Reviews & Opinions
Independent and trusted. Read before buy Fujitsu Siemens T-bird!

Fujitsu Siemens T-bird

Manual

Preview of first few manual pages (at low quality). Check before download. Click to enlarge.
Manual - 1 page 

Download (English)
Fujitsu Siemens T-bird, size: 66 KB
Related manuals
Fujitsu Siemens T-bird Annexe 1
Fujitsu Siemens T-bird Annexe 10
Fujitsu Siemens T-bird Annexe 2
Fujitsu Siemens T-bird Annexe 6
Fujitsu Siemens T-bird Annexe 5

Instruction: After click Download and complete offer, you will get access to list of direct links to websites where you can download this manual.

About

Fujitsu Siemens T-birdAbout Fujitsu Siemens T-bird
Here you can find all about Fujitsu Siemens T-bird like manual and other informations. For example: review.

Fujitsu Siemens T-bird manual (user guide) is ready to download for free.

On the bottom of page users can write a review. If you own a Fujitsu Siemens T-bird please write about it to help other people.

 

[ Report abuse or wrong photo | Share your Fujitsu Siemens T-bird photo ]

User reviews and opinions

<== Click here to post a new opinion, comment, review, etc.

No opinions have been provided. Be the first and add a new opinion/review.

 

Documents

doc0

Mainboard Getting Started

Deutsch English

Mainboard D2164 / Mainboard D2168
Sie haben technische Fragen oder Probleme? Wenden Sie sich bitte an: Ihren zustndigen Vertriebspartner oder Ihre Verkaufsstelle unsere Hotline ber das Kontaktformular unter www.fujitsu-siemens.com/support/contact/ contact.html oder fr Kunden, die ein einzelnes Mainboard gekauft haben: +49(0) 005 Aktuelle Informationen und Updates (z. B. BIOS-Update) zu unseren Mainboards finden Sie im Internet: http://www.fujitsu-siemens.com/mainboards Are there any technical problems or other questions you need clarified? Please contact: your sales partner or your sales outlet unsere Hotline ber das Kontaktformular unter www.fujitsu-siemens.com/support/contact/ contact.html oder fr Kunden, die ein einzelnes Mainboard gekauft haben: +49(0) 005 The latest information and updates (e.g. BIOS update) on our mainboards can be found on the Internet under: http://www.fujitsu-siemens.com/mainboards
Copyright Fujitsu Siemens Computers GmbH 2005
Intel, Pentium and Celeron are registered trademarks of Intel Corporation, USA. Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation. PS/2 and OS/2 Warp are registered trademarks of International Business Machines, Inc. All other trademarks referenced are trademarks or registered trademarks of their respective owners, whose protected rights are acknowledged. All rights, including rights of translation, reproduction by printing, copying or similar methods, even of parts are reserved. Offenders will be liable for damages. All rights, including rights created by patent grant or registration of a utility model or design, are reserved. Delivery subject to availability. Right of technical modification reserved.
Dieses Handbuch wurde erstellt von cognitas. Gesellschaft fr Technik-Dokumentation mbH www.cognitas.de Dieses Handbuch wurde auf Recycling-Papier gedruckt. This manual has been printed on recycled paper. Ce manuel est imprim sur du papier recycl. Este manual ha sido impreso sobre papel reciclado. Questo manuale stato stampato su carta da riciclaggio. Denna handbok r tryckt p recyclingpapper. Dit handboek werd op recycling-papier gedrukt. Herausgegeben von/Published by Fujitsu Siemens Computers GmbH Printed in the Federal Republic of Germany AG 05/05 Ausgabe/Edition 1
Bestell-Nr./Order No.: A26361-D2164-Z110-1-7419

A26361-D2164-Z110-1-7419

Mainboard D2164 / Mainboard D2168 - Internal connectors and slots

PCI Express x16

TPM jumper COM2 - Serial2 S/PDIF connector CD Input USB TPM jumper Serial ATA 1 Serial ATA 2 Jumper Power supply

USB - dual channel

PCI e x1

Fan 2 Floppy disk drive

Channel B Channel A
1 = Key 2 = Not connected 3 = VCC AUX 4 = VCC AUX 5 = Data negative Port x 6 = Data negative Port y 7 = Data positive Port x 8 = Data positive Port y 9 = GND 10 = GND 11 = Key 12 = Not connected CD In (optional)

slot 4 slot 2

slot 3 slot 1
IDE-drives 1/2 Fan 1 Loudspeaker Intrusion Additional Power supply
1= 2= 3= 4= Left audio input Analog GND Analog GND Right audio input

Battery

Optionale Komponenten / Optional components External connectors front RiserCard (optional) 1 = PCI slot = PCI slot 2 External connectors rear

