Reviews & Opinions
Independent and trusted. Read before buy Fujitsu Siemens Amilo PRO V!

Fujitsu Siemens Amilo PRO V Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page  Manual - 2 page  Manual - 3 page 

Download (English)
Fujitsu Siemens Amilo PRO V - Easy Guide Laptop & Notebook, size: 1.2 MB
Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.


Fujitsu Siemens Amilo PRO VENERGY+ BTP-B4K8 Fujitsu Amilo Pro V-3405 Laptop Batteries
Intelligent Battery Pack This is a 6 cell Lithium Ion rechargeable battery pack for Fujitsu Siemens Amilo Li1718, Li2727, Li2732, Li2735 and Amilo Pro V3405, V3505, V3525, V3545, V8210 and Esprimo Mobile V5505 series notebook computers. *100% more run time than 3 cell BTP-B9K8 battery* Replaces: 60.4B90T.011, 60.4B90T.021, 60.4B90T.061, 60.4P310.011, 60.4P311.001, 60.4P311.011, 60.4P311.021, 60.4P311.031, 60.4P311.041, 60.4P311.051, 60.4P50T.011, 60.4U50T. Part Number: BTP-B4K8

Brand: Energy+
Part Number: BTP-B4K8
UPC: 752570051080
[ Report abuse or wrong photo | Share your Fujitsu Siemens Amilo PRO V photo ]

Video review

Fujitsu Siemens Amilo A1667G Vs. Macbook Pro Benchmark


User reviews and opinions

Comments to date: 2. Page 1 of 1. Average Rating:
PokÚron 1:50pm on Wednesday, November 3rd, 2010 
This is my first laptop, and so i did not want to splash out £600 plus on an ultra top of the range laptop. This was recommended to me by a friend. Really good products from their Fujitsu ranges. This is a amilo pro V3515, its looks stylish and is quite compact too.
WS BeRrY 11:25am on Tuesday, June 8th, 2010 
Good Value I received this laptop as a replacement through my insurance company over 3 months ago.

Comments posted on are solely the views and opinions of the people posting them and do not necessarily reflect the views or opinions of us.




Travelling with your notebook
Please follow these guidelines when travelling with your notebook.

Before you travel

Back up important data stored on your hard disk. Switch off the radio component (Wireless LAN) for security reasons when youn cannot exclude that the transmitted radio waves can negatively affect electrical and electronic devices in your surrounding area. Switch off the radio component (Wireless LAN) for data security reasons. With data traffic via a wireless connection, it is also possible for unauthorised third parties to receive data.
Information on activating data encryption is provided in the documentation for your radio component.
If you wish to use your notebook during a flight, first check with the flight attendants if it is OK to do so. If you are travelling abroad, check that the mains adapter can be operated with the local mains voltage. If this is not the case, obtain the appropriate mains adapter for your notebook. Do not use any other voltage converter! Make sure that the rated current of the mains adapter is not higher than that of the power system to which you connect the mains adapter (see technical data of the mains adapter).
When travelling in other countries Check whether the local power supply and the specifications of the power cable are compatible. If this is not the case, buy a power cable that matches the local conditions. Do not use a connection adapter for electrical devices to connect the notebook. Enquire with the corresponding government office of the country you will be travelling in as to whether you may operate the radio component integrated in your notebook there (also see "Manufacturers notes"). If you use the modem, incompatibilities with the local telecommunications system may result. This may result in poor performance, or the modem will not work at all. You may require a country-specific telephone adapter (available as an accessory).
Transporting the notebook
Remove all disks (e.g. CD, DVD) from the drives. Switch the notebook off. Unplug the mains adapter and all external devices from the power socket. Disconnect the mains adapter cable and the data cables for all external devices. Close the LCD screen so that it locks into place. If the device needs to be shipped, use the original packaging or other suitable packaging to protect it from damage caused by mishandling. To protect against damaging jolts and bumps, use a notebook carrying case to transport your notebook. Fujitsu Siemens Computers offers a number of solutions for transporting your notebook. Current offers can be found on the Internet under Protect the notebook from severe shocks and extreme temperatures (e.g. direct sunlight in a car).

