PRIMERGY TX200 S5

System configurator and order-information guide December 2009

Contents

Instructions Configuration diagram Configurator
0 I II III IV V VI VII VIII IX X XI XII XIII System software Basic unit Processor Memory Graphics Accessible drives Hard disk drives External SAS or SCSI Disk Array Internal Disk Array Fiberchannel Communication/Network System Management Products (RemoteView) Miscellaneous Country specific power cord

Change report

PRIMERGY Server
System configurator and order-information guide PRIMERGY TX200 S5 Status 2009-11-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system via PC-/System-Architect Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system. You can configure your individual PRIMERGY server in order to adjust your specific requirements. The System configurator is divided into several chapters that are identical to the current price list and PC-/System-Architect. Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section

Memory, example
There are X memory slots which can be equipped with XXX MB It is permissible to make up to X passes through the memory upgrade options
S26361-XXX-XXX Memory XXX MB X times max. X times per system
S26361-XXX-XXX Memory XXX MB

max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates.
Please note that there are information symbols which indicate necessary information.
Further information in the internet see: http://ts.fujitsu.com/products/standard_servers/index.html (internet) (extranet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
Prices and availability see price list and PC-/System-Architect. Subject to change and errors excepted.
Fujitsu Siemens Computers Enterprise Products PRIMERGY Server

2 of 29

Configuration diagram PRIMERGY TX200 S5 SATA LFF (3.5") System Unit
System unit ( I ) SIDE VIEW red. Fan / PSU Kit red. Sys. Fans upgrade standard Power Supply 3 x HH 5.25" free or 2 x HH 5,25" free + Option A FRONT VIEW

1. PSU

5.25" Slim Line 2. PSU (red. + hot plug) std. PSU + std. Fans or red. hp PSU + red. Fans Depending on Base Unit Processor ( II ) 5.25" x 1.6" 1st XEON CPU (Dual-or Quad Core) II / A I/A II / B I/B II / C I/C 2nd XEON CPU (Dual-or Quad Core) Accessible drives ( V ) II / D I/D II / E I/E II / F
Mounting Kit DVD(sl) + LSP/LSD: (Option A)
LSP/LSD Option 5.25" x 1.6"

System Fan 1

- support for SL (0.5") DVD Drive + LSP /LPD (Local Service Panel / Local Service Display) - occupies one 5.25" bay
Memory ( III ) each CPU offers 2 Banks ( I and II ) with 3 Channels each Channels D, E, F are only available if 2nd CPU is configured

6 PCI-Busses

Extension slots one DVD (slim line or standard) is mandatory SCSI Controller ( VII ) Disk Array ( VIII ) Communication/Network ( IX ) Miscellaneous ( X ) Hard disk drives ( VI )
Slot 6 ( 3,3V ): PCIe x8 (wired x4), short

LP ready

System Fan 2
3.5"x1" SATA 4x 3,5" HDD Frame
Slot 5 ( 3,3V ): PCIe x8, long 3.5"x1" SATA

LP ready,

Slot 4 (3,3V) PCIe x8 long, notched possible to plug x16 cards

3.5"x1" SATA

Slot 3 ( 5V ): PCI 32-Bit / 33MHz, long
3.5"x1" SATA 2.) Slot 2 ( 3,3V ): PCIe x8 (wired x4), long
Slot 1 ( 3,3V ): PCIe x8 (wired x4), short

Key: Included in basic unit Option
A PCIe x16 card can be plugged in the notched slot 4 A PCIe x4 card can also be plugged in a PCIe x8 slot A PCIe x8 card can also be plugged in a PCIe x8 (wired x4) slot PCI and PCI-X slots are mechanically not compatible to PCIe slots!

3 of 29

Configuration diagram PRIMERGY TX200 S5 SAS LFF (3.5") System Unit
System unit ( I ) SIDE VIEW red. Fan / PSU Kit red. Sys. Fans upgrade standard Power Supply 3 x HH 5.25" free or 2 x HH 5,25" free + Option A or 1 x HH 5.25" free + Option C 5.25" Slim Line std. PSU + std. Fans or red. hp PSU + red. Fans Depending on Base Unit Processor ( II ) 1st XEON CPU (Dual-or Quad Core) II / A I/A II / B I/B II / C I/C 2nd XEON CPU (Dual-or Quad Core) II / D I/D II / E I/E II / F I/F LSP/LSD Option 5.25" x 1.6" LSP/LSD Option 5.25" Slim Line 3.5"x1" SAS/SATA 3.5"x1" SAS/SATA 5.25" x 1.6" FRONT VIEW

2. PSU (red. + hot plug)

5.25" x 1.6"

Accessible drives ( V )

MtK DVD(sl)+LSP/LSD+SAS LFF HDD: (Option C)
- support for + 2x 3.5" SAS HDD hot plug + SL (0.5") DVD Drive + LSP / LSD (Local Service Panel / Local Service Display)
3.5"x1" SAS/SATA 4x 3,5" HDD Frame
Slot 5 ( 3,3V ): PCIe x8, long 3.5"x1" SAS/SATA
Slot 4 (3,3V) PCIe x8 long, notched LP ready, possible to plug x16 cards
3.5"x1" SAS/SATA
3.5"x1" SAS/SATA 2.) Slot 2 ( 3,3V ): PCIe x8 (wired x4), long

4 of 29

Configuration diagram PRIMERGY TX200 S5 SAS SFF (2.5") System Unit
System unit ( I ) SIDE VIEW red. Fan / PSU Kit red. Sys. Fans upgrade standard Power Supply 3 x HH 5.25" free or 2 x HH 5.25" free + Option A or 1 x HH 5.25" free + Option D or 0 x HH 5.25" free + Option A + Option D 5.25" Slim Line 2. PSU (red. + hot plug) std. PSU + std. Fans or red. hp PSU + red. Fans Depending on Base Unit Processor ( II ) 5.25" x 1.6" System Fan 1 1st XEON CPU (Dual-or Quad Core) II / A I/A II / B I/B II / C I/C 2nd XEON CPU (Dual-or Quad Core) II / D I/D II / E I/E II / F

FRONT VIEW

5.25" x 1.6" or 5.25" Slim Line plus LSP/LSD Option
2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA 2.5" SAS/SATA
optional SFF SAS HDD extension Box: (Option D)
- support for 8x 2.5" (SFF) SAS or SATA HDD hot plug - occupies two 5.25" bays

Slot 5 ( 3,3V ): PCIe x8, long 8x SFF HDD Frame 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 2.5" (SFF) SAS/SATA 5 of 29
LP ready, possible to plug x16 cards
Slot 4 (3,3V) PCIe x8 long, notched
Slot 2 ( 3,3V ): PCIe x8 (wired x4), long
Start PRIMERGY TX200 S5 SW - Configurator 32 bit
with OEM-Software for PRIMERGY Server Usage of OEM SW from MS is not possible under VMware
without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately. Exception: VMware SW
VMware-Software - VCMS VirtualCenter Management Server - Virtual Infrastructure 3
For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: W **) - Small Business Server 2003 - Windows Server 2003 R2, Standard Edition Enterprise Edition ! Web Edition, SP2/English
PRIMECLUSTER *) - Clustering - Load Balancing
Linux - Software **) - Open Enterprise Server ***) - SuSE Linux ES (OEM): LO - SuSE Linux ES (Support): LS - Red Hat EL (OEM): LO - Red Hat EL (Support): LS
CITRIX-Software for Windows: W-MF - Multiuser SW MetaFrame LoadBalancing Additional User Lizenzen
MultiPath, Duplex Data Manager (DDM) W2K; W2K3 Linux (W-DDM)
Manageability Software: V**) - RemoteDeploy (as soon as available) - Altiris Server Deployment - iRMC advanced pack - RemoteView Software
Details eg. version numbers are published in the separate SW-Configurator
***) Supply over distribution or procurement from FSC VP BC Software
They find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users: for partners:
Continue with PRIMERGY HW configurator

6 of 29

Start PRIMERGY TX200 S5 SW Configurator EM64T / IA64
with OEM-Software for PRIMERGY Server
Usage of OEM SW from MS is not possible under VMware
For all SW products listed below please refer to the corresponding software configurator accessible via the Extranet under "PC Configurations, Configurator for PRIMERGY SW", URL see below.

