ESET NOD32 Antivirus for IBM Lotus Domino

Installation

Copyright ESET, spol. s r. o. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical, for any purpose without the express written permission of ESET,spol.sr.o. Information in this document is subject to change without prior notice. Certain names of program products and company names used in this document might be registered trademarks or trademarks owned by other entities. ESET, NOD32 and AMON are trademarks of ESET, spol. s r. o. Microsoft and Windows are registered trademarks of Microsoft Corporation.
ESET, spol. s r. o. Einsteinova 24, Bratislava, Slovak Republic http://www.eset.eu Customer Care Worldwide: www.eset.eu/support Customer Care North America: www.eset.com/support REV.20100927-006

1. Introduction

ESET NOD32 Antivirus for Lotus Domino (AMFE) is a Lotus Domino server addin, built upon the state-of-theart NOD32 scanning engine. It was designed to protect email communication from virus infiltrations propagating by e-mail, and to lower the e-mail traffic by filtering out undesired e-mail attachments. ESET NOD32 Antivirus for Lotus Domino utilizes the same engine as NOD32 2.7, including archive scanning, advanced heuristics, adware/spyware/riskware detection, etc.
Before you install Prior to installing ESET NOD32 Antivirus for Lotus Domino, make sure that NOD32 2.7 is already installed on the Lotus Domino server. NOD32 2.7 as well as ESET NOD32 Antivirus for Lotus Domino is available for download from Esets website http://www.eset.com/download/ using your username and password. For more information about installing NOD32, read the quick installation guide available at http://www.eset.com/download/manual.htm. After NOD32 installation set in the AMON module in Extension Editor the TMP files not to be checked. Before you start the installation (uninstallation) of ESET NOD32 Antivirus for Lotus Domino, quit the Lotus Domino Server. Installing ESET NOD32 Antivirus for Lotus Domino Installation process: 1. extract the installation package downloaded from Esets website or shipped on a CD 2. navigate to the temporary folder, and run the appropriate setup file for your oper. system: setup2k.exe for Windows 2000 / 2003 server setupnt.exe for Windows NT server 3. the installer will search for the current Lotus Domino notes.ini file and will offer to use the first file found. After the file has been found, confirm it by typing y and pressing ENTER to go ahead with the installation (img. 1) 4. if the found notes.ini file is not the right file, then type n and press ENTER to continue 5. type the path to the correct notes.ini and press ENTER (img. 2) 6. enter the name of a new subdirectory in the Lotus Domino data folder where you want the file to be cre-

2. Quick Installation

System requirements Supported operating systems Microsoft Windows NT 4.0 Microsoft Windows Server 2000 Microsoft Windows Server 2003 Supported versions of IBM Lotus Domino: IBM Lotus Domino R5 (5.0.9a & higher) IBM Lotus Domino R6 IBM Lotus Domino R6.5 IBM Lotus Domino R7 IBM Lotus Domino R8 IBM Lotus Domino R8.5 Supported ESET product: ESET NOD32 for Windows version 2.7 NOTE: ESET NOD32 Antivirus 2.7 does not support 64-bit installations of IBM Lotus Domino. (img. 1) (img. 2)

(img. 3)

(img. 4)

(img. 5)

(img. 6)
ated, and where the ESET NOD32 Antivirus for Lotus Domino databases will be copied to, and press ENTER (img. 3) 7. wait for the installation to complete 8. after the installation has completed, press any key to exit the installation dialog (img. 4) After installation, before Lotus Domino server startup, enter a license key for ESET NOD32 Antivirus for Lotus Domino product to NOD32 Control Center (NOD32 Control Center > NOD32 system tools > Settings > License Keys). The license key is sent to your contact address together with authorization data by ESET spol. s r. o. After entering the license key, start Lotus Domino server. At the server startup, ESET NOD32 Antivirus for Lotus Domino (AMFE) will be loaded. (img. 6) After a successful installation, the following files will be created in the specified folder (i.e. in the Lotus Domino data subfolder): AMFE help.nsf AMFE log.nsf AMFE Mail Review.nsf AMFE Quarantine.nsf AMFE Setup.nsf
Uninstalling ESET NOD32 Antivirus for Lotus Domino The steps 1 to 5 are identical with those for installation. 6. after the installer has recognized a previous installation of ESET NOD32 Antivirus for Lotus Domino, it will offer you to uninstall it from the computer. Type y and press ENTER (img. 5) 7. wait for the uninstallation to complete 8. after the uninstallation has completed, press any key to close the installation dialog

