Reviews & Opinions
Independent and trusted. Read before buy Fujifilm Finepix S304!

Fujifilm Finepix S304

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Fujifilm Finepix S304 Digital Camera, size: 5.4 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Fujifilm Finepix S304About Fujifilm Finepix S304
Here you can find all about Fujifilm Finepix S304 like manual and other informations. For example: drivers.

Fujifilm Finepix S304 manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Fujifilm Finepix S304 please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Fujifilm Finepix S304 photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

Comments to date: 14. Page 1 of 1. Average Rating:
riddler_oo 7:00am on Monday, November 1st, 2010 
Excellent image resolution, sharpness, and color. Great 6x zoom lens with F2.8 at tele end. Very good battery life.
kialiecoyote 4:09pm on Monday, September 20th, 2010 
Great zoom, nice pictures. Big for a woman, bad LCD, SLOW, sensitive to movement. Great price, excellent zoom, excellent picture quality, good evf/lcd, ease of use small memory card, no usb cable, poor af in subdued light. updated with new model I found at store.
gmmclean 9:59am on Friday, September 10th, 2010 
Great 6X optical zoom Poor lens cap, difficult to use in gloomy conditions Easy to use Bigger than Average, Some Blurring I found the S304 to be simple to use and was astonished with the great picture results, even in print. Picture quality, low price.
cje 5:22pm on Tuesday, September 7th, 2010 
Looks better than it is I have owned this camera for a few years now and find it can be extremely frustrating.
kingsmead 7:20pm on Sunday, September 5th, 2010 
I have taken thousands of images with this camera. The lens is great, producing very low distortion, and providing a fantastic zoom range.
Moser1986 6:11pm on Saturday, August 28th, 2010 
fujifinepix3800 This camera needs to be recalled as it just stopped working. I liked it originally, but would not buy a Fuji product now. Clunky, but nice pictures Ok, bought this camera about 5 years ago. It still is alive through all the beatings we have given it. For the price its a good camera if you plan on shooting outdoors.
dornoy 1:42am on Sunday, August 1st, 2010 
The disclaimer At the outset, let me say that I am not an am/pro photographer, nor am I involved in the industry in any way.
misdial69 7:09pm on Monday, July 26th, 2010 
After approximately 2 years of light use, a s...  Good zoom and a good camera, when it worked Poor design/ workmanship
spans 11:02pm on Wednesday, June 2nd, 2010 
excellent pic, zoom, interchangible lense etc. The Camera has a short 3 and half yr life optical zoom, manual features, Audio input low light focus.
alexraasch 12:43am on Saturday, May 22nd, 2010 
Enhances the capabilities of my Fuji FinePix S5000 by allowing me to get shots of whole rooms instead of just areas of rooms.
jamesFonda 5:34am on Friday, April 16th, 2010 
Excellent image quality. Have 2 newer cameras and keep going back to this one. Wish it had a wider lens. Terrible battery life Well done Fuji, after having this camera for 3yrs, I thought it was time for an upgrade. I bought the much acclaim Sony H2 about a week ago.
chencs 7:14pm on Thursday, April 1st, 2010 
Fuji S304 I have owned one of these cameras for two years and have been delighted with its capabilities.
wmchellis 7:45am on Tuesday, March 23rd, 2010 
This camera takes great scenery shots, but when indoors I always use the flash regardless. This camera takes great scenery shots, but wh...  Great outdoor shots Low light and high speed shots can be blurry I think this is a great camera. I do not plan on using it for anything spectacular. I just enjoy taking pictures of my pets.
OOSCARR 9:04pm on Friday, March 19th, 2010 
The past. i decided on the fujifilm finepix 3800 after doing a hard core search for a small digicam. i also looked at similar nikons, cannons, kodaks. This camera takes some getting used to....but once you get the settings and options down it takes fantastic pictures.

Comments posted on www.ps2netdrivers.net are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.

 

Documents

doc0

Max. Zoom Scale

1.28 1.6 3.2

Equivalent to approx. 228 mm-291 mm Equivalent to approx. 228 mm-364 mm Equivalent to approx. 228 mm-729 mm
The position of the I on the zoom bar indicates the current zoom setting. hIf the I is above the dividing line, the digital zoom is being used. If it is below the line, the optical zoom is being used. hPress a or b to move the I up and down. hWhen you switch between digital zoom and optical zoom, the I stops moving briefly. Press the button for the same direction again to start the I moving and switch the zoom setting.
To change the flash setting, pop the flash unit up. The flash mode setting does not change when you close the flash. hEffective flash range (in R mode) Wide-angle: Approx. 0.3 m to 3.5 m (1 ft. to 11.5 ft.) Telephoto : Approx. 0.8 m to 3.5 m (2.6 ft. to 11.5 ft.)