Cleaning the notebook

Switch the notebook off. Unplug the mains adapter from the mains socket. Remove the battery.
Do not clean any interior parts yourself; leave this job to a service technician. Only use cleaning products designed for computers. Normal household cleaners and polishes can damage the markings on the keyboard and the device, the paintwork or the notebook itself. Ensure that no liquid enters the notebook.
Wipe the casing with a dry cloth. If particularly dirty, use a cloth which has been moistened in mild domestic detergent and then carefully wrung out. To clean the keyboard and the touchpad, you can use disinfectant wipes. Wipe the LCD screen with a soft, moistened cloth.
Ports and operating elements
This chapter presents the individual hardware components of your notebook. You can obtain an overview of the ports and operating elements of the notebook. Please familiarise yourself with these components before you start to work with your notebook.

Opened Notebook

1= 2= 3= 4=
LCD screen Easy Launch keys and ON/OFF switch Status indicators Speaker

5= 6= 7=

Keyboard Touchpad Touchpad buttons

Back panel

USB ports Monitor port

Kensington Lock

Left side panel

1= 2= 3=

4= 5= 6=
DC socket (DC IN) (only AMILO Pro V2030) Modem port Optical drive
USB ports (only AMILO Pro V2030) Headphones port Microphone port/Line In
Right side of AMILO Pro V2030
PC card slot FireWire port

LAN port

Right side of AMILO Pro V2035

PC card slot USB ports

DC jack (DC IN) LAN port
Preparing the notebook for use !
Please take note of the information in the "Important notes" chapter.
Upon delivery, the battery can be found in the battery compartment and is not charged. Before putting the notebook into operation, the battery must be completely charged. The operating system WindowsXP and drivers required are preinstalled. Before you can use your notebook for the first time you need to install the supplied software. When not plugged into a mains outlet, the notebook runs on its built-in battery. You can increase the battery's life by enabling the system's energy saving functions. When you use your notebook in your home or office, we recommend you use the mains adapter instead of the battery. Please see the "Connecting external devices" chapter for instructions on how to connect devices such as a mouse and a printer to the notebook.

Unpacking and checking your notebook
Unpack all the individual parts. Check your notebook for damage incurred during transportation.
Should you discover damages incurred during transportation, notify your local sales outlet immediately! Do not discard the original packing material of the devices. You may need the packaging in the future if you need to transport your device.
Preparing the notebook for use

Selecting a location

Select a suitable location for the notebook before setting it up. Consider the following points when looking for a location: Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture, bed). This can block the air vents and cause overheating and damage. Do not place the notebook on your legs for a longer period of time. The underside of the notebook heats up during normal operation. Longer contac with the skin can become unpleasant or even result in burns. Place the notebook on a stable, flat, nonslippery surface. Please note that the rubber feet may mark certain types of surfaces. Keep other objects 100 mm away from the notebook and its mains adapter to ensure adequate ventilation. Never cover the fan intake or exhaust openings of the notebook or the mains adapter. Do not expose the notebook to extreme environmental conditions. Protect the notebook from dust, humidity, and heat.
Connecting the mains adapter
Please take note of the information in the section "Selecting a location". The power cable supplied conforms to the requirements of the country in which you purchased your notebook. Make sure that the power cable is approved for use in the country in which you intend to use it. The mains adapter's AC cable should only be connected to a mains socket if the notebook is connected to the mains adapter. Do not use the mains adapter for other notebooks or devices. Do not use a mains adapter that is not specially intended for this notebook. Make sure that the rated current of the mains adapter is not higher than that of the power system to which you connect the mains adapter (see technical data of the mains adapter).
As an example the image shows the AMILO Pro V2030. The position of the connections on other models may be found under Ports and operating elements.
Connect the mains adapter cable to the DC jack (DC IN) of the notebook (1). Connect the power cable to the mains adapter (2). Plug the power cable into a mains outlet (3).
Slide the release button in direction of the arrow (1) and open the LCD screen (2).
The battery charging indicator
on the notebook lights. The battery will charge.
The meaning of the various displays can be found under "Status indicators".