Line - in - out

A26361-D2164-Z140-1-7419 A26361-D2168-Z140-1-7419
A26361-D2164-Z110-1-7419, Ausgabe 1
List of onboard features Chipset Board size VGA Audio / 6-channel / S/PDIF Buzzer / int. Speaker Support LAN 1 Gbit / 100 Mbit / 10 Mbit / Broadcom / Intel LAN ASF / AoL / WoL / Boot Serial ATA2 / ATA / RAID FireWireTM / USB 2.0 FAN monitored PSU** / CPU (FAN1) / AUX1 (FAN2) / AUX2 (FAN3) FAN controlled PSU** / CPU (FAN1) / AUX1 (FAN2) / AUX2 (FAN3) TEMP monitored CPU/ONB1/ONB2/HDD SmartCard SystemLock (USB / serial) Fujitsu Siemens Computers Keyboard Power Button Support List of special onboard features Silent Fan / Silent Fan LT System Guard / Silent Drives Recovery BIOS / Desk Update / Multi Boot / Safe Standby HDD Password / USB Security Logo Boot / Intel On Screen Branding
** not supported by standard Power Supplies
D2164-A Intel 945G Proprietary /-/-/ / / /-/ / -/ / / / / / / //// / / ///
D2168-A Intel 945G Proprietary /-/-/ / /-/ / -/ / / / / / / //// /-/ / /

// / / / / / /

// / / / /
Special Features Green Edition Silent Fan System Guard Silent Drives Safe Standby Recovery BIOS Desk Update Multi Boot HDD Password USB Security Halogen-free and lead-reduced product Independent temperature related processor and fan supervision and control View and adjust Silent Fan Noise reduction for optical and hard disk drives Prevents data loss in S3 (Save-to-RAM) Restores a disrupted BIOS Simple driver update with DU CD Comfortable boot from any boot device Access protection for ATA5/ATAPI5 hard disk drives Access protection with Memory Bird from Fujitsu Siemens Computers
Power Supply Requirements - for onboard components (worst case)

Source

Main Power Supply Aux. Power Supply

Voltage

+ 12 V - 12 V +5V + 3.3 V +5V

Maximal variation

+/- 5 % +/- 10 % +/- 5 % +/- 5 % +/- 5 %

Detaillierte Informationen zum BIOS-Update unter DOS finden Sie im Handbuch zum "BIOS-Setup" (CD "Drivers & Utilities").
2. BIOS-Update unter Windows mit dem Utility DeskFlash Ein BIOS-Update kann mit dem Utility DeskFlash auch direkt unter Windows durchgefhrt werden. DeskFlash befindet sich auf der CD "Drivers & Utilities" (unter DeskUpdate).

6 - Deutsch

Information about boards Be sure to observe the following for boards with ESD: You must always discharge static build up (e.g. by touching a grounded object) before working. The equipment and tools you use must be free of static charges. Remove the power plug from the mains supply before inserting or removing boards containing ESDs. Always hold boards with ESDs by their edges. Never touch pins or conductors on boards fitted with ESDs.
An overview of the features is provided in the data sheet.

Special features

Your mainboard is available in different configuration levels. Depending on the configuration, your mainboard is equipped with or supports special features. This manual describes the most important properties of this mainboard. Additional information on mainboards is contained in the manual "Basic information on mainboard" on the "User Documentation" or "OEM Mainboard" CDs, or on the Internet.
Interfaces and connectors
The location of the interfaces and connectors of your mainboard is specified at the beginning of the manual. The components and connectors marked are not necessarily present on the mainboard.

External ports

The location of the external connections of your mainboard is specified at the beginning of the manual. PS/2 keyboard port, purple Parallel port/Printer, burgundy Serial interface, turquoise PS/2 mouse port, green

LAN port (RJ-45)

Microphone jack (mono), pink
Monitor port, blue Audio input (Line in), light blue
USB - Universal Serial Bus, black Audio output (Line out), light green
A26361-D2164-Z110-1-7419, edition 1

English - 1

Installing/removing or replacing processor (with heat sink)
Disconnect the system from the mains voltage before performing any of the tasks described below. Details are contained in the operating manual of your system.

Technical data Intel Pentium 4 with 533, 800 or 1066 MHz front side bus in the LGA775 design Intel Celeron D with 533 MHz Front Side Bus in the LGA775 design A current list of the processors supported by this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.
Never touch the underside of the processor. Even minor soiling such as grease from the skin can impair the processor's operation or destroy the processor. Place the processor in the socket with extreme care, as the spring contacts of the socket are very delicate and must not be bent. If one or more spring contacts are bent do not insert the processor in any case as it may be damaged by doing so. Please contact the responsible vendor. Remove the heat sink.
The processor socket ist covered with a protective cap to protect the spring contacts In a warranty case the mainboard can only be taken back by Fujitsu Siemens Computers with the protective cap secured! Press down the lever and unhook it. Fold up the frame. Hold the processor between your thumb and index finger and insert it into the socket (b) so that the marking of the processor is aligned with the marking on the socket (a). Fold down the frame. Press the lever downward until it is hooked in again. Remove the protective cap and keep it.
Please note that, depending on the heat sink used, different heat sink mounts are required on the mainboard.
Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it. Secure the heat sink - depending on the model - with four screws or push it into the mounts.

2 - English

Installing/removing or replacing main memory
Technical data Technology: Size: Granularity: DDR/ DDR/ DDRunbuffered DIMM modules 240-Pin; 1.8 V; 64 Bit, no ECC 256 MB to 4 GB DDR2 256, 512 or 1024 Mbyte for one socket
A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards. At least one memory module must be installed. Memory modules with different memory capacities can be combined.
You may use only unbuffered 1.8 V memory modules without ECC. DDR2-memory modules must meet the PC2-3200U, PC2-4200U or PC2-5300U specification. If you use more than one memory module, then make sure to distribute the memory modules over both memory channels. By doing this you use the performance advantages of the dual-channel mode. The maximum system performance is given when the same memory size is used in Channel A and Channel B. To simplify equipping, the slots are colour coded. With a memory configuration of 4 Gbytes the visible and usable main memory can be reduced down to 3 Gbytes (depending on the system configuration).