! G See

P.51 for information on changing the quality setting.
the image goes out of focus when you use the zoom, press the shutter button down halfway to refocus. ! G The optical zoom is equivalent to approximately 38 mm-228 mm on a 35 mm camera.
the photography mode is R , use the Auto Flash mode. ! G When you pop the flash up, the image shown on the screen may disappear and the screen may go dark because the flash is charging. In this event, the indicator lamp blinks orange. ! G If you use the flash in very dusty environments or when it is snowing, the flash may reflect off snowflakes or floating dust particles so that they appear as glowing white dots on your image.
Press the I Flash button (c) to select the flash mode to be used.
! G The flash charging time may increase if the charge
remaining in the battery is low.

I FLASH

c Auto Flash Mode
Use this mode for ordinary photography. The flash fires automatically as required by the shooting conditions.

n Red-Eye Reduction

Use this mode to ensure that the subjects eyes appear natural when photographing people in low-light conditions. The flash fires a pre-flash just before the picture is taken and then fires again to take the actual picture.

z Forced Flash

Use this flash mode to photograph backlit scenes, such as a subject against a window or in the shade of a tree, or to obtain the correct colors when you are shooting under lighting such as fluorescent tubes. In this mode, the flash fires in bright as well as dark conditions.

v Slow Synchro

This is a flash mode that uses a slow shutter speed. This allows you to take pictures of people at night that clearly show both your subjects and the night-time backdrop.
? Red-Eye Reduction + Slow Synchro
Use this mode for slow synchro shots with redeye reduction.

N Red-Eye Effect N

When you use the flash to photograph people in low-light conditions, their eyes sometimes appear red in the picture. This is caused by the light of the flash reflecting off the inside of the eye. Use Red-Eye Reduction flash to effectively minimize the likelihood of the red-eye effect. Take the following measures also to make Red-Eye Reduction more effective:
! G The image may be overexposed when you shoot bright scenes. ! G Because a slow shutter speed is used, a tripod
should be used to prevent camera shake.
h Get the subjects to look at the camera.
h Get as close as possible to the subjects.
To take a picture of a main subject at night with the background brightly lit, please use the E mode / (Night Scene) settings (P.45).
N When you cannot change the
h Check that the flash is popped up.
e MACRO (CLOSE-UP) PHOTOGRAPHY

flash settings N

Selecting Macro mode allows you to take closeup shots.

G Effective

Photography Range: Approx. 10 cm to 80 cm (3.9 in. to 2.6 ft.)
! G Macro photography is automatically cancelled in the

Suppressed Flash

Pressing the flash down switches the camera to Suppressed Flash mode. Use this mode for photography using indoor lighting, for shots taken through glass, and for photography in venues such as theaters or at indoor sporting events where the distance is too great for the flash to be effective. When you use Suppressed Flash, the Auto White Balance function (P.130) operates so that natural colors are captured along with the ambience of the available light.
h When , (Landscape) or t (Continuous Shooting) is selected in E (Scene Position) mode, the flash mode is set to Suppressed Flash even when the flash is popped up.
following situations: When you have switched photography modes When the camera is switched off ! G When you set the mode, the e icon is briefly displayed larger. ! G If you are shooting in a dark location (when the \ camera shake warning icon is displayed), use a tripod to prevent camera shake.
N When you are using the flash N
When you use the flash in Macro mode, remove the lens adapter ring. If the adapter ring is not removed, a shadow may appear in the bottom center of your shot. h Effective shooting range: Approx. 30 to 80 cm (1 ft. to 2.6 ft.)
Press the e Macro button (d ). The e appears on the screen indicating that you can take close-up shots. To cancel Macro mode, press the e Macro button (d) again.

1 Set the Power switch to w. 2 Press the MENU/OK button to display the Menu on the screen.
! G To revert to image playback without erasing the image,
select BACK and press the MENU/OK button.
Quality Maximum Zoom Scale 3M F/N (2048 1536) 12.8 2M (1600 1200) 10.0 1M (1280 960) 8.0 0.3M (640 480) 4.0
Press a or b to select FRAME in the p ERASE menu and press the MENU/OK button. See P.61 for more information on ALL FRAMES and FORMAT.
! 40 G Playback zoom cannot be used during multi-frame playback.
! G It may not be possible to play back shots taken on other camera models.
Note that mistakenly erased images cannot be recovered. You should copy important files that you do not want to be erased to your computer or another media.
ADVANCED FEATURES PHOTOGRAPHY
The Advanced Features Photography section introduces a range of camera functions that you can access by setting the Power switch to q.
I Photography Mode Specifications
R (AUTO) c d z FLASH (c/n/z/v/?) e MACRO (ON/OFF) y Quality (Still image: 0.3M/1M/2M/3M N/3M F) (Movie: $/#) = SELF-TIMER (ON/OFF) OK OK OK OK OK

