Reviews & Opinions
Independent and trusted. Read before buy Flexvision Mobile Video Entertainment System!

Flexvision Mobile Video Entertainment System

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Flexvision Mobile Video Entertainment System, size: 471 KB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Flexvision Mobile Video Entertainment SystemAbout Flexvision Mobile Video Entertainment System
Here you can find all about Flexvision Mobile Video Entertainment System like manual and other informations. For example: review.

Flexvision Mobile Video Entertainment System manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Flexvision Mobile Video Entertainment System please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Flexvision Mobile Video Entertainment System photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 2. Page 1 of 1. Average Rating:
cen 6:12pm on Sunday, July 25th, 2010 
My Company uses Citrix, so I am able to run Windows Applications, SAP, even flash and all my GO TO corporate applications on the device. The iPad is exactly what I expected, easy to use, very well executed so long as you understand that it is mainly a device to consume media.
stevef 8:06am on Thursday, July 1st, 2010 
Bought the 16G WiFi for my wife. She enjoys playing games, surfing the web, reading books, reading email and catching up on her Soaps at ABC.com.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

LCM1041TV Owners Manual

CHANNEL

PICTURE

PIC. SEL.

Important Notice

It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the drivers seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the LCM1041TV should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Please note that the state of Rhode Island forbids the installation of such a device in a motor vehicle.

Television Reception

This entertainment system is designed primarily for viewing pre-recorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by the weather and distance from the TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss. Congratulations on your purchase of the Flexvision LCM1041TV drop down TV/Video monitor. The LCM1041TV has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owners manuals for each component in your system to obtain a full understanding of each components operation.

Safety Precaution

For safety reasons, when changing video tapes it is recommended that the vehicle is not in motion, and that you do not allow children to unfasten seat belts to change tapes or make adjustments to the system. System adjustments can be accomplished using the remote control unit, while seat belts remain
fastened. Enjoy your Flexvision entertainment system but remember- safety of all passengers remains the number one priority.

FEATURES

10.4 TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor OSD (On Screen Display) for control of Picture Quality and Functions Remote Control Television Tuner Plug in RF Transmitter for wireless RF Headphones Remote Sensor eye Three Audio / Video Sources Speaker Amplifier Back-lit Controls for Low Light Operation

FRONT PANEL FEATURE

Figure 1
FRONT PANEL FEATURES See Figure 1
1. Sensor Eye Allows the remote control to operate the LCM1041TVs OSD system (On Screen Display), volume to wired headphone jacks (and optional external speakers), and for control of Video Cassette Player and other accessories. 2. Power Button (Bright red when system is ON, dim when system is OFF). 3. Channel Up/Down Changes the TV channel. 4. Auto Program Press this button, the TV will automatically scan and memorize the broadcasting signal channels. 5. Screen Release Slides in the direction of the arrow to release the drop down screen. 6. TV/AV Used to select one of the three A/V sources. 7. Picture Tuning Up/Down Adjust picture control level Up or Down, if required. 8. Picture Select To select contrast, Brightness, Color and Tint for desired level adjustment.

BATTERY INSTALLATION

Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the remote control face down. Press down on the ridged area of the battery cover, and slide it off. 2) Install two AAA batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Slide the cover back until it clicks into position. The remote control will operate the LCM1041TV, Flexvision Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers.

TV POWER

TV/ VIDEO

0 1-ERASE/ WRITE

AUTO MEMORY

SKIP/ SEARCH

VCP POWER

REW F.FWD REPLAY STOP

If a universal remote control is used with the LCM1041TV, choose the remote control encoding scheme for Action Televisions when programming the remote.
Remote Controlled TV Functions
1. POWER ON/OFF Press this button to turn the LCM1041TV on. The channel number or current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the LCM1041TV off. 2. DIRECT ACCESS (0-9) BUTTONS Use these buttons to make a direct channel selection. The channel number chosen will be displayed on the screen for about 4 seconds. To select channels 0-99, press two number buttons. For example, to select channel 8, press 0, 8. To select channels above 100, press the 1-- button, then the number buttons for the last two digits of the channel. For example, to select channel 115, press 1--, 1, 5. 3. CHANNEL UP/DOWN BUTTONS Use these buttons to advance to the next higher or lower channel. 4. VOLUME UP/DOWN BUTTONS Use these buttons to raise or lower the volume level of the external speaker if installed. 5. TV / VIDEO BUTTON Any video equipment connected to the AUDIO/ VIDEO inputs can be used with the TV by pressing this button. Each time the button is pressed, the Audio/Video source will change in the following sequence VIDEO 1, VIDEO 2 and TV. 6. MUTE BUTTON Press this button to turn TV sound off. Press again to restore sound to the previously set level. Mute may also be released by pressing the VOLUME +/buttons.

