OPERATIONS MANUAL
BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL DINSTRUCTIONS

GSS-SERIES:

PROFESSIONAL SUBWOOFER RANGE
PROFESSIONELLE SUBWOOFER STRECKE GAMA PROFESIONAL DE SUBWOOFER GAMME PROFESSIONNELLE DE SUBWOOFER

GSS-1522

GSS-18 SUB
MULTI-LANGUAGE INSTRUCTIONS:
ENGLISH....PAGE 3 DEUTSCH....PAGE 4 ESPAOL....PAGE 5 FRANCAIS....PAGE 6

GSS SUBWOOFER SERIES:

1/4 AMPLIFIER INPUT JACK PUSH-BUTTON CONNECTORS 1/4 SPEAKER CABLE FROM AMPLIFIER LINE OUT 7 1/4 AUXILIARY OUTPUT 8 1/4 SPEAKER CABLE

TERMINAL CUP

SPEAKER WIRE FROM AMPLIFIER LINE OUT TM SPEAKON SPEAKER CABLE FROM AMPLIFIER LINE OUT
SPEAKONTM INPUT JACK SPEAKONTM AUXILIARY OUTPUT
PUSH-BUTTON CONNECTORS TERMINAL CUP 4 SPEAKONTM SPEAKER CABLE 5 5
SPEAKER WIRE FROM AMPLIFIER LINE OUT 6

INTRODUCTION:

Congratulations on your purchase of a GSS-SERIES speaker, engineered & manufactured by Gemini Sound Products. This state of the art speaker is backed up by a three-year warranty.

CHAIN-LINK:

Only 1 additional speaker can be added to each speaker in a CHAINLINK setup. Connect your speakers first then follow the steps for a NORMAL setup, your AMPLIFIER should compensate for the extra speakers. SHOULD YOU EXPERIENCE ANY DIFFICULTIES OR PROBLEMS, PLEASE CALL: 1 (732) 738-9003 FOR GEMINI CUSTOMER SERVICE.

Large Carrying Handles

FEATURES:
All GSS Speakers Have the Following: Push Button Connectors Metal Corners/Full Metal Grill GSS-18 SUB: Passive 18" Subwoofer System Rubber Feet SpeakonTM Input Jacks GSS-1522: 15" Woofer with High Temp Voice Coil 160 Watt RMS 1/4 Input Jack 300 Watt RMS 35mm Stand Mount 8 Ohms Impedance

SPECIFICATIONS:

GSS-SUB: Amplifiers Output Power:....300 Wrms Frequency response:....30Hz-2kHz Impedance.....8 Ohms Components:...18" Subwoofer Dimensions:...W 21.5 x D11.25 x H25.4 (546x 740 x 646mm) Features:.SpeakonTM Input Jacks, Carrying handles, Push button connectors,...Rubber feet, Metal Corners/Full metal grill Weight:...77 lbs (35 kg) GSS-1522: Amplifiers Output Power:....160 Wrms Frequency response:...32Hz-20kHz Impedance:....8 Ohms Components:...15" Woofer 12" x 4" horn & two 3" tweeters Dimensions:..W 24.5 x D 20.25 x H 33.5 (622 x 515 x 851 mm) Features:.1/4 TRS Jacks, Push button connectors, Metal Corners/Full metal grill Weight:...63 lbs (28.6 kg)
12" x 4" horn & two 3" tweeters 8 Ohms Impedance

CAUTIONS:

1. All operating instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. There are, NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified Gemini Sound Products service technician.
In the USA: If you experience problems with this unit, please call 1 (732) 738-9003 for Gemini Customer Service. Do not attempt to return this equipment to your dealer.
SPECIFICATIONS AND DESIGN ARE SUBJECT TO CHANGE WITHOUT NOTICE FOR PURPOSE OF IMPROVEMENT.
3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES.

