The School Board of Miami-Dade County, Florida
Benchmark Information T-MOBIL
ITEM DESCRIPTION OF ITEM Items 1 through 11 will be awarded on a total low bid basis, as per attached specifications. QTY
Bid # 206-XX04 Telephone Service, Wireless and Integrated Two-Way Radio/Wireless Telephone
UNIT T-MOBIL (Formerly Omnipoint, Voicestream)

M-DCPS ORIGINAL PRICES

STATE OF FLORIDA M-DCPS NEW PRICESBased on pool of minutes, PRICES-$29.99 per each 400 minutes per phone, phone up to 400 minutes (no average cost per phone is pool of minutes). Additional charge is $.10 per minute per $25 per month phone over the 400 minutes
Local service charge (500 phones X 12 months) Peak airtime charge Off-peak airtime charge Basic wireless telephone 1,2 Additional standard battery for item 4 Premium wireless telephone
6,000 1,800,76,364 38,182
Cost per month Minutes Minutes Each Each Each Each Roaming days Roaming days Minutes Minutes
$15.00 $0.12 $0.12 $0.00 $18.00 $89.00 $24.00 $0.00 $0.00 $0.00 $0.49
$90,000.00 $216,000.00 $0.00 $0.00 Ericsson CH668 $1,134.00 Ericsson CH668 $5,696.00 Ericsson CF 768 $168.00 Ericsson CF 768 $0.00 $0.00 $0.00 $18,709.18 includes air
$15.00 $0.04 $0.04 $0.00 $15.00 $60.00 $24.00 $0.00 $0.00 $0.00 $0.45
$90,000.00 $72,000.00 $0.00 $0.00 $945.00 $3,840.00 $168.00 $0.00 $0.00 $0.00 $17,181.90
$29.99 $0.00 $0.00 $0.00 $15.00 $60.00 $25.00 $0.00 $0.00 $0.00 $0.45
$179,940.00 $0.00 $0.00 $0.00 $945.00 $3,840.00 $175.00 $0.00 $0.00 $0.00 $17,181.90
Additional standard battery for item 6 Intrastate roaming charge Interstate roaming charge Intrastate long distance charge Interstate long distance charge
TOTAL LOW: ITEMS 1 THROUGH 11 Items 12 through 15 are for information only and will not be considered in the total amount for items 1 through 11. Unlimited weekend service Unlimited night and weekend service Hands - free vehicle kit (installed) for item 4 Hands - free vehicle kit (installed) for item 6 1,527 1,14 Cost per month Cost per month Each Each $5.00 $0.00 $218.00 $224.00

$331,707.18

$184,134.90

$202,081.90

$7,635.00 $0.00 $13,734.00 $3,136.00
$0.00 $0.00 $40.00 $40.00
$0.00 $0.00 $2,520.00 $560.00

CF768 User Manual

6/99 - PBM
This manual is published by Ericsson Inc., without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Inc., at anytime and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. Ericsson Inc., 1998. Publication Number: AE/LZT R3 Printed in the U.S.A.

ric ss on

CF768 Menu Structure
Indicates the Reduced Menu. For more information on menus, see chapter Navigating the Menu System.
Some menus/features are operator dependent.
Store Read Mm Voice Mail Menu Size RecallName Start Here:

Set Alarm

Missed Call

Line 2?

clock displayed EditPh.Bk
lists missed calls Ring Vol
Settings Ear Volume Ring Type Edit Melody Set Clock Language Answ Mode MasterReset CardLock PhoneLock CallCards Networks lists networks Customize EditMenus? Reset? Barring Outgoing Incoming CancelAll? Fwd Data Activate? Cancel? GetStatus? Fwd Fax Greetings Call Wait Call Info Data Menus Key Lock Key Sound

Forward? SpeechFax

Next Call

Area Mm

Speech? Speech>Fax Fax>Speech Fax? Data?

Send Mm

Area Info Fwd L1 Fwd L2 All Calls Unanswered All Calls Unanswered

New Options

Tot Out Last
Activate? Cancel? GetStatus?

