Channel mixer with USB

PS-626USB
OPERATIONS MANUAL MANUAL DE INSTRUCCIONES MANUEL DINSTRUCTIONS BEDIENUNGSHANDBUCH
FOR ENGLISH READERS PARA LECTORES EN ESPAOL UTILISATEURS FRANCAIS FR DEUTSCHE LESER Page 2 ~ Page 5 Pgina 6~ Pgina 9 Page 10 ~ Page 13 Seite 14 ~ Seite 17
PLEASE READ BEFORE USING APPLIANCE IMPORTANT WARNING AND SAFETY INSTRUCTIONS!

CAUTION

RISK OF ELECTRIC SHOCK DO NOT OPEN!
CAUTION: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and connectors for connections. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. CART: A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. See Figure A. VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. GROUNDING OR POLARIZATION: If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

Fig. A

POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure B. LIGHTNING: For added protection for this product during a lightening storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightening and power-line surges. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way. When the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:

Fig. B

PS-626USB TOP

INTRODUCTION:

Congratulations on your purchase of Gemini PS-626USB channel stereo mixer. This-state-of-the-art mixer features the latest technological advances and is backed by a 1 year warranty, excluding the cross fader. The cross fader is backed by a separate 90 day warranty. Prior to use we suggest that you carefully read all the instructions.

FEATURES:

- Stereo channel mixer - 6 line, 2 convertible phono/line, RCA inputs, 1 USB i/o - Removable face plate for user replaceable Rail Glide cross fader - 3 band rotary line EQ with cut feature & rotary gain channel control - Cue Ch1/Ch2/Ch3 switch - Rotary cue volume, CUE/PGM rotary knob - Dual VU display with mode switch - Master volume rotary control
CONVERTIBLE PHONO/LINE INPUTS The PS-626USB has 2 CONVERTIBLE PHONO/LINE (PH/LN) RCA INPUTS These small switches which are located to the right of the RCA inputs for channels 1 and 2 allow you to choose between a PHONO (Turntable) input or a LINE level (Mp3, CD, Tape player etc.).and require the proper switching. When switched to the PH position you may use any Turntable with a magnetic cartridge, remember to connect your ground wire (see GROUNDING SCREW) or there may be a system hum And when the switch is in the LN position you may connect any line level device as described before (Mp3, CD, Tape etc).
NOTE: CONNECTING A LINE LEVEL DEVICE TO A PH INPUT MAY CAUSE THAT MIXER CHANNEL TO OVERLOAD AND OR DISTORT.

PRECAUTIONS:

1. All instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. Please refer all servicing needs to a Gemini-qualified service technician.
IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT: 1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER.
Now you may plug the RCAs from your playable medium into each input to be connected to thier respective CHANNELS (CH).
GROUNDING SCREW When using (a) turntable(s), you will need to ground the RCA cable(s) by screwing in the grounding fork(s) to the GROUNDING SCREW located on the rear panel of the PS-626USB mixer. Attach a PHONO (Turntable) ground line to the silver GROUND THUMB SCREW that is situated at the bottom middle of the rear panel.
3. Do not expose this unit to direct sunlight or a heat source such as a radiator or stove. 4. This unit should be cleaned only with a damp cloth. Avoid solvents or other cleaning detergents. 5. When moving this equipment it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE SPRAY CLEANERS OR LUBRICANTS ON CONTROLS, SURFACES OR SWITCHES.

MIC (MICROPHONE) INPUT The main MIC or Microphone input is located in back right hand corner of the PS-626USB and will accept a standard 1/4 connector. You can control the gain and even set the lows and the highs for the mic (See CONTROLS ).
HEADPHONE OUTPUT The HEADPHONE OUTPUT located at the front bottom right hand corner of the PS-626USB will accept any headphone with a standard 1/4 connector and or adaptor and will allow you to CUE your music program before you play it, you can adjust the volume and PGM mix of the HEADPHONE (see CONTROLS). Then when all of your connections have been made turn on the mixer by pressing the POWER SWITCH.

CONNECTIONS:

Ensure that the POWER SWITCH is in the OFF position prior to making any connections. POWER SUPPLY This unit comes with a POWER SUPPLY. Plug in to the rear panel POWER SUPPLY socket before plugging it in to a proper power source. The MASTER RCA OUTPUT connects the mixer to your main amplifier using standard audio cables with RCA-type connectors. The RECORD RCA OUTPUT The RECORD output jacks can be used to connect the mixer to the record input of your recording unit, thus enabling you to record your mix with RCA cables. USB i/O The USB i/O allows you to connect the PS-626USB to your Laptop or desktop PC/MAC. Once you have connected the standard high speed USB cable (not-included) from the PS-626USB to your computer you will be able to simultaneously playback and record out of the same USB cable, (see USB setup for instructions on how to setup your computer to work with the PS-626USB).

CONTROLS:

MICROPHONE VOLUME Allows you to adjust the volume of the microphone signal. MICROPHONE EQ Lets you to control the low frequency and the high frequency of the microphone signal.

MIXER CHANNEL

(NOTE: ALL 3 CHANNELS HAVE THE SAME FEATURES)
CHANNEL INPUT SELECTOR The CHANNEL INPUT SELECTOR switches allow you to choose which input will be controlled by that channels corresponding volume FADER. For example on CHANNEL (1) the INPUT SELECTOR allows you to choose between PHONO 1/LINE 1 and LINE 2 , and also on CHANNEL (2) the INPUT SELECTOR SWITCH will let you choose between PHONO 2/LINE 3 and LINE 4 and on CHANNEL (3) you can choose between LINE 5 and the USB input.