7. SKIP / SEARCH BUTTON This button selects between SKIP and SEARCH mode. In SKIP mode the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are used. When SKIP is turned off, the TV will only stop on all active channels. 8. ERASE / WRITE BUTTON When tuned to a channel, press this button to store or erase the channel from memory. The stored channel numbers are displayed in green on the screen, and the non-stored channels are in red. When skip mode is on, the LCM1041TV will tune to only the stored channels when using the CHANNEL UP/DOWN buttons. 9. AUTO PROGRAM BUTTON When the AUTO PROGRAM button is pressed, the TV screen will show an important information screen and all the channel numbers for TV will be scanned. When the AUTO PROGRAM button is pressed, the TV screen will show an IMPORTANT information screen, all the channel numbers for TV or CABLE TV will be scanned. The broadcasting signals will be detected and automatically stored.
REMOTE CONTROLLED VCP FUNCTIONS
These features can only be used with a Flexvision Video Cassette Player, if this option was installed with your video package. 10. VCP POWER BUTTON This button is used to turn the VCP on and off. 11. REW REWIND BUTTON If this button is pushed while the tape is stopped, the tape will rewind. If this button is pushed while the tape is playing, the VCP will go into rewind search
mode. For more information consult the VCP owners manual. 12. PLAY BUTTON Press this button to activate play mode while a tape is loaded into the VCP. This button may also be used to disengage search and pause modes. For more information, consult the VCP owners manual. 13. FFWD FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pressed while the tape is playing, the VCP will go into fast forward search mode. For more information on the search feature of the VCP, consult the VCP owners manual. 14. STOP BUTTON Press this button to stop the tape. 15. REPLAY BUTTON During playback, press this button to rewind the tape

to the beginning and to begin PLAY mode from there.

CHANNEL TUNING SETUP

In order to easily access all available channels, it may be necessary to perform channel autoprogramming whenever the vehicles geographic location has changed, i.e. city to city, weak signal area. 1. Press the AUTO MEMORY button on the remote control unit. You will see the TV cycle through all its channels. The built-in microprocessor will automatically note each channel that is actively broadcasting in your area. 2. (A) To tune only strong clear channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until SKIP MODE ON is displayed on the bottom of the screen. The TV will now tune only to strong
active channels when the CHANNEL UP/DOWN buttons are used on the monitor or the remote control. (B) To tune to weak or marginal channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until SKIP MODE OFF is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control. 3. To ERASE a channel, press the ERASE/WRITE button on the Remote Control Unit until MANUAL MEMORY XX ERASE is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. Note: Please refer to page 2 for more information on TV reception.
TURNING THE LCM1041TV ON OR OFF
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. (Pivot the screen downward until a comfortable angle is reached). After the unit has been turned on and is displaying a picture, adjustment to the viewing angle can be made by pivoting the screen to optimize the picture quality. The friction hinges will hold the screen in position while the system is in use. 2. Pressing the power button on the pod or remote will alternately turn the system on or off. When in
use the internal back lighting will illuminate the controls. 3. Remember to turn the unit off and pivot the LCD to the locked position when not in use.

Remote Sensor

The LCM1041TV incorporates an infrared sensor, which relays the signals from the remote control to allow the LCM1041TV and VCP to be controlled simply by pointing its remote control at the remote sensor. This provides control of auxiliary equipment such as a Flexvision Video Cassette Player. The infrared sensor can relay signals from any manufacturers remote control to its respective component connected to the Video 1 and 2 inputs, such as a DVD player. In this case you must use the remote control supplied with the DVD player.