The keyboard has been designed to provide all the functions of an enhanced keyboard. Some enhanced keyboard functions are mapped with key combinations. The following description of keys refers to Windows. Additional functions supported by the keys are described in the relevant manuals supplied with your application programmes.

Alt Gr

Example from a German keyboard
Backspace key The Backspace key deletes the character to the left of the cursor. Tab key The Tab key moves the cursor to the next tab stop. Enter key (return) The enter key terminates a command line. The command you have entered is executed when you press this key.

Caps Lock

Caps Lock key The Caps Lock key activates uppercase mode (Caps Lock indicator lit). The Caps Lock function causes all the characters you type to appear in uppercase. In the case of overlay keys, the character printed on the upper left of the key appears when that key is pressed. To cancel the Caps Lock function, simply press the Caps Lock key again.
Shift key The Shift key causes uppercase characters to appear. In the case of overlay keys, the character printed on the upper left of the key appears when that key is pressed.
Alt Gr key The Alt Gr key allows one to type the characters printed on the lower right of the keycaps (e.g. { in the case of the 7 key on the German keyboard). Fn key The Fn key enables the special functions indicated on overlay keys (see "Key combinations"). If the external keyboard does not feature an Fn key, you can simultaneously press the Ctrl + Alt Gr keys or the Ctrl + Alt keys. Cursor keys The cursor keys move the cursor in the direction of the arrow, i.e. up, down, left, or right.

Pause Break

Pause key The Pause key temporarily suspends display output. Output will resume when you press any other key. Start key The Start key invokes the Windows Start menu. Menu key The Menu key invokes the menu for the selected item.

Virtual numeric keypad

The keyboard of your notebook does not have a separate number block. To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers and symbols printed in the upper right corner of each key. If you have switched on the virtual numeric keypad, you can output the characters shown on the upper right of the keys.

& 7 U

* 8 I K M

( 9 O L <

Characters enabled when Num Lock indicator is not lit (see "Status indicators"). Characters enabled when Num Lock indicator is lit (see "Status indicators").

Key combinations

The following description of key combinations refers to functions when using Microsoft Windows. Some of the following key combinations may not function in other operating systems and with some device drivers. Other key combinations are described in the relevant manuals supplied with your application programmes. Key combinations are performed as follows:
Press and hold the first key in the combination. While holding the first key down, press the other key or keys in the combination.
Switching between internal and external screen If an external monitor is connected, the monitor on which the output is to be displayed can be selected with this key combination. You can opt to use: just the notebook's LCD screen just the external monitor both the LCD screen and the external monitor Switching the loudspeakers on and off This key combination switches your notebook's loudspeakers off and on. Decreasing screen brightness This key combination decreases screen brightness. Increasing screen brightness This key combination increases screen brightness. Reducing the volume This key combination reduces the volume of the integrated loudspeakers. Increasing the volume This key combination raises the volume of the integrated loudspeakers. Switching between open applications
With this key combination you can switch between several open applications. Backtab (Shift+Tab)
This key combination moves the cursor back to the previous tabular stop. Windows security/Task-Manager This key combination opens the Windows security/Task-Manager window.

Delete Sys Rq

Key combinations with the Windows keys are contained in the manual for your operating system.
Country and keyboard settings
If you want to change the country and keyboard settings, proceed as follows: Click on Start - (Settings) - Control Panel. Double-click on Regional and Language Options. Select the country settings you want to use. Click on Apply. Click on the Details button in the Languages tab. Click on Add to add other keyboard layouts to the selection. Select the keyboard layout you want to use in the Input Language field. Click on Apply and confirm with OK. Restart the notebook.
The current settings are displayed in the Regional Options tab.

