INSTRUCCIONES EN ESPAOL INCLUIDAS
Getting started Recording Playing discs
Please read before using this equipment. If you need additional operating assistance after reading this owners manual or to order replacement accessories, please call or visit our web site at http://www.funai-corp.com
Connection to a TV (Before you use this unit, you need to complete connections.)
If your TV has AUDIO/VIDEO input jacks, see the section Connections on pages 1315. If not, it is still possible to connect this unit to your TV by using a STEREO AUDIO/VIDEO RF modulator (commercially available). In this case, follow the instructions below. 1)The antenna input jack of your TV may have been already occupied. If so, disconnect the RF cable from your TV, and then connect the RF cable to the ANTENNA IN jack of this unit. 2)Connect the ANTENNA OUT jack of this unit to your RF modulator (usually marked ANT IN) by the RF cable. 3)Connect your RF modulator to your TV by another RF cable. 4)Connect the AUDIO/VIDEO output jacks of this unit to the AUDIO/VIDEO input jacks of your RF modulator by audio and video cables. 5)Set your RF modulators channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a Modulator/Antenna switch, set it according to your RF modulators manual. 6)Turn on your TV and choose the same channel as you set the RF modulators channel 3/4 switch to. For more details, follow the instructions supplied with the RF modulator.
TOLL FREE : 1 800-605-8453
Editing Changing the Setup menu

Cable Antenna TV signal

(Back of This Unit)
Audio/Video cables (supplied)
Turn on your TV and select channel 3 or 4.

AC 120V ANT IN

Set channel 3 or 4.
CHANNEL TO TV AUDIO IN VIDEO IN R L

Others

(Back of TV)
The quality of picture may become poor if this unit is connected to an RF modulator.
STEREO AUDIO/VIDEO RF Modulator (commercially available)
Antenna in jack RF cable 3 (commercially available)

Espaol

To record a program easily, refer to Easy DVD recording on pages 16-17 after connections are completed. (You CANNOT record on any copyright protected DVD disc with this unit.)

Precautions

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you are allowed to experience the theater surround sound from discs with surround sound system.
Setting pictures for thumbnails:
You can change pictures for thumbnails.
Dividing titles (DVD+RW/DVD-RW only):
You can divide a title into two or more.

Putting name on disc:

You can put your favorite disc name.
Compatibility Available for playing discs on a regular DVD player: Recorded discs can be played on regular DVD players, including computer DVD drives compatible with DVD-Video playback. You will need to finalize the discs recorded on DVD+R/DVD-RW/DVD-R discs to play in other DVD players. Others Progressive Scan system
Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals.
Getting started Recording
Symbol in this Owners Manual
To specify for what disc type each function is, we put the following symbols at the beginning of each item to operate. *DVD-RW (VR mode) disc is not played in this unit.

Playing discs

Symbol
DVD-V DVD+RW DVD+R DVD+R DVD-RW

+VR DL

Description Available to DVD-Video discs Available to DVD+RW discs Available to DVD+R discs Available to DVD+R DL discs
Changing the Setup menu Editing
Quick search for what you want to watch:
You can easily find the part you want to watch using the search function. Search for a desired point on a disc by title, chapter or time.

Virtual Surround System:

You can enjoy stereophonic space through your exciting 2 channel stereo system.
Playing back on MP3 disc:
You can enjoy MP3 files which are recorded on

CD-R/RW.

Editing Deleting titles:
You can delete titles which you do not need anymore.
Available to DVD-RW discs formatted with DVD+VR mode +VR Available to DVD-R discs formatted DVD-R with DVD+VR mode Video Available to DVD-RW discs DVD-RW (Video mode, Finalized) Video Available to DVD-R discs DVD-R (Video mode, Finalized)

CD MP3

Putting names on titles:
Available to Audio CDs Available to CD-R/RW discs with MP3 files Available to Video CDs
You can put your favorite names on titles.

1. 2. 3. 4. 5. 6.