Table of Contents

Guidelines for Safe and Efficient Use. i
([SRVXUH WR 5DGLR )UHTXHQF\ (QHUJ\ L (IILFLHQW 3KRQH 2SHUDWLRQ L (OHFWURQLF 'HYLFHV LL +HDULQJ $LGV LLL 9HKLFOHV LLL 3RVWHG )DFLOLWLHV LLL $LUFUDIW LLL &KLOGUHQ LY %ODVWLQJ $UHDV LY 3RWHQWLDOO\ ([SORVLYH $WPRVSKHUHV LY )RU 9HKLFOHV (TXLSSHG ZLWK DQ $LU %DJ LY 3URGXFW &DUH LY %DWWHU\ ,QIRUPDWLRQ Y

7KH ,QGLFDWRU /LJKW

Making and Receiving Calls. 9
0DNLQJ DQG 5HFHLYLQJ &DOOV $ERXW &DOOLQJ /LQH ,GHQWLILFDWLRQ &/, &DOOLQJ 9RLFH 0DLO &RQIHUHQFH &DOOLQJ 7UDQVIHUULQJ &DOOV
Useful Information While Talking. 14 Navigating the Menu System. 15
$ERXW WKH 0HQX 6\VWHP 0RYLQJ 7KURXJK WKH 0HQXV

Assembly Instructions. 1

3UHSDULQJ <RXU 3KRQH 6L[ 6WHSV
Creating Your Own Phone Book. 18

$ERXW WKH 3KRQH %RRN

What the Phones Display Tells You. 5
7KH 'LVSOD\ /HDUQLQJ DERXW <RXU 3KRQH 'LVSOD\ 0HVVDJHV 6SHFLDO &KDUDFWHUV
Personalizing Your Phone. 22
&KDQJLQJ WKH 5LQJ 9ROXPH &KDQJLQJ (DU 9ROXPH &KDQJLQJ WKH 5LQJ 7\SH
&KDQJLQJ WKH.H\ 6RXQG 9LHZLQJ WKH &ORFN 8VLQJ WKH $ODUP $ERXW 'LVSOD\ /DQJXDJH $ERXW $QVZHULQJ 0RGHV ZLWK +DQGVIUHH $ERXW WKH *UHHWLQJ $ERXW &DOO :DLWLQJ $ERXW &DOOLQJ ,QIRUPDWLRQ
Receiving Area Information. 34
$ERXW $UHD ,QIRUPDWLRQ $FWLYDWLQJ WKH $UHD ,QIRUPDWLRQ
Knowing the Price and Duration of Your Calls. 36
$ERXW &RVW DQG 'XUDWLRQ RI &DOOV

Forwarding Calls. 26

$ERXW )RUZDUGLQJ &DOOV )RUZDUGLQJ IURP 5HGXFHG 0HQX )RUZDUGLQJ IURP ([WHQGHG 0HQX 9LHZLQJ 6WDWXV RI &DOO )RUZDUG &DQFHOLQJ &DOO )RUZDUG

Specific Data Menus. 38

$ERXW +DYLQJ 'DWD 0HQXV 2Q

Other Networks. 40

$ERXW &KRRVLQJ D 1HWZRUN
Making Your Personal Ring Signal. 42

0XVLFDO.H\SDG

Protecting Your Keypad, Phone, and SIM Card. 28
3URWHFWLQJ <RXU.H\SDG 3KRQH DQG 6,0 &DUG
Other Things You Should Know. 44
3UREOHPV <RX &DQ 6ROYH
Barring (Restricting) Calls. 31 Sending and Receiving Text Messages. 32
$ERXW 7H[W 0HVVDJHV &KHFNLQJ <RXU 6XEVFULSWLRQ
Guidelines for Safe and Efficient Use
Since its introduction in the mid 1980s the mobile phone is one of the most exciting and innovative products ever developed. Your phone can help you to stay in touch with your office, your home, emergency services and others.
The design of your phone complies with the FCC guidelines (and those standards). * American National Standards Institute: National Council on Radiation Protection and Measurements; International Commission on Non-Ionizing Radiation Protection.