Number of inserted memory modules slot to be used Channel A, slot 1 Channel A, slot 3 Channel B, slot 2 Channel B, slot 4 The installation/removal is described in the "Basic information on mainboard" manual. X 1 X 2 X 3 X X X 4 X X X X

English - 3

PCI bus interrupts - Selecting correct PCI slot
Extensive information on this section is contained in the manual "Basic information on mainboard". To achieve optimum stability, performance and compatibility, avoid the multiple use of ISA IRQs or PCI IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all involved devices and their drivers must support IRQ sharing.
Which ISA IRQs are assigned to the PCI IRQ Lines is normally automatically specified by the BIOS (see "BIOS Setup" description). Monofunctional expansions cards PCI/PCI Express expansion cards require a maximum of one interrupt, which is called the PCI interrupt INT A. Expansion cards that do not require an interrupt can be installed in any desired slot. Multifunctional expansion cards or expansion cards with integrated PCI-PCI bridge These expansion cards require up to four PCI interrupts: INT A, INT B, INT C, INT D. How many and which of these interrupts are used is specified in the documentation provided with the card. The assignment of the PCI interrupts to the IRQ Lines is shown in the following table: D2164 Controller or slot INT Mechanical slot On board controller PCI INT LINE 1 (A) 2 (B) 3 (C) 4 (D) 5 (E) 6 (F) 7 (G) 8 (H) HD Audio USB 2.0 SMBus USB 1.1 1

4 - English

Use first PCI/PCI Express slots that have a single PCI IRQ Line (no IRQ sharing). If you must use another PCI/PCI Express slot with IRQ sharing, check whether the expansion card properly supports IRQ sharing with the other devices on this PCI IRQ Line. The drivers of all cards and components on this PCI IRQ Line must also support IRQ sharing.

English - 5

BIOS update
When should a BIOS update be carried out? Fujitsu Siemens Computers makes new BIOS versions available to ensure compatibility to new operating systems, new software or new hardware. In addition, new BIOS functions can also be integrated. A BIOS update should always also be carried out when a problem exists that cannot be solved with new drivers or new software. Where can I obtain BIOS updates? The BIOS updates are available on the Internet at www.fujitsu-siemens.com/mainboards. How does a BIOS update work? You have two ways of doing this: 1. BIOS update under DOS with bootable BIOS update floppy disk - brief description Download the update file from out website to your PC. Insert an empty floppy disk (1.44 Mbyte). Run the update file (e.g. 2164103.EXE). A bootable update floppy disk is created. Leave this floppy disk in the drive. Restart the PC. Follow the instructions on screen.

Detailed information on the BIOS update under DOS is provided in the manual on "BIOS Setup" ("Drivers & Utilities" CD).
2. BIOS update under Windows with DeskFlash utility A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash is contained on the "Drivers & Utilities" CD (under DeskUpdate).

6 - English

doc1

Interne Anschlsse und Steckpltze / Internal connectors and slots
1= 2= 3= 4= 5= 6= 7= 8= 9= 10 = 11 = 12 = 13 = 14 = 15 = 16 = 17 = 18 = 19 = 20 = 21 =

PCI Express x16

PCI Express x1
Diskettenlaufwerk / Floppy disk drive Stromversorgungsberwachung / Power supply control Bedienfeld / Front panel Stromversorgung / Power supply IDE-Laufwerke 1/2 / IDE-drives 1/2 Serial ATA3 Serial ATA4 Serial ATA2 Serial ATA1 LCD-Anzeige / LCD Display Lfter 3 / Fan 3 Lfter 2 / Fan 2 USB Gehuseberwachung / Intrusion USB SMB S/PDIF-Anschluss / S/PDIF connector Audio-Anschlsse Vorderseite / Audio port front Audio in Zustzliche-Stromversorgung / additional power supply Lfter 1 / Fan 1
Externe Anschlsse / External connectors

Channel A slot 3 slot 1

Channel B slot 4 slot 2
Optionale Komponenten / Optional components Bedienfeld / Front panel
Power On/Off Reset Message LED Power On HD-LED LED 2) Recovery Password Speaker 1) Both connector positions possible 2) 2pin or 3pin connector possible 1)

Umschlag/Cover

Contents
bersicht/Overview Mainboard D1931 Mainboard D1931.....1 Notational conventions....1 Important notes....2 Information about boards....2 List of features.....3 Special features....5 Brief instructions on installing mainboard...7 Prior to installation....7 Interfaces and connectors....9 External ports....9 LAN connector.....9 Graphics port.....10 Internal ports and connectors....10 Hard disk connection....10 Audio front panel.....11 Pin assignment of internal ports...12 Jumper settings.....18 Add-on modules / Upgrading....19 Replacing processor....19 Installing processor with heat sink...19 Upgrading main memory.....22 Adding PCI Express cards....24 Adding PCI cards.....24 PCI bus interrupts - Selecting correct PCI slot...24 Replacing the lithium battery....26 BIOS update....27 BIOS Recovery - Recovering System BIOS...28 Microcode Update....29 Drivers.....30 Annex.....31 Electrical Properties....31 APM and ACPI system status, energy-saving modes...32 Mainboard Revision and BIOS Version....33 Error messages.....34 Glossary.....38

-/! -/! !/!/!/! -/! -/!