OPTIONAL ACCESSORIES Wireless Headphones
The LCM1041TV includes a RF transmitter (P/N WTXRF02) for use with optional Flexvision wireless headphones. Tuning the headphone switch on, and wearing them activates the internal micro switch, (which includes a tuning knob to tune into the preset frequency on the RF transmitter), which will activate the internal RF receiver. The volume can be adjusted separately with the controls on the headset. See the documentation accompanying your Flexvision wireless headphones.
Auxiliary A/V Stereo Inputs Jack
The LCM1041TV may be equipped with an auxiliary A/V stereo input connector (optional). These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio/video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs. If patch cords are installed into the AUX inputs, the AUX INPUT 2 will be temporarily bypassed. Once the connections have been made, turn the LCM1041TV on and press the source button on the LCM1041TV or the TV/Video button on the remote control until Video 2 is displayed on the screen. The unit will now play the audio and video signals from the accessory connected. The remote control will not operate the accessory components.
Wired FM Modulator (P/N 0190730)
Your video system may be equipped with an RF modulator, that allows you to listen to the LCM1041TVs audio signal by tuning your vehicles radio to the selected frequency, (88.7 or 89.1- check with your installer) and tuning on the remote mounted RF modulator switch. (In most cases this toggle switch will be located underneath the drivers side of the dash, check with your installer for the exact location.) Whenever the RF modulator is on, broadcast radio reception will be poor. Turning the remote mounted toggle switch off will allow for normal radio reception.

Video Output

The LCM1041TV provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the LCM1041TV to an additional monitor or video display. Please see your installer for more information.
Flexvision Video Cassette Player (Aux Video 1)

In most installations a VCP will be connected to the Video 1 input. To view a video cassette, turn the AVP7000/ AVP7285 on and press the source button on its control panel or the TV/Video button on the remote control unit until Video 1 is displayed on the screen. The VCP may also be operated with the remote control or the buttons on its face. Inserting a tape into the VCP will turn it on and automatically activate the play mode. If a rewound tape had been loaded into the VCP, prior to its activation press play on the VCP or the remote control to view the tape. For more information see the owners manual accompanying your VCP.
TYPICAL SYSTEM CONNECTIONS
PIN 1 Power/ Red PIN 2 Power GND/ Black

T FM Transmitter o

PIN 3 Audio(L)Out/ Grey PIN 4 Audio GND/ Black PIN 5 Audio(R)Out / Green

Antenna

DIN 1 DIN 2
Red (Audio Out R) White (Audio Out L) Yellow (Video out)

Accessory Harness

2 PIN IR Connector Yellow RCA(Video) 4 PIN Power Connector White RCA(Audio Left) Red RCA(Audio Right)

doc1

LCM1042TV Owners Manual

CHANNEL AP

VOLUME

PIC. SEL.
Audiovox Specialized Applications, LLC 23319 Cooper Dr. Elkhart, IN 46514 1-800-688-3135 www.asaelectronics.com

US PATENT # D413, 856

Important Notice
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is located in the motor vehicle at any point forward of the back of the drivers seat, or that is visible, directly or indirectly, to the driver while operating the vehicle. In the interest of safety, the LCM1042TV should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Please note that the state of Rhode Island forbids the installation of such a device in a motor vehicle.

Television Reception

This entertainment system is designed primarily for viewing pre-recorded movies or playing video games. Television reception in a moving vehicle will be limited and in some areas will not be possible due to weak and variable signal strength. Television viewing in a stationary vehicle will result in an improvement, but may still be marginal due to strength. The quality of the picture will not be consistent with home TV reception. Reception may be affected by the weather and distance from the TV station. A weak signal may cause the picture to roll, be snowy, or cause some color loss.
Congratulations on your purchase of the Flexvision LCM1042TV drop down TV/Video monitor. The LCM1042TV has been designed to give you and your family many years of video entertainment in the mobile environment. Please read the directions that follow to familiarize yourself with the product and to ensure that you obtain the best results from your equipment. Please note: Installation options vary, see the individual owners manuals for each component in your system to obtain a full understanding of each components operation.

FEATURES

10.4 TFT (Thin Film Transistor) Active Matrix LCD (Liquid Crystal Display) Monitor OSD (On Screen Display) for control of Picture Quality and Functions Remote Control Television Tuner Plug in RF Transmitter for wireless RF Headphones Remote Sensor eye Three Audio / Video Sources Speaker Amplifier Back-lit Controls for Night Time Operation

Safety Precaution

For safety reasons, when changing video tapes or DVDs it is recommended that you not allow children to unfasten seat belts to change tapes or make adjustments to the system while vehicle is in motion. System adjustments can be accomplished using the remote control unit, while seat belts remain fastened.