ANTENNA IN jack Use to connect an antenna. VIDEO IN jack (EXT1) Use to connect external equipment with a standard video cable. VIDEO OUT jack Use to connect a TV monitor, AV receiver or other equipment with a standard video cable. AC Power Cord Connect to a standard AC outlet to supply power to this unit. COAXIAL DIGITAL AUDIO OUTPUT jack Use to connect an AV receiver, Dolby Digital decoder or other equipment with a coaxial digital input jack with a digital coaxial cable. AUDIO OUT jacks Use to connect a TV monitor, AV receiver or other equipment with a standard audio cable.
7. COMPONENT VIDEO OUTPUT jacks Use to connect a TV monitor with component video inputs with a component video cable. 8. S-VIDEO OUT jack Use to connect the S-Video input of a TV monitor, AV receiver or other equipment with an SVideo cable. 9. S-VIDEO IN jack (EXT1) Use to connect the S-Video output of external equipment with an S-Video cable. 10. AUDIO IN jacks (EXT1) Use to connect external equipment with a standard audio cable. 11. ANTENNA OUT jack Use to connect an antenna cable to pass the signal from the TV ANTENNA IN to your TV monitor.

Recording Playing discs

Note Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. This unit does not have the RF modulator.
Editing Changing the Setup menu Others Espaol
13. REC I button Press once to start a recording. Press repeatedly to start a One-Touch Timer Recording. 14. RAPID PLAY button During playback, press to playback in a slightly faster/ slower mode with keeping the audio quality. 15. DISPLAY button Press to display the Display menu on or off. 16. OPEN/CLOSE A button* Press to open or close the disc tray. 17. CM SKIP button During playback, press to skip 30 seconds. 18. NEXT G button During playback, press to skip to the next chapter or track. Or when playback is paused, press to play forward step by step. 19. FWD D button During playback, press to play fast forward. Or when playback is paused, press to play slow forward. 20. PAUSE F button Press to pause play or recording. 21. TITLE button Press to display the Title list. 22. SETUP button Press to display the Setup menu. During DVD playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 23. TIMER PROG. button Press to display the Timer programming list. 24. CHANNEL - / + buttons Press to change the channel up and down.

1. JAN/01 12:57AM 2. ---------

3. 4. 5.

6. --Check the information on the --list7.you will need. 8. ---
Press [TIMER PROG.] to exit.
Press [STANDBY-ON ] to return to the timer standby mode.
To stop the Timer Recording in process Press [STOP C] on the front panel of the unit. [STOP C] on the remote control is not effective. If the timer program did not complete correctly, the error number appears in the Timer Programming list. Each error number means:

End CH Mode

Press [TIMER PROG.] to check the timer programming in process. When the Timer Recording is proceeding, that program will be highlighted with red. In this case, you cannot select any other program.

Date Start

JAN/01 12:57AM ---------------
E1-22 E37-39 E23-24 E25-26 E29 E30 E34 E35 E36 E40
Recording error other than below Unrecordable disc Copy prohibited program Disc protected Disc full No space for Control information PCA full

E41 E42

Power failed No disc when recording

2. 3. 4. 5. 6. 7. 8.

E43 E44
Already 49 titles recorded Already 254 chapters recorded
Press [CLEAR] to erase the selected program.
Copy prohibited program It is impossible to record additionally on a disc recorded by other units when setting Replace Disc Menu to OFF.
Already finalized Video E46 format disc Some portion has not been recorded because of program overlapping. Recording did not start at the start time.
E27,E28,E31,E32 and E33 are not displayed. A program with the error number is grayed and asterisked in the Timer Programming list. Once the Timer Programming list with error line(s) is displayed, or after canceling and setting again the timer standby mode, the program line(s) with error will be cleared.
Hints for Timer Recording
If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. If a disc is not on the tray, TIMER REC indicator flashes and Timer Recording cannot be performed. In some cases, TIMER REC indicator will be on momentarily around the start point as the unit attempts to record. Please insert a recordable disc. When all the Timer Recording is completed, TIMER REC indicator flashes. To play or eject the recorded disc, press [STANDBY-ON ] first, then select the recorded title and press [PLAY B] or [OPEN/CLOSE A]. During Timer Recording or timer standby mode (TIMER REC indicator will be on), any operations on the unit will not be available. To make these operations available, cancel the Timer Recording or timer standby mode first (TIMER REC indicator will be off). To cancel the timer standby mode, press [STANDBY-ON ]. When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end during the recording, the unit turns itself off. When the programmed Start and End time are earlier than the current time, the setting will not be accepted and be cleared for redoing. If the Start time is earlier and the End time is later than the current time, the recording will start right after you turn the power off.

