Fostex VF-08 8-track Digital Multitracker
_______________________________________________________ Contents
I. Description II. Mixer features III. Recorder features IV. Selling Points vs. Competition V. Model 8340 SCSI Card
_______________________________________________________
The Fostex VF08 is the breakthrough of the digital multitracker that is positioned at the pricing divide between digital and analog MTRs. Inheriting a lot of technologies Fostex has developed in the long history of MTR designs, the VF08 offers 8-track digital recording, intuitive digital mixer, reputed A.S.P. digital effects, 99 scene memory, wave form display, 2 x XLR inputs with phantom power, and so on. In addition to those functions new powerful features include Mastering Mode, offering 10 x Mastering Library such as Live Mix, Pop Mix, Dance etc for easy and sophisticated stereo mastering production, and Training Mode to improve your skill playing to source recorded from a CD etc. The factory-installed 5.1GB drive offers as long as 2 hours of non-compressed 8-track recording, which is the longest in this class. Thanks to employment of the 3.5 IDE drive, users can easily upgrade the drive with a larger capacity anytime they want.

Mixer Section

8 tracks + 16 additional tracks recording with no data compression. 5.1GB E-IDE hard drive is factory installed giving 16 hours recording / reproducing (mono-track). HD capacity is to be increased in the future. Bounce Mode for easy track bouncing. Mastering Mode enables reproduction of master tracks 7-8 with mastering effects. In addition to manual EQ Reverb Comp Limiter settings, 10 x preset mastering libraries (Flat, Wet Mix, Light Mix, Live Mix, Pop Mix, Dance, Hard, 70s, Hall and Lo-Fi modes) are selectable for easy and quick operation. Training Mode offers slow reproduction without pitch change, center-cancelled reproduction and repeats reproduction between A-B points. 2-band EQ with Libraries. In addition to the regular shelving type, 36 libraries include bell type, LPF/HPF etc. S/PDIF digital I/O to export and import stereo signal digitally. Recorder Section Audio Scrubbing with waveform display for intuitive edits using professional-like Jog wheel. Non-destructive editing including Copy / Move-Paste / Erase. 99 song programs with title edit. +/- 6% vari-pitch by 0.1% step. Bar/Beat resolution. 99 Mark Points per program with title edits for quick location. Scene Sequence function enables to change mixing scenes by any mark points. Auto Punch In/Out with rehearsal function and Auto Loop. 2 x Input jacks with trim (Mic Line), on/off switch and peak LED: Phones as well as XLR inputs with phantom power. 1 x Fostex original A.S.P. multi-effects of professional quality offering as many as 38 effect patches. 99 Mixing Scene Memory (Fader/EQ/Pan/Effects) per program with title edits. Internal Tempo Mapping with metronome function offers output of MIDI Clock & Song Position Pointer as well as slave run to external MTC Sequencer. MTC/MMC compliance makes sync run / remote controlling with a sequencer. Important Selling Points Over Competition Uncompressed audio quality Comes with XLR inputs and phantom power Record time = 16 hours - mono , 2 hours - 8 tracks MIDI Time Code/MIDI Clock sync to external sequencers and computer recording software Waveform display for editing Digital S/PDIF input and output for burning CDs, transferring audio to external devices and/or computer Training mode helps learn music passages and eliminate recorded vocals

Model 8340 SCSI Card

Model 8340 is an optional SCSI card for model VF08 to give the following additional functions. Fast backup to external SCSI removable devices such as ZIP, ZIP250, DVD-RAM drives. Import and export of audio data in WAV file format via a DOS formatted (FAT16) disk using SCSI re-movable devices. With future software update on VF08, data backup to a CD-R/RW will be possible. The 8340 card can be retrofit to the VF08s slot on the right side by end-users. Installation guide is in the manual supplied with the card.

200 (352069)

VF08 Owners Manual

<V2.0 Supplement>

The VF08 software has been upgraded to v2.0, which supports the new "internal mastering function", as well as expands the function of save/load using a "SCSI" CD-RW drive. You can now record mastered materials onto a CD-RW/CD-R disc with the standard audio CD format. This supplement only handles instructions for the internal mastering function and save/load using a CD-RW/CD-R disc. See Save/Load of song data on the main manual about details for save/load using SCSI and S/P DIF digital signal.