Easy Launch keys

Your notebook is equipped with three Easy Launch keys.
E-mail Use this button to start the standard e-mail programme for your system. Internet With this button you can start the standard internet browser. Wireless LAN With this button you can switch on or off the wireless LAN module.

Monitor settings

Setting the desktop area The screen resolution of the LCD monitor of your notebook is optimally set at the factory. You can change the screen resolution under Start - (Settings) - Control Panel - Display - Settings. Changing the display brightness You can adjust the brightness of your LCD display with the keys Fn and F8 or F9. Changing the font size Under Start - (Settings) - Control Panel - Display - Appearance you can choose between a larger and a smaller font in the Font size field. Synchronising the display on the LCD screen and an external monitor Your notebook supports the simultaneous display on the LCD screen and an external monitor. Pressing the key combination Fn + F3 switches between LCD only, external monitor and LCD and external monitor only. The last setting is useful if you would like high resolution and refresh rate on an external monitor. Adjusting the speed of the mouse pointer You can change the speed of the pointer under Start - (Settings) - Control Panel - Accessibility Options Mouse under Settings in the fields Pointer speed and Acceleration.


The battery supplies your notebook with the necessary power during mobile use. You can increase battery life by enabling the system's power management features. The life of the battery is dependent on its proper storage, the number of charging/discharging cycles and the operating temperature of the notebook.
Charging, caring for and maintaining the battery
Only use batteries approved by Fujitsu Siemens Computers for your notebook. Take care not to drop batteries or otherwise damage their casing (fire risk). If rechargeable batteries develop a fault please stop using them immediately. Do not touch the contacts of batteries. Never interconnect the positive and negative terminals of a battery. Batteries are harmful to the environment. You should dispose of them following guidance from your local District Council.
You can charge the battery by connecting the notebook to the mains adapter. The battery can only be recharged if the ambient temperature of the notebook falls within the permitted temperature range. The time taken to load the battery depends on its usage. Information on the battery charging time is contained in the "Technical data" chapter. You can maintain long life from your battery by allowing it to discharge fully before you recharge it again. To do this, leave your notebook turned on when it is operated with the battery. Once the battery is running low you will hear a warning alarm. If you do not connect the mains adapter within five minutes of the warning alarm described above, your notebook will automatically switch to an energy-saving mode. Storing the battery Keep the battery pack between 0C and +30C (32 and 122 degrees Fahrenheit). The lower the temperature at which the batteries are stored, the lower is the rate of self-discharge. If you store rechargeable batteries for a longer period (longer than two months), the battery charge level should be approx. 30%. To prevent exhaustive discharge, check the charging level of the batteries at regular intervals.

The notebook boots and your hard disk is no longer protected against viruses.
Connecting external devices !
Before you connect or disconnect any devices from your notebook please read the safety notes in the Important notes chapter. Always read the documentation supplied with the device you wish to connect. Never connect, or disconnect cables during a thunderstorm. Never pull on a cable when disconnecting it. Always hold the plug. Follow the steps below in order, when connecting or disconnecting devices to your notebook: Connecting devices to notebook 1. 2. 3. 4. Turn off your notebook and all external devices. Unplug your notebook and all devices from the mains sockets. Connect the cables for your external devices following the supplied instructions. Plug all power cables into the mains sockets.
Disconnecting devices from notebook 1. 2. 3. Turn off your notebook and all external devices. Unplug your notebook and all devices from the mains sockets. Disconnect the cables for your external devices following the supplied instructions.
Some of the external devices require special drivers (see the operating system and external device documentation).
Connecting external devices

Connections on notebook

1= 2= 3= DC jack (DC IN) Modem port Optical drive
USB ports Headphones port Microphone port/Line In
1= 2= PC card slot FireWire port

3= LAN port

Connecting an external monitor
An external monitor can be connected to the notebook. Using the Fn + F3 key combination you can switch back and forth between the external monitor and the LCD screen. If your notebook is equipped with a TFT monitor, you can display the same picture on the external monitor and the LCD screen simultaneously. Switch off the notebook and the external monitor. Connect the data cable of the external monitor to the monitor port of the notebook. First switch on the monitor and then the notebook.
Setting the refresh rate for your external monitor The refresh rate must be correctly set so that the image does not flicker. Select the monitor type in the menu Start - (Settings) - Control Panel - Display - Settings - Advanced - Monitor. Now select the Adapter tab. Adjust the refresh rate and click Apply.