E (SCENE

POSITION) W (MANUAL)

T (MOVIE) OK OK

OK OK OK OK OK OK OK OK OK OK

2 OK OK OK 1 OK

Pressing the MENU/OK button erases the frame (selected file) displayed. When erasing is complete, the next image appears and the message is displayed.
E SCENE POSITION (m/,/.///A)
d EV (Exposure compensation 2.1 to +1.5) a WHITE BALANCE (8/-/0/9/7/6/R) N A.PRIORITY (AUTO/F2.8/F4.8/F8.2) KSHARPNESS (HARD/NORMAL/SOFT) x FLASH (Flash brightness adjustment 0.6 to +0.6) g OPTION (SETUP/LCD BRIGHTNESS)
Press d or c to view the frame (selected file) you want to erase.

! G Press

the BACK button to cancel erasing single frame.
To erase another frame, repeat steps 3 and 4.
1 Restrictions apply to the available flash modes depending on the E Scene Position menu setting in E mode (P.45). 2 In E photography mode, you can only select the Macro setting for t mode (Continuous shooting).

q STILL IMAGE

R/W MANUAL

W Manual mode

E SCENE POSITION

R Auto mode

This is the simplest photography mode to use and is suitable for the widest range of shots.
Manual mode lets you specify a range of different menu settings for taking pictures. hMenu options only available in Manual mode Brightness (exposure compensation), white balance, aperture priority, sharpness, flash (flash brightness adjustment)
The E Scene Position setting allows you to select any of 5 modes to suit the scene you are shooting. See P.46 for details.

shots. Normally the 3M N setting provides sufficiently high quality for printing.
You can select 2 levels of quality. For better image quality, select # , and for longer photography time, select $.
The self timer can be set in the R, E and W modes. When you set the self-timer to ON, = appears on the screen. In this mode, a timer runs for roughly 10 seconds before the shutter is released. Use this mode for shots such as photographs of yourself.
i To print at A5 size 2M i To print at A6 (postcard) size 1M i To use the image as an e-mail attachment 0.3M
self timer is automatically switched off in the following situations: When shooting ends When the Mode dial setting is changed When the mode is switched between photography and playback When the camera is switched off ! G You can also use the AF/AE lock (P.29). ! G Be careful not to stand in front of the camera when you press the shutter button as this can cause focusing or exposure metering errors.
1 Position the AF frame over your subject. 2 Press the shutter button down half way to set the focus. 3 Without releasing the shutter button, press it down fully. The self-timer then starts running.

= SELF-TIMER PHOTOGRAPHY

d EV (EXPOSURE COMPENSATION) Displaying the menus (P.50)
N Subjects for Which Exposure
Adjustment is Particularly Effective N
Guide to using + (positive) compensation
hCopying of printed text (black characters on white paper) (+1.5 EV) h Backlit portraits (+0.6 EV to +1.5 EV) hLocations with very bright backgrounds or strong reflections, such as ski resorts: (+0.9 EV) hShots made up predominantly of sky. (+0.9 EV)
The self timer lamp lights for 5 seconds and then starts blinking. 5 seconds later the camera makes a clicking noise and takes the picture.
Until the picture is taken, a countdown appears on the screen. Self-timer mode is automatically cancelled after each shot.
This mode can be selected in the W photography mode. Use the Exposure compensation setting to obtain the optimum image brightness (exposure) when the subject is much brighter or darker than the background. hCorrection range: 2.1 EV to + 1.5 EV (13 steps: 0.3 EV increments) See P.130 for more information on EV.

N Playing back movie files N

Format

Erases all the files. Because formatting also erases protected files, check carefully before formatting a card and copy any files that you want to keep onto another media, such as your hard disk.

All frames

Erases all unprotected files. You should copy important files that you do not want to be erased to your computer or another media.
Pressing the MENU/OK button erases all the unprotected files.
1Use a or b to select FRAME, ALL FRAMES or FORMAT. 2Press MENU/OK button to confirm your selection.
Erase only the selected file.
Returns to playback without erasing any files.
1Use d and c to select the file to be erased. 2Press the MENU/OK button to erase the currently displayed file. To erase another image, repeat steps 1 and 2. When you have finished erasing images, press the BACK button.
! G The file for which was displayed
cannot be erased. Remove the protection.
If the message appears, press the MENU/OK button once more to erase the image.
PROTECTING IMAGES FRAME/ALL
Use d or c to select k PROTECT. Pressing the MENU/OK button erases all the files and initializes the xD-Picture Card. Formatting erases protected files also.