FRONT PANEL FEATURE

Figure 1

CHANNEL

FRONT PANEL FEATURES See Figure 1
1. Power Button (Bright red when system is ON, dim when system is OFF). 2. Channel Up/Down Changes the TV channel. 3. Auto Program Press this button, the TV will automatically scan and memorize the strong signal channels. 4. Sensor Eye Allows the remote control to operate the LCM1042TVs OSD system (On Screen Display), volume to wired headphone jacks (and optional external speakers), and for control of Video Cassette Player, DVD Player and other accessories. 5. Three position Dome Light Switch Auto Automatically switches on the dome lights in conjunction with the vehicles interior illumination. Off The dome lights will not turn on in this position. On Turns on the dome lights. 6. Screen Release Slide button in the direction of the arrow to release the drop down screen.
7. TV/AV Any video equipment connected to the AUDIO/VIDEO inputs can be used with the TV by pressing this button. Each time the button is pressed , the Audio/Video source will change in the following sequence VIDEO 1, VIDEO 2 and TV. 8. Volume Tuning Up/Down To raise or lower the volume level. Also used to adjust the picture control setting when contrast, bright, color or tint is displayed on-screen. 9. Picture Select To select Contrast, Brightness, Color and Tint for desired level adjustment. If adjustments not made within a few seconds, picture select mode will automatically be cancelled. 10. Dome Lights illumination. provide additional Interior

REMOTE CONTROL OPERATION

TV POWER

TV/VIDEO

BATTERY INSTALLATION
Before attempting to operate your Remote Control, install the batteries as described below. 1) Turn the remote control face down. Press down on the ridged area of the battery cover, and slide it off. 2) Install two AAA batteries as shown. Make sure that proper polarity (+ or -) is observed. 3) Slide the cover back until it clicks into position. The remote control will operate the LCM1042TV, Flexvision Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers. If a universal remote control is used with the LCM1042TV, choose the remote control encoding scheme for Action Televisions when programming the remote.
1-ERASE/ WRITE AUTO MEMORY

SKIP/SEARCH

PIX VOLUME

VCP POWER PLAY

REW F.FWD REPLAY STOP
Remote Controlled TV Functions
1. POWER ON/OFF Press this button to turn the LCM1042TV on. The channel number or current video source will be displayed on screen, and the picture will appear in a few seconds. Press the button again to turn the LCM1042TV off. 2. DIRECT ACCESS (0-9) BUTTONS Use these buttons to make a direct channel selection. The channel number chosen will be displayed on the screen for about 4 seconds. To select channels 0-99, press two number buttons. For example, to select channel 8, press 0, 8. To select channels above 100, press the 1-- button, then the number buttons for the last two digits of the channel. For example, to select channel 115, press 1--, 1, 5. 3. CHANNEL UP/DOWN BUTTONS Use these buttons to advance to the next higher or lower channel. 4. PIX AND VOLUME UP/DOWN BUTTONS To raise or lower the volume level. Also used to adjust the picture control setting when contrast, bright, color or tint is displayed on screen. -75. TV / VIDEO BUTTON Any video equipment connected to the AUDIO/ VIDEO inputs can be used with the TV by pressing this button. Each time the button is pressed, the Audio/Video source will change in the following sequence VIDEO 1, VIDEO 2 and TV. 6. MUTE BUTTON Press this button to turn TV sound off. Press again to restore sound to the previously set level. Mute may also be released by pressing the VOLUME +/buttons. 7. SKIP / SEARCH BUTTON This button selects between SKIP and SEARCH mode. In SKIP mode the TV only stops on channels that are programmed into memory when the CHANNEL UP/DOWN buttons are pressed. When SKIP is turned off, the TV will advance to next channel/previous channel number when channel up/down is pressed. 8. ERASE / WRITE BUTTON When tuned to a channel, press this button to store or erase the channel from memory. The stored channel numbers are displayed in green on the screen, and the non-stored channels are in red.