(CONTINUED)

USB SETUP:
ON A PC Open the START menu and go to CONTROL PANEL, once in the control panel folder click on the SOUND AND AUDIO DEVICES ICON, when the SOUND AND AUDIO DEVICES window opens click on the AUDIO pane, then under SOUND PLAYBACK choose the USB AUDIO CODEC as a DEFAULT DEVICE,then you just click on APPLY and you are ready to use the PS-626USB with your PC.
CHANNEL ROTARY GAIN The CHANNEL ROTARY GAIN allows you to boost the signal of each individual channel depending on how low or high its input level is 3 BAND EQUALIZER The 3 BAND EQUALIZER adjust the tone of each CHANNEL by giving you a choice 3 frequencies (BANDS) to adjust , from LOW, MIDRANGE (MID) and HIGHs ,you can use the adjustment knobs to higher or lower the 3 separate frequencies till the sound of the music program is appropriate for your listening environment. CHANNEL VOLUME FADER After you have chosen which input you will use with the INPUT SELECTOR the corresponding CHANNEL FADER will allow you to adjust the volume for that particular CHANNEL. FADER ADJUSTMENT SWITCHES The fader adjustment switches allow you to change the functionality of the fader. The REVERSE switch when in the ON position will flip the fader so it works in REVERSE ie. channel (1) on the left and channel (2) on the right. The CURVE selector lets you choose between two fader CURVE settings, positioning the switch to the left will give you a gradual CROSSFADE and positioning the switch to the right will give you a quick CROSSFADE. CROSS FADER The CROSS FADER allows you to mix evenly from one source to another. On the PS-626USB The CROSS FADER is assignable between all (5) channels. The CROSS FADER on the PS-626USB is also removable and if the need arises can be replaced.The RG-45 (RAILGLIDE) DUAL-RAIL CROSS FADER, which has internal dual stainless steel rails that allow the slider to ride smoothly and accurately from end to end can be purchased from your local GEMINI dealer. NOTE: WHEN USING THE CROSS FADER LIGHTLY GLIDE THE FADER BACK AND FORTH. PRESSING DOWN ON THE CONTROLS CAN BEND CONTACTS AND CAUSE A LOSS OF SOUND.

Save postage and register your product online at www.geminidj.com and automatically be registered for great prize giveaways!
If you do not have internet access, fill out the form below and mail to the appropriate address listed at the right side of this page.
GEMINI SOUND PRODUCTS Worldwide Headquarters 1 Mayfield Ave Edison, NJ 08837 USA Tel: (732) 346-0061 Fax: (732) 346-0065

FRANCE

GCI TECHNOLOGIES S.A.R.L 1, Allee dEffiat, Parc de levnement, 91160 Longjumeau, France Tl: + Fax: + 97 80

First Name:

Initial:

Last Name:

Address: (Number and Street) City:

Apt #: State: or

Province:

GERMANY

GCI TECHNOLOGIES Liebigstr. 16, Haus B 3. OG, 85757 Karlsfeld Germany Tel: 0 Fax: 8

Country:

Zip Code: or

Postal Code:

E-mail Address: Phone #:
___________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
Date of Birth Month Day Year.00 (EXCLUDING TAX)
Date of Purchase: Month Dealer: City: Model Number: (Example: CDT-05) Day Year

Purchase Price:

GEMINI SOUND PRODUCTS Unit C4 Hazleton Industrial Estate, P08 9JU Waterlooville, UK Tel: 00880 Fax: 00990
Serial Number: (Located on back of most units)
Cut along this line & keep the rest of this page for your records.
GEMINI SOUND PRODUCTS S.A. Rosello, 516, 08026 Barcelona, Spain Tel: 3493-00 Fax: 3493-347-6961

WARRANT Y AND REPAIR:

All Gemini products are designed and manufactured to the highest standards in the industry. With proper care and maintenance, your product will provide years of reliable service.

RETURN/REPAIR

A. In the U.S.A., please call our helpful Customer Service Representatives at (732)738-9003, and they will be happy to give you a Return Authorization Number (RA#) and the address of an authorized service center closest to you. B. After receiving an RA#, include a copy of the original sales receipt, with defective product and a description of the defect. Send by insured freight to: Gemini Sound Products Corp, and use the address provided by your customer service representative. Your RA# must be written on the outside of the package, or processing will be delayed indefinitely! C. Service covered under warranty will be paid for by Gemini and returned to you. For non-warrantied products, Gemini will repair your unit after payment is received. Repair charges do not include return freight. Freight charges will be added to the repair charges. D. On warranty service, you pay for shipping to Gemini, we pay for return shipping within the Continental United States. Alaska, Hawaii, Puerto Rico, Canada, Bahamas, and the Virgin Islands will be charged for freight. E. Please allow 2-4 weeks for return of your product. Under normal circumstances your product will spend no more than 10 working days at Gemini. We are not responsible for shipping times.

LIMITED WARRANT Y

A. Gemini warrants its products to be free from defects in materials and workmanship for One (1) year from the original purchase date. Exceptions: Laser assemblies on CD Players, cartridges, and crossfaders are covered for 90 days. B. This limited warranty does not cover damage or failure caused by abuse, misuse, abnormal use, faulty installation, improper maintenance or any repairs other than those provided by an authorized Gemini Service Center. C. There are no obligations of liability on the part of Gemini for consequential damages arising out of or in connection with the use or performance of the product or other indirect damages with respect to loss of property, revenues, of profit, or costs of removal, installation, or reinstallation. All implied warranties for Gemini, including implied warranties for fitness, are limited in duration to One (1) year from the original date of purchase, unless otherwise mandated by local statutes.
IN THE USA: IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT, CALL 1-732-346-0061 FOR GCI TECHNOLOGIES CUSTOMER SERVICE. DO NOT ATTEMPT RETURN THIS EQUIPMENT TO YOUR DEALER.
Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. GCI Technologies Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of GCI Technologies Corp. It is recommended that all maintenance and service on this product is performed by GCI Technologies Corp. or its authorized agents. GCI Technologies Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.

Worldwide Headquarters 1 Mayfield Ave, Edison, NJ 08837 USA Tel: (732) 346-0061 Fax: (732) 346-0065
France GCI technologies France S.AR.R.L 1, Alle dEffiat, Parc de levnement, 91160 Longjumeau, France Tl: + Fax: + Germany GCI Technologies GmbH Lerchenstrasse 14 , Haus 3 1. Stock , 80995 Mnchen, Germany Tel: 49 (0) Fax: 08131 - 39171-9 UK GCI Technologies 44 The Brambles Enterprise Centre, PO7 7TH Waterlooville, UK Tel: 00880 Fax: 00990 Spain GCI Technologies S.A. Rosello, 516, 08026 Barcelona, Spain, Tel: 349-3435-0814 Fax: 3493-347-6961
GCI Technologies Corp. 2007 All Rights Reserved.