<Note>

To saving/loading song data using a CD-RW drive, the optional Model 8340 SCSI card must be installed to the VF08. See page 115 of the main manual for details about how to install the option. For the detailed information about the Model 8340 SCSI card, contact your local Fostex distributor.

Table of Contents

Internal Mastering Function....3
Please read this first before carrying out operations in the internal mastering mode!.4 Rehearsing internal mastering....5 Performing internal mastering....6 About Start and End points....7
Save/Load using CD-RW/CD-R...8
Please read this first!....8 Caution on CD-RW drive....8 Care and handling of CD-RW/CD-R discs...8 About writing and reading speeds....8 Save/load of song data using a CD-RW drive...9 Saving data using a CD-RW drive (Backup)...10 Loading backup data from a CD-RW drive...12 Making an audio CD....14 Loading from an audio CD....17

<Glossary>

CD-RW (Compact Disc Rewritable)
A disc media that can be re-written as many times as you like. New data is written after the previously recorded data is erased.
SCSI (Small Computer System Interface)
An interface standard for computer peripherals standardized by ANSI (American National Standard Institute). Up to 7 peripherals, such as a hard-disk drive, MO drive and zip drive, can be daisychained.
CD-R (Compact Disc Recordable)
A disc media that can be written only once. Unlike a CD-RW disc, you cannot write data onto a recorded CD-R disc. If any error happens during recording to a CD-R disc, the disc cannot be used anymore.

Protect (Copy Protect)

A bit for indicating whether the digital copy is permitted or not. If the copy protect bit of an audio CD is on, you can make a digital copy once but cannot make a copy from the copied material.
CD-DA (Compact Disc Digital Audio)
The standard for compact disc for audio. A compact disc recorded by this format can be played back by a CD-ROM player built in a personal computer, as well as an audio CD player.
Internal Mastering Function
The "mastering mode" of the VF08 mixes tracks 1 through 6 down to tracks 7/8, and plays back them with the dedicated mastering effects so that you can record them to an external (analog or digital) master recorder (see figure 1). The internal mastering function, a newly added function for the VF08, expands the mastering mode, which allows transferring a mix-down material on tracks 7/8 to another (new) program on the current drive with adding the mastering effects. You can, therefore, produce a high quality final master within the VF08, with no need for an external master recorder (see figure 2). Furthermore, thanks to the save function using a CD-RW/CD-R disc, you can make an original audio CD by recording materials internally mastered using the internal mastering function to a CD-RW/CDR disc. See "Making an audio CD" on page 14 for details.

<Conventional mastering mode>
Digital Master Recorder Analog Master Recorder
<Newly added internal mastering function>

Mastering Effect

New Program

ST OUT S/P DIF OUT L R

Tracks 7 & 8

Tracks 1 & 2

<Figure-2>

<Figure-1>

The internal mastering function allows you to carry out all operations using the VF08 only.
<Please read this first before carrying out operations in the internal mastering mode!>
After executing internal mastering, a new program which saves a mastering material is automatically created on the current drive, whose program number is set to one greater than the current greatest program number. For example, if there are 8 programs (P01 through 08) on the current drive, after mastering a desired program data using the internal mastering function, a new program (P09) is automatically created and the mastering signals produced by the mastering function are recorded on tracks 1 and 2 of P09. Note that if the VF08 is under either of the following conditions, you cannot carry out internal mastering.
1. There are 99 programs already existed on the current drive even though there is enough recording space.
If you try to carry out internal mastering, "Can't New PGM!" is shown and the operation is ignored. To carry out internal mastering, delete an unnecessary program.
2. There is not enough remaining space even though there are less than 99 programs on the current drive.
If you try to carry out internal mastering, "Over Time!" is shown and the operation is ignored. To carry out internal mastering, erase unnecessary song data or delete an unnecessary program.
See "Deleting a program" on page 57 and "Erasing track data" on page 61 in the VF08 owner's manual.
Rehearsing internal mastering
Before performing the internal mastering, you can rehearse it as many times as you like, while adjusting the track 7/8 level and sound effects. In the following description, we assumes that a bounced material is recorded on tracks 7/8 of the playback program. Headphones for monitoring are connected to the [PHONES] jack.

