80 Series V Industrial True-RMS Multimeter with Temperature
Accuracy and diagnostic functions for maximum industrial productivity
The new Fluke 87V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electromechanical equipment. The 87V operates very similar to the classic 87, but with more problem-solving power, safety, convenience and impact protection.
New features for maximum productivity
Unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment (87V) Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument (87V) Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks Large digit display with bright, two-level backlight makes the 80 Series V significantly easier to read than older models

Electrical safety

All inputs are protected to Category III, 1000 V and Category IV 600 V. They can withstand impulses in excess of 8,000 V and reduce risks related to surges and spikes.

rical Sa ct

1000 V CAT III 600 V CAT IV

N10140

Specifications
Function Range and resolution Basic accuracy 83V DC Volts AC Volts DC Current AC Current Temperature (excl. probe) 80BK Temperature Probe Resistance Capacitance Frequency 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 600.0 mV, 6.000 V, 60.00 V, 600.0 V, 1000 V 600.0 A, 6000 A, 60.00 mA, 600.O mA, 6.000 A, 10.00 A 600.0 A, 6000 A, 60.00 mA, 600.O mA, 6.000 A, 10.00 A -200 to 1090 C (-328 to 1994 F) -40 to 260 C (-40 to 500 F) 600.0 , 6.000 k, 60.00 k, 600.0 k, 6.000 M, 50.00 M 10.00 nF, 100.0 nF, 1.000 F, 10.00 F, 100.0 F, 9,999 F 199.99 Hz, 1.9999 kHz, 19.999 kHz, 199.99 kHz 0.1 % 0.5 % 87V 0.05 % 0.7 % (True-rms) 0.2 % 1.0 % (True-rms) 1.0 % 2.2 C or 2 % 0.2 % 1.0 % 0.005 %

0.4 % 1.2 %

0.4 % 1.0 % 0.005 %

Comparison chart

Feature True-rms ac voltage and current for accurate measurements on non linear signals Selectable filter for accurate voltage and frequency measurements on motor drives 0.05 % dc accuracy 4-1/2 digit mode for precise measurements Built-in thermometer lets you carry one less tool Large display digits and two-level bright white backlight for increased visibility 10,000 F capacitance range for components and motor caps Peak capture to record transients as fast as 250 s Measure up to 1000 V ac and dc Measure up to 10 A, 20 A for up to 30 seconds Auto and manual ranging for maximum flexibility Analog bargraph Resistance, continuity and diode test Frequency to 200 kHz and % duty cycle Min/Max and average recording to capture variations automatically Relative mode to remove test lead resistance from low ohms measurements Improved sleep mode for long battery life Access door for fast battery changes without breaking the calibration seal Limited lifetime warranty Removable holster with built in test lead and probe storage Cat IV 600 V and Cat III 1000 V electrical safety ratings Basic test leads and alligator clips Bead type thermocouple temperature probe 83V 87V
Fluke 87V/E Industrial Electrician Combo Kit
Includes special accessories to make industrial troubleshooting even more productive. Save more than $50* compared with the individual purchase price. A. 1.5 m heat resistant silicone test leads B. Removable test probes with 4 mm of exposed metal for use on industrial circuits C. Retractable long reach alligator clips D. Magnetic hanger to position and hold meter to steel surfaces E. Temperature probe Packaged in a durable carrying case
*Savings are noted in US$

Included accessories

Every Fluke 80 Series V meter comes packaged with TL75 Test Leads, AC72 Alligator Clips, holster, 9 V battery (installed), temperature probe (87V only) CD-ROM (users manual and technical notes) and operators guide.

Ordering information

Fluke-83-5 Fluke-87-5
Industrial Multimeter Industrial True-rms Multimeter with Temperature Fluke-87-5/E Industrial Electrician Combo Kit
Fluke. Keeping your world up and running.
Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 200 or Fax (31 40) 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com/
2004 Fluke Corporation. All rights reserved. Printed in U.S.A. 3/D-ENG-P Rev A

www.tti.co.uk

Tel: 01480 412451
80 Series V Digital Multimeters
Performance and accuracy for maximum industrial productivity
The new Fluke 80 Series V has improved measurement functions, troubleshooting features, resolution and accuracy to solve more problems on motor drives, in plant automation, power distribution, and electro-mechanical equipment. The 80 Series V operates very similar to the classic 80 Series, but with more problemsolving power, safety, convenience and impact protection. The new Fluke 87V has a unique function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment. A built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument.