only EM64T

Microsoft - Software: W - Windows Server 2003 R2, Standard x64 Edition Enterprise x64 Edition
Linux - Software *) **) only - SuSE Linux ES (OEM): LO x86_64 - SuSE Linux ES (Support): LS - Red Hat EL (OEM): LO - Red Hat EL (Support): LS
CITRIX-Software for only Windows: W-MF EM64T - Presentation Server LoadBalancing Additional User Licences
MultiPath, Duplex Data Manager (DDM) Linux (W-DDM)

Details eg. version numbers are published in the separate SW-Configurator Manageability Software: V**) only - RemoteDeploy (as soon as available) EM64T - iRMC advanced pack - RemoteView Software
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

7 of 29

Start PRIMERGY TX200 S5 Section

Basic unit

System unit, Rack and Floorstand, including:
* Two lockable front covers in floorstand version
Door #1 for accessible drive bays Door #2 for hot plug HDD bays Both doors may be locked or door #1 may be left open while door #2 is still locked
* backplane with 4 (LFF) or 8 (SFF) bays for hot-plug HD's. Type depending on base unit:
Type 1: 4x hot plug LFF (3.5") SAS/SATA HDD (SAS/SATA LFF base units only) Type 2: 8x (2x4) hot plug SFF (2.5") SAS HDD (SAS SFF base units only)
* PSU and Fan Type depending on base unit:
Type 1: standard PSU and standard Fans (2 System Fans)
(V101and V301 base units only)
Type 2: hot plug redundant PSU and redundant Fans (2 dual-fin System Fans)
(V201, V401, V601 and V801 base units only)
for Type 1 base units there is an upgrade to hot plug redundant PSU and redundant Fans available
* 3 bays 5.25" for accessible drives (half Hight) Systemboard D2709 with: * Up to two Xeon Dual Core, Quad-Core or Turbo Quad Core CPU`s ( Nehalem-EP, LGA 1366 socket ) with serial QPI links ( Quick Path Interconnect ) and three memory channels per CPU First CPU has to be selected for an orderable basic unit, * Chipset Intel 5500 (codenamed Tylersburg-24D = Tylersburg-EN) * 6 PCI slots: 3x PCIe x8 (wired x4), 1x long 2x PCIe x8, 2x long, 1x notched, possible to plug a x16 card 1x 32Bit / PCI 33MHz, long ( 5V ) * 6 memory slots for max. 32GB with 4 x 8GB registered DDR3 RAM for Lynnfield CPU only or max. 12GB with 2GB unbuffered DDR3 RAM for Lynnfield and Havendale CPU available - Memory is divided into 6 DIMMs( 3 channels with 2 slots per channel ) - Max. two registered modules or two unbuffered modules are possible per channel - No mix of registered and unbuffered modules is allowed - First Memory ( one module ) has to be selected for an orderable basic unit per CPU - Memory upgrade is possible module wise for the Independent Channel Mode or for the Performance Mode, - Memory mirrroring is supported with 2 identical modules in channel A+B CPU 1 or D+E CPU 2 - Hot Spare Memory is supported with 3 identical modules in channel A+B+C CPU 1 or D+E+F CPU 2 - SDDC (Chipkill) is supported only for registered memory modules, * 6-port SATA controller on-board included in Intel Southbridge ICH10R for SATA Raid0/1, Max. 4 SATA HD`s are supported Max. 2 SATA accessible drives are supported (DVD, Backup) * 1 Gbit Ethernet LAN on board ( Intel Hartwell ) with ToE; iSCSI boot integrated in System BIOS as selectable option (as soon as available) * iRMC S2 (integrated Remote Management Controller) on-board server management controller with dedicated 10/100 Service LAN-port and integrated graphics controller ( max. Resolution: 1600 x 1200 at 16 bpp) The Service LAN-port can be switched alternatively on standard Gbit LAN port Interfaces: * 1x RS-232-C (serial, 9pin) (usable for BMC or OS or shared) * 1x optional RS-232-C (serial, 9-pin) - occupies otherwise unused 7th PCI-slot * 1x VGA (15 pin) * 10x USB 2.0 ( UHCI ) with 480MBit/s (4x external at the rear, 3x external at the frontside, 2x released internal USB Interfaces for backup devices, 1x internal for Memorystick or Dongle, no USB wakeup) * 1x LAN RJ45, 1x Service-LAN RJ45 *internal Cables: 1. SATA cable for CD/DVD. 2. Cable for HDD Backplane 3. USB cable (if USB Backup is used) * USB mouse (floorstand version only) * ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates * Documentation engl. (multilingual on CD)

8 of 29

Floorstand-version Basic unit without CPU and Memory
Rack-version Basic unit without CPU and Memory Including 1 power cord with inlet connector for non-heating apparatus - Minimum one CPU / Memory module has to be selected via CPU / Memory order codes ** mounting kit not included choose installation ex works (see below) SAS/SATA LFF (3.5") Rack-version with: - 4-port SAS backplane for 4 hot plug LFF (3.5") SAS/SATA HDDs incl. cables for connection to the onboard SATA or plug in SAS controller SAS SFF (2.5") Rack-version with: - 2x4-port SAS backplane for 8 hot plug SFF (2.5") SAS HDDs incl. cables for connection to the plug in SAS controller - SAS/SATA LFF (3.5") Base Unit w/ hot plug PSU and red. Fans S26361-K1266-V601 - SAS SFF (2.5") Base Unit w/ hot plug PSU and red. Fans S26361-K1266-V801
- Minimum one CPU / Memory module has to be selected via CPU / Memory order codes - Mouse with two pushbuttons
SAS/SATA LFF (3.5") Floorstand-version with: - 4-port SAS backplane for 4 hot plug LFF (3.5") SAS/SATA HDDs incl. cables for connection to the onboard SATA or plug in SAS controller SAS SFF (2.5") Floorstand-version with: - 2x4-port SAS backplane for 8 hot plug SFF (2.5") SAS HDDs incl. cables for connection to the plug in SAS controller - SAS/SATA LFF (3.5") Base Unit w/ std. PSU S26361-K1266-V101 - SAS/SATA LFF (3.5") Base Unit w/ hot plug PSU and red. Fans S26361-K1266-V201 - SAS SFF (2.5") Base Unit w/ std. PSU S26361-K1266-V301 - SAS SFF (2.5") Base Unit w/ hot plug PSU and red. Fans S26361-K1266-V401
** Rack mounting kit consists of: - 1 pair of patented telescopic sliding rails (704-790mm) - 1 sliding drawer for system unit (5U) Allows easy mounting and tool less adjustable in depth - 1 support bracket PC-Rack - 1 cable management PC-racks The mounting kit, orderd in addition, allows for the mounting into a PRIMERGY PRIMECENTER- and DataCenter-rack with 12, 24, 38 or 46U (height units).
The LFF Base Units offer onboard SATA functionality for up to 4 HDD. An additional SAS controller is required if you need support for SAS HDD.
S26361-F3552-E1 TPM Module Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system
Only 1 TPM per system. Loose delivery for later integration possible. for customer
S26361-F3552-L1 TPM Module add-on kit for later integration (loose delivery) Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system

9 of 29

as soon as available
S26361-F2735-E111 No Rackmount-Kit option Only for loose deliveries No mounting in Racks possible max. 1x per system
S26361-F2735-E202 RMK-F2_3-xU-Servers_13mm-Drop-in Rails RMK for rack installation ex work only sliding drawer, full extraction, cable mgmt. consisting of - 1 sliding drawer for system unit (5U) 1x per system

S26113-F541-E10 2nd power supply 800W (hot plug) for redundancy occupies one bay for hot plug power supply max. 1x per system
Base Units with hot plug PSU only
(V201, V401, V601 and V801)

floorstand versions only

(V201 and V401) A second, redundant power supply requires an additional country specific power cord (section XIII)
Fan and PSU upgrade kit: Conversion from standard into hot plug PS (incl. 1 PS module) Upgrade of standard into redundant fans 1 power supply module 800W hot plug: Supplementary module

S26113-F541-L11

S26113-F541-L10
Processor There are 2 processor LGA771 sockets available. The first socket is always equipped with the first CPU which can be selected via configurator It is also possible to upgrade a dual-processor system later on with a second CPU Two processors with different clock frequencies are not possible A multi-processor operating system is required for a dual-processor system.
Max. two CPU`s can be selected per basic unit One of following CPUs has to be selected as first CPU for an orderable basic unit Optional second CPU has to be the same type like the first CPU Dual-Core CPU with max. DDR3 Bus Speed 800MHz - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon DP E5502 (1,86GHz/4M/4,8GT) / 80W Quad-Core CPU`s with max. DDR3 Bus Speed 800MHz - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon DP E5504 (2.00GHz/4M/4,8GT) / 80W Xeon DP E5506 (2.13GHz/4M/4,8GT) / 80W