CD/MP3/USB

CDMP-6000
Professional Dual CD/MP3/ USB Mixing Console
The CDMP-6000 CD/MP3/USB Mixing Console from top to bottom gives the DJ all the tools they need at their fingertips. Geminis CDMP-6000 is the ultimate allin-one solution providing our most reliable platform along with digital connection via

GROOVE

built-in USB inputs for the ability to play and manipulate songs directly from a USB Key and MP3 player. The CDMP-6000 also comes with DVD-rom drives to give DJs the flexibility and convenience of both CDs
Minimum System Requirements: Windows XP / Vista CPU > 1.6 GHz 256 MB RAM
Professional PC Mixing Software
MP3, WMA, Ogg Vorbis, Wave support Full midi and keyboard controller support * Automix with fader start Full, feature mixer w/3 band EQ and kills Instant-start & cue with preview Looping with dedicated loop times +/- 32% Pitch with master tempo Single & continuous play modes 3 Hot cue points for each channel Reverse audio playback Auto BPM calculation w/TAP Vinyl scratch emulation Delay, flanger, phaser and reverb Playlist support with powerful database features iTunes type cover flow Powerful music search engine Overhead waveform display w/zoom and beat marking High quality mix session recorder Built in language support for English, German, Spanish, French and Italian

and MP3s!

Player Section
* Pre-Mapped for QWERTY, QWERTZ and AZERTY
computer keyboard as well as built in support for CTRL-ONE, CTRL-SIX, e-mix MP1200, Behringer BCD3000, Hercules DJ Console RMX, Hercules DJ Control Steel, Hercules DJ Control MPS, Hercules DJ Console MK2, Vestax VCM-100 and Vestax VCI-100 midi controllers.
Audio CD, CD-R, MP3 compatible Plays MP3 and WAV files from USB storage device* Anti-shock using RAM buffer memory 3 Selectable Jog modes Pitch bend/Search/Scratch effect Multifunction scroll knob for MP3 folder navigation Instant-start & cue with preview Single, continuous and repeat play modes One seamless loop per side with reloop BPM (TAP) read out Pitch bend via jog wheel or buttons +/- 24% Two mode time selection Frame accurate search One USB port per side Variable pitch control with three settings +/- 8,16 & 24%

Mixer Section

3-band EQ w/ Gain control 1/4 headphone output XLR and 1/4 mic input Auxiliary inputs for phono or line devices
Dimensions: 19 x 10.2 x 4.3 (482 x 260 x 110 mm) Weight: 12.1 lbs (5.5 kg)
* FAT, FAT32, NTFS formatted storage devices

True Continuous Play

Specifically designed for mobile DJs who require a compact, portable system with minimal setup time, the CDM-3610 professional tabletop dual-deck CD/MP3 player mixer combo is the ultimate in affordable and capable all-in-one units. The new CDM-3610 delivers optimum functionality, ease, and creativity in a unit perfect for DJs on the go.
Player Section: Audio CD & CD-R compatible Mechanical anti-shock Large blue backlit LCD display 2 Selectable Jog modes Search & Pitch bend Instant-start & cue with preview Fader-Start capability +10 track button for quick navigation Single & continuous play modes One seamless loop per side with reloop Pitch bend via jog wheel or buttons +/- 16% Three mode time selection Frame accurate search Rubber jog wheels with finger grips Variable pitch control with a +/- 12% range Mixer Section: 2-band EQ w/ Gain control 1/4 headphone output XLR balanced outputs and 1/4 mic input Auxiliary inputs for line devices Dimensions: 19 x 10.2 x 4.3 (482 x 260 x 110 mm) Weight: 12.1 lbs (5.5 kg)

CDMP-1400

Professional 1U Single CD/MP3/USB Player with Remote Control
Slot-in CD/MP3/USB player Audio CD, CD-R, DVD, MP3 compatible Plays MP3 and WAV files from USB storage device* Balanced XLR outputs, RCA line output and record output front MIC input, rear combo XLR and MIC input IR Remote control w/volume control Anti-shock using RAM buffer memory Multifunction scroll knob for MP3 folder navigation Auto BPM read out Instant-start & cue with preview Single & continuous play modes Seamless loop with reloop Pitch bend buttons and rotary knob Two mode time selection Frame accurate search Bright VFD display Variable pitch control with three settings +/- 8,16 & 24% * FAT, FAT32, NTFS formatted storage devices Dimensions: 19 x 9.96 x 1.75 (483 x 253 x 45 mm) Weight: 5.29 lbs (2.4 kg)

CDJ-210

CDX-1210

Professional Tabletop CD/MP3 Player
Audio CD, CD-R, MP3 compatible Extra Large jog wheel Anti-shock using RAM buffer memory Large blue backlit LCD display with text for MPSelectable Jog modes Scratch effect/Cue search/Pitch bend Instant reverse for added effect Brake mode for vinyl-like stops Instant-start & cue with preview Single & Continuous play modes Fully programmable with repeat function Seamless loop with reloop Pitch Bend via jog wheel or buttons +/- 16% Three mode time selection High speed rotary track search Frame accurate search Variable pitch control with three settings +/- 4, 8 & 16%
Professional 2U Single MP3/CD Player with Remote Control
Audio CD, CD-R, MP3 compatible Anti-shock using RAM buffer memory 1/8 (3.5mm) MP3 player input IR Remote control Auxiliary output volume control Large blue backlit LCD display with text for MP3s Instant reverse for added effect Brake mode for vinyl-like stops 3 Selectable Jog modes Scratch effect/Cue search/Pitch bend Instant-start & cue with preview Single & continuous play modes One seamless loop with reloop XLR balanced output High speed rotary track search Pitch bend via jog wheel or buttons +/- 16% Three mode time selection Frame accurate search Rubber jog wheel with finger grips Variable pitch control with three settings +/- 4, 8 & 16% Dimensions: 19 x 10 x 3.5 (482 x 255 x 89 mm) Weight: 5.5 lbs (2.5 kg)

Woofer Magnet LF Driver Crossover Freq. Point Connectors

Accessories

8 mm eye bolts3 pack Sold separately
Electronic Crossover Frequency 1.8 kHz Enclosure Finish Grille Handles Pole Mount Rigging Hardware Weight Dimensions (W x H x D) 18 mm (), MDF Black acrylic lacquer Metal Grille Ergonomic handles on top Diameter 35 mm M8 threaded bushing 16.5 kg / 36.4 lbs 350 x 650 x 360 mm; 13.8 x 24.2 x 14.2
Enclosure Finish Grille Handles Pole Mount Fitting Weight Dimensions (W x H x D)