True RMS

Electrical safety
All inputs are protected to EN61010-1 (2nd edition) CAT III, 1000 V and CAT IV 600V. They can withstand impulses in excess of 8.000 V and reduce risks related to surges and spikes.

Features

83V True-RMS voltage and current for accurate measurements on non linear signals Bandwidth (voltage/current) Digital display counts (default/selectable) Selectable lter for accurate voltage and frequency measurements on motor drives Large display with analog bargraph and 2 level bright white backlight Auto and manual ranging for maximum exibility Built-in thermometer lets you carry one less tool Peak capture to record transients as fast as 250 s Relative mode to remove test lead resistance from low ohms measurements Min-Max-Average recording with Min/Max Alert to capture variations automatically Touch Hold to capture stable readings avoiding noisy signals Audible continuity, diode test and duty cycle Input Alert Classic design with new removable holster with built in test lead and probe storage Improved selectable sleep mode for long battery life Easy battery and fuse exchange without opening the complete case 87V 20 kHz 20000 / 6000

5 kHz 6000

Accessories and Ordering Information
Included Accessories TL75 test leads, AC72 alligator clips, holster, 80BK temperature probe (87V only), 9 V battery (installed), CD-ROM (users manual and technical notes) and operators guide. Ordering Information Fluke 83V Multimeter Fluke 87V True RMS Multimeter Fluke 87V/E Industrial Electrician Combo Kit

Specications Features

Functions Voltage DC Voltage AC Current DC Current AC Resistance Conductance Capacitance Frequency Temperature 80BK temperature probe
(Check the Fluke Web for detailed specications)
Maximum Range 1000 V 1000 V 10 A ** 10 A ** 50 M 60 nS 9999 F > 200 kHz -200 to 1090 C - 40 to 260 C 0.1 mV 0.1 mV 0.1 A 0.1 A 0.1 0.01 nS 0.01 nF 0.01 Hz

Max. resolution Accuracy

(0.1+1%) (0.5%+2) (0.4%+2) (1.2%+2) (0.4%+1) (1.0%+10) (1.0%+2) (0.005%+1) -
10 V (0.05%+1) 10 V (0.7%+2) 0.01 A (0.2%+2) 0.01 A (1.0%+2) 0.01 (0.2%+1) 0.001 nS (1.0%+10) 0.01 nF (1.0%+2) 0.01 Hz (0.005%+1) 0.1 C 1.0% 2.2 C or 2%
Accuracies are best accuracies for each function. * 87V accuracy is stated for 6.000 counts and resolution for 20.000 counts ** 20 A up to 30 seconds
Battery Life : Over 400 hours typical (alkaline). Size (without holster) (HxWxD): 186 mm x 86 mm x 32 mm Weight : 0.36 kg Lifetime Warranty
Fluke 87V: The ideal multimeter for measuring adjustable speed drives
The Fluke 87V DMM overcomes measurement problems caused by the adjustable speed motor drives. These drives adjust the speed of alternating current motors using pulse width modulation that generates a very noisy or chopped signal.
Ordinary DMMs may indicate voltage higher than the voltage actually supplied to the motor. Measurements may not agree with drive controls, and frequency measurements may be erratic. Bottom line: the technician cant tell whether a problem lies with the controls, drive or motor. With the press of a button, the Fluke 87V DMM solves these problems. The 87V blocks unwanted high frequencies generated by inverters and provides accurate and stable measurements of motor drives: AC voltage, frequency (to calculate motor rpm) and AC current (using the current clamp accessory).

Fluke 87V/E Industrial Electrician Combo Kit This new combo kit is based on the Fluke 87V and includes special accessories to make industrial troubleshooting even more productive. Save over 60% compared with the individual purchase price of all the accessories.
Fluke. Keeping your world up and running.

Fluke Corporation

P.O. Box 9090 Everett, WA USA 98206
Fluke Europe B.V. Fluke 87V True RMS Multimeter TL224 SureGrip Silicone Test Lead Set TP238 SureGrip Slim Reach Test Probe Set (insulated tips with 4 mm of exposed metal) AC220 SureGrip Alligator Clip Set Magnetic Hanger 80BK Temperature Probe C800 Hard Case
P.O. Box BD Eindhoven The Netherlands
For more information call:
In the U.S.A. (800) 443-5853 or Fax (425) 446 -5116 In Europe/M-East/Africa +31 (0)or Fax +31 (0)In Canada (905) 890-7600 or Fax (905) 890-6866 From other countries +1 (425) 446 -5500 or Fax +1 (425) 446 -5116
Visit us on the world wide web at:

http://www.uke.com

Recommended accessories with the new Fluke 80 Series V
80i400 AC Current Clamp (400 A) TPAK ToolPak, Meter Hanging Kit C90 Soft Case C800 Hard Case L210 Probe light and probe extenter

Fluke (UK) Ltd.