S26361-F3277-E186

S26361-F3278-E200 S26361-F3278-E213
Turbo Quad-Core CPU`s with max. DDR3 Bus Speed 1066MHz - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon DP E5520 (2.26GHz/8M/5,86GT) / 80W S26361-F3279-E226 Xeon DP E5530 (2.40GHz/8M/5,86GT) / 80W S26361-F3279-E240 Xeon DP E5540 (2.53GHz/8M/5,86GT) / 80W S26361-F3279-E253 Turbo Quad-Core CPU`s with max. DDR3 Bus Speed 1333MHz - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon DP X5550 (2.66GHz/8M/6,4GT) / 95W S26361-F3280-E267 Xeon DP X5560 (2.80GHz/8M/6,4GT) / 95W S26361-F3280-E280 Xeon DP X5570 (2.93GHz/8M/6,4GT) / 95W S26361-F3280-E293 Low Voltage Quad-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon LV DP L5506 (2,13GHz/4M/4,8GT) / 60W S26361-F3281-E213 Low Voltage Turbo Quad-Core CPU`s with max. DDR3 Bus Speed 1066MHz - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink Frontside Bus with 1066 or 1333MHz occupies socket for one CPU Xeon LV DP L5520 (2,26GHz/8M/5,86GT) / 60W S26361-F3281-E226 Xeon LV DP L5530 (2,40GHz/8M/5,86GT) / 60W S26361-F3281-E240 D

12 of 29

DDR3-1333 PC3-10600 reg ECC memory module = as soon as available Minimum one memory module or memory order code per CPU = first memory Registered (reg) RDIMMs
For "Independent Channel Mode" usage!
- One DDR3-1066 PC3-8500 reg ECC memory module Note 1.) Max. DDR3 memory speed depends on the memory configuration of one CPU memory channel and on the speed of the CPU itself. The memory channel with the lowest speed defines the speed of all CPU channels in the system, also for the channels of the second CPU if configured. One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz,
Memory 2GB (single rank) Memory 4GB (dual rank) Memory 8GB (dual rank)
S26361-F3284-E513 S26361-F3284-E514 S26361-F3284-E515
Choose up to 6 order codes above per CPU.

6x for each CPU

Registered (reg) RDIMMs
- One DDR3-1333 PC3-10600 reg ECC memory module
Note 2.) Max. DDR3 memory speed 1333MHz is only possible with CPU`s X5550, X5560 and X5570
S26361-F3285-E513 S26361-F3285-E514 S26361-F3285-E515
Unbuffered (ub) UDIMMs cannot be mixed with registered (reg ) RDIMMs Memory speed in all configurations with UDIMMs is max. 1066MHz depending on the used CPU speed

Unbuffered (ub) UDIMMs

6x for each CPU with max. 2 modules per channel - One DDR3-1066 PC3-8500 ub ECC memory module
Memory 1GB (single rank) S26361-F3970-E512 Memory 2GB (dual rank) S26361-F3970-E513 No Chipkill Choose up to 6 order codes above per CPU.

13 of 29

S26361-F3284-E1 Spare Channel Mode Installation With this order code a BIOS setup for spare mode is factory preinstalled The three identical memory modules of following order codes are always equipped in one memory bank to use the Spare Channel Mode In this mode only two modules are active the third module is the spare module
S26361-F3284-E2 Performance Mode Installation With this order code BIOS setup is default for highest performance The three identical memory modules of following order codes are always equipped in one memory bank to run with highest performance In this mode all three modules are active and full capacity can be used

SP = for "Spare Channel and Performance Mode" usage!
- Three DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory SP 6GB (3x 2GB single rank) S26361-F3284-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3284-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3284-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.
2x for each CPU with max. 3 modules per channel
- Three DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)
Memory SP 6GB (3x 2GB single rank) S26361-F3285-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3285-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3285-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.

14 of 29

S26361-F3284-E3 Mirrored Channel Mode Installation With this order code a BIOS setup for Mirrored Channel Mode is factory preinstalled The two identical memory modules of following order codes are always equipped in one memory bank to use the Mirrored Channel Mode In this mode only one module contains active data, the second modul contains the mirrored data
MM = for "Mirrored Channel Mode" usage!
- Two DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory MM 4GB (2x 2GB single rank) S26361-F3284-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3284-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3284-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.
2x for each CPU with max. 2 modules per channel

- Two DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)
Memory MM 4GB (2x 2GB single rank) S26361-F3285-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3285-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3285-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.

15 of 29

Memory Configuration PRIMERGY TX200 S5
Each CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels. If you need more than 6 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below). There are 2 different kinds of DDR3 Memory Modules available: UDIMM and RDIMM. UDIMM and RDIMM offer different functionality. Mode Configuration UDIMM RDIMM chip kill support any n.a. yes Independant Channel Mode 1, 2 or 3 Modules per Bank x x Mirrored Channel Mode 2 identical Modules / Bank **) x Performance Mode *) 3 identical Modules / Bank **) x Spare Channel Mode *) 3 identical Modules / Bank **) x *) = Performance Mode and Spare mode use different BIOS settings. **) =released, but no Order Numbers available yet x = order codes available Configuration hints: - The memory sockets on the systemboard offer a color coding: Bank I black sockets Bank II blue sockets - A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below) Bank I on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank II on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank I on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU Bank II on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU - See below (next page) for a detailed descriptions of the memory configuration supported. Application detect multi-bit errors offers max. flexibility, upgradeability, capacity use UDIMM modules for lowest cost offers maximum security offers maximum performance and capacity balances security and capacity

16 of 29

1. Independent Channel Mode
Channel A Channel B Channel C Channel D Channel E Channel F required required if 2nd CPU is configured optional, same type in Bank per CPU optional, any type -------not used
Bank I Data Data Data (black sockets) Bank II Data Data Data (blue sockets) 1st XEON CPU (Dual-or Quad Core)

S26361-F2826-E204 Mounting Kit DVD(sl) + LSP/LSD Occupies one 5.25" x 1.6" bays in the accessible bay area Offers bays for: - 1x LSP/LSD option - 1x 0.5 * 5.25" SATA DVD max. 1x per system
S26361-F2826-E104 Mounting Kit DVD(sl) + LSP/LSD + SAS LFF HDD Occ. two 5.25" x 1.6" bays in the accessible bay area Offers bays for: - 1x LSD/LSP option - 1x 0.5 * 5.25" SATA DVD - 2x 1 * 3.5" SAS/SATA HD`s One 0.5 * 3.5" satin black bezel for LSD/LSP bay One 0.5 * 5.25" satin black bezel for 0.5 * 5.25" DVD bay Two 1 * 3,25" satin black bezels for SAS HDD bays max. 1 per system To be used in SAS LFF (3.5") Base Unit only For SATA HDD an add. SAS controller necessary
S26361-F2557-E202 Local Service Panel incl. ad. Customer Self Service LSP module incl. adapter 0.5" x 5.25" max. 1x per System
S26361-F2557-E105 Local Service Display incl. ad. Customer Self Service LSD module incl. adapter 0.5" x 5.25" max. 1x per System
see Conf. diagram Option C
S26361-F2557-E205 Local Service Panel incl. mount. kit Customer Self Service LSP module incl. mounting kit 0.5" x 5.25" max. 1x per system
S26361-F2557-E106 Local Service Display incl. mount. kit Customer Self Service LSD module incl. mounting kit 0.5" x 5.25" max. 1x per system
see Conf. diagram Option A
S26361-F3531-E2 Blu-ray Combo slim SATA 6x BD-ROM, 16x DVD, 40x CD BD DL and all CD/DVD formats 0.5 x 5.25", black bezel max. 1x per system
S26361-F3269-E2 DVD-RW supermulti slim SATA all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 0.5 x 5.25", black bezel max. 1x per system
S26361-F3266-E2 DVD-ROM HH SATA 16x DVD 48x CD 1.6 x 5.25", black bezel max. 1x per system
S26361-F3267-E2 DVD-RW supermulti HH SATA all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 1.6 x 5.25", black bezel max. 1x per system
S26361-F3530-E2 Blu-ray Combo HH SATA 6x BD-ROM, 16x DVD, 40x CD BD DL and all CD/DVD formats 1.6 x 5.25", black bezel max. 1x per system
If installation is done locally, make sure you have internal or external FDD available for driver installation. Following USB Components are available 1) USB DVD: External SuperMulti Drive (USB cable included) 2) USB FDD: External USB FDD (USB cable included) 3) USB Keyboard: KBPC PX D, professional keyboard 4) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 5) USB Memorybird: 4GB G1
S26341-F103-L82 S26391-F264-L226 S26381-K340-V120 S26381-K415-L100 S26391-F6047-L104

