on maximum custom page sizes for documents, banners or tiling prints.

Date: 11/21/2001 PSB No.: PSB.2001.11.002 Reference: N/A Originator: RD/RR Authorization: Affected Product(s): Epson Stylus Pro 5000/5500/7000/7500/9000/9500/10000/10000CF Subject: Windows XP Driver & Status Monitor 3 Installation Procedure
This bulletin describes Windows XP printer driver/Epson Status Monitor 3 installation procedures for the following Epson printer models. Model Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 9000 Stylus Pro 9500 Stylus Pro 10000 Stylus Pro 10000CF Status Monitor 3 N/A Not available Yes Yes N/A Yes Not available Not available USB N/A Yes Yes Yes N/A N/A Yes Yes IEEE 1394 Yes (optional) Yes (optional) Yes (optional) Yes (optional) Yes (optional) Yes (optional) Yes Yes Ethernet (optional) Yes Yes Yes Yes Yes Yes Yes Yes Parallel Yes Yes Yes Yes Yes Yes Yes Yes
The appropriate Windows XP driver/Status Monitor 3 can be downloaded from Epson Americas support website, at http://support.epson.com/filelibrary.html. During the download process, choose Save this program to disk option to save the files to your local hard disk drive. When you are ready to install your printer driver/ Status Monitor 3, Power OFF you printer and restart you computer. Run the self-extracting executable file from the saved location on your hard disk drive and follow the installation instruction on the screen for your specific connection type.
Note: The screen shots shown in this bulletin reflect the Stylus Pro 9500 printer, but the installation instruction are identical for all of the printer models listed above.
Instructions for USB and Parallel Connection 1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar
followed by the Windows Logo verification screen. Click on Continue Anyway option to continue.
As instructed at following EPSON Printer Utility Setup screen Power ON your printer. Your printer will be detected automatically. Select Install the software automatically (Recommended) option then click NEXT to continue at the Found New Hardware Wizard screen.
3. Your will be prompted with Windows Logo verification screen again, Click on Continue Anyway option to proceed to the
next step. After the driver files have been copied to you local hard disk drive, click on Finish to compete the driver installation.
To install Epson Status Monitor 3 follow the instructions under section heading Installation Procedure for Epson Status Monitor 3.
Instructions for IEEE 1394 Connection
1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue.
As instructed at the following EPSON Printer Utility Setup screen Power ON your printer. The IEEE 1394 card will be detected automatically. At the Found New Hardware Wizard screen click on Install from a list or specific location (Advanced) option then click on Next to start the installation of the IEEE 1394 device driver.

On the screen shown below, uncheck Search removable media, click on Browse and navigate to the location of the extracted driver files (usually under C:\Epson\) and point to the WIN2000 folder. Select the folder then click on Next to continue and finish the IEEE 1394 driver installation.
5. The following Found New Hardware Wizard screen for IEEE 1394 status will be displayed. Select Install the software
automatically (Recommended) option selected and click on Next to continue. After the driver files have been copied to you local hard disk drive, click on Finish to complete the driver installation.
After the IEEE 1394 driver installation is completed on the following Found New Hardware Wizard screen select, Install the software automatically (Recommended) option then click on Next to start the printer driver installation. Next, you will see the progress bar followed by the Windows Logo verification screen. Click on Continue Anyway option to continue.
7. After the driver files have been copied to you local hard disk drive, click on Finish to compete the driver installation.
Instructions for Ethernet Connection 1. At the EPSON Printer Utility Setup screen highlight your printer then click OK. Next, you will see the progress bar
At this point DO NOT POWER On your printer and at the EPSON Printer Utility Setup screen click on Stop searching button to continue with the installation. Next, you will see the progress bar followed by the Windows Logo verification screen. Select Continue Anyway option.
On the next screen your will be notified that the printer has been set to LPT1, click on OK to finish the driver installation.
Power ON your printer next, then you will need to redirect the port to the Type B Ethernet cards IP address. Click on the Start button, then Control Panel followed by Printers and Other Hardware then go to Printers and Faxes. Right click on the printer icon and choose Properties from the pop-up menu.
At the printer properties screen, click on Ports and then on the Add Port button. On the Printer Ports screen, highlight Standard TCP/IP Port and click on New Port.
At the Add Standard TCP/IP Printer Port Wizard, screen click on Next. Then on the next screen type the Type B Ethernet cards IP address. Check with your System Administrator for the correct IP address assigned to the Epson Type B Ethernet card on your network.
7. If Windows identifies the Epson card automatically, click Finish at the Completing the Add Standard TCP/IP Printer
Port Wizard. If your card is not identifies as an Epson network card automatically, click on Custom and then Settings. On the next screen select LPR, type PASSTHRU as the Queue Name, check SNMP Status Enabled and click OK. Click Next on the Add Standard TCP/IP Printer Port Wizard screen to continue with the installation, and then click Finish on the next screen. Click Close at the Printer Ports screen.

