Fagor Electrnica

General index
Presentation Signal Reception.
Terrestrial antennas. Satellite dishes. Converters. 1st IF SAT Line Amplifier Mechanical accessories.

Distribution. 9

Tap-offs and splitters. Outlet sockets. 1st IF SAT line amplifier. Shielded diplexer. Equalizers. Coaxial cables.

Accessories. 105 31

Filters. Combiners. Attenuators. Coaxial bridge. Connectors,.

Headends.

Multi-Processing system. Compact headend QPSK-AM. NEXUM system. MICROMATV system. Band and Distribution amplifiers.
Technical Notes. 111 Product Index. 119 81
Mast and Indoor Amplifiers.
Mast band amplifiers. Power supplies. Indoor amplifiers. Modulators.
European company that develops and manufactures electronic components. Its main plant is located in Mondragn (Guipzcoa) and the company operates commercially in the five continents. The company is divided into 3 different business units: Semiconductors Signal Processing: TV Reception Systems Home Automation Wireless Communications Electronic Manufacturing Services.
Backed by a leading group
Fagor Electrnica is part of the Mondragon Corporacion Cooperativa (MCC), one of the most important business groups in Spain, whose business structure is divided into three groups: Financial, Industrial and Distribution, which operate independently within the framework of a joint strategy.

40 years of Innovation

Fagor Electrnica is a dynamic company, in continuous evolution, pioneer in the development of the 1st Programmable Terrestrial TV Headend and in developing systems which apply a new concept such as the MULTI-PROCESSING range of products.

Work team

Fagor Electrnica has a human potential with the knowledge and experience necessary to successfully take on the key challenges of the future, in accordance with the adaptation which the competitive market demands at present.

Quality as our strategy

At Fagor Electrnica, Quality Management is a top strategic consideration, as this is what lays the foundations of sound, competitive development. FAGOR, the first company to obtain the ISO 9001 certification, in 1993, and more recently the ISO 14001 environmental certification.
Covered by a wide network
Fagor Electrnica's customers have the support of a vast commercial network, all over the world to ensure excellente service wherever you are.

Signal Reception

complete range of products to ensure optimum reception of terrestrial and satellite TV broadcasts, including antennas, satellite dishes, mechanical accessories, converters,.
Terrestrial antennas AN BI - AN BIII Series.. FM-DAB Series.. FAN Series... Di@na G 69 Series.. Dipole... Min@ Series... Digit Series.. Satellite dishes PO Series... Satellite dish + LNB kits... Converters LNB Series... 1st IF SAT Line Amplifier AL 46 Series.. Mechanical accessories Supports... Towers... Masts... Clamps... Brackets... Application examples..

SIGNAL RECEPTION

TERRESTRIAL TV ANTENNAS

AN BI Series

3-elements BI single channel antenna. Supplied in common packaging with individual protection bag.

APPLICATION

Terrestrial TV installations, community and individual.

CHARACTERISTICS

Robust, strong antenna, made of aluminium.
MODEL Reference Channels Gain Impedance Front-to-back ratio Horizontal operating angle Windload Return losses Packing dimensions Weight (4 u.) 130 km/h 150 km/h
AN03-E03 dB dB <H ) V N dB 68,>x 505 x >112

AN03-E04

(4 u.)

AN BIII Series

7-elements BI channel antenna. Supplied in common packaging with individual protection bag.
MODEL Reference Channels Gain Impedance Front-to-back ratio Horizontal opening angle Windload Return losses Packing dimensions Weight (4 u.) (4 u.) 130 km/h 150 km/h dB <H ) V N dB mm Kg dB

dBV dBc dBc dB KHz KHz KHz % mm Kg
(adjustable) 10 4,5 ( = 125 KHz) 75.x 166 x 45 1,7
MULTI - PROCESSING SYSTEM STEREO RECEIVER - MODULATOR
SRM 6000+ ST / SRM 7000+ ST
Analogue Satellite TV Stereo Receiver Modulator. The SRM 6000+ST / SRM 7000+ST module has the same basic specifications as the SRM 6000+ / SRM 7000+ models, adding the STEREO/DUAL signal processing. The receiver processes MONO, DUAL, or STEREO signals and its modulator delivers them at the output as MONO, DUAL or STEREO signals.
In DUAL mode A/B or B/A channel switching is provided. Includes independent processing of audio carriers with PANDAcompatible adaptive de-emphasis. The direct connection between the LNB and the receiver and the possibility of a splitting function at the input allows a very simple set-up. The modulator operates in any TV channel (BI, BIII, S Bands and UHF) and its VSB output allows adjacent channel operation. The output auto-combining system and the signal of high spectral purity allows broad band amplification. It also offers the possibility of fine tuning the output channel frequency to disperse intermodulation products in installations with many channels. RF output signal ON/OFF switchable for analysis and headend adjustment. Brightness adjustment available. Video modulation depth adjustable from 75 to 90%.
Supply voltage Current drawn (8,10 W)

12 470

Incorporates test bars generator. Screws and power supply cable included. It allows to generate black screen for distributing audio signals.
SRM 6000+ST 27675 Frame F (f) SRM 7000+ST Rack (dBm) 1,5 <8 18/27 (switchable) 5 4,mono: single subcarrier Stereo: double subcarrier ( 180 KHz) 150 / 330 / PANDA compatible 50s / J 17 / PANDA adaptive (75s) CCIR (Curve B / RC 405.1) E2. 69 (programmable)
MODEL Reference Assembly system Input/output connectors 1st IF input frequency Input level 1st IF through losses Dynamic threshold S / N 2nd IF bandwidth AFC pulling range Audio tuning band Audio modes IF audio bandwidth Audio de-emphasis Video de-emphasis VSB output channel Output level Spurious in channel Spurious in band C/N ratio (8 modules) Carrier accuracy Carrier stability Output fine tuning Video modulation depth TV standard Audio output modes Packing dimensions Weight mm Kg dBV dBc dBc dB KHz KHz dB % KHz MHz dBV dB dB MHz MHz MHz

(adjustable) 10 4,5 ( = 125 KHz) 75.90 B/G Mono / Stereo / Dual switchable (A/B - B/A) 272 x 166 x 45 1,7
MULTI - PROCESSING SYSTEM VSB MODULATOR

SM 6000+ / SM 7000+

Modulator with VSB output, that allows adjacent channel operation. A programmable output channel means that the modulator can easily be inserted into the headend since it operates in any TV channel (BI, BIII, S Bands and UHF).
Analogue satellite TV community installations, where locally produced channels insertion is needed.
It allows audio volume adjustment to equalise them to the level of other installed programs. It also offers the possibility of fine tuning the output channel frequency to disperse intermodulation products in installations with many channels. RF output signal ON/OFF switchable for analysis and headend adjustment. Brightness adjustment available. Video modulation depth adjustable from 75 to 90%. Incorporates test bars generator. Output frequency shift. Screws and power supply cable included.
Supply voltage Current drawn (6,2 W)

12 320

MODEL * Reference Assembly system Input/output connector Audio/Video input connector Audio pre-emphasis Video input level Audio input level VSB output channel Output level Spurious in channel Spurious in band C/N ratio (8 modules) Carrier accuracy Carrier stability Output fine tuning Video modulation depth (switchable) Pv / Ps ratio adjustable Packing dimensions Weight
SM 6000+ 19650 Frame F (f) MINI DIN 5 ways (f) s Vpp Vpp MHz dBV dBc dBc dB KHz KHz MHz % dB mm Kg 50 0,9 1,25 / 75 0,5 2,5 ( = 13 KHz) / 10 K (adjustable) 60 > 4,5 ( = 125 KHz) 85 + 5, 10 ( = 5%) 13 + 1, 2 ( = 1 dB) 272 x 166 x 45 1,5

SM 7000+ Rack

@ 1KHz

E2. 69 (programmable)

MULTI - PROCESSING SYSTEM VSB STEREO MODULATOR
SM 6000+ ST / SM 7000+ ST
Modulator with VSB output, that allows adjacent channel operation. It has 2 audio carriers for processing STEREO or DUAL signals. A programmable output channel means that the modulator can easily be inserted into the headend since it operates in any TV channel (BI, BIII, S Bands and UHF).