18 of 29

S26361-F2826-E114 SFF (2.5") HDD-Box for additional 8x SFF (2.5") SAS hard disks Occupies 2x 1.6" bays in the accessible bay area 3.2 * 5.25", satin black bezel max. 1x per system Raid 0/1 controller S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1068 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 1x per system Raid 5 controller S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket 1x per Extension box

S26361-F3297-E160 HD 160GB 5.4krpm 2.5" 5.400rpm,<10,5ms, 8MB Cache SATA hot plug/hot replace tray max. 8x or 16x per base unit
S26361-F3297-E320 HD 320GB 5.4krpm 2.5" 5.400rpm,<10,5ms, 8MB Cache SATA hot plug/hot replace tray max. 8x or 16x per base unit

22 of 29

J Section

External SAS Disk Array

SAS RAID controller for JBOD subsystems (SX40) / FibreCAT SXxx (SAS SFF JBOD) S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 without iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 with iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system
iBBU or BBU max 2x per system possible for loose delivery please order S26361-F3890-L501 Contr. w/o BBU S26361-F3890-L13 optional BBU

SAS-controller for

external backup drives
S26361-F3271-E1 SAS Controller 3Gb/s 8 port LP LSI SAS3442E-R PCIe x4, int: 4 port ext: 4 port max. 2x per system

23 of 29

K Section

internal Disk Array

SATA Configuration SATA Base Units contain a 6-port on-board SATA controller supporting RAID Levels 0, 1, 10 RAID 5 requires an additional Controller
optional RAID 5-Controller for 1 to 4 LFF (3.5") SATA HDD S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 1x per system S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 512MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 1x per system
S26361-F3257-E155 Cache Battery Backup Unit max. 1x per Controller
iBBU or BBU max 2x per system possible
for loose delivery please order S26361-F3257-L110

SAS Configuration

you can choose between two type of 8 port SAS controller for the Base Unit: - LSI 1068e based Modular RAID 0,1 (IME) - LSI 1078 based Modular RAID 5,6 if you want to use SAS harddisks one Controller is required Controller for 1 to 8 LFF (3.5") or SFF (2.5") SAS HDD S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1068 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 2x per system S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 2x per system S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 512MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm with combi bracket max. 2x per system

S26361-F3120-E3 Serial Port Option RS-232-C Cable with 9-pin plug for a 2nd RS-232-C Serial Port Interface occupies PCI slot max. 1x per system
In TX200 S5 the PCI-Slot used by this option is an otherwise unused Slot. All 6 Slots remain available.

26 of 29

System Management Produkts (RemoteView)
S26361-F1790-E241 iRMC2 advanced pack integrated remote management controller activation key for graphical console redirection and remote media redirection max. 1x per system
S26361-F1790-E221 RemoteView Software V5.0 Installation and configuration of RemoteView Web and LAN FrontEnd BMC-Manager, RTDS and FreeDOS Online manuals

Miscellaneous

27 of 29

O Section

Country specific power cord
A power cord has to be ordered for country specific floorstand versions: - once per basic unit and additional a second power cord - if an additional hot plug, redundant power supply modul is ordered
PRIMERGY TX200 S5 Floorstand
PRIMERGY TX200 S5 19" Rack
Power cord for floorstand versions for following countries: 1.8m, grey T26139-Y1740-E10 T26139-Y1742-E10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR USA, Canada UK, IR Italy Denmark Option "no powercord", for Countries without specific cable orderable like e.g. China
T26139-Y1744-E10 T26139-Y1745-E10 T26139-Y1746-E10 T26139-Y3850-E10
Country specific power cords are not required for rack versions. Power cords are shipped in all rack versions with inlet connector for non-heating apparatus. (1x with Standard PSU, 2x with hot plug upgrade) T26139-Y1742-E10 USA, Canada For shipments to USA&Canada, you have to order one power cord (1,8m, grey) per power supply.
Option for floorstand USB keyboards for floorstand versions for following countries: USB standard keyboard KBPC SX USB professional Keyboard KB PC PX S26381-K398-E110 KBPC SX USB USA USA / international S26381-K340-E110 S26381-K398-E120 KBPC SX USB D Germany S26381-K340-E120 S26381-K398-E140 KBPC SX USB F France S26381-K340-E140 S26381-K398-E155 KBPC SX USB S FIN Sweden / Finland S26381-K340-E155 S26381-K398-E165 KBPC SX USB GB United Kingdom S26381-K340-E165 S26381-K398-E180 KBPC SX USB E Spain S26381-K340-E180 S26381-K398-E185 KBPC SX USB I Italy S26381-K340-E185
Power cord for optional monitor connection for the following countries: 1.8m, grey T26139-Y1740-L10 T26139-Y1742-L10 T26139-Y1744-L10 T26139-Y1745-L10 T26139-Y1746-L10 D, A, B, F, NL, FIN, N, S, E, P, RUS, TR US, CDN UK, IR Italy Denmark For connection of a monitor to the system an additional country specific power cord has to be ordered as option.

PRIMERGY RX200 S5
System configurator and order-information guide December 2009

Contents

4x or 6x 2.5" Hot-plug HDD or SSD
8x 2.5" Hot-plug HDD or SDD
Instructions Configuration diagram Configurator
0 I II III IV V G-VI G-VII G-VIII G-IX H-VI H-VII H-VIII X XI XII XIII XIV XV System software Basic unit Processor Memory Graphics Accessible drives Drive Bay for 6x 2.5" HD Basic Unit Modular Raid 0/1, Raid5 for 4x 2.5" or 6x 2.5" SAS or SATA HD or SSD. On-board Controller for 4x 2.5" SATA HD`s 4x or 6x 2.5" SAS / SATA Hard disk drives 4x 2.5" SATA HD or SSD Drive Bay for 8x 2.5" HD Basic Unit Modular Raid 0/1 and Raid5 Controller for 8x 2.5" SAS or SATA HD`s 8x 2.5" SAS / SATA HD or SSD External SAS Disk Array, SAS backup drives or SCSI peripheral devices Fibre-Channel controller Communication/Network System Management Products (RemoteView) Miscellaneous Country specific power cord

Change report

PRIMERGY Server
System configurator and order-information guide PRIMERGY RX200 S5 Status 2009-11-30

Instructions

This document contains basic product and configuration information that will enable you to configure your system via PC-/SystemArchitect.
Only these tools will ensure a fast and proper configuration of your PRIMERGY server or your complete PRIMERGY Rack system.
You can configure your individual PRIMERGY server in order to adjust your specific requirements.
The System configurator is divided into several chapters that are identical to the current price list and PC-/SystemArchitect.
Please follow the lines. If there is a junction, you can choose which way or component you would like to take. Go through the configurator by following the lines from the top to the bottom.

Section

Memory
There are X memory slots which can be equipped with XXX MB. It is permissible to make up to X passes through the memory upgrade options.
S26361-XXX-XXX Memory XXX MB X times max. X times per system
S26361-XXX-XXX Memory XXX MB

max. X times per system

In one chapter you can only select as many components (here 4x) as the arrow indicates.
Please note that there are information symbols which indicate necessary information.
For further information see: http://ts.fujitsu.com/products/standard_servers/index.html (internet) (extranet)
https://partners.ts.fujitsu.com/com/order-supply/configurators/primergy_config/current/Pages/default.aspx
Prices and availability see price list and PC-/SystemArchitect. Subject to change and errors excepted.
Fujitsu Technology Solutions x86 PRIMERGY Server

