Index...65

Getting Started
S ee the Important Safety and Product Information guide in the product box for product warnings and other important information. Power key: slide to the left to turn on/off the unit; slide to the right to lock the screen Headphone/ audio out jack SD card slot Microphone Mini-USB connector External antenna connector Serial number (remove cradle to view serial number)

GPS antenna

Speaker
Warning: This product contains a lithium-ion battery. To prevent damage, remove the unit from the vehicle when exiting or store it out of direct sunlight. Before mounting the nvi, see the Important Safety and Product Information for information about laws pertaining to windshield mounting. nvi 705 Series Owners Manual

Step 1: Mount the nvi

1. Plug the vehicle power cable into the power connector on the right side of the cradle.
Cradle Vehicle power cable
5. Snap the cradle onto the suction cup arm. 6. Fit the bottom of your nvi into the cradle. 7. Tilt the nvi back until it snaps into place.
2. Remove the clear plastic from the suction cup. Clean and dry your windshield and the suction cup with a lint-free cloth. 3. Place the suction cup on the windshield. 4. Flip the lever back, toward the windshield.

Suction cup mount

8. Plug the other end of the vehicle power cable into a power outlet in your vehicle. 9. If you are using a traffic receiver in Europe, secure the antenna on the traffic receiver to the windshield using the suction cups. (The traffic receiver is included in some nvi packages.)

Microphone jack

Step 2: Configure the nvi

Step 4: Use the nvi

Your unit should turn on automatically if it is plugged in and your vehicle is running. To manually turn on your nvi, slide the Power key to the left. Follow the on-screen instructions.
1. Go outdoors to an open area, out of garages, and away from tall buildings. 2. Stop your vehicle, and turn on the nvi.
Step 3: Acquire Satellites
Acquiring satellite signals may take a few minutes. The bars indicate GPS satellite strength. When one bar is green, the nvi has acquired satellite signals. Now you can select a destination and navigate to it.
GPS satellite strength. Bluetooth technology status. Battery status. Current time. Touch to find a destination. Touch to view the map. Touch to make a call when
Touch to adjust the volume.
connected to a compatible mobile phone (not available on nvi 755).
Touch to use the tools such as media players, settings, and Help.

Finding Your Destination

The Where To? menu provides several different categories for you to use when searching for addresses, cities, and other locations. The detailed map loaded in your nvi contains millions of points of interest, such as restaurants, hotels, and auto services.

Note: Not all phones support all features of the nvi Phone menu.

In a Call

To end a call, touch > End Call. Touch > Call Options for the following options: Touch Tonesdisplays a keypad page so you can use automated systems, such as voice mail. Transfer Audio To Phonethis is helpful if you want to turn off the nvi but stay on the call, or if you need privacy. To switch back, touch Transfer Audio To Device. Mute Microphone.

Using Your Phone Book

Each time your mobile phone connects with the nvi, the phone book is automatically loaded into the nvi. It may take a few minutes for the phone book to be available.
1. Touch Phone > Phone Book. 2. Touch the phone book entry (contact) you want to call. 3. Touch Dial to call the contact.
nvi 705 Series Owners Manual21
1. Touch Phone > Points of Interest. 2. Search for the point of interest you want to call. 3. Touch Dial or.
Dialing a Point of Interest

Calling Home

Enter a phone number for your Home location, so you can quickly call home.
To enter your phone number: 1. Touch Phone > Call Home. 2. Touch Enter Phone Number to use the keypad page, or touch Select From Phonebook (only available if your phone supports phone book transfer). 3. Touch Done > Yes. The nvi dials your home phone number. To call home: 1. Touch Phone > Call Home. 2. The nvi dials your home phone number.

Dialing a Number

1. Touch Phone > Dial. 2. Enter the number, and touch Dial.
Viewing Your Call History
Each time your phone connects to the nvi, your call history is automatically transferred to the nvi. It may take a few minutes to transfer this data to the nvi.
1. Touch Phone > Call History. 2. Touch a category to view those calls. The calls are listed in chronological order, with the most recent calls at the top of the list. 3. Touch an entry, and touch Dial.
Placing Calls Using Voice Dial
You can place calls by speaking the contact name.