The operating system uses ACPI (Advanced Configuration and Power Interface) for power management under Windows XP. The energy saving functions can be activated under Start (Settings) - Control Panel - Power Options. Under Windows, Hibernate is activated by default.

Standby mode

Press the ON/OFF switch to switch the standby mode on and off.
You can configure the ON/OFF switch under Start - (Settings) - Control Panel - Power Options - Advanced.
In the Standby/Suspend-to-DRAM mode the content of your main memory is saved by continuing to supply the main memory with power, while the processor, monitor, hard disk and other internal components are switched off. This mode is activated each time you press the ON/OFF switch. Saving is also triggered when you do not make an entry on your notebook for a certain time. When you resume work, your notebook returns to the place at which you discontinued working.
If you use an integrated LAN/Modem, a PC-LAN card or a PC modem card, we do not recommend switching over to the Standby mode, as this may lead to an interruption in the network connection. When you press the ON/OFF switch for more than 4 seconds, you switch off your notebook.
Settings in BIOS Setup Utility
In BIOS Setup Utility you can set the system functions and the hardware configuration of the notebook. When it is delivered, the notebook is set to factory default settings. You can change these settings in BIOS Setup Utility. Any changes you make take effect as soon as you save and quit the BIOS Setup Utility. The BIOS Setup Utility programme contains the following menus: Main: Advanced: Security: Boot: Exit: for system settings such as time and date for system settings such as hard disks and monitor selection for password settings and safety functions for configuring the boot sequence to exit the BIOS Setup Utility

Start BIOS Setup Utility

Reboot the notebook (switch off/on or reboot operating system). <F12> Boot Menu The following or a similar display appears on the screen during booting: <F2> BIOS Setup When this message appears, press the function key F2.

If a password has been assigned: Enter the password and press the Enter key. If you have forgotten the password, contact your system administrator or contact our Hotline/Help Desk.
Operating BIOS Setup Utility
Press the F1 key to display help on the operation of BIOS Setup Utility. The description of the individual settings is shown in the right-hand window of the BIOS Setup Utility. With the F9 key you can load the default settings of the BIOS Setup Utility. Use the cursor key or to select the menu you wish to access to make changes. or.
The menu is displayed on the screen. Select the option you want to change with the cursor keys Press the Enter key. Press the ESC key to exit the selected menu. For future reference, make a note of the changes you have made (for example, in this manual).
Exiting BIOS Setup Utility
To exit BIOS Setup Utility, select the Exit menu from the menu bar. You can then decide which settings you want to save. The Exit menu offers the following options. Mark the desired option with the cursor keys Press the Enter key to confirm your selection. or.
Exit Saving Changes - save settings and exit BIOS Setup Utility Select OK to save the current settings in the menus and exit the BIOS Setup Utility. The device is rebooted and the new settings come into effect. Exit Discarding Changes - Reject changes and exit BIOS Setup Utility Select OK to discard the changes. The settings which were in force when BIOS Setup Utility was called remain effective. BIOS Setup Utility is terminated and the device is rebooted. Load Setup Default - Apply default settings Select OK to apply the default settings for all menus of the BIOS Setup Utility. The device restarts and the default settings become effective. Discard Changes - Reset settings Select OK to load the settings for all menus that were valid when the BIOS Setup Utility was started.
Save Changes Select OK to save changes in between without exiting BIOS Setup Utility.
Troubleshooting and tips !
Take note of the safety notes in the "Safety" manual, when you connect or disconnect cables.
If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows: Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the notebook off. Please contact the Hotline/Help Desk. The telephone numbers are contained in the supplied help desk list. Please have the following information ready when you call: The model name and serial number of the notebook. The serial number is located on a sticker on the underside of the notebook. Notes of any messages that appear on the screen and information on acoustic signals. Any changes you have made to the hardware or software after receiving the notebook. Any changes you have made to the BIOS Setup Utility settings after receiving the notebook. Your system configuration and all peripheral devices connected to your system. Your sales contract.