2 of 26

Configuration diagram PRIMERGY RX200 S5

System unit ( I )

board Memory CPU1 ( Channel A + B + C )
front side right side Xeon Dual-or Quad Core CPU incl. Heatsink
Bank 1 (3 Modules) Bank 2 (3 Modules)
Memory CPU2 ( Channel D + E + F )
Accessible drives ( V ) Bay for 5,25"x 0,5" SATA-DVD Only with option 6x 2.5" HD Hard disk drives ( VI )
Xeon Dual-or Quad Core CPU incl. Heatsink
Bank 1 (3 Modules) Bank 2 (3 Modules) Memory III

rear side

Processor ( II )
Xeon Dual-or Quad Core CPU with 1066 or 1333 MHz Frontsidebus

Option 8x 2.5" HD

Option 6x 2.5" HD

incl. bay for DVD 2. PSU

Redundant power supply option

1. PSU

Double Fan
HD8 2.5"x1" SAS or SATA HD7 2.5"x1" SAS or SATA HD6
HD5 and HD6 are only connected internally through the configuration of the option " Upgradekit from 4 to 6 HD`s " and an 8-port RAID-controller

Redundant Fans

2.5"x1" SAS or SATA
SATA RAID 0/1 support on-board Extension slots for Disk Array ( G-VII and H-VII ) SAS and SCSI Controller ( X ) Fibre Channel Controller ( XI ) Communication/Network ( XII )
HDriser cards Slot 3: PCIe-2 x4 ( internal only ) For modular RAID-controller
Slot 2: PCIe-2 x8 (low profile, half length) ( 174mm incl. bracket )
HD1 Slot 1: PCIe-2 x8 (1x standard hight, half length) ( 174mm incl. bracket )
Key: Included in basic unit or = Option
One CPU ( first CPU ) and one memory ( first memory ) has to be selected for an orderable basic unit.

3 of 26

8x 2.5" HDD bays option or 6x 2.5" HDD bays option with SATA DVD option
Start PRIMERGY RX200 S5 SW Configurator 32 bit
with OEM-Software for PRIMERGY Server
without OEM-Software for PRIMERGY Server OEM-SW is bound to HW and is not allowed to be ordered separately. Exception: VMware SW
VMware-Software - VCMS VirtualCenter Management Server - Virtual Infrastructure 3

For all SW products please refer to the corresponding software configurator accessible via the Extranet under Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: W **) - Windows Server 2003 R2, Standard Edition Enterprise Edition ! Web Edition, SP2/English - Additional loose Client-Access-Licenses (CALs) (not for Web Edition)
PRIMECLUSTER *) - Clustering - Load Balancing
Linux - Software **) - Open Enterprise Server ***) - SuSe Linux ES (OEM) - SuSe Linux ES (support) - Red Hat EL (OEM): LO - Red Hat EL (Support): LS
DuplexDataManager & MultiPath W2K3; Linux (RedHat 4 / SLES 9)
Manageability Software: V**) - IRMC advanced Pack - RemoteDeploy - RemoteView SW - Altiris Server Deployment
Details eg. version numbers are published in the separate SW-Configurator
Backup-Software / Application-Software: U - ARCserve - openSM2 ***) Supply over distribution or procurement from FSC VP BC Software
They find single software configurators and release lists (OS-matrix / system management / security) under following addresses:
for internal users: for partners:
Continue with PRIMERGY HW configurator

4 of 26

Start PRIMERGY RX200 S5 SW Configurator EM64T
VMware-Software - VCMS VirtualCenter Management Server - Virtual Infrastructure 3 For all SW products please refer to the corresponding software configurator accessible via the Extranet under "Configuration & Tools, -All configurations, -Software, URL see below.
Microsoft - Software: W only EM64T - Windows Server 2003 R2, Standard x64 Edition Enterprise x64 Edition - Additional loose Client-Access-Lizenzen (CALs)
Linux - Software *) **) only - SuSe Linux ES (OEM) EM64T - SuSe Linux ES (support) - Red Hat EL (OEM): LO - Red Hat EL (Support): LS
only MultiPath, Duplex Data EM64T Manager (DDM) Windows, Linux (W-DDM)
Manageability Software: V**) - RemoteDeploy
EM64T - RemoteView SW - IRMC advanced Pack
You'll find single software configurators and release lists (OS-matrix / system management / security) under following addresses:

5 of 26

Start PRIMERGY RX200 S5

Basic unit

System unit consisting of: * 1U Housing including - hot plug Power supply unit with one 770W PSU module and power cord rack 4m length (can be upgraded with one additional PSU module) * Fans - Redundant and hot plug system fans (6x) * Drives / Bays - 6x 2.5" SAS / SATA HDD option or 8x 2.5" SAS / SATA HDD option ( Four bays are supported with the onboard SATA controller or with the 1064 modular RAID controller 6 or 8 bays are supported with the 1068 and 1078 modular RAID controllers. ) - 1 bay SATA DVD-ROM 0,5" height (option) * Integrated ServerView Diagnostics Technology for indication of internal failed components Options: * 2nd hot plug power supply module 750W (PSU) for redundancy * Two optional Rackmount kits RMK-F1_RX100-200-300 ( full extraction ) or RMK-ST_RX100-200 ( partial extraction with lower cost ) * 6x 2.5" HD backplane kit with additional DVD option * 8x 2.5" HD backplane kit ( no DVD possible ) * - Optional modular RAID 0/1/1e controller with IME (Integrated Mirroring Enhanced) support based on LSI 1064 / 1068 chipset or as alternative - optional modular RAID 5 controller based on LSI 1078 chipset * LED`s in the front panel for indication of a failed CSS component ( Customer Self Service ) Simultaneously components are marked which can be replaced by the customer. This LEDs can be dispalyed during service even without mains connection. Systemboard D2786 with: * Up to two Xeon Dual Core, Quad-Core or Turbo Quad Core CPU`s ( Nehalem-EP, LGA 1366 socket ) with serial QPI links ( Quick Path Interconnect ) and three memory channels per CPU First CPU has to be selected for an orderable basic unit, * Chipset Intel 5500 (codenamed Tylersburg-24D = Tylersburg-EN) * ICH10R Southbridge with onboard SATA-RAID 0/1 support * 3 PCIe slots -1x PCIe-2 x8 (standard and Low Profile cards) and 1x PCIe-2 x8 (Low Profile cards only) -1x PCIe-2 x4 internal for modular RAID controller only * 12 memory slots for max. 96GB with 8GB registered DDR3 RAM or max. 24GB with 2GB unbuffered DDR3 RAM available - Memory is divided into 6 DIMMs per CPU ( 3 channels with 2 slots per channel ) - Max. two registered modules or two unbuffered modules are possible per channel - No mix of registered and unbuffered modules is allowed - First Memory ( one module ) has to be selected for an orderable basic unit per CPU - Memory upgrade is possible module wise for the Independent Channel Mode or for the Performance Mode, - Mirrored Channel Mode is supported with 2 identical modules in channel A+B CPU 1 or D+E CPU 2 - Spare Channel Mode is supported with 3 identical modules in channel A+B+C CPU 1 or D+E+F CPU 2 (Spare Channel Mode as soon as released ) - SDDC (Chipkill) is supported only for registered memory modules, * 4-port SATA controller on-board included in Intel Southbridge ICH10R for SATA Raid0/1, Max. 4 SATA HD`s are supported * One SATA port on-board for 1x DVD integrated in the Intel Southbridge ICH10R * Dual Port 10/100/1000 x4 PCI Express* Gigabit Ethernet Intel LAN controller 82575EB (Zoar) on-board * iRMC S2 (integrated Remote Management Controller) on-board server management controller with dedicated 10/100 Service LAN-port and integrated graphics controller. The Service LAN-port can be switched alternatively on standard Gbit LAN port 1 * Graphics Controller integrated in iRMC S2 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)

6 of 26

A Interfaces at the rear: * 1x RS-232-C (serial, 9 pins) (usable for BMC or OS or shared) * 1x VGA (15 pins): If Front-VGA is used, then Rear-VGA is disabled * 3x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 2x LAN RJ45, 1x Service-LAN RJ45 Interfaces on the front: * 3x USB 2.0 ( UHCI ) with 480MBit/s, no USB wakeup * 1x VGA (15 pins): If Front-VGA is used, then Rear-VGA is disabled
Interfaces internal: * 1x USB 2.0 ( UHCI ) with 480MBit/s for dongle funcionality ( uSSD memory ), no USB wakeup * 1x SATA interface for DVD ( only usable with 6x 2.5" HDD + DVD Option ) * 4x SATA interface for 4 SATA HD`s ( only usable with 6x 2.5" HDD + DVD Option ) Cables: 1. One SAS cable for up to 4 internal hot plug HDDs if the the 6x 2.5" HDD + DVD Option is configured Second SAS cable is optional for port 5 and 6 if max 6 HD`s are required 2. Two SAS cables for up to 8 internal hot plug HDDs if the 8x 2.5" HDD Option is configured 3. Power cable Software: - ServerView Suite Software package incl. ServerStart, ServerBooks, Management Software and Updates - Documentation engl. (multilingual on CD)
Mounting kits for PRIMERGY RX200 S5 - 1 pair of telescopic rails either full or partial extraction with partial extraction server can not be fully pulled out, but lower cost version of RMK - 1 Vario carrier DC-PC-3rd party Rack allows toolless adjustable in depth and easy mounting Mounting kit for mounting of servers in FSC 19" PRIMECENTER- racks and all server racks conforming to EIA standard EIA-310-D for 19" racks. Therefore the mounting kit is variable in depth from 704-790mm
Cables included in basic unit
Connections 1. SATA DVD 2. 4-port SAS cable HDDs 3. 4-port SAS cable HDDs 4. Power cable Conditions for SATA cable and one ore two 4-port SAS cables see description "Cables" above Cable PRIMERGY RX200 S5 ( optional ) ( optional ) Key: SAS SATA