Press [PLAY B] to start playback. Playback will start. If you are playing a DVD-Video disc or Video CD with PBC function, a menu may appear. Refer to page 41 for details about a disc menu. If you are playing a finalized DVDR/DVD-RW disc, a title list will appear.
Press [OPEN/CLOSE A] to open the disc tray. The disc tray will open.
Press [STOP C] to stop playback.
Some discs may start playback automatically. You can select images or information on the menu screen by activating PBC (Playback control) function (page 70).

Playing MP3 disc

In stop mode, press [TITLE] to call up the MP3 menu.

File List DISC NAME

Press [PLAY B], [OK] or [B] to move to the lower hierarchies. Press [s] or [RETURN] to the previous hierarchy. Hints for MP3 files: Folders are known as Groups, files are known as Tracks. Folders are accompanied by icon. MP3 files are accompanied by 3 icon. Reproduction will start from the selected track and go to the next one in turn. The system can recognize up to 255 groups (or folders) and up to 999 tracks. The name of group and track can be displayed in up to 29 characters. Unrecognizable characters will be replaced with asterisks. If there are no files in the folder, No Files will be displayed. We recommends the files recorded under the following circumstances is played back: Sampling frequency: 44.1kHz or 48kHz. Constant bit rate: 112kbps 320kbps.
FOLDER NAME 1 FOLDER NAME 2 FOLDER NAME 3 FOLDER NAME 4 FOLDER NAME 5 FOLDER NAME FILE NAME FILE NAME 2
To exit the menu, press [TITLE] again.
Press [K / L] to select a desired folder (group) or track. Press [OK]. When selecting track: Playback will start. When selecting the folder: The files in folder will appear. Press [K / L] to select the track or folder you want, then press [OK].
The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. Files whose extension is other than.mp3(MP3) will not be listed in the MP3 menu. Some unplayable folders or tracks may be listed in the MP3 menu due to the recording status.

Press [PLAY B].

For MP3 files, playback will resume from the beginning of the track at which playback was stopped. Some Video CDs with the PBC function resume playback from the beginning of the track.
Fast forward / Fast reverse
During playback, press [FWD D] or [REV E]. Every time you press [FWD D] or [REV E], approximate speed will be changed as follows. Fast forward or fast reverse playback across titles (for DVD discs) or tracks (for MP3) is not possible.

Normal speed playback

For Video CDs, approximate forward/reverse speeds are x2, x8, x16. For Audio CDs and MP3 files, approximate speed is fixed at x8 with sound. To return to the normal play, press [PLAY B].
Forward/reverse speed will be indicated with icons as follows. Forward (Approx. Speed) x2: x20: x40: Reverse (Approx. Speed) x5: x20: x40:
Skipping TV commercials during play
You can skip TV commercials by pressing [CM SKIP], so that you can enjoy the recorded programs without interrupting.
You can press up to 6 times (180 seconds). e.g. Press [CM SKIP] once.

CM Skip 30 sec.

During playback, press [CM SKIP]. Normal play will start at 30 seconds ahead from the point you press [CM SKIP]. Every time you press [CM SKIP], the searching point will be extended by 30 seconds ahead.

(forwarding 30 seconds)

Playback will restart automatically.