Reinstalling Windows XP

You can reinstall the Windows XP operating system with the "Windows XP Recovery CD" and the "Drivers & Utilities" CD/DVD. The instructions are provided on the case of the Recovery CD.
During the reinstall process your personal files and any installed programs will be deleted. We advise that you backup your files to an external hard drive, or CD / DVD disk before you start. Switch the notebook on. Press the F12 key when the message F2: Setup F12: Boot Menu appears on the screen. Insert the "Windows XP Recovery CD" into the optical drive. Select the CD-ROM and press the Enter key. Follow the instructions on the screen.
After the installation you must install all the drivers again. Some installed hardware components will not be correctly supported until this has been done. Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD/DVD starts automatically. Click on the Desk Update button.

Troubleshooting and tips

Select Automatic driver installation (Express) and click Start installation. Follow the instructions on the screen. Restart your notebook when the driver installation is completed.
The notebook's date or time is incorrect
or Set the time and/or date in the BIOS Setup-Utility menu Main. Double-click on the clock in the task bar and adjust the time.
If the date and time are repeatedly incorrect when you switch on the notebook, the buffer battery that supplies the internal clock is dead. Contact your sales outlet or our hotline/help desk.
The LCD screen of the notebook remains blank
The screen power-management feature may be active. Press any key to activate the display.
The notebook is in Standby or Suspend mode. Press the Suspend/Resume button to end the Standby or Suspend mode.
The display angle or brightness may not be properly adjusted. Change the display angle and set the brightness by pressing the key Fn together with the key F8 (darker) or F9 (brighter) until the picture appears correct.
The notebook is set so that the picture only appears on the external screen. Press the key combination Fn + F3 to switch over the display to the LCD screen or to specify the simultaneous display on the LCD screen and the external screen.
The external monitor stays blank
Monitor is switched off Switch the external monitor on.
Power saving has been activated (screen is blank) Press any key to continue.

If the operating system is reinstalled, all data created up to that point will be lost. Make regular back-up copies of your data.
The notebook stops working
The notebook is in Standby or Suspend mode. Reactivate the notebook by pressing a key (Standby mode) or by switching it back on (Suspend mode).
The application programme has caused the malfunction. Close the application programme or restart the notebook by switching it on/off or with a warm boot.
The battery is dead. or or Connect the mains adapter to the notebook. Install a charged battery. Charge the battery.

The mouse does not work

Mouse is not connected Switch the notebook off. Check whether the mouse cable is correctly connected to the notebook. If you use an adapter or extension lead with the mouse cable, check the connections. Switch the notebook on.
The printer does not print
Make sure that the printer is switched on and is on-line (see the manuals supplied with the printer). Check that the cable connecting the notebook and the printer is connected properly. Check whether the correct printer driver is loaded (see printer documentation).

Acoustic warnings

A beep sounds every few seconds. The battery is almost flat. Charge the battery.
Error messages on the screen
This section describes the error messages generated by the BIOS Setup Utility. Error messages displayed by the operating system or programmes are described in the relevant documentation. CMOS Battery Bad If the error message occurs repeatedly, the buffer battery in the notebook is flat. Contact your sales outlet or our hotline/help desk. System CMOS checksum bad - Default configuration used The system configuration information is incorrect. Switch the notebook off. Switch the notebook on. Enter the BIOS Setup Utility by pressing F2. Select the entry Load Setup Defaults. Mark OK. Press the Enter key.
If the error message appears repeatedly, please contact the place of purchase or our hotline/help desk. Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz When testing the extended memory an error has resulted at the address xxxx. Check whether the additional memory module has been inserted correctly. If the error message appears repeatedly, please contact the place of purchase or our hotline/help desk. Keyboard controller error Switch the notebook off with the ON/OFF switch. Wait 3 - 5 seconds and switch on the notebook again.

