the precise way the simple little battery is supposed to go in the smoke detector which if not done right will cause big head aches.
I'm a big fan of Apple's HomeKit technology, and did a tour of my large 1870's home, which is filled with dozens of HomeKit ...
Introducing First Alert's Wireless Interconnect Smoke and Carbon Monoxide Alarm. A 2-in-1, battery-powered alarm that uses ...
Tech Note AlarmNet Communicator to Control Panel Compatibility
Vista-Low Series Panels
Honeywell Private Label DL 4110XM Vista-10/10SE Safewatch Pro Via-30/P/PSE Vista- P1 Vista-20 Vista-20SE SL150 Safewatch 2000 Vista-10P Vista-15P Vista 20P/PS 320P1 Safewatch 3000/EN Vista-21iP Vista-48LA LYNX Panels First Alert Modes Supported ECP FA100C FA110C FA120C FA140C/ FA142C FA147C FA148C FA160C FA162C FA 130CP FA148CP FA168CPS/FA168CGP ReadyGuard Panels NO NO NO Rev 15 + Rev 15 + Rev 15 + 4204 NO NO NO Zone Compass Downloading over IP/GSM NO NO NO NO NO NO NO NO NO NO NO NO NO Rev 2.0+ Rev 5.2+ Rev 5.2+ Rev 5.2+ Rev 5.4+ Special Note
None Note 3 Notes 1,2,3 Panel field *41 must be enabled for ECP mode 1,6 4,5 See LYNX/ReadyGuard Chart on Page 2
NO Rev 12+
Rev 3.0+ -
Compatibility tip: Unless otherwise noted, if a panel supports a mode (i.e. ECP) and the communicator also supports that mode (reference chart on page 4), then the panel and the radio are COMPATIBLE!!
Vista-Low Series ...
AlarmNet Services Compatibility
Vista-Low and Mid Series Panels
AlarmNet Control Panel Compatibility
Modes Supported Honeywell/ Private Label DL 4110XM Vista-10/10SE Safewatch Pro Via-30/P/PSE Vista- P1 Vista-20 Vista-20SE SL150 Safewatch 2000 Vista-10P Vista-15P Vista 20P/PS 320P1 Safewatch 3000/EN Vista-21iP Safewatch 4000 LYNX-R/REN LYNXR-I APX32 / APX32EN LYNXR-2 L3000 (LynxPlus)
Keypad Type Full Control (AUI)
GSM, GSMR, i, i-GSM
FA100C FA110C FA120C FA140C/ FA142C FA147C FA148C FA160C FA162C FA 130CP FA148CP FA168CPS/FA168CGP ReadyGuard-R/REN ReadyGuard-I ReadyGuard-R2 READYGD3000
Zone V+ V+ V+
Rev 15 +
Rev 15 +
V+ V- / Rev 2.0+ 5.2+ 5.4+ 3.0+
VRev 17+ Rev
Notes: 1. When "Rev." is referred to, it is referencing the revision of the control panel. 2. To support Total Connect features, your AlarmNet device must be v2.0.7 or later. 3. To support "Full ...