Warnings and Precautions CAUTION: Use Garmin Que at your own risk. To reduce the risk of unsafe operation, carefully review and understand all aspects of this Application Guideand thoroughly practice operation using the simulator mode prior to actual use. When in actual use, carefully compare indications from Garmin Que to all available navigation sources, including the information from other NAVAIDs, visual sightings, charts, etc. For safety, always resolve any discrepancies before continuing navigation. CAUTION: It is the users responsibility to use this product prudently. This product is intended to be used only as a navigational aid and must not be used for any purpose requiring precise measurement of direction, distance, location or topography. This product should not be used as an aid to determine ground proximity for aircraft navigation. CAUTION: The electronic chart is an aid to navigation and is designed to facilitate the use of authorized government charts, not replace them. Only official government charts and notices to mariners contain all information needed for safe navigation and, as always, the user is responsible for their prudent use. MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we identify as required in product literature and copyright messages displayed to the consumer. Virtually all data sources contain inaccurate or incomplete data to some degree. This is particularly true outside the United States, where complete and accurate digital data is either not available or prohibitively expensive. WARNING: The Global Positioning System (GPS) is operated by the United States government, which is solely responsible for its accuracy and maintenance. The system is subject to changes which could affect the accuracy and performance of all GPS equipment. Although Garmin Que is a precision electronic NAVigation AID (NAVAID), any NAVAID can be misused or misinterpreted and, therefore, become unsafe. WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer, birth defects, or reproductive harm. This Notice is being provided in accordance with Californias Proposition 65. If you have any questions or would like additional information, please refer to our web site at http://www.garmin.com/prop65.
Important! Because Garmin Que can be used with a PDA for vehicular navigation, important safety considerations must be observed. Please read and observe the instructions on this page. WARNING: For use in vehicles, it is the sole responsibility of the owner/operator of a vehicle equipped with a PDA with Garmin Que installed, to place and secure the device so that it will not interfere with the vehicle operating controls and safety devices, obstruct the drivers view of driving conditions, or cause damage or personal injury in the event of an accident. Do not mount the PDA over airbag panels or in the field of airbag deployment. Airbags expand with a rapid force that can propel objects in their path towards the vehicle driver or passengers causing possible injury. Refer to airbag safety precautions contained in the vehicle owners manual. Do not mount the PDA in a place where the driver or passengers are likely to impact it in a collision. The mounting hardware provided by Garmin is not warranted against collision damage or the consequences thereof. WARNING: When used in vehicles, it is the sole responsibility of the driver of the vehicle to operate the vehicle in a safe manner, maintain full surveillance of all driving conditions at all times, and not become distracted by the PDA to the exclusion of safe driving practices. It is unsafe to operate the controls of the PDA while you are driving. Failure by the driver of a vehicle equipped with a PDA with Garmin Que installed to pay full attention to operation of the vehicle and road conditions while the vehicle is in motion could result in an accident with property damage and personal injury.

Do Not Mount Where Drivers Field of Vision is Blocked
Do Not Place Unsecured on the Vehicle Dash
Do Not Mount in Front of Airbag Panels
Do Not Mount in Front of an Airbag Field of Deployment
Table of Contents Introduction... I

About the Manuals.. I

About Garmin Que Setup.. I Warnings and Precautions.. II
Setup Guide.. I Quick Start Guide... I Application Guide.. I

Overview... 1

Connecting to the GPS Receiver.. 1 Customizing the Que Units Settings. 2 Using the Hard Buttons to access Garmin Que applications... 3 Using the Arrow Button to access Garmin Que features... 3 Using the QueMap Application Selector Icons5 Using the QueMap Que Menu. 5 Using Preferences for QueMap.. 6 Location Formats and Map Datums. 6 Marking your current location as a waypoint 7 Using QueFind.. 8

QueRoutes.. 14

Finding a City... 9 Finding an Address.. 9 Finding an Intersection.. 10 Finding Points of Interest.. 11 Using Waypoints.. 11 Creating Routes... 14 Using QueMap to Select a Destination.. 15 Using a Detour.. 15 Stopping and Resuming Route Navigation. 15 Customizing a Route.. 16 Saving a Route.. 16 Route and Guidance Preferences.. 17 Using Routing Voice Prompts. 17 Using QueTurns... 18