When skip mode is on, the LCM1042TV will tune to only the stored channels when using the CHANNEL UP/DOWN buttons. 9. AUTO MEMORY BUTTON Press this button, the TV will automatically scan and memorize the strong signal channels
12. PLAY BUTTON Press this button to activate play mode while a tape I is loaded into the VCP. This button may also be used to disengage search and pause modes. For more information, consult the VCP owners manual. 13. FFWD FAST FORWARD BUTTON If this button is pushed while the tape is stopped, tape will fast forward. If this button is pressed while the tape is playing, the VCP will go into fast forward search mode. For more information on the search feature of the VCP, consult the VCP owners manual. 14. STOP BUTTON Press this button to stop the tape. 15. REPLAY BUTTON During playback, press this button to rewind the tape to the beginning and to begin PLAY mode from there.
REMOTE CONTROLLED VCP FUNCTIONS
These features can only be used with a Flexvision Video Cassette Player, if this option was installed with your video package. 10. VCP POWER BUTTON This button is used to turn the VCP on and off. 11. REW REWIND BUTTON If this button is pushed while the tape the tape will rewind. If this button while the tape is playing, the VCP rewind search mode. For more consult the VCP owners manual. is stopped, is pushed will go into information

CHANNEL TUNING SETUP

In order to easily access all available channels, it may be necessary to perform channel auto - programming whenever the vehicles geographic location has changed, i.e. city to city, weak signal area. 1. Press the AUTO MEMORY button on the remote control unit. You will see the TV cycle through all its channels. The built-in microprocessor will automatically store each channel that is actively broadcasting in your area. 2. (A) To tune only stored clear channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until SKIP MODE ON is displayed on the bottom of the screen. The TV will now tune only to stored channels when the CHANNEL UP/DOWN buttons are used on the monitor or the remote control. (B) To tune to weak or marginal channels with the CHANNEL UP/DOWN buttons, press the SKIP/SEARCH button on the Remote Control Unit until SKIP MODE OFF is displayed on the bottom of the screen. Tune to the desired channel using the CHANNEL UP/DOWN buttons or go directly to the channel by using the 0-9 buttons on the Remote Control.

3. To ERASE a channel, press the ERASE/ WRITE button on the Remote Control Unit until MANUAL MEMORY XX ERASE is displayed on screen. To STORE a channel, press the button until the MANUAL MEMORY XX ADD is displayed on screen. Note: Please refer to page 2 for more information on TV reception.
TURNING THE LCM1042TV ON OR OFF
1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. (Pivot the screen downward until a comfortable angle is reached). 2. Pressing the power button on the pod or remote will alternately turn the system on or off. When in use the internal back lighting will illuminate the controls. After the unit has been turned on and is displaying a picture, adjustment to the viewing angle can be made by pivoting the screen to optimize the picture quality. The friction hinges will hold the screen in position while the system is in use. 3. Remember to turn the unit off and pivot the LCD to the locked position when not in use.
OPERATION Overhead Dome Lights
This lights integrated into the LCM1042TV are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times and the auto position will allow the lights to turn on and off with the vehicles interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery.

Dome Light Switch

Remote Sensor
The LCM1042TV incorporates an infrared sensor, which relays the signals from the remote control to allow the LCM1042TV and VCP to be controlled simply by pointing its remote control at the remote sensor. This provides control of auxiliary equipment such as an Flexvision Video Cassette Player or DVD. The infrared sensor can relay signals from any manufacturers remote control to its respective component connected to the Video 1 and 2 inputs. In this case you must use the remote control supplied with the other manufacturers component.

OPTIONAL ACCESSORIES Wireless Headphones
The LCM1042TV includes a RF transmitter (P/N WUX or WUX3) for use with optional Flexvision wireless headphones. Tuning the headphone switch on, and wearing them activates the internal micro switch, (which includes a tuning knob to tune into the preset frequency on the RF transmitter), which will activate the internal RF receiver and the volume can be adjusted separately with the controls on the headset. See the documentation accompanying your Flexvision wireless headphones.
Auxiliary A/V Stereo Inputs Jack
The LCM1042TV may be equipped with an auxiliary A/V stereo input connector (optional). These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio/video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs. If patch cords are installed into the AUX inputs, the AUX INPUT 2 will be temporarily bypassed. Once the connections have been made, turn the LCM1042TV on and press the source button on the LCM1042TV or the TV/Video button on the remote control until Video 2 is displayed on the screen. The unit will now play the audio and video signals from the accessory connected. The remote control will not operate the accessory component. LCM1042TV Jack Panel
HEADPHONES AUDIO - R AUDIO - L VIDEO HEADPHONES

