A26391-K165-Z120-1-19, Edition 3
Synchronising data with ActiveSync....34 Connecting the Pocket PC with PC/Notebook...35 Synchronising data with new PC/notebook...35 Using the cradle....36 Configuring the Pocket PC....39 Energy management optimising....39 General information on energy management....39 Using energy-saving functions....40 Adjusting menus....41 Password protection....41 Configuring hardware keys.....42 FSC KeyLock: Preventing switch-on with application buttons..42 Assigning chosen functions to the hardware buttons...42 Connecting and networking the Pocket PC with other devices...43 Wireless data transfer with infrared interface...43 Wireless connection via Wireless LAN (optional)...43 Wireless communication with Bluetooth (optional)....44 Selecting location for Bluetooth operation....44 Activating and deactivating Bluetooth....44 Troubleshooting and tips.....45 Installing new software....45 The Pocket PCs time or date are not correct....45 The display of the Pocket PC remains dark...45 The display is hardly readable....45 The Pocket PC switches off....45 The Pocket PC does not start after switch on....46 The Pocket PC stops working....46 The battery discharges too quickly...46 The Suspend/Resume button does not respond properly...47 No sound or minimal volume....47 Poor reception via GPS....47 Contact with hotline/help desk....47 Technical data.....49 Pocket PC....49 Battery (Li-Ion)....50 PSC11R-050 power adapter....50 Index.....51

Your Pocket LOOX

. is equipped with the Office applications Microsoft Word, Excel and Outlook. In Outlook you cannot only receive and send mails, but also manage your appointments and be reminded of your tasks. You can access names, e-mail addresses and telephone numbers while you are away from your home or office. You can store notes in written form or verbally as with a dictation device. Memory cards ensure that even large amounts of data can be carried along reliably. Install ActiveSync on your notebook or PC, connect the Pocket LOOX to your notebook or PC and you can synchronise your data. In the office you can then effortlessly transfer all your data and newly created documents to your notebook or PC. With the optional USB Host line you can use your Pocket LOOX as a USB Host device. You can connect different USB devices, such as a MEMORYBIRD, to the Pocket PC. Read your favourite book quite comfortably away from home on the display or use the MP3 player. Insert the memory card of a digital camera in the slot and you can view the photos on the display. Depending on the equipment of your unit with infrared or Bluetooth and wireless LAN you can establish a connection to other devices at the office and away from it without bothersome cables. For example, you can access the Internet using the Pocket LOOX with Bluetooth via your Bluetoothcapable mobile phone. You can call up both web and WAP pages with the Internet Explorer. With a GPS receiver and navigation software you can use the Pocket PC as a navigation system. The following documentation contains additional information on your Pocket PC and the Windows Mobile operating system:

CONNECTMOBILITY-E2C

FSC Voice Recorder
Brings real Dictaphone functionality to the Pocket LOOX
Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD

FSC Audio Path

Comfortable operation of the multiple active audio outputs on the Pocket LOOX

FSC Panning

Problems when scrolling in the Internet Help file on the Pocket-PC Explorer Mobile? and user manual "Pocket LOOX Software Suite" on the FSC Panning quickly brings window Microsoft Getting Started CD contents into view. Especially useful on large websites. Protects against accidental starting of the Pocket-PC when a key is pressed Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD

FSC KeyLock

Optional Software
The following table provides an overview of the most important programs which are already installed on your Pocket PC, depending on the device variants or software installations, and information on where you can find information on using these programs. In addition to these programs, you can install a range of programs at a later date. Software FSC Password Used for Protection against theft permanent passwords for protecting against misuse Patented solution. FSC Backup Partial and full data backup on external memory modules Operating information Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD Help file on the Pocket-PC and user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD

FSC MobileZip

Open, unpack, create and edit Zip archives

GPSLocator

GPS Locator illustrates the basic functions of your GPS system

Optional Accessories

We offer a range of accessories to make it easier and more convenient to work with your Pocket PC. Information on additional accessories for your Pocket LOOX is provided on the Internet at www.fujitsu-siemens.com/accessories. Below you will find a short description of the special accessories for your Pocket PC.

