Super-Sonic Series Amplifiers
The Super-Sonic amplifiers were created in response to constant player demand for the famous Fender clean tone, and a modern ultra high-gain tone, all in one simple tube amp! The Super-Sonic includes a specially voiced VINTAGE channel, based on two legendary historic Fender amps; the BURN channel provides true inspiration and flame-throwing modern gain. The robust 60-Watt power platform provides lots of output for club gigs and venues of almost any size. Features include: All-tube circuitry 60 Watts from two 6L6 output tubes Five 12AX7 preamp tubes & one 12AT7 (head version) Six 12AX7 preamp tubes & two 12AT7s (combo) VINTAGE channel contains two amp "voicing" selections Shimmering clean tone based on a 1965 Vibrolux circuit Thick, punchy tone based on a 1966 Bassman circuit Dual-gain BURN channel delivers awe-inspiring, fully saturated tube overdrive Fender long-spring Reverb by Accutronics (combo only) Professional FX loop with level control; may also be used as a footswitchable boost, effectively creating four-channel capability 112 combo, and Super-Sonic enclosures (sold separately), feature premium 12" Celestion Vintage 30 speakers Choice of iconic 1961 Blonde/Oxblood cosmetic treatment, or new "Black Pepper" look Cover and 3-button Footswitch included 5-year limited transferable warranty (US and Canada. Other territories may vary)
The World's Most Popular Instrument Amplifiers. Since 1946

Front Panel

A. INPUT
Plug your guitar in here.
B. VOLUMEAdjusts the loudness of the VINTAGE channel. C. VIBROLUX / BASSMANSelects the amplifier circuitry of the VINTAGE channel, as indicated by the LEDs. VIBROLUX Voicing BASSMAN Voicing D. TREBLE / BASS Adjusts the high and lowfrequency tone character of the VINTAGE channel. E. VINTAGE / BURN Selects the active channel as indicated by the LEDs. VINTAGE Channel BURN Channel
GAIN 1 / GAIN 2Primary and Secondary adjustments for distortion and sustain of the BURN channel. Use in conjunction with VOLUME {H} to control the overall loudness of the amp.
G. TREBLE / BASS / MIDDLEAdjusts the high low and midfrequency tone character of the BURN channel. H. VOLUMEUse to adjust the overall loudness of the BURN channel after setting GAIN {F} levels. I. J. REVERB (112 Combo Amps)Adjusts the Reverb level for both channels. POWER INDICATORIlluminates when the unit is ON.

BURN Channel Settings

Basic rock tone that cleans up nicely Lo-Fi Fuzz Texas Plays Itself! Percussion

Rear Panel

L. POWERTurns the amp ON-OFF. You can extend the life of the amplifier tubes by keeping the STANDBY {M} switch down for the first 60 seconds that the power is ON. M. STANDBYIn standby, the amplifier outputs are disabled while power is supplied to the tube filaments only, keeping them warm. *Tip: Use STANDBY instead of switching the power off during short breaks to extend tube life and avoid the warm-up delay upon returning to play. N. IEC POWER INPUT SOCKET Connect to a grounded outlet using the supplied power cord, in accordance with the voltage and frequency specified on the rear panel of your amplifier. O. FUSEProtects the amplifier from electrical faults. Only replace a blown fuse with the type and rating specified on the rear panel of your amplifier. P. SEND LEVELAdjusts the output level of the SEND {Q} jack. Use to accommodate the input sensitivity of your external effects device.

U. FOOTSWITCH Connect the included 3-button footswitch to enable remote selection of: Amp Voicing {C}, Channel {E} and FX Loop Bypass. These buttons {C & E} are disabled on the front panel when the footswitch is connected. V. MAIN SPEAKER / EXTENSION SPEAKER
A speaker must ALWAYS be plugged into the MAIN SPKR jack when the SuperSonic amplifier is ON or damage may occur. Switch the amplifier OFF or to STANDBY while changing speaker connections or impedance settings.
(112 COMBO AMPS)Keep the internal speaker connected to the MAIN SPKR jack for normal operation. Plug an 8 extension speaker into the EXT SPKR jack and the SuperSonic amplifier will automatically switch to handle a 4 load. MAIN SPKR EXT SPKR None 8 IMPEDANCE AUTO SETTING = 8 = 4
Q. SEND / RETURNEffects loop jacks. Connect SEND to your effects device input and RETURN to the effects output. TIP: The FX button on the footswitch can function as a volume boost switch even without effects in the loop. Simply connect SEND to RETURN with a guitar cable then adjust SEND LEVEL {P} and RETURN LEVEL {R} for the desired level of volume boost. R. RETURN LEVELAdjusts the RETURN {Q} jack input level going into the power amp. Use to match the volume level of the amp when effects are off, or to set an alternate volume level selectable from the footswitch. S. PRE AMP OUTAn unbalanced, line-level output (includes Reverb on the 112 Combo amps) suitable for connection to recording equipment and sound systems. NOTE: You can connect this jack to the POWER AMP IN jack on a second Super-Sonic amp for a double amplifier setup. in which you can control both units from the control panel of the primary amplifier. T. POWER AMP INA direct input to the power amplifier. The preamp circuit is automatically disconnected when a plug is inserted into this jack. Useful when adding a second Super-Sonic as an extension power amplifier. Connect this jack to PRE AMP OUT from another amp.
(HEAD AMPS) Connect speaker enclosures and set the IMPEDANCE SELECTOR {W} according to the table below. MAIN SPKR 4 EXT SPKR None 16 None 8 None IMPEDANCE SETTING 4