7 of 26

B Base unit without CPU and Memory S26361-K1272-V101 Rack version for 19'' racks with 1 hot plug power supply module No Rack-mounting kit included For an orderable basic unit one CPU = first CPU, one memory = first memory as well as one of two possible rack-mount kit options has to be selected
Be aware of import restrictions! S26361-F3552-E1 TPM Module Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system S26361-F3552-L1 TPM Module add-on kit for later integration (loose delivery) Trusted Platform Module on Motherboard Use according to import restrictions max. 1x per system Only 1 TPM per system. Loose delivery for later integration possible for customer.

Max. two CPU`s can be selected per basic unit One of following CPUs has to be selected as first CPU for an orderable basic unit Optional second CPU has to be the same type like the first CPU Dual-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) with passive heat sink, occupies socket for one CPU Xeon DP E5502 (1,86GHz/4M/4,8GT) / 80W Quad-Core CPU`s with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) and passive heat sink occupies socket for one CPU Xeon DP E5504 (2.00GHz/4M/4,8GT) / 80W Xeon DP E5506 (2.13GHz/4M/4,8GT) / 80W S26361-F3286-E186
Note: Max. DDR3 Bus Speed depends on:
- max. DDR3 Bus Speed from the CPU and - max. DDR3 Memory Speed and - max. memory modules on one memory channel
S26361-F3287-E200 S26361-F3287-E213
Turbo Quad-Core CPU`s with max. 1066MHz DDR3 speed ( 5.86GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon DP E5520 (2.26GHz/8M/5,86GT) / 80W S26361-F3288-E226 Xeon DP E5530 (2.40GHz/8M/5,86GT) / 80W S26361-F3288-E240 Xeon DP E5540 (2.53GHz/8M/5,86GT) / 80W S26361-F3288-E253 Turbo Quad-Core CPU`s with max. 1333MHz DDR3 speed ( 6.4GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon DP X5550 (2.66GHz/8M/6,4GT) / 95W S26361-F3289-E266 Xeon DP X5560 (2.80GHz/8M/6,4GT) / 95W S26361-F3289-E280 Xeon DP X5570 (2.93GHz/8M/6,4GT) / 95W S26361-F3289-E293 Low Voltage Quad-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) - 1x 64-bit Intel Xeon DP (4MB shared TLC = Third Level Cache ) with passive heat sink occupies socket for one CPU Xeon LV DP L5506 (2,13GHz/4M/4,8GT) / 60W S26361-F3290-E213
Low Voltage Turbo Quad-Core CPU with max. 1066MHz DDR3 speed ( 5.86GT/s) - 1x 64-bit Intel Xeon DP (8MB shared TLC = Third Level Cache ); Hyper-Threading (HT) and passive heat sink occupies socket for one CPU Xeon LV DP L5520 (2,26GHz/8M/5,86GT) / 60W S26361-F3290-E226 Xeon LV DP L5530 (2,40GHz/8M/5,86GT) / 60W S26361-F3290-E240

10 of 26

E Section
- There are 6 memory slots for max. 48GB registered (reg) DDR3 RAM per CPU available with 8GB RDIMMs or max. 12GB unbuffered (ub) DDR3 RAM per CPU available with 2GB UDIMMs => max. 96GB registered or 24GB unbuffered RAM for two CPU`s possible ( For explanation of following terms refer to section "Memory Configurations" - The memory area is divided into 3 channels per CPU with 2 slots per channel - Slot 1 of each channel belongs to memory bank 1, the slot 2 belongs to memory bank 2 Registered and unbuffered memory modules can be selected No mix of registered and unbuffered modules allowed. DDRand 1333MHz modules can be mixed, but run always with the slower speed. With two DIMMs per channel only 1066MHz is possible independent of the module speed. SDDC (Chipkill) is supported only for registered memory modules. 1.) In the "Independent Channel Mode" is following configuration possible - Each slot can optionally be equipped either with registered x4 organized DDR3 modules: 2GB single rank, 4GB and 8GB dual rank, or with unbuffered x8 organized DDR3 modules: 1GB single rank and 2GB dual rank 2.) In the "Spare Channel Mode" is following configuration possible - Each memory bank can optionally be equipped with 3x2GB single rank, 3x4GB and 3x8GB dual rank DDR3 modules. Each slot of one bank has to be equipped with identical modules for spare channel mode In channel A and B of CPU 1 or channel D and E of CPU 2 are always the active memory modules, in channel C of CPU 1 and channel F of CPU 2 is always the spare module No special order codes with UDIMMs are offered for this mode 3.) In the "Mirrored Channel Mode" is following configuration possible - Each memory bank can optionally be equipped with 2x2GB single rank, 2x4GB and 2x8GB dual rank DDR3 modules. In each memory bank channel A and B of CPU 1 or channel D and E of CPU 2 have to be equipped with identical modules for mirrored channel mode. Channel C of CPU 1 and channel F of CPU 2 is not equipped In channel B is always the mirrored memory of channel A of CPU 1 In channel E is always the mirrored memory of channel D of CPU 2 No special order codes with UDIMMs are offered for this mode - For each CPU minimum 1 memory module has to be configured in Independent Channel Mode ( => Additional memory extensions can still be configured up to five times per CPU ) or one bank has to be equipped with two modules (channel A+B for CPU 1 or D+E for CPU 2) in Mirrored Channel Mode ( => Additional memory extensions can still be configured up to one time per CPU ) or one bank has to be equipped with three modules (channel A+B+C for CPU 1 or D+E+F for CPU 2) in Spare Channel Mode or Performance Mode ( => Additional memory extensions can still be configured up to one time per CPU )

11 of 26

For a description of memory configurations refer to section "Memory Configurations"
Minimum one memory module or memory order code per CPU = first memory Registered (reg) RDIMMs
For "Independent Channel Mode" usage!
- One DDR3-1066 PC3-8500 reg ECC memory module Note 1.) Max. DDR3 memory speed depends on the memory configuration of one CPU memory channel and on the speed of the CPU itself. The memory channel with the lowest speed defines the speed of all CPU channels in the system, also for the channels of the second CPU if configured. One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz,
Memory 2GB (single rank) Memory 4GB (dual rank) Memory 8GB (dual rank)
S26361-F3284-E513 S26361-F3284-E514 S26361-F3284-E515
Choose up to 6 order codes above per CPU.
6x for each CPU with max. 2 modules per channel

Registered (reg) RDIMMs

- One DDR3-1333 PC3-10600 reg ECC memory module
Note 2.) Max. DDR3 memory speed 1333MHz is only possible with CPU`s X5550, X5560 and X5570
S26361-F3285-E513 S26361-F3285-E514 S26361-F3285-E515
Unbuffered (ub) UDIMMs cannot be mixed with registered (reg ) RDIMMs Memory speed in all configurations with UDIMMs is max. 1066MHz depending on the used CPU speed

Unbuffered (ub) UDIMMs

6x for each CPU with max. 2 modules per channel - One DDR3-1066 PC3-8500 ub ECC memory module
Memory 1GB (single rank) S26361-F3970-E512 Memory 2GB (dual rank) S26361-F3970-E513 No Chipkill Choose up to 6 order codes above per CPU.

