SYSTEM BOARD D1218 / D1219
ADDITIONAL TECHNICAL MANUAL

Are there.

. any technical problems or other questions you need clarified? Please contact: Our Hotline: Mo-Fr: 8 a.m. - 6 p.m. Sat: 9 a.m. - 2 p.m. Tel.: ++49 (0) 005 your sales outlet The latest information on our products, tips, updates, etc., can be found on the Internet under: http://www.fujitsu-siemens.com/mainboard
Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprim sur du papier recycl. Este manual ha sido impreso sobre papel reciclado. Questo manuale stato stampato su carta da riciclaggio. Denna handbok r tryckt p recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Bestell-Nr./Order No.: A26361-D1218-Z180-1-7619 Printed in the Federal Republic of Germany AG 1100 11/00

A26361-D1218-Z180-1-7619

System Board D1218 / D1219
Additional Technical Manual

November 2000 edition

Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. Magic Packet is a registered trademark of Advanced Micro Devices, Inc. Rambus, RDRAM, and the Rambus Logo are registered trademarks of Rambus Inc. Direct Rambus, RIMM, SO-RIMM, and Direct RDRAM are trademarks of Rambus Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged.
Copyright Fujitsu Siemens Computers GmbH 2000
All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved.

Contents

Introduction.....1 Features.....2 Mechanics.....4 Connectors.....8 Serial chipcard reader or internal serial port 2 (COM 2)...8 Front panel connector....9 Fan 2 connector.... 10 Wake On LAN (WOL) connector... 10 USB port - Dual channel... 10 USB port - Single channel... 11 CD-ROM audio connector (internal)... 11 Auxiliary (MPEG, TV) audio connector (internal).. 12 Fan 1 connector.... 12 Power supply monitoring... 13 Intrusion connector for case open detect for optional push-button (opener). 13 Configuration..... 14 Functions controlled by the configuration switch.. 14 Power.... 15 Power requirement.... 15 Power loadability.... 15 Documentation..... 15 Installing drivers.... 15 Upgrading main memory..... 16 Troubleshooting.... 16 Message BIOS update.... 16 The screen stays blank... 16

Introduction

This system boards are available in different configuration levels. Depending on the hardware configuration of your device, it may be that you cannot find several options in your version of the system board, even though they are described.
You may find further information e. g. in the complete Technical Manual for the system board and in the description "BIOS Setup". Further information to drivers is provided on the supplied drivers diskettes or on the "Drivers & Utilities" or "ServerStart" CD. For detailed information please look at chapter "Installing drivers". The latest BIOS version or drivers can be found on the internet under http://www.fujitsu-siemens.com/en/service. Computer system boards and components contain very delicate IC chips. To protect them against damage caused from electric static, you have to follow some precautions:
Unplug your computer when you work inside. Hold components by the edge, dont touch their leads. Use a grounded wrist strap.
Place the system board and the components on a grounded antistatic pad whenever you work outside the computer. Once you have installed the system board, you should remove the battery protection (i.e. the thin plastic plate between battery and contact spring).

English - 1

Features
The table shows two assembly versions of this system board as example. Function Processor socket Processor Formfactor Front Side Bus in MHz Chipset Memory sockets PCI slots AGP Port CNR slot Type A System monitoring Thermal Management Wake On LAN Basic Alert On LAN II Chipcard reader Save to Disk (ACPI S4) Save to RAM(ACPI S3) Game/midi port LAN onboard Audio onboard VGA onboard USB ports extern USB ports intern Version D1218-A1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815e 3 DIMM ---x -x x x x Ethernet Contr. 82562ET AD1885 i 2 Version D1218-B1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815e 3 DIMM 1 --x -x x x x Ethernet Contr. 82562ET AD1885 i 1 - internal connector 1 - via CNR connector

2 - English

The table shows two assembly versions of this system board as example. Function Processor socket Processor Formfactor Front Side Bus in MHz Chipset Memory sockets PCI slots AGP Port ISA slot System monitoring Thermal Management Wake On LAN Basic Alert On LAN II Chipcard reader Save to Disk (ACPI S4) Save to RAM(ACPI S3) Game/midi port LAN onboard Audio onboard VGA onboard USB ports extern USB ports intern Version D1219-A1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815e 3 DIMM -x x x x x x x x Ethernet Contr. 82562EM AD1885 i 815E Version D1219-C1X PGA 370 Intel Celeron or Pentium III ATX 66/100/133 815e 3 DIMM 1 x x x x x x x x Ethernet Contr. 82562EM AD1885 i 815E 2 2

English - 3

Mechanics
Layout System board D1218 ATX 12" x 8 (304,8 mm x 203.2 mm) Some of the following connectors are optional and may therefore not be included on your system board.