Driving

Check the laws and regulations on the use of wireless telephones in the areas where you drive. Always obey them. Also, if using your phone while driving, please: Get to know your wireless phone and its features such as speed dial and redial. When available, use a handsfree device. Position your wireless phone within easy reach. Suspend conversations during hazardous driving conditions or situations. ii

Electronic Devices

Most modern electronic equipment, for example equipment in hospitals and cars, is shielded from RF energy. However, certain electronic equipment may not be shielded against RF signals from your wireless phone.
Pull off the road and park before making or answering a call if driving conditions so require.

Pacemakers

The Health Industry Manufacturers Association recommends that a minimum separation of six (6) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pace-
. do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
maker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.

Persons with pacemakers:

Should ALWAYS keep the phone more than six inches from their pacemaker when the phone is turned ON. Should not carry the phone in a breast pocket. Should use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, turn your phone OFF immediately.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider (or call the customer service line to discuss alternatives).

Do not allow the battery to be placed into the mouth. Battery electrolytes may be toxic if swallowed.
Connect AC (power supply) only to designated power sources as marked on the product.
To reduce risk of damage, remove the electrical cord from the outlet by pulling the AC adapter rather than the cord.
Make sure the electric cord is located so that it will not be stepped on, tripped over, or otherwise subjected to damage or stress.
To reduce risk of electric shock, unplug the unit from the power source before attempting any cleaning. Once unplugged, use a soft cloth lightly dampened with water for cleaning.
DANGER - Never alter the AC cord or plug. If the plub will not fit into the outlet, have a power outlet installed by a qualified electrician. Improper connection can result in risk of electric shock.

Assembly Instructions

This chapter describes how you assemble the phone, what the Subscriber Identity Module (SIM) Card is, and how you handle the battery.
Step 1: Inserting the SIM Card
Note! Place the gold side down, clipped corner to left

About the SIM Card

Contact your service provider if your phone is not equipped with a SIM card. The SIM Card is a computer circuit that keeps track of your phone number, the services that you have ordered from the service provider, and your phone book information.
Your SIM Card is supplied with a PIN (Personal Identification Number) that you may need to enter into the phone to gain access to the phone and network. Follow the six steps below to assemble your CF768.

Removing the SIM Card

Preparing Your Phone Six Steps
1 Insert the SIM Card (if not previously inserted). 2 Connect the battery to the phone. 3 Attach the belt clip to the phone (optional). 4 Connect the charger to the phone charger connector. 5 Connect the charger to a standard electrical outlet. 6 Turn the phone ON.
Step 2: Attaching the Battery

About the Battery

Your phone is supplied with a Nickel Metal Hydride (NiMH) battery. The battery is not charged before shipment, but there might be enough power to turn the phone on.

Conditioning the Battery

Step 3: Attaching the Belt Clip

(optional) Note!

The battery needs to be recharged and fully discharged 2-3 times to reach full capacity. To fully discharge the battery, operate the phone as usual until the low battery warning is issued. You hear a low beep and the light on top of the phone flashes red.

The icons visible in the display are defined below. Not all icons will be visible at all times.
You have received a short text message or area information.
You are currently on a call.
Current battery strength - more bars indicate more strength.

1ETWORK

The name of the network currently being used. The received signal strength in five steps- more bars indicate more strength. Indicates which line is activated. These icons only show if you have two lines on your SIM card.

The Alarm Clock is set.

You have received a voice mail message.
Learning about Your Phone
Antenna Indicator Light Speaker Side Volume Keys Display ON/OFF Key Keypad Flip Microphone Channel Belt clip mounting area SIM release Battery Accessory Connector Battery Release

Display Messages

Text messages that may appear in the display are explained in the table below.

