FAGOR 8025 CNC

The Fagor 8025 is a compact CNC designed to control all kinds of machine-tools of 1 to 5 axes (Milling machines, Machining Centers, Lathes and Turning Centers, general purpose applications grinders, Laser lines, etc.) with an optimum features/cost ratio.

Inputs/Outputs

FEEDBACK INPUTS

Configuration:

The Fagor 8025 CNC integrates, in a single module, the following elements: Central control unit, with an optional INTEGRATED PLC (PLCI). Monitor/Keyboard/Operator Panel to display data and operate the CNC. It consists of:
inputs, for up to 4 axes (5 on the 8025MS model) and, optionally: Spindle encoder Electronic handwheel C axis, synchronized live tool (on the 8025TS model) 6 ( 10V) for axes, spindle, live tool, laser beam intensity control, controlled turret. 55 V TTL 24 V Vdc 41 inputs/24 outputs signals: x1, x2 and x4 signals: x1, x2, x5, x10
- 8 Monochrome monitor. - Full alphanumeric keyboard. - Function softkeys. - Integrated Operator Panel.

ANALOG OUTPUTS

PROBE INPUT DIGITAL INPUTS/ OUTPUTS FEEDBACK PULSE MULTIPLIER

Sinewave

FAGOR 8025 M/MG/MS CNC
For Milling Machines and Machining Centers.
NUMBER OF AXES COORDINATES/AXES SYSTEMS SPINDLE INTERPOLATION

FAGOR 8025 GP CNC

For General Purpose.
4 (models 8025M/8025MG) 5 (8025MS model)
4 Slaving of the 4th , 5th axis with its associated axis Polar origin preset Spindle orientation M19
Slaving of the 4th , 5th axis with its associated axis Polar origin preset

Spindle orientation M19

Linear: 3D Circular: 2D Helical Tool radius, length and wear (up to 98 tools) Leadscrew error compensation Cross compensation
Linear: 3D Circular: 2D (up to 4 axes) Helical

COMPENSATIONS

COMPENSATIONS DISPLAY OF WORK FEEDRATE PROGRAMMING
Tool length (up to 98 tools) In mm/min. or inches/min.
DISPLAY OF WORK FEEDRATE GRAPHICS (MODELS 8025MG AND 8025MS) CANNED CYCLES
In mm/min. or in inches/min. Path simulation (in 2D and in 3D) Zoom to reduce/enlarge the part or portions of it
Mirror image Zero offsets, pattern rotation User defined canned cycles

CONTROL IN OPEN LOOP

Up to four axes with signals for each axis (fast, slow, direction, brake and in position)
Drilling Threading (electronic, tapping, rigid tapping) Boring/reaming Pocket (rectangular and circular) User defined cycle

PROGRAMMING

Mirror image Zero offsets, pattern rotation Graphic programming assistance Automatic block generation (8025MS model)

DIGITIZING

Canned cycles for probing (8025MS model), tool calibration; measuring a surface, an angle, an inside or outside corner, a hole/boss, etc.

FAGOR 8025 T/TG/TS CNC

For Lathes and Turning Centers.
NUMBER OF AXES C AXIS COORDINATES/AXES SYSTEMS SPINDLE INTERPOLATION
4 (standard) Available on the 8025TS model Polar origin preset Spindle orientation M19 Linear: - Up to 3 axes simultaneously - Model 8025TS: 3D (XZC) Circular: - 2D (XZ) - Model 8025TS: 2D (XZ-XC-ZC) Tool radius and wear (up to 32 tools) Current tool dimension correction Leadscrew error compensation Constant Surface Speed (CSS) In mm/min. or in inches/min. S speed in rpm Path simulation Zoom to reduce/enlarge the part or portions of it Pattern repeat Roughing (along X, along Z) Turning (of a straight section, of an arc) Facing (in a straight section, in an arc) Deep hole drilling Threading (longitudinal, taper, on the face) Grooving along X and Z Zero offsets Graphic programming assistance Automatic block generation (8025TS model) Canned cycles for probing (8025TS model): Calibration, part measuring (X, Z) and tool correction (X, Z)
OPERATION IN JOG MODE AND IN AUTOMATIC DISPLAY OF WORK FEEDRATE GRAPHICS (MODELS TG Y TS) CANNED CYCLES

Technical Description

General characteristics
RESOLUTION BY MACHINE PARAMETER FEEDRATE COMPENSATIONS

Operation

DATA ENTRY
1, 2, 5 and 10 m (0.0001, 0.0002, 0.0005 and 0.001 inch) In mm/minute In mm/revolution

Manual data entry via keyboard Dialog with the operator for data entry (conversational data entry)
Leadscrew backlash (up to 255 m) Leadscrew pitch error: 30 pairs per axis (60 pairs for X, Y)
MANUAL AND AUTOMATIC OPERATION
LANGUAGES MONITOR COMMUNICATIONS
Software in Spanish, English, German, Italian, French, Portuguese and Chinese 8 amber CRT SIMULATION/EXECUTION
Two serial lines of up to 9600 baud: RS 232C (24V) RS 485 DNC channel, via RS-232C, to: Upload/download programs, tables, parameters, etc. Keystroke simulation Infinite program execution LAN: RS 485 Interface to connect the CNC with one or several PLCs, CNCs, etc.
Jog with electronic handwheel JOG Panel with keys for jogging the axes in continuous and incremental modes Feedrate Override switch ranging from 0% to 120% Spindle speed override between 50% and 120% Home search (incremental or distance-coded reference marks) Zero offsets (datum points)
Single block/continuous cycle Display of the axes position and their following error (lag) Display of parameter values, execution time and parts counter Tool inspection during program execution