1. Touch Phone > Voice Dial. 2. Speak the contact name. NOTE: You may need to train your mobile phone to recognize your voice dial commands. Refer to the instructions for your phone.
nvi 705 Series Owners Manual23
Using Traffic Information
Your nvi can receive FM TMC (Traffic Message Channel) traffic or MSN Direct traffic content, depending upon the traffic receiver connected to your nvi. Your nvi displays both types of traffic content in the same manner.
Note: Garmin is not responsible for the accuracy of the traffic information.
The FM TMC subscription activates automatically after your Garmin GPS device acquires satellite signals while receiving traffic signals from the service provider. You can add other FM TMC subscriptions at any time. Check the Garmin Web site at www.garmin.com /fmtraffic for other available services.
Understanding MSN Direct Traffic
Understanding FM TMC Traffic
The MSN Direct receiver, which is integrated in the power cable, is included in the nvi 785 packages. MSN Direct receivers receive MSN Direct content, including traffic information. For information about activating MSN Direct service or using MSN Direct, refer to the nvi 785 Quick Start Manual and the MSN Direct Owners Manual Supplement at www.garmin.com.
The FM TMC traffic receiver, which is integrated in the power cable, is included in some nvi 755, 765, and 775 packages. FM TMC traffic receivers receive traffic information that is broadcast over the FM Radio Data System.
For information about traffic receivers and coverage areas, go to www.garmin.com/traffic.

Traffic in Your Area

Receiving Traffic Information
To receive traffic information, the following conditions must be met: The traffic receiver must be connected to the nvi. The traffic receiver and nvi must be connected to an external power source. The traffic receiver and nvi must be in data range of an FM station transmitting traffic information.
Note: Heated (metallized) windshields could degrade the performance of the traffic receiver.
When you are receiving traffic information, a traffic icon appears in the upper-left corner of the Map page. The traffic icon changes color to indicate the severity of traffic conditions on your route or the road you are currently travelling.

Severity Color Code

Color Green Yellow Red Description Low severity Medium severity High severity Meaning Traffic is flowing normally. Traffic is slightly congested. Traffic is heavily congested or stopped.
nvi 705 Series Owners Manual25

Traffic on Your Route

When calculating your route, the nvi examines the current traffic and automatically optimizes the route for the shortest time. If a severe traffic delay occurs on your route while you are navigating, the nvi automatically recalculates the route. You might still be routed through traffic if no better alternative routes exist. If a non-severe traffic delay occurs on your route, the traffic icon shows how much time the delay has added to your route. This time is already included in your estimated arrival time.

To manually avoid traffic on your route: 1. On the Map page, touch the traffic icon. 2. Touch Traffic On Route. 3. Touch the arrows to view other traffic delays on your route, if necessary. 4. Touch Avoid to avoid the traffic delay.

Viewing the Traffic Map

The traffic map shows color-coded traffic flow and delays on nearby roads.
1. On the Map page, touch the traffic icon. 2. Touch Show Traffic Map to view the traffic incidents on a map.
To return to the normal map from the traffic map, touch the traffic icon, and then touch Show Normal Map.
1. On the Map page, touch the traffic icon. 2. Touch Traffic Search to view a list of traffic delays. 3. Touch an item in the list to view the delay on a map and details about the delay. If there is more than one delay, touch the arrows to view the additional delays.

Viewing Traffic Delays

FM TMC Receiver LED Blink Codes
Your FM TMC traffic receiver may have LEDs that indicate system status.
Note: Not all traffic receivers have LEDs.

Advertisements

Power LED
In North America, if your nvi package includes an FM TMC traffic receiver, you will receive advertisements and coupons. Touch the advertisement on the screen to search for the nearest location related to that advertisement.
Caution: Do not attempt to write down the coupon codes while driving.