+ + + + +

= = = = =
W. IMPEDANCE SELECTOR (Head Amps) Select the speaker output impedance that matches the total impedance load of the speaker configuration you have chosen from the table above.

Specifications

**Cdigo da cor exterior do amplificador Super-Sonic e do gabinete de alto-falante: Black x=0, Blonde x=4 **Caixas recomendadas. Vendidas separadamente. As especificaes do produto esto sujeitas a mudana sem aviso prvio.

Super-Sonic

Super Sonic Fender Super Sonic BURN Accutronics Fender

VINTAGE

Fender BURN
112 Celestion Super Sonic Vintage 30

4 12"

1961 3

6L6 12AX12AX7

Vibrolux 1966 Bassman

2 12AT7 12AT7

A. INPUT B. VOLUME

VINTAGE

F. GAIN 1 / GAIN 2 BURN

VOLUME {H}

C. VIBROLUX / BASSMAN VINTAGE
LED VIBROLUX BASSMAN VINTAGE LED VINTAGE BURN
G. TREBLE / BASS / MIDDLE H. VOLUME

BURN GAIN {F} 112 ON

D. TREBLE / BASS E. VINTAGE / BURN

REVERB

STANDBY {M}

ON OFF

U. FOOTSWITCH

M. STANDBY

STANDBY

Super Sonic MAIN SPKR

N. IEC

112 SPKR

EXT SPKR Super Sonic

P. SEND LEVEL

SEND {Q}

MAIN SPKR EXT SPKR =

Q. SEND
RETURN SEND TIP: FX SEND RETURN

RETURN

IMPEDANCE SELECTOR {W} MAIN SPKR EXT SPKR

SEND LEVEL RETURN {Q}

{P} RETURN LEVEL {R}

R. RETURN LEVEL

NOTE: Super Sonic POWER AMP IN

= = = =

S. PRE AMP OUT

W. IMPEDANCE SELECTOR

T. POWER AMP IN

Super Sonic

SUPER-SONIC HEAD PR 657 2160100x00* (120V, 60Hz) 2160101x00* (110V, 60Hz) TW 2160103x00* (240V, 50Hz) AUS 2160104x00* (230V, 50Hz) UK 2160105x00* (220V, 50Hz) ARG 2160106x00* (230V, 50Hz) EUR 2160107x00* (100V, 50Hz) JPN 2160109x00* (220V, 60Hz) ROK 180W : : :

100V120V : 220V240V :

SUPER-SONIC 112 COMBO PR 687 2160500x00* (120V, 60Hz) 2160501x00* (110V, 60Hz) TW 2160503x00* (240V, 50Hz) AUS 2160504x00* (230V, 50Hz) UK 2160505x00* (220V, 50Hz) ARG 2160506x00* (230V, 50Hz) EUR 2160507x00* (100V, 50Hz) JPN 2160509x00* (220V, 60Hz) ROK 180W 60W RMS @ 5% THD 1kHz sine into 8 1M 4 / 8 F 3A L, 250V F 1.6A L, 250V 3 (069285) Voicing / Channel / FX on-off 12" Celestion Vintage 30 (047279) 1 44.1 cm (17.375 in) 64.5 cm (25.375 in) 25.9 cm (10.188 in) 24.5 kg (54 lb)

60W RMS @ 5% THD 1kHz sine into 8 1M 4 / 8 / 16 F 3A L, 250V F 1.6A L, 250V 3 (069285) Voicing / Channel / FX on-off Super-Sonic 212** (2161200x00)* Super-Sonic 412** (2161400x00)* : : : 21.9 cm (8.625 in) 64.5 cm (25.375 in) 24.5 cm (9.625 in) 14.5 kg (32 lb)

x =0 x =4

Super Sonic
A PRODUCT OF: FENDER MUSICAL INSTRUMENTS CORPORATION CORONA, CALIFORNIA USA Fender, Bassman, Vibrolux and Super-Sonic are trademarks of FMIC. Other trademarks are property of their respective owners. 2005 FMIC. All rights reserved.

P/N 069290 REV. A