! G If the , , or

message appears, refer to P.122, 123 before formatting the xD-Picture Card and take the appropriate measures.
Protection is a setting that prevents images from being accidentally erased. However, FORMAT erases all images, regardless of a PROTECT ALL setting (P.64).

Unprotect all

Removes the protection from all the files.

Frame set / Reset

Protect all

Protects all the files.

Frame set/Reset
Protects or unprotects only the selected file.
To remove the protection, press the MENU/OK button again.
1Press a or b to select UNPROTECT ALL, PROTECT ALL or FRAME SET/RESET. 2Press MENU/OK button to confirm your selection.
1 Press d or c to select the file to be protected. 2 Press the MENU/OK button to protect the file currently displayed. To protect another file, repeat steps 1 and 2. To finish protecting files, press the BACK button.
i HOW TO SPECIFY PRINT OPTIONS (DPOF)
DPOF stands for Digital Print Order Format and refers to a format that is used for recording printing specifications for images shot using a digital camera on media such as xD-Picture Card. The recorded specifications include information on which frames are to be printed. This section gives a detailed description of how to order your prints with the FinePix S304. On the FinePix S304, you can specify only one print per image in the DPOF settings. Note that some printers do not support date and time imprinting or specification of the number of prints. Note that the warnings shown below may be displayed while you are specifying the prints.

Face the microphone as you record the voice memo. Hold the camera roughly 20 cm (7.9 in.) away for the best results.
During recording, the remaining time is shown on the screen and the self-timer lamp blinks. When the time remaining reaches 5 seconds, the self-timer lamp starts blinking quickly.

Microphone

! G You
can also add voice memos to images (still images) shot on other cameras, provided they can be played back on this camera. ! G Voice memos cannot be added to movies.
end your comment during recording, press the MENU/OK button.
N When the image already has

a voice memo N

PLAYING BACK VOICE MEMOS
If you select an image that already has a voice memo, a screen appears in which you can select whether or not to rerecord the caption.
1Set the Power switch to Q. 2Use d or c to select an image file that has a voice memo. 1 Press b to play the voice memo. 2 The screen shows the playback time and a playback progress bar.
When you have recorded 30 seconds of comment, the message appears on the screen. To finish: Press the MENU/OK button. To re-record your comment: Press the BACK button.
cannot play back voice memos using multiframe playback. Use the DISP button to revert to normal playback.

The r icon is displayed.

(P.79).

the volume

Control Description The voice memo automatically stops when playback ends.
g LCD BRIGHTNESS/VOLUME 2
I Playing back voice memos
Pauses the voice memo during playback. Press this button again to resume playback. Stops playback. Press d or c while voice memo playback is stopped to go back to the previous file or advance to the next file respectively. Press these during playback to skip forwards or backwards through the voice memo. These buttons do not function while playback is paused.
1Use d and c to adjust the screen brightness or speaker volume. 2Press the MENU/OK button to confirm the new setting.
When you select the BRIGHTNESS or VOLUME menu option, an adjustment bar appears on the LCD monitor or viewfinder (EVF).
! G To exit this procedure without changing the settings,

press the BACK button.

g USING SETUP 1

I List of settings

q Still Image mode

BRIGHTNESS (P.79) SETUP

T Movie mode

w Playback mode

VOLUME (P.79) BRIGHTNESS (P.79) SETUP

Still Photography Screen

I SETUP Menu Options (Date/time setting, etc.)

Settings Display

Factory default

Explanation

This option specifies whether or not an image checking screen (photography results) is displayed after you take a shot. The photography results are displayed for about 2 seconds and then automatically recorded. In continuous shooting, the photography results are displayed for a set time before being automatically recorded even if this option is set to OFF. This function temporarily switches the screen off if the camera is not used for approximately 30 seconds. See P.82 for details. See P.96 for details. Use this option to correct the date or time. See P.20 for details. This option allows you to set the volume of the beep emitted when the camera controls are used.

POSTVIEW

ON/OFF ON

POWER SAVE

ON/OFF DSC/PC CAM SET LOW/HIGH/OFF

OFF DSC LOW

You can use SETUP in any mode. 1Press the MENU/OK button to display the menu screen. 2Press d or c to select g OPTION and then press a or b to select SETUP. 3Press the MENU/OK button.
1Press a or b to select a menu option and then press d or c to change the setting. 2Press the MENU/OK button.
USB MODE DATE/TIME SOUND LANGUAGE
ENGLISH/FRANCAIS/ ENGLISH Select English, French or German as the language used for screen display. DEUTSCH Except for the DATE/TIME and LANGUAGE settings, this function resets all the camera settings (including the photography and playback menu settings) to the factory default values set at shipment. When you press c, a confirmation screen appears. To proceed, press the MENU/OK button again.