CONNECTIONS:

PLEASE NOTE IT IS VERY IMPORTANT THAT YOUR AMPLIFIER HAS MATCHED POWER RATINGS! Make sure your equipment is completely OFF and also lower ALL VOLUME, LEVEL, & GAIN controls and before connecting the speaker. 1. Use a 1/4" SPEAKER or SPEAKONTM CABLE (1) from your AMPLIFIER LINE OUTPUT (2) to connect to your speakers 1/4" AMPLIFIER INPUT JACK (3) or SPEAKONTM CABLE INPUT (3). 2. Another way to connect your AMPLIFIER to your speaker is the TERMINAL CUP (4). Use the PUSH-BUTTON CONNECTORS (5) to connect the POSITIVE (-) and NEGATIVE (-) ends of a standard SPEAKER WIRE (6) with a 12-GAUGE minimum thickness from your AMPLIFIER LINE OUTPUT (2) to your speakers TERMINAL CUP (4). 3. You can also use the additional 1/4 AUXILIARY or SPEAKONTM OUTPUT JACK (7) to CHAIN-LINK an additional speaker using an additional 1/4" SPEAKER CABLE (8).

OPERATION:

The speakers can be used in pairs for a NORMAL setup, or in groups of four when CHAIN-LINKED together.

NORMAL SETUP:

1. Now turn on your MIXER or other signal source. 2. Then turn on your AMPLIFIER and increase the VOLUME or GAIN control as recommended by the AMPLIFIERS owner manual. 3. Start playing from your TURNTABLE, CD PLAYER, MIC, etc. and adjust the volume controls from your mixer to a reasonable level.

EINFHRUNG:

Glckwnsche auf Ihrem Erwerb eines GSM-REIHE Lautsprechers, ausgefhrt u. durch Gemini Sound Produkte hergestellt. Dieser Zustand des kunstlautsprechers wurde durch eine dreijhrige Garantie untersttzt.
3. Fangen Sie an, von Ihrer DREHSCHEIBE, von DIGITALSCHALLPLATTE SPIELER, von MIC, von ETC. zu spielen und justieren Sie die Lautstrkeregler von Ihrem Mischer auf ein angemessenes Niveau.

KETTE-VERBINDUNG:

Nur 1 zustzlicher Lautsprecher kann jedem Lautsprecher in einer KETTENVERBINDUNG Einstellung hinzugefgt werden. Schlieen Sie Ihre Lautsprecher zuerst folgen dann den Schritten fr eine NORMALE Einstellung, Ihr VERSTRKER sollte die Extralautsprecher entschdigen an.
WENN SIE JEDES MGLICHES SCHWIERIGKEITEN ODER PROBLEME ERFAHREN, BENENNEN SIE BITTE: 1 (732) 738-9003 FR ZWILLING-KUNDENDIENST.

FUNKTIONEN:

Alle GSM Lautsprecher haben das folgende: Stotaste Stecker MetallcEcken/Voll MetallcGrill GSS-18 SUB: System Des Passiv-18" Subwoofer GummicFe SpeakonTM Eingang Steckfassungen Groe Tragende Handgriffe 300 Watt Effektivwert 35mm Standplatz-Einfassung 8 Ohms Impedance
GSS-1522: 15" Woofer mit hoher Temperatur Sprachspule 12" x 4" horn & zwei 3" tweeters 160 Watt Effektivwert 8 Ohms Impedance 1/4 TRS Eingang Steckfassungen

CONNEXIONS:

NOTE IL VEUILLEZ TRE TRS IMPORTANT QUE VOTRE AMPLIFICATEUR AIT ASSORTI DES ESTIMATIONS DE PUISSANCE! Sassurent votre quipement est compltement au LOIN et galement infrieur TOUS les VOLUME, NIVEAU, et COMMANDES de GAIN et avant de relier le haut-parleur. 1. Employez un 1/4" SPEAKER CABLE (1) ou le CBLE de SPEAKONTM (1) de votre AMPLIFIER LINE OUTPUT (2) pour se relier votre 1/4" AMPLIFIER INPUT JACK (3) de haut-parleurs ou du CBLE de SPEAKONTM (3). 2. Une autre manire de relier votre AMPLIFICATEUR votre haut-parleur est la TERMINAL CUP (4). Utilisez les PUSH-BUTTON CONNECTORS (5) pour relier le POSITIVE (-) et les extrmits NEGATIVE (-) dun SPEAKER WIRE (6) avec une paisseur 12-GAUGE minimum de votre AMPLIFIER LINE OUTPUT (2) dans votre TERMINAL CUP (4) de haut-parleurs. 3. Vous pouvez galement employer le CHANE-LIEN additionnel du 1/4 AUXILIARY OUTPUT JACK (7) un haut-parleur additionnel en utilisant un 1/4" SPEAKER CABLE (8) ou le CBLE de SPEAKONTM (8) additionnel.
INSTRUCTIONS DEXPLOITATION:
Les haut-parleurs peuvent tre employs dans les paires pour une installation NORMALE, ou dans les groupes de quatre une fois CHANE-LIS ensemble.

