Opvaskemaskine LF-65 IT

PV IMPORT a/s GRSDALSVEJ VIBORG

www.fagor.com

FAGOR IT 2004 STANDARD-DELUXE

DATE:20-FEBRUARY-2004

Notes on PROGRAMMES: C Alternate wash RE1 Electronic regeneration R AS AL EX NEX RFT TUR Temperature mantained at -3 Dirty water Clean water Top Express runs if selected NO Top Express runs if Express is not selected Water cloudiness measured in last second Water cloudiness measured in last second

PROGRAMMES

5 b7 b6

FUNCTIONS

b5 b4 b3 b2 b1 b0

OTHERS S

USAGER
NORMAL/AUTOMATIC 55 or 65C-72C*

OUTPUTS

CONDITION FOR STEP

MOTOR DISTRIBUTOR CYCLE

PPROGRAMME STEP

PROGRAMME STEP

DETERGENT / RINSE AID

REGENERATION VALVE

QUICK 55C / EXPRESS

BASIC FUNCTION

F=50Hz TDS1 = 0,84 sec TDS2 = 1,25 sec TDS3 = 1,67 sec TDS4 = 2,10 sec Lower Open Closed Closed 1/2 Open
F=60Hz TDS1 = 0,70 sec TDS2 = 1,04 sec TDS3 = 1,40 sec TDS4 = 1,67 sec Upper Closed Open 1/2 Open Closed C 50s 50s Fill/drain position 10s 10s

HEATING ELEMENT

TIME ADJUSTMENT

INTENSIVE 70C

ENDURANCE

DRAIN PUMP

WASH PUMP

MOTOR FAN

RELIABILITY

MIXED 50C

FILL VALVE

PREWASH

ECO 50C

RUNNING

DS2 DS3 DS1 DS4
MN empty 30 sec DSsec 15 sec MN full 5 min 3 min 12 min

55 C and 10 min

AS AS AS AS AS AS AS AS AS AS AS AS DSsec 15 sec MN full DSsec 15 sec MN full 1 min 75 C
68 C and 12 min 65 C and 17 min 55 C and 12 min 52 C and 15 min 55 C and 10 min 40 C and 5 min
AS AL NEX EX RE1 RE1 RE1 RE1 RE1

RE1 RE1

52 C and 22 min
C C C C C C C C C R C C C C C C
15 min 5 min 10 min NEX 3 min DS3 MN empty 10 sec 40 sec 20 sec

RE1 RE1 RE1 RE1 RE1

RINSE I
NEX NEX NEX NEX NEX NEX NEX NEX NEX
DSsec 15 sec MN full 6 min DS3 MN empty 10 sec 20 sec FILL WASH DRAIN
DSsec 15 sec MN full 75 C NEX EX
65 C and 8 min 55 C and 6 min 40 C and 4 min
1 min 4 min 2 min 65 C 68 C NEX 30 sec DS3 MN empty 20 sec

C C C C C C C C C C

NEX 10 min 30 min 14 min 2 min 1 min DRY

END OF PROGRAMME

DS3 MN empty 20 sec 30 min RESTART STOP DRAIN

END PROGR.

Strictly speaking, STOP is not a step condition. It means that the step counter is placed on hold. Strictly speaking, RESTART is not a step condition. It means the step counter goes to O.

RINSE II

HEATING ELEMENT: The heating element is connected until the step condition temperature setting is reached. It is then switched off. If the step condition includes another type of condition (e.g. time) apart from a temperature setting:.- when the temperature setting is reached, the heating element switches off.- except when R is indicated, in which case the temperature regulation is done with hysteresis.

MN full means the level micro switch is indicating full (contact closed).

TUR AS AS AS AS

SENSOR L.
MN empty means the micro switch level is indicating empty (contact open).
75 C 1 min 15 sec DS3 MN empty 10 sec 20 sec DS3 MN empty 10 sec 20 sec

C C C C C C

FOR INTENSIVE, AUTOMATIC AND MIXED PROGRAMMES THE CLOUDINESS SENSOR MUST BE READ ON PREWASH. TO DECIDE WHETHER TO USE THE SAME WATER FOR WASHING. ON AUTOMATIC IT WOULD ALSO WASH AT 55 OR 65.

