Economy Multiparameter Bench Meter

CyberScan PC 510 Meter

pH / mV / Conductivity / TDS / oC / oF
Microprocessor Based User Customizable Setup Multi-point Push Button Calibration Auto Buffer Recognition (pH) Selectable NIST or USA pH buffer standards Selectable Temperature Coefficient Selectable Normalization Temperature & TDS Factor Auto Ranging Capability Auto-hold Easy Toggle Between pH, mV, Conductivity & TDS

Technology Made Easy.

Splash-proof Keypad

Large Customized LCD

Back Panel
Integrated Electrode Holder
The CyberScan Series PC 510 meter is equipped with an Application Specific Integrated Circuit (ASIC). The ASIC microprocessor provides a high level of sophistication with several advanced features, while maintaining a user-friendly interface. USER CUSTOMIZATION The CyberScan PC 510 Multi-parameter meter permits user-customization of the following functions: Stability Unit of temperature measurement (C/F) Temperature Coefficient Normalization Temperature Selection of pH buffer standards. MULTI-PARAMETER MEASUREMENT The CyberScan PC 510 measures pH, Conductivity, TDS with temperature. The mV mode is useful for electrode diagnosis. MULTI-POINT PUSH BUTTON CALIBRATION The PC 510 allows up to 5-point pH calibration and 5-point Conductivity/TDS calibration (one point per range). This improves accuracy and linearity across all ranges. Auto-buffer recognition with the choice of USA or NIST buffer standards makes pH calibration procedure simple and easy. Built-in Automatic Temperature Compensation guarantees high accuracy levels under varying temperature conditions. AUTO-RANGING The PC 510 meter is quick to detect and switch to appropriate Conductivity & TDS measuring range, thus eliminating guesswork. EASE OF USE Temperature Coefficient, Normalization Temperature & TDS values can be manually keyed in for accurate measurements. Auto-Hold function automatically freezes value when reading stabilizes and user can manually activate HOLD function via keypad to momentarily freeze readings for later reading and recording. EASY-TO-READ DISPLAY The large LCD (Liquid Crystal Display) shows both primary (pH or Conductivity) and secondary (temperature) values measured, complete with mode and units of measure. Graphic symbols and self-diagnostic message codes, such as condition of electrode, provide user comprehensive information for easy and trouble-free operation. CONDUCTIVITY & pH ELECTRODE WITH BUILT-IN TEMPERATURE SENSOR The conductivity electrode has a built-in temperature sensor and is specially designed to minimise bubble entrapment during measurement. The rugged epoxy body pH electrode has a polymer gel which is non-degradable and resistant to bacterial and fungal attack. In addition, the doublejunction pH electrode has the reference element isolated within a second chamber, minimizing contamination, and extending useful life of the electrode. INNOVATIVE DESIGN A handy slide-out instruction card serves as a reference guide for keypad functions and troubleshooting. Keypad is splash-proof to protect the meter from accidental spills. Tactile feedback during operation confirms key selection. Non-skid rubber pads immobilise meter during operation. A built-in electrode holder provides table top convenience and is a space saver.

SPECIFICATIONS

CyberScan PC 510 Meter pH Range -2.00 to 16.00 pH Resolution / Accuracy 0.01 pH / 0.01 pH Calibration Up to 5 points USA (pH 1.68, 4.01, 7.00, 10.01 12.45) NIST (pH 1.68, 4.01, 6.86, 9.18, 12.45) pH Slope & Offset Display Yes mV Range - 600 to 600 mV Resolution / Accuracy 0.1 mV / 0.2 mV (below 200 mV) 1 mV / 2 mV (above 200 mV) Conductivity Range 0 to 19.99, 199.9, 1999 S / cm; 19.99, 199.9 mS / cm Resolution 0.01, 0.1, 1 S / cm; 0.01, 0.1 mS / cm TDS Range 0 to 9.99, 99.9, 999 ppm; 9.99, 99.9 ppt, Max. of 199.9 ppt based on factor setting Resolution 0.01, 0.1, 1 ppm; 0.01, 0.1 ppt Accuracy 1% Full Scale + 1 digit Calibration Up to 5 points (1 point per range) Cell Constant (k) 1.0 Conductivity to TDS 0.40 to 1.00 (adjustable) Conversion factor Temperature Coefficient 0.0 to 10.0% per C (adjustable) Normalization Temperature 15.0 to 30.0 C (adjustable) Auto-ranging Yes Temperature Range -10.0 to 110.0 C (14.0 F to 230.0 F) Resolution / Accuracy 0.1 C (0.1 F) / 0.5 C (0.5 F) Temperautre Compensation Automatic / Manual (0 to 80 C) Operating Temperature 0 to 50 C Averaging / Stability Yes (Selectable) (READY) / Auto-hold HOLD function Yes Display Custom Dual LCD Inputs BNC (for pH) and 6-pin connector (for Temperature and Conductivity) Power Requirements 9 VDC Dimension / Weight Meter: 18 x 23 x 6 cm; 570 g Boxed: 40 x 26 x 9 cm; 1400 g