Message

Meaning This indicates that no network is in range. You are not covered by a network or the received signal is too weak. You should move to obtain a sufficiently strong signal. Do you want to check your voice mail messages? Do you want to read your SMS messages? A conference call feature that indicates that a held and active call connected. You are no longer part of the call. Time spent on previous call. Will return to standby mode after 5 seconds. Call 1 is on hold. Call 2 is on hold.

IyIiyu

8rigu4
8evvUexp Ge) yxCyvh !yxCyvh

Iy6ggi

Some menus/features are operator dependent. Meaning Message Meaning The PIN has been entered incorrectly. This message is followed by the prompt @xi
A network is in range, but you are not allowed to use it. You may, however, call the emergency number 911, if it is available. A network is in range, but you are not allowed to use this network. You may, however, call the emergency number 911, if it is available.
XyxqQDI 8H9@y Iy6esv QryxiGygu

Tiegrsxq

The phone is looking for a network, but you may call the emergency number 911, if it is available. The SIM card is permanently disabled after the unblocking code has been entered incorrectly ten times. Contact your service provider. This message appears if the PIN has been entered incorrectly three times in succession. Press YES, and enter Personal Unlocking Key (PUK) to unlock phone. No SIM card is inserted in the phone or the inserted SIM is not accepted.
You have tried to activate a feature that is not supported by your network. The feature or service is not available. Followed byGygu8yhi. To unlock, enter your security code and press # or YES. Command Reject. The command you gave was rejected. The cause of the error was a system failure. You have inserted the wrong SIM card. Your phone is processing. Please wait.

8whSitig IiQyfv Xyxq8eh

Vxfvygu4

QvieiXes Qh@y

Password Error. The password you sent was wrong. Enter your 4-to-8 digit PIN code and press YES.

Dxi8eh

8ehGyguQDI)

Special Characters

Press and hold down the appropriate key to access the special characters. */P is used for inserting pauses in numerical sequences and when making your own ring signal melodies. 0/+ is used for international calling. #/ is used for storing numbers into the phones memory.
Light Green - steady Red - blinking
Indicates The battery is charging and the phone is ON. Your battery power is low. The phone is OFF and the battery is charging. The phone is OFF, or the phone is ON, but no signal is available.

Red - steady

No light

The Indicator Light

The status indicator light at the top of the phone tells you the current state of the phone. There are six states.
Light Green - slow blink Green - fast blink
Indicates The phone is ready to make and receive calls. There is an incoming call.
Making and Receiving Calls
This chapter describes how to make and receive calls, how to make emergency calls, how to show or hide your phone number when calling CLI (Calling Line Identification), and how to handle two calls simultaneously.
8yxxigsxq will be displayed briefly. Once the call is connected, the call counter (shown in minutes and seconds), and the phone icon will appear in the display.

Holding the Phone

With the flip open, put the earpiece to your ear for optimum speech and reception quality. Fully extend your antenna.

Making a Call

1 Turn the telephone ON (press NO until the display comes on).
2 If the phone is equipped with a retractable antenna, fully extend the antenna.

Ending a Call

3 Use the keypad to enter the number you wish to dial. As you press the number keys, the numbers appear in the display. Note! If the number is longer than 10 digits, additional digits to scroll through will be appear as an arrow. Use the number. To erase a digit, press CLR. To erase an entire phone number, press and hold CLR, or press NO. 4 Press YES. The word 8evvsxq will briefly appear in the display while you are connecting the call.
Press NO to end the call.

Making an Emergency Call

Enter the second phone number and press YES. The first call is put on hold and PxCyvh appears in the display.
Receiving a Second Call While a Call Is in Progress
When you receive a second call, you will hear a tone in the earpiece and the display shows 8evvXes. 1 Press YES to answer the second call. The current call is put on hold. The display now shows: PxCyvh 3 Ignore the call.

