6 of 26

A Interfaces at the rear: * 1x RS-232-C (serial, 9 pins) (usable for BMC or OS or shared) * 1x VGA (15 pins): If Front-VGA is used, then Rear-VGA is disabled * 3x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 2x LAN RJ45, 1x Service-LAN RJ45 Interfaces on the front: * 3x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 1x VGA (15 pins): If Front-VGA is used, then Rear-VGA is disabled
Interfaces internal: * 1x USB 2.0 ( UHCI ) with 480MBit/s for dongle funcionality ( uSSD memory ), no USB wakeup * 1x SATA interface for DVD ( only usable with 6x 2.5" HDD + DVD Option ) * 4x SATA interface for 4 SATA HD`s ( only usable with 6x 2.5" HDD + DVD Option ) Cables: 1. One SAS cable for up to 4 internal hot plug HDDs if the the 6x 2.5" HDD + DVD Option is configured Second SAS cable is optional for port 5 and 6 if max 6 HD`s are required 2. Two SAS cables for up to 8 internal hot plug HDDs if the 8x 2.5" HDD Option is configured 3. Power cable Software: - ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates - Documentation engl. (multilingual on CD)
Mounting kits for PRIMERGY RX200 S5 - 1 pair of telescopic rails either full or partial extraction with partial extraction server can not be fully pulled out, but lower cost version of RMK - 1 Vario carrier DC-PC-3rd party Rack allows toolless adjustable in depth and easy mounting Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in depth from 704-790mm
Cables included in basic unit
Connections 1. SATA DVD 2. 4-port SAS cable HDDs 3. 4-port SAS cable HDDs 4. Power cable Conditions for SATA cable and one ore two 4-port SAS cables see description "Cables" above Cable PRIMERGY RX200 S5 ( optional ) ( optional ) Key: SAS SATA

7 of 26

B Base unit without CPU and Memory S26361-K1272-V101 Rack version for 19'' racks with 1 hot plug power supply module No Rack-mounting kit included For an orderable basic unit one CPU = first CPU, one memory = first memory as well as one of two possible rack-mount kit options has to be selected
Be aware of import restrictions! S26361-F3552-E1 TPM Module Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system S26361-F3552-L1 TPM Module add-on kit for later integration (loose delivery) Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system Only 1 TPM per system. Loose delivery for later integration possible for customer.

S26113-F539-E1 2nd redundant 770W PSU module for redundancy uses hot plug PSU slot max. 1x per system
For later redundancy upgrade the following kit is available: One 770W power supply module hot plug S26113-F539-L1 incl. power cord

8 of 26

S26361-F2735-E101 RMK-F1_1-2U Server telescopic rail, full extraction, 1-hand-mounting consisting of - 1 pair of full extraction telescopic rails with easy-mounting-clips - 1 bracket DC-PC-3rd-Rack 1x per system
S26361-F2735-E110 RMK-P_1-2U Server telescopic rail, partial extraction lower cost option consisting of - 1 pair of partial extraction telescopic rails with easy mounting clips - 1 bracket DC-PC-3rd-Rack 1x per system
S26361-F2735-E111 No Rackmount-Kit option Only for loose deliveries No mounting in Racks possible max. 1x per system
S26361-F2735-E8 Cable arm for 1U Server - for FSC Primecenter / Datacenter Racks - for 3rd Party racks 1x per system
D S26361-F2735-L101 S26361-F2735-L110 RMK_1U Server for loose delivery The low cost option has a partial extraction. Server could not completly pulled out of the Rack
PRIMERGY PRIMECENTER-rack
In case no cable arm is ordered, the Server must prevented to being pulled out the rack.
S26361-F1647-E302 Installation ex works for one server or subsystem. Hereby the rack will be delivered completely pre-mounted and all wired connections are tested. With racks 12U, 24U, 38U: Systems and components will be delivered installed in the rack With racks 46U: Systems and components will be delivered separately To be ordered only together with a PRIMERGY PRIMECENTER rack e.g.: S26361-K826-V10x refer configurator PC-Rack max. 1x per System "Rack-mounting ex factory" This service is to be ordered once per installable server/storage subsystem, in order to get the server/storage subsystem mounted into the PRIMERGY racks. In case of the 46 U PRIMERGY Rack, this service has to be ordered, to get the mounting kits and the cables installed. PRIMERGY 42/23U rack PRIMERGY Classic 19" rack is not supported S26361-F2735-L8 Cable arm for 1U Server for loose delivery