EYE BOLTS (3)

1 meter pole - 35 mm diameter For pole mounting - sold separately
2 Ergonomic handles on side 2 Ergonomic handles on side

Eyebolts

POLE-1M

RS-408

8 Active Loudspeaker

RS-410

10 Active Bi-Amp Loudspeaker

RS-412

12 Active Bi-Amp Loudspeaker

RS-415

RS-308
15 Active Bi-Amp Loudspeaker

8 Passive Loudspeaker

RS-310

10 Passive Loudspeaker

RS-312

12 Passive Loudspeaker

RS-315

15 Passive Loudspeaker

POWERED SERIES Unit Dimensions (mm)
Active 8" 2-Way Loudspeaker, 120Wrms, 480W peak power
RS-x 270 x 500 mm 13.98 x 10.63 x 19.69 in 12.3 kg / 27.1 lbs 40 oz 3.5 kHz 1.35 PTC

Serial Number

RS-x 310 x 580 mm 16.54 x 12.20 x 22.83 in 17 kg / 37.5 lbs 12 2.oz 3.5 kHz 1.35 PTC 4 ohms
RS-x 400 x 685 mm 17.91 x 15.75 x 26.97 in 23.3 kg / 51.5 lbs 60 oz 3.5 kHz 1.75 PTC 4 ohms 245W + 55W 600W 1200W 40 Hz-18 kHz 245W + 55W
PASSIVE SERIES Unit Dimensions (mm) Unit Dimensions (in) Weight Woofer Size Woofer Coil Size Woofer Magnet Crossover Frequency Point Horn Driver HF Driver Protection Woofer Impedance Passive Power (RMS) Passive Power (Continuous) Passive Power (Peak) Frequency Response Sensitivity (1w@1m)
RS-x 270 x 500 mm 13.98 x 10.63 x 19.69 in 12.5 kg / 27.6 lbs 40 oz 4.5 kHz 1.35 PTC 4 ohms 160W 320W 640W 70 - 20 kHz 94 dB
RS-x 310 x 580 mm 16.54 x 12.20 x 22.83 in 14.5 kg / 32 lbs 12 2.oz 4 kHz 1.35 PTC 4 ohms 200W 400W 800W 45 - 20 kHz 95 dB
RS-x 400 x 685 mm 17.91 x 15.75 x 26.97 in 21.1 kg / 46.5 lbs 60 oz 3.5 kHz 1.75 PTC 4 ohms 300W 600W 1200W 45 - 18 kHz 96 dB
290 x 220 x 410 mm 11.42 x 8.66 x 16.14 in RS-408 8.1 kg / 17.9 lbs 8 1.oz 3.5 kHz 1 PTC 4 ohms 120W 240W 480W 70 Hz-18 kHz 120W

AC115V/230V 50-60Hz

290 x 220 x 410 mm 11.42 x 8.66 x 16.14 in 6.4 kg / 14.1 lbs 8 1.oz 5 kHz 1 PTC 4 ohms 120W 240W 480W 80 - 18 kHz 92 dB

Unit Dimensions (in)

2-Way Loudspeaker, , 480W peak power
Weight Woofer Size Woofer Coil Size

RS-SERIES

Real Smart Gemini unveils the RS line, a series of speakers that offer a cost-effective, great sounding choice for everyone from musicians to contractors to mobile DJs. Based on Geminis new advances in sound and style the RS models come in a variety of sizes to suit any application - 8, 10, 12, and 15, in either passive or active versions. Gemini speakers are noted for their wide dispersion capabilities, plus they are durable and easy to transport. Let Geminis RS models put the Real Sound out there, for you and your venue.
Back Panel of the RS-315 *Back panel appears the same throughout the RS 300 series
Woofer Magnet Crossover Frequency Point Horn Driver
HF Driver Protection Woofer Impedance
4 ohms 130W + 30W 320W 640W 60 Hz-18 kHz 130W + 30W
Passive Power (RMS) Passive Power (Continuous) Passive Power (Peak)
165W + 35W 400W 800W 45 Hz-18 kHz 165W + 35W

Frequency Response

Back Panel of the RS-415

Back Panel of the RS-408

Back Panel of the RS-410

Back Panel of the RS-412

Amplifier Power (RMS)
Rear view of XTR-500 Amplifier

Wheels Included

Two 5-meter (16.4 ft) Speakon Cables Included

GT-1004

10 Trapezoid Loudspeaker

GT-1204

12 Trapezoid Loudspeaker

GT-1504

GT SERIES GT-1004

15 Trapezoid Loudspeaker

GT-3004
GT-x 284 x 600 mm 15.87 x 11.18 x 23.62 in 10.3 kg / 22.7 lbs 12 1.oz 11 x 5 Double Piezo 8 ohms 100W 200W 400W 50 Hz - 20 kHz 94 dB GT-x 365 x 715 mm 19.02 x 14.37 x 28.15 in 16.4 kg / 36.1 lbs 40 oz 11 x 5 Double Piezo 8 ohms 175W 350W 700W 40 Hz - 20 kHz 95 dB
Dual 15 Trapezoid Loudspeaker

GSM-1260

12 Loudspeaker
GSM SERIES Unit Dimensions (mm) Unit Dimensions (in) Weight Woofer Size Woofer Coil Size Woofer Magnet Horn Size Tweeter Woofer Impedance Passive Power (RMS) Passive Power (Continuous) Passive Power (Peak) Frequency Response Sensitivity (1w@1m) GSM-x 303 x 593 mm 16.02 x 11.93 x 23.35 in 10.9 kg / 24 lbs 12 1.oz 4x x Piezo 3x ohms 90W 180W 360W 60 Hz - 20 kHz 94 dB