Special playback (contd)

Rapid play
Rapid Play function is available only during playback. Available only on discs recorded in the Dolby Digital format, Rapid Play plays back in a slightly faster/slower speed while keeping the sound quality just as normal playback.
: Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback. : Press [RAPID PLAY] three times to play back in normal speed. No effects.
Audio (language) setting cannot be changed while using this mode. This feature may not work at some point in a disc. Audio is PCM during Rapid play mode.
During playback, press [RAPID PLAY].

To return to the marker later: Using [K / L], select the desired marker number. Press [OK].

Search

Title/Chapter search
Using [PREV H] / [NEXT G]
During playback, press [NEXT G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. If there is no chapter in one title, the current title will be skipped. To go back to the beginning of the current title or chapter, press [PREV H]. Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one title at a time.

Using [DISPLAY]

Using [{ / B], select. Press [OK]. The number next to will be highlighted. Title: Using [K / L] or the Number buttons, enter a desired title number to search. Press [OK]. Title search will start. Chapter: Press [B] to move to the number next to for chapter. Using [K / L] or the Number buttons, enter a desired chapter number to search. Press [OK]. Chapter search will start.
Editing Changing the Setup menu Others
In search mode display, total numbers of each search contents (title/chapter/time) are shown as a denominator. Total number of titles Total number of chapters

01 /01

001/028

00:00:00/02:18:33

Total time of the disc

Search (contd)

Track search

CD Video CD MP3

During playback, press [NEXT G] to skip the current track and move to the next. The track will move forward one at a time. To go back to the beginning of the current track, press [PREV H]. Press it repeatedly to go to the previous track. The track will move backward one at a time.
During playback, press [DISPLAY]. Display menu will appear. <Audio CD>

1 0:00:00 Audio CD

<MP3 files>

1 0:00:00 MP3

During CD playback you can enter a track number directly using the Number buttons for track search without displaying the menu. Track search is not available when you play the Video CD with PBC function.
Using [{ / B], select. Press [OK]. The number next to will be highlighted.
Using [K / L] or the Number buttons, enter a desired track number to search. Press [OK]. Track search will start.

Using [K / L], select a desired audio channel. Press [OK]. Audio channel will switch.
1.Dolby Digital 5.1ch English 2.Dolby Digital 2ch French
Some discs will only allow you to change the soundtrack from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu. This unit CANNOT record in both stereo and SAP (Secondary Audio Program) at the same time.
Switching virtual surround system
You can enjoy stereophonic virtual space through your exciting 2 channel stereo system.

<DVD+RW>

1 playback, press [DISPLAY]. During
Display menu will appear.

OFF Type 1 Type 2

<Audio CD/MP3 files>

0:00:00 Audio CD

Using [{ / B], select. Press [OK]. Virtual Surround menu will appear. <DVD-Video>
Using [K / L], to select OFF, Type1 or Type2, then press [OK]. OFF: no effect Type1: natural effect Type2: emphasised effect
Select Virtual Surround OFF in a case sound is dissorted. The setting will be kept OFF when the unit is turned off. EN

Switching camera angles

Some DVD-Video discs feature scenes shot from two or more angles, check the case for details: it should be marked with Angle icon if it contains multi-angle scenes.
Using [{ / B], select. Press [OK]. Angle will switch each time you press [OK].
Angle icon appears when a switching camera angle is available.
Angle icon does not appear on the screen in a case you have selected Angle as OFF in the Display setting. Refer to pages 65-66.

Reducing block noise

Using [K / L], select a desired option. Press [OK]. Your setting will be activated. This function reduces noise in the playback picture. When playing back discs recorded in long time mode such as EP or SLP mode, select Type 1 or Type 2. (Type 2 is more effective.) When playing back discs with a few noises such as DVD-Video discs, select OFF.
Using [{ / B], select. Press [OK]. Noise Reduction menu will appear.
Information on disc editing

Guide to a title list

Title list allows you to check the titles recorded on the disc easily. You can choose a title to play from this list and easily edit the titles as you prefer. Press [TITLE].