Diagnostics

ERROR MANAGEMENT Errors in: programming, execution, internal hardware and over-temperature (with texts) Feedback and communication errors Activation of external emergencies Machine travel limits (by software)

MONITORING

Inputs/outputs status Of the integrated PLC
CNC language editing (ISO) Teach-in mode editing (by executing the block before storing it in memory) Editing in play-back mode (self-teaching) Geometric programming assistance (tangency, chamfers, square/round corner) Machining canned cycles in all planes User defined canned cycles Scaling factor Memory capacity for about 250 part-programs Up to 99 subroutines (standard, parametric and modal) which may be repeated up to 99 times Part digitizing (8025MS and 8025TS models)
DECODED M FUNCTIONS TABLES
Up to 99 BCD coded or 255 binary coded M functions may be accessed through parameters.
Dimensions in mm (inches)
8.5 (0.33) 40 (1.57) 273 (10.74) 193 (7.59) 352 (13.85) 335 (13.18) 8.5 (0.33) 6 (0.23)
Tool dimensions Up to 7 zero offsets 255 arithmetic parameters

INTEGRATED PLC

Optional integrated PLC (available for all models) PLC program file in non-volatile memory
40 (1.57) 320 width x 265 height (12.59 x 10.43) 100 (3.93)

197 (7.75) 222 (8.74)

Fagor Automation S.Coop.
B San Andrs s/n, Apdo. 144 E-20500 Arrasate-Mondragn, Spain Tel. 34-Fax 34-E-mail: info@fagorautomation.es
www.fagorautomation.mcc.es
Fagor Automation, Catalunya (Barcelona-Spain) Tel. 34-- Fax 34-Fagor Industriecommerz GmbH (Gppingen-Germany) Tel. 49-716120040 - Fax 49-716113327 Fagor Italia S.R.L. (Milano-Italy) Tel. 39-0295301290 - Fax 39-0295301298 Fagor Automation Ltda.Suc.Portuguesa (Lea da Palmeira-PO) Tel. 351-2-9968865 - Fax 351-2-9960719 Fagor Automation UK Ltd. (West Midlands-UK) Tel. 44-1384-572550 - Fax 44-1384-572025 Fagor Automation Suisse S. r.l. (Renan-Switzerland) Tel. 41-329631863 - Fax 41-329631864 Fagor Automation Systmes (Clermont Ferrand-France) Tel. 33-473277916 - Fax 33-473280538 Fagor Automation (Asia) Ltd. (Hong Kong) Tel. 852-23891663 - Fax 852-23895086 Fagor Automation (Asia) Ltd., Twn Branch (H.K.) (Taiwan) Tel. 886-4-3271282 - Fax 886-4-3271283

With Total Solutions

To Automate and Control your Machine-Tool.
Fagor Automation offers a wide range of servo systems (motor+drive) adapted to the particular requirements of your machine. These servo systems, together with the Fagor 8025 CNCs complete a full package meeting the technological requirements of the current Machine-Tool.
Fagor Automation (S) Pte. Ltd. (Singapore) Tel 65-8417345 - Fax 65-8417348 Beijing Fagor Automation Equipment Co.,Ltd. Office and Service Centre (China) Tel. 86-10-64641951 - Fax 86-10-64641954 Beijing Fagor Automation Equipment Ltd. Nanjing Office (China) Tel. 86-25-3328259 - Fax 86-25-3328260 Beijing Fagor Automation Equipment Co.,Ltd. Guangzhou Rep. Office (China) Tel. 86-20-86553124 - Fax 86-20-86553124
FAGOR Digital Servo Systems
The Fagor servo drive family is completed with a wide spectrum of synchronous brushless AC motors and asynchronous motors. Fully digital servo drive system Brushless AC Servomotors for axes: from 0.63 Nm to 50 Nm (0.71 in lb to 5.65 in lb) Induction AC motors for spindles: from 2.2 Kw to 30 Kw (3 HP to 40 HP) in S1.
Fagor Automation Korea, Ltd. (Seoul-Korea) Tel. 82-2-36652923 - Fax 82-2-36652925 Fagor Automation do Brasil Com.Imp.Exp.Ltda. (Brazil) Tel. 55-11-51841414 - Fax 55-11-51819898 Fagor Automation Corp. (Chicago-USA) Tel. 1-847-9811500 - Fax 1-847-9811311 Fagor Automation West Coast (CA-USA) Tel. 1-714-9579885 - Fax 1-714-9579892 Fagor Automation East Coast (New Jersey-USA) Tel. 1-973-7733525 - Fax 1-973-7733526
G2C DV 8025 - IN - A.G. Elkar D.L. BI-1492-99
Fagor Automation Ontario (Mississauga-Canada) Tel. 1-905-6707448 - Fax 1-905-6707449 Fagor Automation Quebec (Montreal-Canada) Tel. 1-450-2270588 - Fax 1-450-2276132
Fagor DC Servo Drive systems
A compact and profitable DC servo drive system:

Fagor Fagor

DC Servo drives: Compact drive with integrated power supply.
DC Motors (DCM): for applications needing between 1 Nm and 12 Nm, (between 0.11 in lb and 1.35 in lb) offering high torque and easy control of speeds between 1200 rpm and 4000 rpm.
Fagor Automation holds the ISO 9001 Company certificate and all its products carry the seal.

MONDRAGON

CORPORACION COOPERATIVA

Worldwide reliability

Fagor shall not be held responsible of any printing errors in this catalog and reserves the right to make any changes without prior notice.