Video Output

The LCM1042TV provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the LCM1042TV to an additional monitor or video display. Please see your installer for more information.
Flexvision Video Cassette Player (Aux Video 1)
In most installations a VCP will be connected to the Video 1 input. To view a video cassette, turn the AVP7000/ AVP7285 on and press the source button on the LCM1042TV control panel or the TV/Video button on the remote control unit until Video 1 is displayed on the screen. The VCP may also be operated with the remote control or the buttons on its face. Inserting a tape into the VCP will turn it on and automatically activate the play mode. For more information see the owners manual accompanying your VCP.
TYPICAL SYSTEM CONNECTIONS

POWER(GND) POWER(+ 12V)

TWO DOME LIGHTS CONNECTION

Antenna

LINE OUT- R

LINE OUT-V

49 Mhz FM Transmitter

LINE OUT- L

SPEAKER OR HEADPHONE CONNECTION
Negative Dome Light Switching

DIN 1 DIN 2

White Black Red-
Entry Switch/Negative Constant + 12VDC/Dome Chassis Ground

TO FM TRANSM ITTER

Positive Dome Light Switching White Black RedEntry Switch/Positive Chassis Ground Constant + 12VDC/Dome

Accessory Harness

PIN 1 Power/Red PIN 2 Power GND/Black PIN 3 Dome Light Auto/White PIN 4 Light GND/Black PIN 5 Dome Light B+ /Red

IR Transmitter LED

2 PIN IR Connector Yellow RCA(Video) 4 PIN Power Connector White RCA(Audio Left) Red RCA(Audio Right)
PIN 6 Line Out (L)/White PIN 7 Spk Out (R) /Green PIN 8 Spk Out-GND/Black PIN 9 Spk Out (L)/Grey PIN 10 Video Out/Yellow PIN 11 Video GND/Black PIN 12 Line Out (R)/Red PIN 13 Power 12V(FM Trans.)/Red PIN 14 Power GND (FM Trans.)/Black PIN 15 Audio (L) Out (FM Trans.)/White PIN 16 Audio GND (FM Trans.)/Black PIN 17 Audio (R) Out (FM Trans.)/Red PIN 18 Line Out GND/Black

OPTIONAL PRODUCT LIST

Televisions AVT-CRT Color Television with Remote (12V) AVT-CRT Color Television with Remote (12V) VCP and DVD Players for use with CRT and LCD products AVP7000 Video Cassette Player (12V) AVP7285 Stereo Video Cassette Player (12V) Single Disc DVD player (DIN) Headphones Wireless Headphones Wired Headphones with Pivoting Ear Cup Wired Headphones with Volume Control on Cord Studio Quality Headphones Miscellaneous Remote Controls Wallmount Family Radio Service with 4 Handsets Replacement Handset 12V Corded Vacuum Rechargeable Flashlight Window Mount TV Antenna 2 Amp Adapter for use with AVP7000 VCP 4 Amp Adapter for use with AVTTV and AVTTV Wallmount Radios AM/FM Wallmount Manual Tune w/Cassette Player AM/FM Wallmount Electronic Tune w/Cassette Player AM/FM Wallmount Electronic Tune w/CD Player -14-
Part Number AVT988 AVT1498 AVP7000 AVP7285 DVD2101 WHPRF01 HP175 HP275 HP375 Visit www.asaelectronics.com FRS4WM FRS100Y VAC21 AVF1 AN0891412 AWM710 AWM820 AWM930
Marine AM/FM Stereo with CD Player AM/FM/Weatherband Stereo with Cassette Player AM/FM Stereo with Cassette Player (analog tune) AM/FM Stereo with Cassette Player (analog tune) Weatherproof Radio Housing 50 Watt 6-1/2 Speakers (white/black) 30 Watt 5 Speakers (white/black) 30 Watt 4 Speakers Marine Radio Antenna MS1000 MS407 MS306 MS220 MRH211 AMS6 AMS5 AMS4 AN125
Unlike household electronics, all of our products have been specifically designed and tested for the mobile environment and are only available through ASA. To order any of these products, please contact Audiovox Specialized Applications at www.asaelectronics.com. * Prices are subject to change