PDA Low-Power Mode.. 18

Map Data Installation.. 19 Additional Information.. 20 MapSource Cartography. 22 What is WAAS?.. 22 Software License Agreement. 22
Using Map Install to Download Map Data. 19 Using MapSource to Download Map Data. 19 Specifications.. 20 Troubleshooting Guide.. 21

OVERVIEW >

OVERVIEW
You may customize Garmin Que to fit your needs, such as selecting the units of measure, map orientation, map detail, routing preferences and others. For now, the Que default settings should be adequate for learning how to use the applications with the exception of the units preferences explained in this section. Information on customizing each of the various Que applications is explained in the sections describing each Que application.

location on the map. If that location is supported by detailed mapping data, a description briefly displays. Any point on the map can be saved as a waypoint by tapping the Waypoint marker flag in the map toolbar. The map color can automatically compensate for the difference in day and night lighting conditions. See Using Preferences for QueMap. The map scale can be changed to show more map area with less detail or more map detail with less area (zoom out and zoom in). Press the Up and Down keys on the front of the unit to increase and decrease the scale in single increments. To select a specific scale, use the Map Scale Selector shown at the top of this page.
Map Orientation (North Up) Current location icon
There are three methods to open the QueMap Application. Press the Hard key you have assigned to the Que applications. Use the Left or Right Arrow keys to cycle through the Que applications until you reach QueMap. Use the Applications Launcher and tap the QueMap icon.
To Display the QueMap Application:
The Map Page is the primary screen of the QueMap application. From this page you can observe a triangular arrow that indicates your current location and direction of travel. As you move, the arrow moves with you, turning when you turn and stopping when you stop. When zoomed in the accuracy of your location is indicated by an Accuracy Circle. The smaller the circle the more accurate your location. The Map also displays detailed geographic information such as highways and roads, lakes and rivers, cities, waypoints and residential streets, depending on the detail of map data being used. Detailed maps can be loaded from map data Disks using the Map Install feature as explained in the Downloading Map Data section of this guide. There are two map orientation options: North Up and Track Up. North Up orients the map like a paper map, while Track Up orients the map in the direction of travel and can be set to display only below a desired map scale. As you travel to the edge of the display, the map moves (redraws) to constantly show your current location. When using Track Up, the North arrow indicates the map orientation. When the Pan Map with Stylus mode is selected, drag the stylus across the screen to pan the map with the movement of the stylus. Tap the stylus on the map to place a map pointer on any selected

Viewing the Map Page

Map Scale Waypoint Flag (Zoom (Mark Location Scale) icon) View Area Display Information Pan Map Selector Format icon with Stylus icon Position Arrow icon

The Map Page

Accuracy Circle New Waypoint Page Position Arrow on Map

Map Point Information

Using the QueMap Application Selector Icons
With QueMap displayed, tap the desired selector to activate the feature as described below: Tap the Display Format icon on the map toolbar toggle between the three options of displaying and hiding the navigation data fields. Tap the Waypoint Flag on the map toolbar to display the Mark Waypoint entry window for your current location (Position Arrow) or a New Waypoint entry window for the Map Pointer. The window displays with a name describing the location if identified as an item in the map data or as Waypoint 1, 2, 3, etc. Tap the Information icon to display information about a location identified by the Map Pointer on the Map Page. When tapped, an information window displays describing the location if identified as an item in the map data or position coordinates (i.e. lat/lon). Tap the Position Arrow icon (vehicle pointer) to center the map on your current location when in North Up mode. When in Track Up mode, the map is centered horizontally on your location. Tap the Pan Map icon to allow the stylus to drag the map and to mark map items with the map pointer (Panning Arrow). Place the stylus anywhere on the map and then move the stylus. The map moves with the stylus and exposes the part of the map previously out of view. Lift the stylus to stop panning. To recenter your location on the map, tap the Position Arrow icon. Tap the View Area icon to allow you to define an area on the map with the stylus that will be enlarged when you lift the stylus from the screen. Select a point adjacent to the area you want to enlarge and then drag the stylus to create a box around the area. Lift the stylus to complete, allowing the map to redraw. When the View Area Selector is active the Pan Map feature is not usable. Tap the Map Scale icon to display the list of map scales. Drag the arrow to scroll through the entire list of scales. Tap the scale you want and the map will display at that scale.
Map with Data Fields showing only

QueMap Menu

Most Map Preferences offer a Text Size option selector and a Maximum Zoom Selector option.