Supply voltage Current drawn (7,3 W) Operating temperature range

12 450

MODELO Reference Assembly system Input/output connectors Input frequency Input fine tuning Input level AGC C / N for 8 modules Output level adjustable VSB output frequency Phase noise Output fine tuning Spurious in band Carrier accuracy Carrier stability Output level stability Channel flatness Image frequency rejection Input channel rejection at output Through losses at input Through losses at output Adjacent channel rejection Packing dimensions Weight MHz dBc KHz KHz dB dB dB dB dB dB dB mm Kg MHz MHz dBV dB dB dBV
CIF 6000+ A/D 06426 Frame F (f) 47 862

CIF 7000+ A/D Rack

4,5 ( = 125 KHz Analog; 166 KHz Digital) Analog; Digital >(input >75 dBV Analog) 83 dBc / Hz @ 10 KHz 102 dBc / Hz @ 100 KHz 4,5 ( = 125 KHz Analog; 166 KHz Digital) 1,5 (47 862) >x 166 x 45 1,(input >65 dBV Digital) Analog; Digital
MULTI - PROCESSING SYSTEM QPSK / QAM TRANSMODULATOR

SDT 6000 N / SDT 7000 N

Transparent digital transmodulator that converts the QPSK signal coming from the satellite into channels with QAM 16/32/64/128/256 modulation for its distribution together with the rest of the terrestrial and analogue satellite channels through just one cable.
VHF/UHF distribution SMATV installations, new or existing, equipped with an extraordinary digital satellite-transmitted TV programme capacity.
Adjacent channel operation. No need of input splitters or output combiners Displays BER, Bit Error Rate, for accurate measuring of installation margin. Easy programming of the output channel by UCF 100 Control Unit. Screws and power supply cable included.
Supply voltage Current drawn (8,5 W)

12 330

MODEL Reference Assembly system Input / output connectors Input frequency LNB powering Modulation type Input level Input through losses AFT pulling range IF band QPSK Baud Rate Code rate (automatic) FEC (Reed Solomon) Deinterleaving Descrambling QAM modulation type FEC (Reed Solomon) Scrambling Interleaving Base band shaping (Roll-off) Spectrum Inversion QAM Baud Rate MER Output frequency range Output through losses Output level C/N ratio Output spurious Phase noise Packing dimensions Weight Mbaud dB MHz dB dBV dB dB dB/Hz mm Kg Mbaud dBV dB MHz MHz V

Ref. 39570 Ref. 39204 Ref. 69023 Ref. 84034 Ref. 84011
PROGRAMMABLE SELECTIVE AMPLIFIER
MicroMATV futura C Series
With Automatic Gain Control
Universal Amplification System for headends with 10 UHF filtering modules, with a programmable width of 1 - 6 channels, in addition to VHF and FM signals.
Designed for medium-sized analogue and digital terrestrial TV headend community installations and individual installations. Can receive signals from up to 5 antennas, allowing the system to be organised in accordance with the number of channels picked up by each.
AES function: system which automatically regulates the input signals, guaranteeing a balanced output signal simplifying adjustment as much as possible. Manual adjustment option. AGC function: a system that sets the output level for all active channels, irrespective of the variation in adjacent channels. It is the only programmable amplifier to offer these characteristics (Patent Pending). Automatic recognition of channel type: digital or analogue and identifies empty and occupied channels. Easily programmable with the UCF 200 control unit, using a simple and intuitive menu. With memory to clone up to 8 different configurations and programme using a single MicroMATV key. It incorporates amplification of 1st IF SAT. Auxiliary input for channels processed by other equipment. Immune to broadcasts from other services like GSM, UMTS,. Chassis totally made of Zamak. Incorporates RS 232 Serial port for firmware upgrading. Supply to pre-amplifiers at UHF1/UHF2 (12 V) inputs.
Consumption Supply to LNBs Supply to pre-amplifiers/mast ampli. Supply to pre-amplifiers UHF1/UHF2 inputs Mains supply Working temperature
35 W 0V/13V/17V/0Hz/22KHz, 300mA 24V/100mA 12V/30mA 230V 15% 0-50 C
INPUTS Band Bandwidth Number of amplifiers Filter width Configuration of number of amplifiers per input Gain (2) IN Regululation OUT Regulation AGC (Automatic Gain Control) Selectivity 20 MHz Noise figure analogue Operational input level digital Decoupling between inputs OUTPUTS MODEL Reference Number of outputs Band Bandwidth Output level IM3 DIN45004B (4) Packing dimensions Weight MHz dBV mm Kg MicroMATV futura 100 C RF 4,5
(3).- Fixed 8 dB slope between begin and end of band. (4).- IM3 -60 dBc for TV PAL and -35 dBc for FM, DAB, 1ST IF SAT and TDT (COFDM).

FM MHz 87,5108 1

BI 4768 1

BIII/DAB Fixed No

UHF1 470862

*FM: DIN 45004B (30 dB).

MICROMATV
1.BI / BIII dB dB dB dB dB dBV BI BIII UHF BI BIII UHF dBV dBV dBV MHz dB dBV dBV dBV UHF - UHF UHF - VHF /FM dB mA mm Kg / 25 5,UHF FM 1 FM BI / BIII / 25
2.UHF FM 1 FM 5,>30 >345 x 280 x BI/BIII BIII 25 / 25 3

5.UHF FM 1 FM 5,6 101

47 - 68; 130 - 862

MICROMATV plus N Series

Universal amplification system capable of independently processing up to 10 TV channels (UHF and VHF), as well as the FM signal. This programmable amplification system allows UHF filters to function in either single or dual channel mode, which makes it an excellent solution for future digital terrestrial TV transmissions. In addition to its frequency flexibility, each of the MicroMATV plus Ns UHF channels can be programmed in either single or dual channel mode, in installation itself.
Designed for community headend installations of digital terrestrial TV.
Easy to programme through an external Control Unit, UCF 100. All functions are automatically memorised and controlled by a FAGOR Microprocessor. Includes a visual level indicator. The amplifier has a 24V output and an auxiliary TV signal input.

230 Vac 15 + 10 % 21 W C

MODEL Reference Number of inputs Number of channels (filters) Gain Independent regulation per channel General regulation Selectivity ( 24 MHz) Noise figure (typ.) Max. input level Min input level for S/N >45 dB (opt. picture quality) Operating input level (automatic equalization AES) Auxiliary TV input level Auxiliary TV input frequency range Auxiliary TV input gain Output level DIN 45004B (60 dB)* IM2 (-60 dB) Output level: 10 channels Isolation between inputs 24 Vdc output Packing dimensions Weight

plus N

1.BI / BIII dB dB dB dB dB dBV BI BIII UHF BI BIII UHF dBV dBV dBV MHz dB dBV dBV dBV UHF - UHF UHF - VHF /FM dB mA mm Kg / 20 5,UHF (9) FM 1 FM 47 68; >30 >345 x 280 x BI / BIII / 20
2.UHF (8) FM 1 FM 5,6 101
Universal amplification system capable of independently amplifying and regulating 8 UHF channels as well as to process VHF and FM signals.
Easy to programme. Keyboard selection with digital display allows any combination of UHF channels, processing them completely independently. All functions are automatically memorized by a FAGOR microprocessor. The channels can be reprogrammed. Designed to provide maximum versatility, it is easy to expand and can be adapted to receive new channels in the future. The UHF, VHF split amplifier guarantees IM2 free operation. Includes an Output Level Meter, making the use of any additional equipment unnecessary. The SAB 252 amplifier is specially designed for use as a MicroMATV output amplifier.

220 Vac 10 % 10 W / 10 W C
MODEL Reference Number of inputs Frequency range Number of channels Gain Independent regulation per channel Regulation Selectivity ( 20 MHz) Noise figure (typ.) Max. input level Min. input level S/N 30 dB Input level for S/N<45 dB (opt. picture quality) Output level DIN 45004B (60dB) Output level for 8 channels (UHF) Isolation between inputs Packing dimensions Weight UHF - UHF UHF - VHF / FM dB dB dB dB dB dBV dBV dBV dBV dBV dB mm Kg BI - BIII > 51 106
SAB FM 1 87,FM 3 x 125 x 62 0,1 87,862 25
35491 UHF >20 3,36 > >30 >x 270 x 92 2,6
Designed for community headend installations of terrestrial TV in medium to individual sized installations. The ideal solution for dealing with different signal levels. Suitable for installations located in medium or low signals areas. The unit is designed to receive signals coming from two UHF antennas. The system can be configured according to the number of channels picked up by each antenna.
BAND AND DISTRIBUTION AMPLIFIERS

SAB Series

Band amplification system with separate VHF and UHF signal processing, to reduce the IM2 products.
The different models in the SAB series cover a wide range of applications: SAB 401/SAB 402can be used as a distribution amplifier, or an extension amplifier for collectives. SAB 401 is designed for working in high temperature environments. SAB 304/SAB 404, suitable for use as a band amplifier for communities. SAB 301/SAB 301-A, broadband amplifiers which allow a complete processing of all TV channels, from 47 to 862 MHz. They can also be used as final amplifier in CATV network.
The circuit is housed in a single-part metal case which includes all the input-output connectors. It has shielding at the top and bottom. High level of mechanical rigidity and complete protection against electrical interference.
Supply voltage Current drawn Operating temperature range 230 Vac 10 % +15% 10 VA C
MODEL Reference Number of inputs Band coverage Output level DIN 45004B (60 dB) Gain Input and output impedance Noise figure Regulation Tilt regulation Return path covered band Return path insertion losses Packing dimensions Weight
* BIII : 132 - 300 MHz (S 05 - S 20) ** With + 24 V (20 mA) auxiliary output

SAB 401** 35415 1

SAB 1 BI, FM, BIII*, UHF 117 40, 33, 40, 7, 7, 7,

SAB 862 MHz 12.3,5

Operating temperature Packing dimensions Weight
0-40 C 330 x 220 x 70 1,4 kg.
Tedi AC 175~240V; 50/60Hz 8 W MAX. 50 mA
Reference POWER SUPPLY Power supply voltage Consumption Max. Current +5Vdc HARDWARE Tuner Input impedance RF input connector RF output connector Input frequency Input levels Connector TV SCART connector VCR SCART connector: RCA outputs 9 Pin Sub-D (male): SYSTEM Constellation Transmission mode FEC Guard interval Transport Stream Input Rate Video Resolution Video Format MPEG decoder Audio Mode Video output impedance Video output level Audio output impedance: Audio output level:
75 Ohm IEC female, 9,5 mm IEC male, 9,5 mm 47~68 MHz (BI) 174~230 MHz (BIII) 470~862 MHz (UHF) 80 dBm a 20 dBm (29 dBV a 89 dBV) CVBS, RGB, Audio L/R CVBS in-out, Audio L/R in-out Video (CVBS) x 1, Audio L x 1, Audio R x 1, Audio S/P DIF x 1 RS 232 QPSK, 16QAM, 64QAM 2K / 8K FFT 1/ 2, 2/3, 3/4, 5/6, y 7/8 1/4, 1/8, 1/16, 1/32 MPEG-2 ISO/IEC 13818-1 Mx. 60 M bit/s 720 x 576 (PAL) 720 x 489 (NTSC) 4:3, 16:9 MPEG-1, MPEG-2 ISO/IEC 13818-1 Layer I&II Left / Right / Stereo 75 Ohm 1 Vpp 600 Ohm 2 Vrms