Connecting PSC11R-050 power adapter
You can connect the PSC11R-050 power adapter directly to the Pocket PC. Slide the suitable power adapter plug into the PSC11R-050 power adapter in the direction of the arrow until it engages.
Connect the ActiveSync cable (1) to the ActiveSync port on the Pocket PC. Connect the power adapter cable (2) to the DC socket of the ActiveSync cable. Connect the PSC11R-050 power adapter (3) to an electrical outlet.
The installed battery will now be charged. The power-on indicator flashes orange.
Please note that: Do not connect your Pocket PC to your computer (PC/notebook) yet. Before the first data synchronisation between your Pocket PC and your PC/notebook, you must install the program ActiveSync on your PC/notebook.
Installing ActiveSync on your PC/notebook
The data synchronisation helps you always keep your data on your Pocket PC and your PC/notebook up to date when you work alternately with your PC/notebook and your Pocket PC. The ActiveSync cable and the ActiveSync software are provided for data synchronisation. ActiveSync is already installed on your Pocket PC. You need only install ActiveSync on your PC or notebook. You will find the program ActiveSync and the necessary driver on the Microsoft Getting Started CD. Insert the Microsoft Getting Started CD in the optical drive of your PC/notebook. If the installation program of ActiveSync does not start automatically, you must double-click on the file Setup.exe of ActiveSync. Follow the instructions on the screen. Prepare the Pocket PC as described in the section "Start Pocket PC for the first time". The installation program of ActiveSync will start.
During the installation the software attempts to establish a connection to the Pocket PC.
If you have not yet installed Outlook on your PC/notebook, you must install it on your PC/notebook before the first data synchronisation between your Pocket PC and your PC/notebook. You will find Outlook on the supplied Microsoft Getting Started CD.
Connect the ActiveSync cable to a USB port (1) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your Pocket PC and your PC/notebook will be established.

Start Pocket PC for the first time
Press the Suspend/Resume button (1) to switch on the Pocket PC. Pull out the pen (2) in the direction of the arrow.
Adjusting touchscreen The display of your Pocket PC is a touchscreen. To ensure that the touchscreen of your Pocket PC reacts correctly when touched with the stylus, you will be asked to align the touchscreen after the initial start-up. Touch the centre of the cross hairs that appears on the display with the stylus. This procedure must be repeated several times, whereby the cross hairs appear at different locations on the display each time. Follow the instructions on the display. Becoming familiar with basic operation Next the operating system provides a brief introduction to the operation of the Pocket PC with the stylus after the initial start-up. Follow the instructions on the display.
Today screen Following the introduction the Today screen appears. The Today screen shows all important current information at a glance. From this screen you have access to all programs and to the system settings.
Please also use the help function available on your Pocket PC if you want to know more about running the programs contained in the operating system.
First data synchronisation between the Pocket PC and the PC/notebook
After you have specified the desired and required settings for synchronisation in the ActiveSync Setup Wizard, the first synchronisation starts automatically.
Switching Pocket PC off and on
Switch the Pocket PC on or off with the Suspend/Resume button. After certain applications or the installation of new programs, it may be necessary to restart the Pocket PC with the soft reset. It is only necessary in seldom, exceptional cases to reset the Pocket PC to the delivered state.
1 = Suspend/Resume button
Switching Pocket PC off and on during normal use
Switching off with Suspend/Resume button Briefly press the Suspend/Resume button to switch off the Pocket PC. The Pocket PC is switched to suspend mode.
If you have specified a switch-off time with the system settings, your Pocket PC will automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC: Switching on with Suspend/Resume button Briefly press the Suspend/Resume button to switch on the Pocket PC.