9 of 26

D Section

Processor

There are 2 processor LGA1366 sockets available. The first socket is always equipped with the first CPU It is also possible to upgrade a dual-processor system later on with a second CPU Max. DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz, with two quad rank DIMMs or each mix with quad rank DIMMs per channel = 800MHz The memory channel with the lowest speed defines the speed of all CPU channels in the system, also for the channels of the second CPU if configured. A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit One of following CPUs has to be selected as first CPU for an orderable basic unit Optional second CPU has to be the same type like the first CPU Dual-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) with passive heat sink, occupies socket for one CPU Xeon DP E5502 (1,86GHz/4M/4,8GT) / 80W Quad-Core CPU`s with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) and passive heat sink occupies socket for one CPU Xeon DP E5504 (2.00GHz/4M/4,8GT) / 80W Xeon DP E5506 (2.13GHz/4M/4,8GT) / 80W S26361-F3286-E186

Note: Max. DDR3 Bus Speed depends on:
- max. DDR3 Bus Speed from the CPU and - max. DDR3 Memory Speed and - max. memory modules on one memory channel
S26361-F3287-E200 S26361-F3287-E213
Turbo Quad-Core CPU`s with max. 1066MHz DDR3 speed ( 5.86GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon DP E5520 (2.26GHz/8M/5,86GT) / 80W S26361-F3288-E226 Xeon DP E5530 (2.40GHz/8M/5,86GT) / 80W S26361-F3288-E240 Xeon DP E5540 (2.53GHz/8M/5,86GT) / 80W S26361-F3288-E253 Turbo Quad-Core CPU`s with max. 1333MHz DDR3 speed ( 6.4GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon DP X5550 (2.66GHz/8M/6,4GT) / 95W S26361-F3289-E266 Xeon DP X5560 (2.80GHz/8M/6,4GT) / 95W S26361-F3289-E280 Xeon DP X5570 (2.93GHz/8M/6,4GT) / 95W S26361-F3289-E293 Low Voltage Quad-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) with passive heat sink occupies socket for one CPU Xeon LV DP L5506 (2,13GHz/4M/4,8GT) / 60W S26361-F3290-E213
Low Voltage Turbo Quad-Core CPU with max. 1066MHz DDR3 speed ( 5.86GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon LV DP L5520 (2,26GHz/8M/5,86GT) / 60W S26361-F3290-E226 Xeon LV DP L5530 (2,40GHz/8M/5,86GT) / 60W S26361-F3290-E240

10 of 26

E Section
- There are 6 memory slots for max. 48GB registered (reg) DDR3 RAM per CPU available with 8GB RDIMMs or max. 12GB unbuffered (ub) DDR3 RAM per CPU available with 2GB UDIMMs => max. 96GB registered or 24GB unbuffered RAM for two CPU`s possible ( For explanation of following terms refer to section "Memory Configurations" - The memory area is divided into 3 channels per CPU with 2 slots per channel - Slot 1 of each channel belongs to memory bank 1, the slot 2 belongs to memory bank 2 Registered and unbuffered memory modules can be selected No mix of registered and unbuffered modules allowed. DDRand 1333MHz modules can be mixed, but run always with the slower speed. With two DIMMs per channel only 1066MHz is possible independent of the module speed. SDDC (Chipkill) is supported only for registered memory modules. 1.) In the "Independent Channel Mode" is following configuration possible - Each slot can optionally be equipped either with registered x4 organized DDR3 modules: 2GB single rank, 4GB and 8GB dual rank, or with unbuffered x8 organized DDR3 modules: 1GB single rank and 2GB dual rank 2.) In the "Spare Channel Mode" is following configuration possible - Each memory bank can optionally be equipped with 3x2GB single rank, 3x4GB and 3x8GB dual rank DDR3 modules. Each slot of one bank has to be equipped with identical modules for spare channel mode In channel A and B of CPU 1 or channel D and E of CPU 2 are always the active memory modules, in channel C of CPU 1 and channel F of CPU 2 is always the spare module No special order codes with UDIMMs are offered for this mode 3.) In the "Mirrored Channel Mode" is following configuration possible - Each memory bank can optionally be equipped with 2x2GB single rank, 2x4GB and 2x8GB dual rank DDR3 modules. In each memory bank channel A and B of CPU 1 or channel D and E of CPU 2 have to be equipped with identical modules for mirrored channel mode. Channel C of CPU 1 and channel F of CPU 2 is not equipped In channel B is always the mirrored memory of channel A of CPU 1 In channel E is always the mirrored memory of channel D of CPU 2 No special order codes with UDIMMs are offered for this mode - For each CPU minimum 1 memory module has to be configured in Independent Channel Mode ( => Additional memory extensions can still be configured up to five times per CPU ) or one bank has to be equipped with two modules (channel A+B for CPU 1 or D+E for CPU 2) in Mirrored Channel Mode ( => Additional memory extensions can still be configured up to one time per CPU ) or one bank has to be equipped with three modules (channel A+B+C for CPU 1 or D+E+F for CPU 2) in Spare Channel Mode or Performance Mode ( => Additional memory extensions can still be configured up to one time per CPU )