ORDERING INFORMATION

Order No.

EC-PCWP510/03S

CyberScan PC 510 meter with EC-FE72522-01B, EC-CONSEN91W and integral electrode stand EC-FE72522-01B Epoxy body double junction pH electrode (1m cable) EC-CONSEN91W Plastic body Conductivity electrode (k=1.0) with 2 stainless steel rings and built-in temperature sensor EC-PHWPTEM-01W Temperature probe EC-120-ADA AC / DC power adapter (120 VAC, 50/60 Hz) EC-220-ADA AC / DC power adapter (220 VAC, 50/60 Hz)

Distributed By:

Eutech also provides meter accessories and calibration standards. Refer to separate brochures for information. Eutech Instruments warrants its meter free from manufacturing defects for 3 years and electrodes for 6 months.
The CyberScan series are registered under U.S. Patent #371,748. Patents outside U.S. are pending.
Note: We reserve the right to make changes, improvements and modifications to products shown.
BEN 08X233308 11/00 Rev 0
Eutech Instruments Pte Ltd
55, Ayer Rajah Crescent, #04-14/24, Singapore 139949 : (65) !: (65) : marketing@eutechinst.com
e: http://www.eutechinst.com
Eutech Instruments Europe B.V.
Mail Address : P.O.Box 254, 3860 AG Nijkerk Netherlands Visit Address : Wallerstraat 125K, 3862 CN Nijkerk Netherlands : (31) 33-2463887 !: (31) 33-2460832 : info@eutech.nl e: http://www.eutech.nl

CyberScan 2100,1100 & 510 Series

Bench Meters

pH Ion ORP Conductivity TDS

Corporate Profile

| Over 15 Years of Product Excellence | Eutech Instruments is a leading ISO9001-certified company established in 1990. Dedicated to the design and manufacture of sensor-based instruments for water quality analysis, Eutech is a pioneer in the development of ASIC-based (Application Specific Integrated Circuit) instruments, and is internationally recognised for its achievements in sensor technology, software programming and product design. Eutech has an extensive product line, which includes the worlds first Windows CE-driven colour touchscreen research-grade bench meter. | Commitment to R&D | Eutechs competitiveness comes from our strong commitment to R&D. This is backed by a dedicated team of scientists and engineers who thrives on meeting new technological challenges to simplify laboratory and field analytical procedures. The Eutech team is constantly driven to explore the latest technologies and applying them in our design and manufacture of advanced instruments. The result is a unique line of products that are accurate, consistent, reliable and easy to use. | Comprehensive Product Line | Eutechs constant drive for innovation is reason for our unique and expansive portfolio of microprocessor-based instruments and chemical sensor systems. We offer a comprehensive range of laboratory and field instruments for electrochemical and photometric water analysis. Eutech also manufactures continuous on-line process instruments for the monitoring and control of pH, Conductivity, Total Dissolved Solids (TDS), Redox Potential (ORP), Dissolved Oxygen (DO) and other water quality parameters. Eutech products range from compact pocket testers and portable meters to research-grade benchtop meters and industrial process controllers. Each product carries the signature Eutech intuitive design and is packed with advanced user-friendly features. | Customer Focus | Every Eutech innovation is conceptualised with the user in mind. This, coupled with our strategic location in the design and technology hub of Asia, has enabled the company to produce cutting edge instruments at competitive prices. Our consistent demonstration of insight into customer needs and product demands has earned the company consecutive Frost & Sullivan Market Engineering awards for Product Line Strategy. Driven by a successful Total Customer Satisfaction Program incorporated in the ISO9001:2000 Quality System, all products undergo extensive testing and calibration by a qualified team of technical experts. Stringent quality control measures guarantee consistency, durability and performance. Eutech products are certified to comply with various global testing standards. | Forging New Frontiers in Water Analysis | Underlying Eutechs objective to be a world leader in the field of water analysis instrumentation, the company adopts a proactive stand in anticipating the needs of the industry. With increasing global awareness and concern for water quality, the future provides new and exciting challenges and opportunities. To realize the potential of advanced water analytical technologies, Eutech will continue to forge close links and strategic alliances with research institutions, government agencies and private sector firms worldwide. These efforts support the Eutech mission to make advanced technology easy to use. | Global Reach | Eutech products are marketed in over seventy countries worldwide, through an extensive network of associate companies and distributors, with manufacturing facilities in Singapore and Malaysia. Eutech Instruments Singapore has a full-fledged value-chain operation which comprises R&D, manufacturing, marketing, customer service and logistics for worldwide support to customers. | Thermo Fisher Scientific | Eutech is now part of Thermo Fisher Scientific, the world leader in serving science. Thermo Fisher Scientific enables customers to make the world healthier, cleaner and safer by providing analytical instruments, equipment, reagents and consumables, software and services for research, analysis, discovery and diagnostics. With annual sales of more than $9 billion, Thermo Fisher Scientific has 30,000 employees and serves more than 350,000 customers in pharmaceutical and biotech companies, hospitals and clinical diagnostic labs, universities, research institutions and government agencies as well as environmental, industrial quality and process control settings.