GSM-1585

15 Loudspeaker
*Speaker stands not included
GT-x 365 x 1075 mm 19.02 x 14.37 x 42.32 in 24.5 kg / 53.9 lbs 15 x 40 oz 11 x 5 Double Piezo 4 ohms 300W 600W 1200W 35 Hz - 20 kHz 97 dB
GSM-x 353 x 723 mm 18.86 x 13.90 x 28.46 in 17.6 kg / 38.7 lbs 40 oz 15 x x Piezo 3x ohms 100W 200W 400W 50 Hz - 20 kHz 94 dB
GSM-x 353 x 1103 mm 18.86 x 13.90 x 43.43 in 25.5 kg / 56.1 lbs 15 x 40 oz 15 x x Piezo 3x ohms 175W 350W 700W 40 Hz - 20 kHz 95 dB

GSM-3250

Dual 15 Loudspeaker

XTR-500

Complete Powered Speaker System
2 XTR-SAT 10 trapezoidal loudspeakers & 15 powered subwoofer Efficient MDF bandpass subwoofer enclosure with 35 mm standmount cap and wheels 3-channel power amplifier & active crossover built-in to subwoofer 230W RMS on subwoofer channel (subwoofer freq. response: 35 Hz to 100 Hz) 85 watts RMS per satellite channel (satellite freq. response: 100 Hz to 20 Hz) 400 watts total RMS and 800 watts peak power 120dB total continuous SPL Individual channel sensitivity/volume controls Balanced XLR and 1/4 inputs Speakon outputs for satellite channels (cables included) Variable speed fan and full protective metal grill Hard wearing black painted finish with rubber feet XTR-500SAT Dimensions: 25 x 11 x 20 (635 x 280 x 508 mm) XTR-500SAT Weight: 48.4 lbs (21.95 kg) XTR-500SUB Dimensions: 23 x 26.5 x 21 (584 x 673 x 533 mm) XTR-500SUB Weight: 93.5 lbs (42.41 kg)

GT & GSM SERIES

The Gemini GT- and GSM-series are affordable and durable passive speakers. The GT series are in trapezoidal housings, while the GSM models are in rectangular housings. Pair any of the Gemini GT- (2-way) or GSM- (3-way) model PA speakers with any Gemini amp to create your own affordable PA package. These speakers provide great and high power handling without breaking the bank. With banana connectors (GT), push-button connectors (GSM) as well as dual input jacks (GT & GSM) for easy connection, they are cost-effective PA speakers in a sturdy wood cabinet, great for any DJ or live sound application.
Unit Dimensions (mm) Unit Dimensions (in) Weight Woofer Size Woofer Coil Size Woofer Magnet Horn Size Horn Driver Woofer Impedance Passive Power (RMS) Passive Power (Continuous) Passive Power (Peak) Frequency Response Sensitivity (1w@1m)
318 x 232 x 465 mm 12.52 x 9.13 x 18.31 in 7.1 kg / 15.6 lbs 10 1.oz 6x 3 Double Piezo 8 ohms 90W 180W 360W 60 Hz - 20 kHz 94 dB

Back Panel of the GT-1504 *Back panel appears the same throughout the GT series
Back Panel of the GSM-1585 *Back panel appears the same throughout the GSM series

AMPLIFIERS

XGA SERIES
Professional Power Amplifier

XP SERIES

Rear panel of XGA Series *XGA-5000 Shown
XGA-5000 Output Stereo 8 Output Stereo 4 Output Bridged 8 Momentary Peak Output Signal to Noise (20Hz~20kHz) Input Impedance Frequency Response THD 20Hz~20kHz Input Sensitivity Maximum Input Level Damping Factor (F=1kHz 8) Cooling Slew Rate Indicators (LED) Protection Power Supply Dimensions Weight 26.82 lbs (12.1 kg) 2 x 400W RMS 2 x 550W RMS 1100W RMS 5000 W >100dB
XGA-x 250W RMS 2 x 350W RMS 700W RMS 4000 W 20k
XGA-x 150W RMS 2 x 200W RMS 400W RMS 3000 W >95dB
XGA-x 90W RMS 2 x 125W RMS 250W RMS 2000 W >90dB
Rear panel of XP Series *XP-6000 Shown
XP-6000 Output Stereo 8 Output Stereo 4 Output Stereo 2 Output Bridged 8 Output Bridged 4 Signal to Noise (20Hz~20kHz) Input Impedance Frequency Response THD 20Hz~20kHz Input Sensitivity Maximum Input Level Damping Factor (F=1kHz 8) Cooling Slew Rate Indicators (LED) Protection Power Supply Dimensions Weight 33.71 lbs (15.2 kg) 2 x 600W RMS 2 x 1000W RMS 2 x 1350W RMS 2000W RMS 3000W RMS >100dB 20k 10Hz~50kHz 1.5dB 0.05% 0.77v 21dBv/9v >500 Variable Speed Fan 60v/uS
XP-x 350W RMS 2 x 550W RMS 2 x 750W RMS 1100W RMS 1500W RMS >90dB
Reliable Performance. True Power.
The XGA series power amps come in four models with different wattage: XGA-5000, XGA-4000, XGA-3000, and XGA-2000. Each amp comes designed to deliver maximum wattage and power to any speaker. Each XGA amp is durable and lightweight, and offers unmatched value in their class. With their powerful reliable performance, the XGA series amps easily handle any amount of usage and can deliver deep, pulsating lows that rattle your insides. Each amp also comes with a variable-speed cooling fan. Their extreme reliability, clean sound, and durability make them the professionals choice when it comes to sound.
10Hz~50kHz 1.5dB 0.1% 0.77v 21dBv/9v >350 Variable Speed Fan 45v/uS Power (Blue), Protect (Yellow), Clip (Red), and Bridge (Green) AC Line Fuse, Thermal Cut Off, Power Up/Down Transients, Slow Start AC 115v/230v 50~60Hz 19 x 13.8 x 3.5 (482 x 350 x 88 mm) 23.42 lbs (10.62 kg) 19.04 lbs (8.6 kg) 17.68 lbs (8 kg) 40v/uS
Maximum Power, Highest Quality, Superb Reliability.
The XP series power amps are professionally designed and built for mobile DJ/PA use and custom sound installation. Both the XP-6000 and XP-3000 are stable at 2 ohms. The XP Series are rugged, lightweight, and offer unmatched value in their class, designed with superior sound quality first. Only the best components go into these power amps to provide tight low-end, full and rich high-end, and pleasing mid-range. The XP Series power amps are especially designed for professionals who value high power, audio clarity, and lasting performance.