11 of 26

For a description of memory configurations refer to section "Memory Configurations"
Minimum one memory module or memory order code per CPU = first memory Registered (reg) RDIMMs
For "Independent Channel Mode" usage!
- One DDR3-1066 PC3-8500 reg ECC memory module Note 1.) Max. DDR3 memory speed depends on the memory configuration of one CPU memory channel and on the speed of the CPU itself. The memory channel with the lowest speed defines the speed of all CPU channels in the system, also for the channels of the second CPU if configured. One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz,
Memory 2GB (single rank) Memory 4GB (dual rank) Memory 8GB (dual rank)
S26361-F3284-E513 S26361-F3284-E514 S26361-F3284-E515
Choose up to 6 order codes above per CPU.
6x for each CPU with max. 2 modules per channel

Registered (reg) RDIMMs

- One DDR3-1333 PC3-10600 reg ECC memory module
Note 2.) Max. DDR3 memory speed 1333MHz is only possible with CPU`s X5550, X5560 and X5570
S26361-F3285-E513 S26361-F3285-E514 S26361-F3285-E515
Unbuffered (ub) UDIMMs cannot be mixed with registered (reg ) RDIMMs Memory speed in all configurations with UDIMMs is max. 1066MHz depending on the used CPU speed

Unbuffered (ub) UDIMMs

6x for each CPU with max. 2 modules per channel - One DDR3-1066 PC3-8500 ub ECC memory module
Memory 1GB (single rank) S26361-F3970-E512 Memory 2GB (dual rank) S26361-F3970-E513 No Chipkill Choose up to 6 order codes above per CPU.

12 of 26

S26361-F3284-E1 Spare Channel Mode Installation With this order code a BIOS setup for spare mode is factory preinstalled The three identical memory modules of following order codes are always equipped in one memory bank to use the Spare Channel Mode In this mode only two modules are active the third module is the spare module
S26361-F3284-E2 Performance Mode Installation With this order code BIOS setup is default for highest performance The three identical memory modules of following order codes are always equipped in one memory bank to run with highest performance In this mode all three modules are active and full capacity can be used
SP = for "Spare Channel and Performance Mode" usage!
- Three DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory SP 6GB (3x 2GB single rank) S26361-F3284-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3284-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3284-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.

2x for each CPU with max. 2 modules per channel
- Three DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)
Memory SP 6GB (3x 2GB single rank) S26361-F3285-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3285-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3285-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.

13 of 26

S26361-F3284-E3 Mirrored Channel Mode Installation With this order code a BIOS setup for Mirrored Channel Mode is factory preinstalled The two identical memory modules of following order codes are always equipped in one memory bank to use the Mirrored Channel Mode In this mode only one module contains active data, the second modul contains the mirrored data
MM = for "Mirrored Channel Mode" usage!
- Two DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory MM 4GB (2x 2GB single rank) S26361-F3284-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3284-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3284-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.
- Two DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)
Memory MM 4GB (2x 2GB single rank) S26361-F3285-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3285-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3285-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.