Global Offices Asia Pacific (Head Office) | Eutech Instruments Pte Ltd
North & South America | OAKTON Instruments P.O. Box 5136, Vernon Hills,IL 60061, USA Tel: toll free 1-888-4OAKTON (1-888-462-5866) Fax: (1) 847-247-2984 www.4oakton.com
Blk 55, Ayer Rajah Crescent, #04-16/24, Singapore 139949 Tel: (65) 6778-6876 Fax: (65) 6773-0836 www.eutechinst.com
Europe | Eutech Instruments Europe B.V. P.O. Box 254, 3860 AG Nijkerk Netherlands Wallerstraat 125K, 3862 CN Nijkerk Netherlands Tel: (31) 033-2463887 Fax: (31) 033-2460832 www.eutech.nl Malaysia | Eutech Instruments Sdn Bhd No. 1, Lengkok Keluli 2, Bukit Raja Prime Industrial Park, 41050 Bukit Raja, Klang Selangor D.E., Malaysia Tel: (603) 3342-8533 Fax: (603) 3342-6520 www.eutechinst.com China | Eutech China Unit D, 20/F Longlife Mansion, No.1566 YanAn West Road, Shanghai 200052, China Tel: (86) 021-5109-5800 Fax (86) 021-5258-2508 www.eutech.cn India | Eutech India Unit No. 2013-2020, 2nd Floor, Oberoi Garden Estate, A Wing, Chandivali Farms Road, Chandivali, Sakinaka, Andheri (E), Mumbai 400 072, India Tel: (91) 2200 Fax: (91) 2244

p age | 02

Contents
Main Features CyberScan Bench pH 2100 & pH 1100 Meters CyberScan Bench Ion 510 & pH 510 Meters CyberScan Bench CON 510 & PC 510 Meters Accessories Ordering Information Specification Tables Specification & Comparison Tables >> 04 >> 05 >> 06 >> 07 >> 08 >> 09 >> 10 >> 11

page | 03

Features
User-Customisable Setup Customise meter to your needs
Easy To Use Dual-Line Display Analog Recorder Output
Non-Volatile Memory Detachable Electrode Holder 3-Year Warranty
Hold Function Holds reading for later reference
Multi-Electrode Holder More organised, less space occupied
Selectable ATC/MTC Compensates for electrode response under varying temperature for higher accuracy
Dual-Display LCD With self-diagnostic messages
Stability Indicator Prompts when reading has stabilised
Slide-Out Instruction Card For quick, convenient referencing
Splash-Proof Tactile Keypad Protects against incidental spills
Non-Skid Pads Hold meter steady during operation