Location Preferences

Map Datums
Marking your current location as a waypoint To mark your current location as a waypoint:
1. Use the stylus to tap the Waypoints icon (ag) at the base of the map. Be certain the pointer arrow is not displayed or the location on the map marked by the arrow is saved as the waypoint. 2. The Mark Waypoint window is displayed with the waypoint automatically named as Waypoint. (Each subsequently marked waypoint will be named Waypoint 1, 2, 3, etc.) 3. Rename the waypoint to one more descriptive of your location as explained at the bottom of this page. 4. To save the waypoint to the Waypoint List, tap OK.
3. Observe that the New Waypoint window has named the location as an address, intersection, or named map item if supported by data in the map database. If not supported, it names the location as Waypoint 1, 2, 3, etc. 4. Rename the waypoint. 5. If the point on the map is an address, checking the Include Address Data option copies the address information to the new waypoint. 6. To relocate the waypoint on the map, tap Edit. 7. To save the waypoint to the Waypoints List, tap OK. To rename the waypoint and view details about it: 1. From the New Waypoint window, tap the Edit button to display the Waypoint Map page which shows the waypoint on the map. 2. Tap the second icon at the bottom of the page to display the Details page. Enter a new name for the waypoint, add a phone number, etc. 3. Tap the third icon to display the Location page. Here you can change its map symbol, move its location and enter an altitude value if known.
Mark Waypoint Dialog Used for saving a location as a waypoint
Waypoint Marked on the Map Page

New Waypoint Window

To save a point on the map as a waypoint: 1. With the Map displayed, use the stylus to tap a desired location on the map which causes the map pointer to display. If the point on the map where you tapped has descriptive information in the map database, it displays for six seconds. 2. Once the map pointer is at the desired location, tap the Waypoint Flag at the bottom of the map to display the New Waypoint window.

Waypoint Map Page

Waypoint Details Page

Waypoint Location Page

Using QueFind
The QueFind Application displays lists of geographic points in the map database and downloaded detailed maps. Use the QueFind application to achieve one of the tasks listed below: Use existing lists of map data items such as Waypoints, Cities, and Points of Interest to nd desired destinations and navigate to them using the QueRoutes application. Find items contained in the map data and in the Address Book. View details about items, such as addresses and telephone numbers. Find an item to use as a destination for a route. To open the QueFind Application: There are three methods to open the QueFind Application. Press the Hard key you have assigned to the Que applications. Use the Left or Right Arrow keys to cycle through the Que applications until you reach QueFind. Use the Applications Launcher and tap the QueFind icon. Once the QueFind application is displayed, tap the icon of the category in which you want to find items. To select and view an item from a QueFind Category: 1. Once you have selected a category from the display of Find icons, the Find Items List is displayed. 2. You may choose a search method for an item. If the map pointer is present on the map page, Near Map Pointer is available to allow you to search for items near the map pointer. If on an active route, Near Route Destination and Near Current Route are available. 3. You can shorten your search list by entering the name of the item at the top of the page in the Name or Containing eld. 4. When the list is displayed, highlight a single item.