RESET ALL

! G Press c for DATE/TIME or RESET ALL.
6.1 The Software Components

USB Mass Storage Driver

Allows a digital camera to be used as USB Mass Storage (removable disk drive, card reader).

FinePixViewer

Allows you to display thumbnail lists of the images stored on your PC or in the camera, print the images individually or as an index, display the images at full size and perform some basic image processing.
hPower saving OFF (default setting) The camera does not use measures such as sleep to reduce power consumption. However, if the camera is not used for approximately 2 minutes, this function automatically switches the camera off. hPower saving ON Power consumption is kept to a minimum to prevent battery depletion. i If the camera is not used for approximately 30 seconds, the screen switches off temporarily to reduce power consumption (Sleep mode). i Once the camera is in Sleep mode, if it is left unused for a further 90 seconds, it is automatically switched off. i The charging time for the flash increases slightly because the flash charging power is 82 reduced.

If the Connection speed window appears, set the correct speed for your environment of connection and then click the [Next] button. If you do not know your connection speed, simply click the [Next] button.
12. After you restart your PC, install DirectX as directed by the on-screen instructions and then restart your PC again. If the latest version of DirectX is already installed on your PC, this installation is not performed. 13. After you restart your PC, the FinePixViewer installation completed message appears. Click Using FinePixViewer to view the basic FinePixViewer functions.
15. Proceed with the installation as directed by the on-screen instructions.
6.3 Installation on a Mac OS 8.6 to 9.2
6.3.1 Check the system software settings

I Enable File Exchange

Check whether File Exchange is active. To use an xD-Picture Card that is supported by the camera, the File Exchange utility supplied with Mac OS must be running.
2. Double-click Installer for MacOS8.6-9.x to launch the Installer. 3. The Installer setup screen appears. Click the [Installing FinePixViewer] button.
I To install Acrobat Reader later.
1. Open the My Computer window, right-click the CD-ROM icon and select Open to view the contents of the CD-ROM.
1. Switch on your Macintosh and start up Mac OS 8.6 to 9.2.
NOTE Do not connect the camera to your Macintosh until the software installation is completed.
2. Double-click ACROREAD ENGLISH folder. 3. Double-click ar505enu.exe. 4. Proceed with the installation as directed by the on-screen instructions.
2. Select the Extension Manager in the Control Panel and check that the File Exchange check box is ticked. If not, click in the box so that an appears and then restart your Macintosh.
14. To install Acrobat Reader, click Install Acrobat Reader.
You should install Adobe Systems Acrobat Reader software to read the FinePixViewer Users Guide (PDF). If you already have the latest version installed, this step is not required.
6.3.2 From FinePixViewer installation to restart
1. When you load the enclosed CD-ROM into the CD-ROM drive, the FinePix window automatically opens.
NOTE If the FinePix window does not open automatically, double-click the CD-ROM icon.
4. A confirmation message appears asking whether you want to continue with the installation. Click the [OK] button.
5. The User License Agreement for this software is displayed. Read the agreement carefully and then, if you agree to the terms of the Agreement, click the [Yes] button. If you click the [No] button, the 89 software is not installed.
6. Select the installation destination for FinePixViewer and ImageMixer VCD for FinePix.

1. Double-click the FinePixViewer icon in the installed folder. 2. Click the [Users Registration] button. The Operation Selection dialog box appears.
1 Enter the name of your choice (nickname, etc.). 2 Enter a password of your choice using letters and/or numbers. Then enter the password again for confirmation. 3 Enter your name. 4 Enter your E-mail address. 5 Enter the remaining required information. After you register, a confirmation E-mail message is sent to you. Be sure to enter a valid E-mail address at which you can receive the message. The actual user registration page may differ slightly in appearance from the sample shown here.
4. The Users Registration dialog box opens. Select the country or area where you are living and click the [OK] button.
The actual user registration page may differ slightly in appearance from the sample shown here. If the country or area where you are living does not appear in the pull-down list, select OTHERS. <Users Registration button>
5. When the browser starts up, proceed as directed by the on-screen instructions. 6. Enter the required information in the user registration page.
7. When you have entered all the required information, click the [Register] button at the bottom of the page.
6. When you have entered all the required information, click the [Registration] button 108 at the bottom of the page.
Once you complete the registration, a confirmation E-mail is sent. Wait a few moments until the message is sent. 109
8.5 Mastering FinePixViewer
For more information on FinePixViewer functions not fully explained in this manual, refer to How to Use FinePixViewer in the Help menu for details.
8.6 Uninstalling the Software
Only perform this operation when you no longer require the installed software or when the software was not installed correctly.

