FEATURES:

m, H, & L
PRofessional UHF wireless system
The UX-16 is a compact lightweight 16 band switchable UHF wireless microphone receiver, available in three types of packages: Microphone, Headset & Lavalier. With professional features, the UX series transmitters & receivers are simple to use, making them the perfect addition for any DJs first or second wireless microphone experience.
UX-16 is available with XM-16 handheld microphone or XB-16 belt pack transmitter with HSM-2 or LAV-1 microphones 16 band UHF synthesizer controlled frequencies with easy to use four-way dip switches Phase locked loop (PLL) circuitry Super high sensitivity with extremely low noise transmission & reception Stable & quality SMT assembled PCB module Convenient squelch control XM-16 has a uni-directional dynamic microphone XB-16 is equipped with a mic/line switch for instruments etc. HSM-2 & LAV-1 have an electret condenser unit microphones
LAV-i lavalier has a condenser microphone
XB-i6 transmitter with screw-in 1/8 mini plug
Contact your local sales rep for pricing and stock enquires. Model Number: UX-16 M, UX-16 H, UX-16 L Gemini Worldwide Headquarters 120 Clover Place, Edison, NJ 08837 USA Tel: (732) 738-9003 Fax: (732) 738-9006 E-mail: sales-usa@geminidj.com Web: www.geminidj.com Gemini Sound Products Corp. 2004 All Rights Reserved.

xm-I6 dynamic MICROPHONE

hsm-2 headset with a condenser microphone
easy to change channels with 4 dip switches

OPERATIONS MANUAL

BEDIENUNGSHANDBUCH MANUAL DEL OPERADOR MANUEL DINSTRUCTIONS

M, H, & L

PRO WIRELESS UHF MICROPHONE SYSTEM
PROFESSIONAL UHF MICROPHONE SYSTEMS
PROFESSIONELLE UHF MIKROPHON SYSTEME SISTEMAS DE FRECUENCIA UHF PROFESIONALES DEL MICRFONO SYSTMES FRQUENCE UHF PROFESSIONNELS DE MICROPHONE
MULTI LANGUAGE INSTRUCTIONS:
English....Page 2 Deutsch....Page 6 Espaol....Page 8 Francais....Page 10
PLEASE READ BEFORE USING APPLIANCE, IMPORTANT WARNING & SAFETY INSTRUCTIONS! CAUTION
RISK OF ELECTRICAL SHOCK DO NOT OPEN!
CAUTION: THIS PRODUCT SATISFIES FCC REGULATIONS WHEN SHIELDED CABLES AND CONNECTORS ARE USED TO CONNECT THE UNIT TO OTHER EQUIPMENT. TO PREVENT ELECTROMAGNETIC INTERFERENCE WITH ELECTRIC APPLIANCES SUCH AS RADIOS AND TELEVISIONS, USE SHIELDED CABLES AND CONNECTORS FOR CONNECTIONS. THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED DANGEROUS VOLTAGE WITHIN THE PRODUCTS ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.
POWER-CORD PROTECTION: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the product. OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. See Figure B. LIGHTNING: For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY: Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. SERVICING: Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. DAMAGE REQUIRING SERVICE: Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: When the power-supply cord or plug is damaged. If liquid has been spilled, or objects have fallen into the product. If the product has been exposed to rain or water. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. If the product has been dropped or damaged in any way. When the product exhibits a distinct change in performance, this indicates a need for service. REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards. SAFETY CHECK: Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. WALL OR CEILING MOUNTING: The product should not be mounted to a wall or ceiling. HEAT: The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

READ INSTRUCTIONS: All the safety and operating instructions should be read before the product is operated. RETAIN INSTRUCTIONS: The safety and operating instructions should be retained for future reference. HEED WARNINGS: All warnings on the product and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS: All operating and use instructions should be followed. CLEANING: The product should be cleaned only with a polishing cloth or a soft dry cloth. Never clean with furniture wax, benzine, insecticides or other volatile liquids since they may corrode the cabinet. ATTACHMENTS: Do not use attachments not recommended by the product manufacturer as they may cause hazards. WATER AND MOISTURE: Do not use this product near water, for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool; and the like. ACCESSORIES: Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. CART: A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. See Figure A. VENTILATION: Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. POWER SOURCES: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. LOCATION: The appliance should be installed in a stable location. NON-USE PERIODS: The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. GROUNDING OR POLARIZATION: If this product is equipped with a polarized alternating current line plug (a plug having one blade wider than the other), it will fit into the outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If this product is equipped with a three-wire grounding type plug, a plug having a third (grounding) pin, it will only fit into a grounding type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding type plug.