Survey, security functions 41 Suspend mode, terminating 64 Suspend/Resume button 58 Switch between open applications 24 Synchronisation, screen display 28 System configuration 59 System memory 50 System settings, BIOS Setup Utility 59 T Task Manager 24 Technical data 67 battery 68 mains adapter 68 Time daylight savings 62 not correct 62 Tips 61 Touchpad 7, 26 buttons 7, 26 cleaning 5 dragging items 27 executing commands 27 moving the pointer 26 selecting items 26
Transport 4, 5 Travel preparations 4 Troubleshooting 61 U USB connecting devices 48 port 8, 46, 47 V VGA port, see monitor port Video devices, connecting 48 Virtual numeric keypad 23 Volume adjustment 48 decreasing 24 increasing 24 W Windows security 24 Wireless LAN 38 Easy Launch key 25 switching off module 38 switching on module 38


Port Replicators

Get connected to your peripherals in no time

October 2006

Flexibility, expandability, desktop replacement, investment protection to name just a few benefits of Fujitsu Siemens Computers docking options. Our Port Replicators are the perfect docking solutions for the AMILO Pro Series, LIFEBOOK Series and CELSIUS Mobile workstation - our professional notebooks - to simplify your mobile life. In the office or at home it takes just a second to attach your notebook to the Port Replicator and get connected for example to your external display, keyboard and mouse. Your workplace is simple and tidy while you are ready to work with your notebook.
Reliability High quality and stability Reliability of delivery Everything you need from one company Diversity Accessories for differentiated demands Meeting highest demands in terms of ergonomics and usability
Usability Keep your notebook simply connected to all needed peripherals Easy connection through docking interface for maximum convenience and ease of use Leave your peripherals plugged to the Port Replicator and turn your notebook into a real desktop Wide range of interfaces Hot docking
Data Sheet Issue: October 2006 Port Replicators

Page 2 / 3

Port Replicator USB 04 AMILO Pro V Edition Order Code Dimensions (HxWxD Weight S26391-F6007-Lx 187 x 70 mm 0.16 kg
Port Replicator AMILO Pro V8210 Order Code Dimensions (HxWxD) Weight S26391-F400-Lx 250 x 70 mm 0.3 kg
Port Replicator LIFEBOOK S2110 Order Code Dimensions (HxWxD) Weight S26391-F670-Lx 300 x 61 mm 0.3 kg
Order Code Dimensions (HxWxD) Weight
Port Replicator LIFEBOOK C1410 LIFEBOOK E8110 LIFEBOOK E8210 LIFEBOOK S7110 CELSIUS H240 S26391-F5031-Lx 368 x 116 mm 0.58 kg
Port Replicator LIFEBOOK P1510 Order Code Dimensions (HxWxD) Weight S26391-F5031-Lx 275 x 193 mm 0.38 kg
Port Replicator LIFEBOOK P7120 Order Code Dimensions (HxWxD Weight S26391-F5039-Lx 283 x 97 mm 0.28 kg
Port Replicator LIFEBOOK T4210 (backward compatible to LIFEBOOK T4010) S26391-F413-Lx 305 x 82 mm 0.37 kg
Port Replicator LIFEBOOK Q2010
S26391-F340-L500 26,7 x 315 x 268 mm 0,873 kg

Page 3 / 3

Overview Interfaces
Port Replicator USB 04 AMILO Pro V Edition
Port Replicator AMILO Pro V8210
Port Replicator LIFEBOOK C1410 LIFEBOOK E8110 LIFEBOOK E8210 LIFEBOOK S7110 CELSIUS H240 S26391-F5031-L550 1x 1x
Port Replicator LIFEBOOK S2110
Order code Power Power-on switch PS/2 Serial Parallel USB
S26391-F6007-L100 ----1x 1x 1x 3 x USB 2.0 ------10/100 ----2)