4/2 2/1/1 -/!

English - 3

Internal ports (continued) Front panel Audio (9-pin for headphone, microphone) AC'97 / High Definition Audio (Azalia) FireWireTM * (9-Pin, Intel standard header) USB Ports* (2.0, ~480 MB/s) Serial Ports* (FIFO, 16550 compatible) Fan Connectors PSU** / CPU (FAN1) / AUX1 (FAN2) / AUX2 (FAN3) SMBus Connector* (Case Temperature) Cover monitoring* (Casing open) BTX (24-pin) / ATX12V (20-pin) power supply External ports VGA Audio Mic. In / Line in / Line out (or configurable with driver) Audio Surround / Rear Surround / Center LFE S/PDIF (digital audio, cinch)* OUT / IN S/PDIF (digital audio, optical) OUT LAN (RJ-45) PS/2 mouse/keyboard FireWire * (6-Pin, IEEE 1394 port) USB Ports (2,0, ~480 MB/s) Serial Ports (RS232, FIFO, 16550 compatible) Parallel Port (EPP/ECP)
* ** for use with internal devices or optional Front or Rear panel not supported by standard power supplies

D1931-A 1/4 -/1/1/1/1

1 1/1/1 -/-/-/1 1/1 1

4 - English

Special features
Your mainboard is available in different configuration levels. Depending on the configuration, your mainboard is equipped with or supports the features described in the following. Silent Fan LT A controller regulates the processor fan in the PC and thus prevents unnecessary noise pollution. The controller operates independently of the operating system and the processor.
Silent Drives Hard disks and optical drives (CD-ROM, CD-RW, DVD etc.) are besides the fans some of the greatest sources of noise in a PC. The BIOS-Setup can be used to switch these drives into a quieter mode.
Recovery BIOS If an error occurs during a BIOS update (e. g. due to a power failure), the system BIOS will be destroyed. All Fujitsu Siemens Computers mainboards are equipped with a recovery BIOS. With it a destroyed BIOS can easily be restored. Exact instructions are provided in the chapter "BIOS Recovery - Recovering System BIOS".
DeskUpdate DeskUpdate enables simple, automatic driver installation. The function is available both on the CD "Drivers & Utilities" and on the Internet.

Multi Boot The BIOS of the Fujitsu Siemens Computers mainboards enables booting from all types mass storage devices. In addition to IDE hard disks, this also includes optical drives, such as CD-ROM, DVD and external drives that can be connected to USB or FireWire.
USB Security USB Security is a BIOS function that offers protection against unauthorised access regardless of the operating system used. If USB Security is activated, the system can only be started, if the MemoryBird of Fujitsu Siemens Computers is connected to one of the existing USB-ports.

English - 5

Safe Standby With Safe Standby the content of the main memory is saved to the hard disk when the PC switches into the Standby mode. In case of an unexpected power failure, the content of the main memory is loaded during booting from the hard disk. Additional information is available on the Internet at www.fujitsusiemens.com/manageability.

6 - English

Brief instructions on installing mainboard
If you have purchased a separate mainboard, you can install the mainboard in your system in accordance with the following brief instructions. The activities described here assume a basic knowledge of PCs and cannot be carried out by a layperson. If you are not sure whether you have the necessary specialised knowledge, then leave this work to an expert. The illustrations of the system show examples of possible cases.

Prior to installation

Please take note of the safety information in the "Important notes" chapter. Check whether the processor, memory modules and power supply are suitable for this mainboard: processor (see "Replacing processor" chapter). memory modules (see "Upgrading main memory" chapter). power supply (see "Electrical Properties" chapter).
Make sure the current requirement of the fans (processor, case) does not exceed the loadability of the fan connections (see chapter entitled "Electrical Properties"). First only install the components absolutely necessary (graphics card, processor and heat sink, one memory module) and only connect the required connections (power supply unit, case connections such as ATX on/off switch, hard disk or floppy disk drive). You should not install additional cards and devices until this minimum configuration successfully boots (see chapter entitled "Add-on modules / Upgrading").

Installation

Equip the mainboard with the processor, heat sink and memory modules before installation if possible. Further information can be found in "Replacing processor" chapter. Open the casing as described in the operating manual.

English - 7

Should no suitable connection field be provided in the case, then you must install the connection field (1) provided.

Screen resolution Depending on the operating system used, the screen resolutions in the following table refer to the mainboard screen controller. If you are using an external screen controller, you will find details of supported screen resolutions in the operating manual or technical manual supplied with the controller. Screen resolution 640 x x x x x x x 1536 Refresh rate (Hz) 75 Colour 32 bit 32 bit 32 bit 32 bit 32 bit 32 bit 32 bit
The positions of the internal ports and connectors are shown on the Cover. Additional information on some ports is also provided here.

Hard disk connection

An ultra ATA/66 or ultra ATA/100 hard disk must be connected with a cable especially designed for the ultra ATA/66 or ultra ATA/100 mode. Connect the end of the cable marked with blue to the mainboard. Connect the cable to the hard disk and to the connector on the mainboard. A serial ATA/150 hard disk must be connected with a serial ATA cable. If you have connected hard disks to serial ATA (one hard disk is possible per serial ATA connection), you must configure the respective settings in the BIOS Setup (further information you can find in the BIOS Setup manual).