UX-16 RECIEVER

XM-16 HANDHELD MICROPHONE
XB-16 BODYPACK TRANSMITTER

INTRODUCTION:

Congratulations on your purchase of a GEMINI wireless system. This state of the art unit includes all the latest features backed by a three year limited warranty. Prior to use, we suggest that you carefully read the instructions.
(4) ANTENNA: Fixed-length UHF antenna permanently mounted either on the front or on rear panel. (5) UNBALANCED OUTPUT: Unbalanced 1/4 mono jack audio output provides unbalanced low-impedance output (6) SQUELCH ADJ.: The squelch adjusts the output level to prevent from the external noise. Setting the squelch too high will reduce the range of the system. Set the squelch to minimum before turning the receiver on. (7) CHANNEL SELECTOR: 16 different selectable frequencies as below.

SYSTEM FEATURES:

UX-16 M includes UX-16 receiver & XM-16 handheld microphone UX-16 H includes UX-16 receiver, XB-16 body pack transmitter & HSM-1 headset UX-16 L includes UX-16 Receiver, XB-16 body pack transmitter & LAV-1 lavalier 16 band UHF synthesizer controlled frequencies Phase locked loop (PLL) circuitry Super high sensitivity with extremely low noise transmission & reception Stable & quality SMT assembled PCB module XM-16 has a uni-directional dynamic microphone HSM-1 has an electret condenser unit microphone LAV-1 has an electret condenser unit microphone

CAUTIONS:

1. All operating instructions should be read before using this equipment. 2. To reduce the risk of electrical shock, do not open the unit. THERE ARE NO USER REPLACEABLE PARTS INSIDE. Please refer servicing to a qualified service technician. (8) DC JACK: DC input connector for the supplied AC adapter. 3. Do not expose this unit to direct sunlight or to a heat source such as a radiator or stove. 4. Dust, dirt and debris can interfere with the performance of this unit. Make an effort to keep the unit away from dusty, dirty environments, and cover the unit when it is not in use. Dust it regularly with a soft, clean brush. 5. When moving this equipment, it should be placed in its original carton and packaging. This will reduce the risk of damage during transit. 6. DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. 7. DO NOT USE ANY SPRAY CLEANER OR LUBRICANT ON ANY CONTROLS OR SWITCHES. 8. REMEMBER, ANY CHANGES MADE TO THE UNIT WITHOUT AUTHORIZATION FROM GEMINI WILL VOID YOUR WARRANTY.
XM-16 HANDHELD MICROPHONE:
The handheld microphone operates in UHF band frequency with PLL synthesized control. UHF 16 preprogrammed selectable frequencies to avoid interference. Uni-directional dynamic or uni-directional electret condenser capsules with different characters for various choices. Use 1.5V x 2 AA size batteries for low operating cost. (1) GRILLE: Protects the microphone capsule and helps reduce breath sounds and wind noise. The grille for the various microphone capsules differ in appearance. (2) LOW BATTERY LED: LED indicates battery status. Switching the power to ON, the LED flashing once indicates that the transmitter has sufficient power. If the LED stays on, it indicates that the battery has insufficient power and should be changed soon. If the status LED fails to flash, the battery is either dead or not positioned correctly, and you should correct the positioning or change the battery. (3) ON/OFF SWITCH: Turns transmitter power on and off. (4) BATTERY COMPARTMENT: Insert two AA batteries into the compartment and make sure that the polarity of batteries is correct. (5) CHANNEL SELECTOR: Changes transmitter channel setting. (6) BATTERY COVER: Push to expose battery compartment and channel selector.

FCC RULES AND REGULATIONS:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undesired operation Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Important note, to comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void users authority to operate the device.
(7) ANTENNA: Built-in high gain helical antenna.
XB-16 BODYPACK TRANSMITTER:
The bodypack transmitter operates in UHF band frequency with PLL synthesized control. UHF 16 preprogrammed selectable frequencies to avoid interference. Various uni-directional electret condenser capsule options. Use 1.5V x 2 AA size batteries for low operating cost. (1) CONNECTOR: 1/8 miniplug microphone connector (2) ON/OFF SWITCH: Turns transmitter power on and off. (3) LOW BATTERY LED: LED indicates battery status. Switching the power to ON, the LED flashing once indicates that the transmitter has sufficient power. If the LED stays on, it indicates that the battery has insufficient power and should be changed soon. If the status LED fails to flash, the battery is either dead or not positioned correctly, and you should correct the positioning or change the battery. (4) ANTENNA: Permanently connected, helical antenna. (5) CHANNEL SELECTOR: Changes transmitter channel setting. (6) GAIN: The rotary control adjusts the sensitivity of the transmitters audio to the level of the connected lapel microphone or instrument. (7) BATTERY COMPARTMENT: Insert two AA batteries into the compartment and make sure that the polarity of batteries is correct.