BAND AMPLIFIERS

D-WBA 415
SAT1 SAT2 UHF UHF UHF VHF VHF

DES 2xx +

IFA IFA 400 400

RF+SAT 2 SAT 1

Connecting AERIAL+TDT+VCR+HIFI+TV

DVB-T aerial

DVB-T adapted installation DVB-T indoor aerial +5 Vdc

RCA cable

RF cable
VCR Scart cable To record TDT HI-FI RF cable

Scart cable

IFA 2000 N series 8 FLOORS - 4 APPARTMENTS

RF+ FI SAT 1

FUTURA 2150 MHz 105 dBV 862 MHz 102 dBV 47 MHz 97 dBV

BSD 201 S

Planta N 8
DIS 409 + DES 425 + DIS 409 + DIS 409 + Planta N 7 DIS 409 + DES 425 +

DIS 409 + 58.6 65.2 62.6

DIS 409 + DIS 409 +

56.61.8 DIS 409 +

DIS 409 + Planta N 6 DIS 409 + DES 420 +
DIS 409 + 59.3 67.8 66.1 DIS 409 +
DIS 409 + Planta N 5 DIS 409 + DES 420 +
DIS 409 + 56.5 66.DIS 409 +
DIS 409 + Planta N 4 DIS 409 + DIS 409 + Planta N 3 DIS 409 + DES 416 + DES 420 +
DIS 409 + 53.8 64.DIS 409 + DIS 409 + 55 67.4 66.9 DIS 409 +
DIS 409 + Planta N 2 DIS 409 + DIS 409 + Planta N 1 DIS 409 + DES 411 + DES 416 +
DIS 409 + 65 DIS 409 + DIS 409 + 50 67.6 68.1 DIS 409 +
LINE AND DISTRIBUTION AMPLIFIERS
SABAL Series HA 405 Multiband Amplifier + SAB

SAB 301 SAB 301 SAB 301

SAB 301
SABAL Series WBA 433 Wide Band Amplifier

WBA 433

Supply voltage Operating temperature range Selective equalization Notch MHz 660 MHz Notch MHz dB 720 MHz Notch MHz 975 MHz

24 10% Vdc C

3 tuneable UHF filters in main amplification line 4 11
MODEL Reference Nbr. of inputs Bands Gain Gain regulation Output level DIN 45004B-60 Input/output impedance Noise figure Rejection out of band Test output Current draw Packing dimensions Weight

AMB UHF 38 15

AMB 802 DC** UHF 28 15

AMB BI/BIII UHF 38 15

AMB 2 BI/BIII UHF 38 15

AMB BIFM/BIII UHF 38 15

dB dB dBV dB dB dB mA mm Kg
Compliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band 30 dB (from main output) x 105 x 50 0,355
AMB 2 dB dB dBV FM BIII/UHF 28/38 25/15 BIFM/BIII 28 25

AMB 3 UHF 38 15

AMB UHF BI/BIII UHF UHF BI/BIII 28 25
AMB 832* 36032 UHF15 UHF15
dB 5 3/3 dBCompliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band dB 30 dB (from main output) mA mm 170 x 105 x 50 Kg 0,355
AMB 834* 36034 BIFM UHF15 UHF15 B 28 25

AMB 3 BIII 28 25

AMB 836** 36047 UHF 38 15

AMB 840* UHF UHF15

FM BIDAB UHF BIFM/BIII UHFCompliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band 30 dB (from main output) x 105 x 50 0,355 UHF1: 21-24 UHF1: 21-29 UHF1: 21-34 UHF1: 21-37 UHF1: 21-39 UHF1: 21-41 UHF2: 26-69 UHF2: 30-69 UHF2: 35-69 UHF2: 38-69 UHF2: 41-69 UHF2: 43-69 R S Q W U C UHF1: 21-45 UHF1: 21-47 UHF1: 21-49 UHF1: 21-54 UHF1: 21-56 UHF1: 21-59 UHF2: 46-69 UHF2: 48-69 UHF2: 50-69 UHF2: 55-69 UHF2: 57-69 UHF2: 60-69
UHF1: 21.37 UHF1: 38.69 * Other frequencies available under request. ** With DC pass 12 Vcc, 40 mA at UHF input.

B T L N V A

POWER SUPPLY
Power supply suitable for mast band amplifiers of AMB 800 and AMB 600 series.

Suitable for individual systems or small installations. Compatible with DTT requirements.
Protected against short-circuits. It has a shielded RF circuit, according to CE standard. Class II power supply, reinforced isolation.

Vac 4W C

MODEL * Reference Output voltage Max. output power Number of outputs Through losses Input/output impedance Packing dimensions Weight mm Kg dB Vdc mA
FA 802 N 10% 165 x 92 x 60 0,45

INDIVIDUAL RECEPTION

Mast amplification with AMB 836

UHF DAB FM

AMB 836

24 VDC

TEST (-30 dB)

Level meter

220 VAC

TV HI-FI

AMB 840

INDOOR AMPLIFIERS 1 GHz

AD 52 / AD 420
Broad band amplifiers for indoor use.
Suitable for installations with several TV sets which are remote from the main socket.
AD 420 model has a shielded RF circuit, according to CE standard, and independent gain regulation in UHF and VHF. Class II power supply, reinforced isolation.
MODEL Supply voltage Power consumption Operating temperature range Vac W C

AD 265 3,50

AD 253 4
MODEL Reference Band coverage Number of output Input/output impedance Return losses Gain Gain regulation Noise figure Max. output level DIN 45004B (60 dB) Packing dimensions Weight dB dB dB dB dBV mm Kg 20 VHF (E2 S20)
AD UHF (21 69) : 23 Output 2 : 13 2,8 Output 1 :: x 70 x 70 0,VHF (E2 S20)

AD UHF (21 69)

165 x 92 x 60 0,45
INDOOR AMPLIFIER FULL BAND 1 GHz

AD 540 / AD 1000

Self-powered broadband amplifier for indoor use. AD 540: amplifies signals from 47 to 862 MHz. AD 1000: amplifies signals from 47 to 862 MHz, and allows return path (from 5 to 30 MHz). AD 1000 A: amplifies signals from 87 to 862 MHz.
Suitable for individual digital terrestrial TV installations. The AD 1000 and AD 1000 A models are compatible with CATVs operators.
MODEL Supply voltage Power consumption Operating temperature range W C

AD 0 50

AD 1000 7

230 Vac 15% +10%

MODEL Reference Number of inputs Number of outputs Frequency range Gain Max. output level DIN 45004B, 60 dBc Input / output return losses Gain regulation Tilt regulation Noise figure Input / output impedance Return path frequency range Return path through loss Input / output connectors Packing dimensions Weight mm Kg MHz dB dB dBV dB dB dB dB

Double side band modulation, allowing one channel spacing operation. Compact design, making it easy to install. The output channel is easily programmed by two buttons and an alphanumerical display. Audio volume can be adjusted to be equalised with the volume of other programmes. Incorporates a video-test bar generator making TV tuning easier. Multi-standard and multi-band, with one single model covering all standards and channels. A PLL circuit ensures high stability of the output channel.
230 Vac + 10 -15% 3 VA -10 +50 C
MODEL Reference Output channel Standard Output level IN-OUT covered band IN-OUT insertion losses 15 - 47 MHz 47-2150 MHz RF input/output impedance RF input/output connectors Video input level Video input impedance Audio input level Adjustable audio deviation Audio input impedance Audio and Video input connectors S/N ratio Packing dimensions Weight dB mm kg mV KHz k Vpp dBv MHz dB
MOD E2-E4 / E5-S20 / 21-69 B /G / H / D / K / I / L / M / N (adjustable) 2 -2150 MHz < 2,5 < 1,F(f) 0,10 RCA (f) 55 dB 100 x 150 x 44 0,4

Distribution

agor has designed a wide range of components for guaranteeing a perfect distribution of the signal to each user.
Tap-offs and Splitters Saddle & clamp DES-N / DIS-N Series.. F Connector SPT / TAP Series.. Shielded diplexer DXR Series..
Outlet sockets 5-1000 MHz BASIC Series.. 100 5-2300 MHz BASIC Series.. 101 Equalizers ECU Series.. 102 Coaxial cables CCF Series... 103

DISTRIBUTION

TAP-OFFS AND SPLITTERS SADDLE CLAMP

DES+ / DIS+ Series

Shielded tap-offs and splitters with saddle & clamp, suitable for QPSK, QAM, and analogue signal distribution in community installations.
Maximum efficiency with minimum output level at headend. Same level between users in the same floor. Linear attenuation in the whole band. High signal levels can be used thanks to a special shielding design. Easy to set up. Weatherproof protector. Valid for reduced WEATHERPROOF PROTECTOR space installations. Valid for DiseqC signals

