Fantom Twister FM760 Manual
Fantom Twister FM760 - Instruction Manual, size: 7.3 MB
Here you can find all about Fantom Twister FM760 like manual and other informations. For example: review.
Fantom Twister FM760 manual (user guide) is ready to download for free.
On the bottom of page users can write a review. If you own a Fantom Twister FM760 please write about it to help other people. [ Report abuse or wrong photo | Share your Fantom Twister FM760 photo ]
User reviews and opinions
|seisner||6:23am on Friday, June 4th, 2010|
|Powerful, Bagless, HEPA Filter. Loud powerful suction, on board tools, carpet height adjustment not good at edge cleaning Cleans well, manoeuvres easily, telescoping wand worthwhile, long cord and fairly quiet. Dust bin makes a mess.|
|cjalmeida||7:21pm on Thursday, March 18th, 2010|
|It was a Gift. There are no pros. CHEAP!LOOSES AIR FLOW AT 1/2 FULLdoes not do bare floors well.|
Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.
INSTRUCTION MANUAL VACUUM CLEANER
IMPORTANT SAFETY INSTRUCTIONS NAME OF EACH PART PREPARATION BEFORE USE USING THE VACUUM CLEANER USING THE ATTACHMENTS EMPTYING THE DUST COMPARTMENT CLEANING THE FILTERS CLEARING BLOCKAGES IN THE SUCTION HOSE AND CLEANING THE AGITATOR ASSEMBLY REPLACEMENT INSTRUCTIONS TROUBLESHOOTING REPLACEMENT PARTS LIMITED WARRANTY 16 17
HOUSEHOLD USE ONLY
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be followed, including the following. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING - To reduce the risk of fire, electric shock or injury:
1. Do not leave the vacuum cleaner when plugged in. Unplug it from the outlet when not in use and before servicing. 2. Do not use outdoors or on wet surfaces. 3. Do not allow it to be used as a toy. Close attention is necessary when used by or near children or infirmed persons. 4. Use only as described in this manual. Use only the manufacturer's recommended attachments. 5. Do not use with a damaged cord or plug. If the vacuum cleaner is not working as it should, or if it has been dropped, damaged, left outdoors or dropped into water, return to FANTOM at 178 West Service Rd., Champlain, NY 12919. 6. Do not pull or carry by the cord, use the cord as a handle, close a door on the cord, or pull the cord around sharp edges or corners. Do not run the vacuum cleaner over the cord. Keep the cord away from heated surfaces. 7. Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord. 8. Do not handle the plug or the vacuum cleaner with wet hands. 9. Do not put any objects into the openings. Do not use with any opening blocked: keep free of dust, lint, hair and anything that may reduce air flow. 10. Keep hair, loose clothing, fingers and all the parts of your body away from openings and moving parts. 11. Do not pick up anything that is burning or smoking, such as cigarettes, matches or hot ashes. 12. Do not use without dust compartment and filters in place. 13. Turn off all controls before unplugging. 14. Use extra care when cleaning on stairs. 15. Do not use to pick up flammable or combustible liquids such as gasoline, or use in areas where they may be present.
16. Do not touch the agitator while it is spinning. 17. Do not place any heavy items on top of the vacuum cleaner. 18. Do not step on the hose or pull it too strongly. 19. Do not pick up items such as pieces of waste paper or cloth which look as though they may cause the hose to become blocked. 20. Do not clean or store the vacuum cleaner in places where there are high temperatures. 21. Store the vacuum cleaner away from excessive humidity. 22. When carrying the vacuum cleaner, hold it by the carrying handle. 23. Before servicing the vacuum cleaner, allow all metal parts to cool first. 24. Always place foot on handle release when adjusting the handle position of the vacuum cleaner. 25. If the supply cord of this appliance is damaged, it must only be replaced by FANTOM , because special purpose tools are required.
SAVE THESE INSTRUCTIONS
This vacuum cleaner is intended for household use only.
Note to user concerning attachment plug:
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way.
NAME OF EACH PART
Release Button C
Suction Hose Release Button A Cord Storage Hooks Release Button B
ON/OFF Switch Crevice Tool Release Button D Upholstery Tool
Dust Compartment Dusting Brush
Filter Cover Wand
Power Cord Power Cord Plug Height Adjustment Headlight Lever Handle Release Lever Set the ON/OFF switch to " ON " to light the headlight.