3. Setup

ESET NOD32 Antivirus for Lotus Domino Setup (AMFE Setup)
Text to append to bottom of message: - the text message appended at the end of infected e-mails. Setting up actions that are applied after successful or unsuccessful cleaning: Replace file in message cleans infected files (cleanable) Delete file from message deletes infected files (regardless of whether they are cleanable or non-cleanable) Place text into file body replaces the body of infected files with a text message (the text of the e-mail will be replaced with the text you enter here) Make log entry enables logging Append virus info to message adds information about detected threat to email Place infected file into quarantine database moves infected files to quarantine (img. 8). Mail Filter Setup: ESET NOD32 Antivirus for Lotus Domino enables email filtering based on specified criteria. The filtering can be accomplished by applying various rules. By adjusting the filters the proper way, it is possible to filter out spam effectively. To create a new filter, click the New Mail Filter button. To assign different priorities to the filters, move them up and down using the arrow keys. The higher a filter is listed, the higher priority it has. To switch a filter on/off, select a filter and click the Enable / Disable button. The Filter Settings are displayed after double-clicking

To configure ESET NOD32 Antivirus for Lotus Domino, open Domino Administrator or your Lotus Notes client (Workspace). To launch ESET NOD32 Antivirus for Lotus Domino, click the Enable button in the upper part of the AMFE Setup (Service status:). After ESET NOD32 Antivirus for Lotus Domino starts, Lotus Domino Server must be restarted (img. 7). The settings are divided into two groups: Antiviral Engine Setup: To display the Engine settings, double click on the setup document. By default, the settings are displayed in view mode. To edit the settings, click the Edit button. Settings: Status (Enabled/Disabled) toggles the checking on/off (img. 7)

(img. 8)

the filter. By default, the settings are displayed in view mode. To edit them, click the Edit Button. Settings Status (Enabled/Disabled) enables/disables the filter Description name of the filter. Filter settings From contains filters by sender To contains filters by addressee Subject contains filters by subject Body contains filters by text in the e-mail body Attachments size filters by the size of attachment Action to take actions applicable to e-mail messages Delete (reject) message deletes filtered messages Move message to mail review database moves messages to the review database Log Message to mail review database and
deliver the message delivers messages to their addressees and places a copy of the messages to the review database Remove attachments and deliver deletes attachments and delivers messages subsequently. Strings used for filtering email must commence and end with an asterisk (e.g. *viagra*). Wildcards can also be used. A question mark (?) substitutes any one character, while an asterisk (*) substitutes zero or more arbitrary characters. Use a semicolon (;) to delimit multiple strings, if necessary. Example: To filter out email from the hotmail.com and yahoo.com domains, enter **@hotmail.com*;**@yahoo.com* to the From contains field.
4. Log, Mail Review and Quarantine database maintenance

AMFE Log Database

contains a review of all infected e-mails detected. The database also provides information about the time an incident occurred, the name of the threat as well as the re6
cipient. The information in the database can be sorted by date or the name of the threats. To enable database logging, select Make log entry, which is located in the Mail Filter setup. Quarantine Database

the Quarantine database keeps track of all infected files detected. If needed, the files can be recovered. As in the previous case, items in quarantine can be arranged by date or name of infiltration. To store infected files in quarantine, select Place infected file into quarantine database, found in the Mail Filter Setup. Mail Review Database
contains all e-mails that have been filtered. Messages are divided into delivered and undelivered. E-mail messages delivered to their respective addressees are indicated by this icon (when displaying all messages). Undelivered e-mails can be sent back to their addressees to do so, select messages and click on the Deliver button.

