Libra Wirefree Bell Push & 200m Chime with Light
Instructions for Model No. D346

Pack Contents

q q q q
Bell Push Door Chime Door Chime wall hanging bracket (incl screws and wall plugs for mounting) Adhesive pad and screws for mounting the Bell Push

You will need

2 x LR14 (C) alkaline batteries for the Door Chime. We recommend that only long-life alkaline batteries are used (eg Duracell or Energiser). This product will not work with NiCd rechargeable batteries. q A small flathead screwdriver q A Philips crosshead screwdriver

Installation

Please note: positioning the Bell Push or Door Chime on or near metal structures or reinforced PVC doors or door frames may reduce the transmission range.

CR2032+

Bell Push
You can attach the Bell Push directly on to your door frame using the adhesive pad making sure the surface on which it is to be placed is clean and dry. Alternatively open the front cover using a flathead screwdriver (Diagram 1) and mount using the screws provided (See Diagram 2), ensuring that the rubber grommets (J in Diagram 2) remain in place. To ensure weather proofing is maintained, always mount the Bell Push in the upright position shown in Diagram 2 and replace the front cover securely. When the Bell Push button is pressed, the Confidence Light (A on Diagram 1) will illuminate to reassure the caller that the Bell Push is working. When it does not illuminate the battery needs replacing. Use a CR2032 Lithium Coin Cell battery, inserting it as shown in Diagram 3.

32+ CR20

- LR14 (C) + - LR14 (C) +

Door-Chime

Remove the battery compartment cover and insert the two LR14(C) alkaline batteries as shown in Diagram 4. When these batteries need replacing, the Low Battery Warning Light (B in Diagram 5) will flash every 5 seconds. The Door Chime can be free standing or wall mounted using the wall bracket provided. If wall mounting is preferred, screw the bracket to the wall, Diagram 6. The Door Chime hooks onto the wall bracket as illustrated. There is an external adapter socket (C in Diagram 5) which allows you to power the Door Chime receiver from a 220-240V mains socket using the Friedland Libra plug-in mains adapter which can be purchased separately (D254).

32+ CR20 32+ CR20

Tune Selection
Your Bell Push can be set up to make the Door Chime play a choice of note sequences as follows: a. A standard 2 note sequence or b. A longer 4 note sequence or c. One of three alternative 2 note sequences which offer a choice of sound tone and are particularly suited to the hard of hearing. The Tune Selector in the Bell Push (D in Diagram 7) is factory set to position 1 making the Door Chime play the standard 2 note sequence. If you would prefer the 4 note sequence just move Tune Selector to position 2. If you require one of the alternative 2 note sequences to be played this can be easily done as follows: 1. Ensure that the Tune Select Control (D in Diagram 7) on the Bell Push is set to position 2. 2. Set Control E in Diagram 8 on the Door Chime to position 1. 3. Each time you press the Bell Push, the door chime will play the 4 note sequence and the three alternative 2 note sequences in rotation. Continue to press the Bell Push until you hear the note sequence you require. 4. Set Control E in Diagram 8 to position 2 to lock the Door Chime into playing your chosen note sequence. In the case of battery failure, the alternative tone two note sequences will default to the 4 note setting. These can be reset using the procedure above. Your can change the note sequence at any time by using the procedure above.

Volume Control

The Volume Control (F in Diagram 5) enables you to adjust the volume of your Door Chime at any time or turn it off completely so that only the light (G) flashes when the Bell Push is pressed. The settings are: 2. High volume with flashing light 1. Low volume with flashing light 0. Mute sound with flashing light
System Codes - VITAL INFORMATION
Your Libra Wirefree Bell Push and Door Chime use a coding system to ensure there is no interference to or from a neighbouring Friedland wirefree product. Your Bell Push and Door Chime need to have identical codes so that they can recognise each other. In the unlikely event that your Door Chime rings without your Bell Push being used, it means another Friedland wirefree product, either your own or a neighbour's, is using the same code as your own. You can then change your code by following this procedure:1. Remove the front cover from the Bell Push. Using a pen tip alter one or more of the 8 switches (H in Diagram 7) to the ON position. 2. Remove the battery compartment from the Door Chime. Again using a pen tip alter the switches 1 to 8 (I in Diagram 8) to correspond exactly to the switches you have set in the up position in the Bell Push. Example: if you set switch 1 in your Bell Push to the ON position, then you must set switch 1 in your Door Chime to the ON position.