Status LED

The green power LED lights when connected to external power. The status LED indicates the signal reception: Yellow dot-dash flashes: determining your current location. Yellow solid: searching for signal. Red solid: momentary signal loss. Green solid: normal traffic data.
To stop receiving advertisements, turn off the traffic feature. See page 48.
nvi 705 Series Owners Manual27

Using Media Players

Using the Media Players

Using a Wireless Headset

To listen to high-quality audio, you can connect an Advanced Audio Distribution Profile (A2DP) Bluetooth headset. For more information about Bluetooth technology, see page 19. To pair and connect, your device and the nvi must be turned on and be within 10 meters of each other.
1. From the Menu page, touch Tools > Settings > Bluetooth. 2. Under Audio, touch Add (or Change). 3. Turn on your headset, and enable Find Me/Discoverable/Visible mode, if necessary.
4. Touch OK on the nvi. 5. Select your headset, and touch OK. 6. Enter the Bluetooth PIN/passkey for your headset, if necessary, and touch Done. 7. Touch OK.

Deleting Files

With the nvi connected to your computer, open the nvi or SD card drive/volume. Highlight the file that you want to delete, and press the Delete key on your computer keyboard.
Caution: If you are not sure about the purpose of a file, do not delete the file. Your nvi memory contains important system files that should not be deleted. Be especially cautious of files located in folders entitled Garmin.
nvi 705 Series Owners Manual33

Using the Tools

The Tools menu provides many features that are helpful when you are traveling across town or across the globe.

Settings

Touch Tools > Help to get information about using your nvi. Touch a category to view information about a topic. To search the topics for a keyword, touch Search.
For information about the settings, see pages 4450.

Media Player

Where Am I?
For information about the media player see pages 2831.
Touch Tools > Where Am I? to view information about your current location. This is a helpful feature if you need to tell emergency personnel your location. Touch a button on the right to view the nearest locations in that category. Touch Save Location to save your current location.

MSN Direct

With an optional MSN Direct Receiver, you can access MSN Direct content. For more information, go to www.garmin.com/traffic or http://garmin.msndirect.com. To purchase an accessory, go to http://buy.garmin.com. For information about activating MSN Direct service or using MSN Direct, refer to the MSN Direct Owners Manual Supplement at www.garmin.com.

ecoRoute

The ecoRoute feature calculates your vehicles fuel economy, carbon footprint, and the fuel price of navigating to a destination and offers tools for improving fuel efficiency. The data provided by the ecoRoute feature are estimates only; They are not actually read from your vehicle. To receive more accurate fuel reports for your specific vehicle and driving habits, calibrate the fuel economy. Touch Tools > ecoRoute. The first time you access the ecoRoute features you will be asked to enter fuel and mileage information about your vehicle.

nvi 705 Series Owners Manual39

Bilingual Tips

Touch Search to spell the word or the beginning of the word. Touch Legend to view information on abbreviations, labels, and pronunciation symbols for the selected language.
All Dictionary, Word and Phrase content is Oxford University Press. Voice files are Scansoft. Pocket Oxford Spanish Dictionary Oxford University Press 2005. Pocket Oxford Italian Dictionary Oxford University Press 2004. Oxford Portuguese Minidictionary Oxford University Press 2002. Multilingual Wordbank Oxford University Press 2001. Multilingual Phrasebank Oxford University Press 2001. Pocket Oxford-Hachette French Dictionary Oxford University Press and Hachette Livre 2005. Pocket Oxford-Duden German Dictionary Oxford University Press and Bibliographisches Institut & F.A. Brockhaus 2003.
1. Touch Tools > Calculator. 2. Enter the first number of your calculation. 3. Touch an operator (, x, -, or +). 4. Enter the second number of your calculation. 5. Touch =. 6. Touch C to perform a new calculation. 1. Touch Tools > Unit Converter. 2. Touch Conversion, select a unit to convert, and touch OK. 3. Touch a unit of measure that you want to change. 4. Select a unit of measure, and touch OK. Repeat if necessary. 5. Touch a blank rectangle. 6. Enter a value, and touch Done. The unit is converted. 7. Touch Clear to enter another value.