Rug/Floor (Tools) SELECTOR
Operate vacuum cleaner only at the voltage specified on name plate.
PREPARATION BEFORE USE
Caution: Do not connect the power cord plug to the wall outlet until assembly is completed.
Attaching the handle
Set the vacuum cleaner 1 to the upright position. lnsert the 2 as shown handleillustration. in the
Attaching the suction hose & attachments
Hose Hook Upholstery Tool
WINDING THE POWER CORD
Hook the power cord over 1 the clip which is located on the upper cord storage hook as shown.
Wind the power 2 storage hooks. cord around the cord
Secure the power cord plug on the power cord.
Cord Storage Hooks
RELEASING THE POWER CORD
Rotate the 1 downward.upper cord storage hook to the 2 Return the hook before upright position attempting to rewind the power cord. Upper Cord Storage Hook
INSERTING THE POWER CORD PLUG
WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way.
USING THE VACUUM CLEANER
Start or stop vacuum cleaner by pushing on the switch.
ADJUSTING THE HANDLE
The handle of this vacuum cleaner can be set to one of three positions -Upright, Normal or Parallel. Place your foot on handle release lever as shown and pull back on the handle until it releases from its upright position.
Handle Release Lever
The handle is normally locked in this position for storage or when using the attachments. Push the handle forward until it locks.
This position is used for normal cleaning.
This position is used for cleaning under furniture.
HEIGHT ADJU STMENT LEVE R
Height Adjustment Lever The nozzle head can be adjusted to four different height settings.
Before using the height adjustment lever,please make sure the nozzle head is tilted backward from the floor.
Set the height adjustment to the appropriate carpet length. Use the 3 rd( setting. Use the 4 th( setting. )height
The RUG/FLOOR(TOOLS)selector should only be adjusted while the vacuum cleaner is turned on RUG Position and in the upright position. When cleaning a rug or carpet,first turn the ON/OFF switch to the ON position,and then set the RUG/FLOOR(TOOLS)selector to the RUG position.
2 When cleaning a bare floor or when using one of the attachments, set the RUG/FLOOR
EDGE CLE AN ING
RUG/FLOOR(TOOLS)selector (TOOLS)selector to the FLOOR position. Caution: Do not change the setting of the RUG/FLOOR(TOOLS)selector while the vacuum cleaner is turned off.
This vacuum cleaner is equipped with an "edge cleaning" function for cleaning carpet edges near baseboards and stationary furniture.
USING THE ATTACHMENTS
Caution: When using one of the attachments during cleaning,set the vacuum cleaner to the upright position.
the attachments from the 1 Removecleaner. vacuum 2 Press the release button C to disconnect the handle from the vacuum cleaner.
Wand Crevice Tool
Caution: When removing the attachments,pull them in the directions shown in the Upholstery Tool illustration.Pulling them in the wrong direction or pulling them forcefully may cause damage to the attachment clamp.
Dusting Brush Attachment Clamp
3 Attach the attachments on the handle.
Attach the attachments as shown below.
Upholstery Tool Suction Hose Dusting Brush
When you have finished using the attachments,replace them in their original positions as shown on page 4.
EMPTYING THE DUST COMPARTMENT
Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before cleaning.
Empty the dust compartment when contents reach the MAX mark.
Press the release button A meanwhile press the release button B to remove the dust compartment. Release Button A Release Button B
Press the release lever to open the trapdoor. Release Lever
Turn the handle 4 direction spinnerto emptyseveral times in the shown the dust compartment.
Trapdoor Spinner Handle
Reattaching the Dust Compartment
Close the trapdoor and insert the the dust 1 dust compartment into the grooveprojection onbody. 2 Push the body compartment into on the main the main as shown to reattach.
CLEANING THE FILTERS 1 Remove the dust compartment.(refer to page 9) Set the dust compartment to the 2 position.Open the trapdoor,then parallel push the
release button E and pull out the main filter. The main filter and prefilter will be removed at the same time. Caution: Do not push the release button E at the upright position. As this may drop or damage the main filter and prefilter. the and prefilter with 3 Clean bothmain filterdry completely. a soft-bristled brush and rinse with cold water. Allow items to Caution: Do not use a hard-bristled brush to clean filters. This may result in damage to the filters. Do not attempt to dry with a hair dryer or by placing in a clothes dryer.Hot air may cause the filters to warp. Release Button E
To maintain optimum suction power, the dust filter fins should be kept clean of dirt. Clean the filter fins free of dirt with the forked end of cleaning utensil as shown.