H Section

Graphics
Graphics Controller integrated in iRMC S2 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)

14 of 26

Memory Configuration PRIMERGY RX200 S5
Each CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels. If you need more than 6 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below). There are 2 different kinds of DDR3 Memory Modules available: UDIMM and RDIMM. UDIMM and RDIMM offer different functionality. Application detect multi-bit errors offers max. flexibility, upgradeability, capacity use UDIMM modules for lowest cost Mirrored Channel Mode 2 identical Modules / Bank **) x offers maximum security Performance Mode *) 3 identical Modules / Bank **) x offers maximum performance and capacity Spare Channel Mode *) 3 identical Modules / Bank **) x balances security and capacity *) = Performance Mode and Spare Channel Mode use different BIOS settings. ( Spare Channel Mode as soon as released ) **) = technically possible but no Order Numbers available, use at your own risk x = order codes available Mode Configuration chip kill support any Independant Channel Mode 1, 2 or 3 Modules per Bank UDIMM n.a. x RDIMM yes x

Capacity Min. Memory per CPU Max. Memory per CPU Max. Memory per System Memory-Speed:
Configuration 1 Module / CPU 6 Modules / CPU 12 Modules / System
UDIMM RDIMM 1GB 2GB 12GB 48GB 24GB 96GB
Notes with one CPU with one CPU if second CPU is configured
Max. DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz, three DIMMs per channel = max. 800MHz, The memory channel with the lowest speed defines the speed of all CPU channels in the system,

Used CPU

Max. Memory-Bus speed depending on DIMMs / channel if following memory speed is used for specific CPU`s 1066MHz 1066MHz 1066MHz 1333MHz
( 1DIMM ) ( 2 DIMMs ) ( 3 DIMMs ) ( 1 DIMM )

1333MHz

( 2 DIMMs )

( 3 DIMMs )

Dual-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon DP E5502 (1,86GHz/4M/4,8GT) / 80W Quad-Core CPU`s with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon DP E5504 (2.00GHz/4M/4,8GT) / 80W Xeon DP E5506 (2.13GHz/4M/4,8GT) / 80W Turbo Quad-Core CPU`s with max. 1066MHz DDR3 speed ( 5.86GT/s) Xeon DP E5520 (2.26GHz/8M/5,86GT) / 80W Xeon DP E5540 (2.53GHz/8M/5,86GT) / 80W Turbo Quad-Core CPU`s with max. 1333MHz DDR3 speed ( 6.4GT/s) Xeon DP X5550 (2.66GHz/8M/6,4GT) / 95W Xeon DP X5570 (2.93GHz/8M/6,4GT) / 95W Low Voltage Quad-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon LV DP L5506 (2,13GHz/4M/4,8GT) / 60W Low Voltage Turbo Quad-Core CPU with max. 1066MHz DDR3 speed ( 5.86GT/s) Xeon LV DP L5520 (2,26GHz/8M/5,86GT) / 60W

800 MHz

800 MHz 800 MHz

1066 MHz 1066 MHz

1333 MHz 1333 MHz

1066 MHz

Configuration hints: - The memory sockets on the systemboard offer a color coding: Bank I black sockets Bank II blue sockets ( or white latch ) - A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below) Bank I on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank II on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank I on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU Bank II on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU - See below (next page) for a detailed descriptions of the memory configuration supported.

15 of 26

1. Independent Channel Mode
Channel A Channel B Channel C Channel D Channel E Channel F required required if 2nd CPU is configured optional, same type in Bank per CPU optional, any type -------not used
Bank I Data (black sockets) Bank II Data (blue sockets)

Data Data

1st XEON CPU (Dual-or Quad Core)
2nd XEON CPU (Dual-or Quad Core)
Independent Channel Mode allows all channels to be populated in any order Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system Independent Channel Mode is supported using UDIMM or RDIMM memory modules

2. Mirrored Channel Mode

Mirror Mirror

---------------

Mirrored Channel Mode requires identical modules on channel A and B (1st CPU) or channel D and E (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory channel C (1st CPU) or channel F (2nd CPU) are not usable in Mirrored Channel Mode Mirrored Channel Mode is supported using RDIMM memory modules
3. Performance Channel Mode
Performance Channel Mode requires identical modules on all channels of each Bank per CPU Performance Channel Mode is supported using RDIMM memory modules
4. Spare Channel Mode ( As soon as released )

Spare Spare

Spare Channel Mode requires identical modules on all channels of each Bank per CPU one third of the capacity is used for the spare => the available memory for applications is two thirds of the installed memory Spare Channel Mode is supported using RDIMM memory modules