5. Then tap Details to display an information page that provides a map showing the item location, the distance from your current location, the item name along with item type, address and phone number (if available). Tap Done to return to the list or the Save Waypoint button to save it on the Waypoints list.
Palm OS Find is a Palm OS application for nding items within the Palm OS (Operating System). Tap this to nd an Address Book item, etc.
Search Methods when navigating a route
Enter a distance range to search around the current route
6. Tap Route To to generate a route to this item. 7. Tap Done to return to the previous QueFind page.
Finding a City To select a city from the Cities List: 1. Tap the QueFind icon then tap Cities to view the Cities List. 2. Choose a search method by selecting from Near Current Location, By Name, or Near Other options. If the map pointer is present on the map page, Near Map Pointer is available to allow you to search for cities near the map pointer. The Near Other option allows you to designate a map item and then search for cities near that item. Tap the Menu button to display the drop down options list where can use either the Que basemap or downloaded detailed maps to nd a city. Tapping Find Near Selected Item displays only cites near a map item of your choice. 3. Shorten your search list by entering the name of the city at the top of the page in the Name or Containing eld. 4. When the list is displayed, highlight a single city. 5. Tap the Details button to display an information page that provides a map showing the city location on the map, the distance from your current location, and city name along with state and country information. The title of the page identies the size category of the city (if that information is available). Tap the Done button to return to the list or the Save Waypoint button to save it as a waypoint on the Waypoints list. 6. With the city highlighted on the list, tap Route To to generate a route to it. 7. Tap Done to return to the previous QueFind page.
City Details Cities List with search methods Map Page menu
Finding an Address To nd an address: 1. From the QueFind application, tap the Addresses icon to display the Addresses page. 2. If you know the QueFind Address Entry Fields region (state, province), city, or postal code of the address, enter them now to limit the search results and the choice of street and city names. To enter the regions, city or postal code, tap the selector trigger, then tap an item in the list. If you select a city, the region eld is hidden; to show the region eld again, tap the city name and tap the Use All button at the bottom of the Select City Name dialog box. To again search all regions or postal codes, tap on the region or postal code selector trigger and then tap the Use All button at the bottom of the dialog box. 3. Enter the desired street number in the Number eld. 4. Tap the street eld to display the Select Street Name dialog box. Begin entry of the street name. When the desired name of the street is displayed, tap it to place it on the page. Street names are entered and selected using only the body of the street name, For example, if the street portion of the address you are nding is E. Main St, enter only Main and select Main from the list. Likewise if the street portion of the address City Details is N 13th Ave enter only 13th and select 13th Info Page from the list. Tap the Prex/Sufx button to display options for the street prex and sufx. If there is no prex or sufx to be added, select None. After you have made your selections, tap OK to return to the QueFind Addresses page. 5. Tap the Search button to display the list of matches.

Waypoint Information Page
Location Information Page

Waypoint Symbol List

Edit Location Options
Moving a waypoint on the Map
To select a waypoint as a Route Destination using QueFind: 1. Tap the QueFind icon. 2. Tap the Waypoint icon to view the Waypoints list. 3. Highlight the desired waypoint and tap Route To. 4. Observe the route on the Map Page.
Dial Phone Number query Phone is Off message To delete a waypoint: 1. From the Waypoints List page, highlight the waypoint you want to delete. 2. Tap the Menu button to display the drop-down Waypoints List Options Menu. 3. Tap the Delete Waypoint option. Tap Yes when the delete prompt appears. The waypoint is removed from the Waypoints List.
QueFind Waypoints List with highlighted waypoint
Detail page for a Point of Interest
To dial the Phone Number of a Point of Interest or Waypoint: 1. Tap the QueFind icon. 2. Tap the Point of Interest category icon or the Waypoint icon to view the list of items. 3. Highlight the desired item and tap Details. 4. If there is a phone number in the Phone eld of the Details page and your PDA includes an integrated phone, press the phone Dial button. 5. You are then prompted to conrm that you do want to dial the number. 6. Select Yes to dial and if the phone is turned off, select Yes when the Phone is off message appears. 7. You can also dial the number using the stylus and the Dial option from the Detail page drop-down menu.
(Requires a PDA with integrated phone)
Waypoint List Options Menu

Dial Phone Number option

Using QueRoutes QueRoutes is an application that provides you with a graphic route line, plus graphic and voice turn-by-turn directions to a chosen destination. You can select a destination from any of the QueFind application categories and the QueMap application. QueRoutes functions primarily as a route management tool once you have selected a destination.
Use the QueRoutes application to: Recalculate the route to your current destination. Add stops or new waypoints (vias) to customize your route. Save specic routes for use at a later date. Set the preferences for routing. Stop and resume navigation of an active route.