ESET NOD32 Antivirus for IBM Lotus Domino

Installation

Copyright ESET, spol. s r. o. All rights reserved.
No part of this document may be reproduced or transmitted in any form or by any means electronic or mechanical, for any purpose without the express written permission of ESET,spol.sr.o. Information in this document is subject to change without prior notice. Certain names of program products and company names used in this document might be registered trademarks or trademarks owned by other entities. ESET, NOD32 and AMON are trademarks of ESET, spol. s r. o. Microsoft and Windows are registered trademarks of Microsoft Corporation.
ESET, spol. s r. o. Einsteinova 24, Bratislava, Slovak Republic http://www.eset.eu Customer Care Worldwide: www.eset.eu/support Customer Care North America: www.eset.com/support REV.20101130-007

1. Introduction

ESET NOD32 Antivirus for Lotus Domino (AMFE) is a Lotus Domino server addin, built upon the state-of-theart NOD32 scanning engine. It was designed to protect email communication from virus infiltrations propagating by e-mail, and to lower the e-mail traffic by filtering out undesired e-mail attachments. ESET NOD32 Antivirus for Lotus Domino utilizes the same engine as NOD32 2.7, including archive scanning, advanced heuristics, adware/spyware/riskware detection, etc.
Before you install The installation package contains all necessary files to optimally set up the ESET NOD32 Antivirus for Lotus Domino server - ESET NOD32 Antivirus v2.7 (ndntenst.exe), the ESET NOD32 Antivirus for Lotus Domino addin (nod32domen.exe) and this manual. ESET NOD32 Antivirus for Lotus Domino works as an addin for the Lotus Domino server, that utilizes the ESET NOD32 Antivirus version 2.7 (NOD32 v2.7) scanning engine. Before starting the installation of ESET NOD32 Antivirus for Lotus Domino we recommend you make sure NOD32 v2.7 is installed on the Lotus Domino server. Please note, that NOD32 version 2.7 must be installed on the server before you can continue with the installation. In your installed NOD32 v2.7 on the server go to the Extensions editor in the AMON module and set up an exclusion for files with the TMP extension from scanning. You must stop the Lotus Domino Server service, before you can install (uninstall) ESET NOD32 Antivirus for Lotus Domino. Installing ESET NOD32 Antivirus for Lotus Domino Installation process: 1. extract the nod32domen.exe installation package 2. navigate to the temporary folder, and run the appropriate setup file for your oper. system: setup2k.exe for Windows 2000 / 2003 server setupnt.exe for Windows NT server 3. the installer will search for the current Lotus Domino notes.ini file and will offer to use the first file found. After the file has been found, confirm it by typing y and pressing ENTER to go ahead with the installation (img. 1) 4. if the found notes.ini file is not the right file, then type n and press ENTER to continue

2. Quick Installation

System requirements Supported operating systems Microsoft Windows NT 4.0 Microsoft Windows Server 2000 Microsoft Windows Server 2003 Supported versions of IBM Lotus Domino: IBM Lotus Domino R5 (5.0.9a & higher) IBM Lotus Domino R6 IBM Lotus Domino R6.5 IBM Lotus Domino R7 IBM Lotus Domino R8 IBM Lotus Domino R8.5 Supported ESET product: ESET NOD32 for Windows version 2.7 NOTE: ESET NOD32 Antivirus 2.7 does not support 64-bit installations of IBM Lotus Domino. (img. 1) (img. 2)

(img. 3)

(img. 4)

(img. 5)

(img. 6)
5. type the path to the correct notes.ini and press ENTER (img. 2) 6. enter the name of a new subdirectory in the Lotus Domino data folder where you want the file to be created, and where the ESET NOD32 Antivirus for Lotus Domino databases will be copied to, and press ENTER (img. 3) 7. wait for the installation to complete 8. after the installation has completed, press any key to exit the installation dialog (img. 4) After installation, before Lotus Domino server startup, enter a license key for ESET NOD32 Antivirus for Lotus Domino product to NOD32 Control Center (NOD32 Control Center > NOD32 system tools > Settings > License Keys). The license key is sent to your contact address together with authorization data by ESET spol. s r. o. After entering the license key, start Lotus Domino server. At the server startup, ESET NOD32 Antivirus for Lotus Domino (AMFE) will be loaded. (img. 6) After a successful installation, the following files will be created in the specified folder (i.e. in the Lotus Domino data subfolder): AMFE help.nsf AMFE log.nsf