INSTALLATION NORMALE:

1. Tournez maintenant dessus votre MLANGEUR ou toute autre source de signal. 2. Mettez alors en marche votre AMPLIFICATEUR et augmentez le VOLUME ou GAGNEZ la commande comme recommand par le manuel de

NOTES:

Gemini Sound Products Corp. 120 Clover Place P.O. Box 6928 Edison, NJ 08818-6928 732-738-9003 (Phone) 732-738-9006 (Fax)
In the USA: If you experience problems with this unit, call 1-732-738-9003 for Gemini Customer Service.
Do not attempt to return this equipment to your dealer.
Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products Corp. It is recommended that all maintenance and service on this product is performed by Gemini Sound Products Corp. or its authorized agents. Gemini Sound Products Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.

Worldwide Headquarters 120 Clover Place, Edison, NJ 08837 USA Tel: (732) 738-9003 Fax: (732) 738-9006
France G.S.L. France 11, Avenue Leon Harmel, Z.I. Antony, 92160 Antony, France Tel: + 33 (0) 70 Fax: + 33 (0) 80 Germany Gemini Sound Products GmbH Liebigstr. 16, Haus B - 3.0G 85757 Karlsfeld, Germany Tel: 08131 - 39171-0 Fax: 08131 - 39171-9 UK Gemini Sound Products Unit C4 Hazleton Industrial Estate, Waterlooville, UK P08 9JU Tel: 00880 Fax: 00990 Spain Gemini Sound Products S.A. Rosello, 516, Barcelona, Spain, 08026 Tel: 349-3435-0814 Fax: 3493-347-6961
Gemini Sound Products Corp. 2003 All Rights Reserved.

CGH40180PP

180 W, RF Power GaN HEMT
Crees CGH40180PP is an unmatched, gallium nitride (GaN) high electron mobility transistor (HEMT). The CGH40180PP, operating from a 28 volt rail, offers a general purpose, broadband solution to a variety of RF and microwave applications. GaN HEMTs offer high efficiency, high gain and wide bandwidth capabilities making the CGH40180PP ideal for linear and compressed amplifier circuits. The transistor is available in a 4-lead flange package.
Package Type s: 440199 PN: CGH4018 0PP

FEATURES

Up to 2.5 GHz Operation 20 dB Small Signal Gain at 1.0 GHz 15 dB Small Signal Gain at 2.0 GHz 220 W typical PSAT 70 % Efficiency at PSAT 28 V Operation

APPLICATIONS

2-Way Private Radio Broadband Amplifiers Cellular Infrastructure Test Instrumentation Class A, AB, Linear amplifiers suitable for OFDM, W-CDMA, EDGE, CDMA waveforms

2011 Rev 1.2 May

Subject to change without notice. www.cree.com/wireless
Absolute Maximum Ratings (not simultaneous) at 25C Case Temperature
Parameter Drain-Source Voltage Gate-to-Source Voltage Storage Temperature Operating Junction Temperature Maximum Forward Gate Current Soldering Temperature1 Screw Torque Thermal Resistance, Junction to Case2 Case Operating Temperature2,3
Symbol VDSS VGS TSTG TJ IGMAX TS
Rating 84 -10, +2 -65, +80 0.9 -40, +150
Units Volts Volts C C mA C in-oz C/W C

RJC TC

Note: 1 Refer to the Application Note on soldering at www.cree.com/products/wireless_appnotes.asp 2 CGH40180PP at PDISS = 224 W. 3 See also, the Power Dissipation De-rating Curve on Page 6.
Electrical Characteristics (TC = 25C)
Characteristics DC Characteristics1 Gate Threshold Voltage Gate Quiescent Voltage Saturated Drain Current

Symbol

Conditions

VGS(th) VGS(Q) IDS VBR

-3.8 46.4 120

-3.3 -3.0 56.0

-2.3

VDC VDC A VDC

VDS = 10 V, ID = 57.6 mA VDS = 28 V, ID = 2.0 A VDS = 6.0 V, VGS = 2.0 V VGS = -8 V, ID = 57.6 mA
Drain-Source Breakdown Voltage RF Characteristics Small Signal Gain Power Output at Saturation Drain Efficiency6 Output Mismatch Stress Dynamic Characteristics7 Input Capacitance Output Capacitance Feedback Capacitance
(TC = 25C, F0 = 1.3 GHz unless otherwise noted) GSS PSAT

