20062007 Garmin Ltd. or its subsidiaries Garmin is a trademark of Garmin Ltd. or its subsidiaries, registered in the USA and other countries. zmo is a trademark of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of Garmin.

Quick Reference Guide

zumo 500/550
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such name by Garmin is under license. For the latest free software updates (excluding map data) throughout the life of your Garmin products, visit the Garmin Web site at www.garmin.com. Part Number 190-00697-01 Rev. C March 2007 Printed in Taiwan
the personal motorcycle navigator

Important Information

WARNING: This product contains a lithium-ion battery. See the Important Safety and Product Information guide in the product box for important battery safety information. WARNING: When your zmo is not in the motorcycle mount, use the weather cap to prevent damage to the connector. CAUTION: To prevent damage to the touch screen, do not place sharp objects in the carrying case pocket. TIP: Fold and keep this guide in your carrying case pocket.

Specifications

Water resistance: IPX7 waterproof (submersible in 1 meter of water for up to 30 minutes) Power: Vehicle power cable, AC cable Battery: Rechargeable, replaceable lithiumion battery. Battery life: Fully charged, up to 4 hours For more information, see the owners manual on disk. See the Important Safety and Product Information guide in the product box for product warnings and important information.

Looking at Your zmo

A Power button A B Zoom in, raise volume, or increase brightness. C Zoom out, lower volume, or decrease brightness. D Page buttonscroll through the SD card Mini-USB port for AC cable, Map, Compass, Trip Information, Media slot USB Mass Storage mode, Player, and Phone Menu pages. Press and and updating software hold to adjust brightness. Resetting Your zmo E Speak buttonpress to adjust volume level. Press and hold to announce If your unit freezes up, press and hold the Power button and press. voice directions.

Configuring Your zmo

To turn on your zmo, press and hold the Power button. Follow the on-screen instructions.

Charging the Battery

To charge your zmo, connect it to a power source using the vehicle power cable or AC cable.

Acquiring Satellites

Go outdoors to an open area, away from tall buildings and trees. Turn on the zmo. Acquiring satellite signals may take a few minutes. bars indicate GPS satellite strength. When the bars are green, your zmo has acquired satellite signals, and you can start navigating.
Calibrating the Touch Screen
If the touch screen is not responding properly, calibrate the touch screen. Turn the unit off. Press and hold the Power button for about one minute until the Calibration screen appears. Follow the on-screen instructions.

Using the Menu Page

A B C A Displays satellite strength. B Displays phone and headset D E connection status. C Displays battery status. F G H I J D Touch to find a destination. E Touch to view the map. H Touch to view XM weather and F Touch to open the Phone menu (when connected to a mobile phone with radio tuner (requires antenna and subscription). Bluetooth wireless technology). I Touch to open the Media Player. G Touch to view traffic incidents (requires antenna or receiver and J Touch to adjust the settings. subscription).

Following Your Route

Touch to zoom the map in and out. Touch to open the Menu page. Touch to open the Trip Information page.
Touch to preview turns in the route. Touch to save your current location. Touch to open the Next Turn page.

Using Traffic Features

Using an optional FM TMC traffic receiver or an XM smart antenna, you can receive traffic data on your zmo. On the map, touch or to view details about a traffic delay on your current route. Touch Avoid to avoid the traffic delay. For more information about traffic and subscriptions, go to www.garmin.com/traffic.

Using the Fuel Gauge

1.On the Map page, touch Speed to open the Trip Information page. 2.Touch Reset > Miles/Kilometers Per Tank. 3. Enter amount, and touch Done. 4.A message appears when you have 30 miles (~48.3 km) remaining. Touch OK. to search for a nearby 5. Touch fuel station. 6.To reset, go to the Trip Information page, and touch the gauge > Yes.

Locking Your zmo

1.On the Menu page, touch > System > Garmin Lock. 2.Touch OK, and enter a four-digit PIN. 3.Re-enter your four-digit PIN. 4.Touch OK. 5.Drive to a security location, and touch Set. 6.Each time you turn on the zmo, enter the four-digit PIN or drive to the security location.
Using Hands-Free Features
Bluetooth wireless technology establishes a wireless link between devices, such as a mobile phone, wireless headset, and the zmo.
To pair using the zmo settings: 1.Confirm that the device is compatible with your zmo (www.garmin.com/bluetooth). 2.On the zmos Menu page, touch > Bluetooth. 3.Touch the Add/Change button next to Connect Phone or Connect Headset.
4.Enable your devices Bluetooth component, and enable Find Me/ Discoverable/Visible mode. These settings might be in a Bluetooth or Connections menu. 5.Touch OK on the zmo. 6.Select your device, and touch OK. 7.If necessary, enter the zmos Bluetooth PIN (1234) in your phone. 8.The next time you turn on your zmo, it automatically tries to pair with the last device with which it was connected.