UX-16 WIRELESS SYSTEM:

The UX-16 wireless system is a high quality audio product that provides excellent performance under most operating conditions. The different systems available all operate on a UHF high band frequency between USA: 790-806 MHz / Europe: 863-865 MHz.

WIRELESS NOTES:

Before setting up, make sure that the transmitter and receiver are tuned to the same frequency. Do not use two transmitters in the same frequency. Use good quality batteries to avoid the damage resulting from a defective leaking battery. Turn the volume control on the receiver to adjust receiver output level to match input level requirements of an audio mixer or amplifier. While checking sound, move the transmitter around the area where you use the system to look for dead spots. If you find any dead spot, change the receiver position. If it does not work, avoid such places. To avoid interference, do not put the receiver too near metal object and avoid obstructions between transmitter and receiver. Avoid the interference from TV, radio, other wireless appliances and etc.

FUNCTION DESCRIPTIONS:

UX-16 RECEIVER:
This is a stationary receiver for use with our 16-channel selectable transmitters. The receiver operates in UHF band frequency with PLL synthesized control. Powered by 12V DC. (1) POWER INDICATOR: The indicator LED lights when the receiver is ready to operate. (2)RF LEVEL INDICATORS: This LED lights to indicate that signal is being received. (3) LEVEL CONTROL: This rotary control adjusts the receivers output level from the microphone to line level for matching the input sensitivity of the mixer or amplifier.

SETTING UP:

Prior to setting up, check that the transmitter and receiver are tuned to the same frequency. Two or above transmitters operating in the same frequency can not be used at the same time and area, so please select the different frequencies which can be used simultaneously at local area.

BASIC CONNECTIONS:

Connect the receiver output to the audio mixer or amplifier input, using a standard audio cable with the 1/4 phone plugs.

CONNECTING AN INSTRUMENT

Open the battery cover. Push the MIC/LINE switch to LINE and use the supplied screwdriver to adjust the GAIN at appropriate position. Plug the 1/4 phone plug of the optional guitar cable to the output jack on the instrument and the 1/8 mini plug into audio input connector on the bodypack transmitter. Switch the transmitter and hi-fi appliance (amplifier, tape deck etc.) power on. Play the instrument for testing and adjust the levels on your mixer or amplifier.

TROUBLE-SHOOTING:

NO SOUND:
Check the power supply of the microphone and receiver. Check that the transmitter and receiver are tuned to the same frequency. Check whether the hi-fi appliance is switched on and the receiver output is connected to mixer or amplifier input. Check whether transmitter is too far away from receiver or SQUELCH control set too high. Check whether receiver is located too near metal object or there are obstructions between transmitter and receiver.
CONNECTING THE RECEIVER TO POWER:
Point the antennas upward. Check that the voltage of the supplied AC adapter (AC110 or AC220) conforms to the voltage available in local area. Using the wrong AC adapter may cause irreparable damage to the unit. Plug the feeder cable of the supplied AC adapter into DC IN socket on the receiver. Then plug the AC adapter into a power outlet.

SOUND INTERFERENCE:

Check the antenna location. When using 2 or above microphone sets simultaneously, make sure that the chosen frequencies are not interfered. Check whether the interference comes from other wireless microphones, TV, radio and etc.

DISTORTION:

Check the volume level of the receiver is set too high or too low. Check whether the interference comes from other wireless microphones, TV, radio and etc.
CONNECTING THE RECEIVER TO AN AUDIO MIXER OR AN AMPLIFIER:
In order to make sure the sound quality and avoid distortion, please adjust the volume level according to following instructions.