PE-DES N x 160 x 160 1,1

MODELS Reference Nr of outputs Covered band 5 - 47 MHz 47 - 550 MHz IN-OUT 550 - 862 MHz Insertion loss 950 - 1550 MHz 1550 - 2150 MHz 2150 - 2300 MHz 5 - 47 MHz 47 - 550 MHz IN-TAP 950 - 1550 MHz Tap loss 950 - 1550 MHz 1550 - 2150 MHz 2150 - 2300 MHz Isolation 47 - 950 MHz OUT-TAP 950 - 2150 MHz OUT-OUT 47 - 862 MHz TAP-TAP isolation 950 - 2150 MHz IN 47 - 862 MHz Return loss 950 - 2150 MHz OUT 47 - 862 MHz Return loss 950 - 2150 MHz TAP 47 - 862 MHz Return loss 950 - 2150 MHz CD pass IN - OUT OUT - IN 24 VDC, 0, 5A, 22 KHz IN - TAP CD pass TAP - IN 24 VDC, 0, 5A, 22 KHz TAP-TAP Packing dimensions Units per packing Weight MHz

Through losses

Directivity
Isolation TV-R Return losses Shielding factor

dB dB dB TV SAT mm Kg

*BSD 201 S and BSD 201 SDC model must be connected directly to tap-offs or splitter.
TV - SAT COVER MODEL Reference Colour Packing dimensions (20 u.) Weight (20 u.) SUPPLEMENT FOR SURFACE MOUNTING MODEL Reference Colour Packing dimensions (15 u.) Weight (15 u.) mm Kg SS BT 85020 beige 260 x 135 x 90 0,5 SS BT B 85031 white mm Kg C BSD 86230 beige 190 x 90 x 85 0,5 C BSD B 86231 white

EQUALIZERS

ECU Series
A family of passive components that operate in broadband allowing optimum flatness to be obtained in the signal response of a distribution network for TV (CATV).
These devices compensate the attenuation tilt caused by the coaxial cable used in the installation, which is proportional to frequency and cable length. Considering the complete band of frequencies used for the TV service, between 47-862 MHz, the attenuation tilt produced by the installation is influenced by type and length of the cable used, making it necessary to select the appropriate ECU model for each tilt (see chart).
Headend equipment ECU Tap-off ECU

ECU Broadband amplifier

ECU (MHz) (862 MHz) dB dB dB Input Output mm Kg 6
ECU F (f) F (m) 155 x 110 x 48 0,3

ECU 15

ECU 18
Reference Tilt Attenuation Input/output impedance Input/output return losses Connectors Packing dimensions (10 u.) Weight
MODEL SELECTION Cable attenuation 860 MHz / 100 m. 22 dB 20 dB 18 dB 16 dB 14 dB Recom. ECU model Cable length 30 m. 40 m. 50 m. 5,06 6,74 8,43 4,60 4,14 3,68 3,22 6,13 5,52 4,90 4,29 7,6 6,90 6,13 5,m. 70 m. 80 m. 90 m. 100 m. 110 m. 120 m. 130 m. 140 m. 150 m. 160 m. 170 m. 180 m. 10,11 11,80 13,49 15,17 16,86 18,54 20,23 21,91 23,60 25,29 26,97 28,66 30,34 69,19 10,73 12,26 13,79 15,32 16,86 18,39 19,92 21,45 22,99 24,52 26,05 27,58 8,28 7,36 6,44 ECU 06 9,65 8,58 7,51 11,03 12,41 13,79 15,17 16,55 17,93 19,31 20,69 22,07 23,45 24,83 9,81 8,58 11,03 12,26 13,49 14,71 15,94 17,16 17,39 19,62 20,84 22,07 9,65 10,73 11,80 12,87 13,95 15,02 16,09 17,16 18,24 ECU 12 ECU 15 9,31 ECU 18

ECU 09

COAXIAL CABLES

CCF Serie

Low loss cables for use in CATV signal distribution in munity and individual MATV-SMATV installations.
CCF SAT is valid for 1st IF SAT installations. CCF 017 & CCF 020 is used in general distribution. CCF SAT H in a low smoke halogen free cable(LSHF). CCF TRA & CCF TRN:are valid for trunk installations.

CCF TRA

Black cables should be used for distribution where PE cables are to be exposed to sunlight.

CCF SAT-N

CCF SAT
MODEL Internal conductor Material Diameter Resistance Dielectric Material Diameter External conductor Material sheet Material net Resistance External conductor Diameter Min. curvature radius Attenuation / 100 m:

Radio Unit dBV Mx. Mn Analog FM Digital DAB Analog AM Television Digital COFDM 1st IF SAT Analog Digital FM QPSK CaTV 64QAM 70 45

CARRIER TO NOISE RATIO

Radio Unit dB Analog FM 38 Digital DAB 18 Analog AM 43 Television Digital COFDM 25 1st IF SAT Analog Digital FM QPSK CaTV 64QAM 28
CARRIER TO SINGLE FREQUENCY INTERFERENCES RATIO
Television Unit Analog AM 54 Digital COFDM 10 1st IF SAT Analog Digital FM QPSK CaTV 64QAM 35

INTERMODULATION RATIO

Television Unit dB Analog AM 54 Digital COFDM 30 1st IF SAT Analog Digital FM QPSK CaTV 64QAM 35

BIT ERROR RATE (B.E.R.)

BER QAM Better than 9 x 10-5 BER QPSK Better than 9 x 10-5 BER COFDM-TV Better than 9 x 10-5

Product Index

Alphabetical index (models).. 120 Numerical index (ref. numbers).. 121

PRODUCT INDEX

ALPHABETICAL INDEX (MODELS)
CBL AC3 CC 01 CCF 017 CCF 019 CCF 019 N CCF 020 CCF SAT CCF SAT H CCF SAT N CCF TRA CCF TRN CFR 20 CFR MMP CFR N118 CFR N218 CFR N56V CIF 6000 + AD CIF 7000 + AD CMD 3 RCA CMD EU-ST CNR F TRN CNR HI CNR MF CNR MI CNX 300F CNX 300M CP 01 CX 75F

83702 84011

GRM U50 GRP 001 GRP AT
SAC 7415 N SDM 6000 + SDM 6000 + ST SDM 7000 + SDM 7000 + ST SDT 6300 N SDT 6400 N SDT 7300 N SDT 7400 N SDT 6300 SB SDT 6400 SB SDT 7300 SB SDT 7400 SB SHA 6115 N SHA 7115 N SM 6000 + SM 6000 + ST SM 7000 + SM 7000 + ST SPS 523 SPS 6000 N SPS 6100 + SPS 7000 N SPS 7100 + SPT 204 SPT 409 SPT 613 SPT 815 SPU 40 SRM 6000 + SRM 6000 + ST SRM 7000 + SRM 7000 + ST SS BT SS BT B
AB 012 T ABF 012 ACH 045 AD 1000 AD 1000 A AD 2300 AD 420 AD 52 AD 540 ADF HHS AFM 6000 AFM 7000 aktive AL 46 AMB 610 N AMB 620 N AMB 620 NF AMB 621 N AMB 623 N AMB 624 N AMB 630 N AMB 631 N AMB 632 N AMB 632 NFT AMB 634 N AMB 635 N AMB 640 N AMB 644 N AMB 810 AMB 820 AMB 823 AMB 824 AMB 830 AMB 831 AMB 832 AMB 834 AMB 835 AMB 836 AMB 840 AN 02 AN 03-3 AN 03-4 AN 07 ANC VT ANT DAB APR 035 ARG V35 ARG V40 AT 020 AT 323 ATF 69
IC 001 ICF 001 IFA 2000 N IFA 400 IFA 6000 S IFA 7000 S IFL 6000 IFL 6000 T IFL 7000 IFL 7000 T 45 45

Kit PO 064 Kit PO 18

LNB 201 LNB 19
DA 353 DA 353 A DA 354 DA 354 A DB 012 DES 211 + DES 216 + DES 220 + DES 225 + DES 411 + DES 416 + DES 420 + DES 425 + Di@na G u. Di@na G 69 aktive Di@na G 69 aktive 6 u Di@na G 69 Digit 45 Digit 6u Digit 75 DIS 204 + DIS 409 + DiSAT 6U DiSAT 6V DPO 105 D WBA 415 DXR 216 DXR 2D DXR 99
MB 021 MD 012 F MDIN 5 MICROMATV MICROMATV futura 100 MICROMATV futura 100 C MICROMATV futura 200 MICROMATV futura 200 C MICROMATV futura 300 MICROMATV futura 300 C MICROMATVplus MICROMATVplus N Min@ MOD 500 MST 315 MST 325 MST 25

* Pole not included. See accessories.