Other Libra Products

All Friedland Libra products are compatible and will activate each other if the system codes are set to be the same, as described above. For example, if you install an additional Libra Bell Push for your back door, just ensure that you adjust the system code to be the same as your other Bell Push and your Door Chime.

CR 20 + 32

Movement Activated Door Chimes
Friedland Libra chimes can also be activated by a Friedland Spectra 433 MHz PIR Movement Detector/Transmitter. All you have to do is make sure that the PIR and Door Chime have the same system code.

Trouble Shooting

Problem Chime not sounding Possible Cause Batteries may not be inserted correctly Chime may be positioned out of range of the Bell Push A metallic object may be blocking the signal from the Bell Push The battery in the Bell Push may need replacing Your Bell Push and Chime may have different system codes Your volume control may be set to the mute setting False activation of the Chime Another of your own or a neighbour's wirefree product may be using the same code Solution Check all batteries have been inserted correctly Move your Chime closer to the Bell Push Experiment with the location of your Chime to see if you can position it in a more suitable place Press the Bell Push. If Confidence Light (A) does not illuminate, replace the Bell Push battery. Check the system codes in both your Chime and Bell Push Set volume control to position 1 or 2 Change the system codes in both your Bell Push and Chime

Caradon Friedland guarantees this product for 3 years from date of purchase. This does not effect your statutory rights. If you require further information about Libra products, call the Friedland helpline on 0277 ext 888. Caradon Friedland Limited, Houldsworth Street, Stockport, Cheshire, England, SK5 6BP 452-710/1 www.friedland.co.uk

Technical Information

LIBRA COLOUR SIGNAL 1 SIGNAL 2 BATTERIES AVERAGE BATTERY LIFE**
1 Year 5 Years 18 Months 5 Years 18 Months 5 Years 18 Months 5 Years 1 Year 5 Years 5 Years Chime: 220-240V/50Hz

VOLTAGE

SOUND SOUND SOUND DISPLAY FREQUENCY FREQUENCY MODULE LEVEL dB@1m*** SIGNAL 1 SIGNAL 2

80 740/587 A

30m Entrance Chime & Bell Push 50m Chime & Bell Push 50m Chime & Bell Push 100m Chime & Bell Push* 200m Chime with Light & Bell Push* 50m Plug-in Chime & Bell Push 100m Chime & Extender* 100m Chime*

2-Note

Chime : 3 x LR14 (C) Push : 1 x CR2032 Lithium inc. 4-Note Chime : 2 x LR6 (AA) Push : 1 x CR2032 Lithium inc. Chime : 2 x LR6 (AA) Push : 1 x CR2032 Lithium inc. Chime : 2 x LR6 (AA) Push : 1 x CR2032 Lithium inc. Chime : 2 x LR14 (C) Push : 1 x CR2032 Lithium inc. Push : 1 x CR2032 Lithium inc.