Using navigation key

With the navigation key (1) you scroll within the menus (up, down, to the left and right) and activate menu entries by pressing the centre of the navigation key.
Using the application buttons
1= 2= 3= 4= Navigation button (N) or CONNECTMOBILITY-E2C button (C) Today button Contacts button Calendar button
With the application buttons and the appropriate preset (see chapter "Configuring the Pocket PC"), you can open your preferred programs and applications directly from suspend mode or from within an application. Because the application button react differently to short or long keystrokes you can assign a total of eight different programmes or applications to the application buttons.
Making the display lighting lighter and darker
You can adjust the display lighting to make it darker or brighter using a combination of keys. Reduce the display brightness to save energy. To make the display lighting brighter: Press the Today application button and keep it pressed down. Press the left arrow key on the navigation button until you obtain the desired brightness. Press the Today application button and keep it pressed down. Press the right arrow key on the navigation button until you obtain the desired brightness.
To make the display lighting darker:
Inserting and removing expansion card
A slot enables the operation of an expansion card of the type "Secure Digital I/O" or "MultiMediaCard".
Observe the manufacturer's instructions when using the expansion cards. Never use force when inserting or removing an expansion card. Make sure that no foreign objects enter the slot.

Inserting expansion card

Also press on the edge of the placeholder (1) so that the placeholder is pushed out of the slot somewhat. Pull the placeholder out of the Pocket PC (2). Carefully push the expansion card (3) into the slot.
The expansion card can protrude by one to several millimetres (depending on the type of expansion card).
Keep the placeholder for the expansion card in a safe place. When you remove the expansion card again, you should reinsert the expansion card placeholder. This prevents foreign matter from getting into the slot.

Removing expansion card

Press on the edge of the expansion card (1) so that the expansion card jumps out of the slot slightly. Slide the expansion card out of the Pocket PC (2). Insert the placeholder (3) again into the slot if necessary.
The placeholder protrudes one to two millimetres.
Use the Pocket PC as a USB Host device
With the optional USB Host cable you can use your Pocket PC as a USB Host device and connect various USB devices, such as a MEMORYBIRD, to the Pocket PC. The USB Host cable is available as an accessory under the name "Sync Cable USB client/host".

You can connect USB devices from Fujitsu Siemens Computers (e.g. MEMORYBIRD or STORAGEBIRD) immediately. If you want to connect other USB devices, ask your dealer whether drivers must be installed. The current consumption of the USB device may not exceed 100 mA (at +5 V). USB devices with a current consumption of more than 100 mA must be supplied with power via their own power supply.
Connect the USB host cable (1) to the ActiveSync port on the Pocket PC. Connect the USB device (such as a MEMORYBIRD) to the USB port (2) of the USB Host cable. If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power adapter (see section "Connecting PSC11R-050 power adapter ").
The USB device is now connected to your Pocket PC.

Using GPS

With a GPS receiver and navigation software you can use the Pocket PC as a navigation system. Depending on the equipment, the GPS receiver is either integrated or available as an external accessory.
Card materials for your Pocket PC is available from retailers on DVD or on memory cards or via an online shop.
You have two options for using the navigation software on your Pocket PC: You can use the navigation software on a preinstalled expansion card. You can install the navigation software via your PC, e.g. from a DVD.
To register your navigation software you require the serial number of the navigation software and possibly also the device ID of your Pocket PC. The device ID will be displayed after the initial start-up of the navigation software if necessary. Register your navigation software and your card materials as described in the instructions for the navigation software.
A description of how to use the navigation software is provided in the instructions on the navigation software.
If the reception signal is weak, you can connect an external GPS antenna. The external GPS antenna improves performance in difficult reception conditions. The external GPS antenna is available as an accessory.

Charging the battery

Your Pocket PC is equipped with a powerful battery. When you're on the road your Pocket PC is supplied with power by the integrated battery.
The battery is not charged on delivery and should be charged for 12 hours prior to the first mobile use. The battery charging time is otherwise approx. 4 hours. When the Pocket PC is operating, the charging time is extended.
You have three ways of re-charging the battery: You can connect the Pocket PC directly to an electrical outlet with the PSC11R-050 power adapter. You can connect the cradle to an electrical outlet with the PSC11R-050 power adapter and insert the Pocket PC in the cradle. You can connect the Pocket PC to a computers USB port using the ActiveSync cable.