p age | 04

CyberScan pH 2100
pH / Ion / ORP / Temperature Measure pH, mV, ORP, ion and temperature with one benchtop meter! The CyberScan pH 2100 features a backlit two-line screen that displays readings, time, date as well as user-friendly prompts for easy set-up and trouble-shooting. An RS232 output allows easy transfer of information out of meter. Choose to send your data to a computer/printer at the press of a button, or program your meter to perform data synchronizing at fixed timed intervals. Measures up to 3-digit resolution Analog recorder output for convenient documentation of results with any chart-recording device Quick, easy calibration with no mistakes up to 5-point push button calibration with auto-buffer recognition High/low set point alarms allows convenient monitoring within a designated range Selectable automatic/manual temperature compensation for optimum accuracy under varying temperatures Non-volatile memory stores up to 100 data sets Automatic datalogging with preset intervals

Applications: Water quality testing Sewage treatment Fertilizer testing Plant tissue testing Food processing (for HACCP compliance) Geological and ecological testing Metal plating Pharmaceutical industries Use with ORP to monitor plating operations, ozonation system efficiency and other redox measurements

Eutech CyberScan

Bench pH 2100 & pH 1100 Meters

CyberScan pH 1100

pH / ORP / Temperature Advanced features, high performance and optimal versatility on a user-friendly interface platform the pH 1100 measures with an accuracy of 0.002 pH at three-decimal resolution. Its inbuilt cal-due alarm runs on a real time clock to remind user of periodic calibrations. Meter comes with a backlit two-line dot matrix display which also shows last calibration status. Quick, easy calibration with no mistakes up to 5-point push button calibration High/low set point alarms allows convenient monitoring within a designated range Non-volatile memory stores up to 100 data sets Calculates electrode slope and offset automatically Automatic datalogging with preset intervals
Applications: Water quality testing Sewage treatment Fertilizer testing Plant tissue testing Food processing (for HACCP compliance) Geological and ecological testing Metal plating Pharmaceutical industries

page | 05

CyberScan Ion 510
Ion / pH / ORP / Temperature Versatile and economical, Eutechs CyberScan Ion 510 comes with a dual-line custom display that allows direct readouts of pH, ORP, ion concentration and temperature. With a range that covers up to 1999mV, the bench meter is flexible for use with a good variety of Ion Selective Electrodes in accordance with users needs. Measures up to 2-digit resolution Electrode output mode allows users to verify electrode performance while taking Ion measurements Quick, easy calibration with no mistakes up to 5 pH point push button calibration with auto-buffer recognition Analog recorder output for convenient documentation of results with any chart-recording device Non-volatile memory stores up to 100 data sets Packaged with two power adapters 110 VAC to 9 VDC and 220 VAC to 9 VDC
Applications: General use in laboratories Titration Quality assurance Ecological studies Food-processing

Bench Ion 510 & pH 510 Meters

CyberScan pH 510

pH / ORP / Temperature A Eutech favourite! the user-friendly pH 510 allows users to switch from pH to mV readings and comes with a pH and temperature probe for general-purpose measurements. Analog recorder output allows easy transfer of readings to external chart-recording devices and into hardcopies. The CyberScan pH 510 is value for money and ideal for routine use in schools, laboratories and production plants. Dual display shows pH (or mV) and temperature readings Quick, easy calibration with no mistakes up to 5-point push button calibration with auto-buffer recognition Non-volatile memory stores up to 100 data sets Packaged with two power adapters 110 VAC to 9 VDC and 220 VAC to 9 VDC

p age | 06

CyberScan CON 510
Conductivity / Total Dissolved Solids / Temperature The CyberScan CON 510 offers high precision and stability for years of reliable performance. With selectable cell constant and auto-ranging across 5 ranges, the CON 510 is an affordable bench meter that provides accurate, consistent measurement of conductivity. Adjustable TDS factor for more accurate results Quick, easy calibration with no mistakes up to 5-point push button calibration Single point or multi point calibration options Auto-ranging for fast response with high resolution Electrode comes with in-built ATC function, and is designed for minimal air bubble entrapment during measurement Non-volatile memory stores up to 50 data sets
Applications: Water quality testing Checking metal finishes Solutions Cooling tower water Printing fountain solutions Boiler water Brines Drilling mud Rinse tanks Ponds Pollution control Recirculating systems Waste water Industrial process systems
Bench CON 510 & PC 510 Meters