8. On the next screen click on Apply and then on Close to finish the installation. Your printer driver installation has been
completed and the printer is ready to print.
Installation procedure for Epson Status Monitor 3 1. At the EPSON Status Monitor 3 setup screen highlight your printer then click OK. Next, you will see the progress bar
followed by a window indicating that EPSON Status Monitor 3 is complete.
EPSON PRODUCT SUPPORT BULLETIN
Date: 09/06/2001 PSB No.: PSB.2001.09.002 Reference: N/A Originator: RR Authorization: Affected Product(s): Stylus Pro 7000 Series, 9000 Series and 10000 Series Large Format Printers Subject: Printer Connectivity Issue due to Incorrect Model Name Selection Printer Reports Off-Line

Issue Description:

1. MAC Connection: When connecting a Stylus Pro 7000 Series, 9000 Series or 10000 Series to an Apple Macintosh via USB, Ethernet or FireWire, the Macintoshs System Profiler sees the connection, but when going into the Chooser the connection does not show up when the appropriate printer driver is selected.
PC Connection: When connecting a Stylus Pro 7000 Series, 9000 Series or 10000 Series to a Windows PC via USB, Ethernet or FireWire and while attempting to print, an error message (Printer Off-Line or Communication Error on PC side) or ("Command Error" or "0002000B" on the LCD display of the printer) occurs.

Solution:

After verifying that all connections and port settings are good (on System and Printer) and that the printer is on-line, check that the model name of the printer is set correctly. To do this, follow these steps: 1. 2. 3. Shut printer off. Open the front cover. While holding down the [SelecType] + [Paper Feed +] buttons, power the unit on. The LCD display will then show the printer model name (it will show US and International model names). The following are the names that will show for each model type. The model name should match the driver selection.
SP7000 Series Names: Stylus Pro 7000 (US name) Stylus Pro 7500 (US name) PM-7000 (International name) MC-7000 (International name)
SP9000 Series Names: Stylus Pro 9000 (US name) Stylus Pro 9500 (US name) PM-9000 (International name) MC-9000 (International name)
SP10000 Series Names: Stylus Pro 10000 (US name) Stylus Pro 10000CF (US name) PM-10000 (International name) MC-10000 (International name)

4. 5. 6.

If the incorrect model name selection appears, shut the unit off and repeat step 3 until the correct model name shows. Once the proper name shows up, power the unit off, wait 15 seconds, close the front cover and power the unit back on. Once the printer is in a ready state, make the appropriate driver selection on your computer system. At this point the printer connection should work.