Switch your computer (PC/Notebook) on. Place the Pocket PC in the cradle (1). Connect the ActiveSync cable (2) to the ActiveSync port of the cradle. Connect the ActiveSync cable to a USB port (3) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your Pocket PC and your PC/notebook will be established. If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050 power adapter (see section "Connecting PSC11R-050 power adapter ").
You can continue to leave the cradle connected to the power adapter PSC11R-050 and the cradle connected to your PC/Notebook with the result that you only have to place your Pocket PC into the cradle in order to charge the battery or to synchronise data.
More information on data synchronisation is contained in the section "Synchronising data with ActiveSync" and in the Help file on your Pocket PC.
Configuring the Pocket PC
You can already choose from a large number of programs when you use the Pocket PC for the first time. In addition, proven default settings are defined for the menu structure, energy management, memory management and security functions. But, of course, you can add and remove programs and configure the Pocket PC as desired. You will find out how to use some of the functions (e.g. energy management) in this section. For information on removing and adding programs, please refer to the documentation from the software manufacturer and the ActiveSync help file, that you can call at any time after installing ActiveSync on your notebook/PC.
Energy management optimising
General information on energy management
The battery operating time is considerably dependent on the applications used. Please consider that a particularly large amount of energy is required to play sound files or make sound recordings. Therefore, if you want to work for up to 12 hours without a power connection, limit the use of energyintensive applications. Data exchange with a PC or notebook also consumes additional battery power. Therefore, always connect your Pocket PC to an electrical outlet during data exchange if possible.
Using energy-saving functions
You can save energy in several ways to optimally utilise the battery operating time: Switch the Pocket PC into the Suspend mode when you are not using it. Reduce the processor speed. Switch the display lighting off or reduce the brightness. Switch off the sound, reduce the volume or only allow acoustic signals for certain applications.
Switching the Pocket PC into Suspend mode Select the number of minutes after which the Pocket PC is to switch into the Suspend mode when it is not used under Start - Settings - System - Power.

Press the Suspend/Resume button to deactivate the Suspend mode. The Pocket PC returns to the point at which you interrupted your work.
Switching off display lighting Select the number of minutes after which the display lighting is to be switched off in the battery mode when the Pocket PC is not used under Start - Settings - System - Backlight.
Reducing brightness Reduce the display brightness under Start - Settings - System - Backlight.
Switching on the sound and setting the volume Touch the loudspeaker symbol in the navigation bar. Set the desired volume on the slide control with the stylus. To switch off the sound, activate the selection field for Off with the stylus. Touch the display anywhere outside the popup window. A popup window for the loudspeaker settings appears.

Adjusting menus

Frequently used programs appear in the Start menu. You can adjust the Start menu to meet your needs. Touch the Menus symbol under Start - Settings - Personal. A list of programs/applications appears. To remove programs from the Start menu, click in the checkbox of the program. The check mark is removed from the checkbox. To add programs to the Start menu, click in the checkbox of the desired program. A check mark appears in the checkbox. You can also use the program FSC SpeedMenu as an alternative for fast access to programs and files. You can quickly and simply adapt FSC SpeedMenu to your requirements. Additional information on this subject is provided in the user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD.

Password protection

You can protect your Pocket PC from unauthorised access with a password. This makes your data accessible only to persons who know the password. Touch the Password symbol under Start - Settings - Personal. Select the type of password you prefer: A password consisting of four numbers (simple 4-digit password). A password of alphanumeric characters (a complex alphanumeric password).
If a password has been entered, you will have to enter this password the next time you switch on. If you have forgotten your password, you can restart your Pocket PC by resetting it to the delivered state (see section "Resetting Pocket PC to delivered state").
Configuring hardware keys
FSC KeyLock: Preventing switch-on with application buttons
By default, your Pocket LOOX starts up if the Suspend button and an application button are pressed. In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is pressed. You can find the FSC KeyLock under Start Settings Personal Keys - FSC KeyLock. You will find further information in the help file on your Pocket LOOX and in the user manual "Pocket LOOX Software Suite" on the Microsoft Getting Started CD.
Assigning chosen functions to the hardware buttons