10 - English

Audio front panel
If you want to use the internal connection for the audio front panel for the front side of the system, then proceed as follows: Remove all plug-in jumpers from the audio front panel connection. Connect the cable for the audio front panel.
If you connect audio devices on both the front and the back of the system, you can only use the connections Line out and Microphone once each. If you have connected audio devices to both Line out connections, only the connection on the front of the system is active. If you have connected audio devices to both Microphone connections, only the connection on the back of the system is active.

English - 11

Pin assignment of internal ports
The pin assignment of some internal connections is shown in English in the following.

Audio S/PDIF

Signal VCC SPDIF out GND

14 - English

Audio Input

Pin 3 4

Signal Left audio input Audio GND Audio GND Right audio input
Power control (system monitoring)

Pin 7 8

Signal Power Guard Control PS FAN Control PS FAN Sense

Audio port front

Signal Micro input Micro bias Right line output not connected Left line output

Pin 10

Signal Analogue GND Analogue VCC Right line return Key Left line return
If the audio front panel is not used, you must plug jumpers on pin pairs 5/6 and 9/10.

English - 15

USB - dual channel (Chipcard reader ready)

Pin 9 11

Signal Key VCC 1 or 3 Data negative 1 or 3 Data positive 1 or 3 GND Key

Pin 10 12

Signal Chipcard reader on or not connected VCC 2 or 4 Data negative 2 or 4 Data positive 2 or 4 GND not connected

Fan 1, 2 and 3

Signal GND +12 V Fan sense Fan Control

16 - English

Power supply BTX

(ATX compatible)

Pin Signal +3,3 V (P3V3P) +3,3 V (P3V3P) GND +5V (VCC) GND +5V (VCC) GND Powergood (high asserted) +5 V Auxiliary (VCC Aux) +12 V (P12VP) +12 V (P12VP) Pin Signal +3,3 V (P3V3P) -12 V (P12VN) GND PS on (low asserted) GND GND GND -5 V (P5VN) +5 V (VCC) +5 V (VCC) +5 V (VCC) GND
Additional power supply ATX12 V

Pin 1 3

Signal GND +12 V

Pin 2 4

English - 17

Jumper settings

Your mainboard is equipped with jumpers. The positions of the jumpers are shown on page "Cover".
Setting via control-panel plug connector
Pin pair A inserted = Skipping system and BIOS Setup password Pin pair B inserted = System BIOS recovery Pin pair C inserted = factory setting
Please pay attention on the exact position of the pin pairs!
Skipping system and BIOS Setup password - pinpair A
Pinpair A enables skipping the system and BIOS Setup password. Inserted not inserted System and BIOS Setup password must be entered when the device is switched on.
Recovering System BIOS - pinpair B
System and BIOS Setup password are skipped when the device is switched on and may be changed.
Pinpair B enables recovery of the old system BIOS after an attempt to update has failed. To restore the old BIOS you need a Flash BIOS Diskette (see "BIOS update" chapter). Inserted not inserted Normal operation (default setting). The System BIOS executes from floppy drive A: and the inserted "Flash-BIOSDiskette" restores the System BIOS on the mainboard.

18 - English

Add-on modules / Upgrading !
Exit energy-saving mode, switch off the system and remove the power plug from the mains outlet, before carrying out any of the procedures described in this chapter! Even when you have run down the device, parts of the device (e.g. memory modules, PCI extension boards) are still energised.

Replacing processor

Technical data
Intel Pentium 4 with 533 or 800 MHz front side bus in the LGA775 design. Celeron with 800 MHz Front Side Bus in the LGA775 design A current list of the processors supported by this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.
Installing processor with heat sink
Never touch the underside of the processor. Even minor soiling such as grease from the skin can impair the processor's operation or destroy the processor. Place the processor in the socket with extreme care, as the spring contacts of the socket are very delicate and must not be bent. Remove the heat sink.
Press down the lever (1) and unhook it. Fold up the frame.

English - 19

Remove the old processor (2) from the socket.
Insert the new processor in the socket so that the marking of the processor is aligned with the marking on the socket (a).
Fold down the frame (1). Press the lever downward (2) until it is hooked in again (3).

20 - English

Mounting heat sink
Be sure to use heat conducting material between the processor and the heat sink. If a heat conducting pad (rubber-like foil) is already applied to the heat sink, then use it. Otherwise you must apply a very thin layer of heat conducting paste. Heat conducting pads can only be used once. If you remove the heat sink, you must clean it and apply new heat conducting paste before you remount it. Please note that, depending on the heat sink used, different heat sink mounts are required on the mainboard.
Depending on the configuration variant, you must pull a protective foil off the heat sink or coat the heat sink with heat conducting paste before fitting it. Secure the heat sink - depending on the model - with four screws or push it into the mounts.