Date: PSB #: Reference: Product(s): Subject: 05/29/01 Originator: PSB.2001.08.006 Authorization: TE00-117 Rev.C Total Pages: Stylus Pro 9000 / 7000, Stylus COLOR 900, Expression 1640XL / 836XL / 1600, Stylus RIP Incompatibility with FireWire 2.1 File and OS 9.0.1 or Later LHD/DA 2
This bulletin was created to inform you of an incompatibility with the FireWire 2.1 extensions and Mac OS 9.0.1 or later. Problem: ! When the FireWire extensions (FireWire Enabler ver. 2.1 and FireWire Support ver. 2.1) are installed in a PowerPC based Mac (PCI-Bus model) without built in FireWire support running OS 9.0.1 or later, the following system error occurs after restarting the system: Sorry, a system error occurred. Illegal instruction To temporarily turn off extensions, restart and hold down the shift key
Effected Products: Ink-Jet Printers: Model Name Stylus Pro 9000 Stylus Pro 7000 Stylus Color 900 Epson Stylus Driver Updater *1 Scanner: Model Name Expression 1640XL Expression 836XL Expression 1600 Stylus RIP: Model Name Stylus RIP Action Required: Driver Version Vol. 1.4

Page 1 of 2

Driver Version Rev. 6.3aE Rev. 6.3aE Rev. 6.3aE Rev. 1.0aE / 1.1aE
Driver Version Rev. 1.7aE Rev. 1.7aE Rev. 1.7aE
Please follow the procedure below in order to delete the FireWire files from the system: 1. Insert the Mac OS bootable CD in your CD ROM drive 2. Reboot the system while holding down the C key on the Keyboard 3. After the system is rebooted trash the FireWire Enabler and the FireWire Support files from the Extensions Folder 4. Restart the system normally NOTE: The FireWire CD will contain the updated version of the extensions listed above by the end of July 2000.

Page 2 of 2

Date: 7/26/2001 PSB No.: PSB.2001.08.003 Reference: TE01-045 Rev. A Originator: JD, RR, TC & MS Authorization: Affected Product(s): EPSON Pro Graphic Printers Subject: Compatibility Chart for Macintosh OS X Classic This bulletin provides information on compatibility for EPSONs Pro Graphic printers running in Macintosh OS X Classic mode. Mac OS X provides the Classic environment mode for Mac OS 9 compatible applications and device drivers. Classic mode will require Mac OS 9.1 system software. To setup Classic mode follow the steps below: 1. First install or upgrade your Macintosh system to OS 9.1 before installing OS X (for details refer to Apples OS X documentation). 2. To start in Classic mode, click the Classic icon in System Preferences. To find System Preferences go to the Apple Menu or click on the icon in the Dock bar on the desktop. Classic mode can also be set up to start automatically during the log in process. (Refer to your Apple documentation for installation and operation of Macintosh OS X Classic and 9.1). 3. To run a Classic application, just doubleclick on it or a document created with the application. A) The following Epson models are supported in OS X Classic mode when using the connector type(s) described in the chart below.