Receiving a Third Call

If you are engaged in one call and have a second one on hold, you may receive a third call. You will hear a tone in the ear piece, and 8evvXes is shown in the display. You can only have one call on hold at a time, so you need to end the first or second call before you answer the call. You can do one of the following:
2 To reject the second call, press 0 (zero) followed by YES.
Switching between Two Calls
Press YES to switch between the two calls.
Press 0 (zero) followed by YES to reject the third call.
End the first call, retrieve the held call, and answer the incoming call.
Ending the Current Call and Returning to the Held Call 1 Press NO to end the current call. The display shows Sisii4 and you hear two beeps.
2 Press YES within three seconds to return to the held call. Note! If you do not press YES within three seconds, the held call is automatically ended.
Making a Calling Card Call
End both calls. The phone rings and the question 6xi4appears in the display. Press YES to answer the call.

Ignore the third call.

Before making a calling card call, you must first enter your calling card access number and your verification number. For more information, refer to CallCards. Steps 2 and 3 may be reversed depending on your calling card service. 1 Dial the number you wish to call.

appear.

2 Press and hold down YES for three seconds.
To Initiate a Conference Call
1 Call the first person you wish to talk to in the conference call. 2 Place the person on hold by pressing YES. 3 Call the second person. 4 Press 3, followed by YES to join the two people to the conversation. Note! You can put the conference group on hold and then add a third member by repeating steps 3 and 4. You can add up to five members using the same method.
8eh8evv will appear Tixh8evvihIy4 will
3 Wait for prompt (tone or voice) to enter the number. 4 Press YES. TixhWiIy4 will appear. After the prompt, press YES to send verification number. Your call is now connected.

Checking Time or Cost of Calls
When you start a call (incoming or outgoing), the airtime is counted in minutes and seconds and shown on the display, like this: )"# If you want the phone to keep track of the cost, you need to set that specifically. Also check if your service 14
Navigating the Menu System
This chapter describes how you navigate through the menu system to get maximum use of your phone, and how you can customize your reduced menu structure by adding or deleting different menus and submenus. Availability of some menu functions is dependent on your subscription. Some menus may be hidden if you do not subscribe to the feature.
Enter: Key in letters or numbers from the keypad. Reduced Menu: The reduced menu consists of those functions and settings used most frequently. Customized Menu: The reduced menu system can be customized by adding or deleting other menus or submenus. Extended Menu: The extended menu contains all functions and settings available from the phone.
See the menu structure diagram on the inside front cover of this Users Guide.

About the Menu System

You use a menu system to control the functions of your phone. There are two sizes of the menu system: 1 The reduced 2 The extended Note! Each time the phone is powered ON it activates the menu you last used.

Moving Through the Menus

Use these keys to scroll through the menu system and to access the different menus. When you reach the desired menu, press YES to choose the menu.

Glossary

These terms will be used throughout this manual. Scroll: Press
or to move between the menus.
Select: Scroll to a menu and then press YES.
Confirm a setting or a selection Reject a setting or a function Return to the standby display
2 Press menu. Press this: Note!
several times until you reach the Menu Size
3 Press YES. You are now in the Menu Size menu where you can switch to the Extended menu mode. 4 Press YES at the @ixh4 or Sihgi4 prompt.

NO CLR

Scroll to the right in the menu system Scroll to the left in the menu system

er ci

Customizing Your Reduced Menu

About Customizing Menus

The Reduced Menus
The reduced menu system can be customized by adding or deleting other menus or submenus.
The reduced menu consists of those functions and settings used most frequently. This menu system can be personalized to fit your specific needs. When you personalize the system, menus and sub-menus are moved from the extended menu system to the reduced menu system.

When you are scrolling through the menus in customize mode, the menu names will be either blinking or stable, meaning that you may either add or delete (respectively) the menu from the reduced system.

Adding Menus

1 Select the Customize menu. 2 Select the Edit Menus submenu. 3 Scroll to, and select, the menu or submenu that you want to add (a menu where the name and icons are blinking). 4 Press and hold YES for three seconds. 5 6ggiQy4 appears. Press YES to accept the position (if you wish to change the position, see Changing Menu Position below). 6 Repeat steps 3 and 4 to add more menus.