17.50

10 : 1

dB W % Y

VDD = 28 V, IDQ = 2.0 A VDD = 28 V, IDQ = 2.0 A VDD = 28 V, IDQ = 2.0 A, POUT = PSAT No damage at all phase angles, VDD = 28 V, IDQ = 2.0 A, POUT = 180 W CW

CGS CDS CGD

35.7 9.6 1.6

pF pF pF

VDS = 28 V, Vgs = -8 V, f = 1 MHz VDS = 28 V, Vgs = -8 V, f = 1 MHz VDS = 28 V, Vgs = -8 V, f = 1 MHz
Notes: 1 Measured on wafer prior to packaging. 2 Scaled from PCM data. 3 Measured in CGH40180PP-TB, including all coupler losses. 4 IDQ of 2.0 A is by biasing each device at 1.0 A. 5 PSAT is defined as: Q1 or Q2 = IG = 2.8 mA. 6 Drain Efficiency = POUT / PDC 7 Capacitance values are for each side of the device.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.869.CREE Fax: +1.919.869.2733 www.cree.com/wireless
Copyright 2009-2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
CGH40180PP Rev 1.2 Preliminary

Typical Performance

Gain and Return Loss vs Frequency of the CGH40180PP measured in Broadband Amplifier Circuit CGH40180PP-TB VDD = 28 V, IDQ = 2.0 A, Freq = 0.8 - 1.7 GHz S-parameter CGH40180PP

21 S21 18

-5 S11

S21 (dB)

9 SS11 3

1500 1600

-30 1700

Frequency (MHz)

Output Power and Drain Efficiency vs Frequency of the CGH40180PP measured in Broadband Amplifier Circuit CGH40180PP-TB VDD and Efficiency vs Frequency Power= 28 V, IDQ = 2.0 A
Psat 100% 90% 80% 70% 60% 50% 40% Psat Efficiency 30% 20% 10% 0% 1300

Output Power (W)

100 1100

Drain Efficiency

S11 (dB)
Gain and Drain Efficiency vs Output Power of the CGH40180PP in Broadband Amplifier Circuit CGH40180PP-TB VDD = 28 V, IDQ = 2.0 A
22 gain eff 1100 gain 1150 eff 1150 gain 1200 eff 1200 gain 1250 eff 1250 gain 1300 eff 1300 70% 80%

18 Gain

14 Drain Efficiency

Output Power (dBm)

Gain (dB)
Simulated Maximum Available Gain and K Factor of the CGH40180PP VDD = 28 V, IDQ = 1.0 A

MAG (dB)

Typical Noise Performance
Simulated Minimum Noise Figure and Noise Resistance vs Frequency of the CGH40180PP VDD = 28 V, IDQ = 1 A
Minimum Noise Figure (dB)
Electrostatic Discharge (ESD) Classifications
Parameter Human Body Model Charge Device Model

Symbol HBM CDM

Class 1A > 250 V 1 < 200 V

Noise Resistance (Ohms)

Test Methodology JEDEC JESD22 A114-D JEDEC JESD22 C101-C

K Factor

CGH40180PP Power Dissipation De-rating Curve
CGH40180PP CW Power Dissipation De-rating Curve

Power Dissipation (W)

100 Note 1 50

225 250

Maximum Case Temperature (C)
Note 1. Area exceeds Maximum Case Operating Temperature (See Page 2).
CGH40180PP Transient Power Dissipation De-rating Curve
CGH40180PP Transient Power Dissipation De-Rating Curve
Note 1. Area exceeds Maximum Case Operating Temperature (See Page 2). Note 2. This transient de-rating curve assumes a 1msec pulse with a 20% duty cycle with no power dissipated during the off-cycle.
Thermal Resistance as a Function of Pulse Width
Heating Curve for 2x28.8mm GaN HEMT in 440199 Package at 4W/mm
1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1.00E-08

Rth (C/W)