3. The QueMap application is displayed and a Calculating Route animated graphic is displayed in the bottom left-hand corner of the map. When the map displays the route in magenta, the route is active. 4. Follow the voice prompts and turn preview pages to navigate to your destination.
There are three methods to access QueRoutes.
To access the QueRoutes Application: Press the hard key you assigned to the Que Application to access the QueRoute Applications. Press the assigned hard key repeatedly to cycle through the Que Applications until the QueRoutes application displays. Use the Applications launcher to access the Que Apps page and then select QueRoutes.
Creating a Route to a QueFind item

Calculating Route

QueRoutes with Active Route Active Route shown on the Map

Creating Routes

To begin a route all you really need is a destination. A route can be activated from QueFind or QueMap.
To use QueFind to select a destination: 1. Select an item from any of the QueFind application search categories. Refer to the QueFind section of this manual for detailed instructions on searching for items. 2. Tap the Route To button at the bottom of the page.
Using QueMap to Select a Destination
You can create a route to any place on the map by using the stylus to place the map pointer on a location that you want to use as a destination.
Stopping and Resuming Route Navigation
You can stop navigating a route at any time.
To select a destination: 1. Tap the QueMap icon to display the Map. 2. With the stylus, tap the location on the map that you want to use as a destination. 3. Tap the MENU icon to display the QueMap options menu. 4. Tap the Route To. option. 5. A Calculating Route animated graphic is displayed in the bottom left-hand corner of the map. When the map displays the route in magenta, the route is active. 6. Follow the on-screen directions, voice prompts and turn preview pages to navigate to your destination.
To Stop or Resume route navigation: 1. Tap the QueRoute icon to display the QueRoutes dialog box. 2. Tap the Stop Navigation icon to remove the route overlay from the Map page. This also stops voice prompts and turn preview pages. 3. Start navigating again by tapping the Resume Navigation icon from the QueRoutes dialog box.

Via Points List and Options Menu
Saving a Route Once you have created a route to a destination, while it is still active, you can save it to the Saved Routes list for re-use at a later date.
Saved Route Details Dialog When you select a Saved Route to navigate, the route is recalculated beginning from your current location.

Saved Routes List

Route and Guidance Preferences You can control the way routes are calculated and how the route guidance prompts are given. When you set preferences for an individual route, all other routes reflect those preferences. To set routing preferences: 1. Tap the QueRoute icon to display the QueRoutes dialog box. 2. Tap the Route Preferences icon to display Route Preferences. 3. Tap the icon beneath the option to display and select from three options. The Off Road option generates a straight line to your destination, not following roads. 4. Tap the icon beneath the Calculate Routes For option to display and select from a list of transportation options. 5. Tap the box next to the Avoid options to toggle a check mark and activate that option.
3. Tap the icon beneath the Off-Route Recalculation option to display and select from four options for recalculation notication. Tap Help for denitions. 4. Tap the icon beneath the Turn Preview option to display and select from a list of methods for turn notication. Tap Help for denitions. 5. Tap the icon beneath Voice Prompt to select voice guidance. Tap Help for denitions. 6. Toggle the Attention Tone box for audible notication of route changes. Tap Help for denitions.
Guidance Preferences Using Routing Voice Prompts Once you have created a route to a destination you can begin navigation. In addition to a graphic in the QueMap application and pop-up turn displays you will be given voice prompts prior to turns and points on your route. While navigating a route, you may need to adjust the volume to compensate for road noise, etc. To adjust voice prompt volume: 1. Select the Volume menu item from any Que application. 2. Adjust the Guidance volume slider to a level appropriate for overcoming environmental noise. 3. Tap Done when completed. To listen to a turn voice prompt or GPS status message at any time, hold the left or right Arrow key on the PDA when on the main page of any Que application. Volume Adjustment Page

Routing Preferences

To set guidance preferences: 1. Tap the QueRoute icon to display the QueRoutes dialog box. 2. Tap the Route Preferences icon. Tap the icon preceding Routing to display the list of other options. Select Guidance.
Using Que Turns QueTurns is an application that can show you a list of turn-byturn directions to a destination. The application is active only when a route is active. Use QueTurns to: View the turns you will take while navigating the route. View the Turn Preview for an individual turn. To open the QueTurns Application: There are three methods for accessing QueTurns.