16 of 26

Accessible drives
Setup RX200 S4 by ServerStart is supported with following configurations: no Floppy, no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in CD/DVD or USB CD/DVD, no Floppy disk drive: UNC Network share reachable or USB Floppy connected USB Floppy, no CD/DVD: USB CD/DVD connected
If installation is done locally, make sure you have external FDD available for driver installation.
Following USB Components are available 1) USB DVD+-RW: Super Multi DVD slim drive 2) FDD USB (external): external USB FDD 3) USB Keyboard: KBPC PX D, professional keyboard 4) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 5) USB Memorybird: MyUSB P910 8GB
S26391-F7119-L100 (USB cable included) S26391-F264-L226 (USB cable included) S26381-K340-V120 S26381-K415-L100

S26391-F6047-L208

S26361-F3531-E2 Blu-ray Combo slim SATA 6x BD-ROM, 16x DVD, 40x CD BD DL and all CD/DVD formats 0.5 x 5.25", black bezel max. 1x per system
S26361-F3269-E2 DVD-RW supermulti slim SATA all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 0.5 x 5.25", black bezel max. 1x per system
Configurations with CD /DVD are only possible with the 6x 2.5" HDD + DVD Option With onboard SATA controller are max. 4x SATA HD`s and one DVD possible. J Modular Disk Array + 6x 2.5" HD`s K Modular Disk Array + 8x 2.5" HD`s

17 of 26

J Section
Drive Bay for 6x 2.5" HD Basic Unit
S26361-F3317-E600 6x 2.5" HDD + DVD Option Drive Bay with up to 6x 2.5" slots plus one bay for DVD
With this 6x 2.5" HDD + DVD Option only 4 ports are electrically connected to e.g. a 4 port SAS controller or the on-board 4-port SATA Raid 0/1 controller. In order to connect HD5 and HD6 additionally, the UpgradeKit from 4 to 6 HD`s and a 8-port SAS controller is necessary
S26361-F3317-L500 8x 2.5" HDD Upgrade Option Upgrade to a Drive Bay with up to 8x 2.5" slots
Modular Raid 0/1, Raid5 for 4x 2.5" or 6x 2.5" SAS or SATA HD`s. On-board Controller for 4x 2.5" SATA HD`s
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1064 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 4 internal ports PCIe x4, 160mm without bracket max. 1x per system
Modular Raid 0/1 controller ( 1064 / 1068) with IME support for SAS-HDs IME (Integrated Mirroring Enhanced) offers the RAID levels 0, 1, 1E IME is a RAID 0, 1 implementation, whereby RAID 1 can operate an odd number of hard disks. Up to 4 hard disks including one hot spare HD are possible (limited by HHD slots in system). Windows 2003 as well as SUSE and RedHat Linux are supported The SAS IME solution supports 2 independent RAID volumes. There is no support of any external storage by this RAID solution.
UpgradeKit from 4 to 6 HD`s
S26361-F3257-E250 4-port SAS-cable for ports 5 and 6 necessary for max. 6 HD`s max. 1x per System For Raid 5 configurations with max. 4 HD`s no Upgradekit from 4 to 6 HD`s is necessary
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1068 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
SATA as son as released Modular Raid 5 controller for SAS/SATA-HDs
RAID levels 0, 1, 10, 5, 50, 6 and 60 are supported There is no support of any external storage by this RAID solution.

Base Units contain a 4-port on-board SATA controller supporting RAID Levels 0, 1
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 512MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
on-board 4-port SATA Raid 0/1 controller included in chipset Southbridge ICH10R
S26361-F3257-E155 Cache Battery Backup Unit with 55cm cable set max. 1x per System
Only one BBU per System possible, either for MegaRAID SAS 8880E or for MegaRAID SAS 1078 Upgrade option: S26361-F3257-L110