RFT RFT

C Fagor Electrodomesticos, S. Coop.
Notes on STEP CONDITIONS: DS1, DS2, DS3 and DS4 are the four preset stopping positions for the distributor. They are all set as the position the distributor reaches 0.1 seconds after a single micro switch contact has opened, and they are differentiated by the time this contact remains closed. The nominal contct closing times preceding each stopping position are as follows: The motor distributor completes a full turn in 15 seconds.

TUR. SENSOR

Look the elctronic card inthis position to analyze this electric diagram:

2 MN R

DD / DT
NTC R_RESISTANCE M-WASH MOTOR C_CONDENSER IG_MAIN SWITCH EB_DRAIN PUMP TS_SAFETY THERMOSTAT 85 MVS_DRYING VENTILATOR MD_DISTRIBUTOR MOTOR SD_DISTRIBUTOR SIGNAL MP_DOOR MICROSWITCH MN_NORMAL MICRO MS_SAFETY MICRO EVR_REGENERATION VALVE MPR_PRESSURE MICRO DD/DT DOSIFIER FOR DETERGENT AND RINSE-AID EVLL_WATER INTAKE VALVE Ins_SALT SWITCH InT_RINSE-AID SWITCH

CARD 2004 ELECTRON.IT

Signal IG
906012567 [LF-65IT] - FAGOR - 03-05-2007 Pos. 111 Reference V53B000T0 V53B000U6 VF9B000A5 VF9B000B1 LV0860500 V87B000C0 V66B000B5 VA9B000D3 LV0861600 VA9B000E9 VA9B000G1 V19C000D7 V53B000A0 V53B000C2 V53B000V2 V53B000W8 V19C000B6 V21B000B3 VE8A000M5 VC5A000E3 VC5A000F9 VE5A001F8 VE5A001G4 V09B000N3 V67A002I3 V27M000B4 V27M001B2 V72B000G9 V87A000E5 VF6A000I1 VC4B000A9 VC4B000B5 VF0000026 V64I000H5 VB3B000B1 LQ1A000A1 VH7A000I1 V77I000E6 VL4S000E2 VH2A000F5 VH2A000E9 VH2B000B8 VC5A000G5 LV0655100 LV0860300 V87A000S6 VG8A000U3 Z02K039A4 Z02K041A7 VH2A000H7 VH2B000F1 LV0655900 LV0655200 V24A000Z0 VI8I000F3 V36H000A6 V35A002A3 V23A000E0 VJ7A000N1 LV0861200 VC6A000D5 LV0656700 V87B000E1 VH6I000D0 V23I000C5 V12B001C9 VJ1A000J1 VC8B001A8 V99I000H1 Description EXTENSION EXTENSION GUIDE RAIL GUIDE RAIL MOTOR UNIT SEAL CATCH BEARING GUIDE RAIL UNIT END STOP END STOP COVER SIDE PANEL SIDE PANEL SIDE PANEL SIDE PANEL EXTENSION ADJUSTABLE FOOT PAN SEAL FIXING FILTER FILTER UNIT DOOR CLOSURE DOOR CONTROL PANEL CONTROL PANEL DOOR SEAL SEAL SPRING MOVING HINGE MOVING HINGE INSIDE DOOR FEEDER LOWER DOOR SEAL BENDER DRAIN PIPE WATER INTAKE HOSE DISTRIBUTOR CAP NUT DECALCIFIER SEAL SEAL NON-RETURN UNIT SEAL INNER PIPE SCREW SCREW AIR BREAK UNIT NUT REED SEAL PAN PIPE FILTER SWITCH POWER CABLE MICRO LEVELLING UNIT PUMP UNIT SUPPORT WOBBLER SEAL CONDENSER MICRO HEATER UNIT CUTLERY HANDLE DRAIN PUMP From Until