Unlock Code Dialog Install Maps on Device Sendiing Maps Using MapSource to Download Map Data If you own or intend to purchase additional Garmin MapSource products (other than those provided with your Palm OS handheld), you may need an unlock code to install some of these additional MapSource products. Follow unlock instructions provided in the Garmin Que for Palm OS Setup Guide. The MapSource operating software (version 5.4 and above) can be used to download maps to the PDA internal storage or a Secure Digital Card. When using the Save To Device feature on MapSource download maps, select the Que option to display the Save To Que dialog window. In the Que Settings portion of this window, select a Location of either Internal Storage or Secure Digital (SD) Card and then click Send. Note: The next time you perform a HotSync operation the map data from either type of download is transferred to the Palm OS handheld. When downloading maps, be certain to check the amount of free space available on the card to be certain there is sufficient space for the new maps. Open the Card Info application to view the available space information.
MapSource map selection window Save from and to Device buttons Send to Que dialog box
ADDITIONAL INFORMATION >

ADDITIONAL INFORMATION

Specications Internal System
Operating System: Palm OS v 5

Application Software

Garmin Que: GPS Info, Electronic Mapping, Automatic Route Generation, and Turn-By-Turn Voice Guidance

Moving Map Features

Basemap: Routable basemap contains state and country boundaries, lakes, rivers, streams, airports, cities, towns, coastlines, state and interstate highways, local thoroughfares and secondary roads within metro areas Accepts downloadable map detail from Garmin PC-based MapSource City Selectand City Navigator Data Disks which provide street-level detail, addresses, listings of nearest restaurant, hotels, ATMs and more. Accepts most other MapSource map data as well as U.S. Topos and Marine charts

Map Data Disks:

Navigation features

Routes: Automatically calculated with turn-by-turn instructions; using built-in basemap, routes include interstates, highways and major thoroughfares; with detailed data from Map Data Disks, routes include residential street-level detail
Specications are subject to change without notice.

Troubleshooting Guide

Symptom
GPS Signal Related Problems No GPS Connected message.

Probable Cause

Connection to GPS receiver or PDA not active.

Remedy

Use Que Prefs or the Que menu to connect to the GPS receiver. Turn On receiver. Connect power source or charge battery. Relocate closer to the PDA. Wait for data to be collected. Move to location with less interference Relocate antenna for best reception. Most vehicles with this type windshield block satellite signals as well. GPS receivers will not operate inside the vehicle.
Connecting to GPS message stays on.
GPS receiver is not turned on. GPS receiver is not powered. GPS receiver (if wireless) is out of range. GPS receiver is collecting satellite data. GPS receiver cannot maintain a constant signal Antenna is incorrectly positioned.
Acquiring Satellites message stays on. Lost Satellite Reception message appears repeatedly.
Cannot achieve reliable satellite signals when Some auto windshields are tinted using a thin the GPS receiver is mounted on my auto dash. metallic coating to reect ultraviolet sun rays.
With the receiver on my auto dash, the satellite Car radios and Disk players can generate electrical Relocate the GPS receiver away from the signal reception is weak. elds that can interfere with satellite signals. radio or turn off the radio when using the Garmin Que to navigate. Map Messages at Startup or Card Insertion Cant Unlock Maps Detailed Maps Dont Support Routing Too Many Maps on Data Card You must enter the unlock code during MapSource Follow installation instructions on the setup installation. disk. These maps are not the type used for auto-routing. Select maps designed for auto-routing. The map sets you are trying to load are too Check the space available in the chosen large for the space available in the storage location. location and choose another location with enough space or reduce the map set size.
Map Data Related Problems No Find Feature items listed for By Name options. Que. Maps that support that option are not installed from MapSource. Open MapSource and select maps from City Select version 6.5, save to Garmin
None Found message when accessing the These options only display data from topographic Load maps of this type using MapSource Man made Places, Water Features, and Land maps and marine charts. topographic and marine chart map data. Features Find Options. Find Feature Search Messages Select Street Before Searching Select Two Streets Before Searching None Found You have tapped the Search button before entering the name of the street for an address. Enter a street name before beginning your search for an address.