Calculator

Unit Converter
Updating Conversion Rates
The nvi allows you to update the currency conversion rates manually so that you are always using the most current rates.
1. Touch Tools > Unit Converter > Conversion > Currency > OK > Update. 2. Touch the rate you want to update. 3. Touch to erase the current rate. Enter a new rate, and touch Done. 4. Touch Save to finish.
In North America, if your nvi package includes an FM TMC traffic receiver, you will receive advertisements and coupons. The advertisements and coupons are stored so that you can access them when convenient.
1. Touch Tools > Advertisements. 2. Touch an advertisement and a location, if necessary. 3. Touch to view the coupon. Caution: Do not attempt to write down the coupon codes while driving.
Touch Restore to use the original rate.
nvi 705 Series Owners Manual41
Playing Audio Through Your Vehicle Speakers
Check local laws before using the FM transmitter in your area. Use of FM transmitters is currently illegal in certain European countries due to specific radio frequency restrictions. See page 59 for more information.
1. From the Menu page, touch Volume > Audio Output > FM Transmitter > OK > Auto Tune. 2. Tune your stereo to the selected channel.
Manually Tuning the FM Transmitter
If an FM transmitter is available on your nvi, you can listen to the nvi audio on an FM stereo.
Note: When using the FM transmitter function on the nvi, hands-free phone calls through the nvi might be overheard by adjacent vehicles through the FM stereo.

If you are not using an FM traffic receiver or you are using an MSN Direct receiver, select an FM channel for the FM transmitter.
1. From the Menu page, touch Volume > Audio Output > FM Transmitter > OK. 2. Tune your stereo to an FM channel that has a lot of static and has a low FM frequency number. 3. Touch the Current FM Frequency button. 4. Touch and to select the same frequency to which your stereo is tuned.
Auto Tuning the FM Transmitter
If you are using an FM traffic receiver, the nvi can select a channel for you.

Frequency Selection Tips

For best results, select a frequency below 90.1 FM. When searching for an appropriate FM frequency on your FM stereo, look for an unused frequency that has steady, consistent static. If you hear slight noises and sounds in the background of the static, select a different frequency. As you travel, you might need to change the frequency for the FM transmitter. A frequency not used by a radio station in your area might be used by a station elsewhere.
The distance between the vehicle power cable, the nvi, and the FM stereo antenna may also affect the noise level. Vehicles with antennas located far away, such as a rear-mounted antenna, may experience more interference from outside noise sources than vehicles with front-mounted antennas. As you drive, you may notice changes in the background static even though there is no FM station using that channel. You may notice this as you drive through intersections where certain kinds of traffic lights or other municipal electronic systems are operating. You might also notice this effect when the terrain changes, allowing distant stations to be received by your car stereo that were not received when you made your initial frequency selection. These and other sources of electrical interference may make it necessary to look for another frequency.
FM Transmitter Information
The FM transmitter is intended to transmit the audio from the nvi to your FM stereo. Do not adjust your FM settings while you are driving your vehicle.
nvi 705 Series Owners Manual43

Customizing the nvi

1. Touch Tools > Settings.
GPS Simulatorenable the simulator to turn off the GPS mode and simulate navigation. This also saves battery power. Usage Modespecify how you will be navigating to optimize routes: Automobile, Bicycle, or Pedestrian.
2. Touch the setting you want to change.
Unitschange units of measure to Kilometers or Miles. Keyboard Layoutselect QWERTY for a layout similar to a typewriter, or select ABCDE for an alphabetical layout.
3. Touch the button below the setting name to change it.
Changing the System Settings
Touch Tools > Settings > System.
Aboutdisplay the software version number, unit ID number, and audio version number for your nvi. You need this information when you update the system software or purchase additional maps. Restorerestore the original system settings.