[PHONES] [TRACK EDIT] [MASTERING] [ENTER/YES]
INPUT A BAL INPUT B BAL PHONES

ST OUT FOOT SW

TRACK EDIT GUITAR GUITAR

MIX PARAMETER

SCENE SCENE SEQ.
DIGITAL MULTITRACKER PGM FADER MAP
PAN LINE MIC LINE MIC MIN MAX

EFFECT

BOUNCE MODE

ON/OFF

2TRK MODE

MASTERING TRAINING

ACCESS

CH ON/OFF PEAK

PHANTOM F1 F2 F3

TRACK STATUS

TRACK STATUS / TRACK SEL

STATUS /SEL JOG SHUTTLE

7/8 2TRK MASTER

CURSOR EXIT /NO EJECT

ENTER /YES

1[JOG]

TIMEBASE SEL

UNDO /REDO

1[SHIFT]

LOCATE

MARK DELETE REWIND F FWD

-20 -30 -40

AUTO PUNCH

VARI PITCH

WAVE FORM SCRUB

RECORD

7[STOP] + [REWIND]
LOCATE ABS 0 LOCATE REC END

[7/8 FADER]

[MASTER FADER]

4[PLAY] 6[STOP]

4. Press the [PLAY] key to start playback from the beginning of the selected program.
The VF08 starts playback, while the display keeps showing the screen for adjusting the mastering effects. Tracks 1 and 2 are internally set to "input monitor", allowing you to check over-level via the peak LED indicators. You can monitor the mastering sound through headphones by raising the track 7/8 fader and/or [PHONES] level control. The mastering levels are shown on the level meters at the right on the screen.
1. Select the desired program for mastering.
To select the desired program, while stopped, press the [TRACK EDIT/PGM] key while holding down the [SHIFT] key, and select the program using the [JOG] dial, then press the [ENTER/YES] key.
2. Set the [MASTER] fader to the "0" position. 3. press the [MASTERING] key.
The VF08 enters the mastering mode and the display shows the mastering screen in which you can adjust the mastering effects. The [MASTERING] key lights up in red, while the [TRACK STATUS/TRACK SEL] keys of tracks 7/8 and the master channel light up in green.
5. During playback, adjust track 7/8 levels using the 7/8 fader, as well as EQ and effect settings if necessary.
Set the levels properly so that the PEAK LED indicators do not flash or light frequently. Note that levels may increase by changing EQ or compressor parameters. When controlling the sound characters and level, you should not only monitor the level meters and listen to the sound, but also monitor the PEAK LED indicators. To adjusting the mastering effect parameters on the mastering screen, use the [CURSOR] (up/down) keys to select a parameter and the [JOG] dial to change the parameter value.
<screen for adjusting the mastering effects>

<Hint>

On the mastering screen, you can tailor the sound by adjusting EQ settings (HI, MID and LOW), as well as the ambiance and compressor. See page 71 in the VF08 Owner's Manual for details about the mastering effects.

"Please wait" appears on the display for a few seconds, and the internal mastering mode quits, while the VF08 locates the beginning (ABS 0) of the newly created program. The ABS time at which you press the [STOP] key is registered with the "End point" of the new program. The following screen example shows that a title named "Song Data-1" is mastered onto a new program named "P09". As shown in the example below, "Mst<-" is prefixed to a mastered program title, so that you can distinguish mastered programs from other programs. The screen can show up to the first 12 characters of a title name.
<Note: You cannot undo an internal mastering take.>
You cannot undo an internal mastering take. If you are not satisfied with the result, try again from the beginning. If you do not need a previously recorded program, delete the program according to the procedure described in "Erasing a Program" of the owner's manual.
A title example recorded using the internal mastering mode
<Note: The vari-pitch setting is not effective.>
When recording a take in the internal mastering function, the vari-pitch setting is not effective and the take is always recorded at the normal speed.
3. Playback the newly created program (P09, in the example above) to check the result.
You can adjust the playback levels of mastered tracks using track faders 1 and 2. Read the following "Hint" carefully before making an original audio CD from mastered materials.
<About Start and End points>
As described earlier, the starting and ending times of internal mastering are automatically registered as "Start point" and "End point" respectively, which can be used for track editing (copy, move and erase) for the newly created program (see the illustrations below). This function is very convenient for making an audio CD from mastered materials, because data between "Start point" and "End point" is automatically transferred to a CD-RW/CD-R disc. Note that you cannot make an audio CD using the VF08 save function (described later) without setting these two points.
Data transferred to a CD-RW/CD-R disc
Start point (automatically registered) End point (automatically registered)

New program (Tracks 1 & 2)