52 Hurricane Way Norwich Norfolk www.tti.co.uk NR6 6JB United Kingdom Tel: Tel.: 0700 Fax: 0701 E-mail: industrial@uk.uke.nl

http://www.uke.co.uk

Copyright 2004 Fluke Corporation. All rights reserved. Printed in the Netherlands 04/04 Data subject to alteration without notice. Pub_ID: 10718-eng

Fluke 83V and 87V

True-rms Digital Multimeters

Detailed Specifications

For all detailed specifications:
Accuracy is given as ([% of reading] + [number of least significant digits]) at 18 C to 28 C, with relative humidity up to 90 %, for a period of one year after calibration. For Model 87 in the 412-digit mode, multiply the number of least significant digits (counts) by 10. AC conversions are ac-coupled and valid from 3 % to 100 % of range. Model 87 is true-rms responding. AC crest factor can be up to 3 at full scale, 6 at half scale. For non-sinusoidal wave forms add -(2 % Rdg + 2 % full scale) typical, for a crest factor up to 3.
Fluke 87V ac voltage function specifications (true-rms)
Accuracy Function Range Resolution 600.0 mV 0.1 mV 6.000 V 0.001 V 60.00 V 0.01 V 600.0 V 0.1 V 1000 V 1V Using low pass filter 45 - 65 Hz (0.7 % + 4) (0.7 % + 2) 30 - 200 Hz 200 - 440 Hz 440 Hz - 1 kHz (1.0 % + 4) (2.0 % + 4)3 unspecified unspecified unspecified unspecified unspecified 1 - 5 kHz (2.0 % + 4) 5 - 20 kHz1 (2.0 % + 20)

~ V 2,4

(0.7 % + 2)

(1.0 % + 4)

+1%+4 -6 % - 45

unspecified

1 Below 10 % of range, add 6 counts. 2 The Fluke 87V is a true-rms responding meter. When the input leads are shorted together in the ac functions, the meter may display a residual reading between Frequency range: 1 kHz to 2.5 kHz. 4 A residual reading of up to 13 digits with leads shorted, will not affect stated accuracy above 3 % of range. 5 Specification increases from -1 % at 200 Hz to -6 % at 440 Hz when filter is in use.

and 30 counts. A 30-count residual reading will cause only a 2-digit change for readings over 3 % of range. Using REL to offset this reading may produce a much larger constant error in later measurements.
Fluke 83V ac voltage function specifications (average responding rms indicating)
Accuracy Function Range 600.0 mV 6.000 V 60.00 V 600.0 V 1000 V Resolution 0.1 mV 0.001 V 0.01 V 0.1 V 1V 50 Hz - 60 Hz (0.5 % + 4) (0.5 % + 2) (0.5 % + 2) (0.5 % + 2) (0.5 % + 2) 30 Hz - 1 kHz (1.0 % + 4) (1.0 % + 4) (1.0 % + 4) (1.0 % + 4) (1.0 % + 4) 1 kHz - 5 kHz (2.0 % + 4) (2.0 % + 4) (2.0 % + 4) (2.0 % + 4)2 unspecified
1 Below a reading of 200 counts, add 10 counts 2 Frequency range: 1 kHz to 2.5 kHz
Fluke 83V and 87V Detailed Specifications
DC voltage, resistance, and conductance function specifications

Function

Temperature specifications (87V only)
Temperature -200 C to +1090 C -328 F to +1994 F Resolution 0.1 C 0.1 F Accuracy1, % + % + 18
Range 6.000 V 60.00 V 600.0 V 1000 V 600.0 mV 600.0 6.000 k 60.00 k 600.0 k 6.000 M 50.00 M 60.00 nS
Resolution 0.001 V 0.01 V 0.1 V 1V 0.1 mV 0.1 0.001 k 0.01 k 0.1 k 0.001 M 0.01 M 0.01 nS
Accuracy Fluke 83V Fluke 87V (0.1 % + 1) (0.05 % + 1) (0.1 % + 1) (0.05 % + 1) (0.1 % + 1) (0.05 % + 1) (0.1 % + 1) (0.05 % + 1) (0.3 % + 1) (0.1 % + 1)
1 Does not include error of the thermocouple probe. 2 Accuracy specification assumes ambient temperature stable to 1 C.
For ambient temperature changes of 5 C, rated accuracy applies after 1 hour.
(0.4 % + 2)1 (0.2 % + 2)1 (0.4 % + 1) (0.2 % + 1) (0.4 % + 1) (0.2 % + 1) (0.7 % + 1) (0.6 % + 1) (0.7 % + 1) (0.6 % + 1) (1.0 % + 3)2 (1.0 % + 3)2 (1.0 % + 10)1 (1.0 % + 10)1
1 When using the REL function to compensate for offsets 2 Add 0.5 % of reading when measuring above 30 M in the 50 M range and
20 counts below 33 nS in the 60 nS range
Current function specifications