12 of 26

S26361-F3284-E1 Spare Channel Mode Installation With this order code a BIOS setup for spare mode is factory preinstalled The three identical memory modules of following order codes are always equipped in one memory bank to use the Spare Channel Mode In this mode only two modules are active the third module is the spare module
S26361-F3284-E2 Performance Mode Installation With this order code BIOS setup is default for highest performance The three identical memory modules of following order codes are always equipped in one memory bank to run with highest performance In this mode all three modules are active and full capacity can be used
SP = for "Spare Channel and Performance Mode" usage!
- Three DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory SP 6GB (3x 2GB single rank) S26361-F3284-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3284-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3284-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.
2x for each CPU with max. 2 modules per channel
- Three DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)

Memory SP 6GB (3x 2GB single rank) S26361-F3285-E533 = 4GB usable memory for Spare Channel Mode = 6GB usable memory for Performance Mode Memory SP 12GB (3x 4GB dual rank) S26361-F3285-E534 = 8GB usable memory for Spare Channel Mode = 12GB usable memory for Performance Mode Memory SP 24GB (3x 8GB dual rank) S26361-F3285-E535 = 16GB usable memory for Spare Channel Mode = 24GB usable memory for Performance Mode Choose up to 2 order codes above per CPU.

13 of 26

S26361-F3284-E3 Mirrored Channel Mode Installation With this order code a BIOS setup for Mirrored Channel Mode is factory preinstalled The two identical memory modules of following order codes are always equipped in one memory bank to use the Mirrored Channel Mode In this mode only one module contains active data, the second modul contains the mirrored data
MM = for "Mirrored Channel Mode" usage!
- Two DDR3-1066 PC3-8500 reg ECC memory modules See Note 1.)
Memory MM 4GB (2x 2GB single rank) S26361-F3284-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3284-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3284-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.
- Two DDR3-1333 PC3-10600 reg ECC memory modules See Note 2.)
Memory MM 4GB (2x 2GB single rank) S26361-F3285-E523 = 2GB usable memory for Mirrored Channel Mode Memory MM 8GB (2x 4GB dual rank) S26361-F3285-E524 = 4GB usable memory for Mirrored Channel Mode Memory MM 16GB (2x 8GB dual rank) S26361-F3285-E525 = 8GB usable memory for Mirrored Channel Mode Choose up to 2 order codes above per CPU.

H Section

Graphics
Graphics Controller integrated in iRMC S2 (integrated Remote Management Controller): 1600x1200x16bpp 60Hz, 1280x1024x16bpp 60Hz, 1024x768x32bpp 75Hz, 800x600x32bpp 85Hz, 640x480x32bpp 85Hz (1280x1024x24bpp 60Hz only possible if local monitor or remote video redirection is off)

14 of 26

Memory Configuration PRIMERGY RX200 S5

Each CPU offers 6 Slots for DDR3 Memory Modules organised in 2 Banks and 3 Channels. If you need more than 6 Slots you have to configure the 2nd CPU. Depending on the amount of memory configured you can decide between 4 basic modes of operation (see explanation below). There are 2 different kinds of DDR3 Memory Modules available: UDIMM and RDIMM. UDIMM and RDIMM offer different functionality. Application detect multi-bit errors offers max. flexibility, upgradeability, capacity use UDIMM modules for lowest cost Mirrored Channel Mode 2 identical Modules / Bank **) x offers maximum security Performance Mode *) 3 identical Modules / Bank **) x offers maximum performance and capacity Spare Channel Mode *) 3 identical Modules / Bank **) x balances security and capacity *) = Performance Mode and Spare Channel Mode use different BIOS settings. ( Spare Channel Mode as soon as released ) **) = technically possible but no Order Numbers available, use at your own risk x = order codes available Mode Configuration chip kill support any Independant Channel Mode 1, 2 or 3 Modules per Bank UDIMM n.a. x RDIMM yes x
Capacity Min. Memory per CPU Max. Memory per CPU Max. Memory per System Memory-Speed:
Configuration 1 Module / CPU 6 Modules / CPU 12 Modules / System
UDIMM RDIMM 1GB 2GB 12GB 48GB 24GB 96GB
Notes with one CPU with one CPU if second CPU is configured
Max. DDR3 memory speed depends on the memory configuration on one memory channel and the speed of the CPU One DIMM per channel = max. 1333MHz, two DIMMs per channel = max. 1066MHz, three DIMMs per channel = max. 800MHz, The memory channel with the lowest speed defines the speed of all CPU channels in the system,

Used CPU

Max. Memory-Bus speed depending on DIMMs / channel if following memory speed is used for specific CPU`s 1066MHz 1066MHz 1066MHz 1333MHz
( 1DIMM ) ( 2 DIMMs ) ( 3 DIMMs ) ( 1 DIMM )

1333MHz

( 2 DIMMs )

( 3 DIMMs )

Dual-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon DP E5502 (1,86GHz/4M/4,8GT) / 80W Quad-Core CPU`s with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon DP E5504 (2.00GHz/4M/4,8GT) / 80W Xeon DP E5506 (2.13GHz/4M/4,8GT) / 80W Turbo Quad-Core CPU`s with max. 1066MHz DDR3 speed ( 5.86GT/s) Xeon DP E5520 (2.26GHz/8M/5,86GT) / 80W Xeon DP E5540 (2.53GHz/8M/5,86GT) / 80W Turbo Quad-Core CPU`s with max. 1333MHz DDR3 speed ( 6.4GT/s) Xeon DP X5550 (2.66GHz/8M/6,4GT) / 95W Xeon DP X5570 (2.93GHz/8M/6,4GT) / 95W Low Voltage Quad-Core CPU with max. 800MHz DDR3 speed ( 4.8GT/s) Xeon LV DP L5506 (2,13GHz/4M/4,8GT) / 60W Low Voltage Turbo Quad-Core CPU with max. 1066MHz DDR3 speed ( 5.86GT/s) Xeon LV DP L5520 (2,26GHz/8M/5,86GT) / 60W

800 MHz

800 MHz 800 MHz

1066 MHz 1066 MHz

1333 MHz 1333 MHz

1066 MHz

Configuration hints: - The memory sockets on the systemboard offer a color coding: Bank I black sockets Bank II blue sockets ( or white latch ) - A so called Bank consits of 1 memory module on every Channel available on one CPU (examples see below) Bank I on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank II on CPU 1 up to 3 memory modules connected to Channel A, B and C on the first CPU Bank I on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU Bank II on CPU 2 up to 3 memory modules connected to Channel D, E and F on the second CPU - See below (next page) for a detailed descriptions of the memory configuration supported.

15 of 26

1. Independent Channel Mode
Channel A Channel B Channel C Channel D Channel E Channel F required required if 2nd CPU is configured optional, same type in Bank per CPU optional, any type -------not used
Bank I Data (black sockets) Bank II Data (blue sockets)

Data Data

1st XEON CPU (Dual-or Quad Core)
2nd XEON CPU (Dual-or Quad Core)
Independent Channel Mode allows all channels to be populated in any order Can run with differently rated DIMMs and use the settings of the slowest DIMM installed in the system Independent Channel Mode is supported using UDIMM or RDIMM memory modules

2. Mirrored Channel Mode

Mirror Mirror

---------------

Mirrored Channel Mode requires identical modules on channel A and B (1st CPU) or channel D and E (2nd CPU) 50% of the capacity is used for the mirror => the available memory for applications is only half of the installed memory channel C (1st CPU) or channel F (2nd CPU) are not usable in Mirrored Channel Mode Mirrored Channel Mode is supported using RDIMM memory modules
3. Performance Channel Mode
Performance Channel Mode requires identical modules on all channels of each Bank per CPU Performance Channel Mode is supported using RDIMM memory modules
4. Spare Channel Mode ( As soon as released )

Spare Spare

Spare Channel Mode requires identical modules on all channels of each Bank per CPU one third of the capacity is used for the spare => the available memory for applications is two thirds of the installed memory Spare Channel Mode is supported using RDIMM memory modules

16 of 26

Accessible drives

Setup RX200 S4 by ServerStart is supported with following configurations: no Floppy, no DVD, no CD: remote installation only ( PXE service & DHCP server required) built in CD/DVD or USB CD/DVD, no Floppy disk drive: UNC Network share reachable or USB Floppy connected USB Floppy, no CD/DVD: USB CD/DVD connected
If installation is done locally, make sure you have external FDD available for driver installation.
Following USB Components are available 1) USB DVD+-RW: Super Multi DVD slim drive 2) FDD USB (external): external USB FDD 3) USB Keyboard: KBPC PX D, professional keyboard 4) USB Mouse: Optical Wheel Mouse Tilt USB/PS2 5) USB Memorybird: MyUSB P910 8GB
S26391-F7119-L100 (USB cable included) S26391-F264-L226 (USB cable included) S26381-K340-V120 S26381-K415-L100