18 of 26

G-VIII
4x or 6x 2.5" SAS / SATA Hard disk drives
4x 2.5" SATA Hard disk drives
With onboard SATA controller up to 4x SATA HD`s or up to 4x SSD HD`s are possible No mix between SATA HD`s and SSD HD possible !
S26361-F3298-E32 SSD 32GB SATA 3Gb/s hot plug/hot replace tray max. 2x per base unit
S26361-F3298-E64 SSD 64GB SATA 3Gb/s hot plug/hot replace tray max. 2x per base unit
With 0/1/1E RAID Controller F3257-E4 & -E8 only Release with 5/6 RAID Contoller F3257-E256 -E512 will follow soon
With modular RAID controller - 1064 up to 4x 2.5" SAS or SATA hard disks can be configured. - 1068 up to 6x 2.5" SAS or SATA hard disks can be configured. No mix between SATA and SAS HD`s possible No mix between HD and SSD possible
No mix between SAS or SATA HD`s and SSD HD possible !
S26361-F3292-E173 HD 73GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 4x or 6x per base unit
S26361-F3292-E114 HD 146GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 4x or 6x per base unit
S26361-F3292-E130 HD 300GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 4x or 6x per base unit

4x or 6x

S26361-F3292-E573 HD 73GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 4x or 6x per base unit
S26361-F3292-E514 HD 146GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 4x or 6x per base unit

19 of 26

K Section
Drive Bay for 8x 2.5" HD Basic Unit
S26361-F3317-E500 8x 2.5" HDD Option Drive Bay with up to 8x 2.5" slots Section
Modular Raid 0/1 and Raid5 Controller for 8x 2.5" SAS or SATA HD`s
Modular Raid 0/1 controller with IME support for SAS-HDs IME (Integrated Mirroring Enhanced) offers the RAID levels 0, 1, 1E IME is a RAID 0, 1 implementation, whereby RAID 1 can operate an odd number of hard disks. Up to 4 hard disks including one hot spare HD are possible (limited by HHD slots in system). Windows 2003 as well as SUSE and RedHat Linux are supported The SAS IME solution supports 2 independent RAID volumes. There is no support of any external storage by this RAID solution.

Modular Raid 5 controller for SAS/SATA-HDs RAID levels 0, 1, 10, 5, 50, 6 and 60 are supported There is no support of any external storage by this RAID solution.
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 512MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system

20 of 26

H-VIII
8x 2.5" SAS / SATA Hard disk drives
With modular RAID controller up to 8x 2.5" SAS and / or SATA hard disks can be configured. No mix between SATA and SAS HD`s possible No mix between HD and SSD possible
S26361-F3297-E120 HD 120GB 5.4krpm 2.5" 5.400rpm,<10,5ms, 8MB Cache SATA hot plug/hot replace tray max. 8x per base unit
S26361-F3298-E32 SSD 32GB SATA 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3298-E64 SSD 64GB SATA 3Gb/s hot plug/hot replace tray max. 8x per base unit
With 0/1/1E RAID Controller F3257-E8 only Release with 5/6 RAID Contoller F3257-E256 -E512 will follow soon
S26361-F3292-E173 HD 73GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E114 HD 146GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E130 HD 300GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E573 HD 73GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E514 HD 146GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit

21 of 26

L Section
External SAS Disk Array, SAS backup drives or SCSI peripheral devices
External 4-port SAS-controller for external SAS Disk Array S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 without iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 with iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system Only one BBU per System possible, either for MegaRAID SAS 8880E or for MegaRAID SAS 1078 for loose delivery please order S26361-F3890-L501 Contr. w/o BBU S26361-F3890-L13 optional BBU

SAS-controller for

external backup drives
S26361-F3271-E201 SAS Controller 3Gb/s 8 port LP LSI SAS3442E-R Low Profile PCIe x4, int: 4 port ext: 4 port max. 2x per system

SCSI-controller for

external drives and peripheral devices Only released for SX10. All contr. for the connection of external storage systems are delivered without cables. For the configuration of external cabling see configurator
S26361-F3270-E201 SCSI U320 Controller Adaptec SCSI Card 29320LPE PCIe x1, int: LVD HD68 ext: VHDCI 68pin max. 2x per system

22 of 26

Fibre Channel
Fibre Channel Controller for external storage systems S26361-F3306-E201 4GBit/s FC Controller Emulex LPe1150, Low Profile bracket 1 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system S26361-F3306-E202 4GBit/s FC Controller Emulex LPe11002, Low Profile bracket 2 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system
S26361-F3483-E201 4GBit/s FC Controller Qlogic QLE2460, low profile bracket 1 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system S26361-F3483-E202 4GBit/s FC Controller Qlogic QLE2462, low profile bracket 2 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system
All controllers for the connection of external storage system are delivered without cables. For the configuration of external cabling see the configurator for external storage system. For Fibre Channel SAN also other componets like switches, SFPs and optical wires are orderable (for details see price liste)
S26361-F3961-E201 8GBit/s FC Controller Emulex LPe1250, low profile bracket 1 channel 8GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system
S26361-F3961-E202 8GBit/s FC Controller Emulex LPe12002, low profile bracket 2 channel 8GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system
A mix of differt controller types is not supported. e.g. LPe1250 and LPe12002 are same controller types and a combination is supported