Internal mastering

Original program (Tracks 7 & 8)
Start point of internal mastering
End point of internal mastering
The "Start point" and "End point" which have been automatically set can be checked after completing mastering by the following procedure. 1. Press the [TRACK EDIT/PGM] key while the VF08 is stopped.
The display shows the screen for track editing, where "Copy Paste" flashes.
You can edit the "Start point" and "End point" before creating an audio CD, allowing adjustment of intervals between songs. We recommend to set the "Start point" and "End point" of the new program created by the internal mastering to desired times before creating an audio CD.

flashing

2. Press the [ENTER/YES] key.
The display shows the screen for selecting an original and destination tracks for copy/paste.
4. After checking the "Start" and "End" points, press the [EXIT/NO] key to quit the track edit mode.
The display returns to the previous screen before performing step 1. See page 14 about how to make an audio CD from mastered materials.
3. Press the [ENTER/YES] key again.
The display shows the screen for selecting edit points, in which you can check "Start" and "End" points that hold the beginning and end points of the recording respectively (pointed by arrows below).
When recording more than one song continuously to a CD-RW/CD-R disc, the VF08 automatically record an approximately 2-second silence after each END point.
Start point End point Start point Start point End point End point
Silence (about 2 seconds)
Save/Load using CD-RW/CD-R

Please read this first!

<Check compatibility of CD-RW drive!>
A CD-RW drive to be used for saving/loading VF08 song data or making audio CD from VF08 data must be compatible with the VF08. If you use a drive that is not operation-confirmed by Fostex, you may have a problem. You can check operation-confirmed CD-RW drive by the following ways.
<Customers who are accessible to Fostex internet web site>
Confirm the model number and manufacturer of operation-confirmed CD-RW drive by accessing the following URL.
<http://www.fostex.co.jp/int/pages/sets/faqset.htm>
<Customers who are not accessible to Fostex internet web site>
Contact your local Fostex distributor.
<Care and handling of CD-RW/CD-R discs>
With a CD-RW drive, you can use not only CD-RW discs but also CD-R discs. Note that CD-R discs has some restrictions as shown below.

CD-RW disc

CD-R disc

Unlike data load using other SCSI drives, data loading using a CD-RW drive is taken place after a new program is created in the current drive (the load destination). You cannot overwrite an existing program with the loaded data. The newly created program is numbered the next number to the highest existing program number.
Trk 1 & 2 & 3 & 4 & 5 & 6 &7 & 8 & 9 & 10 & 11 & 12 & 13 & 14 & 15 & 16 & 17 & 18 & 19 & 20 & 21 & 23 & 24 Load Program 1 (P01)
You can save or load data using a CD-RW drive only with the FDMS-3 (Fostex Digital Management System3) format and CD-DA format. Note that, unlike other SCSI devices, you cannot save or load data with the WAV file format. See the main manual for saving/loading a WAV file.

Creating an audio CD

You can make an audio CD by recording sound data of tracks 1 and 2 between the Start point and End point to a CD-RW/CD-R disc. It is also possible to record some mastered materials continuously.

Loading an audio CD data

You can load a material on a (commercial or created) audio CD to a program of the VF08. Audio data is loaded to a new program automatically created by the VF08, which is the same way as backup data loading. The VF08 never overwrites the existing program.
<Notes for using a CD-RW drive>
Use a high-impedance SCSI cable for connection between the VF08 and a CD-RW drive. The cable length should be as short as possible. Only a single SCSI device can be connected to the VF08 SCSI port. Attach an active terminator to the CD-RW drive used. If you attach a terminator that is not active, you may not be able to save or load data correctly.
High impedance SCSI cable Attach an active terminator
Installed the Model 8340 Half pitch 50-pin type connector
Saving data using a CD-RW drive (Backup)
In the following procedure, we assume that a CD-RW drive is connected to the SCSI port of the Model 8340 installed in the VF08 and a non-recorded CD-RW/CDR disc is used. 5. While BkUp flashing, press the [ENTER/YES] key.
The display shows the screen for selecting a program to be saved (the program number of the selected program flashes).