(45 Hz to 2 kHz)

Range 60.00 mA 400.0 mA6 6.000 A 10.00 A4 60.00 mA 400.0 mA6 6.000 A 10.00 A4 600.0 A 6000 A 600.0 A 6000 A
Resolution 0.01 mA 0.1 mA 0.001 A 0.01 A 0.01 mA 0.1 mA 0.001 A 0.01 A 0.1 A 1 A 0.1 A 1 A
Accuracy Model 831 Model 872, (1.2 % + 2) (1.0 % + 2) (1.2 % + 2)5 (1.0 % + 2) (1.2 % + 2)5 (1.0 % + 2) (1.2 % + 2)5 (1.0 % + 2) (0.4 % + 4) (0.2 % + 4) (0.4 % + 2) (0.2 % + 2) (0.4 % + 4) (0.2 % + 4) (0.4 % + 2) (0.2 % + 2) (1.2 % + 2)5 (1.0 % + 2) (1.2 % + 2)5 (1.0 % + 2) (0.4 % + 4) (0.4 % + 2) (0.2 % + 4) (0.2 % + 2)
Burden Voltage (typical) 1.8 mV/mA 1.8 mV/mA 0.03 V/A 0.03 V/A 1.8 mV/mA 1.8 mV/mA 0.03 V/A 0.03 V/A 100 V/A 100 V/A 100 V/A 100 V/A
1 AC conversion for Model 83 is ac coupled and calibrated to the rms value of a sine wave input. 2 AC conversions for Model 87 are ac coupled, true rms responding, and valid from 3 % to 100 % of range. 3 Model 87 is a true rms responding meter. When the input leads are shorted together in the ac functions, the Meter may display a residual reading between 1 and

30 counts. A 30 count residual reading will cause only a 2 digit change for readings over 3 % of range. Using REL to offset this reading may produce a much larger constant error in later measurements. A continuous up to 35 C; < 20 minutes on, 5 minutes off at 35 C to 55 C. 20 A for 30 seconds maximum; > 10 A unspecified. 5 Below a reading of 200 counts, add 10 counts. mA continuous; 600 mA for 18 hours maximum.
Capacitance and diode function specifications
Function Range 10.00 nF 100.0 nF 1.000 F 10.00 F 100.0 F 9999 F 3.000 V Resolution 0.01 nF 0. 1 nF 0.001 F 0.01 F 0.1 F 1 F 0.001 V Accuracy (1 % + 2)1 (1 % + 2)1 (1 % + 2) (1 % + 2) (1 % + 2) (1 % + 2) (2 % + 1)
1 With a film capacitor or better, using Relative mode to zero residual.

2 Fluke Corporation

Fluke 83V and 87V detailed specifications
Frequency counter specifications
Function Frequency (0.5 Hz to 200 kHz, pulse width > 2 s) Range 199.99 1999.9 19.999 kHz 199.99 kHz > 200 kHz Resolution 0.01 Hz 0.1 Hz 0.001 kHz 0.01 kHz 0.1 kHz Accuracy (0.005 % + 1) (0.005 % + 1) (0.005 % + 1) (0.005 % + 1) unspecified
Frequency counter sensitivity and trigger levels
Input RangemV dc 600 mV ac 6V 60 V 600 V 1000 V Duty Cycle Range 0.0 to 99.9 % Minimum Sensitivity (RMS Sine wave) 5 Hz - 20 kHz 0.5 Hz - 200 kHz 70 mV (to 400 Hz) 70 mV (to 400 Hz) 150 mV 150 mV 0.3 V 0.7 V 3V 7 V ( 140 kHz) 30 V 100 V Approximate Trigger Level (DC Voltage Function) 40 mV 1.7 V 4V
70 V ( 14.0 kHz) 40 V 700 V ( 1.4 kHz) 100 V Accuracy Within (0.2 % per kHz + 0.1 %) for risetimes < 1 s
1 Maximum input for specified accuracy = 10X Range or 1000 V.
Electrical characteristics of the terminals