Software License Agreement THIS SOFTWARE IS OWNED BY GARMIN CORPORATION (GARMIN) AND IS PROTECTED UNDER COPYRIGHT LAWS AND INTERNATIONAL COPYRIGHT TREATIES. THIS SOFTWARE IS LICENSED, NOT SOLD. THIS SOFTWARE IS PROVIDED UNDER THE FOLLOWING LICENSE WHICH DEFINES WHAT YOU MAY DO WITH THE PRODUCT AND CONTAINS LIMITATIONS ON WARRANTIES AND/OR REMEDIES. IMPORTANT: CAREFULLY READ THIS LICENSE BEFORE USING THIS PRODUCT. INSTALLING, COPYING, OR OTHERWISE USING THIS PRODUCT INDICATES YOUR ACKNOWLEDGMENT THAT YOU HAVE READ THIS LICENSE AND AGREE TO ITS TERMS. IF YOU DO NOT AGREE, RETURN THE COMPLETE PRODUCT TO GARMIN INTERNATIONAL. INC. CUSTOMER SERVICE, 1200 EAST 151st STREET, OLATHE, KS 66062 WITHIN 10 DAYS OF THE DATE YOU ACQUIRED IT FOR A FULL REFUND. 1. LICENSE: GARMIN (we or us) provides you with storage media containing computer software (the Program) which may also include digital cartographic data and online or electronic documentation, and printed materials (together called the Product) and grants you a limited non-exclusive license to use the Product in accordance with the terms of this License Agreement. The copyright and all other rights to the Product shall remain with us. You must reproduce any copyright or other notice marked on the Product on all copies you make. 2. YOU MAY: a) install and use one copy of the Product on a single computer or network. This copy is to be used by only a single user at a time. If you wish to use the Product for more users, you will need an additional license for each user. b) make one copy of the Product for archive or backup purposes. c) use a copy of the Product on a home or portable computer if that copy is never loaded at the same time it is loaded on your primary computer. d) transfer the Product to someone else only if you assign all of your rights under this License, cease all use of the Product, erase or destroy any copy (including the hard disk copy) made in support of your use of the Product, and ensure that the other person agrees to the terms of this License.
3. YOU MUST NOT: a) make copies of the Product except as expressly permitted in Section 2 of this License. b) translate, reverse engineer, decompile, or disassemble the Product except to the extent the foregoing restriction is expressly prohibited by applicable law. c) rent, lease, loan, sub-license, distribute, assign, or transfer the Product except as set out in Section 2 (d) above. d) modify the Product or merge all or any part of the Product with another program. 4. TERM: This License shall continue for as long as you use the Product. However, this License will terminate automatically without notice from GARMIN if you fail to comply with any of its terms or conditions. You must agree, upon termination, to destroy all copies of the Product. The Limitations of Warranties and Liability set out below shall continue in force even after any termination. 4. TERM: This License shall continue for as long as you use the Product. However, this License will terminate automatically without notice from GARMIN if you fail to comply with any of its terms or conditions. You must agree, upon termination, to destroy all copies of the Product. The Limitations of Warranties and Liability set out below shall continue in force even after any termination. 5. LIMITATION OF WARRANTIES AND LIABILITY: THE PRODUCT IS PROVIDED ON AN AS IS BASIS, WITHOUT ANY WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABLE QUALITY, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR THOSE ARISING BY LAW, STATUTE, USAGE OF TRADE, OR COURSE OF DEALING. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE PRODUCT IS ASSUMED BY YOU. NEITHER WE NOR OUR DEALERS OR SUPPLIERS SHALL HAVE ANY LIABILITY TO YOU OR ANY OTHER PERSON OR ENTITY FOR ANY INDIRECT, INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER, INCLUDING, BUT NOT LIMITED TO, LOSS OF REVENUE OR PROFIT, LOST OR DAMAGED DATA OR OTHER COMMERCIAL OR ECONOMIC LOSS, EVEN IF WE HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR THEY ARE FORESEEABLE. WE ARE ALSO NOT RESPONSIBLE FOR CLAIMS BY A THIRD