English - 21

Upgrading main memory
Technology: Size: Granularity:
DDR 333 or DDR 400 unbuffered DIMM modules 184-Pin; 2.5 V; 64 Bit, no ECC 128 Mbytes to 4 Gbyte DDR 333 SDRAM 128 Mbytes to 4 Gbyte DDR 400 SDRAM 128, 256, 512 or 1024 Mbyte for one socket
A current list of the memory modules recommended for this mainboard is available on the Internet at: www.fujitsu-siemens.com/mainboards.
At least one memory module must be installed. Memory modules with different memory capacities can be combined.
You may only use unbuffered 2,5 V memory modules. Buffered memory modules are not supported. DDR-DRAM memory modules must meet the PC2700 or PC3200 specification. The mainboard has two memory channels (channel A and channel B) with two slots each (slot 1 and 3 or slot 2 and 4). If you use more than one memory module, then make sure to distribute the memory modules over both memory channels. By doing this you use the performance advantages of the dual-channel mode. The maximum system performance is given when the same memory size is used in Channel A and Channel B. To simplify equipping, the slots are colour coded. With a memory configuration of 4 Gbytes the visible and usable main memory can be reduced down to 3 Gbytes (depending on the system configuration).

slot 4 slot 3

Channel B Channel A

slot 2 slot 1

22 - English
Installing a memory module
Push the holders on each side of the memory slot outwards. Insert the memory module into the location (1). At the same time flip the lateral holders upwards until the memory module snaps in place (2).

Removing a memory module

Push the clips on the right and left of the memory slot outward (1). Pull the memory module out of the memory slot (2).

English - 23

Adding PCI Express cards
The PCI Express x16 slot is intended for graphics cards, and the PCI Express x1 slot for PCI Express x1 cards.

Adding PCI cards

Technical data: 32 bit / 33 MHz PCI slots 5 V and 3.3 V supply voltage 3.3 V auxiliary voltage
PCI bus interrupts - Selecting correct PCI slot
To achieve optimum stability, performance and compatibility, avoid the multiple use of IRQ Lines (IRQ sharing). Should IRQ sharing be unavoidable, then all involved devices and their drivers must support IRQ sharing.
IRQ Lines connect PCI/PCI Express slots and onboard components to the interrupt controller. IRQ Lines are permanently wired on the mainboard. Which IRQs are assigned to the IRQ Lines is normally automatically specified by the BIOS (see description in "BIOS Setup").

Where can I obtain BIOS updates?
The BIOS updates are available on the Internet at www.fujitsu-siemens.de/mainboards.
How does a BIOS update work?
You have two ways of doing this:
1. BIOS update under DOS with bootable BIOS update floppy disk - brief description
Download the update file from out website to your PC. Insert an empty floppy disk (1.44 MB). Run the update file (e.g. 1931103.EXE). A bootable update floppy disk is created. Leave this floppy disk in the drive. Restart the PC. Follow the instructions on screen.
Detailed information on the BIOS update under DOS is provided in the manual on "BIOS Setup" ("Drivers & Utilities" CD).
2. BIOS update under Windows with DeskFlash utility
A BIOS update can also be carried out directly under Windows with the DeskFlash utility. DeskFlash is contained on the "Drivers & Utilities" CD (under DeskUpdate).

English - 27

BIOS Recovery - Recovering System BIOS
All BIOS settings are reset to the default values.
Open the casing as described in the operating manual. Set the switch for "Restore system BIOS" to ON. Close the casing as described in the operating manual. Insert a BIOS update floppy disk and start the PC. Note the signals issued from the loudspeaker. You have successfully restored the BIOS if you hear the signal sequence "short-short- long- long- long" and the diskette access indicator is dark. This can take a few minutes. Open the casing as described in the operating manual. Set the switch for "Restore system BIOS" to OFF. Close the casing as described in the operating manual. Remove the floppy disk from the drive. Start the PC and invoke BIOS Setup. Select the menu item Reset Configuration in the menu Advanced and change the setting to Yes. Save the change and terminate BIOS Setup.
The BIOS recovery has now been completed. The system restarts.
Detailed information on the BIOS recovery is contained in the manual "BIOS Setup" ("Drivers & Utilities" CD).

28 - English

Microcode Update
What is a microcode update? As there are no drivers for processors, Intel offers the possibility from the P6 family (Pentium Pro) on to update the command set (microcode) of the processor. This enables minor errors to be corrected and the performance to be increased.

2000 mA

The fuses on this mainboard can be used several times (polyfuses). Shortly after the error state has been eliminated, the fuses reset to the original state.
Mainboard current requirement
You require a Pentium4 power supply unit according to the BTX or ATX12V specification (BTX: 24pin + 4-pin connection; ATX12V: 20-pin + 4-pin connection) for this mainboard. If you use an ATX power supply, a graphics card in the PCI Express x16 slot will only be supplied with 25 W of power. For high-end graphics cards that require a power supply of up to 75 W, a BTX power supply unit is required. If you do not have a PC from Fujitsu Siemens Computer, make sure that the power supply unit provides the required amperages. Resource BTX/ATX12V power supply BTX/ATX12V power supply BTX/ATX12V power supply BTX/ATX12V power supply Standby voltage of power supply unit Voltage +12 V -12 V +5,0 V +3,3 V +5,0 V Maximum difference 5 % 10 % 5 % 5 % 5 % 2A Maximum current

English - 31

APM and ACPI system status, energy-saving modes
The specifications apply to the onboard components and represent the least favourable case. In addition, at least 350 mA is required for PCI on 3.3 V, and 500 mA per connected device for USB on 5 V.
System status ACPI Status )1 APM Status Power LED )2 Power LED )3 Power consum ption Wake-up time
Normal operation Simple energy saving mode Maximum energysaving mode )4 "Save to DRAM" Maximum energysaving mode ** "Save To Disk" Soft Off" Mechanically Off )1 )2 )3 )4

On Standby

On/Off Off/On

On flashin g flashin g

Normal Almost like normal RAM, wake-up compone nts RAM, wake-up components Nearly zero Zero Almost immediate ly ca. 5s

Off/On

Off/Off

ca. 20s

Soft Off Off

Off/Off Off/Off

Off Off
Full boot time Full boot time
G = Global status; S = System status Two colours One colour The power supply unit must provide sufficiently loadable 5 V standby voltage.
To use the WOL functionality the power supply must provide a 5 V auxiliary voltage (5VSB) of at least 1 A.