The Extended Menus

The extended menu contains all functions and settings available from the phone.

Selecting the Menu Size

1 Press CLR to clear the display.
Some menus/features are operator dependent. The reduced menu structure is reset to its original positions.
7 Press NO to end session.

8 Press YES to update.

Changing Menu Position Press NO when the $CCEPT3OS" prompt appears. The display could now show: 6TORE!"
This display above advises that the menu you want to add will be in the fourth (04) position to the right (>) in the reduced menu system. Use the keypad to change the position number if the current position is not suitable.
Resetting All Functions to Factory Defaults
To reset all features (except numbers stored in the phones memory) to factory defaults, press: 73738 ) from standby mode.

Deleting Menus

1 Select the Customize menu.
2 Select the Edit Menus submenu.
3 Scroll to the menu you want to delete (a menu where the name is not blinking). 4 Press YES for three seconds. Note! The menu name is blinking; it no longer appears in the reduced menu system. 5 Repeat steps 3 and 4 to delete more menus. 6 Press NO or CLR to end session. 7 Press YES to update.
Resetting Menus to Original
1 Choose the Customize menu. 2 Choose Reset.
Creating Your Own Phone Book
This chapter describes how you can store phone numbers both on your SIM Card and in your phones own memory.

About the Phone Book

2 Press twice.
twice until 6TORE is shown and press
You can store your phone numbers both on your SIM Card and in your phones own memory. The difference between the two is you can remove the SIM Card and use those telephone numbers in other phones with SIM slots, while phones memory always stays the same no matter which SIM Card is inserted. You can store up to 97 phone numbers in the phone memory. The number of phone numbers you can store on your SIM Card is SIM Card dependent.
Enter the first letter of the name by pressing the appropriate numeric key as many times as required.
Press the corresponding key this many times to get the symbol. For example, press 2, 5 times to get. B E 3 ? C F 4 ! 5 , 4 6. : 8 10 ( 11 ) 12 1

Speed Dialing

The phone numbers that you store in positions 19 on the SIM Card can be called by entering the position number and then pressing YES. You should, therefore, save positions 19 for important numbers. The number of available positions is dependent on your SIM card.

I L 5 O R V S

Storing Numbers on the SIM Card
1 Enter the phone number you wish to store.

P 8

Some menus/features are operator dependent. Y Z 9
Storing Numbers in the Phones Memory
$ % Follow the the same procedure as storing a phone number on the SIM Card through step 4. When you are prompted to set the storage position number, press # once to enter the character (which indicates storage in phone memory) and twice to have the phone suggest the first available storage position. Press YES to confirm the storage. Note! If you want to store the number in a different position, press CLR to erase the position number displayed and enter another number.

& @ /

Enter the next letter when the cursor has moved to the next letter position. The number of letters the name field can contain is SIM Card dependent. 3 Press YES after entering the name. The next available position will appear. 4 Press YES to confirm the position. 6TORED will appear. Note!
About Recalling Phone Numbers
If you have chosen a position number that is already occupied, 2VERWRITE" is displayed. Press YES to overwrite or NO to return to the position number and change it. 5 If you want to store the number in a different position, press CLR to erase the position number displayed. 6 Enter another number using the keypad. 7 Press YES. 6TORE will appear. 8 Press YES to end session.
You can recall a phone number any time from either the SIM Card or the phone memory. You can recall the phone number by either the name or the storage position number.

Recalling by Name

1 Press CLR to erase any digits from the display. 2 Select the RecallName menu. You are prompted to enter a name. 3 Enter either the full name or the first letter, and press YES.
The first name that matches the letter string is displayed. If necessary, scroll to the name you want.