Model Stylus Color 3000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 9000 Stylus Pro 9500 Stylus Pro 10000/10000CF Driver Version 5.69E 5.69E 6.61E 6.63E 6.73E 6.30E 6.73E 6.63E Connector Type Ethernet I/F Ethernet I/F USB/Ethernet I/F USB/Ethernet I/F USB/Ethernet I/F Ethernet I/F Ethernet I/F USB/Ethernet I/F
1. MAC OS X Classic mode supports USB-native and network-capable devices. Classic mode does not support MAC Serial, SCSI or FireWire connected devices. 2. Printers using a Fiery Rip Station for PostScript printing are not yet supported at this time. 3. Printers using Stylus Rip with Adobe PostScript drivers are not yet supported at this time.
B) The following models are not supported in OS X Classic when using the connector type(s) described in the chart below. Model Stylus Color 3000 Stylus Pro 5000 Stylus Pro 5500 Stylus Pro 7000 Stylus Pro 7500 Stylus Pro 9000 Stylus Pro 9500 Stylus Pro 10000/10000CF Connector Type Serial/Parallel-to-USB adapter/FireWire (IEEE 1394) Serial/ Parallel-to-USB adapter/FireWire (IEEE 1394) FireWire (IEEE 1394) FireWire (IEEE-1394) FireWire (IEEE-1394) Serial/Parallel-to-USB adapter/FireWire (IEEE 1394) Serial/Parallel-to-USB adapter/FireWire (IEEE 1394) FireWire (IEEE-1394)
Date: 6/26/01 PSB No.: PSB 2001.06.004 Reference: N/A Originator: TC/RR Authorization: Affected Product(s): SC3000, SP5000, SP5500, SP7000, SP7500, SP9000, SP9500, SP10000 DYE, and SP10000 ARC Subject: Current Driver Location for C823722 EPSON IEEE 1394 (FireWire) Type B Interface Card for Windows 2000/Me/Macintosh Operating Systems
This bulletin provides information on where to find the most current driver for the EPSON C823722 - IEEE 1394 (FireWire) Type B Interface Card for the following EPSON Professional Graphics Inkjet Printers with appropriate Operating Systems: SC3000, SP5000, SP5500, SP7000, SP7500, SP9000, SP9500, SP10000DYE, and SP10000ARC. 1. 2. Windows Requirements: The EPSON C823722 - IEEE 1394 (FireWire) Type B Interface Card only supports factory preinstalled full versions of Windows 2000 and Windows Me Operating Systems Macintosh Requirements: The IEEE 1394 (FireWire) drivers for the Apple Macintosh Operating System (OS 8.6 with FireWire Update 2.1 or later required) are all ready built into the EPSON printer driver, and require no other driver files.
The driver CD that comes in the box with the EPSON C823722 - IEEE 1394 (FireWire) Type B Interface Card may contain older drivers than what is available on the CD that came with your EPSON Printer or from EPSON Internet Support Web Site. Prior to installing your printer, please refer to the IEEE 1394 Reference Table below for the location of the latest drivers for your specific EPSON printer and operating system. If the driver your need is listed as Update on the Web the most current driver can be found on the EPSON Internet Support Web Site at: http://support.epson.com/filelibrary.html IEEE 1394 Reference Table:

Printer Models:

EPSON Stylus COLOR 3000 EPSON Stylus PRO 5000 EPSON Stylus PRO 5500 EPSON Stylus PRO 7000
Windows 2000 Update on the Web Update on the Web Driver that came with printer Update on the Web
Windows Me Update on the Web Update on the Web Driver that came with printer Driver on CD-ROM that came with C823722 card Driver on CD-ROM that came with C823722 card Driver on CD-ROM that came with C823722 card Driver on CD-ROM that came with C823722 card Driver that came with printer Driver that came with printer

EPSON Stylus PRO 7500

Update on the Web

EPSON Stylus PRO 9000

EPSON Stylus PRO 9500
EPSON Stylus PRO 10000 EPSON Stylus PRO 10000CF
Driver that came with printer Driver that came with printer

4.2 4.2 5.1.5 4.2 5.1.5

1.0 1.0.2

1.1 1.1 1.1 4.2

5.1.5 1.1

3.0 4.0

4.2 4.2 4.2

4.0 4.2

4.2 4.2 5.1.5 4.2 4.2 4.2 5.1.5 4.2 4.2 4.2 5.1.5 4.2 4.2 4.2
5.1 5.1 5.1.3 4.0 4.0 4.2 4.2
5.1 5.1 5.1.3 4.2 4.2 4.2 4.2 5.1 5.1 5.1.3 4.2 4.2 4.2

EFI GA Solutions

26.11.2007
HP HP HP HP HP HP HP HP Roland Roland Roland Roland Roland Roland Roland Roland Roland Roland
DesignJet 5000 DesignJet 5500 DesignJet 5500 DesignJet Z6100/6100ps DesignJet Z6100/6100ps DesignJet 500 42" DesignJet 800 42" HP DesignJet 4000/4000ps CammJet CJ 540 HI-FI Jet FJ 400 HI-FI Jet FJ 500 HI-FI Jet FJ 600 HI-FI Jet FJ 540 SolJet Pro II SC-540 SolJet Pro II SJ-540 SolJet Pro II SJ-740 SolJet SJ 500 SolJet SJ 600
60'' 42'' 60'' 42'' 60'' 42'' 42'' 42'' 54'' 44'' 54'' 60'' 54'' 54'' 54'' 74'' 53.5'' 63''
Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win Mac/Win
4.2 4.2 4.2 5.1.3 5.1.3 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2 4.2