1.00E-07

1.00E-06

1.00E-05

1.00E-04

1.00E-03

1.00E-02

1.00E-01

1.00E+00

Time (seconds)
Note 1: This heating curve assumes zero power dissipation during the off portion of the duty cycle. Note 2: This data is for transient power dissipation at 224 W, Duty Cycle = 20 %.
Simulated Source and Load Impedances
D1 Z Source 1 G1 Z Load 1
G2 Z Source 2 D2 Z Load 2
Frequency (MHz) 2500 3000
Z Source 2.85 + j1.99 0.8 + j0.42 0.84 - j1.69 0.88 - j3.05 1.08 - j4.5 1.25 - j6.06
Z Load 5.27 + j0.68 4.91 + j0.36 4.65 - j0.24 2.8 - j1.05 3.1 - j2.47 3.1 - j4.01
Note 1. VDD = 28V, IDQ = 2.0 A in the 440199 package. Note 2. Optimized for power gain, PSAT and PAE. Note 3. When using this device at low frequency, series resistors should be used to maintain amplifier stability.
CGH40180PP-TB Demonstration Amplifier Circuit Schematic
CGH40180PP-TB Demonstration Amplifier Circuit Outline
CGH40180PP-TB Demonstration Amplifier Circuit Bill of Materials
Designator R1 R10,R20 R30,R40 C1,C2,C3,C4,C30,C40,C70,C80 C10,C11,C13,C14,C20,C21,C23,C24 C12,C22 C15,C19,C25,C29 C16,C26 C17,C27 C31,C41 C32,C42 C34,C44,C72,C82 C35,C45 C50,C51,C60,C61 C52,C62 C53,C63 C54,C64 C55,C65 C73,C83 C74,C84 L10,L20 L30,L40 J1,J2 J3,J4 Q1
Description RES, 100 Ohm, +/-1%, 1 W, 2512 RES, 511 Ohm, +/- 5%, 1/16W, 0603 RES, 1/16W, 0603, 1%, 5.1 OHMS CAP, 27 pF,+/-5% 0805,ATC600F CAP, 3.9PF, +/-0.1 pF, 0603, ATC600S CAP, 3.3PF, +/-0.1 pF, 0603, ATC600S CAP, 1.8PF, +/-0.1 pF, 0603, ATC600S CAP, 1.0PF, +/-0.1 pF, 0603, ATC600S CAP, 0.9PF, +/-0.1 pF, 0603, ATC600S CAP, 100 pF,+/-5%, 0603,ATC600S CAP, 470 pF, 5%, 100V, 0603, X7R CAP, 33000 pF, 0805, 100V, X7R CAP, 10 uF, 16V, TANTALUM CAP, 5.6 pF, +/-0.1 pF, 0805, ATC600F CAP, 2.7 pF, +/-0.1 pF, 0805, ATC600F CAP, 2.2 pF, +/-0.1 pF, 0805, ATC600F CAP, 1.1 pF, +/-0.05 pF, 0805, ATC600F CAP, 0.5 pF, +/-0.05 pF, 0805, ATC600F CAP, 1.0 uF, +/-10%, 1210, 100V, X7R CAP, 33 uF, 100V, ELECT, FK, SMD IND, 6.8 nH, 0603, L-14C6N8ST FERRITE, 220 OHM, 0603, BLM21PG221SN1 CONN, N-Type, Female, 0.500 SMA Flange CONN, Header, RT> PLZ, 0.1 CEN, LK, 9 POS PCB, RO4350, Er = 3.48, h = 20 mil CGH40180PP