S26391-F6047-L208

S26361-F3531-E2 Blu-ray Combo slim SATA 6x BD-ROM, 16x DVD, 40x CD BD DL and all CD/DVD formats 0.5 x 5.25", black bezel max. 1x per system
S26361-F3269-E2 DVD-RW supermulti slim SATA all formats, DUAL/DL, DVD-RAM only W2K, W3K and Linux 0.5 x 5.25", black bezel max. 1x per system
Configurations with CD /DVD are only possible with the 6x 2.5" HDD + DVD Option With onboard SATA controller are max. 4x SATA HD`s and one DVD possible. J Modular Disk Array + 6x 2.5" HD`s K Modular Disk Array + 8x 2.5" HD`s

17 of 26

J Section
Drive Bay for 6x 2.5" HD Basic Unit
S26361-F3317-E600 6x 2.5" HDD + DVD Option Drive Bay with up to 6x 2.5" slots plus one bay for DVD
With this 6x 2.5" HDD + DVD Option only 4 ports are electrically connected to e.g. a 4 port SAS controller or the on-board 4-port SATA Raid 0/1 controller. In order to connect HD5 and HD6 additionally, the UpgradeKit from 4 to 6 HD`s and a 8-port SAS controller is necessary
S26361-F3317-L500 8x 2.5" HDD Upgrade Option Upgrade to a Drive Bay with up to 8x 2.5" slots
Modular Raid 0/1, Raid5 for 4x 2.5" or 6x 2.5" SAS or SATA HD`s. On-board Controller for 4x 2.5" SATA HD`s
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1064 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 4 internal ports PCIe x4, 160mm without bracket max. 1x per system

Modular Raid 0/1 controller ( 1064 / 1068) with IME support for SAS-HDs IME (Integrated Mirroring Enhanced) offers the RAID levels 0, 1, 1E IME is a RAID 0, 1 implementation, whereby RAID 1 can operate an odd number of hard disks. Up to 4 hard disks including one hot spare HD are possible (limited by HHD slots in system). Windows 2003 as well as SUSE and RedHat Linux are supported The SAS IME solution supports 2 independent RAID volumes. There is no support of any external storage by this RAID solution.
UpgradeKit from 4 to 6 HD`s
S26361-F3257-E250 4-port SAS-cable for ports 5 and 6 necessary for max. 6 HD`s max. 1x per System For Raid 5 configurations with max. 4 HD`s no Upgradekit from 4 to 6 HD`s is necessary
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1068 RAID 0, 1 & 1E no controller cache SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
SATA as son as released Modular Raid 5 controller for SAS/SATA-HDs
RAID levels 0, 1, 10, 5, 50, 6 and 60 are supported There is no support of any external storage by this RAID solution.
Base Units contain a 4-port on-board SATA controller supporting RAID Levels 0, 1
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 256MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
S26361-F3257-Eport SAS RAID Controller LSI MegaRAID SAS 1078 512MB Cache with ECC optional BBU SAS 3Gb/sec 8 internal ports PCIe x4, 160mm without bracket max. 1x per system
on-board 4-port SATA Raid 0/1 controller included in chipset Southbridge ICH10R
S26361-F3257-E155 Cache Battery Backup Unit with 55cm cable set max. 1x per System
Only one BBU per System possible, either for MegaRAID SAS 8880E or for MegaRAID SAS 1078 Upgrade option: S26361-F3257-L110

18 of 26

G-VIII
4x or 6x 2.5" SAS / SATA Hard disk drives
4x 2.5" SATA Hard disk drives
With onboard SATA controller up to 4x SATA HD`s or up to 4x SSD HD`s are possible No mix between SATA HD`s and SSD HD possible !
S26361-F3298-E32 SSD 32GB SATA 3Gb/s hot plug/hot replace tray max. 2x per base unit

S26361-F3298-E32 SSD 32GB SATA 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3298-E64 SSD 64GB SATA 3Gb/s hot plug/hot replace tray max. 8x per base unit
With 0/1/1E RAID Controller F3257-E8 only Release with 5/6 RAID Contoller F3257-E256 -E512 will follow soon
S26361-F3292-E173 HD 73GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E114 HD 146GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E130 HD 300GB 10krpm 2.5" 10000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E573 HD 73GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit
S26361-F3292-E514 HD 146GB 15krpm 2.5" 15000rpm,<4,5ms, 8MB Cache SAS 3Gb/s hot plug/hot replace tray max. 8x per base unit

21 of 26

L Section
External SAS Disk Array, SAS backup drives or SCSI peripheral devices
External 4-port SAS-controller for external SAS Disk Array S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 without iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system S26361-F3890-Eport SAS RAID Controller LSI MegaRAID SAS8880E 512MB Cache with ECC RAID 0, 1, 10, 5, 50, 6 & 60 with iBBU SAS 3Gb/sec 8 port external PCIe x4, 167mm low profile bracket max. 1x per system Only one BBU per System possible, either for MegaRAID SAS 8880E or for MegaRAID SAS 1078 for loose delivery please order S26361-F3890-L501 Contr. w/o BBU S26361-F3890-L13 optional BBU

SAS-controller for

external backup drives
S26361-F3271-E201 SAS Controller 3Gb/s 8 port LP LSI SAS3442E-R Low Profile PCIe x4, int: 4 port ext: 4 port max. 2x per system

SCSI-controller for

external drives and peripheral devices Only released for SX10. All contr. for the connection of external storage systems are delivered without cables. For the configuration of external cabling see configurator
S26361-F3270-E201 SCSI U320 Controller Adaptec SCSI Card 29320LPE PCIe x1, int: LVD HD68 ext: VHDCI 68pin max. 2x per system

22 of 26

Fibre Channel
Fibre Channel Controller for external storage systems S26361-F3306-E201 4GBit/s FC Controller Emulex LPe1150, Low Profile bracket 1 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system S26361-F3306-E202 4GBit/s FC Controller Emulex LPe11002, Low Profile bracket 2 channel 4GBit/sec FC Controller LC Interface for 50m Fiber PCIe x4, 170mm max. 2x per system

C) 2-Port Copper PCIe Adapter 1000TX S26361-F3228-E201 ( Redwater ) Gigabit Ethernet Controller Dual 1000TX Eth. Ctrl 2x1Gbit PCIe PRO/1000PT Cu Intel Pro/1000PT dual Server Adapter PCIe x4 ext: for RJ45-plug, Cat 5 max. 2x per system
D) 4-Port Copper PCIe Adapter 1000TX S26361-F3462-E201 ( Kirkwood 2 ) Gigabit Ethernet Controller Quad 1000TX Eth. Ctrl 4x1Gbit PCIe PRO/1000PT Cu Intel Pro/1000PT quad Server Adapter PCIe x4 ext: for RJ45-plug, Cat 5 max. 2x per system
E) 2-Port MMF PCIe Adapter 10000SX S26361-F3505-E201 (Green Fountain SR) 10 Gigabit Ethernet Controller dual port LC lp Eth Ctrl 2x10Gbit PCIe x8 XF SR LC lp Intel 10 Gigabit XF SR Dual Port Server Ad. PCIe x8, low profile ext:LC-connector max. 1x per system

24 of 26

O Section
System Management Products (RemoteView)
S26361-F1790-E241 iRMC S2 advanced pack integrated remote management controller activation key for graphical console redirection and remote media redirection max. 1x per system
iRMC S2 (integrated Remote Management Controller) onboard server management controller with dedicated 10/100 Service LAN-port and integrated graphics controller. The Service LAN-port can be switched alternatively on standard Gbit LAN port

Miscellaneous

Options and other peripherals For other options, refer to SystemArchitect and Pricelist. These options are supplied lose with the shipment. For suitable peripherals for this product, please refer to SystemArcitect.
Country specific power cord
Country specific power cords are not required for rack versions, except for USA&Canada. Power cords are shipped in a rack version with inlet connector for non-heating apparatus. Description in englisch. Both included in basic unit. (1x with Standard PSU, 2x with hot plug upgrade) T26139-Y1742-E10 USA, Canada For shipments to USA&Canada, you have to order one power cord (1,8m, grey) per power supply.

End PRIMERGY RX200 S5

25 of 26

Change Report

2009-10-01 2009-06-30 2009-06-17 2009-03-31

Order number

Changes
new SSD HD drives - as soon as available Spare Channel Mode Installation - now available Added E5530 and X5560 CPU First Release