Power (Blue), Protect (Yellow), Clip (Red), and Bridge (Green) AC Line Fuse, Thermal Cut Off, Power Up/Down Transients, Slow Start AC 115v/230v 50~60Hz 19 x 15.7 x 3.5 (482 x 400 x 88 mm) 31.76 lbs (14.4 kg)

MIXERS

*iPods Not Included

MM-1000

19 Professional 3-Channel Stereo Mixer

MM-3000

19 Professional 5-Channel Stereo Mixer

MM-4000

19 Professional 4-Channel Mixer with Effects

MM-1800

19 Professional 4-Channel Stereo Mixer

MM-2400

ITRAX-BLK

iPod Mixer Console*

Mixer Series MM-(Stereo) 3 Balanced Master (XLR), Master (RCA), Zone (RCA), Record (RCA) Push-Button Cueing w/ Cue/PGM Fader Assignable, Rail Glide Dual 10-Band Graphic EQ N/A MM-(Stereo) 3 Balanced Master (XLR), Master (RCA), Zone (RCA), Record (RCA) Push-Button Cueing w/ Cue/PGM Fader Assignable, Rail Glide Dual 10-Band Graphic EQ Echo effect with adjustable repeat and delay; 6 preset SoundFX including scratch, applause, and scream 5U
Dual docking stations for iPod digital music players USB port with dock switch allows library management via PC 2 Phono / Line convertible inputs for use with additional devices 3-Band rotary EQ gain and cut feature per channel (6.35 mm) mic input with 2-band EQ controls Master and record RCA outputs Input selection switches Cue section with CH1/CH2 cue fader Lightweight, slimline design for complete portability Dimensions: 11 x 10 x 3 (279 x 254 x 76 mm) Weight: 5.2 lbs (2.36 kg)

MIXER SERIES

The Gemini MM- Mixer series offers exceptional value to karaoke, mobile, and club DJs. In addition to the generous line and mic inputs, youll find powerful tone controls including graphic or rotary EQs and gain control. The MM-series also offers mixers with built-in DSP effects. All MM- series mixers come with the user-replaceable RailGlide cross faders, and a variety of outputs for the total package to satisfy all your mixing needs.
Mixer Series Channels Line Inputs Phono Inputs Mic Inputs Outputs
MM-(Stereo) 1 Master (RCA), Record (RCA)
MM-(Stereo) 3 Balanced Master (XLR), Master (RCA), Zone (RCA), Record (RCA) Push-Button Cueing w/ Cue/PGM Fader Assignable, Rail Glide 3-Band Rotary per Channel
MM-(Stereo) 5 Balanced Master (XLR), Master (RCA), Zone (RCA), Record (RCA) Push-Button Cueing w/ Cue/PGM Fader Assignable, Rail Glide 3-Band Rotary per Channel 8 effect DSP Module w/16 Presets 4U
Channels Line Inputs Phono Inputs Mic Inputs Outputs
The GEMINI MM mixers are specifically designed for club installations, but have a broad range of other potential uses. They have a variety of inputs & outputs, user-replaceable Rail Glide Crossfaders, and a range of features (cueing, effects, USB, etc.) that enable you to get all the power and flexibility you need without overpaying. Geminis long-respected name means reliability and great value!

Cue/Program Crossfader EQ Effects
Cue/Program Crossfader EQ
Cue/Program Rotary Rail Glide 5-Band Graphic EQ

Mixer Applications:

-Rugged design for live sound reinforcement. -19 rackmounting perfect for club Installations. -Simple, intuitive controls for public speaking venues. -Versatile mixing options for presentations. -Set and forget for easy operation at houses of worship.
Effects N/A N/A Rack Size 4U 4U

Rack Size

PS-121x
6.5 2-Channel Stereo Mixer

PS-424x

PS-626x
10 2-Channel Stereo Mixer
10 3-Channel Stereo Mixer

PS-626USB

10 3-Channel Mixer with USB
PS Mixer Series Size PS-626USB (Stereo) 1 Master (RCA), Record (RCA), USB Rotary CUE/PGM Fader w/ Selector Rail Glide PS-626EFX (Stereo) 1 Master (RCA), Record (RCA) Rotary CUE/PGM Fader w/ Selector Rail Glide

PS-626EFX

PS-828EFX 12.(Stereo) 1 Balanced Stereo Master (XLR), Master (RCA), Record (RCA) Individual Channel w/ CUE/PGM Fader Assignable, Rail Glide 3-Band Rotary per Channel One touch effects control w/ adjustment EFX parameter including: Filter, Flanger, and Phaser

PS-828EFX

10 3-Channel Mixer with Effects
12.5 4-Channel Stereo Mixer with Effects

PS MIXER SERIES

Geminis original PS series mixer was our most popular mixer ever, winning scores of awards for Best DJ Mixer and Best DJ Product and introducing a rock-solid and reliable, yet affordable mixer for up-and-coming DJs around the world. Now the PS series is back, freshly updated and ergonomically re-designed for the modern age. Featuring Geminis unparalleled Rail Glide crossfader, an iPod friendly cable for mixing digital music files, plus all the popular features of the celebrated PS series mixer that youve come to love and expect.
PS Mixer Series Size Channels Line Inputs Phono Inputs Mic Inputs Outputs Cue/Program Crossfader EQ Effects
PS-121X 6.(Stereo) 1 Master (RCA) Rotary Cue Fixed 2-Channel
PS-424X (Stereo) 1 Master (RCA), Record (RCA) Rotary CUE/PGM Fader w/ Selector Rail Glide

PS-626X (Stereo) 1 Master (RCA), Record (RCA) Rotary CUE/PGM Fader w/ Selector Rail Glide 3-Band Rotary per Channel N/A
The GEMINI PS mixers are specifically designed for scratch DJs who need a compact, portable system that they can set up and break down easily and quickly. Add a set of GEMINI powered speakers, plug in your sound source, and youre all set! With mixing, cueing, and cross-fading capabilities, multiple sizes to fit any rig (6.5, 10, & 12.5), a full range of inputs and outputs, and even effects (on the higher end units), you can rock the house without breaking your back. or the bank.