Bookmarks

I To read How to Use FinePixViewer.
You must install Adobe Systems Acrobat Reader. See P.91 for information on installing Acrobat Reader.
Windows 1. Switch on your PC.
<To remove FinePixViewer>
2. Disconnect the camera (P.102, 103). 3. Quit all currently running applications. 4. Close all files. 5. Open the My Computer window, open the Control Panel, and double-click Add/Remove Programs.
<To remove the driver software>
I What is explained in How to Use FinePixViewer.
How to Use FinePixViewer covers a range of topics, including batch processing and ordering prints.
3. The Viewing Slide Shows information is displayed. Press the key to view the previous page or the key to view the next page.
7. When the confirmation message appears, click the [OK] button. Check your selection carefully since the process cannot be cancelled once you click [OK].

I Example: Looking up slide shows
1. Click How to Use FinePixViewer in the FinePixViewer Help menu. 2. Search for relevant articles by clicking the corresponding items in the Help Bookmarks or Contents. Here, click Viewing Slide Shows.
For more information on using Acrobat Reader, refer to the Acrobat Reader Help menu.
6. The Add/Remove Programs Properties window appears. Select the software to be uninstalled (FinePixViewer or the driver) and then click the [Add/Remove] button.
8. Automatic uninstallation begins. When uninstallation ends, click the [OK] button.
NOTE Only perform this operation when you no longer require the installed software or when the software was not installed correctly.
FinePixViewer folder to the Trash. Then click Empty Trash in the Special menu. Mac OS X

System Expansion Options

e By using the FinePix S304 together with other optional FUJIFILM products, your system can be expanded to fill a wide range of uses.
FinePix S304 Digital Camera
xD-Picture Card (USB) TV monitor (commercially available) Image Memory Card Reader (USB )
I Uninstalling FinePixViewer
Quit FinePixViewer and DP Editor. Then drag the installed FinePixViewer folder to the Trash and select Empty Trash in the Special menu.

Mac OS 8.6-9.2

I Uninstalling Mass Storage Driver and PC Camera Driver
1. Check that the camera is not connected to your Macintosh. 2. Drag all the files that begin with USB04CB. to the Trash. 3. Restart your Macintosh. 4. Select Empty Trash in the Special menu.

(PC card slot )

I Uninstalling Exif Launcher, FinePixViewer and DP Editor
1. After you have quit Exif Launcher in Exif Launcher Settings in the FinePixViewer Settings menu, move the Exif Launcher file from the Startup Items folder in the System folder to the Trash. Then select Empty Trash in the Special menu.

PC Card Adapter

Personal Computer (commercially available) Digital Photo Printer CX-400 (USB )
2. After you have exited FinePixViewer and DP Editor and then drag the installed

Accessories Guide

e The optional accessories (sold separately) can make taking pictures with the FinePix S304 even easier. For information on how to attach and use the accessories, refer to the instructions provided with the accessory used. Visit the FUJIFILM web site for the latest information on camera accessories. http://home.fujifilm.com/products/digital/index.html

SC-FX304

This is a special case made of polyester that protects the camera against soiling, dust and minor impacts when it is being carried.

h xD-Picture Card

These are separately available xD-Picture Card cards. Use the following xD-Picture Card: DPC-16 (16MB)/DPC-32 (32MB)/DPC-64 (64MB)/DPC-128 (128MB)
h DPC-R1 Image Memory Card Reader
The DPC-R1 provides a quick and easy way to transfer images back and forth between your PC and an image memory card (xD-Picture Card and SmartMedia). The DPC-R1 uses the USB interface for high-speed file transfer. i Compatible with Windows 98/98 SE, Windows Me, Windows 2000 Professional, Windows XP or iMac, Mac OS 8.6 to 9.2, Mac OS X (10.1.2 to 10.1.5) and models that support USB as standard. i Compatible with SmartMedia of 3.3V, 4MB to 128MB.
G AC Power Adapter AC-5VH/AC-5VHS
Use the AC-5VH/AC-5VHS when taking pictures for a long period of time or when the FinePix S304 is connected to your PC. The shape of the AC power adapter, the plug and socket outlet depend on the country.