740/587

740/587/ 660/440 740/587/ 660/440 740/587/ 660/440 740/587/ 660/440 740/587/ 660/440 740/587/ 660/440 740/587/ 660/440

4-Note

4-Note, plus three additional 2-notes 4-Note
Chime : 2 x LR6 (AA) Extender : 1 x 6LR61 (PP3) 2 x LR6 (AA)
18 Months 3 Years 18 Months

D260 D261 D271 D254

Bell Push Bell Push Extender Mains Adapter

Grey White White Black

1 x CR2032 Lithium inc. 1 x CR2032 Lithium inc. 1 x 6LR61 (PP3)
5 Years 5 Years 3 Years Input:220-240V AC Output:3.6V DC
ADDITIONAL INFORMATION: Operating radio frequency for all Libra products is 433MHz. Operating temperature range for all Chimes is 0C to +30C.Operating temperature range for all Pushes is -10C to +50C. All Libra products are packed in shipping containers of 4 units. * Can be powered by Mains Adapter (available separately). ** Battery life is dependent on normal usage. *** Sound levels are measured in free field conditions. Design of Friedland products may be subject to change without prior notice.
CHIMES, BELLS, BUZZERS AND KITS

SIGNAL 1

SIGNAL 2

BATTERIES

FRIEDLAND TRANSFORMER

MAX POWER VA/W

8 VA 6W 8 VA 6W 6W 6W 8 VA 6W 6W 6W 6W 6W 6W 6W 1.2 W 0.5 W 1.8 W

SOUND LEVEL dB@1m MAX.

SOUND FREQUENCY NOTE 1 Hz

740 740

SOUND FREQUENCY NOTE 2 Hz

587 587

DISPLAY MODULE
D105 D107 D108 D113 D117 D126 D209 D230 D238 DD426 D430W D454 DE821 D833E D852E D182 D422 D424 D792 D902 D973 D128
Fiesta Facet Carnival Surf Ding Dong Festival Maestro Big Ben Shield Bandera York Tube Chime Festival Chevron Warbler Quartet Harmony Chorus Minibuzzer Surf Kit Facet Kit Underdome Bell-in-One Bell Kit Hockey Chime
8V AC 6V DC/8V AC 8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 6V DC/8V AC 3V DC/8V AC 6V DC/8V AC 8V AC 6V DC/8V AC 6V DC/8V AC 8V AC 3V DC 3V DC
2-Note 2-Note 2-Note 2-Note 2-Note 2 Note 2-Note 2-Note 2-Note 2-Note 2-Note Warbling Warbling Warbling 4-Note 25 Tunes 29 Tunes Buzzer 2-Note 2-Note Bell Bell Bell 2-Note 2 x RD20/D 2 x R20/D 4 x R14/C 4 x R14/C 1 Tune 1-Note 2-Note 2-Note 2-Note 1-Note 1-Note 1-Note 1-Note 4 x R14/C 4 x R14/C 4 x R14/C 4 x R20/D 4 x R14/C 4 x R14/C 4 x R14/C 4 x R6/AA 2 x R6/AA 4 x R6/AA 4 x R14/C 4 x R14/C 4 x R14/C 4 x R14/C
753 or or or or or or or or or or or or or or or or or or or or or 770

B B B B B B B B B B A

740 660/550/440/370

587 660/550/440/370

B A A B A or B A B

753 or 780

MAINS VOLTAGE CHIMES WITH BUILT-IN TRANSFORMERS
D3126 D3230 Festival (incl. Transformer) Big Ben (incl. Transformer)

MAX. POWER VA/W

16 VA 16 VA

SOUND LEVEL dB@1m MAX

220-240V AC 50Hz 220-240V AC 50Hz

2-Note 2-Note

PUSHES
D2105 D534 D534W D611 D620 D622 D624 D630 D639 D642 D6421 D647 D660 D663 D664 D665 D667 D669 D680 D681 D723 D723W D814 D824 D1053 D1225 D1226 Fiesta Lightspot Lightspot Gem Elite Ducat Halo Luna Mesa Button Button Pear Push Rosario Florian Medallion Union Benton Legion Quadra Quadra Pushlite Pushlite Sesame Dimex Door Contact Index Index 16mm hole req. 16mm hole req. 16mm hole req. 16mm hole req. 16mm hole req. 16mm hole req. 16mm hole req. 16mm hole req 16mm hole req 16mm hole req. 110-120V AC, 2