PO 064 cm cm x 57 32,7

PO 73 x 80 46,8 Offset Electro zinc-coated steel Polyester Floor / Wall / Pole

DPO 105* x 100 58,3

Mast 5 82
mm < ) ) < < ) mm GHz dB % < )
10 12,2,>60 2,4 0,64 Operating: up to 100 km/h Maximum: up to 130 km/h 830 x 840 x 2,1 39,2

610 x 610 x 110 5

1020 x 1000 x 120 10

ANTENNES

SATELLITE DISH + LNB Kits
Kits composed of Offset satellite dishes manufactured in eletro-zinc coated steel with a polyester coating and LNB converters.
APPLICATION Suitable for community and individual satellite TV installations. CHARACTERISTICS The parabolic reflectors are designed to achieve high gain, guaranteeing great strength and mechanical resistance. Easy fitting system. LNB: low noise figure and high gain.
MODEL Reference Packing dimensions (4 u.) Weight (4 U.) SATELLITE DISH Diameter Focal distance Type of reflector Material Coating Mast diameter Elevation Offset angle Azimuth Frequency Gain @10,7 GHz Gain @11,7 GHz Gain @12,7 GHz Efficiency F/D relation Wind speed LNB Number of inputs Polarity Input frequency Oscillator frequency Output frequency range Noise figure at 20 C Conversion gain Output level (1 dB of compression) Power supply 22 KHz tone Consumption Output connectors Operating temperature range GHz GHz MHz dB dB dB V mA C mm Kg cm cm
KIT PO 630 x 605 x 113 14,x 57 32,7 Offset Electro zinc-coated steel Polyester 28 GHz dBi dBi dBi % 360 10,7 12,75 33,5 34,8 35,4 > 70 0,64 Operating: up to 130 Km/h Maximum: up to 150 Km/h 1 VL, HL, VH, HH Low Band 10,7 11,7 High Band 11,7 12,75 Low Band 9,75 High Band 10,60 Low Band High Band 0,65 (typical 55) > 0 (typical 5) 11,(V); (H) 0,6 Vpp 0,2 for High band < 150 F (f) 25 + 60
KIT PO 850 x 844 x 73 x 79 53

35.9 37.4 38.0

CONVERTERS
Universal low noise block converters suitable for any offset satellite dish.
APPLICATION Valid for any commercial TV SAT applications. The Universal model has one output for individual installations and the Quattro model has 4 outputs for community installations. CHARACTERISTICS Stand out for their low noise figure and high gain which together with Offset type satellite dishes make it possible to obtain merit factors ideal for collective installations. One model for any kind of Ku transmission band.
MODEL Reference Number of inputs Polarity Input frequency Oscillator frequency Output frequency range Noise figure at 20 C Cross polarity rejection Conversion gain Output level (1 dB of compression) Power supply 22 KHz tone Consumption Output connectors Operating temperature range Packing dimensions Weight C mm Kg mA GHz GHz MHz dB dB dB dBm V

SMULTI - PROCESSING SYSTEM HEADEND AMPLIFIER
SHA 6115 N / SHA 7115 N SAC 6415 N / SAC 7415 N
Broadband Amplifiers for SMATV and CATV headends.A. The SHA model is a single input amplifier. The SAC Amplifier is a 4 input model to combine and amplify up to 4 frames (32 channels).
APPLICATION TV community installations, both SMATV and CATV. CHARACTERISTICS They have gain regulation and a TEST point for the output signal level. Each input has an amplification step before gain regulation. This way, the noise figure is not directly affected by the gain regulation. Screws and power supply cable included. Optimum frequency response. High dynamic threshold.
SHA N Supply voltage Current drawn Operating temperature range Vdc mA 170 (4 W) 24

SAC N 320 (7,7 W) C

MODEL Reference Assembly system Input/output connectors Number of inputs Frequency range Input and output impedance Gain Gain regulation Band flatness Noise figure @ Max. Gain IM3 output level CTB output level Isolation between inputs TEST output level TEST output connector Packing dimensions Weight mm Kg MHz dB dB dB dB dBV dBV dB dB

SHA 6115 N 35016 Frame 1

SHA 7115 N Rack F (f)

SAC 6415 N 35018 Frame 4

SAC 7415 N Rack
(60 dBc DIN 45004 B) 108 (60 dBc 42 Ch, EN 50083-3) 30 F (f) 272 x 166 x 45 1,37
MULTI - PROCESSING SYSTEM 1st IF SAT TWIN CONVERTER

IFL 6000 / IFL 7000

Twin Converter which converts 1st IF SAT signal to be distributed through just one cable. Each IFL unit has a twin conversion module to independently process 2 transponders. Designed for processing Analogue and Digital TV. Can be operated with adjacent transponders, both at input and output.
APPLICATION Satellite analogue or digital TV community installations in large and medium sized communities, where the 1st IF SAT signal must be distributed through just one cable. CHARACTERISTICS One model is all that is needed for any input and output channel. Input and output frequency accuracy are controlled by high precision PLLs, that guarantee a very low phase noise. A built-in AGC control fixes the output level. IFL-T model is a 1ST IF SAT TERMINAL converter and it has 2 independent inputs for processing signals coming from different sources. Screws and power supply cable included.

Supply voltage Current drawn Operating temperature range

24 (130 mA) Vdc 65 mA C

MODEL Reference Frequencies covered Number of inputs 1st IF Number of inputs RF Gain (1 IF)
IFA MHz 1 (MHz) 1 (MHz) dB dB dB dB dB dBV dB mm Kg 40 (950 MHz) 48 (2150 MHz) (MHz) 1,5 (MHz) 20 (MHz) 125 (DIN 45004B, DIM 35 dBc) 113 (30 transponders, DIM 35 dBc) VDC / 300 mA 195 x 70 x 32 0,35
Noise figure RF signal rejection (1st IF input) Through losses RF Gain adjustment Output level @2150 MHz Return losses Voltage to LNB Packing dimensions Weight
NEXUM SYSTEM POWER SUPPLY

SPS 523

Power supply module for providing operating voltage to the Nexum series modular system.
APPLICATION Medium- to large-sized community digital and analogue TV installations located in poor reception areas with big level differences between channels. CHARACTERISTICS Designed using switching techniques, achieves high performance and minimum losses. Zamak chassis with metal covers. High degree of shielding. Protected against overloading. Complies with the UNE EN 50083-1; UNE EN 50083-2 standard.
MODEL Reference Input voltage Output voltage Consumption (55 W output) Max. current output Operating temperature range Packing dimensions Weight Vac Vac VA A C mm Kg
SPS 24 5% 70 2,- x 70 x 80 0,75

NEXUM SYSTEM

Designed for mounting modules of the Nexum Series Modular System. The kit supplied includes all necessary accessories for wall mounting. Raster: 40 mm. Dimensions: Ref. 83109: 531 x 139 x 15 mm. Ref. 83110: 747 x 139 x 15 mm. Ref. 83111: 480 x 177 x 70 mm. Ref. 83112: 325 x 140 x 15 mm. BST N12 y BST N18 APPLICATION 6 mod. + power supply 12 mod. + power supply 18 mod. + power supply 10 mod. + power supply for 19 Rack mounting MODEL BST N06 BST N12 BST N18 BSK N10 REF. 83110 83111

BSK N10

Designed for installation and protection of Nexum system elements. Includes all necessary accessories for wall mounting. Safety lock provided. Dimensions: Ref. 83604: 790 x 590 x 205 mm. (8 Kg) Ref. 83607: 790 x 250 x 150 mm. (6 Kg) Ref. 83608: 365 x 165 x 250 mm. Ref. 83609: 570 x 165 x 250 mm. APPLICATION Housing for 2x18 Nexum or 1 x 18 Nexum + 1 x 8 SCM 6000 Housing for 1x18 Nexum Housing for 1x6 Nexum Housing for 1x12 Nexum MODEL CFR N218 CFR N118 CFR N106 CFR N112 REF. 83608 83609

Coaxial resistive load for loading open connectors. TYPE OF CONNECTOR F (m) MODEL CX 75 F REF. 84011
Rigid 75 coaxial bridge for splitting or combining RF signals. Raster: 40 mm. TYPE OF CONNECTOR F (m) - F (m) MODEL PMD FFN REF. 84034

ADAPTER

F Female-Female TYPE OF CONNECTOR F (f) - F (f) MODEL ADF HH REF. 84013

F MALE CONNECTOR

F(m) connector for cable (outside diameter 6,8 mm) TYPE OF CABLE CCF 017-N MODEL CNR MF REF. 84012

BAND AMPLIFIER

Frequency band: 470 to 862 MHz Gain: 12 dB Max. output level: 105 dBuV Noise figure: 3,5 dB Band flatness: 2 dB Power supply: 24V 5% Consumption: < 50 mA TYPE OF CONNECTOR F(f)-F(m) MODEL ABF 012 REF.