Changing the Navigation Settings
Touch Tools > Settings > Navigation. Route Preferenceselect a preference for calculating your route: Faster Timeto calculate routes that are faster to drive but can be longer in distance. Shorter Distanceto calculate routes that are shorter in distance but can take more time to drive. Less Fuelto calculate routes that use less fuel than the other routes. Off Roadto calculate point-topoint routes (without roads). Avoidancesselect the road types you want to avoid or you would prefer to take on your routes. Restorerestore the original navigation settings.
Adjusting the Display Settings
Touch Tools > Settings > Display. Color Modeselect Daytime for a light background, Nighttime for a dark background, or Auto to automatically switch between the two. Screen Shotenable screen shot mode. Touch to take a screen shot. The picture bitmap file is saved in the Garmin\Screenshot folder on the nvi drive. Brightnessadjust the backlight brightness level. Reducing the backlight brightness increases your battery life. Restorerestore the original display settings.
nvi 705 Series Owners Manual45
Updating the Time Settings
Touch Tools > Settings > Time. Time Formatselect a 12-hour, 24hour, or UTC time format. Current Timeselect Automatic to update the time automatically. When Automatic is not selected, you can adjust the time in 15-minute increments. Restorerestore the original time settings.
Keyboardselect the keyboard for your language. You can also change the keyboard language mode from any keyboard by touching the Mode button. Restorerestore the original languages.
Changing the Map Settings
Touch Tools > Settings > Map. Map Detailadjust the amount of detail shown on the map. Showing more detail may cause the map to redraw slower. Map Viewselect a map perspective. Track Updisplay the map in two dimensions (2D) with your direction of travel at the top. North Updisplay the map in 2D with North at the top. 3Ddisplay the map in three dimensions (3D) in Track Up. Vehicletouch Change to change the icon used to display your position on

Setting the Languages

Touch Tools > Settings > Language. Voicechange the language for voice prompts. Text Languagechange all on-screen text to the selected language. Changing the text language does not change the language of user-entered data or map data, such as street names.
the map. Touch the icon you want to use, and then touch OK. Download additional vehicle icons at www.garmingarage.com. Trip Logshow or hide the log of your travels. To clear your trip log, touch Tools > My Data > Clear Trip Log. Map Infoview the maps loaded on your nvi and their version. Touch a map to enable (check mark) or disable (no check mark) that map. Restorerestore the original map settings.

nvi 705 Series Owners Manual49
1. Touch Tools > Settings. 2. Touch Restore. 3. Touch Yes.

Restoring All Settings

Clearing User Data
Caution: This deletes all userentered information. 1. Hold your finger on the lower-right corner of the nvi screen while turning on the nvi. 2. Keep your finger pressed until the message appears. 3. Touch Yes to clear all user data.
All original settings are restored. Any items that you have saved are erased.

Appendix

Ways to Charge Your nvi

Calibrating the Screen

If the touchscreen is not responding properly, calibrate the touchscreen.
1. Turn off the nvi. 2. Hold your finger on the middle of the screen. 3. Turn on the nvi, and immediately slide the power button to the right (lock). 4. Continue to hold your finger on the screen for about one minute until the calibration screen appears. 5. Follow the on-screen instructions. 6. Slide the power button to the middle to unlock the screen.
Use the vehicle power cable. Use the USB cable. Use an optional AC adapter cable.

Resetting the nvi

If the nvi stops functioning, turn off the nvi, and then turn on the nvi. If this does not help, slide the Power key to the left and hold it for 8 seconds. Turn on the nvi again. The nvi should operate normally.

Locking Your nvi

Garmin Lock is a theft-deterrent system that locks your nvi. Each time you turn on the nvi, enter the PIN or drive to the security location.
1. Touch Tools > Settings > Security. 2. Touch the button below Garmin Lock. 3. Enter a 4-digit PIN, and drive to a security location.

nMaps Guarantee

What is a Security Location?
Select a location you return to often, such as your home, for your security location. If the nvi has satellite signals and you are at the security location, you do not need to enter the PIN.
NOTE: If you forget your PIN and your security location, you must send your nvi to Garmin to get it unlocked. You must also send a valid product registration or proof of purchase.
To receive one free map update (if available), register your nvi at http://my.garmin.com within 60 days of acquiring satellites while driving with your nvi. You are not eligible for the free map update if you register by phone or wait longer than 60 days after the first time your nvi acquires satellites while driving with your nvi. For more information, go to www.garmin.com/numaps.

Additional Maps

You can purchase additional maps for your nvi. To see a list of maps that are compatible with your nvi, go to your nvi product page on the Garmin Web site (www.garmin.com), and click the Maps tab.