PS Mixer Applications:

-Legendary choice for installed DJ rigs. -Durable and rugged to satisfy the most demanding mobile DJ. -Great choice as a summing/line mixer for multiple instrument setups. -Accommodating for progressive laptop setups. -Compact and useful for monitoring and foldback applications.
3-Band Rotary per Channel 3-Band Rotary per Channel N/A One touch effects control w/ adjustment EFX parameter including: Filter, Flanger, and Phaser
2-Band Rotary per Channel 3-Band Rotary per Channel N/A N/A

TURNTABLES

GEMINI Turntables are built on a robust ABS base and enclosure, with heavy adjustable rubber feet to completely eliminate external vibration feedback. They have aluminum platters and precision aluminum tone arms, for road ready durability and superior tracking and skip resistance under the most strenuous conditions. They also come standard with detachable RCA and ground cables. With attractive design, and heavy-duty motor and tone arm, GEMINI Turntables provide a great mix of form and functionality.

TT-1100USB

Belt Drive USB Turntable
Fully manual belt drive turntable Battle and club style design +/-10% Variable pitch slider Solid aluminum platter USB computer connectivity for PC and Mac Audacity recording software included Line level RCA outputs (with builtin preamp) Fully adjustable counter weight & anti-skating controls 33, 45 and 78 RPM, reverse playback capability Dual soft touch start/stop buttons Motor off button for slower braking Removable target light (not included) Included: HD-15 headshell, CN-15, 45 adapter, felt slipmat, detachable RCA & ground cables, and USB cable Dimensions: 17.67 x 14.56 x 5.7 (449 x 370 x 145 mm) Weight: 8.1 lbs (4 kg)

TT-1000

Belt Drive Turntable
Fully manual belt drive turntable Battle and club style design +/-10% variable pitch slider Solid aluminum platter Fully adjustable counter weight & anti-skating controls 33, 45 and 78 RPM, reverse playback capability Dual soft touch start/stop buttons Motor off button for slower braking Removable target light (not included) Included: HD-15 headshell, CN-15 cartridge, 45 adapter, felt slipmat, detachable RCA, and ground cables Dimensions: 17.67 x 14.56 x 5.7 (449 x 370 x 145 mm) Weight: 8.1 lbs (4 kg)

USB Turntable

In addition to giving you a belt-drive turntable, The TT-1100USB offers you the ability to connect it to a USB port on a PC or Mac, allowing users to transfer their vinyl collections into digital formats at 44.1 kHz sampling rate and 16-bit depth! The TT-1100USB is the tool of choice to bridge vinyl and digital collections!

TT-2000

Direct Drive Turntable
High torque direct drive turntable Battle and club style design +/-10% variable pitch slider Solid aluminum platter Fully adjustable counter weight & anti-skating controls 33 and 45 RPM, reverse playback capability Dual soft touch start/stop buttons Motor Off button for slower braking Removable target light (not included) Included: HD-15 headshell, CN-15 cartridge, 45 adapter, felt slipmat, detachable RCA & ground cables Dimensions: 17.67 x 14.56 x 5.7 (449 x 370 x 145 mm) Weight: 10 lbs (4.5 kg)

Turntable Accessories

Headshell
Sturdy silver body with tracking arm Rubber washer for snug fit to tone arm

STYLUS-15

Replacement Stylus
Replacement stylus for CN-15

Cartridge with Stylus

Elliptical stylus for strong tracking Stylus cover for extended life span Screws to connect to HD-15 included

HDCN-15

Headshell with CN-15 mounted
Sturdy silver body with tracking arm Rubber washer for snug fit to tone arm Elliptical stylus for strong tracking Stylus cover for extended life span

Target Light

Sturdy aluminum body Convenient RCA connection for easy replacement Bright white LED for tracking

WIRELESS

WIRELESS SYSTEMS
The Gemini wireless systems provide freedom for you to roam and mix with the crowd while ensuring you are heard above it all. These systems offer a blend of affordability and high performance features for DJs, musicians, vocalists, public speakers, and presentation venues, so that what you have to say or sing wont get lost. The systems have a wide range (UF 400 feet, UHF 250 feet, and VHF 100 feet).

UHF-116

16 Channel Wireless UHF PLL System
Choice of the following: UHF-116 M: UHF-16HHM unidirectional, handheld dynamic microphone UHF-116 HL: HSL-08 convertible, lightweight headset/lavaliere mic with sensitivity and pop control; UHF-16BP belt pack transmitter Dimensions: 9.24 x 5 x 1.5 (234.9 x 127 x 38.1 mm) Weight:.68 lbs (.3 kg)

UF-1264

Professional 64 Channel UHF PLL Diversity Wireless System
Choice of the following: UF-1264 M: FM-64 handheld unidirectional dynamic microphone with rechargeable battery UF-1264 HL: FB-64T belt pack transmitter with mic/switch, HSL-20 electret condenser headset/lavaliere combo mic with mini XLR and rechargeable battery UF-1264 diversity receiver Range: up to 400 Frequency Range - USA: 682 - 697 MHz / Europe: 854 - 865 MHz Dimensions: 8.75 x 6.5 x 1.50 (222 x 165 x 38 mm) Weight: 5.02 lbs (2.28 kg)

UF-2064

UHF-216

FB-64T FM-64 HSL-20*

Professional 64 Channel UHF PLL Dual Wireless System
Choice of the following: UF-2064 M: FM-64 handheld unidirectional dynamic microphone with rechargeable battery UF-2064 HL: FB-64T belt pack transmitter with mic/switch, HSL-20 electret condenser headset/lavaliere combo mic with mini XLR and rechargeable battery Range: up to 250 per channel Frequency Range - USA: 682-697 MHz / Europe: 854-865 MHz Dimensions: 8.25 x 6.5 x 1.75 (210 x 165 x 44 mm) Weight: 5.18 lbs (2.35 kg) Additional features for the UF-1264 and UF-2064: Balanced & unbalanced outputs 64 band UHF synthesizer controlled frequencies Phase locked loop (PLL) circuitry Super high sensitivity with extremely low noise transmission & reception Stable & quality SMT assembled PCB module Power & 2 RF LEDs Squelch control Up to 20-25 hours battery life using alkaline batteries Metal adaptor included for 19 rack mounting 2 units can be mounted side by side in a 19 rack Individual mic outputs & 1 single summed output (UF-2064 only)
Dual 16 Channel Wireless UHF PLL System
Choice of the following: UHF-216 M: (2) UHF-16HHM unidirectional, handheld dynamic microphone UHF-216 HL: (2) HSL-08 convertible, lightweight headset/lavaliere mic with sensitivity and pop control; (2) UHF-16BP belt pack transmitter Additional features for the UHF-116 and UHF-216: High quality (dual channel) UHF receivers with 250 range US: 16 operating frequencies per channel between 682 MHz and 697 MHz EUR: 16 operating frequencies per channel between 854 MHz and 864 MHz Phase Locked Loop (PLL) circuitry for increased reception RF and AF LED indicators for monitoring incoming signal strength Auto mute with squelch control and built-in noise reduction Front panel output level controls Standard (1/4 6.3mm jack) outputs Low battery LED indicators Microphone On/Off switches