20-03-2006 20-03-2006

20-04-2007 21-04-2007

Pos. 250

Reference VC8B003A4 LV0860450 VH1A000N3 VE2A000J0 VH5A000B5 VD9A000L1 V58X000C8 VJ7A000L0 LV0859903 LV0655300 LV0656100 V23I000E6 VL1A000A1 VK9A000A8 LV0162600 VJ7A000P3 V54L001A4 V58X000D3 VE7B000A3 V09C000B0 V92B000C7 Z02K037A8 Z02K042A5 LV0656200 LV0654800 LV0653800 VE4A000G9 VE4A000H5 VA5A000K6 VJ1A000E2 VI6B000I4 V92B000A5 V92B000B1 VA5A000M8 LV0657100 LV0657200 V03E000A8 V19C000F9 V01M000B5 V19C000A0 LV0656300 VF2B000B6 VJ8A000N9 VJ8A000P1 VJ8A000M4 VC8A000M4 LV0655600 VC4B000C1 VF9B000C7 V80B000D0 V28F011H0 V28F011I5 LV0657700 LV0657800 VE8A000N0 VJ1A000K7 VC4B000F8 VL8A000B2 VC4B000E2 V87B000B4 V87A000Z7 VK2A000C5 Z02K038A6 VH7A000H6 V21B000C9 V19C000C2 VC8B002A6 V87B000D5 V21B000I3 V21B000H8 LV0858700
Description FOLDING ADJUSTABLE BSKT.WHEEL UNIT LOWER BASKET WHEEL FUNNEL CUTLERY KEY LEVER ACCESSORY UNIT O-RING SUPPORT MICRO GRILLE SUPPORT SEAL FLOAT ELECTRNC. CIRCUIT KEY FIXING SPRING SPACER SCREW SCREW THERMOSTAT ELECTROVALVE REED SHAFT SUPPORT PIPE SUPPORT FIXING HINGE HINGE DISTRIBUTOR SPRING SELECTOR SWITCH SUPPORT COVER EMBELLISHER BASE SUPPORT SPRINKLER LIFTING UNIT LIFTING UNIT WHEEL SUPPORT THERMOACTUATOR SPACER REGULATOR TEMPLATE USER MANUAL USER MANUAL CONNECTOR CONNECTOR SUPPORT ROD CORD PROTECTOR FASTENING SEAL SEAL COVER SCREW EXTENSION MECHANISME COVER HANDLE SEAL NUT SHAFT SEAL

Pos. 262

Reference LV0702200 V72C000A0 V72C000B6 LV0860000 V02A000C9
Description TAPE EXTENSION EXTENSION PROTECTOR COUNTERWEIGHT

Opvaskemaskine LF 019SX

PV IMPORT a/s GRSDALSVEJ VIBORG

Length

PJ1 - 2.5 colour N BLACK 1 BLUE 2 GREEN 3 0.0.0.35 1710
PJ2 Colour N BROWN 4 BLUE 5 BLUE 6
1.5 1.5 1.5 BROWN 1.RED 0.9 WHITE(SN) 1.WHITE (SN) 1.5

STOCKO CONNECTOR

PJ3 Colour N 11 RED 12 BROWN WHITE 13 WTHIE PINK PINK 16 BLUE 17 BLUE 18
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5

500 500

STOCKO CONNEC.

CONNECS.

ELBI CONNEC.

DISPLAY CARD

C Fagor Electrodomesticos, S. Coop.
STOCKO CONNECTOR STOCKO CONNECTOR
PJ4 Colour N 19 WHITE 20 WHITE 21 BROWN 22 BROWN 23 ORANGE 24 ORANGE 25 GREEN 26 GREEN

665 665

SIGNAL COMMUN MOTEUR
VISIBLE SIDE TRANSPARENT P.V.C
PJ5 - 2.5 Colour N 27 BLACK BLACK GREEN GREEN 30 BLUE 31 BLUE 32
0.35 0.35 0.35 0.35 0.35 0.35
PJ6 Sec. Length Colour N ORANGE 33 0.WHITE 0.34 YELLOW 0.35