CyberScan PC 510

pH / ORP / Conductivity / Total Dissolved Solids / Temperature A real value-for-money, the CyberScan PC 510 offers measurements in pH, conductivity, TDS, and temperature, all in one single meter. Incorporating signature user-friendly features typical to the CyberScan 510 series, this multi-parameter meter is a must-have in your laboratory! Analog recorder output for convenient documentation of results with any chart-recording device Quick, easy calibration with no mistakes up to 5-point push button calibration with auto-buffer recognition Adjustable TDS factor for more accurate results Selectable automatic/manual temperature compensation for optimum accuracy under varying temperatures Electrode comes with in-built ATC function, and is designed for minimal air bubble entrapment during measurement

Applications: Water quality testing Checking metal finishes Solutions Cooling tower water Printing fountain solutions Boiler water Brines Drilling mud Rinse tanks Ponds Pollution control Recirculating systems Waste water Industrial process systems General use in laboratories Titration Quality assurance Ecological studies Food-processing

page | 07

Bench Accessories
| Electrode Holder with Swivel Arm | Electrode holder with swivel arm allows convenient hands-free operation. A weighted 6-inch diameter base gives you more flexibility with 360 pivoting of holder, while swivel arm allows you to move electrode from side to side or up and down while keeping electrodes at a constant vertical angle. Holds up to four standard size electrodes (14 mm diameter) and one ATC probe. | Electrodes | Eutech offers an extensive selection of epoxy and glass-body electrodes for a wide range of parameters and applications. Combination designs are convenient and require no separate sensing and reference half-cell electrodes. | Buffer & Calibration Solutions (480 ml) | Eutech buffers and calibration solutions are available in packs of 480 ml durable plastic bottles economical and convenient for laboratory use. (MSDS and COA can be downloaded under Support at http://www.eutechinst.com) | Calibration Sachets (20 x 20 ml Per Box) | Economical NIST traceable sachets offer quick, accurate and convenient calibration. Simply insert electrode into sachet pack, calibrate, rinse and discard sachet no separate container needed! | RS232 Printer | The convenience of printing directly from your meter whenever, wherever! This compact dot-matrix microprinter connects easily to your hand-held meters via an RS232C outlet ideal for data-recording and report-generation. Connecting cable included.
Electrode Handbook (Order No.: 08X233502)
Flexible Electrode Holder pH Buffer Sachets