DIMM 3 DIMM 2 DIMM 1

AGP / GPA

9a 9b9c

1= 2= 3= 4= 5= 6=
PS/2 Mouse Controller PS/2 keyboard port LAN port USB ports 1 and 2 Serial Port 1 Parallel Port
1 = VGA port 2 = Game/Midi 9a = Audio Line-Out 9b = Audio Line-In 9c = Audio Micro-In
The components and connectors marked are not necessarily present on the system board.

4 - English

PCI 4 PCI 1 PCI 2 PCI 3 PCI 5
1 = Power Supply 2 = Serial chipcard reader interface or serial port = Floppy Disk Drive 4 = IDE drives 3 and 4 (secondary) 5 = IDE drives 1 and 2 (primary) 6 = Connector for control panel and loudspeaker 7 = Wake On LAN 1= 2= 3= 4= 5= 6= 7= 8= Fan 2 (e. g. for the processor) USB port 4 USB port 3 CD audio input AUX audio input Fan 1 (e. g. for the processor) Power supply monitoring Cover monitoring

English - 5

Layout System board D1219 ATX 12" x 8 (304,8 mm x 203.2 mm) Some of the following connectors are optional and may therefore not be included on your system board.
PS/2 mouse port PS/2 keyboard port LAN port USB ports 1 and 2 Serial port 1 Parallel port
1 = VGA port 2 = Game/Midi port 9a = Audio Line-Out 9b = Audio Line-In 9c = Audio Micro-In

6 - English

PCI 4 PCI 1 PCI 2 PCI 3 PCI 5 ISA
1 = Power supply 2 = Serial chipcard reader interface or serial port = Floppy disk drive 4 = IDE drives 3 and 4 (secondary) 5 = IDE drives 1 and 2 (primary) 6 = Connector for control panel and loudspeaker 7 = Wake On LAN 1= 2= 3= 4= 5= 6= 7= 8= Fan 2 (e. g. for the processor) USB port 4 USB port 3 CD audio input AUX audio input Fan 1 (e. g. for the processor) *) Power supply monitoring Cover monitoring

The components and connectors marked are not necessarily present on the system board. *) only for speed controllable fans (3 pin connector), for 2 pin processor fans use Fan2 connector only.

English - 7

Connectors
Some of the following connectors are optional!
Serial chipcard reader or internal serial port 2 (COM 2)
external via optional cable
Pin Signal DCD 2 SIN 2 SOUT 2 DTR 2 GND EXT SMI (low asserted) RESET (high asserted) GND Pin Signal DSR 2 RTS 2 CTS 2 PC_On_Strobe VCC Auxiliary VCC GND Key

8 - English

Front panel connector

Power On/Off 1)

1) Message LED Sleep LED Power On 1) LED 1) 3) HD-LED

1) Sleep

SCSI LED Input

Speaker

1) Cable is not included in the delivery scope. 2) The same interface 3) 2pin or 3pin connector possible

Pin 25 272) 29

Signal Sleep LED (Cathode) Sleep LED (Anode) Key PowerON_LED (Anode) PowerON_LED (Anode) PowerON_LED (Cathode) Message LED (Anode) Message LED (Cathode) Key HD_LED (Anode) HD_LED (Cathode) GND Power button (low asserted) reserved Reset button (low asserted)

Pin 6 81) 30

Signal Speaker Key GND VCC or GND Key pin Key pin Key Not connected SCSI LED input (low asserted) SCSI LED input (low asserted) Not connected Key GND GND GND
1) Pin 8 is connected to VCC if audio is not onboard. Pin 8 is connected to GND if audio is onboard. 2) The sleep button (optional) functions only for operating systems with APM (not with ACPI).