LIGHTED

2-Note Yes Yes

SPARE LAMP

14 VA D70 D70

FINISH

1480 B (1)

TRANSFORMERS SWITCH

D743 D753 D770 D780 Transformer Transformer Transformer Transformer Transformer Transformer Transformer Transformer No No No No Yes No No No Yes No Yes No

MOUNTING PRIMARY TYPE

Surface Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface DIN/Surface 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz 220-240V 50Hz

SECONDARY DISPLAY MODULE

8V 0.5A 8V 1A 8V 0.5A 8V 1A 8V 1A 12V 1A 8V 1.5A 8V 2A 8V 2A 12V 1.5A 12V 1.5A 12V 2A B (6) B (5) B (5,6,7)
Brass Brass Yes 1114 Brass Chrome Yes 1114
B (1,2,7) B (2,7) B (1,2)

D780S D765 E3549 E3554N

E3554SN Transformer E3538N Transformer
E3538SN Transformer E3539N Brass Yes Yes Yes Yes Brass Brass Brass Brass Brass B (3) B (3,4) B (3) B (4) B (4,7) B (3,4) Transformer

WIRING CONNECTIONS

105, 107,113,117,126,128 230,238,239
BATTERY OPERATION PUSH 1 PUSH 2
For use with external battery only For use with external battery only 1+2 0+2 0+2 0+1 0+A 0+1 0+1 0+1 0+2 0+B 0+2 0+1
TRANSFORMER OPERATION TRANSFORMER PUSH 1 PUSH 2
1+3 0+3 1+3 0+3 0+1 0+3 0+3 3+4 2+3 0+1 0+2 0+1 0+2 0+2 0+1 0+A 0+1 0+1 0+2 0+B 0+2 0+1 0+1

Yes Yes Yes

D72 D70 D70 B (1,2) B (1,2) B (1,2)
430W,454 E821, 852E 833E 902 792,182
* Terminals are unmarked, Push should be wired in series with Bell and Transformer. Two incoming wires are then connected to either terminal.

SPECTRA RANGE

360 PIR Maxiflood Miniflood Superflood Spectra Lite Wirefree Kit Wirefree PIR

CATALOGUE No. AND COLOUR

6013e White 6014e Black

COVERAGE

12m 15m 15m 15m 15m 15m 8m 15m 15m

SWIVEL

TIME ON DURATION
15sec - 15min 5sec - 5min 5sec - 5min 5sec - 5min 5sec - 5min 5sec - 5min 5sec - 5min 15sec - 15min 15sec - 15min

IP RATING

IP 44 IP 54 IP 44 IP 54 IP 44 IP 44 IP 44 IP 54 IP 54

LAMP MAX. WATTAGE

MAXIMUM SWITCHING LOAD GLS HALOGEN
1000 Watts (1kW) 1000 Watts (1kW) 1000 Watts (1kW) 1000 Watts (1kW) 1000 Watts (1kW) 1000 Watts (1kW) 500 Watts (0.5kW)
6015eWhite 6016e Black 6017eWhite 6018e Black 6025eWhite 6026e Black 6035eWhite 6036e Black 6028eWhite 6027e Black 6006e White 6551e White 6550e Black 6501e White 6500e Black

500W 150W 500W 60W

1000 Watts (1kW)
1200 Watts (1.2kW) 1000 Watts (1kW)
1000 Watts (1kW) 1000 Watts (1kW)
ADDITIONAL INFORMATION: All models conform to European Low Voltage Directive 73/23/EEC and EMC Directive 89/336EEC
Useful Information Wirefree Chimes and Pushes
Please note that positioning of the Libra Wirefree Bell Push or Door Chime on or near metal structures, reinforced PVC doors or door frames may reduce the transmission range To ensure weatherproofing is maintained, always mount Bell Pushes the correct way up, as shown in the product instructions or on the packaging. Then replace the front cover securely