Do not carry out any VF08 key operation until the access process to the CD-RW/CD-R disc is completed.

flashing recorded space

1. After turning on both the VF08 and the CD-RW drive connected, insert a disc to the CD-RW drive. 2. Press the [SETUP] key of the VF08 to enter the setup mode.
The display shows the screen for selecting the setup menu.
By rotating the [JOG] dial, you can select a desired program number/title from among available programs in the VF08 current drive. The recorded space of the selected program is also shown. If you select a program which requires more than one disc for saving, the display shows the required number of discs (see the screen example below).
3. Use the [JOG] dial to select (highlight) Save PGM and press the [ENTER/YES] key.
The display shows the screen for selecting a save device, where SCSI is flashing.

number of discs

6. After selecting a program, press the [ENTER/YES] key.
The display shows the screen as below.
In the example above, the selected program data will be saved to a CD-RW/CD-R disc with the backup number B01. The program title is copied to the backup title (you can not edit it). By rotating the [JOG] dial when the above screen is shown, you can also select Eject, besides B01. If you select Eject and then press the [ENTER/YES] key, the disc will be ejected.
4. While SCSI is flashing, press the [ENTER/YES] key.
After briefly showing the model name of the connected CD-RW drive, the display shows the screen for selecting a save mode, where BkUp (backup) is flashing. To save (backup) song data, select BkUp. To make an audio CD, select CD-DA or Setup. This procedure describes how to save song data, so we select BkUp here. See making an audio CD described later for details about how to make an audio CD.
7. While B01 is shown, press the [ENTER/YES] key.
The VF08 starts the save operation. The recorded space shown on the display is counted down while the save operation progresses. It will take some time for saving all data. The following display example shows that the data of the selected program number is being saved to the backup number B01.
flashing When completing the save operation, Save Completed! appears on the display (as shown below) and the VF08 stops access to the drive, while the disc in the CD-RW drive is automatically ejected.

<Hint 1>

In the description for saving data above, we assume to use a non-recorded CD-RW/CD-R disc. If you use a recorded disc (including a disc on which computer data is recorded), also note the following.
When saving data to more than one disc, the first disc will be ejected when it is full (i.e. there is no more recording space on the disc), while Insert Disk! appears on the screen. After inserting the second disc, the VF08 automatically resumes the save operation. After completing the save operation, the final disc is ejected and the above screen appears. (See <Note> below).

By performing step 5 in the save operation procedure shown above (While BkUp is flashing, press the [ENTER/YES] key.) When a recorded disc is inserted, the display shows a warning message, followed by the confirmation screen (where Sure? flashes). With this screen, you can choose whether erasing the recorded data or ejecting the disc.
You cannot abort the save operation before completed. Especially during the save operation to more than one disc, if you happen to press the [EXIT/NO] key while removing or inserting a disc, you have to redo the save operation from the beginning with the first disc.
<Note for saving data to more than one disc>
If you save data to more than one disc, we recommend to put a number on each disc in the saving order (such as DISC-1, DISC-2, etc.) so that you will easily know the order for inserting discs when loading data.
8. Press the [EXIT/NO] key (or the [STOP] key) to exit the Setup mode.
To erase the existing (recorded) data
Press the [ENTER/YES] key while both ERASE and Sure? are flashing. The display shows the screen below and the VF08 starts erasing the disc. As the erase process progresses, the number of flashing * increases from left to right.

<About save error>

If an error occurs for some reason during the save operation, the error message as below appears. If it appears, press the [EXIT/NO] key. The display returns to the previous screen before performing the save operation. Note that saved data before the error message appears is all invalid.
If the message above appears while saving data to a CD-R disc, you can no longer use the disc.
Increases as the process progresses.
Immediately after completing erasing the disc, the display shows the same screen (for selecting a program to be saved) which appears after step 5 is performed. Hereafter, perform the same procedure as described above.

To eject the disc

Use the [JOG] dial to highlight Eject (flashing) and press the [ENTER/YES] key. The disc is ejected while the display shows Insert Disk!. By inserting a disc, you can start the save operation again from the beginning.