Reattaching the filters
1 Insert the main filter into the prefilter as shown.
onto the main filter 2 Holddust compartment. and insert into the Align the ribs of the main filter to match the shape of the opening in the dust compartment and press firmly to insert.
3 Close the trapdoor.
CLEARING BLOCKAGES IN THE SUCTION HOSE AND CLEANING THE AGITATOR ASSEMBLY
Caution: Be sure to turn the ON/OFF switch to the "OFF" position and disconnect the power cord from the wall outlet before clearing any blockages in the suction hose and cleaning the agitator assembly.
Clearing blockages in the suction hose
Set the 1 Removevacuum cleaner to the upright position. the cuff from any from the hose. 2 then remove hoseblockagesthe suction inlet and Pull inspection cover out the bypass tube assembly. 3 pushthe dust dust clogging theaway from body and cuff to inlet,and dust inspection cover to the bypass tube assembly. 4 Reattach theonhose vacuum the suctioncheck that the Now switch the cleaner to
Suction Inlet Dust Inspection Cover Bypass Tube Assembly
the blockage has been properly cleared. If the hose is still blocked, the suction force will be weak.
Clearing blockages in the nozzle head
Remove the bottom plate (refer to page 14) Remove any blockages from the nozzle head. Reattach the bottom plate to the nozzle head,and then operate the vacuum cleaner to check that the blockage has been properly cleared. If the nozzle head is still blocked, the suction force will be weak.
Cleaning the blockage in the nozzle air inlet pipe
If the nozzle head still appears to be blocked, please clear the blockage in the nozzle air inlet pipe. Press release button F to remove the upper case. Remove the blockage in the nozzle air inlet pipe. Reattach the vacuum cleaner.
Release Button F Release Button F
Nozzle air inlet pipe Nozzle air inlet pipe
Caution: Make sure that the Release Button F is at the original position.
Cleaning the agitator assembly
When threads get caught in the agitator assembly, clean the assembly. Remove the bottom plate (refer to page 14). Remove threads caught in the assembly by cutting them with scissors. Scissors Threads
Caution: Be sure to turn the ON/OFF switch to the"OFF" position and disconnect the power cord from the wall outlet before replacing any of the parts below.
REPLACING THE HEADLIGHT LAMP
Set the vacuum cleaner to the parallel position.
2 Loosen the screws to remove the lens. 3
When removing the headlight lamp, be careful not to pull on the headlight lamp wiring. Lens
Remove the lamp by pushing it gently in the direction of the arrow and then turning it counterclockwise. Lamp
Push a new lamp gently into the socket and turn it clockwise to tighten it. Use a standard bayonet base appliance lamp rated at 120V and 15W (LAMP MAX.15W).
Caution: Be careful not to clamp the headlight lamp wiring.
the lens and fasten the screws.
REPLACING THE FLAT BELT
Remove the bottom plate. (refer to page 14) Lift out the agitator assembly,and then remove the flat belt from the motor shaft and the agitator pulley. Motor Shaft Flat Belt
Place a new flat belt onto the motor shaft and pulley. Motor Shaft
Flat Belt Pulley Place the agitator assembly into the grooves in the nozzle head, making sure that the new flat belt slides securely into the guide.
Caution: Install the flat belt so that it has no twists in it,and so that all components turn smoothly.
Reattach the bottom plate (refer to page 14)
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the parallel position and turn it over. Latch
Slide 2 of thethe latch in the direction arrow. Remove the bottom plate 3 the tabs as illustrated. by pulling
REATTACHING THE BOTTOM PLATE
as shown. the projection on the bottom 1 Insertthe groove on the nozzle headplate 2 Push the bottom plate Press into and set the bottom plate in place.
Bottom Plate Projection
Slide the latch in the direction shown.
Turn the vacuum over and place in the upright position.
Nozzle Head Height Adjustment Lever
REPLACING THE HEPA FILTER
Under normal usage, the HEPA Filter will not require replacement; however, vacuuming large amounts of extremely fine dust, powder or similar material over a long period of time may decrease airflow performance through the filter. If this occurs, it may become necessary to replace the HEPA Filter. Only use genuine FANTOM replacement filters.
Release button D
Press the release button D at points 1 and pull the filter cover away from the vacuum cleaner.
Remove the HEPA filter.