SUPPLY INJECTOR

Frequency band: 5 to 2150 MHz Return losses: -10 dB Through losses: 0,5 dB DC pass: 1A TYPE OF CONNECTOR F(f)-F(m) MODEL ICF 001 REF. 85051

MODULE ADAPTION KIT

For adaption to a SCM 5000 Frame. Includes: 1 metallic support with screws. 2 power supply cables. 2 F-F coaxial bridges. APPLICATION SCM 5000 MODEL NEX KIT REF. 83706
POWER SUPPLY ADAPTION KIT
For adaption to a SCM 5000 Frame. Includes: 1 metallic support with screws. 1 power supply cable. APPLICATION SCM 5000 MODEL SPS KIT REF. 83707
SCM 300 MODULE CONNECTIONS
Connections to install Nexum model in SCM 300 module. APPLICATION SCM 300 MODEL CNX 300M REF. 83708
SCM 300 POWER SUPPLY CONNECTIONS
Connections to install Nexum power supply in SCM 300 module. APPLICATION SCM 300 MODEL CNX 300F REF. 83709
MHz 2 polarities of 1st IF SAT 8 terrestrial channels, analogue or digital FM radio DAB radio
IFA IFA NEX NEX NEX NEX NEX NEX NEX NEX NEX NEX SPS

SAT 1 RF SAT 2

DXR 2D (Ref. 86242)

SAT 1 + RF SAT 2 + RF

Nr. Channel amplifier 1st IF SAT amplifier Amplifier FM radio Amplifier DAB radio Power supply
DESCRIPTION - NEX - IFA - NEX 402 - NEX DAB - SPS - PMD FFN - CX 75F - DRX 2D
Nexum Series Ref. 39204 Ref. 39200 Ref. 39201 Ref. 69023 Ref. 84034 Ref. 84011 Ref. 86242
75 F-F coaxial bridge Load Splitter- Combiner
MHz 1 polarity of 1st IF SAT DTT Channels: 66 to terrestrial channels, analogue or digital

SPS NEX NEX NEX NEX

FM MHz 87,5108 1

BI Fixed No

dB dB dB dB dB dBV dB

6 71/101

6 70/95 55/80

MicroMATV futura 1 RF+1 IF SAT
MicroMATV futura 2 RF 117 RF+1st IF SAT 121

390 x 275 x 60

(1).- 1ST IF SAT input (only MicroMATV futura 200 and MicroMATV futura 300). (2).- 4 dB lower (MicroMATV futura 300 model).

FAGOR CONTROL UNIT

UCF 200
Control unit valid for programming a MicroMATV pro and a MicroMATV futura by means of a simple and intuitive menu. With memory for cloning up to 8 different configurations and one-key programming of more than one MicroMATV. Includes protector sleeve.
MODEL Reference Display Packing dimensions Weight mm Kg
UCF Alphanumerical, (2 x 16 characters) 46 x 18 x 14 0,2

BUS USB ADAPTER

BUS ADAPTER 1.7
Communication interface between computer and UCF 200 control unit for:
Automatic programming of the MicroMATV Futura by means of the "Programmation Guide". Recording of configurations/installations in the computer. Export of configurations to the UCF 200 control unit for future installations.
MODEL Reference Packing dimensions Weight mm Kg
BUS ADAPTER 1.165 x 65 x 50 0,2

MicroMATV plus

Universal amplification system capable of independently processing up to 10 TV channels (UHF and VHF), as well as the FM signal.
APPLICATION Suitable for community headends installations of digital and analogue terrestrial TV. The unit is designed to receive signals coming from up to 5 different antennas in medium-to-individual sized installations. The system can be configured according to the number of channels picked up by each antenna. CHARACTERISTICS Includes the Automatic Equalization System AES, an exclusive function that simplifies the setting-up, since it automatically adjusts the input signals, guaranteeing a perfect output signal. MicroMATV plus can also be manually adjusted. Easy to programme through an external Control Unit, UCF 100. All functions are automatically memorised and controlled by a FAGOR Microprocessor. Includes a visual level indicator. The amplifier has a 24V output and an auxiliary TV signal input.

230 Vac 15 + 10 % 21 W C

MODEL Reference Number of inputs Number of channels Gain Independent regulation per channel General regulation Selectivity ( 20 MHz) Noise figure (typ.) Max. input level Min input level for S/N >45 dB (opt. picture quality) Operating input level (automatic equalization AES) TV auxiliary input level Auxiliary input frequency range Auxiliary input gain Output level DIN 45004B ( 60 dB)* IM2 (-60 dB) Output level: 10 channels Isolation between inputs 24 Vdc output Product dimensions Packing dimensions Weight
* FM: DIN 45004B (30 dB).

MICROMATV

1.BI / BIII dB dB dB dB dB dBV BI BIII UHF BI BIII UHF dBV dBV dBV MHz dB dBV 116 dBV dBV UHF - UHF UHF - VHF /FM dB mA mm mm Kg / 25 5,UHF FM 1 FM BI / BIII / 25

SAB 4 BI / FM / BIII / UHF 250 x 125 x 62 0,8
SAB 4 BI / FM / BIII / UHF / 33 / 40 /

SAB 304

VHF B III VHF BI FM UHF

SAB 404

ICF 001

1ST IF SAT AMPLIFIER

IFA 3000 Book
1st IF SAT amplifier with programmable supply voltage for a Universal LNB and diplexed combining of the VHF and UHF channels.
APPLICATION Community satellite TV installations with IF processors. CHARACTERISTICS A high performance RF / 1st IF SAT diplexer guarantees a noise free terrestrial TV reception. It provides optional supply voltage for the LNB, any possibility (0, 13, 17 V // 0, 22 KHz). The 1st IF SAT amplification with positive slope (more gain in high frequencies: 8 dB) to compensate the cable attenuation, allows distribution of the 1st IF SAT signal to more users.
Supply voltage Current drawn Operating temperature range MODEL Reference Input/Output connectors Number of inputs LNB DC pass 1st IF SAT Frequency range 1st IF SAT input rejection RF Frequency range RF Through losses Output band covered IF Input level Gain 1st IF Gain regulation Noise figure Output level @ 2150 MHz Packing dimensions Weight

195-265 Vac 12 W C

IFA 3000 BOOK 35911 F (f) 1 input 1st IF SAT + 1 input RF mA MHz dB MHz dB MHz dBV dB dB dB dBV mm Kg 0, 13, 17 V // 0, 22 KHz (250 mA) 40 @ MHz 1,- @ 950 MHz 38 @ 2150 MHz 122 (DIN 45004B, -35 dBc) / 110 (15 transponders) 103 x 171 x 23 0,75

FM SAT

Book + IFA Book

IFA Book

AUX OUT

MULTISWITCHES

Shielded SAT-IF stand alone multiswitches.
APPLICATION For distributing one or two satellites signals in small and medium size installations. Each user receives both satellite and terrestrial signal by only one coaxial cable and any satellite polarisation can be selected from each users receiver. CHARACTERISTICS Star distribution of 4 or 8 satellite polarizations. Input for terrestrial signal, which can be selected in active or passive mode. 5-65 MHz return path. For 4, 8 or 16 users distributions. Control by voltage/tone from the users receiver. Models with 8 inputs support also DiseqC2.0. The high selectivity of the input filters guarantee the maximum quality of the signal.
FMS 516 A + MicroMATV book
FMS 904 A + MicroMATV book
4 pol + Terr 16 receivers

8 pol + Terr 8 receivers

Passive
MODEL Reference Inputs Outputs Return Path Frequency Range Terr SAT Return Path Terr Passive * Gain Terr Active * SAT Terr Active * Max. output level SAT Terr to SAT Rejection between inputs SAT to Terr SAT -SAT Isolation between outputs Polarisation control Satellite control Max. LNBs current Input return losses Output return losses Connectors Current consumption from receiver Supply voltage Power consumption without LNB Packing dimensions Weight

AMB 2 BI/BIII UHF 38 15

AMB BIFM/BIII UHF 38 15

dB dB dBV dB dB dB mA mm Kg
Compliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band 30 dB (from main output) x 105 x 50 0,355
AMB 2 dB dB dBV dB dB dB mA mm Kg FM BIII/UHF 28/38 25/15 BIFM/BIII 28 25

AMB 3 UHF 114 75

AMB UHF BI/BIII UHF UHF 38 15
5 3/6 Compliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band 30 dB (from main output) 170 x 105 x 50 0,355
MODEL Reference Nbr. of inputs Bands Gain Gain regulation Output level DIN 45004B-60 Input/output impedance Noise figure Rejection out of band Test output Current draw Packing dimensions Weight AMB 3 dB dB dBV dB dB dB mA mm Kg BI, FM BIII UHF FM 18 15
AMB 836* 36047 BIDAB UHF BIFM/BIII 28 25

AMB 4 UHF UHF15

Compliance with EN 50083-2 Antenna Input Resistance Internal immunity against unwanted signals from out of band 30 dB (from main output) x 105 x 50 0,355 KITS AVAILABLE: REF 36006 KIT AMB 811 K AMB 822 K AMB 838 K AMB 836 K COMPOSITION AMB 801 + FA 802 N AMB 820 + FA 802 N AMB 830 + FA 802 N AMB 836 + FA 802 N
UHF1: 21.49 UHF1: 50.69 * With DC pass 12 Vcc, 40 mA at UHF input.
Mast amplification with AMB 836

AMB 840

AMB 836

24 VDC

TEST (-30 dB) Level measurer

MAST AMPLIFIER

AMB 700
A new concept in mast amplifiers. Both models include a different combination of band pass and stop band filters, configurable upon request on the factory, enabling an exceptional operation in a reception sites where two UHF antennas are required. For reception sites just in the border of the coverage area, a switchable DC power in both inputs, enable the use antennas with active dipoles. Depending of the cable run and the numbers of outlets to be feed we offer two models, AMB 700 or AMB 701 with different gain.
APPLICATION Specially designed for DTT reception. CHARACTERISTICS Gain regulation independent of the noise figure. Exceptional protection against ingress noise. High screening mechanical concept. F type connectors. Extra operational input level range. Keeps unaffected the antenna signal quality achieved for the antenna system directivity. Applicable in areas of overlapping coverage in SFN.

