Ericsson T65 and USB cable 4040032.
045hkovajko 1 posts since Aug 25, 2010
Hi, i would like to synchronize my mobile phone Ericsson T65 and send SMS messages. So i buy USB cable 4040032 (Susteen, Inc. SonyEricsson DCU-11 Cable). Now, i have trouble with sending SMS. I am uning Windows 2003 Server and Linux Debian Lenny. I tried use Sony Ericsson PC Suite and Gammu. Drivers were installed successfully. But i can't send SMS. Sonny Ericsson PC Suite can't find mobile phone. Driver for USB cable was found, but not mobile phone. Exactly same in Linux using Gammu.
What i am doing wrong? Please help.
i am using Debian Lenny and Gammu 1.20.0 and i would like to send SMS using Gammu, Ericsson T65 and USB cable 4040032 (Susteen, Inc. SonyEricsson DCU-11 Cable). When i am trying to send SMS using Gammu it fails with: # echo "skuska" | /usr/bin/gammu sendsms TEXT +xxxxxxxxxxxx No response in specified timeout. Probably phone not connected.
I think everything is correct in my ~/.gammurc [gammu] port = /dev/ttyUSB0 connection=at19200
I tried various types of connection (at, at115200), but no success - still same error. Here is my lsmod:
Generated by Jive SBS on 2011-06-08+01:00 1
# lsmod | grep pl2303 pl0 usbserial pl2303 usbcore pl2303,usbserial,usbhid,uhci_hcd
Here is my lsusb: # lsusb -v -d 0731:0528 Bus 001 Device 010: ID 0731:0528 Susteen, Inc. SonyEricsson DCU-11 Cable Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSizeidVendor 0x0731 Susteen, Inc. idProduct 0x0528 SonyEricsson DCU-11 Cable bcdDevice a0.01 iManufacturer 0 iProduct 0 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0
Generated by Jive SBS on 2011-06-08+01:00 2
(Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x000a 1x 10 bytes bInterval 1 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes
Generated by Jive SBS on 2011-06-08+01:00 3
bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)
My dmseg messages: oracle:/home/oracle# dmesg | tail [10728.968039] eth0: no IPv6 routers present [13308.840077] usb 1-2: USB disconnect, address 8 [13308.840482] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [13308.840508] pl2303 1-2:1.0: device disconnected [13714.064069] usb 1-2: new full speed USB device using uhci_hcd and address 10 [13714.212332] usb 1-2: configuration #1 chosen from 1 choice [13714.216691] pl2303 1-2:1.0: pl2303 converter detected [13714.232719] usb 1-2: pl2303 converter now attached to ttyUSB0 [13714.233010] usb 1-2: New USB device found, idVendor=0731, idProduct=0528 [13714.233017] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 oracle:/home/oracle# dmesg | grep tty [ 0.004000] console [tty0] enabled [ 1.551415] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.551582] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Generated by Jive SBS on 2011-06-08+01:00 4
[ 1.552887] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.553188] 00:03: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 3163.765215] usb 1-2: pl2303 converter now attached to ttyUSB0 [ 6506.448477] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 6511.063676] usb 1-2: pl2303 converter now attached to ttyUSB0 [ 6527.032469] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 6538.644364] usb 1-2: pl2303 converter now attached to ttyUSB0 [ 9046.960535] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [ 9063.252001] usb 1-2: pl2303 converter now attached to ttyUSB0 [13308.840482] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 [13714.232719] usb 1-2: pl2303 converter now attached to ttyUSB0