Caution: Do not attempt to wash the HEPA filter. Always replace the old filter with a new one.
a new filter with the seal 3 Insert inside HEPAvacuum cleaner. to the of the Reattach the filter cover. Caution: Be sure that seal on the HEPA filter is inserted towards the inside of the vacuum cleaner. The filter cover should be correctly oriented when it is reattached. Do not reattach it upside down.
If there is a problem with the vacuum cleaner, carry out the following checks to find the cause. If the problem still persists after the checks have been made, do not use the vacuum cleaner to prevent the possibility of an accident occurring. Turn the ON/OFF switch to the "OFF" position, disconnect the power cord from the wall outlet, and contact FANTOM Customer Service at 1-800-668-9600. Or visit our website at www.fantom.com Problem
The motor does not operate when the ON/OFF switch is set to the "ON" position. Suction force is weak.
The power cord plug is not securely inserted into the wall outlet.
Insert the power cord plug securely into the wall outlet.(refer to page 5 ) Empty the dust compartment. (refer to page 9) Remove the blockage. (refer to page 11) Remove the blockage. (refer to page 11) Clean the filters. (refer to page 10) Remove the blockage. (refer to page 11) Replace the flat belt. (refer to page 12 )
The dust compartment is full. The suction hose is blocked. The nozzle head is blocked. The filters are dirty. The nozzle air inlet pipe is blocked.
The agitator does not operate.
The flat belt is worn or broken.
TO ORDER REPLACEMENT FILTERS CALL 1-800-668-9600
ONE (1) YEAR LIMITED WARRANTY
FANTOM warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to In US: FANTOM, 178 West Service Rd., Champlain, N.Y. 12919
If the appliance is found by FANTOM to be defective in material or workmanship, FANTOM will repair or replace it free of charge. Proof of purchase date and $19.95 to cover the cost of return shipping and handling must be included. * Non-durable parts including, without limitation, dust cup filters, filters, belts, brushes and electrical parts which normally require replacement are specifically excluded from warranty. The liability of FANTOM is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any of its parts, which have been performed by a repair person not authorized by FANTOM. This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of FANTOM if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is FANTOM liable for incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. *Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package ATTENTION CUSTOMER SERVICE.
OWNERSHIP REGISTRATION CARD
Please fill out and mail the product registration card within ten (10) days of purchase in order to validate the foregoing Limited Warranty. The registration will enable us to contact you in the unlikely event of a product safety notification. By returning this card you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
RETURN TO FANTOM, 178 WEST SERVICE RD., CHAMPLAIN, N.Y. 12919
Model FM760 ____________________________________________________________________________________________ Appliance model ____________________________________________________________________________________________ Date purchased Name of store ____________________________________________________________________________________________ Owners name ____________________________________________________________________________________________ Address City State Zip Code
Printed in China
Yamaha TG55 SBV900 IC-F3-S EW1001F HQ8140 Silver 1604-VLZ PRO CF-5100 NS-333 Coolpix L19 107625-02 Kawai CL20 125 SX Asko 1595 UE46C7705WS WF8704FPA Easy 110 PDP-503HDE Headset H375 J3-20 Cyber-shot RX-V390 LD-S5811ST AQV12AWA SG343I Gzmg505US-GZ-mg505 09 Hoist Robokaddy 830CF CS-F34db4e5 DPL930VD RE-S201 Suunto S6 WA72145 81834 KDL-46V4800 Review R-904N F86050VI Iball Designer Escape 203 Aspire 8730 Station XXL Siemens MT50 Archiver GX-400 Omron E5AN RX-V2092 PS50C530 Axim X30 HP-3700 Exact TS-H653G Messenger ESD 7400 Smartst SRU2103 XL-MP150E Monitor Conquer-generals Nvgs70 Deskjet 3535 B-BOX YO-480 AX4sgmax Vista M22 - 1996 FT-897D E-500 QW104D Starbase 2010 Sonim XP1 AG-HMC151E Fully 8 CM200USB GA-8S648FXM MM008V2 Blackberry 7130 Edition D1030 VPL-ES3 Device SUB-zero 501F Compact Officejet 7130 SGH-E770 Bluetooth-headset H700 SRU5020-87 Siemens M580 Quick BH-303 Primo UK 240DF Congress 100 32A558p3F ALL-IN-wonder 9200 Laserjet 8550 HR2450F Desktop PC
manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101