Colour

BLUE BLUE

www.fagor.com

PJ7 N 36 37

0.5 0.5

540 540
PJ8 - 2.5 Colour N RED 38 GREEN 39 WHITE 40

0.0.0.35 570

WHITE WHITE

VJ2 N 41 42

350 350
CLOUDINESS SENSOR FAN ALTERNATIVE VALVE DETERGENT/RINSE AID DISPENSER FILL VALVE LOCKING CLAMPS FOR 4 mm. DIAM. HOLE REGENERATION VALVE SAFETY MICRO STANDARD MICRO SWITCH DOOR MICRO SWITCH WATER PRESSURE MICRO SWITCH MICRO SWITCH NUMBERING HEATING ELEMENT DRAIN PUMP CONDENSER WASH PUMP CONNECTOR SALT INDICATOR STOCKO CONNECTOR RINSE AID INDICATOR SAFETY THERMOSTAT CONNECTOR BLOCK TANK EARTH FLOW THROUGH HEATER DOOR EARTH WASH PUMP EARTH SUPPLY EARTH
FAGOR INNOVATION 2006 ECO - ALTA

PROGRAMMES

VERSION:

DATE :

11/01/2006

FUNCTIONS

OUTPUTS

CONDITION FOR STEP

PROGRAMME STEP

OTHERS

MOTOR DISTIRBUTOR CYCLE

DOUBLE INTENSIVE 7 0C

DETERGENTE - RINSE AID

REGENERATION VALVE

NORMAL 65 AUTOMATIC 55C-65C

AUTOMATIC 55C-65C

HEATING ELEMENT

CHECK 55C

DRAIN PUMP

RELIABILITY

RUNNING

PREWASH

TEMP [C]

TIME (seg) 30

ACT MNV TF DS2 TF TF MNI TIME_TEMP TF MNV TF TF TF MNI TF TF TF TIME_TEMP TEMP TF TF DS2 MNV TF TF DS2 TF TF MNI TF TEMP TIME_TEMP TIME_TEMP TIME_TEMP TIME_TEMP TIME_TEMP TIME_TEMP TIME_TEMP TF TIME_TEMP TF TF TF TF TF DS2 MNV TF TF TF DS2 TF TF MNI TF DS2 MNV TF TF DS2 TF TF MNI TF DS2 MNV TF TF DS2 TF TF MNI TEMP TIME_TEMP TF TIME_TEMP TIME_TEMP TIME_TEMP TF TF TEMP TEMP TEMP TEMP TF DS2 MNV TF TF TF TF TF TF DS2 MNV TF TF REIN IO STOP DRAIN

TIME ADJUSTMENT

HIGYENIZER 75C

INTENSIVE 70C

DELICATE 45C

EXPRESS 40C

ENDURANCE

WASH PUMP

MOTOR FAN

MIXED 50C

FILL VALVE
TUR AS AS AS AS TUR AS AS AS AS AS AS AS AS TUR AS AS AS AS AS AS AS AS TUR AS AS AS AS AS AS AS AS TUR AS AS AS AS TUR AS AS AS AS

V V V V V V

C C C C C C

WASH 1

49 AS AS AS AS AS AS AS AS

AS AS AS AS FILL

AS | NE+ AL | E+
V V V V V V V V V V V V V V V V
C C C C C C C C C C C C C C C
RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1
RE? 4:1 RE? 4:1 RE? 4:1 RE? 4:1

RINSE I

360 FILL WASH DRAIN

RINSE II

RINSE III
4:1 4:1 4:1 4:1 NE+ 4:1 4:1 4:1 4:1 4:FILL

E+ NE+

V V V V V V V V V V V V V
C C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1 C1