AMFE Mail Review.nsf AMFE Quarantine.nsf AMFE Setup.nsf Uninstalling ESET NOD32 Antivirus for Lotus Domino The steps 1 to 5 are identical with those for installation. 6. after the installer has recognized a previous installation of ESET NOD32 Antivirus for Lotus Domino, it will offer you to uninstall it from the computer. Type y and press ENTER (img. 5) 7. wait for the uninstallation to complete
8. after the uninstallation has completed, press any key to close the installation dialog
Settings: Status (Enabled/Disabled) toggles the checking on/off Text to append to bottom of message: - the text message appended at the end of infected e-mails. Setting up actions that are applied after successful or unsuccessful cleaning: Replace file in message cleans infected files (cleanable) Delete file from message deletes infected files (regardless of whether they are cleanable or non-cleanable) Place text into file body replaces the body of infected files with a text message (the text of the e-mail will be replaced with the text you enter here) Make log entry enables logging Append virus info to message adds information about detected threat to email Place infected file into quarantine database moves infected files to quarantine (img. 8). Mail Filter Setup: ESET NOD32 Antivirus for Lotus Domino enables email filtering based on specified criteria. The filtering can be accomplished by applying various rules. By adjusting the filters the proper way, it is possible to filter out spam effectively. To create a new filter, click the New Mail Filter button. To assign different priorities to the filters, move them up and down using the arrow keys. The higher a filter is lis-

3. Setup

ESET NOD32 Antivirus for Lotus Domino Setup (AMFE Setup)
To configure ESET NOD32 Antivirus for Lotus Domino, open Domino Administrator or your Lotus Notes client (Workspace). To launch ESET NOD32 Antivirus for Lotus Domino, click the Enable button in the upper part of the AMFE Setup (Service status:). After ESET NOD32 Antivirus for Lotus Domino starts, Lotus Domino Server must be restarted (img. 7). The settings are divided into two groups: Antiviral Engine Setup: To display the Engine settings, double click on the setup document. By default, the settings are displayed in view mode. To edit the settings, click the Edit button. (img. 7)

(img. 8)

ted, the higher priority it has. To switch a filter on/off, select a filter and click the Enable / Disable button. The Filter Settings are displayed after double-clicking the filter. By default, the settings are displayed in view mode. To edit them, click the Edit Button. Settings Status (Enabled/Disabled) enables/disables the filter Description name of the filter. Filter settings From contains filters by sender To contains filters by addressee Subject contains filters by subject Body contains filters by text in the e-mail body Attachments size filters by the size of attachment Action to take actions applicable to e-mail messages Delete (reject) message deletes filtered messages

Move message to mail review database moves messages to the review database Log Message to mail review database and deliver the message delivers messages to their addressees and places a copy of the messages to the review database Remove attachments and deliver deletes attachments and delivers messages subsequently. Strings used for filtering email must commence and end with an asterisk (e.g. *viagra*). Wildcards can also be used. A question mark (?) substitutes any one character, while an asterisk (*) substitutes zero or more arbitrary characters. Use a semicolon (;) to delimit multiple strings, if necessary. Example: To filter out email from the hotmail.com and yahoo.com domains, enter **@hotmail.com*;**@yahoo.com* to the From contains field.
4. Log, Mail Review and Quarantine database maintenance

AMFE Log Database

contains a review of all infected e-mails detected. The database also provides information about the time an incident occurred, the name of the threat as well as the recipient. The information in the database can be sorted by date or the name of the threats. To enable database logging, select Make log entry, which is located in the Mail Filter setup. Quarantine Database
the Quarantine database keeps track of all infected files detected. If needed, the files can be recovered. As in the previous case, items in quarantine can be arranged by date or name of infiltration. To store infected files in quarantine, select Place infected file into quarantine database, found in the Mail Filter Setup. Mail Review Database
contains all e-mails that have been filtered. Messages are divided into delivered and undelivered. E-mail messages delivered to their respective addressees are indicated by this icon (when displaying all messages). Undelivered e-mails can be sent back to their addressees to do so, select messages and click on the Deliver button.