*Single combined lavaliere / headset unit

UHF-16HHM

HSL-08*

UHF-16BP

The Gemini UF series Wireless System are fully switchable UHF receivers with 64 bands of UHF signals with separate transmitter varieties. Made with advanced technology & a variety of easy to use features, these are vocal interfaces are suitable from professional singers to musicians.
Dimensions: 9.24 x 5 x 1.5 (234.9 x 127 x 38.1 mm) Weight:.68 lbs (.3 kg)
16 selectable frequencies between 682-697 MHz (US) and 854-865 MHz (EUR)

OUTBOARDS

Geminis outboards give DJs and clubs the ultimate

VHF-1001

control over their live sound. They provide flexible input and output connections, giving you flexible routing to accommodate any setup.
Single Channel Wireless System
Choice of the following: VHF-1001 M: VHF-04HHM unidirectional, handheld dynamic microphone VHF-1001 HL: HSL-08 convertible, lightweight headset/lavalier mic with sensitivity and pop control; VHF-04BP belt pack transmitter Dimensions: 9.24 x 5 x 1.5 (234.9 x 127 x 38.1 mm) Weight:.68 lbs (.3 kg)

CX-1000

Electronic Crossover
Stereo 3-way / 2-way electronic crossover Low, mid-low, mid-high, high pass selectors Low, mid, high output level controls Dimensions: 19 x 10 x 1.75 (483 x 254 x 45 mm) Weight: 7.18 lbs (3.26 kg)

EQ-3000

Dual 15 Band Equalizer

VHF-2001

Dual Channel Wireless System
Choice of the following: VHF-2001 M: (2) VHF-04HHM unidirectional, handheld dynamic VHF-2001 HL: (2) HSL-08 convertible, lightweight headset/lavalier mic with sensitivity and pop control; (2) VHF-04BP belt pack transmitter Additional features for the VHF-1001 and VHF-2001: High quality dual channel VHF receiver with 100 range 4 different channels that are matched to 4 different frequencies Power and channel LED indicators Front panel output level control Auto mute and built in noise reduction ON/ OFF power switch Standard 1/4 (6.35mm jack) output Dimensions: 9.24 x 5 x 1.5 (234.9 x 127 x 38.1 mm) Weight:.68 lbs (.3 kg)
12dB boost / cut balanced / RCA unbalanced inputs & outputs Low cut feature Dimensions: 19 x 10.5 x 1.75 (483 x 267 x 45 mm) Weight: 7.54 lbs (3.42 kg)
ALL MODELS ARE AVAILABLE IN EIGHT DIFFERENT FREQUENCIES: Frequency Conversion Chart:
VHF-04HHM HSL-08* VHF-04BP

PA-7000

Preamplifier
Preamplifier with volume control, 3 band equalizer 4 inputs + mic input with level control Mute, low cut and loudness feature Stereo RCA inputs, XLR outputs Dimensions: 19 x 10.5 x 1.75 (483 x 267 x 45 mm) Weight: 7 lbs (3.18 kg)

Channel

US/EUR Frequency 177.60 MHz 186.60 MHz 198.60 MHz 204.60 MHz
UK Frequency 173. 8 MHz 174.1 MHz 174.5 MHz 175.0 MHz
*Single combined lavalier / headset unit

PORTABLE PA

PORTABLE PA SERIES
This portable sound system can go anywhere great sound is needed. Accommodating a wide variety of applications from mic input, musical instrument output from a CD or cassette player, or iPod played through the built-in dock, the MS-POD is ready for anything from speeches to small gigs to backyard parties. Its lightweight, has built-in casters and a telescoping handle to make transport convenient, and runs on rechargeable battery or AC.
The MS-USB from Gemini allows you the ability to play any music or recorded material from USB sticks or SD cards directly through its amplified speaker system, in addition to having inputs for mics and other sources as well. The large LCD screen enables easy viewing and selection of titles from your media, and the full-featured controller section includes Folder/Track Search knob, Single/Repeat Play, Cue, Reloop, and Pitch Bend Sliders and Buttons. The retractable handle, builtin wheels, and battery/AC operation make the MS-USB easy to take along anywhere you need powerful, flexible, great-sounding audio.

MS-POD

MS-USB
Portable PA/Sound System with USB Flash Drive and SD Card Inputs
Powered mountable 2-way speaker system for any portable application Built-in rechargeable battery with level indicator lasts over 12 hours Three inputs: 1 Balanced, 1 Instrument/Mic, 1 Aux (Stereo RCA) Inputs for USB key drive or device, and SD card LCD for easy location of USB and SD card files Master Volume/Individual Gain Control for Input 1 & 2 Outputs high-fidelity sound to over 150 feet Enhanced bass output creates a full, rich sound Professional quality microphone included Heavy-duty aluminum construction Two-wheel system with retractable handle for easy portability Dual Voltage with Selector Switch Link Output Jack 35mm base for stand mounting
Portable Sound System for
Powered mountable 2-way speaker system for any portable sound application Built-in rechargeable battery with level indicator lasts over 12 hours Three inputs: 1 Balanced, 1 Instrument/Mic, 1 Aux (Stereo RCA) Integrated universal iPod dock Master Volume/Individual Gain Control for Input 1 & 2 Outputs high-fidelity sound to over 150 feet Enhanced bass output creates a full, rich sound Professional quality microphone included Heavy-duty aluminum construction Two-wheel system with retractable handle for easy portability Dual Voltage with Selector Switch Link Output Jack 35mm base for stand mounting Dimensions: 16.3 x 12.87 x 19.69 (425 x 327 x 500 mm) Weight: 28.16 lbs. (12.77 kg)