32 - English

Mainboard Revision and BIOS Version
The compatibility, e.g. with new processors, can be independent of the BIOS version or the revision status of the mainboard used. The CPU and BIOS compatibility lists are available on the Internet at www.fujitsu-siemens.de/mainboards.

Mainboard Revision

The revision status of the mainboard exactly identifies which mainboard you have. It is indicated on a sticker on the edge of the mainboard:

D1931-A21 GS 1 05618476

Example Mainboard-Revision

BIOS version

The BIOS version can be displayed in the BIOS Setup. Press F2 during booting to open the BIOS Setup. Press F1.
The BIOS version is specified on the displayed information page under the entry BIOS Release.

English - 33

Error messages
This chapter contains error messages generated by the mainboard.
Available CPUs do not support the same bus frequency - System halted! Memory type mixing detected Non Fujitsu Siemens Memory Module detected - Warranty void There are more than RDRAM devices in the system
Check whether the system configuration has changed. If necessary, correct the settings.
BIOS update for installed CPU failed
This message appears if the microcode update required for the connected processor is not contained in the system BIOS. Boot the system with the inserted Flash BIOS floppy disk. Abort the normal Flash BIOS update by answering the question about whether you want to perform the update with
To carry out the Flash BIOS update for the processor, enter:

flashbio/p6

Check date and time settings
The system date and time are invalid. Set the current date and time in the Main menu of the BIOS Setup.

CPU ID 0x failed

Switch the server off and on again. If the message is still displayed, go into the BIOS setup and set the corresponding processor to Disabled in the Server - CPU Status menu; please contact your sales outlet or customer service centre.

CPU mismatch detected

You have replaced the processor or changed the frequency setting. As a result, the characteristic data of the processor have changed. Confirm this change by running the BIOS Setup and exiting it again.
Diskette drive A error Diskette drive B error
Check the entry for the diskette drive in the Main menu of the BIOS Setup. Check the connections to the diskette drive.

34 - English

DMA test failed EISA CMOS not writable Extended RAM Failed at offset: nnnn Extended RAM Failed at address line: nnnn Failing Bits: nnnn Fail-Safe Timer NMI failed Multiple-bit ECC error occurred Memory decreased in size Memory size found by POST differed from EISA CMOS Single-bit ECC error occurred Software NMI failed System memory exceeds the CPUs caching limit System RAM Failed at offset: nnnn Shadow RAM Failed at offset: nnnn

Switch the device off and on again. If the message is still displayed, please contact your sales outlet or customer service centre.
Failure Fixed Disk 0 Failure Fixed Disk 1 Fixed Disk Controller Failure
Check the entry for the hard disk drive in the Main menu and the entry for the IDE drive controller in the Advanced - Peripheral Configuration menu of the BIOS Setup. Check the hard disk drive's connections and jumpers.
Incorrect Drive A - run SETUP Incorrect Drive B - run SETUP
Correct the entry for the diskette drive in the Main menu of the BIOS Setup.

Invalid NVRAM media type

Invalid System Configuration Data
In the Advanced menu of the BIOS Setup set the entry Reset Configuration Data to Yes.
Invalid System Configuration Data - run configuration utility Press F1 to resume, F2 to Setup
This error message may be displayed if the machine was switched off during system start-up. Call BIOS Setup and switch to the Advanced menu. Select the menu item Reset Configuration Data and change the setting to Yes. Save the change and terminate BIOS Setup. Reboot the device.
Keyboard controller error
Connect another keyboard or another mouse. If the message is still displayed, please contact your sales outlet or customer service centre.

Keyboard error

Check that the keyboard is connected properly.
Keyboard error nn nn Stuck Key
Release the key on the keyboard (nn is the hexadecimal code for the key).

English - 35

Missing or invalid NVRAM token
Monitor type does not match CMOS - RUN SETUP
Correct the entry for the monitor type in the Main menu of the BIOS Setup.
On Board PCI VGA not configured for Bus Master
In the BIOS Setup, in the Advanced menu, submenu PCI Configuration, set the Shared PCI Master Assignment entry to VGA.
One or more RDRAM devices are not used One or more RDRAM devices have bad architecture/timing One or more RDRAM devices are disabled
Contact your system administrator or contact our customer service centre.
Operating system not found
Check the entries for the hard disk drive and the floppy disk drive in the Main menu and the entries for Boot Sequence submenu of the BIOS Setup.
Parity Check 1 Parity Check 2
Previous boot incomplete - Default configuration used
By pressing function key F2 you can check and correct the settings in BIOS Setup. By pressing function key F1 the system starts with incomplete system configuration. If the message is still displayed, please contact your sales outlet or customer service centre.