98 RT RT RT RT RT

60 DRY

END OF PROGRAMME

93 DRAIN END PROGR 98
Notes on PROGRAMMES: R Temperature mantained at -3C C Alternate wash 10s/50s C1 RE Electronic regeneration RT Short wash AS Dirty water AL Clean water RFT Water cloudiness TUR Water cloudiness 4:1 4-in-1 option activated E+ ECO PLUS option activated NE+ ECO PLUS option not activated
Programme Express 40. Alter loading it only washes with the upper distributor, DS3 Notes on STEP CONDITIONS DS1, DS2, DS3 and DS4 are the four preset stopping positions for the distributor. They are all set as the position the distributor reaches 0,1 seconds after a single micro switch contact has opened, and they are differentiated by the time this contact remains closed. The nominal contact closing times preceding each stopping position are as follows : : The motor distributor completes a full turn in 15 seconds F=50Hz TDS1 = 0,62 - 0,93 se TDS2 = 1,00 - 1,35 se TDS3 = 1,45 - 1,80 se TDS4 = 1,85 - 2,20 se Lower Open Closed 1/2 Open Closed F=60Hz TDS1 = 0,51 - 0,77 sec TDS2 = 0,83 - 1,12 secc TDS3 = 1,21 - 1,50 sec TDS4 = 1,54 - 1,83 sec C 50s 50s 10s 10s
SALT REGENERATION (Regeneration EV) When Option 4 EN 1 is activated:.- Subtract 1 from the Regeneration value entered by the User (and store on Power Board-M).- The value entered by the User will appear on the Interface Board (Slave).

BASIC FUNCTION

4-in-1:
When this option is activated:
- Skips the RINSE III step - On WASH 1 phase.-THE NON-REGENERATION MODELSskip this step.-THE REGENERATION MODEL.performs the step according to the SALT REGENERATION note.

CHECK COMPILE

DS2 DS3 DS4 DS1
Closed Open Closed 1/2 Open

Fill/drain posit.

Lower DS2 Open DS3 Closed DS4 1/2 Open DS1 Closed
Upper Closed Open Closed 1/2 Open

C1 60s 120s 0s 0s

MN full means the level micro switch is indicating full (contact closed) V ( Monitoring ) : When the MN is full, if this signal is lost , the fill valve is activated until the contact closes again MMN empty means the micro switch level is indicating empty (contact open)

Strictly speaking, STOP is not a step condition. It means that the step counter is place Strictly speaking, RESTART is not a step condition. It means the step counter goes to 0
FOR SUPER INTENSIVE, INTENSIVE, AUTOMATIC AND MIXED PROGRAMMES THE CLOUDINESS SENSOR MUST BE READ ON PREWASH, TO DECIDE WHETHER TO USE THE SAME WATER FOR WASHING ON AUTOMATIC IT WOULD ALSO WASH AT 55 OR 65 IF IT DOES NOT HAVE A SENSOR, THE AS STEPS ARE PERFORMED HEATING ELEMENT The heating element is connected until the step condition temperature setting is reached. It is then switched off. If the step condition includes another type of condition (e.g. time) apart from a temperature setting:.- When the temperature setting is reached, the heating element switches off.- Except when R is indicated, in which case the temperature regulation is done with hysteresis

NEUTRAL LINE

HEATER PRESSURE-SW

RAST-516A

WASHING_ PUMP

DETERGENT

ICDIS-DRV FAN-DRV EVF-DRV EVR-DRV DET-DRV WP-DRV 10 1C 2C 3C 4C 5C 6C 7C GND ULN200A4 COM 1B 2B 3B 4B 5B 6B 7B 8
LINE DRAIN-PUMP SAFETY SWICH NEUTRAL