When i am tring connect with Wammu, it fails with: # cat /root/wammu.log --------------- System information ---------------Platform linux2 Python 2.5.2 wxPython 2.8.7.1 Wammu 0.28 python-gammu 0.26 Gammu 1.20.0 Bluetooth PyBluez locales en_US (UTF8) connection at device /dev/ttyUSB0 model at Tue 2010/08/24 12:51:33: [Gammu - 1.20.0 built 23:45:36 May using GCC 4.2] Tue 2010/08/24 12:51:33: [Connection - "at"] Tue 2010/08/24 12:51:33: [Connection index - 0] Tue 2010/08/24 12:51:33: [Model type - "at"]
Generated by Jive SBS on 2011-06-08+01:00 5
Tue 2010/08/24 12:51:33: [Device - "/dev/ttyUSB0"] Tue 2010/08/24 12:51:33: [Runing on - Linux, kernel 2.6.26-2-686 (#1 SMP Mon Jun 21 05:58:44 UTC 2010)] Tue 2010/08/24 12:51:33: [Module - "A2D|iPAQ|at|M20|S25|MC35|TC35|C35i|S65| S300|5110|5130|5190|5210|6110|6130|6150|6190|6210|6250|6310|6310i|6510|7110|8210| 8250|8290|8310|8390|8850|8855|8890|8910|9110|9210"] Tue 2010/08/24 12:51:33: Serial device: DTR is up, RTS is up, CAR is up, CTS is down Tue 2010/08/24 12:51:33: Setting speed to 19200 Tue 2010/08/24 12:51:33: Escaping SMS mode Tue 2010/08/24 12:51:33: SENDING frametype 0x00/length 0x02/2 Tue 2010/08/24 12:51:33: 1B |0D. Tue 2010/08/24 12:51:34: Sending simple AT command to wake up some devices Tue 2010/08/24 12:51:34: SENDING frametype 0x00/length 0x03/3 Tue 2010/08/24 12:51:34: 41A|54T|0D AT. Tue 2010/08/24 12:51:36: [Retrying 1 type 0x00] Tue 2010/08/24 12:51:36: SENDING frametype 0x00/length 0x03/3 Tue 2010/08/24 12:51:36: 41A|54T|0D AT. Tue 2010/08/24 12:51:38: [Retrying 2 type 0x00] Tue 2010/08/24 12:51:38: SENDING frametype 0x00/length 0x03/3 Tue 2010/08/24 12:51:38: 41A|54T|0D AT. Tue 2010/08/24 12:51:40: Enabling echo Tue 2010/08/24 12:51:40: SENDING frametype 0x00/length 0x05/5 Tue 2010/08/24 12:51:40: 41A|54T|45E|311|0D ATE1. Tue 2010/08/24 12:51:43: [Retrying 1 type 0x00] Tue 2010/08/24 12:51:43: SENDING frametype 0x00/length 0x05/5 Tue 2010/08/24 12:51:43: 41A|54T|45E|311|0D ATE1. Tue 2010/08/24 12:51:46: [Retrying 2 type 0x00] Tue 2010/08/24 12:51:46: SENDING frametype 0x00/length 0x05/5 Tue 2010/08/24 12:51:46: 41A|54T|45E|311|0D ATE1. Tue 2010/08/24 12:51:49: Init:Phone->Initialise failed with error TIMEOUT[14]: No response in specified timeout. Probably phone not connected. Tue 2010/08/24 12:51:49: Entering GSM_SetIncomingSMS Tue 2010/08/24 12:51:49: Getting available SMS memories
Generated by Jive SBS on 2011-06-08+01:00 6
Tue 2010/08/24 12:51:49: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:51:49: 41A|54T|2B+|43C|50P|4DM|53S|3D=|3F?|0D AT +CPMS=?. Tue 2010/08/24 12:51:53: [Retrying 1 type 0x00] Tue 2010/08/24 12:51:53: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:51:53: 41A|54T|2B+|43C|50P|4DM|53S|3D=|3F?|0D AT +CPMS=?. Tue 2010/08/24 12:51:57: [Retrying 2 type 0x00] Tue 2010/08/24 12:51:57: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:51:57: 41A|54T|2B+|43C|50P|4DM|53S|3D=|3F?|0D AT +CPMS=?. Tue 2010/08/24 12:52:01: Setting SMS memory type to ME Tue 2010/08/24 12:52:01: SENDING frametype 0x00/length 0x0D/13 Tue 2010/08/24 12:52:01: 41A|54T|2B+|43C|50P|4DM|53S|3D=|22"|4DM|45E|22"|0D AT+CPMS="ME". Tue 2010/08/24 12:52:21: [Retrying 1 type 0x00] Tue 2010/08/24 12:52:21: SENDING frametype 0x00/length 0x0D/13 Tue 2010/08/24 12:52:21: 41A|54T|2B+|43C|50P|4DM|53S|3D=|22"|4DM|45E|22"|0D AT+CPMS="ME". Tue 2010/08/24 12:52:41: [Retrying 2 type 0x00] Tue 2010/08/24 12:52:41: SENDING frametype 0x00/length 0x0D/13 Tue 2010/08/24 12:52:41: 41A|54T|2B+|43C|50P|4DM|53S|3D=|22"|4DM|45E|22"|0D AT+CPMS="ME". Tue 2010/08/24 12:53:01: GSM_SetIncomingSMS failed with error TIMEOUT[14]: No response in specified timeout. Probably phone not connected. Tue 2010/08/24 12:53:01: Leaving GSM_SetIncomingSMS Tue 2010/08/24 12:53:01: Entering GSM_SetIncomingCall Tue 2010/08/24 12:53:01: Disabling incoming call Tue 2010/08/24 12:53:01: Leaving GSM_SetIncomingCall Tue 2010/08/24 12:53:01: Entering GSM_SetIncomingCB Tue 2010/08/24 12:53:01: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:53:01: 41A|54T|2B+|43C|4EN|4DM|49I|3D=|3F?|0D AT +CNMI=?. Tue 2010/08/24 12:53:05: [Retrying 1 type 0x00]