SPECIFICATIONS:

UX-16: Frequency range...USA: 790 806MHz/Europe: 863 865MHz Case.....Mini case Receiving System....PLL synthesized Receiving Mode....16CH, Single Channel, Non-diversity Frequency Stability....+/- 0.05% Receiving Sensitivity...At 8 dBuV over 80dB S/N ratio Image & Spurious Rej....80 dB minimum Selectivity.....> 50dB Modulation Mode.....FM IF Frequency...1st: 56MHz 2nd: 10.7MHz Dynamic Range.....>96dB Tone Signal.....32.768KHz S/N Response...Over 94dB, at 48KHz deviation and 60dBuV antenna input AF Response....50Hz to 15KHz(+/-3dB) T.H.D....<1%(at 1KHz) Power Supply....DC 12 ~ 18V Audio Output...Balanced & unbalanced output Current Consumption....130mA +/- 10mA Dimension(mm)WxHxD....130 x 36 x 92 XM-16: Mic Type....16CH, Handheld microphone Frequency range...USA: 790 806MHz/Europe: 863 865MHz RF Power Output.....10mW(max.) Oscillation Mode...PLL synthesized Frequency Stability.....+/- 0.005% Maximum Deviation...+/-48KHz with limiting compressor Spurious Emission....>60 dB below carrier frequency T.H.D....<1%(at 1KHz) Battery...DC 3V(1.5v x 2 AA size batteries) Tone Key.....32.768KHz Mic Unit....Uni-directional dynamic unit LED Indicator....Power ON-OFF and low battery Current Consumption....65 +/- 5mA Dimension(mm)WxH....272 x 62 XB-16 Mic Type....16CH, Bodypack transmitter Frequency range..USA: 790-806MHz/Europe: 863 865MHz RF Power Output.....10mW(max.) Oscillation Mode...PLL synthesized Frequency Stability.....+/- 0.005% Maximum Deviation...+/-48KHz with limiting compressor Spurious Emission....>60 dB below carrier frequency T.H.D....<1%(at 1KHz) Battery...DC 3V(1.5v x 2 AA size batteries) Tone Key.....32.768KHz Mic Unit....Uni-directional condenser unit LED Indicator....Power ON-OFF and low battery Current Consumption....65 +/- 5mA Dimension(mm)WxHxD....66 x 97 x 25 DESIGN AND SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.
INSERTING BATTERIES INTO THE HANDHELD/ BODYPACK TRANSMITTER:

Push to open the battery cover and insert batteries into the battery compartment conforming to the polarity (+)(-) marks. The transmitter can not work with incorrectly inserted batteries. When push the ON/OFF switch to ON to switch the power on, the LED will flash momentarily. If the battery has sufficient power, the LED flashes once. If the LED stayed on, it indicates that the battery has insufficient power and should be changed soon. If the status LED fails to flash, the battery is either dead or not positioned correctly, and you should correct the positioning or change the battery. Push back the battery cover to click it shut.
SETTING UP THE HANDHELD TRANSMITTER:
Switch the receiver power on and check the frequency and volume level. Switch the transmitter and hi-fi appliance (amplifier, tape deck etc.) power on. Test the microphone and adjust the levels on your mixer or amplifier. When using a standard audio cable with 1/4 phone plugs to plug into the MIC IN on the audio mixer or on the amplifier, please turn the Volume Level Control on the receiver to around 1 oclock position, the output level for balanced and unbalanced output is about at 77mV. When using a standard audio cable with 1/4 phone plugs to plug into the LINE IN on the mixer, please turn the Volume Level Control on the receiver to around MAX position, the output level for unbalanced and balanced output is about at 770mV.
SETTING UP THE BODYPACK TRANSMITTER: CONNECTING A MICROPHONE:
Open the battery cover. Push the MIC/LINE switch to MIC and use the supplied screwdriver to adjust the GAIN at appropriate position. Plug the mini XLR connector end of the microphone cable into the audio input connector on the bodypack transmitter. Switch the transmitter and hi-fi appliance (amplifier, tape deck etc.) power on. Test the microphone and adjust the levels on your mixer or amplifier.

EINLEITUNG::

Herzlichen Glckwunsch zum Erwerb einer UHF-drahtlos-Anlage von GEMINI. Diese, nach dem neuesten Stand der Technik hergestellte Anlage, ist mit einer limitierten Garantie von drei Jahren versehen. Bitte vor Gebrauch der Anlage unbedingt diese Anweisungen beachten.
Um Strungen(Interferenzen) zu vermeiden, stellen Sie den Empfnger nicht zu nahe an Metallgegenstnde und arbeiten Sie mit dem Sender nicht zu dicht am Empfnger. Vermeiden Sie Strungen durch Radios, Fernseher oder andere Drahtlosanlagen.