Editing discs

You can edit discs for the following items. Be sure that once you edit titles, they will not remain as original. Deleting titles (Refer to page 52) Putting names on titles (Refer to page 53) Setting chapter marks (Refer to page 54) Clearing chapter marks (Refer to pages 54-55) Hiding chapters (Refer to page 56) Setting pictures for thumbnails (Refer to page 57) Dividing a title (DVD+RW/DVD-RW only) (Refer to page 58) When selecting Edit on Pop-up menu of the title list and edit the title, the title list is displayed after writing the edited contents onto the disc. Press [STOP C] to exit the title list.
NOV/21/06 11:00AM CH12 SP NOV/21/06 0:20:44 Play Edit Overwrite
NOV/24/06 10:05AM CH10 EP NOV/24/06 0:20:11
Edit Title Delete Edit Title Name Chapter Mark Current Chapter Index Picture Title Dividing
Editing discs (Setup menu)
Putting name on disc (Refer to page 59) Setting or releasing disc protect (Refer to pages 60-61) Erasing disc (Refer to page 62) Making edits compatible (Refer to page 62)
NOV/22/05 11:00AM CH12 EP 0:00:59
1.Titles recorded on the disc can be selected to edit by pressing [OK] with the cursor on the title. Using [K / L], select Edit. Press [OK]. 2.The arrow icon, which means the title list includes a next or a previous page. Press [K / L] by following direction of the icon. You can also use [{ / B] to go to the next/previous page. 3.The portion bar, which indicates the position of the disc. 4.The menus in here for editing as you prefer. The available menus depend on the disc type and the format type. An item which is not available is grayed. 5.The details of the title, which can be changed to the title name you will edit. 6.Time status bar of the title. Time status will be held even after exiting the edit mode, and you can resume playback from that point. 7.The selected title thumbnail from the title list. 8.Playback status of the current title.

The portion bar in the right side of the title list may not indicate the precise position in the disc. The portion bar may not indicate the position for the titles of which recording time is short. Once a disc is finalized, editing the disc or recording to the disc will not be available.

Deleting titles

You can delete titles which you do not need anymore. Be advised that the titles once deleted cannot be brought back to the disc. When the last title, which is recorded in the disc, in the title list is deleted, the disc space to record on will be increased. For DVD+R and DVD-R disc, the disc space to record on will not be changed.
Using [K / L], select Title Delete. Press [OK]. Confirmation window will appear.

Title Delete 1

Yes No
Press [TITLE]. Title list will appear. <DVD+RW/DVD-RW>
Using [K / L], select Yes. Press [OK]. After that, Are you sure? will appear, select Yes and then press [OK]. Title will be deleted. Data will be written onto the disc momentarily.
Using [K / L], select a desired title. Press [OK]. Pop-up window will appear.

Writing to Disc 90%

Deleted part of the titles in the portion bar changes in color.
Title list will appear. <DVD+RW/DVD-RW>
EMPTY TITLE 0:20:44 SP(2Hr)
Using [K / L], select Edit. Press [OK]. Edit menu will appear.

Edit 1

Title Delete Edit Title Name Chapter Mark Current Chapter Index Picture Title Dividing

<DVD+R/DVD-R>

Editing discs (contd)

Putting names on titles

You can put title names on the titles and change the names from this menu. The names you put on the titles will be displayed on a title list.
Using [K / L], select Yes. Press [OK]. The name you entered will be activated for the title.

Edit Title Name 6

Follow steps 1 to 3 on page 52 to display the Edit menu.

MY FAVORITE 0:00:59

After this operation is completed, press [RETURN] to exit. Data will be written onto the disc momentarily. This operation may take a while to be completed.
Using [K / L], select Edit Title Name. Press [OK]. A window for entering a title name will appear.

A B C a b c 3 @ ! ?

