Lenntech Water treatment and Air purification
Softeners - LT simplex series Fleck 5600 The TL-simplex softeners from Lenntech use ion exchange to soften the water. A single Fleck controller controls a resin column and a brine tank. The Fleck 5600 can handle flow up to 2 m3/hr. The mixing valve makes it possible to adjust the remaining hardness. LT-simplex-5600-xx 112* x 82 168* x 86
Model Resin column (L) Capacity per column (m3D) Salt consumption per regeneration (kg) Brine tank (L) Height (cm) Floor plan (cm) **

56* x 76

84* 110

224* x 90

55 x 82
* Calculation real capacity softener: Divide the mentioned capacity by the hardness reduction, e.g.: 3 The LT-simplex-5600-01 by reduction from 8D to 4D has a capacity from 56 / (8-4) = 14m before a regeneration is needed ** Estimated floor plan, 1 column and 1 brine tank in most economical layout
The LT-simplex series can be equipped with several Fleck controllers, for the flow up to 2m3/hr the Fleck 5600 controller valve is most suitable and available in several types: Eco (volumetric), SE (electronic) and Chrono (timer). Hot water option (Fleck 4600) Specifications: Flow: up to 2 m3/hr Connections: BSP male or 1 BSP male Electrical: 230 Volt Drain, connect to the sewer to discharge drain water Built in mixing valve, to adjust remaining hardness Flexible connections are optional; these are available from 60 to 125 cm.
LT-simplex system Fleck 5600
The LT-twin softeners use vacuum pressed NaCl regeneration salt, this is available in 25 kg bags or per 1000kg pallet.
Lenntech, Water treatment and air purification
Rotterdamseweg 402M, 2629HH Delft, The Netherlands Tel: 015-00 / Fax: 015-89 info@lenntech.com / http://www.lenntech.com