SYSTEM AUSSTATTUNG:

UX-16 M besteht aus dem UX-16 Empfnger und dem Handsender XM-16 UX-16 H besteht aus dem UX-16 Empfnger, Taschensender XB-16 & dem Headset HSM-2 UX-16L besteht aus dem UX-16 Empfnger, Taschensender XB-16 und dem LAV-1 Lavaliermikrofon 16-Band UHF-Frequenzen, Synthesizer gesteuert PLL-Schaltkreis Hohe bertragungsempfindlichkeit bei niedrigstem Rauschen Stabile und hochqualitative SMT-Platinen Regelbare Rauschsperre (Squelch) XM-16 hat ein dynamisches Mikrofon mit Nierencharakteristik eingebaut HSM-2 ist mit einem Electretkondensatormikrofon bestckt LAV-1 ist mit einem Electretkondensatormikrofon bestckt

Afin dobtenir une qualit sonore optimale et dviter tout parasitage, veuillez rgler le niveau sonore en respectant les instructions suivantes.
INSERTION DES BATTERIES/PILES DANS LEMETTEUR:
Enlever le capot ou capuchon et insrez les batteries/piles en prenant soin de respecter la polarit +/- de ces dernires. Lmetteur ne fonctionnera pas si les batteries/piles ont t insres de faon incorrecte. Positionnez la touche power sur ON, la LED clignote une fois indiquant que les batteries/piles de lmetteur sont suffisamment charges. Si la LED reste allume, cela indique que les batteries/piles sont faibles et doivent tre changes ou recharges trs prochainement. Si la LED ne sallume pas, cela indique que les batteries/piles sont vides et doivent tre changes, recharges ou positionnes correctement. Remettez le capot ou capuchon en place jusqu entendre le clic de verrouillage.
INSTALLATION/UTILISATION DE LEMETTEUR MICRO MAIN:
Positionnez la touche du rcepteur power sur ON, vrifiez la frquence dutilisation et le niveau du volume. Allumez lmetteur et le reste de votre installation (console de mixage, amplificateur, lecteur K7, CD, etc). Vrifiez le bon fonctionnement de votre microphone en ajustant le niveau sonore de votre installation (console de mixage, amplificateur). Lorsque vous utilisez un cordon audio Jack 6.35 afin de relier le rcepteur lentre Micro de votre console de mixage ou de votre amplificateur, rglez le volume gnral sur 1 heure, le niveau de sortie est alors de 77mV. Lorsque vous utilisez un cordon audio Jack 6.35 afin de relier le rcepteur lentre Ligne de votre console de mixage, rglez le volume, rglez le volume gnral de votre amplificateur au maximum, le niveau de sortie (symtrique ou asymtrique) est alors de 770mV.
YOU IN THE USA: IF YOU EXPERIENCE PROBLEMS WITH UNIT, CUSTOMER THIS UNIT, CALL 1-732-738-9003 FOR GEMINI CUSTOMER SERVICE. NOT ATTEMPT TO SERVICE. DO NOT ATTEMPT TO RETURN TO YOUR THIS EQUIPMENT TO YOUR DEALER.
Parts of the design of this product may be protected by worldwide patents. Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. Gemini Sound Products Corp. shall not be liable for any loss or damage whatsoever arising from the use of information or any error contained in this manual. No part of this manual may be reproduced, stored in a retrieval system or transmitted, in any form or by any means, electronic, electrical, mechanical, optical, chemical, including photocopying and recording, for any purpose without the express written permission of Gemini Sound Products Corp. It is recommended that all maintenance and service on this product is performed by Gemini Sound Products Corp. or its authorized agents. Gemini Sound Products Corp. will not accept liability for loss or damage caused by maintenance or repair performed by unauthorized personnel.

Worldwide Headquarters 120 Clover Place, Edison, NJ 08837 USA Tel: (732) 738-9003 Fax: (732) 738-9006
France Gemini France (GSL) 1, Allee dEffiat, Parc de lEvnement, 91160 Longjumeau, France Tl: + Fax: + Germany Gemini Sound Products GmbH Liebigstr. 16, Haus B - 3.0G, 85757 Karlsfeld, Germany Tel: 08131 - 39171-0 Fax: 08131 - 39171-9 UK Gemini Sound Products Unit C4 Hazleton Industrial Estate, P08 9JU Waterlooville , UK Tel: 00880 Fax: 00990 Spain Gemini Sound Products S.A. Rosello, 516, 08026 Barcelona, Spain, Tel: 349-3435-0814 Fax: 3493-347-6961
Gemini Sound Products Corp. 2004 All Rights Reserved.