23 of 26

N Section
Communication / Network 2x 1GBit on-board LAN Controller Gigabit Ethernet Controller on-board Dual Port GBit LAN controller Intel 82575EB (Zoar) * ext: for RJ 45-connector SW: AFT, VLAN, Fast Channel Teaming: Failover, Load Balancing The Intel LAN Controllers 1000TX and 1000SX can be used with the on-board controller in Teaming Mode.
* Supporting iSCSI boot (also diskless) by system BIOS and native iSCSI initiators 2 slots PCIe x8 ( wired x8 ) available A PCIe x1 or x4 card can also be plugged in a PCIe x8 slot

Changes
new SSD HD drives - as soon as available Spare Channel Mode Installation - now available Added E5530 and X5560 CPU First Release
S26361-F3299-E32/64 S26361-F3284-E1

26 of 26

SPEC CINT2006 Result
Copyright 2006-2009 Standard Performance Evaluation Corporation

Fujitsu

PRIMERGY RX200 S5, Intel Xeon E5502, 1.86 GHz
CPU2006 license: 19 Test sponsor: Fujitsu Tested by: Fujitsu Siemens Computers

SPECint_rate2006 =

SPECint_rate_base2006 = 66.2
Test date: Mar-2009 Hardware Availability: Apr-2009 Software Availability: Feb-2009
Copies 0 10.0 20.0 30.0 40.0 50.0 60.0 70.0 80.0 90.250
400.perlbench 401.bzip2 403.gcc 429.mcf 445.gobmk 456.hmmer 458.sjeng 462.libquantum 464.h264ref 471.omnetpp 473.astar 483.xalancbmk
66.0 40.6 37.5 62.8 99.1 58.8 54.5 52.5 71.6 56.6

60.91.2 85.8 259

50.7 43.8 38.2 76.3
SPECint_rate_base2006 = 66.2 SPECint_rate2006 = 71.3

Hardware

CPU Name: CPU Characteristics: CPU MHz: FPU: CPU(s) enabled: CPU(s) orderable: Primary Cache: Secondary Cache: L3 Cache: Other Cache: Memory: Disk Subsystem: Other Hardware: Intel Xeon EIntegrated 4 cores, 2 chips, 2 cores/chip 1,2 chips 32 KB I + 32 KB D on chip per core 256 KB I+D on chip per core 4 MB I+D on chip per chip None
48 GB (12x4 GB PC3-10600R, 2 rank, CL9-9-9, ECC)

Software

Operating System: Compiler: Auto Parallel: File System: System State: Base Pointers: Peak Pointers: Other Software:
SUSE Linux Enterprise Server 10 (x86_64) SP2, Kernel 2.6.16.60-0.21-smp Intel C++ Compiler 11.0 for Linux Build 20090131 Package ID: l_cproc_p_11.0.080
No ext3 Multi-User Run Level 3 32-bit 32/64-bit Microquill SmartHeap V8.1 Binutils 2.18.50.0.7.20080502
1 x SAS, 73 GB, 10000 RPM None
Standard Performance Evaluation Corporation info@spec.org http://www.spec.org/

Page 1

Results Table
Benchmark 400.perlbench 401.bzip2 403.gcc 429.mcf 445.gobmk 456.hmmer 458.sjeng 462.libquantum 464.h264ref 471.omnetpp 473.astar 483.xalancbmk Base Peak Copies Seconds Ratio Seconds Ratio Seconds Ratio Copies Seconds Ratio Seconds Ratio Seconds Ratio 55.56.56.602 64.66.66.362 37.4 62.8 98.9 54.5 52.6 56.85.8 50.8 38.2 76.37.5 62.9 99.1 54.3 52.5 56.85.6 50.7 38.2 76.37.5 61.9 99.8 54.6 52.5 56.85.8 50.7 38.3 76.362 40.3 62.8 98.9 58.8 71.6 60.91.2 50.8 43.8 76.40.6 62.9 99.1 58.8 71.6 60.91.1 50.7 43.8 76.40.6 61.9 99.8 58.6 71.5 60.91.3 50.7 43.9 76.3
Results appear in the order in which they were run. Bold underlined text indicates a median measurement.