English - 9

Fan 2 connector
(system fan - supervised) Pin 3 Signal GND +12 V Fan sense
Wake On LAN (WOL) connector
Signal VCC Auxiliary GND Wake pulse (high asserted)

USB port - Dual channel

Pin Pin Signal VCC Dual (max. 250mA) Reserved Power supply on (max 1 second low pulse) Data positive GND Key Key VCC Dual (max. 250mA) Key Power supply on (max 1 second low pulse) Data positive GND
Signal Pin 18 Signal VCC Dual (max. 250mA) Key GND Data negative Over current (low asserted) Key Key VCC Dual (max. 250mA) Key GND Data negative Over current (low asserted)

10 - English

USB port - Single channel
Pin Pin 9 Signal VCC Dual (max. 250mA) Reserved Power supply on (max 1 second low pulse) Data positive GND
Signal Pin 10 Signal VCC Dual (max. 250mA) Key GND Data negative Over current (low asserted)
CD-ROM audio connector (internal)

Pin 3 4

Signal Left CD audio input CD GND CD GND Right CD audio input

English - 11

Auxiliary (MPEG, TV) audio connector (internal)
Signal Left AUX audio input Analog GND Analog GND Right AUX audio input

Fan 1 connector

(processor fan - controlled and supervised, only for 3 pin fans) Pin 3 Signal
GND Controlled fan voltage (0 V / 6.12 V) Fan sense

12 - English

Power supply monitoring

Pin 7 8

Signal Monitor on PS FAN off request (low asserted) PS FAN full on (low asserted) PS FAN pulse SMB CLK SMB DATA VCC EEPROM GND
Intrusion connector for case open detect for optional push-button (opener)
Signal GND Case open (low asserted) Intrusion switch present (low asserted)

English - 13

Configuration
Functions controlled by the configuration switch
Function Password skip Off Recovery BIOS Off Floppy write protect Off Low auxiliary power supply (<2 A) High auxiliary power supply SKP on off X X X X X X RCV X X on off X X X X FWP X X X X on off X X PSS X X X X X X on off
PSS must be switched on for systems with not enough 5 V auxiliary power for all its self powered wake devices (WakeOnLAN, USB, PCI) in S3-S4.

14 - English

Documentation

Power requirement

Source Main power supply Main power supply Main power supply Main power supply Auxiliary power supply Voltage +5.0 V +12 V -12 V +3.3 V +5.0 V Maximum variation 5 % 10 % 10 % 5 % 5 % Maximum current 15 A 350 mA 200 mA 4A 2A Comment

Power loadability

Fuse number 1 Maximum fuse current 750 mA Function Keyboard port Mouse port Game port VGA connector Universal serial bus (USB) Port A Universal serial bus (USB) Port B Maximum function current Not specified Not specified Not specified Minimum 50 mA 500 mA 500 mA

500 mA 500 mA

Insert the "Drivers & Utilities" CD. If the CD does not start automatically, run the START.EXE file in the main directory of the CD. Select your system board or your device. Select Documentation. Select - Technical Manuals Select - Technical Manuals (BIOS)
You may have to install the Acrobat Reader - Software on the CD-ROM (path: utls/acrobat) before reading! For more details please read the according readme.txt files.

Installing drivers

Insert the "Drivers & Utilities" CD. If the CD doesn't start automatically call the START.EXE file in the main directory of the CD. If the system board list is displayed select the system board or select under Driver the operating system used and the audio and video drivers.

English - 15

Upgrading main memory
Support: Size: Technology: The system needs at least one module. From 32 Mbytes up to 512 Mbytes SDRAM PC100 or PC133 unbuffered DIMM modules. 168 pin, 3.3 V, 64 bit, 72 bit (with ECC), SDRAM 2 M, 4 M, 8 M, 16 M and 32 M x 64 bit 2 M, 4 M, 8 M, 16 M and 32 M x 72 bit For one socket 16, 32, 64, 128, 256 or 512 Mbyte SDRAM modules with ECC can be plugged in but ECC is not functioning. Mix of ECC modules with non ECC modules is possible. Support for up to 2 single sided or 2 double sided DIMM modules. Mix of PC100 and PC133 DIMMs is possible, but all modules will only work at PC100 speed.

Granularity:

Troubleshooting

Message BIOS update

The System BIOS provides optimum support for the processor you have chosen. If the message BIOS update for installed CPU failed appears the microcode required for the processor inserted must still be loaded. Further information on this is available in the "BIOS Setup" manual on the "Drivers & Utilities" CD provided.

The screen stays blank

If your screen stays blank this may have the following cause: The wrong RAM memory module has been inserted
See the chapter "Main Memory" for information which memory modules can be used.
ACPI S3 (Save-to-RAM) and/or ACPI S4 (Save-to-Disk) doesn't work This system board is fully compliant for ACPI S3 and S4. Therefore it is PC99 certified by Microsoft. If you have any problems with ACPI please ensure that all of your components are supporting ACPI S3 and S4. Operating system Hardware and drivers of controllers (e. g. VGA, audio, LAN, SCSI controllers).
For further information please refer to http://developer.intel.com/technology/iapc/involve.htm.

16 - English