1. Go to www.garmin.com/products /webupdater, and download WebUpdater to your computer. 2. Connect the nvi to your computer using the mini-USB cable. 3. Run WebUpdater, and follow the onscreen instructions.

Updating the Software

Safety Cameras
After confirming that you want to perform an update, WebUpdater automatically downloads the update and installs it on your nvi.
Safety camera information is available in some locations. Check http://my.garmin.com for availability. For these locations, the nvi includes the locations of hundreds of safety cameras. Your nvi alerts you when you are approaching a safety camera and can warn you if you are driving too fast. The data is updated at least weekly, so you always have access to the most up-to-date information. You can purchase a new region or extend an existing subscription at any time. Each region that you purchase has its own expiration date.
Caution: Garmin is not responsible for the accuracy of, or the consequences of using, a custom POI or safety camera database.
Extras and Optional Accessories
For more information about optional accessories, go to http://buy.garmin.com, www.garmin.com/extras, or contact your Garmin dealer.
Custom Points of Interest
Use the POI Loader to load custom points of interest (POIs) onto your nvi. POI databases are available from various companies on the Internet. Some custom databases contain alert information for points, such as safety cameras and school zones. Go to www.garmin.com/extras, and click POI Loader to install the POI Loader onto your computer. For more information, refer to the POI Loader Help file. Press F1 to view the Help file. To view your Custom POIs, touch Where To? > Extras > Custom POIs. To change the proximity alert settings, touch Tools > Settings > Proximity Points > Proximity Alerts.
To delete the Custom POIs from your nvi, connect your nvi to your computer. Open the Garmin\poi folder in the nvi drive or the SD card drive. Delete the file entitled poi.gpi.

TourGuide

The TourGuide allows your nvi to play third-party, GPS-guided audio tours. These audio tours can take you on a route while playing interesting facts about historical sites along the way. For more information, go to www.garmin.com/extras, and click POI Loader. To view your TourGuide files, touch Where To? > Extras > Custom POIs. To change the TourGuide settings, touch Tools > Settings > Proximity Points > TourGuide.

Garmin Travel Guide

Much like a paper travel guide, the Garmin Travel Guide provides detailed information about places, such as restaurants and hotels. To purchase an accessory, go to http://buy.garmin.com, or contact your Garmin dealer. To use the Travel Guide, insert the SD card into your nvi. Touch Where To? > Extras. Touch the name of your Travel Guide to view it.

Charge your nuvi for at least 4 hours before using it on battery power. The battery icon in the corner of the Menu page indicates the status of the internal battery. To increase the accuracy of the battery gauge, fully discharge the battery and then fully charge it; do not unplug the nvi until it is totally charged. Contact your local waste disposal department for information on properly disposing of the unit.

Battery Information

Your nvi contains an internal, nonreplaceable, lithium-ion battery. Do not remove or attempt to remove the battery. Doing so could result in risk of battery fire or damage and injury.
Maximizing the Battery Life
Turn down the backlight (Tools > Settings > Display > Brightness). Do not leave your nvi in direct sunlight. Avoid prolonged exposure to excessive heat.

Changing the Fuse

Caution: When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper place.
About GPS Satellite Signals
If your unit will not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.
1. Unscrew the black, round end piece, and remove it. 2. Remove the fuse (glass and silver cylinder), and replace with a 3A fast blow fuse. End 3. Ensure that the silver piece tip is placed in the Silver tip black end piece. Fuse Screw on the black end piece.
Your nvi must acquire GPS (Global Positioning System) satellite signals to navigate. If you are indoors, near tall buildings or trees, or in a parking garage, your nvi cannot acquire satellites. Go outside to an area free from tall obstructions to use your nvi. When your nvi has acquired satellite signals, the signal strength bars on the Menu page are green. When it loses satellite signals, the bars turn red or clear. For more information about GPS, go to www.garmin.com/aboutGPS.
Mounting on Your Dashboard
Use the enclosed mounting disk to mount your unit to the dashboard and comply with certain state regulations.