S26391-F400-L100 1x

S26391-F670-L400 1x
--1x 1x 1x 2 x USB 2.0 1x ----10/100
--1x 1x 1x 2 x USB 2.0 1x ----4) 2)
1x 1x 4 x USB 2.0 1x 1x --10/100/GB LAN line in and line out 1x Incl. lock function for plugged notebook 0.58 kg 43 x 368 x 116 mm --Port Replicator LIFEBOOK T4210
VGA DVI-D S-Video out LAN Audio Kensington lock support Weight Dimensions (HxWxD) Optical disk drive

10/100 --1x

line out ---
0.16 kg 26 x 187 x 70 mm --Port Replicator LIFEBOOK P1510
0.3 kg 25 x 250 x 70 mm --Port Replicator LIFEBOOK P7120
0.3 kg 30 x 300 x 61 mm --Port Replicator LIFEBOOK Q2010

S26391-F5031-L500 1x

S26391-F5039-L900 1x
S26391-F413-L100 1x ------4 x USB 2.0 1x 1x --1)
S26391-F340-L500 1x ------4 x USB 2.0 1x ----1)

--------2 x USB 2.0 1x ----10/100 ----0.38 kg 45 x 275 x 193 mm --4)
--------3 x USB 2.0 1x --1x 10/100 --0.28 kg 35 x 283 x 97 mm --4)
10/100/GB LAN line out --0.37 kg
10/100/GB LAN 1x 0.873 kg
line in and line out/SPDIF

line in and line out

34 x 305 x 82 mm ---
26.7 x 315 x 268 mm DVD DL super multi drive
1) Power pass through use the AC power adapter that ships with your AMILO Pro Series or LIFEBOOK Series or with an optional adapter 2) Y-cable for mouse and keyboard connection is available as separate option; please use order code S26391-F192-L560 3) USB 2.0 pass-through port (will function as USB 1.1 port for system with USB 1.1). 4) Gigabit Ethernet pass-through port (will function as 10/100 ethernet port for system without gigabit ethernet).
All rights, including rights created by patent grant or registration of a utility model or design as well as rights of technical modifications are reserved. Delivery subject to availability. Designations may be trademarks, the use of which by third parties for their own purposes may violate the rights of the trademark owners. Copyright Fujitsu Siemens Computers, 10/2006
Published by Fujitsu Siemens Computers

Company stamp



TFT-721 SF1600 DR-MH30se-dr-mh30 JBL L56 ED-X3400 Volvo V50 Review Aircoustic BAR888 LE26M51B ART X-12 HBR653 DTB-P850Z RA-117 AM400 KV-32FQ70K Asko 1475 CMT-CP555 TDM-NC1 KX-FHD332 Voyager M-650V Axim X3 Blower VAC HC280ML PM-16 Chamberlain 3950 450 SMR Ironhide ZD8612 IS Kxtg7321E LN-505 Lexmark X652 SD200 3vaav Style DV3 HK 3390 Pqg30 Humminbird 570 AX-4103 JH-1D Husqvarna 445E DSP-AX1400 LC-90MK2 LS0714 KH 6525 CFD-S32L Optio W80 VRX756VD Tecra M4 Wharton 4850 680 GSM BT150 Motoslvr L6 Procam RSX-972 A-3300 4 CV UR 1200 DCR-DVD105 TX-SE500 ONE V1 ESL67030 Yamaha Neos ZEN V2 GT-S5510 Bread 32PFL3403D 12 NW-A919 AVR-5805 KDL-32NL140 Dopod 838 FW-C330-21M VMH855LE 32PF4320 DSC-S60 4 8 MG50DFX TE1025V PT-LB75NTU TOB-195 MFC-5440CN Motorola W360 Zanussi F550 LE37M86 Computer RH1977 EOB31004X FL125 PMC-37PRO EFA9620X RRM320PU XA8800MNU WM-EX402 ICF-DS11IP PX-A620 Mitsubishi M21I GR-482SF Darkmoon XV-N30 Designjet 430


manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding



1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101