EV-FILL

EV-REG

DISTR_POS

DISTRIBUTOR LINE

LINE DRYING_FAN

N12372
906012941 [1LF-019SX] - FAGOR - 02-04-2007 Pos. 113 Reference LV0861000 V53B000T0 V53B000U6 VF9B000A5 VF9B000B1 LV0860500 V87B000C0 V66B000B5 VA9B000D3 VA9B000H7 VA9B000E9 VA9B000G1 V19C000D7 V53B000G5 V53B000L4 V19C000B6 V21B000A7 VE8A000M5 VC5A000E3 VC5A000F9 VE5A001F8 VE5A001G4 V09A000P9 V67A002F6 VF8A000N6 V70R146R8 V58X000R5 V72B000G9 V87A000E5 VF6A000G0 VC4B000A9 VC4B000B5 VF0000026 V64I000H5 VB3B000B1 LQ1A000A1 VH7A000I1 V77I000E6 VL4S000E2 VH2A000F5 VH2A000E9 VH2B000B8 VC5A000G5 LV0655100 LV0860300 V87A000S6 VG8A000U3 Z02K039A4 VH2B000G7 VH2B000F1 LV0655900 LV0655200 V24A000Z0 VI8I000F3 V36H000P3 V35A002A3 V23A000E0 VJ7A000N1 LV0861200 VC6A000D5 LV0656700 V87B000E1 VH6I000D0 V23I000C5 V12B001C9 VJ1A000J1 V99I000H1 VC8B000F9 VC8B003A4 Description HOTPLATE EXTENSION EXTENSION GUIDE RAIL GUIDE RAIL MOTOR UNIT SEAL CATCH BEARING RACK GUIDE RAIL END STOP END STOP COVER SIDE PANEL SIDE PANEL EXTENSION ADJUSTABLE FOOT PAN SEAL FIXING FILTER FILTER UNIT CLOSURE UNIT DOOR PLINTH CONTROL PANEL KEY DOOR SEAL SEAL SPRING MOVING HINGE MOVING HINGE INSIDE DOOR FEEDER LOWER DOOR SEAL BENDER DRAIN PIPE WATER INTAKE HOSE DISTRIBUTOR CAP NUT DECALCIFIER SEAL SEAL NON-RETURN UNIT SEAL INNER PIPE SCREW AIR BREAK NUT REED SEAL PAN PIPE FILTER SWITCH POWER CABLE MICRO LEVELLING UNIT PUMP UNIT SUPPORT WOBBLER SEAL CONDENSER MICRO HEATER UNIT CUTLERY DRAIN PUMP UPPER BASKET FOLDING ADJUSTABLE From Until

20-03-2006 20-03-2006

Pos. 268 269
Reference VH1A000N3 VE2A000J0 VH5A000B5 VD9A000L1 V58X000E9 VJ7A000L0 LV0655300 LV0656100 V23I000E6 VL1A000A1 VK9A000A8 LV0162600 V03E000D5 VJ7A000P3 V54M006A9 VE7B000A3 LV0861300 V92B000C7 Z02K037A8 Z02K042A5 LV0656200 LV0654800 LV0653800 VE4A000G9 VE4A000H5 VA5A000K6 VJ1A000E2 V92B000A5 V92B000B1 VA5A000M8 V19C000F9 V19C000A0 LV0656300 VA5A000E1 VF2B000B6 VJ8A000N9 VJ8A000P1 VJ8A000M4 VC8A000M4 LV0655600 VC4B000C1 VF9B000C7 V28F013A5 VE8A000N0 VJ1A000K7 VC4B000F8 VL8A000B2 VC4B000E2 V87B000B4 VK2A000C5 Z02K038A6 V21B000C9 V19C000C2 VC8B002A6 V87B000D5 V21B000I3 V21B000H8 VH2B000E5 VG8A000X0 LV0858700 VB3B000C7 V72C000A0 V72C000B6 V02A000C9 V58X000F5 V58X000G1 V54M000A2 V81A000E8 V10J000A9 V10J001J9
Description LOWER BASKET WHEEL FUNNEL CUTLERY KEY LEVER O-RING SUPPORT MICRO GRILLE SUPPORT SEAL COVER FLOAT CONTROL CIRCUIT FIXING LEVER SPACER SCREW SCREW THERMOSTAT ELECTROVALVE REED SHAFT SUPPORT PIPE SUPPORT HINGE HINGE DISTRIBUTOR COVER BASE SUPPORT DISTRIBUTOR UNIT SPRINKLER LIFTING UNIT LIFTING UNIT WHEEL SUPPORT THERMOACTUATOR SPACER REGULATOR USER MANUAL SUPPORT ROD CORD PROTECTOR FASTENING SEAL COVER SCREW MECHANISME COVER HANDLE SEAL NUT SHAFT FAN COVER SEAL SUPPORT EXTENSION EXTENSION COUNTERWEIGHT KEY KEY POWER CIRCUIT GUIDE RAIL CONNECTOR ELECTRICAL INSTALLA