pH Buffer Solutions

Electrodes

Microprinter

p age | 08

CyberScan Bench

Ordering Information
Order Code Part No. ECPH210042S 01X279003 ECPH210041S 01X279009 ECPH110042S 01X279006 ECPH110041S 01X279011 ECION51041S 01X263911 ECPH51042S 01X263318 ECPH51041S 01X263314 ECCON51043S 01X305204 ECPC51043S 01X270607 ECFG7350401B 93X218814 ECFC7252101B 01X099412 ECFC7252201B 01X099417 ECFC7960201B 01X256613 ECFE7352901B 93X218990 ECPH5TEMB01P 01X210303 ECCONSEN72W 93X244303 ECCONSEN73W 93X244306 ECCONSEN91W 01X244702 ECCA01M09F09 30X219401 ECPHELSTDC 01X081600 ECMICROPRNTR01 01X230001 ECMICROPRNTR02 01X230002 ECMICROPRNTR02CLK 01X230004 60X030111 60X030111 60X030112 60X030112 Description CyberScan pH 2100 with ECFG7350401B, ECPH5TEMB01P, Integral Electrode Holder ECDA2000 and ECCA01M09F09 CyberScan pH 2100 with ECPH5TEMB01P, Integral Electrode Holder ECDA2000 and ECCA01M09F09 CyberScan pH 1100 with ECFG7350401B, ECPH5TEMB01P, Integral Electrode Holder ECDA2000 and ECCA01M09F09 CyberScan pH 1100 with ECPH5TEMB01P, Integral Electrode Holder ECDA2000 and ECCA01M09F09 CyberScan Ion 510 with ECPH5TEMB01P and Integral Electrode Holder CyberScan pH 510 with ECFC7252101B, ECPH5TEMB01P and Integral Electrode Holder CyberScan pH 510 with ECPH5TEMB01P and Integral Electrode Holder CyberScan CON 510 with ECCONSEN91W and Integral Electrode Holder CyberScan PC 510 with ECFC7252201B, ECCONSEN91W and Integral Electrode Holder Glass-Body Refillable pH Combination Electrode (1 m Cable) Plastic-Body Gel-Sealed Single-Junction pH Combination Electrode (1 m Cable) Plastic-Body Gel-Sealed Double-Junction pH Combination Electrode (1 m Cable) Plastic-Body Gel-Sealed Double-Junction ORP Combination Electrode (1 m Cable) Plastic-Body 3-in-1 Gel-Sealed pH Combination Electrode with Built-In ATC (1 m Cable) Stainless Steel Temperature Probe (1 m Cable) 2 Platinum Rings Epoxy-Body Electrode with ATC, K=0.1 (1 m Cable) 2 Platinum Rings Epoxy-Body Electrode with ATC, K=10.0 (1 m Cable) 2 Stainless Steel Rings Ultem-Body Electrode with ATC, K=1.0 (1 m Cable) Custom RS232 Communication Cable (1 m Cable) Electrode Holder (Stand with Base Plate) Serial Impact Dot-Matrix, Paper-Roll Portable Printer with 120 VAC Power Adapter Provided Serial Impact Dot-Matrix, Paper-Roll Portable Printer with 220 VAC Power Adapter Provided Serial Impact Dot-Matrix, Paper-Roll Portable Printer with Built-In Real Time Clock, 220 VAC Power Adapter Provided AC/DC Power Adapter (120 VAC, 50/60 Hz), 2-Flat Pin, US Type AC/DC Power Adapter (220 VAC, 50/60 Hz), 2-Round Pin, Euro Type

Design of Eutechs bench meters are patented under the United States Patent Law, patent number: 371 748. Patent rights in other areas are pending.

page | 09

Specification Tables
Eutech reserves the right to make changes, improvements and modifications to products shown. pH 2100 pH 1100
| Warranty | Eutech Instruments provides three years warranty against manufacturing defects for its meters, and six months for its electrodes.

Ion 510 pH 510

pH/Ion Bench Meters
Range Resolution Accuracy - 1.000 to 14.000 pH 0.01, 0.001 pH (User selectable) 0.01, 0.002 pH USA: pH 1.68, 4.01, 7.00, 10.01, 12.45 NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45 User 1: pH 1.68, 4.01, 7.00, 9.18, 12.45 User 2: pH 1.68, 4.01, 6.86, 10.01, 12.45 Custom: Min. of 2 and max. of 5 points 1 to 5 Points -1850.0 to +1850.0 mV 0.1 mV -2000 to +2000 mV 0.1 mV (199.9 mV) 1 mV (Beyond 200 mV) 0.2 mV (199.9 mV) 2 mV (Beyond 200 mV) 0.01 to 1999 ppm 0.01 ppm (0.01 to 0.99 ppm) 0.1 ppm (1.0 to 199.9 ppm) 1 ppm (200 to 1999 ppm) 0.5 % Full scale (monovalent) 1 % Full scale (divalent) 3 Points 0.0 to 100.0 C 0.1 C 0.3 C Yes (0 to 100 C) CON 510 0.00 to 14.00 pH 0.01 pH 0.01 pH + 1 LSD

pH Buffer Option

USA: pH 1.68, 4.01, 7.00, 10.01, 12.45 NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45
Calibration Range Resolution mV Accuracy Range
0.2 mV 0.001 to 19999 0.001 ppm (0.000 to 0.999 ppm) 0.01 ppm (1.00 to 9.99 ppm) 0.1 ppm (10.0 to 99.9 ppm) 1 ppm (100 to 19999 ppm)

Resolution Ion

Accuracy Calibration Range Resolution Accuracy ATC

Temperature

0.5 % Full scale (monovalent) 1 % Full scale (divalent) 5 Points -5.0 to 105.0 C / 23.0 to 221.0 F 0.1 C / 0.1 F 0.3 C / 0.5 F