<Hint 2>

If you try to save data to a recorded CD-R disc, the display shows a warning message saying Not Writable, followed by a message saying Insert Disk as below.
Loading backup data from a CD-RW drive
In the following procedure, we assume that a CD-RW drive is connected to the SCSI port of the Model 8340 installed in the VF08 and a CD-RW/CD-R disc to which data has been saved is prepared.
1. After turning on both the VF08 and the CD-RW drive connected, insert the disc to the CD-RW drive.
If you load song data which is saved to more than one disc, set DISC-1 first. If you set the other disc and go on the following procedure, the VF08 automatically recognized that the disc order is not correct and the display shows Wrong Disk, followed by Illegal No! momentarily, and the disc is automatically ejected.
After briefly showing the model name of the connected CD-RW drive, the display shows the screen for selecting a load mode, where BkUp (backup) is flashing. To load song data saved, select BkUp. To load a material from an audio CD, select CD-DA. This procedure describes how to load song data, so we select BkUp here. See Loading from an audio CD described later for details about how to load a material from an audio CD.
2. Press the [SETUP] key to enter the setup mode.
3. Use the [JOG] dial to select (highlight) Load PGM and press the [ENTER/YES] key.
The display shows the screen for selecting a load device, where SCSI is flashing.
5. While BkUp is flashing, press the [ENTER/YES] key.
The display shows the backup number and title, as well as recorded space.
By rotating the [JOG] dial, you can select a desired program number/title from among available programs in the VF08 current drive. You can also select Eject. If you select Eject and press the [ENTER/YES] key, the disc is ejected. When you load song data which is saved to more than one disc, the display also shows the disc number currently set. The example below shows DISC-1 is set.
<Display example for loading>
If there is not enough available space for loading on the current drive, the display shows Disk Full! and the display returns to the previous screen.
When completing the load operation, Load Completed! appears on the display (as shown below) and the VF08 stops access to the drive, while the disc in the CD-RW drive is automatically ejected.

flashing light up

6. While the desired backup number/title is shown on the display, press the [ENTER/YES] key.
The display shows the screen for creating a new program on the current drive, to which data will be loaded (New PGM lights). When loading data from more than one disc, the first disc will be ejected immediately after all disc data has been loaded, while Insert Disk! appears on the screen. After inserting the second disc, the VF08 automatically resumes the load operation. After completing loading all the discs, the above screen appears.

light up

You cannot abort the load operation before completed.
As described earlier, when loading data from a CD-RW drive, the VF08 creates a new program on the current drive, which is the load destination. Therefore, New PGM is shown on the right of the flashing program number. The program number for the newly created destination program is the next number to the highest existing program number. For example, if there are 8 existing programs (P01 through P08) on the current drive, the newly created program is numbered P09.
8. Press the [EXIT/NO] key (or the [STOP] key) to exit the setup mode.

<About load error>

If an error occur for some reason during the load operation, the error message as below appears. If it appears, press the [EXIT/NO] key. The display returns to the previous screen before performing the load operation. Note that loaded data before the error message appears is all invalid.
If you rotate the [JOG] dial while the above screen (Destn PGM Select) is shown, you can select an existing program on the current drive as the destination. However, as mentioned earlier, when loading data using CD-RW you cannot actually load data to the existing program by overwriting the program data. If you press the [ENTER/YES] key (see the next step) while selecting an existing program as the destination, the display shows Void! and the VF08 ignores the operation.
7. While New PGM is shown, press the [ENTER/YES] key.
The VF08 starts the load operation. The recorded space shown on the display is counted down while the load operation progresses. It will take some time for loading all data. The following display example shows that the data of the backup number B01 is being loaded to P08 which is newly created on the current drive.

Making an audio CD

The following procedure describes how to record mastered songs (using the internal mastering function) to a CDRW/CD-R disc to make an audio CD (CD-DA format). The Save PGM menu in the Setup mode, which is used for saving song data, is also used for making an audio CD.
<Basic information>
INPUT A BAL INPUT B BAL PHONES ST OUT FOOT SW

CD-RW/CD-R disc

DIGITAL MULTITRACKER ACCESS
TRACK EDIT GUITAR GUITAR PGM

DELETE

REWIND
When making an audio CD using the VF08, internal mastering materials on the current drive are recorded to a CD-RW/CD-R disc (by the CD-DA format). As we explain in Save/load of Song Data using a CD-RW drive on page 9, you can record not only a single song but also multiple songs continuously. When recording more that one songs continuously, the VF08 automatically inserts a 2-second silent space between songs.