h DPC-AD PC Card Adapter

The PC Card Adapter allows the xD-Picture Card and SmartMedia to be used as a PC Card Standard ATA-compliant (PCMCIA 2.1) PC card (Type II). h Compatible with SmartMedia of 5V/3.3V, 2MB to 128MB.
G Fujifilm Rechargeable Battery 2HR-3UF (2)
The 2HR-3UF includes 2 pieces of high-capacity AA-size Nickel-Metal Hydride (Ni-MH) batteries.
Fujifilm Battery charger with Battery BK-NH (with Euro type or UK type plug)
The BK-NH includes the quick battery charger BCH-NH and 2 Ni-MH batteries. The BCH-NH can charge 2 Ni-MH batteries in approximately 120 minutes. Up to 4 Ni-MH batteries can be charged simultaneously.
Notes on Using Your Camera Correctly
eBe sure to read this information in conjunction with Safety Notes (P.131), to ensure that you use
Notes on the Power Supply

Applicable Batteries

h AA-size alkaline, Ni-MH (nickel-metal hydride) can be used with this camera. Do not use AA-size manganese, lithium batteries in your FinePix S304 because the heat generated by the batteries could damage the camera or cause malfunctions. h The operating lives of alkaline batteries vary between brands and the life of batteries you purchase may be shorter than the alkaline batteries provided with the camera. h Do not use the batteries that are leaking, deformed, discolored or exhibit any other obvious abnormality. h Do not store the batteries in very warm or moist locations. h Keep the batteries out of reach of infant and young children. h When loading the batteries into the camera, ensure that the battery polarity (> and < ) is as indicated on the camera. h Do not use new batteries together with used batteries. In the case of rechargeable batteries, do not use charged and discharged batteries together. Do not use batteries of different types or brands together. h If you do not intend to use the camera for a long period of time, remove the batteries from the camera. (Note that if the camera is left with the batteries removed, the time and date settings are cleared.) h The batteries may feel warm immediately after being used. Before removing the batteries, switch the camera off and wait until the batteries cool down. h When replacing the batteries, always fit 4 new batteries. Here, new batteries refers to either recently purchased unused alkaline batteries, or Ni-MH (nickel-metal hydride) batteries that have recently been fully recharged together. h In cold locations (at temperatures of +10C/+50F or below), battery performance deteriorates and the time for which they can be used shortens markedly. This is particularly true of alkaline batteries. In cold conditions, put the batteries in your pocket or a similar place to warm them before loading them into the camera. If you use a body warmer to warm the batteries, ensure that they are not in direct contact with the warmer.

(Lit red) (Blinking red)

e The table below lists the warnings that are displayed on the screen

Remedy

The batteries in the camera are fully depleted or Replace the batteries or have new batteries ready. very low on charge. There is a strong likelihood of camera shake Use flash photography. However, a tripod because the shutter speed is slow. should be used for some scenes and modes. Outside the AE continuous range. The AF (auto focus) cannot work effectively. The shot can be taken, but the exposure will not be correct. i If the image is too dark, take the picture at a distance of around 2 m (6.6 ft.) from the subject. i Use AF lock to take the picture. Insert an xD-Picture Card in the correct direction. i Format the xD-Picture Card. i Wipe the contact area on the xD-Picture Card with a soft dry cloth. It may be necessary to format the xD-Picture Card. If the error message is still displayed, replace the xD-Picture Card. i Contact your FUJIFILM dealer. i Wipe the contact area on the xD-Picture Card with a soft dry cloth. It may be necessary to format the xD-Picture Card. If the error message is still displayed, replace the xD-Picture Card. i Contact your FUJIFILM dealer. Erase some images or use an xD-Picture Card that has ample free space.
i The file played back was not recorded correctly. i Images cannot be played back. i The xD-Picture Card contact area (gold- i Wipe the contact area on the xD-Picture Card with a soft dry cloth. It may be necessary to colored area) is soiled. format the xD-Picture Card. If the error message is still displayed, replace the xDPicture Card. i Contact your FUJIFILM dealer. i Camera fault. i You attempted to play a movie that was not i Movies cannot be played back. recorded on this camera. The frame number has reached 9999999. Take the shot using a formatted xD-Picture Card.
No xD-Picture Card is loaded. i The xD-Picture Card is not formatted. i The xD-Picture Card contact area is soiled.
i The data could not be recorded due to an xD- i Re-insert the xD-Picture Card or switch the camera off and then on again. Picture Card error or a connection error between the xD-Picture Card and camera. i The photographed image cannot be recorded i Use a new xD-Picture Card. as it is too large to fit in the available space on the xD-Picture Card. i The voice memo file is faulty. i Camera fault. A protected file was encountered. i The voice memo cannot be played back. i Contact your FUJIFILM dealer. Protected files cannot be erased. Remove the protection.