About Forwarding Calls

Forwarded calls are indicated by an arrow.
When supported by your service provider, you can use the Forward menu to forward your calls to another number, such as your voice mailbox number or home phone number. Note!
If your SIM Card and your service provider support two lines, you need to set each line separately. Here we assume you have one line. The Forward service lets you forward: All calls: whether your telephone is turned on or off. Unanswered calls: if you do not answer within 30 seconds, if your phone is busy, turned off, or out of reach of a network. You can forward calls both from the reduced and extended menu. In the reduced menu you can only forward calls to one phone number; while in the extended menu, you define how you want your calls forwarded, i.e. which number and which type of calls.
Forwarding from Reduced Menu
1 Select the Forward? menu. 2 You are prompted to enter a number (if you have not previously entered a number). Or you can press the

key to enter a name.

3 Enter the desired number (or name) at the prompt and press YES.
4 There may be a short delay before the network responds and your display will read: Qvieies pyvvyih by a Forward message and phone number. The Forward? menu changes into FwdOff? when the Forward is active.
Forwarding from Extended Menu
2 Select a Forward option.
1 Select the FwdL1 or FwdL2 menu. 3 Choose Activate and press YES.
Some menus/features are operator dependent. 2 Select the Forward option you wish to cancel and choose Cancel. There may be a short delay before the network responds, but your display will advise that your forward is cancelled.
You may now do one of the following: Enter a number at the prompt where you want your calls to be Forwarded, including the area code, and press YES.
Press the to enter a name from your phone book and press YES. Use the phone number that is suggested and press
You will only get a number suggested if you have previously activated the forward function. There may be a short delay before the network responds to your Forward option, and your display will advise you when the Forward is active (on or off).
Viewing Status of Call Forward
1 Select the FwdLine menu.
2 Select the Forward option you wish to view and choose GetStatus. There may be a short delay before the network responds, and your display will advise you which Forward is active (on or off).

Canceling Call Forward

Protecting Your Keypad, Phone, and SIM Card
This chapter describes the different locks that you can use to protect your phone. These are the only ways of protecting your phone in case of theft.
enter to gain access to and activate your subscription. PIN 2, which may also be obtained, is used with special functions, such as price.

About Locks

Sending a Message (SMS)

1 Select the Send menu.
2 Select the New submenu.
3 Enter your message and press YES. You can also enter a phone number. 4 Enter the phone number, or press to enter a name you want to send to and press YES. The display now shows: Tix
Setting the Duration of the Message
1 Select the Send menu. 2 Select the Options submenu. 3 Select Valid Per. 4 Select how long you want the message to be repeated. The service center repeats the message for the set duration or until the receiver can receive it.

Receiving a Message

You will also hear a beep as loud as the ring signal and the green light on top of the phone will flash. You will receive the text message: 5EAD
Reading an Incoming Message
1 Press YES when you have received a message. The display will show the date of the incoming SMS, you can see the time by pressing *. 2 Press YES. The display will show from which phone number the message is sent, or the name if stored in your phone book. 3 Press to read the message. After Reading an Incoming Message 1 Call a phone number in the message by pressing YES.
About Other Message Types
If your service supports it, you can send an SMS from the phone to the service center and the service center can change the message into the following types : E-Mail (the address cannot contain more than 20 characters) Telex Fax (Both group 3 and 4) X400 Voice
2 Erase the message by pressing YES at the erase prompt. 3 Reply to the message if your service supports it.
Changing the Message Type
1 Select the Send menu. 2 Select the Options submenu. 3 Select Msg Type. 4 Select the desired message type.
4 Store the message by pressing NO at the erase prompt (you may get a reply prompt if the sender has requested a reply). Press YES at the Store prompt and the message is stored on the SIM.

Erasing a Message

Press CLR any time during the message and press YES.

Reading an Old Message

1 Select the Read menu.
2 Scroll to the message you want to read and press YES.
Receiving Area Information
This chapter describes how you can make your phone available for Area Information (AI). This service is network dependent.

Setting Calling Information
1 Select the Settings menu. 2 Select the Call Info submenu. 3 Select either Cost or Time Info menu.
Viewing Calling Information
There are two ways to view the calling information: 1 Look in the display for the duration or cost of your last call when it has ended. 2 Select the Info menu to view all options.