Start point

End point Start point

Start point End point

End point
If an audio CD is made using a CD-RW disc, it can be played back only by a player that supports CD-RW playback. You cannot playback such a disc by a conventional CD player that does not support CD-RW playback.
In the following procedure, we assume that one or more mastering programs exist and a CD-RW drive is connected to the SCSI port of the Model 8340 installed in the VF08 and a non-recorded CD-RW/CD-R disc is used.
4. Press the [ENTER/YES] key while SCSI flashes.
After showing the model name of the connected CD-RW drive, the display shows the screen for selecting the save mode, in which BkUp flashes. To carry out making an audio CD, select CD-DA. If you need to change the copy protection setting (the default setting is OFF), select Setup (for setting writing conditions). If you make an audio CD without changing the copy protection setting, skip steps 5 and 6 below and go to step 7.
<Note> Key operations of the VF08 should be done after completing access to a CD-RW/CD-R disc.
1. After turning on the power of both the VF08 and a connected CD-RW drive, load a non-recorded disc to the CD-RW drive. 2. Press the [SETUP] key to enter the Setup mode. 3. Use the [JOG] dial to select (highlight) the Save PGM menu and press the [ENTER/YES] key.
The display shows the screen for selecting the device to which the data is saved. SCSI flashes.
5. Use the [JOG] dial (or the [CURSOR] < > key) to select Setup and press the [ENTER/YES] key.
The display shows the CD-DA Setup screen, on which you can select the copy protection setting (see the next page).

Copy protection setting

You can restrict the disc copy (duplication) capability of an audio CD you are going to make.
ON A disc you made can be copied to other digital device once. OFF A disc you made can be copied to other digital device as many times as required (default). To change the setting, press the [ENTER/YES] key when the CD-DA Setup screen is shown. The current setting starts flashing, showing it can be edited. While flashing, use the [JOG] dial to select ON or OFF, then press the [ENTER/YES] key to confirm.
9. Use the [JOG] dial to select a desired program and press the [ENTER/YES] key.
The selected program is set to the first track.
6. After setting the copy protection, press the [EXIT/NO] key.
The display returns to the screen for selecting the save mode, in which CD-DA now flashes.
To record a single song to a CD-RW/CD-R disc, select a program and press the [ENTER/YES] key, and then go to step 10. To record more than one song to a CD-RW/CD-R disc, repeat the procedure for selecting a program described above (i.e. use the [JOG] dial to select a program and press the [ENTER/YES] key) until selecting all desired programs, and then go to step 10.

The display shows the screen for selecting the device from which the data is loaded. SCSI flashes.

<Warning message>

The warning message for copyright shown on the screen is as follows.
Warning! You are responsible for use of this digital device. Be sure to abide by the copyright conditions of the source material. Press Enter/Yes key if you agree with the above.
When loading data using the S/P DIF digital signal, the same message also appears after selecting the load device to SP DIF and pressing the [ENTER/YES] key.
If you do not agree with the warning message contents, press the [EXIT/NO] key to quit loading. The display briefly shows Set Disable and Cant Loading, then returns to the mode select screen. If you agree with the warning message contents, go to the next step to continue the operation.
To load more than one track, repeat steps 7 through 8 above. The following screen example shows that tracks 1 and 2 will be loaded to program 05 and 06 respectively. The track time is also shown to the left of each program number.
6. If you agree to the message contents, press the [ENTER/YES] key.
After showing Set Enable!, the display shows the screen for selecting the song(s) to be loaded. If there is more than one track recorded on the audio CD, flashes, showing that you can select a desired track. If there is only one track recorded on the audio CD. is not shown on the screen.
When loading from a audio CD, no title is shown when selecting the track.
If you are going to load tracks 1 and 3 in the example above, instead of tracks 1 and 2, track 3 will be loaded to program 06 (see the screen example below).
<When only one track is recorded>
<When more than one track is recorded>
7. Use the [JOG] dial to select a track number to be loaded and press the [ENTER/YES] key.
The destination program number starts flashing, which is one greater than the highest program number among those available on the current drive. This means a track is going to be loaded to a new program. For example, if there are 4 programs available on the current drive, the destination program number(s) on the current drive and then perform step 7 above again. If there are already 99 programs on the current drive, Disk Full! appears and no destination program number is shown. In such a case, delete the unnecessary program(s) on the current drive and then perform step 7 above again.
However, if you select track 2 after selecting tracks 1 and 3, the VF08 automatically reassigns track 2 to program 06 and track 3 to program 07 (see the screen example below).
9. After specifying track(s) to be loaded, press the [ENTER/YES] key while holding down the [RECORD] key.
The VF08 starts loading tracks to the current drive. The following screen example shows that track 1 is now being loaded to program 08 on the current drive.