Qty 1 1

CGH40180PP-TB Demonstration Amplifier Circuit
Typical Package S-Parameters for CGH40180PP, Single Side (Small Signal, VDS = 28 V, IDQ = 1000 mA, angle in degrees)
Frequency 500 MHz 600 MHz 700 MHz 800 MHz 900 MHz 1.0 GHz 1.1 GHz 1.2 GHz 1.3 GHz 1.4 GHz 1.5 GHz 1.6 GHz 1.7 GHz 1.8 GHz 1.9 GHz 2.0 GHz 2.1 GHz 2.2 GHz 2.3 GHz 2.4 GHz 2.5 GHz 2.6 GHz 2.7 GHz 2.8 GHz 2.9 GHz 3.0 GHz 3.2 GHz 3.4 GHz 3.6 GHz 3.8 GHz 4.0 GHz 4.2 GHz 4.4 GHz 4.6 GHz 4.8 GHz 5.0 GHz 5.2 GHz 5.4 GHz 5.6 GHz 5.8 GHz 6.0 GHz Mag S11 0.957 0.957 0.957 0.957 0.957 0.957 0.957 0.957 0.957 0.956 0.956 0.956 0.956 0.955 0.955 0.955 0.954 0.954 0.953 0.952 0.952 0.951 0.950 0.949 0.948 0.946 0.943 0.939 0.935 0.929 0.922 0.913 0.901 0.886 0.866 0.838 0.799 0.742 0.658 0.534 0.373 Ang S11 -177.48 -178.74 -179.78 179.32 178.51 177.76 177.06 176.38 175.72 175.08 174.44 173.81 173.18 172.55 171.91 171.27 170.62 169.96 169.29 168.60 167.90 167.18 166.45 165.69 164.91 164.10 162.39 160.55 158.53 156.31 153.83 151.03 147.82 144.10 139.68 134.36 127.78 119.49 108.92 95.85 82.93 Mag S21 4.22 3.51 3.00 2.62 2.33 2.09 1.90 1.73 1.60 1.48 1.38 1.29 1.22 1.15 1.09 1.04 0.99 0.95 0.91 0.87 0.84 0.82 0.79 0.77 0.75 0.73 0.71 0.69 0.67 0.67 0.67 0.68 0.69 0.72 0.76 0.81 0.88 0.97 1.08 1.21 1.34 Ang S21 79.26 76.30 73.47 70.74 68.08 65.49 62.95 60.46 58.02 55.63 53.29 50.98 48.72 46.50 44.32 42.17 40.06 37.98 35.93 33.91 31.92 29.95 28.00 26.07 24.15 22.24 18.45 14.64 10.80 6.86 2.78 -1.51 -6.12 -11.16 -16.81 -23.30 -30.99 -40.41 -52.33 -67.76 -87.69 Mag S12 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.007 0.008 0.008 0.008 0.008 0.008 0.009 0.009 0.009 0.010 0.010 0.011 0.011 0.012 0.013 0.013 0.014 0.015 0.016 0.018 0.020 0.023 0.027 0.031 0.036 0.042 0.049 0.059 0.073 0.091 0.117 0.157 0.219 0.321 Ang S12 10.74 12.14 13.71 15.38 17.15 18.99 20.87 22.80 24.73 26.66 28.57 30.44 32.25 33.98 35.62 37.17 38.61 39.93 41.14 42.22 43.18 44.01 44.73 45.32 45.79 46.15 46.53 46.47 45.97 45.03 43.63 41.72 39.23 36.07 32.05 26.92 20.30 11.55 -0.34 -16.90 -40.38 Mag S22 0.798 0.800 0.802 0.804 0.807 0.809 0.812 0.814 0.817 0.820 0.823 0.825 0.828 0.831 0.833 0.835 0.838 0.840 0.842 0.844 0.845 0.847 0.848 0.849 0.850 0.850 0.851 0.850 0.848 0.845 0.841 0.834 0.825 0.813 0.797 0.775 0.747 0.708 0.657 0.594 0.534 Ang S22 -179.16 -179.41 -179.63 -179.84 179.96 179.74 179.52 179.28 179.03 178.76 178.46 178.15 177.82 177.47 177.10 176.71 176.30 175.87 175.42 174.95 174.47 173.96 173.44 172.89 172.33 171.74 170.51 169.19 167.76 166.21 164.53 162.69 160.65 158.39 155.86 153.00 149.76 146.16 142.31 138.62 134.70

Download this s-parameter file in.s2p format at http://www.cree.com/products/wireless_s-parameters.asp
Product Dimensions CGH40180PP (Package Type 440199)

Disclaimer

Specifications are subject to change without notice. Cree, Inc. believes the information contained within this data sheet to be accurate and reliable. However, no responsibility is assumed by Cree for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Cree. Cree makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose. Typical parameters are the average values expected by Cree in large quantities and are provided for information purposes only. These values can and do vary in different applications and actual performance can vary over time. All operating parameters should be validated by customers technical experts for each application. Cree products are not designed, intended or authorized for use as components in applications intended for surgical implant into the body or to support or sustain life, in applications in which the failure of the Cree product could result in personal injury or death or in applications for planning, construction, maintenance or direct operation of a nuclear facility.
For more information, please contact: Cree, Inc. 4600 Silicon Drive Durham, NC 27703 www.cree.com/wireless Ryan Baker Marketing Cree, RF Components 919.407.7816 Tom Dekker Sales Director Cree, RF Components 919.407.5639