Generated by Jive SBS on 2011-06-08+01:00 7
Tue 2010/08/24 12:53:05: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:53:05: 41A|54T|2B+|43C|4EN|4DM|49I|3D=|3F?|0D AT +CNMI=?. Tue 2010/08/24 12:53:09: [Retrying 2 type 0x00] Tue 2010/08/24 12:53:09: SENDING frametype 0x00/length 0x0A/10 Tue 2010/08/24 12:53:09: 41A|54T|2B+|43C|4EN|4DM|49I|3D=|3F?|0D AT +CNMI=?. Tue 2010/08/24 12:53:13: GSM_SetIncomingCB failed with error TIMEOUT[14]: No response in specified timeout. Probably phone not connected. Tue 2010/08/24 12:53:13: Leaving GSM_SetIncomingCB Tue 2010/08/24 12:53:13: Entering GSM_SetIncomingUSSD Tue 2010/08/24 12:53:13: SENDING frametype 0x00/length 0x09/9 Tue 2010/08/24 12:53:13: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT +CSCS?. Tue 2010/08/24 12:53:16: [Retrying 1 type 0x00] Tue 2010/08/24 12:53:16: SENDING frametype 0x00/length 0x09/9 Tue 2010/08/24 12:53:16: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT +CSCS?. Tue 2010/08/24 12:53:19: [Retrying 2 type 0x00] Tue 2010/08/24 12:53:19: SENDING frametype 0x00/length 0x09/9 Tue 2010/08/24 12:53:19: 41A|54T|2B+|43C|53S|43C|53S|3F?|0D AT +CSCS?. Tue 2010/08/24 12:53:22: GSM_SetIncomingUSSD failed with error TIMEOUT[14]: No response in specified timeout. Probably phone not connected. Tue 2010/08/24 12:53:22: Leaving GSM_SetIncomingUSSD Tue 2010/08/24 12:53:22: [Terminating] Tue 2010/08/24 12:53:22: [Closing]
What am i doing wrong? Thanks a lot! dash
Generated by Jive SBS on 2011-06-08+01:00 8

Configuration of Laptop for SunSurf Mobile using Ericsson T65

Prerequisites

Laptop running on minimum Microsoft Windows 95/98 CD-ROM containing Ericsson Communications Suite software or you may download the modem driver from www.ericsson.com/consumers Compatible serial data cable CID number of MobileNet (Under T39:4Settings / T68:Connect > Data comm. > 1Data accounts > SunSurf Mobile)

Configuration of Phone

1. Press the right Menu button to scroll to 4Settings and press the YES button on the left. 2. Scroll down to Data comm. and press YES. 3. Select 1Data accounts and press YES. 4. Select Add account? and press YES. Select GPRS data and press YES. Enter SunSurf Mobile and press YES. 5. Enter the following: APN: sunsurf User id: 65xxxxxxxx (where the last 8-digit is your mobile phone number) Password: user123 Scroll down to Save? and press YES. 6. Return to Data accounts. Scroll to SunSurf Mobile and press YES. Take note of the 3CID number. 7. If you encounter problems connecting to SunSurf Mobile, check the following settings: At Settings > Data comm. > 1Data accounts > SunSurf Mobile > 1Edit, Under 4Password request, select Off Under 5Allow calls, select Automatic Under 7Advan. settings,
Authentication, select Normal Data compr., select Off Header compr., select Off Quality of serv., select Subscribed for 1Precedence, 2Delay, 3Reliability, Peak rate and 5Mean rate
At Settings > Data comm. > 2Pref. service, select GPRS and GSM

Page 1 of 3

Installation of Ericsson Communications Suite
8. Load the CD-ROM into the CD drive of the laptop or run the software downloaded from the web-site. 9. Install the Ericsson Communications Suite or the relevant software. 10. Follow through the instructions and click Finish to complete the installation. 11. Restart the laptop as instructed. 12. Go to Start > Settings > Control Panel, double-click on Modems. 13. Select the General tab and click Add. 14. Select Others and click Next. 15. Select Dont detect my modem; I will select it from a list and click Next. 16. Under Manufacturers, select Ericsson. Under Models, select Ericsson T39 Cable Modem. Click Next. 17. Select Communications Port (COM1). Click Next and click Finish.

Configuration of Laptop

18. On your desktop, double-click on My Computer and then Dial-Up Networking. 19. Double-click on Make New Connection. 20. Type in SunSurf Mobile and select Ericsson T39 Cable Modem. 21. Click on Configure and under Maximum speed, select 115200 and click OK. Click Next. 22. Under Telephone number, type in *99***X#, with X being the CID number of SunSurf Mobile. (See step 6) 23. Click Next and click Finish. 24. Under Dial-Up Networking, right-click on SunSurf Mobile and select Properties. 25. At General tab, deselect Use area code and Dialing Properties. 26. Select the Server Types tab. Under Type of Dial-Up Server, select PPP: Internet, Windows NT Server, Windows 98. 27. Ensure that only TCP/ IP is selected. Deselect the others. 28. Click on TCP/ IP Settings. Select Server assigned IP address and select Specify name server addresses. Type in the following: Primary DNS: 202.079.064.021
Secondary DNS: 202.079.064.026
29. Deselect Use IP header compression. 30. Select Use default gateway on remote network.

Page 2 of 3

31. Click OK twice to exit from the window.
Connection to M1 GPRS Network
32. Connect the mobile phone to the laptop with the serial data cable. 33. Under Dial-Up Networking, double-click on SunSurf Mobile. 34. Type in the following: User name: 65xxxxxxxx (where the last 8-digit is your mobile phone number) Password: user123 35. Click Connect. 36. You can now launch your browser to surf the Internet. 37. To disconnect, double-click on SunSurf Mobile and click Disconnect.

Page 3 of 3