The buttons of your Pocket PC are assigned certain functions such as running programs. However, you can change these default settings and assign the buttons the functions of your choice. Tap Start. Select the Settings entry in the menu. Touch the Buttons symbol on the Personal tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application buttons appear in the list twice. This is because you can assign different applications to these buttons for short and for long keystrokes. Mark the button in the list for which you want to change the assignment. Select the program you want to assign to this button from the list below it. Touch OK (navigation bar) to confirm your setting.
The button is now assigned the desired program. If you want to change the function of several buttons, we advise you to make a note of the new functions.
Connecting and networking the Pocket PC with other devices
The Pocket PC offers a wide range of ways to exchange data with other devices or to work in a network. You are already familiar with data synchronisation via ActiveSync and the ActiveSync cable in the section "Synchronising data with ActiveSync". You can connect the supplied ActiveSync cable to all PCs notebooks with a USB interface. An active ActiveSync cable for devices with a serial port is also available as an accessory. In addition, the infrared interface, wireless LAN (optional) and Bluetooth (optional) are available for wireless communication. This chapter provides you with information on wireless data transfer via infrared interface via wireless LAN via Bluetooth
Wireless data transfer with infrared interface
The infrared interface (IrDA) permits wireless serial data transfer with up to 115 kbits/s. For data transfer, you must align the infrared interface of your Pocket PC with that of the partner device. The devices must not be more than one metre apart. The infrared interface of one device must be in the range of influence (horizontally approx. 30 and vertically approx. 15) of the infrared interface of the other device. The infrared interface is simultaneously a consumer infrared interface (CIR). The CIR interface can transmit over greater distances. As a result, you can also use the Pocket PC as a remote control with suitable software. You will find information on how to create an IR connection and exchange data in the Help on your Pocket PC.

Wireless connection via Wireless LAN (optional)
Your Pocket PC is equipped with an integrated wireless LAN. Information on this topic is provided in the help file on your Pocket PC. You can also activate and deactivate the integrated Wireless LAN just as you wish. Touch the WLAN Power symbol under Start - Settings - System.
Wireless communication with Bluetooth (optional)
With your Pocket PC with an integrated Bluetooth module you can communicate wirelessly with other Bluetooth devices, e.g. with another Pocket PC, a notebook or a mobile phone. In the following sections, you will find out how to put Bluetooth into operation. The help file for the software on your Pocket PC explains how you operate the software concerned.
Selecting location for Bluetooth operation
We recommend that you use the Pocket PC with the Bluetooth components in a typical operating environment. Other Bluetooth devices, which you want to communicate with, should be located at a distance of up to 10 m. Only install a partner device within the recommended distance. Observe the output power class of the partner device when doing so. Details are contained in the operating manual of the partner device. Use the Pocket PC with the Bluetooth at least 2 m away from other electrical or electronic systems. If you must use the Pocket PC near a microwave cooker, then maintain a distance of at least 3 m from the microwave cooker, as the reception is subject to interference with regard to microwaves. Should problems result when communicating via Bluetooth because radios or radio devices are located in the vicinity, then move the Pocket PC to a different location.
Activating and deactivating Bluetooth
Touch the Connections tab under Start - Settings and then touch the Bluetooth symbol. You can switch Bluetooth on and off here.

Troubleshooting and tips

If a fault occurs in your Pocket PC, try to eliminate it with the measures described in this chapter. If you fail to correct the problem, proceed as follows: Make a note of the steps and the circumstances that led to the fault. Also make a note of any error messages displayed. Switch the Pocket PC off. Contact your sales outlet or our hotline/help desk.

Installing new software

You will find information on installing supplementary programs in the ActiveSync help file that you can call up after installing ActiveSync on your PC/notebook. When installing programs or drivers important files can be overwritten and modified. In order to gain access to the original files if any problems occur after installation, you should make a backup before installing (see section "Synchronising data with ActiveSync").

Poor reception via GPS

The installation position of the Pocket PC in your vehicle is unfavourable. Change the installation position of the Pocket PC.
Your vehicle's windscreen is coated. Use an external GPS antenna (available as an accessory).
Contact with hotline/help desk
If you are unable to solve a certain problem, please contact the hotline/help desk. Additional details are contained in the "Safety" and "Warranty" manuals. Please have the following information ready when you call:
The model name and serial number of the Pocket PC. The serial number is located on a sticker on the backside of the Pocket PC. Notes of any messages that appear on the screen and information on acoustic signals. Any changes you have made to the hardware or software after receiving the Pocket PC. Your system configuration and all peripheral devices connected to your system (e. g. keyboard). Your sales contract.