Operating System Notes

ulimit -s unlimited was used to set the stacksize to unlimited prior to run

General Notes

For information about Fujitsu please visit: http://www.fujitsu.com

Base Compiler Invocation

C benchmarks: icc C++ benchmarks: icpc

Base Portability Flags

400.perlbench: -DSPEC_CPU_LINUX_IA32 462.libquantum: -DSPEC_CPU_LINUX 483.xalancbmk: -DSPEC_CPU_LINUX

Page 2

Base Optimization Flags
C benchmarks: -xSSE4.2 -ipo -O3 -no-prec-div -static -inline-calloc -opt-malloc-options=3 -opt-prefetch C++ benchmarks: -xSSE4.2 -ipo -O3 -no-prec-div -opt-prefetch -Wl,-z,muldefs -L/spec/cpu2006.1.1/lib -lsmartheap

Base Other Flags

C benchmarks: 403.gcc: -Dalloca=_alloca

Peak Compiler Invocation

C benchmarks (except as noted below): icc 401.bzip2: /opt/intel/Compiler/11.0/080/bin/intel64/icc 456.hmmer: /opt/intel/Compiler/11.0/080/bin/intel64/icc 458.sjeng: /opt/intel/Compiler/11.0/080/bin/intel64/icc C++ benchmarks (except as noted below): icpc 473.astar: /opt/intel/Compiler/11.0/080/bin/intel64/icpc

Peak Portability Flags

400.perlbench: -DSPEC_CPU_LINUX_IA32 401.bzip2: -DSPEC_CPU_LP64 456.hmmer: -DSPEC_CPU_LP64 458.sjeng: -DSPEC_CPU_LP64 462.libquantum: -DSPEC_CPU_LINUX 473.astar: -DSPEC_CPU_LP64 483.xalancbmk: -DSPEC_CPU_LINUX

Page 3

Peak Optimization Flags
C benchmarks: 400.perlbench: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -ansi-alias -opt-prefetch 401.bzip2: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -opt-prefetch -ansi-alias -auto-ilp32 403.gcc: basepeak = yes 429.mcf: basepeak = yes 445.gobmk: -xSSE4.2(pass 2) -prof-gen(pass 1) -prof-use(pass 2) -O2 -ipo -no-prec-div -ansi-alias 456.hmmer: -xSSE4.2 -ipo -O3 -no-prec-div -static -unroll2 -ansi-alias -auto-ilp32 458.sjeng: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -unroll4 -auto-ilp32 462.libquantum: -xSSE4.2 -ipo -O3 -no-prec-div -static -opt-malloc-options=3 -opt-prefetch 464.h264ref: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -static(pass 2) -prof-use(pass 2) -unroll2 -ansi-alias C++ benchmarks: 471.omnetpp: basepeak = yes 473.astar: -xSSE4.2(pass 2) -prof-gen(pass 1) -ipo(pass 2) -O3(pass 2) -no-prec-div(pass 2) -prof-use(pass 2) -ansi-alias -opt-ra-region-strategy=routine -auto-ilp32 -Wl,-z,muldefs -L/spec/cpu2006.1.1/lib -lsmartheap64 483.xalancbmk: basepeak = yes

Peak Other Flags

Same as Base Other Flags

Page 4

The flags file that was used to format this result can be browsed at http://www.spec.org/cpu2006/flags/Intel-ic11.0-int-linux64-revA.20090710.02.html
You can also download the XML flags source by saving the following link: http://www.spec.org/cpu2006/flags/Intel-ic11.0-int-linux64-revA.20090710.02.xml
SPEC and SPECint are registered trademarks of the Standard Performance Evaluation Corporation. All other brand and product names appearing in this result are trademarks or registered trademarks of their respective holders. For questions about this result, please contact the tester. For other inquiries, please contact webmaster@spec.org. Tested with SPEC CPU2006 v1.1. Report generated on Mon Jul 13 12:09:by SPEC CPU2006 PS/PDF formatter v6323.
Standard Performance Evaluation Corporation info@spec.org http://www.spec.org/ Page 5