24 10% Vdc C

MODEL Reference N of inputs Bands Gain Gain regulation Output level DIN 45004B-60 Input / output impedance Noise figure Selectivity Rejection out of band Supply voltage Consumption DC pass Dimensions Weight Vdc mA mA mm Kg dB dB dBV dB dB FM 106
AMB 700 365xx * 4 BIII / DAB UHF1 (see Fig. 1) 4 UHF2 (see Fig. 1) FM 106

AMB 701

BIII / DAB 106

UHF1 (see Fig. 1) 36 15

UHF2 (see Fig. 1) 36 15
15 dB, band filters @ C 3 (see Fig. 1) 12 dB, band filters @ Ch. 4 Compliance with EN 50083 -2 "Antenna Input Resistance" 24 10% 30 0,355 170 x 105 x 30 30

* Indicate the channels to be received by each UHF input.
1. Select the model of amplifiers depending on the type of filter: split band, channel pass and band pass. 2. After selecting the model, you must define the channels you want to receive.

SPLIT BAND

How to choose the most convenient amplifier?

TYPE OF FILTER

CHANNELS TO BE DEFINED UHF - C1=. UHF 2 C2=. - 69

CHANNEL PASS

UHF 1 C= UHF 2 Rest of band
UHF 1 C1=.; C2=. UHF 2 Rest of band

BAND PASS

MAST BAND AMPLIFIER KIT

AMB 200 K

Kit made up of a mast band amplifier + power supply, specially designed to receive DTT signals with maximum quality.
APPLICATION Suitable for individual systems or small installations. CHARACTERISTICS Amplifier: Separate level adjustment for each input. Low noise figure. "F" type connectors. Circuit housed in a shielded metal box that offers a high degree of immunity against radio-electric interference. Power supply: Two outputs in a shielded circuit. Low consumption. Small size. Protected against short-circuits. With ON indicator led.
Packing dimensions Weight

112 x 112 x 98 mm 0,5 Kg

AMPLIFIER MODEL Reference N. of inputs Bands Gain Gain regulation Noise figure Return losses Output level DIN 45004B 60 Input/output impedance Current drawn Supply voltage Operating temperature dB dB dB dB dBV mA Vdc C 10% 6; 4 AMB 212 K BIII; UHF 20; 27 BIII AMB 222 K UHF BIII UHF AMB 223 K 36403

VHF 15 / UHF 15

POWER SUPPLY MODEL Reference Output voltage Output current N. of outputs Through losses Return losses Input-output impedance Input voltage Operating temeperature dB dB VAC C Vdc mA FK 24 10% 50

POWER SUPPLY

FA 152 / 154
Power supply for mast amplifiers.
APPLICATION Individual systems and small installations. Compatible with the requirements for Digital Terrestrial TV and High Definition TV.
CHARACTERISTICS High performance switched power supply, which provides a high output current with less consumption. Modern design and small size, making it easier to install. "F"-type connectors. The 4-output FA 154 model avoids having to include an external splitter in installations with up to 4 connections. Protected against short-circuits. With an ON indicator led.
Supply voltage Operating temperature
MODEL Reference Number of outputs Frequency range Through losses Output voltage Max. output current Input / output impedance Packing dimensions Weight MHz dB Vdc mA mm Kg
FA 24 10% 140 x 97 x 51 0,26

FA 4 7

AMB 700 + FA 152

FA 802 N

Power supply suitable for mast band amplifiers of AMB 800 and AMB 600 series.
APPLICATION Suitable for individual systems or small installations. Compatible with DTT requirements. CHARACTERISTICS Protected against short-circuits. It has a shielded RF circuit, according to CE standard. Class II power supply, reinforced isolation.

Vac 4W C

MODEL Reference Output voltage Max. output power Number of outputs Through losses Input/output impedance Packing dimensions Weight dB mm Kg Vdc mA
FA 802 N 10% 165 x 92 x 60 0,45

INDOOR AMPLIFIERS 1 GHz

AD 420
Broad band amplifiers for indoor use.
APPLICATION Suitable for installations with several TV sets which are remote from the main socket.
CHARACTERISTICS Has a shielded RF circuit, according to CE standard, and independent gain regulation in UHF and VHF. Class II power supply, reinforced isolation.
MODEL Supply voltage Power consumption Operating temperature range Vac W C

AD 0 50

MODEL Reference Band coverage Number of input Number of output Gain Max. output level DIN 45004B ( 60 dB) Return losses Gain regulation Noise figure Input/output impedance Input/output connectors Packing dimensions Weight mm Kg dB dBV dB dB dB 20 VHF (E2 S20)
AD UHF (21 69) F (f) 165 x 92 x 60 0,45

BIF TV R HI-FI

220 V TV
INDOOR AMPLIFIER FULL BAND 1 GHz

AD 540 / AD 1000

Self-powered broadband amplifier for indoor use. AD 540: amplifies signals from 47 to 862 MHz. AD 1000: amplifies signals from 47 to 862 MHz, and allows return path (from 5 to 30 MHz). AD 1000 A: amplifies signals from 87 to 862 MHz.
APPLICATION Suitable for individual digital terrestrial TV installations. The AD 1000 and AD 1000 A models are compatible with CATVs operators. CHARACTERISTICS Gain control It has slope regulation to compensate the losses due to coaxial cable attenuation. Models AD 1000 and AD 1000A incorporate an equalization control. AD 540: 4 independent outputs with the same output level. AD 1000/AD 1000 A: Two independent outputs, the second one attenuated 10 dB with respect to the first one. The circuit is housed in a zamak box that ensures a high level of shielding.

dB dB dB dB mm Kg

TAP-OFFS MODEL Reference Number of outputs Covered band 5 - 47 MHz Through 47 - 862 MHz loss 950 - 2150 MHz 2150 - 2300 MHz 5 - 47 MHz Tap 47 - 862 MHz loss 950 - 2150 MHz 2150 - 2300 MHz 5 - 47 MHz Directional 47 - 950 MHz attenuation 1000 - 2300 MHz 5 - 47 MHz Outputs 47 - 950 MHz isolations 1000 - 2300 MHz Return 5 - 862 MHz losses 950 - 2150 MHz Min. screening 5 - 862 MHz factor 950 - 2300 MHz Packing dimensions (10 u.) Weight (10 u.) MHz dB 3,5 5,15,2 17,5 18,16 1,4,19,0,5 1,5 3,24,5 24,16 3,5 5,15,16 TAP TAP 6 TAP TAP TAP 8 TAP SPT 4 5, 20
SPLITTERS SPT 4 7,9,7 10,5 21 SPT 6 10,14, 20 SPT 12 15, 21
1,3,3,7 2,24,5 20,22,22,65 55

205 x 125 x 70 1,5

115 x 110 x 47 1,5
CHARACTERISTICS TAP- OFFS with 1, 2, 4, 6 and 8 outputs. Splitters with 2, 4, 6 and 8 outputs. DC pass: SPT: through outputs. TAP: at the main input-output.

SHIELDED DIPLEXER

Shielded diplexer with saddle clamp connection.
CHARACTERISTICS DXR 216 +: diplexer with 2 inputs/1 output, suitable for splitting or combining RF/1st IF SAT. DXR 2D +: suitable for incorporating 1st IF SAT signals.
MODEL Reference DC pass 24 VDC, 0 5A, 2 KHZ Covered bands Frequency range Number of inputs Number of outputs Through loss Rejection, SAT input to RF Rejection, RF input to SAT Impedance Return losses Packing dimensions (10 u.) Weight (10 u.) dB dB dB dB mm Kg 1,7 MHz RF 1
DXR 216+ 86244 SAT IN - OUT SAT x 90 x 50 0,85 RF 1 5
DXR 2D+ 86243 SAT 2 (SAT 1 and SAT 2) 1(950-1200 MHz 2 dB) 25 25
2 (SAT 1+ RF and SAT 2+ RF)
APPLICATION EXAMPLE DXR 2D +
INTERNAL DIAGRAM DXR 2D +
SAT1 SAT1 RF SAT2 SAT2 RF

DXR 2D +

DES 4xx +

SAT1+RF

SAT2+RF

OUTLET SOCKETS MHz

Outlet sockets with inductive devices for adequate filtering of the signals at the outputs, with minimum through losses.
APPLICATION TV Installations, both individual or community to be used as end socket or for cascading. CHARACTERISTICS The circuit has a metal (zamak) housing to achieve a high degree of shielding. It has a special shielding at the input and output connections, and it is designed for easy installation. The outlets directivity guarantees enough isolation between floors. Compatible with most of the electrical devices available.

MODEL Reference Technology Band coverage Through losses Derivation losses Directivity

BID 01 N

BID 10 N
beige white 260 x 135 x 90 0,5
MHz 87,MHz TV MHz MHz DATA 87,MHz TV - OUT DATA - OUT

MHz dB dB dB

Inductive End 3,25

COAXIAL CABLES

Low loss cables for use in CATV signal distribution in community and individual MATV-SMATV installations.
APPLICATION CCF SAT is valid for 1st IF SAT installations. CCF 017 & CCF 020 is used in general distribution. CCF SAT H is a low smoke halogen free cable (LSHF). CCF TRA & CCF TRN:are valid for trunk installations. CHARACTERISTICS Black cables should be used for distribution where PE cables are to be exposed to sunlight.