Important Legal Notice Regarding Your FM Transmitter
Using Your nvi FM Transmitter in Europe
Go to www.garmin.com/fm-notice for more information.
Your nvi product contains an FM transmitter. Read the following notices.
Using Your nvi FM Transmitter in the United States
Use of FM transmitters is currently illegal in certain European countries due to specific radio frequency restrictions. You must check the local regulations in all European countries in which you intend to use the FM transmitter to ensure its legality. You accept full responsibility for complying with all such laws and regulations applicable in your particular country of operation. Garmin disclaims all responsibility for your failure to follow local laws and regulations. This FM transmitter should be limited to audio transmission for personal use only.
While use of FM transmitters is legal in the United States, the allowable output power for FM transmitters is lower in the United States than it is in those European countries that allow FM transmitters. The nvi models sold in Europe contain the higher powered European FM transmitter and cannot be legally used in the United States. You accept full responsibility for complying with all such laws and regulations applicable in your particular country of operation. You must disable the FM transmitter before using your European model nvi in the United States.
Declaration of Conformity
Hereby, Garmin declares that this nvi product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. To view the full Declaration of Conformity, see the Garmin Web site for your Garmin product: www.garmin.com.
Software remain in Garmin. You acknowledge that the Software is the property of Garmin and is protected under the United States of America copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse engineer, or reduce to human readable form the Software or any part thereof or create any derivative works based on the Software. You agree not to export or re-export the Software to any country in violation of the export control laws of the United States of America.
Software License Agreement
BY USING THE nvi, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY. Garmin grants you a limited license to use the software embedded in this device (the Software) in binary executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in and to the

currency, converting 41 current location, save 10 customizing the nvi 4450 custom POIs 54 custom routes; Seeroutes
background color 45 battery information 55 nvi 705 Series Owners Manual65
calculator 40 calling answering 21 hanging up 21 history 22 home 22 muting 21 this location 7 caring for your nvi 57 charging your nvi 51, 62 clock for the world 38 computer connection 32 contacting Garmin i converting currency 41 units 40 coordinates 15 cradle 2
dashboard disk 57 data on map, change 16 deceleration score 36 Declaration of Conformity 60 deleting all user data 50 character 9 custom POIs 54 Favorites 11, 14 files 33 recent finds list 10 route 14 detail maps 47 detour 6 diacritical characters 9 digital elevation map 15 display settings 45 downloading locations 12 photos 12 Driving Challenge 36 driving directions 17
ecoRoute 35 calibrate fuel economy 35 Driving Challenge 36 fuel price 36 fuel report 35 mileage report 37 tips 37 vehicle profile 35 emergency assistance 34 Extras 53, 55
saved places (Favorites) 10 using photos 1213 your car in a parking lot 11 FM transmitter 4243 legal information 59 setup 42 free map update 52 fuel price, adjusting 36 fuel report 35 fuse, changing 56

incoming call 21

keyboard 9 language mode 9, 46 layout 44 kilometers 44
Favorites 10 downloading 12 editing 11 photos 12 files 3233 deleting 33 managing 3233 supported types 32 transferring 3233 finding places 4 address 8 by name 8 by postal code 8 Go! page options 7 item on the map 14 near another location 7 recent selections 10 66
Garmin Lock 47, 52 geocaching 15 globe view 15 Go! page options 7 Go Home 9 GPS about GPS 56 off/on 44
Lane Assist 18 language guide 39 Last Position 11, 64 legal notice, FM transmitter 59 lithium-ion battery 55, 61 loading files on the nvi 32 locking the nvi 52
hands-free phone features headphone jack 61 headset 28 Help 34 Home location 9 phone number 22
M3U playlist format 30 map additional 52 browse 14 change data displayed 16 customize 46 detail level 46 enable detail maps 47 Map Info button 47 moving 14 nvi 705 Series Owners Manual
Index update 52 version 47 view 46 zoom 14 map contours 15 MapSource 52 map update 52 max speed, reset 17 measurements, converting 40 media player 2831 menu page 3 microphone 1 mileage report 37 miles 44 mounting on dashboard 57 removing from mount 57 MP3 music files loading 32 playing 28 music 28 muting audio 6 phone call 21 My Data 38 myGarmin i settings 45 Next Turn page 18 nMaps Guarantee 52