[ Guide to edit title name ]
[Step1]: Select a desired character set using [K/L], then press [OK].

ABC abc 123 @!?

[Step2]: Follow the list below, press the Number buttons repeatedly until the
desired letter appears. ABC <space> abc <space>

Select Press

Picture noise appears.

TV program reception does not fill the screen. TV program pictures are distorted.
TV channels cannot be changed. Playback picture is distorted. The playback picture or TV program from the equipment connected through the unit is distorted. Sound
If the playback picture output from a DVD player, VCR or tuner goes through the unit before reaching your TV, the copy-protection signal applied to some programs could affect picture quality. Disconnect the playback equipment in question and connect it directly to your TV. The disc is dirty or flawed. Re-connect all connections securely. Check if the connecting cord is damaged. Check the connections to the amplifier input. The input source setting on the amplifier is incorrect. The recorder is in pause mode or in Slow-motion Play mode. The recorder is in fast forward or fast reverse mode. If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack, check the Audio settings (pages 66-67). The disc is dirty or flawed. Batteries are weak. There are obstacles between the remote control and the unit. The remote control is far from the unit. There are no batteries in the remote control. Turn on the unit. The remote control is not pointed at the remote sensor on the unit.

There is no sound.

Sound is noisy. Remote control The remote control does not function.
If above remedies do not solve the problem, please call the Authorized Service Center for help. EN

Troubleshooting (contd)

Symptom Playback The disc does not play. Remedy No disc is inserted. A blank disc is inserted. The disc is upside down. Insert the disc with the labeled side facing up. The disc is not correctly inserted. The unit cannot play certain discs (such as a CD-ROM) (page 38). The region code on the DVD-Video does not match the unit (page 38). Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4). If the disc was recorded on another recorder, the unit cannot play the disc if it was not finalized. During the playback of two layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction. Resume play was activated (page 42). Press [STOP C] twice. You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first insert. The DVD-Video features an auto playback function. Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. Multilingual tracks are not recorded being played. The DVD-Video prohibits the changing of the language for the sound track. Try changing the language using the DVD-Videos menu. Multilingual subtitle are not recorded on the DVD-Video. The DVD-Video prohibits changing of the subtitles. Try changing the subtitle using the DVD-Videos menu. Multi-angles are not recorded on the DVD-Video being played. The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. The DVD-Video prohibits changing angles. Try changing the angle using the DVD-Video's menu. Set the TVs input to TV.

Finalize

To make DVD discs, which have been recorded on, possible to play in DVD players. With this unit, it is possible to finalize DVD-R/DVD+R/ DVD-RW discs.

Aspect ratio

The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high).

Sampling frequency

The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality as possible as it is.

MP3 (MPEG Audio Layer 3)

MP3 is a method of compressing files. You can copy MP3 files on CD-R/RW discs from the computer and play the files on this unit.
Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters. See also Title.
PBC (Playback Control) (Video CD only)
This function enables you to play back interactive software using a menu screen. See also Video CD.
(Secondary Audio Program) Sub-audio channel which is delivered separately from mainaudio channel. This audio channel is used as an alternate in bilingual broadcasting.

Component video output

Each signal of luminance (Y) and component (PB/CB, PR/CR) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i).
PCM (Pulse Code Modulation)
The most common system of encoding digital audio, found on CDs and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also Digital audio.

S-Video output

It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained. Playing discs

Digital audio

An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analog-todigital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also Sampling frequency and Analog audio.

Title (DVD only)

A collection of chapters on DVD disc. See also chapter.
Progressive Scan (525p/480p)
A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive Scan provides less flickering and higher image resolution than traditional (525i/480i) TV signals. Refer to page 68 for instructions on selective Progressive Scan mode.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.
ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquires, please contact us at:
FUNAI CORPORATION Customer Service
Tel :1-800-605-8453 http://www.funai-corp.com
19900 Van Ness Avenue, Torrance, CA 90501

Printed in China

1VMN21952 / E7A60UD