Resetting a Call Meter

1 Select the Info menu.
2 Scroll to the meter option you want to reset and press YES. 3 Press YES at the Reset prompt.

Setting the Cost Counter

1 Select the Settings menu. 36
2 Select the Call Info. menu. 3 Select Cost? 4 Select Info. menu. 5 Select the Set Price submenu. The display shows the current currency and price: &URR86' 6 Press CLR to delete the currency name.
7 Enter a new currency name and press YES.
The new currency and the old price will appear in the display: &$' 8 Press YES again to enter a new price.
The display will now show the new currency name and a blank space: &$'@ 9 Enter a new price (press * to get a decimal mark). 10 Enter PIN2 at the prompt. 11 Press YES. The display will show the new currency name and price.

Specific Data Menus

This chapter describes the different data menus that you can turn on to enable you to receive data and fax calls. You will also learn to forward the different calls.
Fax calls Data calls All numbers (including speech calls)
About Having Data Menus On
Your phone is prepared to send and receive data and fax messages in connection with an Ericsson Mobile Office solution. You need to activate the data menus to send data and faxes. Note!

Forwarding Data Calls

1 Make sure the Data menus are on. 2 Select the ForwData menu. 3 Select Activate. You may now do one of the following:
Instructions on how to use the Speech>FAX and Next Call menus are contained in the Ericsson Mobile Office Solution.

Activating Data Menus

1 Select the Settings menu. 2 Select the Data Menus submenu. 3 Select the On option. Your phone will now have a new menu structure in the extended mode.
4 Enter a number where you want your calls to be forwarded, including the area code, and press YES.
5 Press to enter a name from your phone book and press YES. 6 Use the phone number that is suggested to you and press YES. You will only get a number suggested when you have previously activated the forward function before. There may be a short delay before the network responds to your forward option.

3 Press YES to select a network. When you have made a network selection, Networks? is shown whenever the phone cannot contact the desired network. You can now either:
4 Select a new network or set the phone in automatic search mode.
Setting the Phone to perform an Automatic Network Search
1 Select the Networks menu. 2 Scroll, after the search, to Auto and press YES.
Making Your Personal Ring Signal
This chapter describes how you can make your own ring signal. You will find one example of how to make a simple melody and one example of a more complex melody. You will also find a table of sample melodies that you can use.

Press This: CLR

To: Erase the note to the left of the cursor, If you press and hold CLR, the whole melody is erased.

Press This: 1-9

Insert notes where 1 gives a C and 9 a high D.

Musical Keypad

Increase or decrease the pitch in half tone steps. Press once to get a sharp (#), twice for a flat (B), or three times to get the normal pitch. Insert a short pause. Scroll within the melody. Press and hold to get to the beginning or end of the melody. Get either a higher or lower octave for the note you have inserted. You know it is higher if a plus sign is added in front of the note name.
This musical illustration helps you understand which key corresponds with which note on the keypad.

Simple Melody

Some menus/features are operator dependent. 8 Press the 4 key twice.
The simple melody is Do-Re-Me. This song corresponds to the C, D, and E tones on a music scale.

Making Do-Re-Me

1 Select Edit Melody in the Settings menu. 2 Press the 1 key. The display will now show a c. 3 Press the 2 key. 4 Press the 3 key.
9 Press the 3 key twice. 10 Press the 2 key twice. 11 Press and hold down the 1 key until a C+ appears. 12 Press YES to test the melody. 13 Press YES to store the melody as an alternative in the Ring Type menu. Note! Slow down a melody by adding pauses between each key press.
5 Press YES to test the melody. The phone plays the melody and asks you if you want to save the melody. 6 Press YES to save the melody as an alternative in the Ring Type menu.

Complex Melody

The complex melody is Twinkle, Twinkle Little Star first section. This section corresponds to F, F, C, C, D and C tones on a music scale.