Pocket PC

Processor: Main memory: Intel PXA270 with up to 624 MHz (depending on model) 64 - 256 Mbyte ROM (depending on model) 64 Mbyte RAM Electrical data Regulations complied with: CE, FCC Part 15 Class B, EN 60950, UL, cUL Protection class: Maximum power draw: (when Pocket PC is on with battery charging) Display Transflective TFT display: Card slots 1 x slot: Ports/interfaces Audio: Data: Microphone, loudspeaker, headphones (3.5 mm) or remote control Consumer IrDA, USB 1.1 Host/Client, serial (RS232; supports DTR/DTS), Bluetooth 1.2 Class 2, Wireless LAN (IEEE 802.11g), GPS Sirf Star 3 (depending on model) "Secure Digital I/O", "MultiMediaCard" 3.5 inch QVGA, 240 x 320 pixels, 65,536 colours 3.6 inch VGA, 480 x 640 pixels, 65,536 colours III 10 W
Environmental conditions Environment class 3K2, 2K2 Housing class 7M2 Temperature: Operating (3K2) Transport (2K2) Dimensions Height/width/depth: Weight: 115.7 mm x 70.2 mm x 14.6 mm approx. 145 g (depending on model) DIN IEC 721 EN 60721 DIN IEC 721 EN 60721 5C 40C -25C 60C

Battery (Li-Ion)

Rated capacity: Charging time (when not in operation): Operating time: 1200 mAh Max. 4 hours up to 12 hours up to 350 hours in stand-by mode

Today button, 12 Today screen, 18 Transport, 8 Travel, Pocket PC, 8 Troubleshooting, 45 U Using navigation key, 24 Using the application buttons, 25 Using the cradle, 36 Using the pen, 24 V Volume, minimal, 47 W Warm boot, 21 Wireless data transfer, 43, 44 Wireless indicator, 13 Wireless LAN, 43 WLAN, 43 indicator, 13

Pocket LOOX N Series Life is too short for searching

May 2006

Navigation has never been so easy. The fully integrated GPS solution will bring you to every destination stress free. Of course, the Pocket LOOX N Series is more than a perfect navigation system. Expand your handheld with SD-I/O / MM cards for storing data, backup and additional applications like navigation, multimedia and more. TM Use a wide range of standard office applications, courtesy of Microsoft Windows Mobile 5.0 Premium Edition. Smart people on the move will appreciate the brilliant TFT display, the light weight and the outstanding design of the new Pocket LOOX N Series Reliability
TM Microsoft Windows Mobile 5.0 Premium Edition incl.: New Office Mobile Suite: Word, Excel and Power Point mobile MSN Mobile Windows Media Player 10 for Pocket PC Secure device management Persistent Store for optimized data protection
Connectivity Total data access, everywhere with integrated: Infrared Wi-Fi certified WLAN 802.11b/g (depending on model) Bluetooth V1.2 (depending on model) Integrated powerful SiRFstar III GPS module for perfect navigation Pocket LOOX Software Suite incl. Fujitsu Siemens Computers CONNECTMOBILITY E2C for easy connection to your network (depending on model)
Mechanical and functional stability proven by extensive quality tests Password protection saves your data in case of loosing your Pocket LOOX Broad range of accessories like SD memory cards, battery, leather cases and more Software-Choice program for individual download (tools, games, multimedia applications and more) http://www.pocketloox-choice.com
Efficiency Outstanding design for the highest level of integration Light and compact format to fit in your pocket Superb display for a perfect viewing experience, indoor and outdoor Strong and changeable battery guarantees ultimate independency from jack. Fast access to your favorite applications through Fujitsu Siemens Computers Speed Menu Highest expandability due to built in SD-I/O / MMC slot, for archiving business data, pictures or multi media files
Data Sheet Issue: May 2006 Pocket LOOX N Series