Useful Information Wired Chimes and Pushes
Wired-in Chimes should be mounted vertically on a wall, ideally at 2 metres high, for best sound coverage When battery-operated, wired-in Chimes and Bells can be mounted up to a maximum of 15 metres from the push, using standard Friedland bell wire When transformer operated, wired-in Chimes and Bells can be mounted up to 60 metres from the Push, using standard Friedland bell wire D902/D973 Bell In One can be mounted up to a maximum of 9 metres from the push The use of wire not intended for Door Chimes / Bells (e.g. telephone wire) may affect Chime / Bell performance Do not mount wired-in Chimes on the back of a door, as the chime bars or batteries may dislodge if the door is slammed All terminal screws should be tightened down, including those which are not being used All wired-in Chimes can operate from either batteries or a suitable transformer Additional Chimes can be wired to the original Chime, to provide better sound coverage an additional or alternative transformer may also be required Electro-mechanical Chimes and Electronic Chimes cannot be wired together Lit Pushes require the use of a transformer Lit Pushes cannot be used with Electronic Chimes, with the exception of a transformer-operated D852E Chorus An extra slave light can be wired to a Spectra PIR Product, providing the maximum load is not exceeded. Wire the slave to N + L1 terminals

Questions and Answers

LIBRA WIREFREE PROBLEM Chime not sounding POSSIBLE CAUSE Chime may not be powered SOLUTION Check all batteries have been inserted correctly or, if Chime is mains powered, check that the adapter lead is connected and / or that the mains is switched on Move the Chime closer to the Bell Push Experiment with the location of the Chime or Push, to see if it can be positioned in a more suitable place Replace the Bell Push battery Check the system codes inside both the Chime and Bell Push Check the volume /off controls on the Chime Change the system codes inside both the Bell Push and Chime to another setting
Chime may be positioned out of range of the Bell Push A metallic object or structure may be blocking the signal from the Bell Push The battery in the Bell Push may need replacing The Bell Push and Chime may have different system codes The Chime may be turned off False activation of the Chime Another Friedland wirefree product may be using the same system code
TRADITIONAL CHIMES PROBLEM Chime emits wrong signal Chime rings continually POSSIBLE CAUSE Chime may be mounted incorrectly Possible short circuit Water on Push contacts Closed Push contacts Chime not working Loose screws Failed power source SOLUTION Mount chime, following instructions Check wiring against instructions Check contacts for moisture Push may be mounted wrong way up, allowing rain to enter Adjust Push contacts Tighten all terminals screws Check power source battery or transformer Check wiring continuity

SPECTRA PROBLEM Light stays on permanently Light stays on permanently at night POSSIBLE CAUSE Wired incorrectly PIR may be suffering from false activation SOLUTION Mains supply may be connected to the output (L1) terminal by mistake Cover Detectors lens completely with a thick cloth or masking tape, to stop it from seeing anything. If the Detector now lets the light switch off after the set time and does not light again, this indicates that it has been picking up movement within its range. Need to adjust position / angle of the PIR. See above Mount Detector in a different location Try masking the bottom half of the lens, to stop Detector picking up low-level objects Tilt / swivel Detector head, to adjust position Adjust Lux control slowly clockwise, until lamp illuminates Climate can cause the PIR to be 30% more sensitive in winter than in summer Seasonal adjustment of the Lux control can help Make sure not to handle the bulb with your fingers, when installing it Fingertip grease can cause the bulb to blow Alter the mounting position so it picks up across, rather than head on Check that earth or neutral is not connected to the L1 terminal
Light activates for no obvious reason, at random
False activation Wind may be activating the Detector Small animals and pets may be activating Detector Wrong position of Detector head Ambient light level too high Climate changes
Detector is picking up movement from outside area wanted to be covered PIR Detector will not operate at night PIR detection range varies, day to day
Halogen floodlight keeps on blowing the bulb Coverage from PIR is poor Fuse blows when switching the power on
Grease on the bulb Mounting position Wiring