GUARANTEE (E)

From the moment your Geemarc product is purchased, Geemarc Telecom SA guarantee is for the period of one year. During this time, all repairs or replacements (at our option) are free of charge. Should you experience a problem then contact our helpline or visit our website at www.geemarc.com. The guarantee does not cover accidents, negligence or breakages to any parts. The product must not be tampered with or taken apart by anyone who is not an authorised Geemarc representative. The guarantee of Geemarc Telecom SA in no way limits your legal rights. IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND MUST BE RETAINED AND PRODUCED IN THE EVENT OF A WARRANTY CLAIM Please note: The guarantee applies to the United Kingdom only.
For product support and help visit our website at www.geemarc.com telephone or fax DECLARATION: Hereby Geemarc Telecom SA declares that this product is in compliance with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section 3. GARANTIE (F) Cet appareil est garanti 1 an pices et main-d'oeuvre. La date d'achat figurant sur le ticket de caisse fera foi. Cette garantie s'exerce sous rserve d'une utilisation normale de l'appareil. Les dommages occasionns par les surtensions lectriques, la foudre ou par un choc sur l'appareil ne peuvent en aucun cas tre couverts par la garantie. En cas de problme fonctionnel et avant de nous retourner votre appareil, contactez notre service aprs vente de : 8h30 12h30 et de 14h00 17h00 du Lundi au Jeudi et de 8h30 12h30 et de 14h00 16h30 le Vendredi. TEL. SERVICE APRES VENTE : 99
Parc dActivits du Basroch 2, rue Galile 59760 Grande Synthe Ce produit respecte les exigences de compatibilit lectro-magntique et de scurit lectrique demandes par la directive europenne RTTE. Par ailleurs il est compatible avec les diffrents rseaux tlphoniques europens (normes TBR21/37/38).

ED.01 UGAPOLLO

User guide Notice dutilisation

APOLLO

SETTING UP 1 - CONNECTING TELEPHONE The plug at the end of the lead should be connected to the telephone socket.
Voltages present on the telecommunication network are classified TNV-3 (Telecommunication Network Voltage) according to the EN60950 standard.
INSTALLATION 1 - RACCORDEMENTS Branchez le conjoncteur tlphonique dans la prise tlphonique murale.
Les tensions prsentes sur ce rseau sont classes TRT-3 (Tension de Rseau de Tlcommunication) au sens de la norme EN60950.
2 - RINGER SETTING A switch located bellow the handset allows to switch high ( ) or low ( ) the ringer. 3 - WALL MOUNTING To keep your handset in vertical position, slide out, turn around and slide back in the wall mounting handset clip (which can be found in the base unit, just below where the ear piece locates), this ensure that the handset stays firmly in position. USING THE TELEPHONE: 1 - ANSWERING INCOMING CALLS When an incoming call is received, the telephone will ring. To answer the call lift the handset and speak. 2 - MAKING A CALL Lift the handset, await the dial tone and dial required number. On completion of the call, carefully replace the handset in the cradle. 3 - LAST NUMBER REDIAL Lift the handset, await the dial tone and press the button. The previously dialled number will be AUTOMATICALLY RE-DIALLED. 4 - R, * & # BUTTONS: These are used with the new services provided on digital exchanges. For details please contact your network operator. 5 - MUTE BUTTON If you wish to speak privately to someone else in the room (without your caller overhearing) press and hold the button. Your caller may still be heard during the MUTE operation. To button. resume normal conversation , release the

T e l e c o m

Ue gie sr ud Ntc duiiain oie 'tlsto
Handset earpiece volume control Ringer light Three 'one touch' memories Ten 'two touch' memory locations
Rglage du volume de lcouteur Indicateur lumineux de sonnerie 3 mmoires directes 10 mmoires indirectes
CAUTION : This telephone product is specifically designed for people with hearing difficulties and is provided with a handset earpiece volume switch for individual requirements. Due care must be taken by all users that the handset earpiece volume switch is set to the lowest level acceptable by each respective user. Care should therefore be exercised to ensure that any naive users are familiar with this requirement. ATTENTION : ce tlphone peut tre destin aux personnes ayant des problmes daudition. Il possde un couteur volume variable. A la premire utilisation, assurez-vous que le commutateur de rglage du volume de lcouteur soit positionn au minimum. Les personnes malentendantes pourront par la suite augmenter le volume pour ladapter leur audition.

GB USER INSTRUCTIONS

Please read this User Guide carefully in order to get the very best results from your telephone.

CONDITIONS OF USE

Your Geemarc BB10 has been approved for use on private direct exchange lines and business lines. Please note that the telephone is not suitable for use as an extension to a pay phone unless it is a private pay phone carrying the appropriate CE label and is connected to the telephone network by means with a modular plug. The apparatus has been approved for the use of the following facilities: - Simple telephone operation with ability to make calls to the 999 & 112 emergency services. - Multi Frequency (TONE) dialling. - Handset Earpiece volume control : Hi/Med/Normal. - Ringer light - Three 'one touch' memories for storing alternative carrier access codes (or normal telephone numbers). - Ten 'two touch' memory locations. - Automatic storage of Last Number Dialled. - Timed Break recall. - Microphone mute.
Any other usage will invalidate approval of the apparatus if as a result, it then ceases to conform to the standards against which approval was granted. DECLARATION: Hereby Geemarc Telecom Ltd declares that this telephone is in compliance with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EEC and in particular article 3 section 1a, 1b and section 3.