V mV V

Overload ProtectionV rms 1000 V rms 1000 V rms
Input Impedance (nominal) 10 M < 100 pF 10 M < 100 pF 10 M < 100 pF (ac-coupled) Open Circuit Test Voltage
Common Mode Rejection Ratio (1 k unbalance) > 120 dB at dc, 50 Hz or 60 Hz >120 dB at dc, 50 Hz or 60 Hz > 60 dB, dc to 60 Hz Full Scale Voltage To 6.0 M 50 M or 60 nS 600 < 4.1 V dc < 4.5 V dc 1 mA
Normal Mode Rejection > 60 dB at 50 Hz or 60 Hz > 60 dB at 50 Hz or 60 Hz
Typical Short Circuit Current 6k 60 k 600 k 6 M 50 M 100 A 10 A 1A 1 A 0.5 A

1000 V rms 1000 V rms

< 7.3 V dc < 3.9 V dc

3.000 V dc

0.6 mA typical

V Hz maximum

MIN MAX recording specifications
Model 83V 87V Nominal Response 100 ms to 80 % 100 ms to 80 % (dc functions) 120 ms to 80 % (ac functions) 250 s (peak) (Model 87 only)1 Accuracy Specified accuracy 12 counts for changes > 200 ms in duration ( 40 counts in ac with beeper on) Specified accuracy 12 counts for changes > 200 ms in duration > 25 % of range Specified accuracy 40 counts for changes > 350 ms and inputs Specified accuracy 100 counts for changes > 250 s in duration (add 100 counts for readings over 6000 counts) (add 100 counts for readings in Low Pass mode)

1 For repetitive peaks: 1 ms for single events.

Fluke Corporation 3

Fluke 83V and 87V General Specifications
Maximum voltage between any terminal and earth ground: 1000 V rms Fuse protection for mA or A inputs: 44/100 A, 1000 V FAST Fuse Fuse protection for A input: 11 A, 1000 V FAST Fuse Display: Digital: 6000 counts updates 4/sec; (Model 87V also has 19,999 counts in high-resolution mode) Analog: 33 segments, updates 40/sec. Frequency: 19,999 counts, updates 3/sec at > 10 Hz Temperature: Operating: -20 C to +55 C; Storage: -40 C to +60 C Altitude: Operating: 2000 m Storage: 10,000 m Temperature coefficient: 0.05 x (specified accuracy)/ C (< 18 C or > 28 C) Electromagnetic compatibility: In an RF field of 3 V/m total accuracy = specified accuracy Relative humidity: 0 % to 90 % (0 C to 35 C); 0 % to 7 0% (35 C to 55 C) Battery type: 9 V zinc, NEDA 1604 or 6F22 or 006P Battery life: 400 hours typical with alkaline (with backlight off) Vibration: Per MIL-PRF-28800 for a Class 2 instrument Shock: 1 Meter drop per IEC 61010-1:2001 Size (HxWxL): 1.25 in x 3.41 in x 7.35 in (3.1 cm x 8.6 cm x 18.6 cm) Size with holster and flex-stand: 2.06 in x 3.86 in x 7.93 in (5.2 cm x 9.8 cm x 20.1 cm) Weight: 12.5 oz (355 g) Weight with holster and flex-stand: 22.0 oz (624 g) Safety: Complies with ANSI/ISA S82.01-2004, CSA 22.2 No. 1010.1:2004 to 1000 V Overvoltage Category III, IEC 664 to 600 V Overvoltage Category IV. UL listed to UL3111-1. Licensed by TV to EN61010-1.
Fluke Corporation PO Box 9090, Everett, WA USA 98206 Fluke Europe B.V. PO Box 1186, 5602 BD Eindhoven, The Netherlands For more information call: In the U.S.A. (800) 443-5853 or Fax (425) 446-5116 In Europe/M-East/Africa (31 40) 200 or Fax (31 40) 222 In Canada (800)-36-FLUKE or Fax (905) 890-6866 From other countries +1 (425) 446-5500 or Fax +1 (425) 446-5116 Web access: http://www.fluke.com/

Available from:

Measurably better value
Thurlby Thandar Instruments Ltd. Glebe Road, Huntingdon, Cambs. PE29 7DR U.K. Tel: 01480 412451, Fax: 01480 450409, e-mail: e-mail: sales@tti.co.uk Web: www.tti.co.uk

4 Fluke Corporation

Copyright 2005 Fluke Corporation. All rights reserved. Printed in the Netherlands 06/2005. Data subject to alteration without notice. 2161164 D-US-N Rev B Pub_ID: 10826-eng