Troubleshooting

PROBLEM Poor TV Reception SOLUTION Perform auto programming of the tuner Verify antenna condition. NOTE: Due to the nature of TV signals, vehicle motion, direction the vehicle is facing, distance from the transmitter, nearby surroundings and weather may adversely affect TV reception. These conditions may result in the following: picture roll, snowy picture, or momentary loss of color. Please refer to page 2 for more information on TV reception. Check the condition of the vehicles radio antenna. Verify that the antenna is fully raised If a wired RF modulator has been installed, verify that its switch is turned to the off position Verify +12VDC on red wire at power harness going to the video pod. Verify ground connection. Verify connections at both ends of source component harness. Verify that the batteries in the remote are fresh Verify that the remote eye is not obstructed. Verify that the infrared transmitter is affixed over the sensor eye of the component to be controlled

Specifications

Operation Temperature Storage Temperature Video Display System Audio Output Current Draw Weight Overall Dimensions -10C~ 65C - 40C ~ 85C NTSC 0.6W @ 16 2A 5.3 Lbs. 2.2 x 11 x 11.2 Inch (H x W x D)
Poor radio reception (FM modulator installed)

No power to LCD

Power but no video or sound IR sensor inoperative
The Mobile Electronics Company
90 DAY/ 12 MONTH LIMITED WARRANTY
AUDIOVOX SPECIALIZED APPLICATION, LLC (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 90 days from the date of original purchase, such defect(s) will be repaired or replaced (at the Company's option) without charge for parts and repair labor. After the initial 90 day period and for a period of 12 months from the date of original purchase, the Company will supply at no charge a replacement for any defective part(s), but will charge for the labor to repair the product. To obtain repair or replacement within the terms of this warranty, the product is to be delivered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station, or the Company at the address shown below. This warranty does not extend to the elimination of externally generated static or noise, to the correction of antenna problems, to costs incurred for removal or reinstallation of the product, or to damage to any tapes, speakers, accessories, or electrical systems. This warranty does not apply to any product or part thereof which, in the opinion of the Company, has been damaged through alteration, improper installation, mishandling, misuse, neglect, or accident. THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE, AND, IN NO EVENT, SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER FOR THE PRODUCT. This warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALL BE LIMITED TO THE DURATION OF THIS WARRANTY. ANY ACTION FOR BREECH OF ANY WARRANTY HEREUNDER INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 DAYS FROM THE DATE OF ORIGINAL PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREECH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representative is authorized to assume for the Company any liability other that expressed herein in connection with the sale of this product. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights and you may also have other rights which vary from state to state. AUDIOVOX SPECIALIZED APPLICATIONS, LLC 23319 COOPER DR. ELKHART, IN 46514 Visit us at http://www.asaelectronics.com

UDIOVOX

PECIALIZED

PPLICATIONS, L.L.C.

23319 Cooper Dr. Elkhart, IN 46514 800-688-3135 www.asaelectronics.com

Revision A 1/2002

 

Tags

Seccoprof EL U8138 ALL-IN-ONE ACC-ctbn 1350E Meteo SX-440 FL984CN DCR-PC120 ES300 DEH-P7450MP XNV-770BT Quest EP706 RM6401 Review PS7000 SD-YD250 33 HDR-CX116E AL-1220 Dynax 7XI DSP-100 IP921 WF0804Y8E WF-552SPP DMP-BDT100 MP950 Que 1620 3G S F1406 WTC1398N Center 345 1 Braun 380 1800-364E D-C20 N3260W 71-48 SR-24NME XLT800-2002 PRO 4600 System Plvz1 NV-FJ730 Revised SBO-5121N X3650 FYB562W 40320 Server EW510F SSE-UMB-100 GZ-MG50 CA950 46 Spbe Plus Full DP-2500 HT503SH-a2 SGH-A707 Humminbird 323 MAX-WS730 ICF-C8WM KDL-32S3020 VGN-FZ31J VPC-PD1 Ultra Zoom SCR-187 32PC5RVH AG-HPG20 RD-85DT MF-FM30s1K Amigo 5001 MK-2 XR-C7220R Nakamichi MR2 2000 Piii F72 EXR WS-65313 DS6311-2 KD-G152EU TCP50VT20 SH-101 Mouse Set-TOP CCG432W FE-140 CD6551B 53 CCD-TRV238E E1920NX NW-E505 NS-P270 V4 5 Urc-6011 DCR-HC46 Sho-2008 Janome 423S Single Piano Touring EL-6930 DHT-FS3

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101