CCF TRA

CCF SAT-N

CCF SAT

MODEL Internal conductor Material Diameter Resistance Dielectric Material Diameter External conductor Material sheet Material net Resistance External conductor Diameter Min. curvature radius Attenuation / 100 m:

CCF TRN

CCF SAT CCF SAT N

CCF SAT H

CCF 019 CCF 019 N

CCF 017

CCF 020

mm /Km

1,6 8,57

1,63 9

1,1 20
Cu 1,PE 4,8 Cu / Pet Cu 21 6,8 4,4 6,2 8,7 10,7 13,4 15,1 18,1 19,5 22,7 23,9 25,8 27,9 28,6

1,15 20

7,2 Cu / Pet Cu 8,3 10,2,7 3,8 5,4 6,6 8,3 10,2 12,3 13,5 16,4 17,3 18,7 18,9 19,85
7,2 Al / Pet / Al CuSn 8 10,1 3,1 4,4 6,3 7,7 9,6 10,14 16,2 17,1 18,20,5

4,9 Al / Pet / Al Al

/Km mm mm 50 MHz 100 MHz 200 MHz 300 MHz 470 MHz 600 MHz 860 MHz 1000 MHz 1350 MHz 1500 MHz 1750 MHz 2050 MHz 2150 MHz 5-1000 MHz 1000-2150 MHz
22 6,7 4,8 6,5 8,12,5 14,9 17,9 22,2 22,4 23,5 25,7 27,6 28,75
30 6,4,7 6,5 8,8 10,3 12,8 14,9 17,21,6 22,6 26,4 29,5 30,70 55
33 6,9 4,8 6,4 8,5 9,8 12,3 14,5 17,4 22,3 22,2 23,3 25,8 28,2 29,6
46 6,6 4,5 6,6 8,6 10,2 12,7 15,1 18,1 19,24,4 26,4 29,3 30,65
Shielding efficiency Capacity Impedance Reflection point

dB pF/m dB

< 20
MODEL Reference Coil length Coil support External conductor Packing dimensions Weight
CCF TRN wood PE black 26,8
CCF TRA wood PE black 25,5 250
CCF SAT 100/500 PVC white 5/25
CCF SAT N PE black 100 PE black 5/25
CCF SAT H plastic 84133 100/500 250
CCF 84119 100/500 PVC white 5/25

CCF 019 N PE black 10

CCF 100/500 PVC white 4,5/23
cardboard cardboard cardboard cardboard PVC white 12
cardboard cardboard cardboard cardboard cardboard cardboard PVC white 12
LSFH white LSFH white 10,5 5,5/28
400 x 400 x x 360 x x 360 x x 270 x x 360 x x 270 x x 265 x x 270 x x 360 x x 270 x x 360 x x 270 x x 270 x 660
whole range of accessories to improve the quality of the

Connectors.... Amplifiers... Attenuators.... 75 Ohms load... Combiners & diplexers... Filters... Supply injectors... Weatherproof protector... Loading resistor...
installations, such as combiners, attenuators, filters,.

F (m) CONNECTOR

F(m) connector for cable (outside diameter 6,8 mm). TYPE OF CABLE MODEL CNR MF REF. 84012
CCF 017/019/020/SAT or similar

SHIELDED CONNECTOR

TYPE OF CONNECTOR IEC 9,5 (m) IEC 9,5 (f) MODEL CNR MI CNR HI REF. 84028 84029

CONNECTOR

F(m) connector for trunk cable. TYPE OF CABLE CCF TRN / CCF TRA MODEL CNR F TRN REF. 84014
BROAD BAND AMPLIFIER (UHF)
Frequency band: MHz Gain: 12 dB Flatness: 2 dB Noise figure: 3,5 dB Power supply: 24 V 5% Consumption: <50 mA Output level: ABF 012: 98 dBV AB 012 T: 105 dBV AB 012 T: telepowered TYPE OF CONNECTOR F(f)-F(m) F(f)-F(m) MODEL ABF 012 AB 012 T REF. 85053 85025
Frequency band: MHz AT 323: Regulation margin: 3 - 23 dB AT 020: Impedance: 75 Ohm. Regulation margin: 0 - 23 dB AT 323 TYPE OF CONNECTOR IEC (f)-IEC (m) IEC (f)-IEC (m) MOD. AT 323 AT 020 REF. AT 020
Frequency band: 5 to 2150 MHz Return losses: -10 dB Through losses: 0,5 to 20 dB DC pass (0-22 KHz): 1A TYPE OF CONNECTOR F(f)-F(m) MOD. ATF 020 REF. 85050

FIX ATTENUATOR

Frequency band: 5 to 2300 MHz Losses: 10 dB Return losses: 10 dB Impedance: 75 Ohm. DC block TYPE OF CONNECTOR F (m)-F (f) MOD. FAT 010 REF. 85041
Coaxial resistive load for loading open connectors. (SCM 5000, 6000 and 7000 series). TYPE OF CONNECTOR F (m) MODEL CX 75 F REF. 84011
TWO WAY SPLITTER COMBINER
Band coverage: MHz Impedance: 75 Combining losses: 4 dB Output isolation: 22 dB TYPE OF CONNECTOR 2 x IEC (f) - 1 x IEC (m) MODEL MB 021 REF. 85001
Band coverage: MHz Impedance: 75 Combining losses: 4 dB Output isolation: 22 dB TYPE OF CONNECTOR 2 x IEC (m) - 1 x IEC (f) MODEL DB 012 REF. 85002
Band coverage: MHz Impedance: 75 Combining losses: 4 dB Output isolation: 22 dB TYPE OF CONNECTOR F (f) MODEL MD 012F REF. 85028
Rigid 75 coaxial bridge for splitting or combining RF signals. Raster: 48 mm. (Ref. 84031 y 84003) Multi-processing system Raster: 40 mm. (Ref. 84034) Nexum system TYPE OF CONNECTOR F (m) - F (m) F (m) - F (m) MODEL PMD FF PMD FFN REF. 84031 84034

PMD FF N

F ADAPTOR
Female-female F adapter (MHz). TYPE OF CONNECTOR F(f)-F(f) MODEL ADF HHS REF. 84016
Frequency band: 470 to 862 MHz In band return losses (out of notch filter): >10 dB Rejection at central frequency (Fc): 18 dB at 470 MHz / 10 dB at 862 MHz Rejection at Fc 12 MHz: 2 dB In band through losses: <1 dB DC pass: 1 A TYPE OF CONNECTOR F(f)-F(m) MODEL FTF 245 REF. 85052
Insertion losses: <1 dB Attenuation: 20 dB Outband attenuation: 1 dB Selectivity: 2 dB (12 MHz) Thermal drift: 20 KHz / C TYPE OF CONNECTOR F(f)-F(m) MODEL FT 130 F REF. 85023
Insertion losses: <1 dB Attenuation: 20 dB Selectivity: 2 dB (12 MHz) Thermal drift: 20 KHz / C TYPE OF CONNECTOR F (f)-F (m) MODEL FT 110 F REF. 85030

HIGH PASS FILTER

Passage band: 470 to 1000 MHz Insertion losses: 1,5 dB Return losses: 10 dB Impedance: 75 Ohm. TYPE OF CONNECTOR F (m)-F (f) MODEL FPA 470 REF. 85042
Frequency band: 5 to 2150 MHz Return losses: -10 dB Through losses: 0,5 dB DC pass: 1A TYPE OF CONNECTOR F(f)-F(m) MOD. ICF 001 REF. 85051

LOADING RESISTOR

75 resistor suitable for loading unused inputs/outputs. TYPE OF CONNECTOR MODEL RC 075 REF. 85010
Technical Notes... PRODUCT INDEX Alphabetical index (models).. Numerical index (ref. numbers)..

TECHNICAL NOTES

CHANNEL DEFINITION
CHANNEL LIMITS MHz 52,5 - 59,- - - 181 182,5 - 189,- - - - - 230 48,5 - 56,- - - - - - - - - - - 230 PICTURE CARRIER MHz 53,75 62,25 82,25 175,25 183,75 192,25 201,25 210,25 217,25 224,25 49,75 59,25 77,25 85,25 93,25 175,25 183,25 191,25 199,25 207,25 215,25 223,25 AUDIO CARRIER MHz 59,25 67,75 87,75 180,75 189,25 197,75 206,75 215,75 222,75 229,75 56,25 65,75 83,75 91,75 99,75 181,75 189,75 197,75 205,75 213,75 221,75 229,75

STANDARD B

Pv dB 16 dB Sc Ps dB Ps 2

TV BAND Standard B

CHANNEL Italy A B C D E F G H H1 H2 OIRT I II III IV V VI VI VIII IX X XI XII Ireland A B C D E F G H I J France 10

BI B (II) B (III)

4,43 MHz 0,75 MHz 5,5 MHz 5,74 MHz 7 MHz 0,25 MHz

Standard D BI

B (II) BIII

STANDARD G

Standard I BI
44,5 - 52,5 52,5 - 60,5 60,5 - 68,- - - - - - - 230
45,75 53,75 61,75 175,25 183,25 191,25 199,25 207,25 215,25 223,25
51,75 59,75 67,75 181,25 189,25 197,25 205,25 213,25 221,25 229,2

1,25 MHz

16 dB Sc

Ps dB Ps 2

4,43 MHz 5,5 MHz 5,74 MHz 8 MHz 1,25 MHz

Standard L BI

49,00 - 57,00 53,75 - 61,75 57,00 - 65,00 174,75 - 182,75 182,75 - 190,75 190,75 - 198,75 198,75 - 206,75 206,75 - 214,75 214,75 - 222,75