TELEPHONE CONNECTION

The plug at the end of the lead should be connected to the telephone socket. Note that the plug will only fit the correct way round. The unit must be sited close to one of the new modular telephone sockets. Should you not have a modular telephone socket, please contact your Network provider. There is no limit to the number of sockets you can have installed in your home. However, there is a limit to the number of telephones you can operate on your exchange line. Installing too many telephones will overload the line which would inhibit the telephones from ringing. To avoid overloading your exchange line there is a method of calculating the number of telephones you can use. Add all the Ringer Equivalence Numbers (abbreviated REN) together, which are marked on the base of each telephone. Numbers differ so do check. The numbers when added
together must total 4 or less. Sometimes British Telecom telephones are unmarked but they can generally be assumed to have a REN of 1.0. If in doubt, please check with your British Telecom Sales Office. The REN value of your Geemarc BB10, is 1.0. RINGER 1 - A switch located above the handset microphone allows the ringer to be switched On or Off. 2 - If you dont like the ringer melody, you can choose a new one by changing the setting as follows: Low 7 Med 8 High 9

OPERATION

1 - LAST NUMBER REDIAL ( ) BUTTON If the telephone number you have called is engaged or if you want to repeat the call to the number you dialled previously, lift the handset, await dial tone and press the button. The previously dialled number will be AUTOMATICALLY RE-DIALLED. Up to 31 digits can be stored in the redial memory. For some Network services (home banking) or PABXs it may be necessary to insert a pause. Press when you need to insert a pause or to store a pause in the memory. BUTTON 2- / If you wish to talk privately to someone else in the room - without your caller overhearing button. Your - press and release the / caller may still be heard during the Mute operation. To resume normal conversation, button. press and release the / This button is also used in the programming process when storing telephone numbers in the one and two touch memories. 3 - RECALL, S & # BUTTONS These are used with the new services provided on digital exchanges. For details please contact your Network operator. 4 - HANDSET EARPIECE VOLUME CONTROL CAUTION : This telephone product is specifically designed for people with hearing difficulties and is provided with a handset earpiece volume switch for individual requirements. Due care must be

Tone 1 Tone 2 Tone 3

The default setting is 6. CAUTION : when the ringer has been set to the Off setting (digit 0), an incoming call will be indicated by the handset strobe light flashing. The ringer will be automatically returned to the previous setting (1 to 9) when the handset is lifted from the base unit. To set new ringer tone: - Lift handset. button. - Press the - Press the # button. - Press a number from 1 to 9.
taken by all users that the handset earpiece volume switch is set to the lowest level acceptable by each respective user. Care should therefore be exercised to ensure that any naive users are familiar with this requirement. The handset earpiece volume can be adjusted by moving the Volume switch, located above the handset microphone, to High, Medium or Normal.
7 - STORING TELEPHONE NUMBERS a) 'One touch' locations 1. Ensure telephone is plugged into telephone socket and lift handset. button. 2. Press 3. Press one of the 'One touch' direct memory buttons, M1, M2 or M3. 4. Dial the telephone number you wish to store. button again. 5. Press the 6. Repeat steps 2 to 5 for the remaining two 'One touch' locations. 7. Replace handset. b) 'Two touch' locations 1. Ensure that telephone is plugged into telephone socket and lift handset. button. 2. Press 3. Press MEM button. 4. Press any button 0 to 9 on the keypad under which you wish to store the telephone number. 5. Dial the telephone number you wish to store. button again. 6. Press the 7. Repeat steps 2 to 6 for any other numbers you wish to store allocating a different keypad number for each and then replace the handset. 8 - DIALLING STORED TELEPHONE NUMBERS a) 'One touch' locations - Lift handset, await dial tone and press appropriate direct memory button M1, M2 or M3. The stored number will be dialled out automatically.
5 - USING THE TELEPHONE Having connected the telephone to the telephone socket, lift the handset, await dial tone, and dial required number. On completion of the call, carefully replace handset in cradle. 6 - MEMORY OPERATION Your telephone can store up to 3 'One touch', and 10 'Two touch' telephone numbers. Each telephone number must be stored in a specific memory location and can be up to 21 digits long. If you wish to store a number having more than 21 digits (as may be required, for example, by international numbers preceded by a 3 or 4 digit national operator access code), it is suggested that the 3 or 4 digit access code is stored in a 'One touch' location and the international number stored in any other location. Note : Numbers stored in the memory may be lost if the telephone is disconnected from the telephone line.
Wall mount template / Montage mural 100mm
b) 'Two touch' locations - Lift handset, await dial tone. press the MEM button followed by the keypad button under which the desired number is stored. The stored number will be dialled out automatically. c) To dial a number partly stored in a 'One touch' location (such as an access code) with the remaining part in another location, lift handset and press the 'One touch' location button under which the 3 or 4 digit access code is stored and then either press: (i)The 'One touch' location button where the remainder of the number is stored, or (ii) The MEM button followed by the location button 0-9 under which the remainder of the number is stored. Note : If you wish to change a number in a memory location, simply follow the instructions for storing a number. Entering the new number will automatically erase the previous number. 9 - WALL MOUNTING Use this template to mark the screw hole centres. Slide out, turn around and slide back in the wall mounting handset clip (which can be found in the base unit, just below where the ear peice locates), this ensures that the handset stays firmly in position.