Real time clock error

Call the BIOS Setup and enter the correct time in the Main menu. If the message is still displayed, please contact your sales outlet or customer service centre.
Service Processor not properly installed
The server management controller has not been correctly installed. If the message is still displayed, please contact your sales outlet or customer service centre.
Storage Extension Group = xy Configuration error, x Storage Extensions(s) found, configured are y SE(s). Device List: k1, k2.
The specified number of storage expansion units (SEs) in the BIOS Setup menu Server - Storage Extensions - Number of connected SE is incorrect. Check how many SEs within the group are connected at the server and change the setting in BIOS Setup. Check whether you have assigned the same device ID twice. xy = Group number x = Number of SEs found on the communication bus y = Number of SEs entered in Number of connected SE k1, k2. = Device ID of the storage extensions found

36 - English

System battery is dead - Replace and run SETUP
Replace the lithium battery on the mainboard and redo the settings in the BIOS Setup.
System Cache Error - Cache disabled
System CMOS checksum bad - - Default configuration used
Call the BIOS Setup and correct the previously made entries or set the default entries.
System Management Configuration changed or Problem occurred
A system fan or system sensor has failed. Check the hardware operation.

System timer error

Uncorrectable ECC DRAM error DRAM Parity error Unknown PCI error
Verify CPU frequency selection in Setup
The frequency setting for the processor is invalid. Correct the BIOS Setup and the setting.

English - 37

Glossary
The technical terms and abbreviations given below represent only a selection of the full list of common technical terms and abbreviations. Not all technical terms and abbreviations listed here are valid for the described mainboard. IAPC AC'97 ACPI AMR AOL APM ASF ATA BIOS BMC CAN CNR CPU C-RIMM DIMM ECC ECP EEPROM Audio Codec '97 Advanced Configuration and Power Management Interface Audio Modem Riser Alert On LAN Advanced Power Management Alert Standard Format Advanced Technology Attachment Basic Input Output System Baseboard management controller Controller Area Network Communication Network Riser Central Processing Unit Continuity Rambus Inline Memory Module Dual Inline Memory Module Error Correcting Code Enhanced Capability Port Electrical Erasable Programmable Read Only Memory Enhanced Parallel Port Floppy disk controller First-In First-Out Front Side Bus Firmware Hub Graphics and Memory Controller Hub Graphics Performance Accelerator Hard Disk Drive Inter Integrated Circuit SIMD SB SDRAM SGRAM ICH IDE IPSEC LAN LFE LSA MCH MMX P64H PCI PCI Express PSB PSU PXE RAID RAM RAMDAC RDRAM RTC S/PDIF SATA Instantly Available Power Managed Desktop PC Design I/O Controller Hub Intelligent Drive Electronics Internet Protocol Security Local Area Network Low Frequent Effects LAN Desk Service Agent Memory Controller Hub MultiMedia eXtension PCI64 Hub Peripheral Component Interconnect Peripheral Component Interconnect Express Processor System Bus Power Supply Unit Preboot eXecution Environment Redundant Array of Independent Disks Random Access Memory Random Access Memory Digital Analogue Converter Rambus Dynamic Random Access Memory Real Time Clock Sony/Philips Digital Interface Serial Advanced Technology Attachment Soundblaster Synchronous Dynamic Random Access Memory Synchronous Graphic Random Access Memory Streaming Mode Instruction (Single Instruction Multiple

 

Tags

SRU5150-87 XP500-2006 NP-N150-jp01 VR550 58 Mk II MFC10 GT-E1360B Yamaha FC9 42LG30DC MGB100 XD6320 RZ1710 NWZ-E453K P805J JBL Duet Scpt470 Dirt DOG Camcorder Volvo C30 Uk PS B23 2450-S402 Samsung ES65 DS-4000 Ironman Voyager PRO Subwoofer DPL930VD-DVD Digitech RP55 M317 M318 Zywall 35 AW1018T Caplio R2 291320-10-PIO-K P5Q Se2 DJM-3000 RR-QR200 EG-101 FLN608 C-5000zoom Carnival AX4PER TCS6550E YO-P20 R1910 4600C TC-KE600S UE-55C6700 CDX-646 SGH-T479B Dogs Life 50PC5R-MA SSE-UMB-100 LC-240C SA-DX950 DCR-TRV900E ICN510 WD-80490TP Integrated-homelink-transciever SU-X977 PRO 8 Vivicam 2850 CDM7075 DSC-T90 P 1 2 PN58C550g1F Twinset CME UF Companion WD-60738 ES-4124 DVP-S715 Ixtreme 6003 TEW-431BRP GL315 CSH-5L F14C4N Review UE32C5000QW ZWF-1211W EPL-N2120 MP-11X 601-602-604 Monitor MCM204 3050codes VN-960PC NWZ-B103F 220VW8FB Systems 1020 1D Krups 580 Router DCD-F100 YZF-R1-2004 Pctv 100E UN32C5000QM P2370H Garmin 200W Os 9 L60600

 

manuel d'instructions, Guide de l'utilisateur | Manual de instrucciones, Instrucciones de uso | Bedienungsanleitung, Bedienungsanleitung | Manual de Instruções, guia do usuário | инструкция | návod na použitie, Užívateľská príručka, návod k použití | bruksanvisningen | instrukcja, podręcznik użytkownika | kullanım kılavuzu, Kullanım | kézikönyv, használati útmutató | manuale di istruzioni, istruzioni d'uso | handleiding, gebruikershandleiding

 

Sitemap

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101