h Conditions for use Temperature: 0C to +40C (+32F to +104F); 80% humidity or less (no condensation) h Camera dimensions (W/H/D) 99.7 mm 77.3 mm 69.3 mm/3.9 in. 3.0 in. 2.7 in. (not including accessories and attachments) h Camera mass (weight): Approx. 295 g/10.4 oz. (not including accessories, batteries or xD-Picture Card) h Weight for photography: Approx. 437 g/15.4 oz. (including batteries, xD-Picture Card, lens cap and strap) h Accessories: See P.7 h Optional Accessories: See P.114, 115
Approx. 300 frames Approx. 320 frames Approx. 320 frames Approx. 350 frames
With fully charged battery
This indicates the number of available frames shot consecutively at room temperature with a flash use rate of 50%. Note that these figures may vary depending on the ambient temperature and the amount of charge in the battery. The number of available shots or available shooting time will be lower in cold conditions.
These specifications are subject to change without notice. FUJIFILM shall not be held liable for damages resulting from errors in this Owners Manual. The LCD monitor on your digital camera is manufactured using advanced high-precision technology. Even so, small bright points and anomalous colors (particularly around text) may appear on the monitor and viewfinder. These are normal display characteristics and do not indicate a fault with the monitor. This phenomenon will not appear on the recorded image. The operation error may be caused in a digital camera by the strong radio interference (i. e. electric fields, static electricity, line noise, etc.). Due to the nature of the lens, the edges of photographed images may appear distorted. This is normal and does not indicate a fault.

Explanation of Terms

DPOF: Digital Print Order Format DPOF is a format used for recording information on a storage media (image memory card, etc.) that allows you to specify which of the frames shot using a digital camera are printed and how many prints are made of each image. EV: A number that denotes exposure. The EV is determined by the brightness of the subject and sensitivity (speed) of the film or CCD. The number is larger for bright subjects and smaller for dark subjects. As the brightness of the subject changes, a digital camera maintains the amount of light hitting the CCD at a constant level by adjusting the aperture and shutter speed. When the amount of light striking the CCD doubles, the EV increases by 1. Likewise, when the light is halved, the EV decreases by 1. JPEG: Joint Photographics Experts Group A file format used for compressing and saving color images. The compression ratio can be selected, but the higher the compression ratio, the poorer the quality of the expanded image. Motion JPEG: A type of AVI (Audio Video Interleave) file format that handles images and sound as a single file. Images in the file are recorded in JPEG format. Motion JPEG can be played back by QuickTime 3.0 or later. PC Card: A generic term for cards that meet the PC Card Standard. PC Card Standard: A standard for PC cards determined by the PCMCIA. PCMCIA: Personal Computer Memory Card International Association (US). White Balance: Whatever the kind of the light, the human eye adapts to it so that a white object still looks white. On the other hand, devices such as digital cameras see a white subject as white by first adjusting the color balance to suit the color of the ambient light around the subject. This adjustment is called matching the white balance. A 130 function that automatically matches the white balance is called an Automatic White Balance function.

 

Tags

DCR-SR90E Seiko 5M42 NW-S616F Lingo CV450 100 SE Drive 3211-tlxb 85960 PM-870C C3000B VN-180 SC-HT330 NV-MX500B CKA7740N LE40A456c2D 5700I DN-V310 Digimaxs500 FJ1200S TME-M750 System 2 0 Tigra VH40-70 Avant Pampera 450 GM-X552 2925 GC 125 S Iden I710 Roland VA-7 Drivers GR-D275 711MP VX724 GT-S8530 ZWD14581W1 Audi Plus Thinkpad 1400 F200 EXR LS1902T Abit BG7 RCU410MSL S-301 Sjmd150 Mf250-MF350 Travelmate-2100 CCD-TR3100E 37P55E DV-686A-S TE-8000F UT41110 CT1500 ZX6000 Uk Ekhbx016AB 50 Line SGH-E215L Powershot E1 KH5001 LHT764 SP-808 RX-V357 T 1830 KV-29DR1 D6 M6 Dmcgh1K Compact G3 ME-6B Speakeasy 5 BCS-FS505 NBG4115 50VS69A Valve Miniphone HI-406BT Deere 6020 Iaudio X5 Hao15SIP 2020D ITD 62 CP30DW DE Luxe MCB30 MTR102 ES100 Camileo P10 YBA-10 EN6200 A7A266 Passeggino S3 F152 156 KX-TSC10FXW TI314BS1 DNX9140 ECM-CS10 MHC-RG33 SE-U33GX Officejet K80 DMP63ZY

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101