Conductivity Bench Meter

Range Resolution Accuracy Calibration Range Resolution Accuracy Calibration Range Resolution Accuracy ATC. to 19.99, 199.9, 1999 S/cm ; 19.99, 199.9 mS/cm 0.01, 0.1, 1 S/cm ; 0.01, 0.1 mS/cm 1 % Full scale + 1 digit Up to 4 points (auto calibration), up to 5 points (manual). to 9.99, 99.9, 999 ppm ; 9.99, 99.9 ppt (Max. of 199.9 based on factor setting) 0.01, 0.1, 1 ppm ; 0.01, 0.1 ppt 1 % Full scale + 1 digit 5 Points (1 per range) - 10.0 to 110.0 C / 14.0 to 230.0 F (Meter) 0.1 C / 0.1 F 0.5 C ( 0.9 F) Yes (0 to 80 C)

Conductivity

p age | 10

PC 510

Multi-Parameter Bench Meter
Range Resolution Accuracy Buffer Option Calibration Range Resolution Accuracy Range Resolution Accuracy Calibration Range Resolution Accuracy Calibration Range Resolution Accuracy ATC -2.00 to +16.00 pH 0.01 pH 0.01 pH USA: pH 1.68, 4.01, 7.00, 10.01, 12.45 ; NIST: pH 1.68, 4.01, 6.86, 9.18, 12.45 Up to 5 points -600 to 600 mV 0.1 mV (199.9 mV) ; 1 mV (beyond 200 mV) 0.2 mV (199.9 mV) ; 2 mV (beyond 200 mV). to 19.99, 199.9, 1999 S/cm ; 19.99, 199.9 mS/cm 0.01, 0.1, 1 S/cm ; 0.01, 0.1 mS/cm 1 % Full scale + 1 digit Up to 4 points (auto calibration), up to 5 points (manual). to 9.99, 99.9, 999 ppm ; 9.99, 99.9 ppt (Max. of 199.9 based on factor setting) 0.01, 0.1, 1 ppm ; 0.01, 0.1 ppt 1 % Full scale + 1 digit 5 Points (1 per range) - 10.0 to 110.0 C / 14.0 to 230.0 F (Meter) 0.1 C / 0.1 F 0.5 C ( 0.9 F) Yes (0 to 100 C)

Comparison Tables

pH 2100 pH 1100 Ion 510 pH 510 CON 510 PC 510

Meter Features

pH Slope & Offset Display Normalization Temperature Temperature Coefficient Cell Constant Auto-Ranging Stability Indicator Hold Function Date & Time Display Built-In Electrode Arm Memory Output Input Power Requirements Dimension ; Weight Meter: 23 (L) x 18 (B) x 6.3 (H) cm ; 850 g Boxed: 40 (L) x 26 (B) x 9 (H) cm ; 1400 g Yes Yes Yes Yes Dot matrix dual-display Yes 100 Data sets RS232 (via cable), recorder (1800 mV) BNC, phono (ATC) 9 V DC adapter for 120 VAC or 220 VAC, 500 mA Meter: 23 (L) x 18 (B) x 6 (H) cm ; 750 g Boxed: 40 (L) x 26 (B) x 9 (H) cm ; 1400 g 50 Data sets Recorder (2000 mV) BNC, 6 Pin connector (for COND/TDS & Temp) 6 Pin round connector Meter: 23 (L) x 18 (B) x 6.3 (H) cm ; 750 g Boxed: 40 (L) x 26 (B) x 9 (H) cm ; 1400 g Custom dual-display LCD 15.0 to 30.0 C (Adjustable) 0.0 to 10.0 % per C 0.1, 1.0, 10.00 1.0 Yes
<< Sewage Treatment >> Geological & Ecological Testing
<< Pharmaceutical Industries >> Cooling Tower

page | 11

Eutech Instruments manufactures a comprehensive range of laboratory and field instrumentation for water analysis. Eutech Instruments also produces on-line process instruments for water quality monitoring and control. Innovative products from Eutech include:
| World-Wide Sales and Service Support | Eutech provides world-wide sales and service support for all its products through its network of international distributors. Contact us at marketing@eutechinst.com for details of your nearest distributor.

Distributed by:

BEN 08X233399 12/06 Rev 5
Part of Thermo Fisher Scientific Inc.
Awarded in 2001 & & 2007