Page 2 / 2

System Processor

Memory GPS Display

Wireless LAN Bluetooth V1.2 Docking station Software Voucher
Pocket LOOX N500 Intel PXAMHz based on Intel XScale microarchitecture System memory (RAM) 64 MB Flash memory (ROM) 64 MB Full integrated SiRF Star III Chip 3.5-inch QVGA 240 x 320 color transflective TFT Touchscreen, 65.536 colors, LED backlight -
Pocket LOOX N520 Intel PXAMHz based on Intel XScale microarchitecture System memory (RAM) 64 MB Flash memory (ROM) 128 MB Full integrated SiRF Star III Chip 3.5-inch QVGA 240 x 320 color transflective TFT Touchscreen, 65.536 colors, LED backlight Integrated, 802.11b/g, Wi-Fi certified 3 points
Pocket LOOX N560 (04/2006) Intel PXAMHz based on Intel XScale microarchitecture System memory (RAM) 64 MB Flash memory (ROM) 128 MB Full integrated SiRF Star III Chip 3.5-inch VGA 480 x 640 color transflective TFT Touchscreen, 65.536 colors, LED backlight Integrated, 802.11 b/g, Wi-Fi certified Integrated Integrated 5 points
Interfaces 1 x built-in microphone 1 x speaker 1 x headphone (3.5 mm) 4 pin 1 x IrDA USB 1.1 (slave) via sync cable USB 1.1 (host) via sync cable Serial (RS232) via sync cable Stereo Audio Out on cradle connector Expansion slots SD card/MM card (SD I/O) Battery Exchangeable Lithium-Ion battery, rechargeable Main battery 1200 mAh Power supply Rated voltage V Power cord with EU plug, UK plug additionally available, standard in UK versions Standby time Fully charged 500 h
Battery life may vary depending on product model, configuration, applications, power management settings and features utilized. Battery recharge time depends on usage.
Dimensions / weight Dimensions (H x W x D) 116 x 71x 14 mm Weight app. 160g Wireless Technologies (WLAN) depending on model Import and usage according to country-specific regulations The Pocket LOOX Series is Wi-Fi certified Operating system Microsoft Windows MobileTM 5.0 Premium Edition Applications Fujitsu Siemens Computers SpeedMenu Fujitsu Siemens Computers Key lock Fujitsu Siemens Computers CONNECTMOBILITY E2C (depending on model) Fujitsu Siemens Computers Voice Recorder Fujitsu Siemens Computers Audio Path Fujitsu Siemens Computers Panning Fujitsu Siemens Computers Password (depending on model)

Outlook Mobile, Word Mobile, Excel Mobile, PowerPoint Mobile MSN Mobile Pocket Internet Explorer Windows Media Player 10 for Pocket PC Pictures Terminal Services Client Bubble Breaker Solitaire Voice recorder Microsoft Active Sync 4.1 Microsoft Outlook 2002 Supports Microsoft Outlook 2000, 2002, 2003, XP Software voucher for software download with prepaid license fee (depending on model) Standard delivery package Handheld device Docking station (depending on model) Two stylus pens (depending on model) Carrying case USB sync cable AC adapter with cable (country specific EU/UK) Microsoft Getting Started CD Getting Started poster Safety instructions and warranty flyer Easy Guide on CD Warranty manual on CD Options / accessories SD cards Main battery External GPS antenna Navigation bundles Remote control for ear phone (audio control set) Leather cases USB docking station with 3.5.mm audio jack Stylus / SD slot cover pack AC adapter, car adapter USB sync cable (slave / host) http://www.fujitsu-siemens.com/accessories Additional Software available at http://www.pocketloox-Choice.com or http://www.pocketloox-Choice.de
All rights, including rights created by patent grant or registration of a utility model or design as well as rights of technical modifications are reserved. Delivery subject to availability. Designations may be trademarks, the use of which by third parties for their own purposes may violate the rights of the trademark owners. Copyright Fujitsu Siemens Computers, 03/2006
Published by Fujitsu Siemens Computers http://www.fujitsu-siemens.com/

Company stamp